Allow an user to manage certain users

Hello,
I am new to User Management in wlportal4.0 with wlserver6.1. I was able to set
up RDBMS Realm for user authentication. Currently access to "http://localhost:7501/wlcsAppTools/index.jsp"
is restricted to only the role "Administrator". I can see that this mapping is
defined in the web.xml.
Instead of one "Administrator" role managing the entire users, I like to set up
certain users to manage certain other users. Is it possible? Can someone guide
me through the steps? Thanks a lot.

Only as a screen grab in default iPad manner – simultaneously push two physical iPad buttons.

Similar Messages

Allow All Users To Add List Items But Only Certain users To Edit Them (SharePoint 2013)

How do we allow all users to add items to a list, but only allow certain users to edit the list items? Site is SharePoint 2013. We have tried creating custom permissions. That does not seem to work.

I've setup a custom list on my SharePoint Foundation using a custom permission level to accomplish this. I setup a custom permission level on the site called 'Add Only to Lists' which allows adding an item to the list and setup the group with
the default read and the custom permission level and it works. The users in the group get the add item but do not get edit item, not even items they created themselves.
Any users who should have full edit permissions can be setup under the normal edit/contribute/design permission level and work normal.
Below is the Role Definition pulled via PowerShell and Role Assignments on the list in question. As well as a picture showing what it looks like to something assigned that role level.
Role Definition
Name : Add Only to list
Description : Can add items to a list but cannot edit or delete
Type : None
Hidden : False
Order : 2147483647
BasePermissions : ViewListItems, AddListItems, Open, ViewPages
List Role Assignments
Member : Home Visitors
RoleDefinitionBindings : {Read, Add Only to list}
Parent : IT Equipment Request
ParentSecurableObject : IT Equipment Request
The user can create a new item, but cannot edit items - not even items he created.

How can I allow the user to retake a quiz from the middle of it in Captivate 7?

Hello Captivaters,
I would like to force the learner to pass a quiz before he can continue on with the training. If he doesn't pass the quiz, he will need to go back and take it again. The "retake" button allows him to do this, but I will actually like to have 4-5 of these "quiz checkpoints" in the eLearning -- each separated with presentation material -- so that the user proves he understands the material before advancing.
Therefore I would like to create my own "retake" button at the end of every "quiz checkpoint" that takes the learner back to the first question of that checkpoint (not to the first question in the training). So far, I have been able to create a button that appears after he gets a certain amount correct to allow him to continue, and I want to create a button that appears that takes him back to the first question in the checkpoint if does not get the required amount correct and retake those questions. The first part is easy, but I also need to add the function or reassign some variable to allow the user to retake the quiz. I hope I am making sense.. Any help would be much appreciated!
- Ryan

It's great! Thanks again.
Here is the issue now. I guess it's not a huge problem, it's just if I can't find a better way, what I need to do will take a lot of time.
Like I mentioned before, I created this "results" slide that on enter either shows a "congrats" button or a "retry" button, depending on whether or not the user passed the quiz. I have copied this slide and pasted it behind all of the other sub-quizzes in the training, but when I do that, of course the link between the buttons and the conditional advanced action break.
As you know, when you duplicate a slide, all of the names of the objects on that slide are "refreshed" and are replaced with new generic names because you are in fact creating new objects as well. This means that I need to rename all of the objects on that slide (even though its a duplicate) and then replace all of the "old names" in the advanced action with these new object names.. Is there a faster way to do that?
Thanks again!!
Ryan

How to set "Allow external users who accept sharing invitations and sign in as authenticated users" programmatically?

Sharepoint 2013 online/office 365.
I am creating site collection programmatically using sharepoint Auto hosted app.
Now i want to set "Allow external users who accept sharing invitations and sign in as authenticated users" programmatically after site collection creation.
Is it possible through code? If yes please let me know how to do it?
Najitha Sidhik

For SharePoint 2013 Online, check below links:
http://office.microsoft.com/en-us/office365-sharepoint-online-small-business-help/manage-sharing-with-external-users-HA102849862.aspx
http://office.microsoft.com/en-us/office365-sharepoint-online-enterprise-help/manage-external-sharing-for-your-sharepoint-online-environment-HA102849864.aspx
https://www.nothingbutsharepoint.com/sites/eusp/Pages/SharePoint-Online-2013-Sharing-with-External-Users.aspx
http://blogs.office.com/2013/11/21/sharepoint-online-improves-external-sharing/
Please ensure that you mark a question as Answered once you receive a satisfactory response.

