Aligning SQL reports in a region so that all top edges are aligned
I have 3 SQL report regions in column 2. I would like these to display so their top edges are aligned.
40 Approved Tests Report (Column 2) Conditional
60 Unapproved Tests Report (Column 2) Conditional
80 Approved Count by Build Report (Column 2) Conditional
What actually happens is the reports are all centered vertically around the middle of the largest (tallest) report. Here's a crude ASCII picture:
Approved Tests
Category #
Area 1 100
Area 2 100 *Unapproved Tests*
Area 3 100 Category # *Approved Count by Build*
Area 4 100 Area 1 50 11.0.1 700
Area 5 100 Area 2 50
Area 6 100
Area 7 100
Since the leftmost report is the tallest, the other two reports end up centered vertically around the middle of the leftmost report.
Instead, I'd like all the top edges aligned, like this:
Approved Tests Unapproved Tests Approved Count by Build
Category # Category # 11.0.1 700
Area 1 100 Area 1 50
Area 2 100 Area 2 50
Area 3 100
Area 4 100
Area 5 100
Area 6 100
Area 7 100
Nothing I've tried so far has worked. Anyone have an idea how to accomplish this? Thanks...
You might try wrapping the regions in html regions that essentially give you the ability to specify a valign=top for the report regions.
So, your regions look like this:
30 Report Start - contains region source = (div)<table width="100%" cellspacing="0" cellpadding="0"><tr><td valign="top">
40 Approved Tests Report (Column 2) Conditional
45 Report 2 Start - contains </td><td valign="top">
60 Unapproved Tests Report (Column 2) Conditional
65 Report 3 Start - contains </td><td valign="top">
80 Approved Count by Build Report (Column 2) Conditional
85 Report End - contains "</td></tr></table>(/div)"
Replace () with the angle brackets
Maybe there is a more elegant solution with templates or page level CSS or something..
But that should work.
Edited by: Bob37 on Sep 17, 2010 3:33 PM
Edited by: Bob37 on Sep 17, 2010 3:33 PM
Similar Messages
-
Hi all,
at a customer’s site I’ve a problem with a fresh installation of Backup Exec 2014. Every backup (full or incremental) always reports the following
error: “An unexpected error occurred when cleaning up snapshot volumes. Confirm that all snapped volumes are correctly re-synchronized with the original volumes.”.
It’s not a Backup Exec problem itself, also backups using “Windows Server Backup” failing with the same error.
On this site I have three servers; the error is only generated for one of them. Here’s a short overview:
Server1: Windows Server 2012 R2, latest patchlevel, physical machine, Domain Controller and Fileserver. Backup Exec is installed on this machine,
backup is written directly to SAS tape loader. There error is generated on this server.
Server2: Windows Server 2008 R2, latest patchlevel, virtual machine, running on Citrix Xen Server 6.2. Used for remote desktop services, no errors
on this server.
Server3: Windows Server 2012 R2, latest patchlevel, virtual machine, database server with some SQL Instances, no errors on this server.
As I said, error is reported only on server1, no matter if it is a full or an incremental backup. During the backup I found the following errors
is the event log (translated from a german system):
Event ID: 12293
Volume Shadow Copy Service error: Error calling a routine on a Shadow Copy Provider. "{89300202-3cec-4981-9171-19f59559e0f2}" an error occured. Routinedetails Error calling Query(). [0x80042302] [hr = 0x80042302, unexpected component error of
the Volume Shadow Copy Service.
Process:
Volume Shadow Copy polling
Volume Shadow Copy delete
Context:
Executioncontext: Coordinator
Executionkontext: Coordinator
And
Event ID: 8193
Volume Shadow Copy Service error: Unexpected error calling Routine "IVssCoordinator::Query" hr = 0x8004230f, Unexpected error Volume Shadow Copy Service Provider
Process:
Volume Shadow Copy delete
Context:
Executioncontext: Coordinator
There are some articles about this error in the knowledge base or web which does not help or do not apply to my environment for example:
http://www.symantec.com/business/support/index?page=content&id=TECH38338&actp=search&viewlocale=en_US&searchid=1423724381707
What I already have tried:
Disabled Antivirus during the whole backup
Installed latest Service Pack for Backup Exec
Rebooted the server
vssadmin list writers do not show any errors
consult eventid.net for other possible solutions
no limits set for vaa
Anymore ideas from you guys?
