All but EPMA 11.1.1.3 working
Through some kind of miracle, I actually managed to install 11.1.1.3 on a 32-bit Windows 2003 Server VM and got everything (EAS, Annotation Server, Apache, Calc Manager, Essbase, FDM, HFM, Financial Reporting, OpenLDAP, Shared Services, EIS, Profitability, HPS, RMI Registry, WA, Workspace Agent, and Workspace Web Application) installed and actually working.
I will not embarass myself publicly with the number of times I had to install to get to this stage or how long it took. It was ugly, but luckily VMWare Workstation has a really nice snapshot function. If I ever needed confirmation that I am not an installer, this experience cemented that notion.
Okay, the whine is over, here is the question -- I cannot get EPMA to run. What am I doing wrong?
EPMA Architect - Web Application works (the service runs, that is), as does EPMA Data Syncronization - Web Application, but the .Net JNI Bridge service will not start, nor will Engine Manager, Event Manager, Job Manager, or Process Manager.
I think Process Manager is the key to all of this. When I try to start it, there is no error in epma.log or in epma_err.log.
However, when I go into Windows Event Viewer, and see the failure to start of Process Manager, I see the following:
Service cannot be started. Hyperion.DimensionServer.ProcessManager.Interface.ProcessManagerException: Cannot initialize the Session Manager. ---> Hyperion.DataAccessLayerCore.DataAccessLayerException: Database connectivity could not be established. ---> System.Data.SqlClient.SqlException: A network-related or instance-specific error occurred while establishing a connection to SQL Server. The server was not found or was not accessible. Verify that the instance name is correct and that SQL Server is configured to allow remote connections. (provider: TCP Provider, error: 0 - No connection could be made because the target machine actively refused it.)
at System.Data.ProviderBase.DbConnectionPool.GetConnection(DbConnection owningObject)
at System.Data.ProviderBase.DbConnectionFactory.GetConnection(DbConnection owningConnection)
at System.Data.ProviderBase.DbConnectionClosed.OpenConnection(DbConnection outerConnection, DbConnectionFactory connectionFactory)
at System.Data.SqlClient.SqlConnection.Open()
at Hyperion.Data...I see the SQL error, but wonder why no other piece of the EPM install has an issue with SQL Server. This install uses SQL Server Express 2005. I read the steps on this MSDN page -- I already had all of these settings and am not running a firewall.
Any help would be most appreciated -- I am so close on this, I can almost taste it.
Regards,
Cameron Lackpour
Hi Cameron,
I have a vm using SQL server express 2005, it is running without any issues though I can replicate the error if I change connection details for the JBDC configuration, I updated the port in the config from 1433 to 14331
Started up process manager, failed..
Service cannot be started. Hyperion.DimensionServer.ProcessManager.Interface.ProcessManagerException: Cannot initialize the Session Manager. ---> Hyperion.DataAccessLayerCore.DataAccessLayerException: Database connectivity could not be established. ---> System.Data.SqlClient.SqlException: An error has occurred while establishing a connection to the server. When connecting to SQL Server 2005, this failure may be caused by the fact that under the default settings SQL Server does not allow remote connections. (provider: TCP Provider, error: 0 - No connection could be made because the target machine actively refused it.)
at System.Data.ProviderBase.DbConnectionPool.GetConnection(DbConnection owningObject)
at System.Data.ProviderBase.DbConnectionFactory.GetConnection(DbConnection owningConnection)
at System.Data.ProviderBase.DbConnectionClosed.OpenConnection(DbConnection outerConnection, DbConnectionFactory connectionFactory)
at System.Data.SqlClient.SqlConnection.Open()
at Hyperion.DataAccessLayerCore.DALConnectionT...
If you go into \Hyperion\common\config\9.5.0.0 and double click epmsys_registry.bat, it should generate a web page.
In there should be your (DATABASE_CONN) for EPMA
e.g.
Property Name Property Value
version 9.5.0.0
dbUserName epmadmin
dbPort 14331
dbName EPMA
dbPassword s1GPi7aeT5zUdQIpxfsiJQ
dbJdbcUrl jdbc:hyperion:sqlserver://epmversion11:14331;DatabaseName
Does your connection details look all correct.
I take it you are using the default instance with SQL server express e.g. <SERVERNAME>\SQLEXPRESS
You can that when you log into SQL Server Management Studio express.
New years eve and Cameron has turned to the darkside known as EPMA.... definitely more to life :)
Cheers
John
http://john-goodwin.blogspot.com/
Similar Messages
-
When I click on some links, it does not open them. It use to work just fine. I have tried everything to help this situation. Many people are complaining about firefox 4. Maybe this is a bug.
Hello,
I have checked all the above trouble shooting suggestions. I still am having the same problem.
I use Firefox as my default browser and have it checked off as per your last email. I am only having this problem in my emails. I cannot open url links in my emails anymore by double clicking on the mouse. I have to right click the mouse and choose open in a new window. It will then open that url link and take me to the website link.