Allow every user to create subfolders

Hello everybody,
after some changes in our internal role system I need your help.
In BEX there you can go to
open query or open workbook.
Then hit the button "Roles"
There we can see the menu with all visible folders.
How can I allow every user to create subfolders within the folders he is already allowed to see?
As I activate a certain role even I (administrator) gets a greyed out view.
Is there a way that users can create new folders in a convenient way?
Thanks for your help!
Harry

I think the DNSAdmins group will give them too much control over the server (change forwarders, etc..).
Create a custom MMC snapin and assign related permissions. The picture below may give you an idea:
Mahdi Tehrani |
|
www.mahditehrani.ir
Please click on Propose As Answer or to mark this post as
and helpful for other people.
This posting is provided AS-IS with no warranties, and confers no rights.
How to query members of 'Local Administrators' group in all computers?

[SOLVED] Would like to allow a user to remotely reboot my box [SOLVED]

Hello,
Here's my problem, I've got two boxes gypsy and crow and gypsy has a habit of having the display lockup, I don't think the system is completely locked up so I'm pretty sure I can ssh and reboot it (since I set up ssh on gypsy, the box hasn't actually locked up, though, so I don't know for sure)
Becuase I'm paranoid, I don't want to allow ssh into gypsy to do anything BESIDES reboot, so I'm interested in what's the best way to implement this. I could stick the reboot command into .bash_profile for my dedicated reboot user, but if you're fast enough w/ ^c you (where you are, presumably, automated cracking software) could, concievably, kill the process before it's done running, and end up logged in.
This is going to be continued in a browser that isn't links.
Edit: Continued:
So I tried writing a shell script
#!/bin/bash
sudo reboot
and using that script as the login shell for the dedicated reboot user ("rebooter"), but I would get a permission denied error when I tried to login as the user then. (My sudoers file allows the user "rebooter" to run reboot w/o a passwd). So it seems like in princple you could make this work, I'm just doing somthing wrong.
But this raises another question, could I still manage to login to bash by interupting this script? I don't think so, becuase in this instance bash is not running interactively, please tell me if I"m wrong.
Is there maybe a better way to set this up? Maybe there's something I can do with the config to sshd to force login by the "rebooter" to force a reboot?
I guess there might also be some way for me to set things up with chroot so that if you managed to login as "rebooter" you couldn't do anything meaningful besides reboot anyway, but I haven't looked into this yet. If this is the best answer, go ahead and tell me to rtfm, but first I'd like to know if there's a simpler solution.
Last edited by pseudonomous (2008-09-27 00:57:23)

carlocci wrote:
you could change the user shell to something like this
carlocci:x:1000:100:sig. carlocci,,,:/home/carlocci:/usr/bin/sudo shutdown now -r
or
carlocci:x:1000:100:sig. carlocci,,,:/home/carlocci:/bin/bash -c sudo shutdown now -r
I tried this, and it didn't work, I think it gave me "permission denied" errors, so I wonder if I got the syntax wrong. what I was doing was using "usermod -s " to try and change the shell and I was confused as to how to properly put the white space in you need to run the command "sudo reboot".
Thanks, everybody for your suggestions, I will look more into an ssh key based-authentication. I don't really want to run webmin becuase I don't need to any remote administration besides rebooting, so webmin seems like overkill. I will report back after trying to set this up.
When I say "display locks up" I mean that, for some reason, either after boot or after I end a window manager session, my screen turns black and it looks like X is trying to restart but failing (there's a change in the shading on my monitor I associate with that) hitting control alt backspace doesn't help and trying to switch to one of the consoles doesn't work either. But I don't think the system is dead becuase I can toggle numlock and scrolllock on and off. (Which doesn't work when X completely freezes) I can't replicate this behavior on demand, it seems to occur more or less randomly.

Software that allows mac users to post comments to multiple myspace friends

sorry if i'm posting this in the wrong category, but it seemed like the most related one i could find. is there any software available that will allow myspace users to post comments to all their friends at one time? i know these programs exist for pc's, but i haven't found one yet for macs. i manage a page for a group i'm in, and this software would be really helpful. please note - i'm not interested in using the myspace blog feature, bulletins or anything else to pass along the information we need to post. i want to be able to use the comment feature, but i don't want to have to do each one individually as myspace currently demands. thanks so much for your help and time!

