All of sudden, I can't launch iTunes as I get a popup saying "iTunes requires Quicktime 7.5.5 or later". I only have 7.4 currently and the apple site doesn't show anywhere to download Quicktime upgrade. Software Update detects no reqd updates. Help pls??
all of sudden, I can't launch iTunes as I get a popup saying "iTunes requires Quicktime 7.5.5 or later". I only have 7.4 currently and the apple site doesn't show anywhere to download Quicktime upgrade. Software Update detects no reqd updates. Help pls??
Here's a link to the QuickTime for Leopard 7.7 installer:
http://support.apple.com/kb/DL761
Similar Messages
-
My ipad 1 is stuck on IOS 4 as these IOS 5 update instructions do not work. When I use itunes update the software looks for an IOS 5 software update file and the apple site doesn't seem have one anywhere!
If you have an iPad 1, the max iOS is 5.1.1. For newer iPads, the current iOS is 6.0.1. For the iPad Mini the iOS is 6.0.2. The Settings>General>Software Update only appears if you have iOS 5.0 or higher currently installed.
iOS 5: Updating your device to iOS 5 or Later
http://support.apple.com/kb/HT4972
How to install iOS 6
http://www.macworld.com/article/2010061/hands-on-with-ios-6-installation.html
iOS: How to update your iPhone, iPad, or iPod touch
http://support.apple.com/kb/HT4623
If you are currently running an iOS lower than 5.0, connect the iPad to the computer, open iTunes. Then select the iPad under the Devices heading on the left, click on the Summary tab and then click on Check for Update.
Tip - If connected to your computer, you may need to disable your firewall and anitvirus software temporarily. Then download and install the iOS update. Be sure and backup your iPad before the iOS update. After you update an iPad (except iPad 1) to iOS 6.x, the next update can be installed via wifi (i.e., not connected to your computer).
Cheers, Tom -
hey iphone an iphone 3g and i only have about 13 apps and the yellow bar on itunes for my phone is way to big i deleted all my photos all my music every thing i ryed restoring ans all it still takes up space for sum reason ?? please someone help me
If Other (the yellow bar) is too big something is corrupted. The only solution (that I know of) is to restore from your most recent backup using iTunes (see http://support.apple.com/kb/ht1766).
-
I purchase my QuickTime 7 Pro registration key via a friend in USA as it was not available to residents in South Africa. I now have a new iMac and the registration code doesn't want to activate PRO. It works fine on my MacBook Pro. Do I have to buy a new registration code for my newiMac?
i'm in SA and it say Apple Support not available at the moment or something like that.
Just got the new iMac.
Still using MacBook Pro.
Files are on a external drive shared between these 2 mac platforms and I need to be able to
edit in QT 7 Pro on both as well.
The code was bought in August 2011. -
@I have my Adobe ID and the Adobe Digital Editions. But when I download an EPUB-ebook, I don´t see the ebook or "My Digital Editions-Bibliothek".What is the solution for this problem?
how can we solve the problem?
I have my adob.e ID, downloaded Adobe Digital Editions.
Whren I download EPUB-ebooks and want to use
Digital Editions, nothing happens and appears!??
Please give me a short feedback and help -
I'm looking for the old toolbar that doesn't double post the web adress and only has single line entries and the extension xpi doesn't work with my new computer
Mike wrote:
> Could someone tell me why this prototype-based lightbox
seems to work on one
> of my sites but not on the other?
>
> I literally took the exact same .js & css files,
copied them over from one
> site to the other, but it's only partially working on
the new site.
>
> Works :
>
http://www.roxanacampagiorni.com/
>
> Doesn't work :
>
http://www.vilverset.com/sample.html
>
> Been troubleshooting this one for days, and I'm stumped.
Script wants
> nothing to do with lightboxing HTML files on the new
site. Only straight
> JPGs. But it was written to work with them, and it
*does* work with them
> just fine on the *other* site.
>
> Where is the anomaly between the two sites that's
causing it to break in
> sample.html?
