ALSA often doesn't produce sound anymore after suspend

Hi,
For some years this has been fine and pulseaudio worked fine after waking up from suspend.
But for about one or two month it more and more often doesn't. After waking up from suspend I just don't hear sound anymore. I can't find any error message anywhere, just that it doesn't output sound anymore. Killing it with "pulseaudio -k" or "pkill pulseaudio" or "pkill -9 pulseaudio" doesn't solve it. But "telinit 1", waiting until pulseaudio is dead and then "telinit 5" solves it so it is definitely not my sound driver.
00:1b.0 Audio device: Intel Corporation 5 Series/3400 Series Chipset High Definition Audio (rev 05)
Any ideas how I can find out what's wrong?
Last edited by Cdh (2012-05-10 19:48:45)

Maybe the power saving for my sound chip triggered the problem. I had this in my startup config:
echo 1 > /sys/module/snd_hda_intel/parameters/power_save
I have removed it and hadn't had that problem so far. If it doesn't happen in the next time I'll mark this as solved. :-/
EDIT:
Nope, it didn't help. Today after waking up from suspend it didn't output any sound although everything seemed fine.
This time I tried transferring the sound over the network with pulseaudio. That worked.
Then I killed everything and even went to init 1. But there not even mplayer -ao alsa worked and I had to reboot to get my sound back. So, not pulseaudio's fault, but alsa doesn't work right.
Linux chrisl 3.4.0-1-mainline #1 SMP PREEMPT Mon May 7 11:06:02 UTC 2012 x86_64 Intel(R) Core(TM) i5 CPU M 480 @ 2.67GHz GenuineIntel GNU/Linux
Last edited by Cdh (2012-05-10 19:51:19)

Similar Messages

HT4623 I have just finished the upgradation to an iOS 6.1.3 and have lost sound in Music and Videos. I am using an iPhone 4S. My iPhone doesn't produce sound when playing Youtube or local camera videos. However ringtones and notifications sound works fine

I have just finished the upgradation to an iOS 6.1.3 and have lost sound in Music and Videos. I am using an iPhone 4S. My iPhone doesn't produce sound when playing Youtube or local camera videos. However ringtones and notifications sound works fine.It is quite strange as well. Have you encountered this issue before?If yes then what's the solution?

I had major issues with the iPhone 4s battery, however it’s resolved.
The tech who set the phone up at the Apple store did so with little training.
if you have a mobile me account. First go and move all your data to the cloud by going on your computer and logging in at me.com/move. The cloud has replaced mobile me, so there is no need for those two accounts
Also make sure that for any of your email accounts you set them up to fetch, not push. My tech person set them all to have the email servers push data to the phone. The new iphone4s antenna is extremely strong so it will continually try to access stuff that is pushed–***** a lot of battery life doing this. It makes it worse if you have exchange 2010 accounts. Something about changes made to exchange really suck battery life from devices that access such accounts.
turning of locator and the push notifications from facebook--they have a lot!

Wine doesn't start utorrent anymore after latest update [SOLVED]

Like the subject says, wine doesn't start utorrent anymore after latest update. The output I get is the following:
$ wine /mnt/data/utorrent/utorrent-1.6.1-beta-build-478.exe
fixme:vxd:VXD_Open Unknown/unsupported VxD L"sice.vxd". Try setting Windows version to 'nt40' or 'win31'.
fixme:vxd:VXD_Open Unknown/unsupported VxD L"ntice.vxd". Try setting Windows version to 'nt40' or 'win31'.
err:imagelist:ImageList_LoadImageW Error loading image!
err:imagelist:ImageList_LoadImageW Error loading image!
err:imagelist:ImageList_LoadImageW Error loading image!
fixme:listview:LISTVIEW_SetColumnOrderArray iCount 16 lpiArray 0x33e7b8
fixme:keyboard:UnregisterHotKey (0x30024,1): stub
and then it hangs. If I change my Windows version in winecfg to for instance Windows XP, the first 2 errors disappear, but wine still hangs:
$ wine /mnt/data/utorrent/utorrent-1.6.1-beta-build-478.exe
err:imagelist:ImageList_LoadImageW Error loading image!
err:imagelist:ImageList_LoadImageW Error loading image!
err:imagelist:ImageList_LoadImageW Error loading image!
fixme:listview:LISTVIEW_SetColumnOrderArray iCount 16 lpiArray 0x33edf8
fixme:keyboard:UnregisterHotKey (0x30026,1): stub
The vm.legacy_va_layout sysctl is not enabled:
# sysctl vm.legacy_va_layout
vm.legacy_va_layout = 0
Does anybody have an idea to what might be going on?
Enabling DRI and disabling DRI doesn't help. Updating to the latest wine 0.9.30-1 also didn't change anything.
Last edited by tunkaflux (2007-01-31 12:45:44)

Problem is solved. Had to delete the .wine folder. Lost all utorrent settings, but it works again now.