Best regards,Hi Shaon,
vssadmin list providers gave the following output:
vssadmin list providers
vssadmin 1.1 - Verwaltungsbefehlszeilenprogramm des Volumeschattenkopie-Dienstes
(C) Copyright 2001-2013 Microsoft Corp.
Anbietername: "Microsoft File Share Shadow Copy provider"
Anbietertyp: Dateifreigabe
Anbieterkennung: {89300202-3cec-4981-9171-19f59559e0f2}
Version: 1.0.0.1
Anbietername: "Microsoft Software Shadow Copy provider 1.0"
Anbietertyp: System
Anbieterkennung: {b5946137-7b9f-4925-af80-51abd60b20d5}
Version: 1.0.0.7
Unfortunately theres not Symantec VSS Provider listed.
Best regards,
Christoph -
Hey Guys,
I need some advice. I had about 9000 pitures and photos in my camera roll folder.
I wanted to manage all these pictures into separate folders for easier access.
I imported all the pictures onto my pc, and created and managed the pics.
I synced the phone and excluded the photos,as advised on the site.
The I disconnected the phone, connected again and included the pictures.
On the coclour tab it indicates that all the pictures are there, after syncing,
but on my phone, nothing appears.
Am I doing something wrong? Is there another way of importing my pictures
onto the phone and keeping the separate folders?
Thanks,If you don't find an iTunes backup as suggested above, another possibility is that the phone was setup to automatically back up to iCloud. You can go to Settings > iCloud > Storage & Backup > Manage Storage to see if your device name is listed there. If it is, the section titled "How do I restore an iCloud Backup if my device is already set up for use?" in the following link gives directions on how to resore it: http://support.apple.com/kb/TS4036
Also, I'm sorry to hear you lost 5 years of pictures. Having them in one place (as you unfortunately found out) is not a good idea as all kinds of things can happen including loss of the phone. If you have a computer it is a good idea to periodically import them to the computer where you can see that they have successfully transferred to a second location. Following is instructions on how to do that if you want to in the future: http://support.apple.com/kb/ht4083 -
I HATE my new MACBOOK PRO, it will not let me open any PDF files and I downloaded the ADOBE READER three freaking times and it keeps saying that all the files are corrupt or damaged. I would rather have my 2008 Dell at this point. what is wrong with this thing
Perhaps the PDF files are corrupted.
Hit the command key and spacebar, a blue Spotlight in the upper right hand corner appears, now type Preview and press return on the Preview program.
Now you can try opening the PDF's from the file menu and see what's going on.
If they are corrupted, perhaps they are trojans from your Windows PC or gotten from a bad location online.
Download the free ClamXav and run a scan on the possibly infected folder. -
going to Italy in the fall Have read that all European phones are sold unlocked. I don't want to spend a fortune on roaming. Is it better to unlock this phone and get an Italian carrier upon arrival or should I just buy a local throw-away phone when I get there?
going to Italy in the fall Have read that all European phones are sold unlocked. I don't want to spend a fortune on roaming. Is it better to unlock this phone and get an Italian carrier upon arrival or should I just buy a local throw-away phone when I get there?
-
"SUMIF requires that all range arguments are the same size."
I just downloaded the Mac app Numbers for the first time today and opened an microsoft excel sheet from my old PC. In every cell where I have a SUMIF function is has an error icon in it. When I click the icon is says, "SUMIF requires that all range arguements are the same size." I tried retyping the function and it did not change. What else can I do to fix this issue? Is SUMIF supported on the Numbers app? Thanks.
Jace,
Sumif does work in Numbers, all versions. There is just some problem with the import translation of the spreadsheet.