>
>
Not sure if this is relevant but on the page that works you
have these
js files linked - 4.....
<script type="text/javascript"
src="/scripts/jscripts.js"></script>
<script type="text/javascript"
src="/scripts/prototype.js"></script>
<script type="text/javascript"
src="/scripts/effects.js"></script>
<script type="text/javascript"
src="/scripts/control.modal.2.2.3.js"></script>
and on the page that doesn't - 3......
<script type="text/javascript"
src="/scripts/prototype.js"></script>
<script type="text/javascript"
src="/scripts/effects.js"></script>
<script type="text/javascript"
src="/scripts/control.modal.2.2.3.js"></script>
HTT
chin chin
Sinclair -
I am not seeing the weather in the notifications for 'today'. The weather app doesn't show up in the notifications dialog either. What to do?
Pappasbike wrote:
First make sure that Weather is listed in Notification Center, mine is a the very end of the list. If it's not go below to the Do Not Include list and see if it's there. If it is manually turn it on to appear in the main list.
Now when I swipe down from the home screen I get the date and any Today events, and below that a weather forecast stating the high and low for the day. If none of that is showing try shutting down and restarting your phone and see if that appears also make sure the Weather app is on one of your home screens, launch it from there and that alone may set everything up.
The weather app is just not listed. I did a soft reset, no improvement. I'm at a loss for anything else to try. Since the app is a system app, I can't delete and reload it.
This is hardly an earthshattering problem, but it bugs me. -
Iphone is a black screen and the apple logo won't show on screen
My iPhone has a black screen and the apple logo does not appear. it keeps saying voice overb run or mute on mute off.
Hey there Maggie,
Welcome to Apple Support Communities.
The article linked below provides troubleshooting tips that can help you resolve the blank black screen issue with your iPhone 6 Plus.
Get help with the screen on your iPhone, iPad, or iPod touch - Apple Support
If you see a solid color screen (black, white or blue)
Plug in your device to a power source. If you see the low-battery screen when you plug in, let your device charge for at least 10 minutes (20 minutes for iPad) before using it.
Reset your device while it's plugged in.
If resetting doesn’t fix the issue, restore your device.
If you still see the issue after you restore, contact Apple Support.
Cheers,
-Jason -
anybody able to help me with my setup for apple tv. i've followed the directions in the guide and my tv doesn't seem to register in part. it's weird because my tv system info identifies the apple tv but the screen never went black and it doesn't show anything, too, my imac doesn't seem to register the apple tv unit either
I would try connecting it to another tv to see if it works there if it does
then likely your tv can't handle the default resolution and you should lower it on the other tv
if not then you should connect it by usb to the computer and use itunes to restore it's firmware -
When I want to carry any video clip from youtube I can not because I do not find the word - Download - On top of that section, which usually I find when I use a browser other than Firefox.
I understand that much. On my MAC Mini, if you look above at original post, I CAN see both OS while in the Windows 7 partition or the MAC OS. This is NOT the case on my iMac. Again, when in the MAC OS I can see the windows partion and move information between the two that way. When in the WINDOWS partition, the only one that shows is the Windows OS from my computer or network. The only way you can tell its even a MAC is the bootcamp icon in the bottom right corner of toolbar. Both have same version of MAC OS so both should work same way.. When i double click on my computer, it should show both the Windows drive AND the MAC (as does my mini and another iMac 21.5 that i have). This iMac does not do that - only shows windows.
-
when I updated my Apple tv it now shows about 10 computers on my network which I only have one tv...how do I get rid of the other "computers" listed as they are all the same, this was not happening before I updated the Apple TV
It looks to be a bug. A reboot to computer and/or Apple TV may resolve it.
You can provide feedback to Apple and file a report.
https://www.apple.com/feedback/
https://bugreport.apple.com/ -
2nd generation ipod touch wont turn on. The screen blinks but the apple icon doesn't show up.