GDM doesn't show up anymore after installing catalyst, Xorg works fine

Hi,
I just installed catalyst-hook from Vi0L0 and my situation is this: when I boot my computer the output on the tty1 gets stucked after the checking the filesystem with systemd-fsck and nothing appears after that, no blinking cursor, no prompt that asks me for a login, no nothing, nothing progress in both textual and graphic modes ; however, if I switch to the 2nd terminal with ALT + F2 I can login and start Xorg via the usual
startx
and apparently no session is ever being initiated before that so whatever is happening on tty1 must prevent xorg from even starting a new session.
What I tried
The main problem is that I have absolutely no idea what this is about, It could be anything ranging from modprobe to gdm, but since I have an audio card that only works properly when the appropriate configuration in
/etc/modprobe.d/modprobe.conf
gets loaded and I can even start a desktop session, I'm assuming that the core stuff on my system ( kernel modules and Xorg ) is working properly .
[ Test 1 ]
aticonfig --acpi-services=off
doesn't fix anything and doesn't make a difference at all
[ Test 2 ]
/etc/gdm/custom.conf
# GDM configuration storage
[daemon]
AlwaysRestartServer=true
[security]
[xdmcp]
[greeter]
[chooser]
[debug]
Apparently this should fix the same problem experienced by KDM users; as far as I can tell this changes nothing .
Bottom line
I can't get to the GDM login anymore after installing catalyst-hook, I can use the fglrx without any major issue, I can start a desktop session with startx from tty2 and tty1 gets stuck before anything "graphical" can actually appear on the screen and probably non even Xorg gets any chance of running on tty1 .
What kind of problem is this ?

arkur wrote:
clfarron4 wrote:
Have you seen the catalyst-fix-gdm or the AUR package?
What happens with another different DM?
Also I can't find that package with pacman, I also would like to fix this by myself, not because I don't trust the author of the package, but I just don't want to install too many packages and for the core things I would like full access to the essential configuration .
Anyway it looks like that GDM is the problem this round.
You won't find it with pacman, because it is in the AUR and you will to compile it to install it.