If I try this by double clicking the url link, it takes me to a blank page with this "https://mail.go....er=ohh14rw8mbn4"
at the top of the page in the tab. -
I had/have avg toubble and now firefox will not start. I uploaded a new version but made no difference. If I click on it the time symbol comes up for a few seconds and than nothing. When I restart the computer though a small window comes up alerting me not to end the programm till it scaned it. So I figure after clicking on it something must be running in the background. But no symbol comes up on the dectop or in the application manager.
Any ideas?
Regards FranzI had/have avg toubble and now firefox will not start. I uploaded a new version but made no difference. If I click on it the time symbol comes up for a few seconds and than nothing. When I restart the computer though a small window comes up alerting me not to end the programm till it scaned it. So I figure after clicking on it something must be running in the background. But no symbol comes up on the dectop or in the application manager.
Any ideas?
Regards Franz -
Help... Have ate in living room & bedroom & I could works fine on iPhone4 as well as ipad2 wifi. I have home sharing enabled on all but when I rented a movie it was all good & charged but the download took over 24 hours & only in the bedroom.... Please help
The remote app can either automatically find libraries available on a network (with home sharing available) or if you haven't got home sharing enabled, you can manually pair an itunes library with the remote app (using a number that is generated by the app and then typed into the itunes library).
That is why I am so confused, as it seems to be the home sharing that is the problem! -
I got windows 7 and I downloaded itunes and at first it said it was incompatible but then i got it to work. Now all of a sudden my itunes won't open. It keeps saying it is incompatible. Again??
Try the following document, only be sure that none of the boxes in the compatibility mode tab are checked (not just the compatibility mode box itself):
iTunes for Windows: How to turn off Compatibility Mode -
My apple ID password works for all of my devices but one. i only have one account and have changed the password several times but still cannot get it to work on my iPhone. any suggestions would be appreciated.
Thanks for the suggestion, Chris. I actually did not resolve the issue which is why i did not post an answer.
it turns out that my iphone seems to default to an incorrect User ID (it defaults to an @me account, which is not something that i have ever used).
even when i change the User ID in my settings for the iTunes store, it still appears when i attempt to get updates for my existing apps. however, it does seem to use the correct ID when i attempt to purchase new apps.
If someone actually had an answer to correct this, i would love to update my existing apps.
Thank you. -
Bookmarks are not syncing to ONE of my Macs, but showing up on other Mac (work), iPhone 4 and iPad 1. Macs are on Mountain Lion. Tried all of Apple's suggestions - and the one Mac is still not updating/syncing Bookmarks or Reading List. What's going on? Do I have to wait to OS update? It seems lots of peolple were having issues before ML, but I as fine. Since ML, I am having all kinds of issues!
Yeah, I literally have tried everything except deleting my iCloud account (I'm close, but that would require so many changes that it is way too painful to consider at this point).
I am still waiting to hear back from Apple Support. Hopefully something can be done, or they can do a reset on their end.
Thanks for taking the time to respond though, much appreciated! -
Hi everyone, hope you can help. My iphone was stood on and broken and i hadnt backed it up to itunes, i have had it repaired, it looks brand new but it has no audio at all, i have very important voice recordings that i need off the phone i can see them running but cant hear them, ive tried earphones but still nothing, the phone only works for a short period of time when plugged into the mains and has no internet connection now, is there any way ref software etc that i can get these messages off my phone, im desperate
Thanks, Mellanni xIf it will not connect to your computer, and it will not connect to the Internet, either via WiFi or cellular data, then there is no practical way to extract the information. There are no magic words that will fix the broken hardware.
You could try a 3rd party data recovery service, but doing so will forfeit your right to a discounted out of warranty replacement. Only you can decide it it's worth that. -
The songs on my Ipod Classic wont play at all although you can feel and hear the machinery working hard. The tracks are not playng at all but you can see the Ipod rewinding them all and returning to the album. And this happens to the second IPOD I just got!
First off, I would STRONGLY suggest that a external hard drive would make you life much easier by at least being able to back up your songs on the external drive for when you need them. Even if you don't want them in the iTunes library, you can have them all ready on the external to be re-added as needed. You can get 100's of gigs for under $100 shipped.
Anyway, since you used Yamipod, are all the songs back on the computer? If so, I would go ahead and restore the iPod, let iTunes then resync everything back to the iPod, then switch it back to manual and see if the restore and resync clears up the issue.
Patrick -
Can not start up on my Macbook pro. All I get is a grey spinning wheel. Tried all the Startup key combinations and nothing works. I reset the NVRAM and nothing. I booted with start up disk , ran disk repair and all is ok. Tried to re-install OS but when I get to designating drive its blank. When I go to startup disk there is a "?" mark. When I restart under startup disk search for a drive it still comes up with nothing. Before I got the grey spinning wheel I had a locked screen. Could not move curser or click on anything. Finally just shut down. Thank you in advance for any help!