I have a 2nd generation ipod touch that I got from a friend. I drove all the way across the country (three day trip) and it worked perfectly. It was in a hard case and has no damages to it. I haven't dropped it or gotten water on it at all. But for some reason the screen wont turn on. It blinks on and off when I plug it into the charger (and theres like a soft clicking noise that I hear when the screen blinks) but the apple logo wont show up. And it doesn't seem to actually be charging. It doesn't seem to actually die all the way either.... It's weird.. but I know no damages have happened to it so I don't know what to do. I've tried to reset it (pressing and holding the home and power buttons) but that wont work either. Help?
Try:
- iOS: Not responding or does not turn on
- Also try DFU mode after try recovery mode
How to put iPod touch / iPhone into DFU mode « Karthik's scribblings
- If not successful and you can't fully turn the iOS device fully off, let the battery fully drain. After charging for an least an hour try the above again.
- Try another cable
- Try on another computer
- If still not successful that usually indicates a hardware problem and an appointment at the Genius Bar of an Apple store is in order. -
I have a CC subscription and the app builder is not showing the app after I "create app" in FB
what am I doing wrong?
Thank you; here's more information:
I've just used the Creative Cloud for the first time, and I made the mistake of using the wrong Adobe ID in DPS App Builder. I went through all the steps to the end in the wrong account, and now it is asking for a single edition serial number.
I then moved the folio to the right Adobe account, but I can't delete it from the first one, and when I try to "create app" in FB, nothing shows up in the App Builder.
I'm using v23 tools, with CS6 inDesign, on a Mac running 10.6.8, and the latest download of App Builder.
I see the app when I log into the wrong account but I can't delete it. I moved it over to the right account (the one I signed up for CC with) and it won't appear even when I rebuild in FB and sign in correctly to App Builder.
I'm not sure what to do from here... -
I have two yahoo email accounts but I want my main one to push email and the other one to be manuel or even fetch, is this doable?
You don't know what push means.
Push means new messages received at the incoming mail server are pushed out by the incoming mail server without the email client being used to access the account having to check the account automatically or manually which is called fetch. An account can be checked automatically without having to open the Mail app which is not push.
Manual with the Mail app on an iOS device is not the same as manual with an email client on your computer.
If you launch the Mail app, all email accounts will be checked for new messages even when manual is selected for an account. If manual is selected for an account, it should not be checked for new messages until to launch the Mail app. -
Every time I go to the itunes store, I get the pop up "Itunes has stopped working and must close"
Under Details are : Problem Event Name: APPCRASHHello, Hal R.
Thank you for the question. Try the steps in the article below as they may help with the issue that you are experiencing with iTunes becoming unresponsive or unexpectedly closing.
iTunes for Windows: Troubleshooting unexpected quits, freezes, or launch issues
http://support.apple.com/kb/TS1717
Cheers,
Jason H.
Maybe you are looking for
-
Problem in resetting the Page numbers
Hi, I am using to print PO report using XML publisher. The layout that is needed is Header ---- It cointains page number x of y ,po number,po creation date,and other details. Body ---- It cointains po lines and po headers data. end body After the bod
-
Activation failed due to sructure generation error.-URGENT
i tried to check in an activity but activation failed due to the foloowing error:PLEASE HELP VERY URGENT Development Component Build (2008-03-14 10:09:20) Component name: tablist Component vendor: worldbank.org SC compartment: worldbank.org_GDB
-
Hi, In my JTable, one of the column uses checkbox as cell editor. I like to know how to get the row index of the row where the clicked checkbox is in. Thanks Stephen
-
FlatFile to produce multiple xml Files
Hi - my requirement is I need to convert the below FF to xml format producing unique ID record and multiple Question and Answer Record under it. Output should be of this format :For 5 different IDs, 5 seperate xml's should be produced <ID> 000000001
-
Possible with larger timecode window with new FxPlug 3 functions?
Hi, One of the things I miss in fcpx is a larger timecode window. This is a must when working in pair with a reporter. The small standard timecode display is just too small and too hard to read from a distance. The new FxPlug 3 functions "allows deve