[SOLVED] No sound anymore after latest upgrade

Hello,
i did the following upgrade
[2014-01-25 16:06] [PACMAN] starting full system upgrade
[2014-01-25 17:38] [ALPM-SCRIPTLET] ==> Füge Schlüssel aus archlinux.gpg hinzu ...
[2014-01-25 17:38] [ALPM-SCRIPTLET] gpg: 3 marginal-needed, 1 complete-needed, PGP Vertrauensmodell
[2014-01-25 17:38] [ALPM-SCRIPTLET] gpg: Tiefe: 0 gültig: 1 signiert: 5 Vertrauen: 0-, 0q, 0n, 0m, 0f, 1u
[2014-01-25 17:38] [ALPM-SCRIPTLET] gpg: Tiefe: 1 gültig: 5 signiert: 59 Vertrauen: 0-, 0q, 0n, 5m, 0f, 0u
[2014-01-25 17:38] [ALPM-SCRIPTLET] gpg: Tiefe: 2 gültig: 59 signiert: 4 Vertrauen: 59-, 0q, 0n, 0m, 0f, 0u
[2014-01-25 17:38] [ALPM-SCRIPTLET] gpg: nächste "Trust-DB"-Pflichtüberprüfung am 2016-01-22
[2014-01-25 17:38] [ALPM-SCRIPTLET] ==> Signiere die vertrauenswürdigen Schlüssel im Schlüsselbund lokal ...
[2014-01-25 17:38] [ALPM-SCRIPTLET] -> Signiere Schlüssel 0E8B644079F599DFC1DDC3973348882F6AC6A4C2 lokal ...
[2014-01-25 17:38] [ALPM-SCRIPTLET] -> Signiere Schlüssel 684148BB25B49E986A4944C55184252D824B18E8 lokal ...
[2014-01-25 17:38] [ALPM-SCRIPTLET] -> Signiere Schlüssel 44D4A033AC140143927397D47EFD567D4C7EA887 lokal ...
[2014-01-25 17:38] [ALPM-SCRIPTLET] -> Signiere Schlüssel 27FFC4769E19F096D41D9265A04F9397CDFD6BB0 lokal ...
[2014-01-25 17:38] [ALPM-SCRIPTLET] -> Signiere Schlüssel AB19265E5D7D20687D303246BA1DFB64FFF979E7 lokal ...
[2014-01-25 17:38] [ALPM-SCRIPTLET] ==> Importiere die Vertrauenswerte des Benutzers ...
[2014-01-25 17:38] [ALPM-SCRIPTLET] ==> Mache widerrufene Schlüssel im Schlüsselbund unbrauchbar ...
[2014-01-25 17:38] [ALPM-SCRIPTLET] -> Mache Schlüssel F5A361A3A13554B85E57DDDAAF7EF7873CFD4BB6 unbrauchbar ...
[2014-01-25 17:38] [ALPM-SCRIPTLET] -> Mache Schlüssel 7FA647CD89891DEDC060287BB9113D1ED21E1A55 unbrauchbar ...
[2014-01-25 17:38] [ALPM-SCRIPTLET] -> Mache Schlüssel BC1FBE4D2826A0B51E47ED62E2539214C6C11350 unbrauchbar ...
[2014-01-25 17:38] [ALPM-SCRIPTLET] -> Mache Schlüssel 4A8B17E20B88ACA61860009B5CED81B7C2E5C0D2 unbrauchbar ...
[2014-01-25 17:38] [ALPM-SCRIPTLET] -> Mache Schlüssel 63F395DE2D6398BBE458F281F2DBB4931985A992 unbrauchbar ...
[2014-01-25 17:38] [ALPM-SCRIPTLET] -> Mache Schlüssel 0B20CA1931F5DA3A70D0F8D2EA6836E1AB441196 unbrauchbar ...
[2014-01-25 17:38] [ALPM-SCRIPTLET] -> Mache Schlüssel 8F76BEEA0289F9E1D3E229C05F946DED983D4366 unbrauchbar ...
[2014-01-25 17:38] [ALPM-SCRIPTLET] -> Mache Schlüssel 66BD74A036D522F51DD70A3C7F2A16726521E06D unbrauchbar ...
[2014-01-25 17:38] [ALPM-SCRIPTLET] -> Mache Schlüssel 81D7F8241DB38BC759C80FCE3A726C6170E80477 unbrauchbar ...
[2014-01-25 17:38] [ALPM-SCRIPTLET] -> Mache Schlüssel E7210A59715F6940CF9A4E36A001876699AD6E84 unbrauchbar ...
[2014-01-25 17:38] [ALPM-SCRIPTLET] ==> Aktualisiere Trust-Datenbank ...
[2014-01-25 17:38] [ALPM-SCRIPTLET] gpg: nächste "Trust-DB"-Pflichtüberprüfung am 2016-01-22