You could do a google search. You could search at versiontracker.com

In ALV Report ,a field to allow the user EDIT/CHANGE

Hi Guys,
My requirement is
in the ALV Grid display iam having 10 fields.5th field should be allow the user EDIT/CHANGE mode.
what ever he enters the value the same should be updated to an custom table.
EX.
o/p:
0001 0002 0003 0004 0005 0006 0007 0008 0009 0010
Now the user changed the value 0005 to 0011.
0001 0002 0003 0004 0011 0006 0007 0008 0009 0010
now 0011 should be updated in custom table.
to do this process please suggest a best way for coding.
thanks in advance.
Sunil.

hi
*& Report ZTESTDEMO_INTERACTIVE_LIST_2
REPORT ZTESTDEMO_INTERACTIVE_LIST_2.
TABLES: MARA,MARC,MARD.
* internal table itab_mara 3 fields matnr, ernam,mtart
DATA: BEGIN OF ITAB_MARA OCCURS 0,
MATNR LIKE MARA-MATNR, " material number
ERNAM LIKE MARA-ERNAM, " name of person who create
MTART LIKE MARA-MTART, " Material Type
END OF ITAB_MARA.
* internal table itab_marc 3 fields matnr, werks,lvorm
DATA: BEGIN OF ITAB_MARC OCCURS 0,
MATNR LIKE MARC-MATNR,
WERKS LIKE MARC-WERKS, " Plant
LVORM LIKE MARC-LVORM, " Flag Material for Deletion at Plant Level
END OF ITAB_MARC.
* internal table itab_mard 2 fields
DATA: BEGIN OF ITAB_MARD OCCURS 0,
MATNR LIKE MARD-MATNR,
LGORT LIKE MARD-LGORT, " Storage Location
END OF ITAB_MARD.
SELECT-OPTIONS: S_MTART FOR MARA-MTART.
INITIALIZATION.
S_MTART-LOW = 'HALB'.
S_MTART-HIGH = 'HAWA'.
S_MTART-OPTION = 'BT'.
APPEND S_MTART.
START-OF-SELECTION.
SELECT MATNR ERNAM MTART FROM MARA INTO TABLE ITAB_MARA WHERE MTART IN
S_MTART.
PERFORM DISPLAY.
TOP-OF-PAGE.
WRITE:/2(15) 'MATERIAL NO',20(20) 'CREATED BY',45(15) 'MATERIAL TYPE'.
FORM DISPLAY.
LOOP AT ITAB_MARA.
WRITE:/ ITAB_MARA-MATNR UNDER 'MATERIAL NO' HOTSPOT ON,ITAB_MARA-ERNAM
UNDER 'CREATED BY',ITAB_MARA-MTART UNDER 'MATERIAL TYPE'.
HIDE: ITAB_MARA-MATNR.
ENDLOOP.
ENDFORM.
AT LINE-SELECTION.
CASE SY-LSIND.
WHEN 1.
SELECT MATNR WERKS LVORM FROM MARC INTO TABLE ITAB_MARC WHERE MATNR =
ITAB_MARA-MATNR.
PERFORM DISPLAY1.
WHEN 2.
SELECT MATNR LGORT FROM MARD INTO TABLE ITAB_MARD WHERE MATNR =
ITAB_MARC-MATNR.
PERFORM DISPLAY2.
when 3.
sy-lsind = 0.
ENDCASE.
FORM DISPLAY1.
LOOP AT ITAB_MARC.
WRITE:/ ITAB_MARC-MATNR HOTSPOT ON, ITAB_MARC-WERKS,ITAB_MARC-LVORM.
HIDE: ITAB_MARC-MATNR.
ENDLOOP.
WRITE:/ SY-LSIND.
ENDFORM.
FORM DISPLAY2.
LOOP AT ITAB_MARD.
WRITE:/ ITAB_MARD-MATNR, ITAB_MARD-LGORT.
ENDLOOP.
WRITE:/ SY-LSIND.
ENDFORM.
regards
ravish
<b>plz dont forget to reward points if helpful</b>

How to allow multiple users login to a MAC PRO without interruption?