Shouldn't still have a 'beachballing'... if the drive is being found and the system is trying to boot from it but is having problems, I would suggest looking over ds store's user tip - Step by step to fix your Mac.
It's likely either something corrupt in your system files or a failing hard drive. But follow ds's steps until you find the cause of the problem.
Good luck,
Clinton -
Hi. I am running Windows 8.1 on a 64 bit Toshiba Satellite P70-A laptop with 16Gb of RAM. I have installed Adobe Creative Suite 6 - Master Collection. All is fine except for Adobe Acrobat X. It runs OK for a while, but then suddenly it won't work. I uninstall it, re-boot and re-install again, bit the same process repeats itself and once again I have to uninstall and re-install again. I don't know if windows update interferes with it? Has anyone else had a similar problem? Is it fixable?
I think you'd be much better off asking in the Acrobar forum, Acrobat
-
i have all my music under my user id. i would like for my wife to have access under her user id. i tried using Home Sharing but can't get it to work.
http://support.apple.com/kb/HT3819 homesharing
http://support.apple.com/kb/TS2972 troubleshooting home sharing.
i <3 Homesharing. I enabled it at home, and where I work I use a mac so I enabled it on that computer as well so I can listen to my own music library while on breaks/lunch =) -
Hello, my iphone 5s fell, thereafter i tried taking a picture, the camera app just shows a black screen and hangs, the front camera works on other apps (such as facetime and skype) but the rear camera is not working, all other apps work perfectly well, how do i resolve this
Double tap Home button and delete Camera app from multitask-list.
Do a
Reset: Hold down the Sleep/Wake button and the Home button at the same time for at least ten seconds, until the Apple logo appears. Note: You will not lose any data
If problem persist, make an appointment with genius bar for evaluation. -
to reply to you all - but thanks for all the help - nothing has worked so far
You're welcome.
When you're signed in Your Stuff > Discussions towards the top right of the display gives you a similar list of the threads you've participated in. I save my bookmark with the name Active Threads.
tt2 -
Vacation Rule works for ALL but not for particular notification in Item typ
Hi,
I have a situation where Vacation Rule is Ignored when choose the select option in notification page of vacation rule and notifications were being sent to Original Approver (who created the vacation Rule) instead of delegate.
Vacation rule is working perfectly when choose the notification as ALL but is not working when given a particular message(Timecard Approved,Approve Requisition).
Below is some example of this inconsistent behavior:
1. Selected Item type as OTL Workflows for Employees, For this Item Type there are 3 Notifications as
TIMECARD_APPROVED,ERROR_MESSAGE,TIMECARD_APPROVAL_INLINE in select opition.
If i select the TIMECARD_APPROVAL_INLINE notifications are going to delegate, and for TIMECARD_APPROVED not going to delegate.
2. Selected PO Approval, It contains only one Notification(PO_PO_APPROVE). So it is working fine.
3 Selected PO Requisition Approval,it contains the 4 notifications.
PO_REQ_APPROVE_SIMPLE_JRAD, PO_REQ_APPROVE,PO_REQ_INVALID_FORWARD,PO_REQ_NO_APPROVER.
If i select the PO_REQ_APPROVE_SIMPLE_JRAD notifications are going to delegate, and for PO_REQ_APPROVE not going to delegate.
Any inputs on this.
Version 11.5.10.2 RUP 6.
Regards,
AjithHi,
on problem I spot is that all your components created by the forEach loop have the same ID value. I suggest you change the ID to e.g. id="soc_#{item.index}" for zhe select one choices. In addition, I don't see where you refresh components after the change
Frank
Maybe you are looking for
-
SQLDeveloper 3.2 - I can't see trigger code
Hi people In some cases, I can't see trigger code. I didn't find a pattern to determine what kind of trigger has an invisible code. For example, in my instance I can't see code of SCOTT.AFTER_INS_UPD_ON_EMP trigger, but I see it in SQL tab for SCOTT.
-
Hallo, I have written a Java-applet, that inherits JApplet from Swing. When I try open it in a browser the Java-Console writes: java.lang.NullPointerException at sun.plugin2.applet.JNLP2Manager.initialize(Unknown Source) at sun.plugin2.main
-
PO confirmation XML not created
Good day We are experiencing some issues with our PO confirmations. When I say confirmations it is not the SES or GRN. In our system we create a SC in SRM this then gets approved in SRM and then a PO is created in the ECC backend. The XML is passed f
-
Officejet 4620 - Blank Ink not printing
Officejet 4620 all-in-one. Started having this problem last week- no black ink print. Brand new genuine cartridges in use(tried 3 separate cartridges straight from the box). Tried all solutions listed on the troubleshoot page to no avail(even thre
-
Renaming mutiple files (photos) outside of Iphoto
Hi, I Take a lot of digital photos, but do not use Iphoto as it puts all the photos in hundreds of different folders. I am wondering if I can use Automator to rename a batch of photos (ie. from dsc100001 to JohnsBirthday1 and so on). Any help would b