[2014-01-25 17:38] [PACMAN] upgraded archlinux-keyring (20140108-1 -> 20140124-1)
[2014-01-25 17:38] [PACMAN] upgraded libdrm (2.4.51-1 -> 2.4.52-1)
[2014-01-25 17:38] [PACMAN] upgraded wayland (1.3.0-1 -> 1.4.0-1)
[2014-01-25 17:38] [PACMAN] upgraded libdbus (1.6.18-3 -> 1.8.0-1)
[2014-01-25 17:38] [PACMAN] upgraded dbus (1.6.18-3 -> 1.8.0-1)
[2014-01-25 17:38] [PACMAN] upgraded libgcrypt (1.5.3-1 -> 1.6.0-2)
[2014-01-25 17:38] [PACMAN] upgraded systemd (208-3 -> 208-10)
[2014-01-25 17:38] [PACMAN] upgraded llvm-libs (3.3-1 -> 3.4-1)
[2014-01-25 17:38] [PACMAN] upgraded mesa (10.0.1-2 -> 10.0.2-1)
[2014-01-25 17:38] [PACMAN] upgraded mesa-libgl (10.0.1-2 -> 10.0.2-1)
[2014-01-25 17:38] [PACMAN] upgraded ati-dri (10.0.1-2 -> 10.0.2-1)
[2014-01-25 17:38] [PACMAN] upgraded bluez (5.13-1 -> 5.14-1)
[2014-01-25 17:38] [PACMAN] upgraded xdg-utils (1.1.0.git20130520-1 -> 1.1.0.git20140109-1)
[2014-01-25 17:38] [PACMAN] upgraded chromium (31.0.1650.63-1 -> 32.0.1700.77-1)
[2014-01-25 17:38] [PACMAN] upgraded gdk-pixbuf2 (2.30.2-1 -> 2.30.3-1)
[2014-01-25 17:38] [PACMAN] upgraded cogl (1.16.0-3 -> 1.16.2-1)
[2014-01-25 17:38] [PACMAN] upgraded clutter (1.16.2-1 -> 1.16.4-1)
[2014-01-25 17:38] [PACMAN] upgraded device-mapper (2.02.104-1 -> 2.02.105-1)
[2014-01-25 17:38] [PACMAN] upgraded cryptsetup (1.6.3-1 -> 1.6.3-2)
[2014-01-25 17:38] [PACMAN] upgraded curl (7.34.0-2 -> 7.34.0-3)
[2014-01-25 17:38] [PACMAN] upgraded cython (0.19.2-1 -> 0.20-1)
[2014-01-25 17:38] [PACMAN] upgraded pth (2.0.7-4 -> 2.0.7-5)
[2014-01-25 17:38] [PACMAN] upgraded dirmngr (1.1.1-1 -> 1.1.1-2)
[2014-01-25 17:38] [PACMAN] upgraded gnutls (3.2.8-1 -> 3.2.9-1)
[2014-01-25 17:38] [PACMAN] upgraded libvorbis (1.3.3-1 -> 1.3.4-1)
[2014-01-25 17:38] [PACMAN] upgraded ffmpeg (1:2.1.1-3 -> 1:2.1.3-1)
[2014-01-25 17:38] [PACMAN] upgraded gcr (3.10.1-1 -> 3.10.1-2)
[2014-01-25 17:38] [PACMAN] upgraded gdbm (1.10-3 -> 1.11-1)
[2014-01-25 17:38] [PACMAN] upgraded gedit (3.10.3-1 -> 3.10.4-1)
[2014-01-25 17:38] [PACMAN] upgraded gettext (0.18.3.1-2 -> 0.18.3.2-1)
[2014-01-25 17:38] [PACMAN] upgraded libcups (1.7.0-2 -> 1.7.1-3)
[2014-01-25 17:38] [PACMAN] installed libpaper (1.1.24-7)
[2014-01-25 17:38] [PACMAN] upgraded ghostscript (9.10-1 -> 9.10-3)
[2014-01-25 17:38] [PACMAN] upgraded glamor-egl (0.5.1-1 -> 0.5.1.r258-1)
[2014-01-25 17:38] [PACMAN] upgraded gnome-chess (3.10.2-2 -> 3.10.3-1)
[2014-01-25 17:38] [PACMAN] upgraded gnome-desktop (1:3.10.1-2 -> 1:3.10.2-1)
[2014-01-25 17:38] [PACMAN] upgraded gnome-keyring (3.10.1-1 -> 3.10.1-2)
[2014-01-25 17:38] [PACMAN] upgraded gnome-online-miners (3.10.2-1 -> 3.10.3-1)
[2014-01-25 17:38] [PACMAN] upgraded libsecret (0.16-1 -> 0.16-2)
[2014-01-25 17:38] [PACMAN] upgraded mutter (3.10.2-2 -> 3.10.3-1)