I have a mac pro, which runs Yosemite, (2013 module) to be used as a server. However, I have difficult to let multiple users to use the mac simultaneously.
Objective:
    One person uses the mac directly on his desktop, while the others to login remotely though VNC from PC (win 7/Linux).
    The users have their own workspace, and they will not interrupt each other.
What I tried:
    I created two mange accounts on the MAC.
    Account 1 was used to directly login on the mac desktop.
    Account 2 was used to login to the mac from a PC though VNC. (I also tried this from a Centos workstation with the Tiger VNC viewer)
Problem:
When account 2 is login, the location monitor will automatically change to that account as well. Both accounts shared exactly the same screen, mouse & keyboard actions. It is impossible to let multiple users to use the MAC pro simultaneously without interruptions.
If I use "hdiutil attach" to mount a dmg file though SSH with account 2, the folder will automatically show in the local desktop login with account 1.
Question:
I read something about the "Per-user screen sharing". It says, "You can remotely log into a Mac with any user account on that computer and control it, without interrupting someone else who might be using the computer under a different login." Is it possible to do this from a PC or Linux client?
If the problem is simply due to the poor functionality of the build-in VNC service in Yosemite, I appreciate your help to suggest some other decent VNC server for Yosemite. I know the Vine Server (OSXvnc), but I failed to install it on the mac because it is incompatible with the Yosemite.
Does the SSH is supposed to work in this way in OSX? I mean the local account can see the folder mounted by another account though SSH.
If any specific version of Yosemite is required to allow multiple users to access a mac simultaneously? Just as the win 7 professional allow only one user to login in at each time. But with the remote desktop server of windows, multiple users are able to use the same computer at the same time without any problem.
If you familiar with any of the above questions, please help. Any comments and suggestions are appreciated.
I know the best way to get the solution is to direct call the apple support. However, it is really not easy to call them. Because it always results with long waiting time and then the people pick up the phone will transfer my call to an expert who will make me to describe the problem again.
Since I'm not interested in the technique details of all the problems, it is also grateful if you would provide a direct instruction to let me setup the computer for the purpose.
Thanks you very much for your kindly help.

I cannot help with the screen sharing, although I have just tried it with a RealVNC client on an iPad and it seemed to work OK.
However on the disk showing on all users desk tops have you unchecked the "ignore ownership on this volume" check box? You can check the drives permissions with CMD i command.

I am trying to allow guests on windows to connect to shares on my Lion server but it keeps asking for a password for guest. I have allow guest users to access this share enabled but it still does not work.

I am trying to allow guests on windows to connect to shares on my Lion server but it keeps asking for a password for guest. I have allow guest users to access this share enabled but it still does not work.

Ditto. Guest accounts shouldn't have a password. No way to enter one in System Prefs...

Hi All,i am currently working on a flex application that will allow the user to change the language

Hi All,i am currently working on a flex application that will allow the user to change the language within the application from english to Japanese and vice versa. And everything works fine.
I am using flex 4.5
We allow the user to save records with english or japanese texts.
problem
When the user manually enters Japanese text and tries to save it the record defaults back to the default name (which is in english). But if you copy the entered text and paste it and then save it.It works fine.
Any idea , why this is happening?
Please let me know if the question is not clear.
Looks like there was already a bug
https://issues.apache.org/jira/browse/FLEX-28894?page=com.atlassian.jira.plugin.system.iss uetabpanels:all-tabpanel
Not sure why does it say , Resolved .
-KB
Message was edited by: bKartik.b

By Payal integration , you mean paypal button html ? or payment gateway setup etc ? If its a gateway configuration for your site domain then single page for all layout will work , but if you are using button code for all renditions then you would need to create separate pages for all.
Thanks,
Sanjit

Allow the user to control the width of the edit forum post input box

I would like to control the width of of the edit-forum post input box. This could be:
automatically adjust the width of the box so that the box doesn't run off the right edge of the window.
have a user global preference to set the preferred width
at least, allow the user to change the width via the change size icon. The three horizontal bars at the lower left of the input box. You can adjust the vertical dimension, but not the horizontal. TenFourFox 4.0.1. This is probably being blocked for some obscure reason.
Here is an example of an over extended right margin:
Curiously enough, the "software" let's me adjust the width & height of the add reason to edit text, but not adjust the width of the more important edit text box.
Robert