If you will post a screen shot of the layout of your document and Paste the actual expression here in your post so we can examine it, we may be able to help.
Jerry -
How to validate that all the components are running healthy in 12.1.1
Hi All,
I have just installed EBS 12.1.1, Is there any way to validate that all the components are running healthy?
Thanks in Advance.Oracle-User wrote:
Hi All,
I have just installed EBS 12.1.1, Is there any way to validate that all the components are running healthy?You can verify that from OAM or from "adopmnctl.sh status" command.
Please see old threads which discuss the same topic.
https://forums.oracle.com/forums/search.jspa?threadID=&q=Checklist&objID=c3&dateRange=all&userID=&numResults=15&rankBy=10001
https://forums.oracle.com/forums/search.jspa?threadID=&q=Health+AND+check&objID=c3&dateRange=all&userID=&numResults=15&rankBy=10001
https://forums.oracle.com/forums/search.jspa?threadID=&q=Checklist+AND+R12&objID=c3&dateRange=all&userID=&numResults=15&rankBy=10001
Thanks,
Hussein -
TS4268 my imessage and facetime tell me that all my contacts are not registered
My ipod touch says that all my contacts are not registered and so i cannot facetime them or imessage, but it was working earlier. help please
Apple problem
http://www.apple.com/support/systemstatus/ -
Hello,
We had to change the feed adress (<itunes:new-feed-url>)and the epsiode adresses in the feed because the feed and the episode-files are on a new server. Now when i open my iTunes subscription of our podcast all the episodes of my podcast are downloaded again (although i have downloaded them already).
My Question therefore is: How can I make the changes in my feed and avoid that all the episodes are reloaded?
Maybe have an answer?
Thank you very much.Thank you very much for your answer
As I see now, our 'guid' tags contain the episode URLs
To avoid this problem in the future i would like to change guid tags. Can you please tell me how a guid tag should look like if it is not the URL?
Thank you for helping us!
ps now it looks like this eg:
<guid isPermaLink="false">http://www.castyourart.com/podcasts/213_thinkglobal_en.mp4</guid> -
I can't download Ikea 3D kitchen planner. It's really frustrating - a message is appearing on my mac book pro that I ned to get info and check that various files are unlocked. I've checked that all other requirements are fulfilled, still won't download. Any help very gratefully received. Thank you.
Hi, I'm not really very good with computers and am having the same problems when trying to install the Ikea 3D kitchen planner, please could you take me through the steps?
1. Download (save) the disk image file 2020PluginInstaller.dmg
I double click on the link which says "Install 3D Planner"
I agree to the t&cs
A file downloads to my download folder called 2020PluginInstaller_IKEA.dmg
2. Mount the disk image (open/run the downloaded file) if not mounted automatically
I double click on the downloaded file
3. Find the 2020PluginInstaller window (might be behind the window on top)
A small window opens up with a lego brick called 2020PluginInstaller_IKEA.dmg and a folder called Internet plug ins. I highlight the lego brick and do File, Get info and unlock it
4. Drag the lego piece to the folder (if you do not have admin privileges you will be prompted to authenticate)
I do this and put in a password to authenticate
5. Restart the browser (it is not enough to close the browser window, you need to restart the browser
application)
I've tried restarting Safari, I've tried re-starting the computer
6. Access the same link and you will now see the Start button and be able to start planning your room!"
When I go back to the IKEA kitchen planner I don't see a start button, I just see the exact same screen as before prompting me to install the 3D planner
Please can you help? -
I have an iPhone 4S and while upgrading to OS 8.3, I noticed that all my contacts are gone. Can I connect to my iMac OS Yosemite 10.10.3 and transfer contacts directly onto my phone?
Hey there denise.ca,
I see that you have a question about one of the functions of USB syncing. To answer your question, yes, you can sync contacts from your computer to your iPhone using USB syncing and iTunes:
Info: Sync your contacts and calendars.