[2014-01-25 17:38] [PACMAN] upgraded gnome-shell (3.10.2.1-4 -> 3.10.3-1)
[2014-01-25 17:38] [PACMAN] upgraded gnupg (2.0.22-1 -> 2.0.22-2)
[2014-01-25 17:38] [PACMAN] upgraded grilo-plugins (0.2.9-2 -> 0.2.9-3)
[2014-01-25 17:38] [PACMAN] upgraded gstreamer0.10-ugly (0.10.19-8 -> 0.10.19-9)
[2014-01-25 17:38] [PACMAN] upgraded libcdio (0.90-2 -> 0.92-1)
[2014-01-25 17:38] [PACMAN] upgraded gstreamer0.10-ugly-plugins (0.10.19-8 -> 0.10.19-9)
[2014-01-25 17:38] [PACMAN] upgraded gtk-vnc (0.5.3-1 -> 0.5.3-3)
[2014-01-25 17:38] [PACMAN] upgraded libcdio-paranoia (10.2+0.90+1-1 -> 10.2+0.90+1-2)
[2014-01-25 17:38] [PACMAN] upgraded gvfs (1.18.3-1 -> 1.18.3-3)
[2014-01-25 17:38] [PACMAN] upgraded python-dbus-common (1.2.0-1 -> 1.2.0-2)
[2014-01-25 17:38] [PACMAN] upgraded python2-dbus (1.2.0-1 -> 1.2.0-2)
[2014-01-25 17:38] [PACMAN] upgraded libibus (1.5.4-3 -> 1.5.5-1)
[2014-01-25 17:38] [PACMAN] upgraded ibus (1.5.4-3 -> 1.5.5-1)
[2014-01-25 17:38] [PACMAN] upgraded inetutils (1.9.1.341-2 -> 1.9.2-1)
[2014-01-25 17:38] [PACMAN] upgraded iptables (1.4.20-1 -> 1.4.21-1)
[2014-01-25 17:38] [PACMAN] upgraded iproute2 (3.11.0-1 -> 3.12.0-1)
[2014-01-25 17:38] [PACMAN] upgraded isl (0.12.1-2 -> 0.12.2-1)
[2014-01-25 17:38] [PACMAN] upgraded jack (0.121.3-7 -> 0.124.1-1)
[2014-01-25 17:38] [PACMAN] upgraded lib32-dbus (1.6.18-1 -> 1.8.0-1)
[2014-01-25 17:38] [PACMAN] upgraded lib32-gettext (0.18.3.1-1 -> 0.18.3.2-1)
[2014-01-25 17:38] [PACMAN] upgraded lib32-libcap (2.22-2 -> 2.24-1)
[2014-01-25 17:38] [PACMAN] upgraded lib32-libdrm (2.4.51-1 -> 2.4.52-1)
[2014-01-25 17:38] [PACMAN] upgraded lib32-libgcrypt (1.5.3-1 -> 1.6.0-1)
[2014-01-25 17:38] [PACMAN] upgraded lib32-llvm-libs (3.3-1 -> 3.4-1)
[2014-01-25 17:38] [PACMAN] upgraded lib32-systemd (208-1 -> 208-2)
[2014-01-25 17:38] [PACMAN] upgraded lib32-mesa (10.0.1-1 -> 10.0.2-1)
[2014-01-25 17:38] [PACMAN] upgraded lib32-mesa-libgl (10.0.1-1 -> 10.0.2-1)
[2014-01-25 17:38] [PACMAN] upgraded libxslt (1.1.28-2 -> 1.1.28-3)
[2014-01-25 17:38] [PACMAN] upgraded libgda (5.2.1-1 -> 5.2.1-2)
[2014-01-25 17:38] [PACMAN] upgraded libgnome-keyring (3.10.1-1 -> 3.10.1-2)
[2014-01-25 17:38] [PACMAN] upgraded libraw (0.15.4-3 -> 0.16.0-1)
[2014-01-25 17:38] [PACMAN] upgraded rasqal (1:0.9.30-3 -> 1:0.9.30-4)
[2014-01-25 17:38] [PACMAN] upgraded redland (1:1.0.16-2 -> 1:1.0.17-1)
[2014-01-25 17:38] [PACMAN] upgraded libreoffice-common (4.1.4-1 -> 4.1.4-3)
[2014-01-25 17:38] [PACMAN] upgraded libreoffice-base (4.1.4-1 -> 4.1.4-3)
[2014-01-25 17:38] [PACMAN] upgraded libreoffice-calc (4.1.4-1 -> 4.1.4-3)
[2014-01-25 17:38] [PACMAN] upgraded libreoffice-draw (4.1.4-1 -> 4.1.4-3)
[2014-01-25 17:38] [PACMAN] upgraded libreoffice-gnome (4.1.4-1 -> 4.1.4-3)
[2014-01-25 17:38] [PACMAN] upgraded libreoffice-impress (4.1.4-1 -> 4.1.4-3)
[2014-01-25 17:38] [PACMAN] upgraded libreoffice-math (4.1.4-1 -> 4.1.4-3)