Testing
Standard Reply box can be height adjusted but not width.
Same with Advanced Editor
No Adjustment at all in HTL Editor
Edit.
The Edit uses the Advanced Editor
Only Height Adjustment again.
I do seem to remember someone posting about the width and saying they could drag it over the edge of the right hand edge (Into the grey surround)
This may have been a post in the lounge.
It didn't actually try it at the time but have played with it since and have not seen it.
Maybe it is something they "Fixed" in both senses of the word.
Second edit.
I can't alter the box that currently reads "Message Edited by:- ..."
I also can't get this box to accept New lines (they appear in the box but don't post that way)
Corrected Spelling
9:51 PM Wednesday; May 11, 2011
Please, if posting Logs, do not post any Log info after the line "Binary Images for iChat"
 G4/1GhzDual MDD (Leopard 10.5.8)
 MacBookPro 2Gb( 10.6.7)
 Mac OS X (10.6.7),
"Limit the Logs to the Bits above Binary Images."  No, Seriously
Message was edited by: Ralph Johns (UK)
Message was edited by: Ralph Johns (UK)
and new line with a line space as well

Allow the user to add multiple email addresses in Email ID Field

In my jsp page, the funtionality i need to enhance is to allow the user to enter multiple email addresses in the "To" field of my Email A friend Task...right now it allows only one email id to be input by the user
Can anyone suggest me how to achieve it using javascript /jstl
Thanks in Advance

one more alternative is u can use : StringTokenizer class.
Code as follows: I hope this also helps u. But it will be used at server side. not at client side(for client side validations , we are using javascript).
java.util.StringTokenizer stringTokenizer=new java.util.StringTokenizer(request.getParameter("to"),",");
          String[] list=new String[stringTokenizer.countTokens()+1];
          int i=0;
          while(stringTokenizer.hasMoreTokens()){
               list=stringTokenizer.nextToken();
               i++;
Regards

Way to allow the user access to the saved lists of this Z report

We have a Z report that we want to run at midnight each Sunday and then view the output/layout first thing Monday morning. We can schedule the report to run but it appears that the only way we can save the output as a 'file' for later viewing is by using the "Save with ID" option, which puts the output into a SAP 'saved list'.
The problem with this is that it doesn't appear to be possible to access that list from the Z-report - it would appear that you have to go into SQ01 and use the 'saved list' button. This means giving the Z- report user access to SQ01 as well as Z-report, which, for security (SOD) reasons we don't want to do.
We can run the report in foreground with the output option "File store" and save the output as a file to a specified location,. But this option doesn't appear to be available when the report is scheduled as a background job. If this is done, the background job runs but there's no output anywhere, as far as we can tell.
So what want is to run the report in background but with the output option 'File store' or equivalent (i.e. an output stored somewhere that the report user can view). Is this not possible, or have we missed something in setting up the report run?
Or is there a way to allow the user access to the saved lists of this Z report without giving them T-code SQ01?
Thanks

Hi !
I just wonder if the answer from Varishtb below did solve your propblem.
I have exactly the same problem as you. I also want to be able to look at the saved list without using the sq01.
If you solved it I will be grateful to get the solution.
regards Lars
answer:
You can call the infoset query directly from a transaction code. There's
no need to copy it as a 'Z-report' (or as a custom report). In fact,
everytime you're copying an infoset query to a report, you're calling
for problems the next time you face an upgrade. (That is because SAP
changes the internal logic used to handle the infosets queries from
version to version)
We're using some infoset queries and they work fine this way.

Display some constant in the input field and allow the user to change it.

Dear All,
I have a requirement in WDA to display inputfield with some constant initially and allow
the user to change that value according to his wish.Currently I am using UI Element
InputField for this,but I am not able to show the constant initially.
How can I achieve this pls suggest.
Thanks,
Reddy.

Hi sudhir,
To display with default values, you need to write your code in wddointi method.
Check this code..
* navigate from <CONTEXT> to <INPUT> via lead selection
lo_nd_input = wd_context->get_child_node( name = wd_this->wdctx_input ).
* get element via lead selection
lo_el_input = lo_nd_input->get_element( ).
lv_ship_point = '1001'.
* set single attribute
lo_el_input->set_attribute(
name = `SHIP_POINT`
value = lv_ship_point ). // Now ship_point have initial value 1001.
Cheers,
Kris.

Allow an user to manage certain users

Similar Messages

Maybe you are looking for