Sync your iPhone, iPad, and iPod with iTunes using USB - Apple Support
https://support.apple.com/en-us/HT201253
Thanks for using the Apple Support Communities!
Cheers,
Braden -
during the verification phase of burning photos it fails yet it seems that all the photos are there?
Greetings,
Verification occurs after the burn is complete. The computer goes back to check the disk it just completed burning for errors. The disk is burned, it just didn't burn to the computer's satisfaction and may contain errors that will prevent it from working either on this computer or others. Then again it may work fine if it is a very minor error.
Common causes:
Low quality DVD/CD media
DVD/CD media that does not match the specifications for the drive in the computer
Resolutions:
Buy a brand of DVD/CD that has a reputation for making quality media
Check to see what speeds your optical drive in your computer supports: http://support.apple.com/specs/#imac
--- Once you locate your model on the specs page search for the word "optical" and make note of the speed of disks the drive uses. If your drive says it burns at 8x for example and you purchase a 16x disk then the disk does not match the drive.
Hope that helps! -
I just used a creative cloud , but the thing is that all the apps are trial . Did I buy a trails?
if that is Tell me how Am I going to get my money back
thanks .Log out of your Cloud account... Restart your computer... Log in to your paid Cloud account
-Sign in help http://helpx.adobe.com/x-productkb/policy-pricing/account-password-sign-faq.html
or
A chat session where an agent may remotely look inside your computer may help
Creative Cloud chat support (all Creative Cloud customer service issues)
http://helpx.adobe.com/x-productkb/global/service-ccm.html -
How do I synch my iPad 2 to my Address Book so that all my contacts are reproduced? I'm having difficulty find the place and directions for the iiTunes Store.
This is selected under the Info tab for your iPad sync preferences with iTunes.
-
Export all sql reports in a region to csv or pdf
Hello there,
I have a region on a particular page in apex and that region has about 12 different sql query reports.
I have enabled csv option for each of them so there are 12 links to export each report. However
I would like to have only 1 link which will save the contents of all the reports to csv or pdf. The
column headings are different for some of these reports but wanted to know if something like this
is possible.
Thanks in advance for reading this.You might try wrapping the regions in html regions that essentially give you the ability to specify a valign=top for the report regions.
So, your regions look like this:
30 Report Start - contains region source = (div)<table width="100%" cellspacing="0" cellpadding="0"><tr><td valign="top">
40 Approved Tests Report (Column 2) Conditional
45 Report 2 Start - contains </td><td valign="top">
60 Unapproved Tests Report (Column 2) Conditional
65 Report 3 Start - contains </td><td valign="top">
80 Approved Count by Build Report (Column 2) Conditional
85 Report End - contains "</td></tr></table>(/div)"
Replace () with the angle brackets
Maybe there is a more elegant solution with templates or page level CSS or something..
But that should work.
Edited by: Bob37 on Sep 17, 2010 3:33 PM
Edited by: Bob37 on Sep 17, 2010 3:33 PM
Maybe you are looking for
-
Allow BBID on multiple Devices!!
Allowing people to use their bbid on multiple devices is a must!! please add this function ASAP
-
What is this error just happend
what is this error Process: Safari [2028] Path: /Applications/Safari.app/Contents/MacOS/Safari Identifier: com.apple.Safari Version: 5.0.5 (6533.21.1) Build Info: WebBrowser-75332101~1 Code Type: X86 (Native
-
User Master Record : Which table the Email Id stored?
Hi All, Which table and what is the field the Email id stored in. I checked the USR02 and some other tables and I did't find it. Thanks. Rgds, Raj.
-
When I click on a video in iphoto, it doesn't automatically play on Quicktime like it used to. I have to drag the video to the QT icon in the dock. I installed a new HD and Snow Leopard, and these videos are from my Time Machine backups. They play fi
-
SLD auto update of SAP's realease versions
Hello, I heard that the administrator has to download manually a file with the current release version informations and put this file to the neccessary file. Is this the normal way or is there a possibility to download the files automatically? Thank