[2014-01-25 17:38] [PACMAN] upgraded libreoffice-writer (4.1.4-1 -> 4.1.4-3)
[2014-01-25 17:38] [PACMAN] upgraded libwbclient (4.1.3-1 -> 4.1.4-1)
[2014-01-25 17:38] [PACMAN] upgraded linux-firmware (20131013.7d0c7a8-1 -> 20140123.418320b-1)
[2014-01-25 17:38] [ALPM-SCRIPTLET] >>> Updating module dependencies. Please wait ...
[2014-01-25 17:38] [ALPM-SCRIPTLET] >>> Generating initial ramdisk, using mkinitcpio. Please wait...
[2014-01-25 17:38] [ALPM-SCRIPTLET] ==> Building image from preset: /etc/mkinitcpio.d/linux.preset: 'default'
[2014-01-25 17:38] [ALPM-SCRIPTLET] -> -k /boot/vmlinuz-linux -c /etc/mkinitcpio.conf -g /boot/initramfs-linux.img
[2014-01-25 17:38] [ALPM-SCRIPTLET] ==> Starting build: 3.12.8-1-ARCH
[2014-01-25 17:38] [ALPM-SCRIPTLET] -> Running build hook: [base]
[2014-01-25 17:38] [ALPM-SCRIPTLET] -> Running build hook: [udev]
[2014-01-25 17:38] [ALPM-SCRIPTLET] -> Running build hook: [autodetect]
[2014-01-25 17:38] [ALPM-SCRIPTLET] -> Running build hook: [modconf]
[2014-01-25 17:38] [ALPM-SCRIPTLET] -> Running build hook: [block]
[2014-01-25 17:38] [ALPM-SCRIPTLET] -> Running build hook: [filesystems]
[2014-01-25 17:38] [ALPM-SCRIPTLET] -> Running build hook: [keyboard]
[2014-01-25 17:38] [ALPM-SCRIPTLET] -> Running build hook: [fsck]
[2014-01-25 17:38] [ALPM-SCRIPTLET] ==> Generating module dependencies
[2014-01-25 17:38] [ALPM-SCRIPTLET] ==> Creating gzip initcpio image: /boot/initramfs-linux.img
[2014-01-25 17:38] [ALPM-SCRIPTLET] ==> Image generation successful
[2014-01-25 17:38] [ALPM-SCRIPTLET] ==> Building image from preset: /etc/mkinitcpio.d/linux.preset: 'fallback'
[2014-01-25 17:38] [ALPM-SCRIPTLET] -> -k /boot/vmlinuz-linux -c /etc/mkinitcpio.conf -g /boot/initramfs-linux-fallback.img -S autodetect
[2014-01-25 17:38] [ALPM-SCRIPTLET] ==> Starting build: 3.12.8-1-ARCH
[2014-01-25 17:38] [ALPM-SCRIPTLET] -> Running build hook: [base]
[2014-01-25 17:38] [ALPM-SCRIPTLET] -> Running build hook: [udev]
[2014-01-25 17:38] [ALPM-SCRIPTLET] -> Running build hook: [modconf]
[2014-01-25 17:38] [ALPM-SCRIPTLET] -> Running build hook: [block]
[2014-01-25 17:38] [ALPM-SCRIPTLET] ==> WARNING: Possibly missing firmware for module: aic94xx
[2014-01-25 17:38] [ALPM-SCRIPTLET] ==> WARNING: Possibly missing firmware for module: smsmdtv
[2014-01-25 17:38] [ALPM-SCRIPTLET] -> Running build hook: [filesystems]
[2014-01-25 17:38] [ALPM-SCRIPTLET] -> Running build hook: [keyboard]
[2014-01-25 17:38] [ALPM-SCRIPTLET] -> Running build hook: [fsck]
[2014-01-25 17:38] [ALPM-SCRIPTLET] ==> Generating module dependencies
[2014-01-25 17:38] [ALPM-SCRIPTLET] ==> Creating gzip initcpio image: /boot/initramfs-linux-fallback.img
[2014-01-25 17:38] [ALPM-SCRIPTLET] ==> Image generation successful
[2014-01-25 17:38] [PACMAN] upgraded linux (3.12.7-1 -> 3.12.8-1)
[2014-01-25 17:38] [PACMAN] upgraded lvm2 (2.02.104-1 -> 2.02.105-1)
[2014-01-25 17:38] [PACMAN] upgraded man-pages (3.55-1 -> 3.56-1)
[2014-01-25 17:38] [PACMAN] upgraded pcre (8.34-1 -> 8.34-2)
[2014-01-25 17:38] [PACMAN] upgraded perl (5.18.1-1 -> 5.18.2-2)
[2014-01-25 17:38] [PACMAN] upgraded procps-ng (3.3.9-1 -> 3.3.9-2)
[2014-01-25 17:38] [PACMAN] upgraded python-dbus (1.2.0-1 -> 1.2.0-2)
[2014-01-25 17:38] [PACMAN] upgraded s-nail (14.5.1-1 -> 14.5.2-1)
[2014-01-25 17:39] [PACMAN] upgraded webkitgtk (2.2.3-1 -> 2.2.4-1)
[2014-01-25 17:39] [PACMAN] upgraded shotwell (0.15.1-1 -> 0.15.1-2)
[2014-01-25 17:39] [PACMAN] upgraded smbclient (4.1.3-1 -> 4.1.4-1)
[2014-01-25 17:39] [PACMAN] upgraded sudo (1.8.8-1 -> 1.8.9.p4-1)
[2014-01-25 17:39] [PACMAN] upgraded systemd-sysvcompat (208-3 -> 208-10)
[2014-01-25 17:39] [PACMAN] upgraded totem-plparser (3.10.0-3 -> 3.10.0-4)
[2014-01-25 17:39] [PACMAN] upgraded vino (3.10.1-1 -> 3.10.1-2)
[2014-01-25 17:39] [ALPM-SCRIPTLET] In order to use the new version, reload all virtualbox modules manually.
[2014-01-25 17:39] [PACMAN] upgraded virtualbox-host-modules (4.3.6-3 -> 4.3.6-4)
[2014-01-25 17:39] [PACMAN] upgraded virtualbox (4.3.6-2 -> 4.3.6-3)
[2014-01-25 17:39] [PACMAN] upgraded vlc (2.1.2-2 -> 2.1.2-3)
[2014-01-25 17:39] [PACMAN] upgraded wine (1.7.10-1 -> 1.7.11-1)
[2014-01-25 17:39] [PACMAN] upgraded xextproto (7.2.1-1 -> 7.3.0-1)
[2014-01-25 17:39] [PACMAN] upgraded xf86-input-evdev (2.8.2-1 -> 2.8.2-2)
[2014-01-25 17:39] [PACMAN] upgraded xf86-video-ati (1:7.2.0-1 -> 1:7.2.0-2)
[2014-01-25 17:39] [PACMAN] upgraded xorg-server-common (1.14.5-2 -> 1.15.0-5)
[2014-01-25 17:39] [PACMAN] installed libxshmfence (1.1-1)
[2014-01-25 17:39] [PACMAN] upgraded xorg-server (1.14.5-2 -> 1.15.0-5)
[2014-01-25 17:39] [PACMAN] upgraded yelp (3.10.1-1 -> 3.10.1-2)
[2014-01-25 17:39] [PACMAN] upgraded youtube-dl (2014.01.17.2-1 -> 2014.01.23.4-1)
And dont have any sound anymore, nowhere. PulseAudio is just ignoring my sound-card completely and KDE/GNOME System settings tell me that i do not even have any soundcard
Alsamixer detects the soundcard fine and if i unmute the soundcard there, it works. But its not really comfortable to change the volume with Alsamixer. Also i have no ability to change between HDMI and Analog.
Any idea what could have cause this? As you can see in the logs, there havent been any major kernel update nor pulseaudio update.
This is the Soundcard: Audio device: Advanced Micro Devices, Inc. [AMD/ATI] SBx00 Azalia (Intel HDA)
Kernel Module is snd_hda_intel which is loaded and working
Seems like Pulseaudio is not running at all, it also does not start with the message "E: [pulseaudio] core-util.c: Home directory not accessible: Permission denied" which is not true
Last edited by Vamp898 (2014-01-26 15:29:22)

Ok, found out it was true.
Seems like whatever reason i have to find out reset some files (not all) to root, so i was no longer the owner of some random files for whatever reason.
Works now.

No sound anymore after installing XP Home on Satellite Pro 4600

Hi gents,
I don't have any sound more after I have installed winxp home on my Pro 4600. I used the problem solve wizard but without any improvements. I have also installed the latest sound driver and bios.
Looking forward to some replies, .............Harry

He Eldorado,
You teached me a wise lesson "first look to the obvious things". And yes it was the volume controller at the side (did not know there was one). But anyway problem is solved
Thanks...........Harry

What do I do if my ipod doesn't produce sound

what do I do if my ipod doesn't produce sound

Have you tried using a different set of headphones? Otherwise, try a hard reset of the iPod followed by a restore of the iPod via iTunes if the reset doesn't work.
And if all else fails, it's likely that your iPod's headphone jack is damaged and is need of replacement.
B-rock

Playing music on my iPhone 4s doesn't produce sound except via headphone

My iPhone 4S produces no sound at all when playing music & videos except I use my headset. Please note I have restored my phone to factory setting which seemed to resolve the issue only for it to re-surface after a few days.
Please help.
NB: iPhone is less than 2 months old.

Hey Udodi,
Thanks for the question, and great troubleshooting. The following resource outlines the issue you are experiencing, and a potential resolution:
iPhone: No sound or distorted sound from speaker
http://support.apple.com/kb/ts5180
1. Verify that the volume is set to a level you would normally be able to hear.
2. Ensure that there is nothing plugged in to the headset jack or the dock connector.
3. If the iPhone is in a protective case, make sure that the speaker port isn't blocked by the case.
4. Make sure that the speaker and dock port aren't clogged with debris. If necessary, clean it with a clean, small, dry, soft-bristled brush. Carefully and gently brush away any debris.
5. If an audio issue occurs when using a specific application, try testing other applications to see if the issue persists.
6. If the iPhone is paired with a Bluetooth headset or car kit:
- Try turning off Bluetooth.
- If you experience difficulties with the Bluetooth feature, follow these troubleshooting steps.
7. Restart the iPhone.
8. If restarting doesn't fix the issue, ensure that your iPhone is updated to the latest version of iOS.
9. If the issue is not resolved after restoring the iPhone software, please contact Apple Support.
If the issue persists, please follow the last step by contacting Apple Support for support and service options.
Thanks,
Matt M.

I have an iPad 2 and external speakers work, but JACK for headset doesn't produce sound. If I wiggle, twist or adjust it, the earphones make a crackly and very low grade sound. Ideas?

No aud. or sound when using wired headphones. If I constantly play with input jack it will produce a low sound or a regular sound but it's not of any quality worth listening. I have owned this iPad for over three years. It was purchased new.
Happenings since 2013:
Broke screen due to fall on floor 9-2013
Screen replaced by techs on 10-2013
Upon getting back iPad after being repaired discovered no WiFi on 11-2013
Sent back to techs to repair issues with WiFi on 11-2013
Received unit back on 12-21-13. I only checked WiFi. Unit remained unused for a few weeks.
Used unit during Xmas season on average 12 hours a day but have not yet discovered or even tried a pair of headsets until after Xmas.
Does work on screen and internal wifi antenna effect output sound on headphones?
Can this be easily repaired, possibly without taking off the cover? Does it have an update conflict? Is is a Settings issue?
Please help with any ideas or suggestions.

Hello,
Try wiping the iPad and then starting again. (Don't forget to back up first!)
I had that problem it was software.

[solved] Pulseaudio doesn't detect sound card after system update

Before a recent system update I had pulseaudio working flawlessly, but after doing a recent system update with pacman -Syu,
pulseaudio no longer sees my sound card and only displays the Dummy audio device. Among the packages updated that I can
remember off the top of my head are the Linux keneral, udev, kmod, instead of trying to roll back my system I figured I would try
to fix the issue. The only thing suggested in the Pulseaudio wiki is that a asound.conf directory is overriding the /etc/asound.conf
file which is not the case on my system.
Looking at the output from lsmod I can see where the kernel modules for the sound card is getting loaded
snd_hda_intel 23375 0
snd_hda_codec 89160 3 snd_hda_intel,snd_hda_codec_realtek,snd_hda_codec_hdmi
snd_hwdep 6389 1 snd_hda_codec
snd_pcm 74780 3 snd_hda_codec,snd_hda_intel,snd_hda_codec_hdmi
snd_page_alloc 7153 2 snd_pcm,snd_hda_intel
snd_timer 19544 1 snd_pcm
and looking at the output from the ps command I can see that pulseaudio is getting started
1190 ? S<l 0:00 /usr/bin/pulseaudio --start
1195 ? S 0:00 \_ /usr/lib/pulse/gconf-helper
but pacmd list still reports this
0 card(s) available.
0 sink input(s) available.
0 source outputs(s) available.
0 cache entrie(s) available.
Here is the output of pacmd dump if it helps
### Configuration dump generated at Thu Feb 16 08:45:56 2012
load-module module-device-restore
load-module module-stream-restore
load-module module-card-restore
load-module module-augment-properties
load-module module-udev-detect tsched=0
load-module module-jackdbus-detect
load-module module-bluetooth-discover
load-module module-esound-protocol-unix
load-module module-native-protocol-unix
load-module module-gconf
load-module module-default-device-restore
load-module module-rescue-streams
load-module module-null-sink sink_name=auto_null sink_properties='device.description="Dummy Output"'
load-module module-always-sink
load-module module-intended-roles
load-module module-suspend-on-idle
load-module module-console-kit
load-module module-position-event-sounds
load-module module-cork-music-on-phone
load-module module-filter-heuristics
load-module module-filter-apply
load-module module-dbus-protocol
load-module module-x11-publish display=:0.0
load-module module-cli-protocol-unix
set-sink-volume auto_null 0x10000
set-sink-mute auto_null no
suspend-sink auto_null yes
set-source-volume auto_null.monitor 0x10000
set-source-mute auto_null.monitor no
suspend-source auto_null.monitor yes
set-default-sink auto_null
set-default-source auto_null.monitor
### EOF
EDIT: I should also add that fuser -v /dev/snd/* returns nothing and fuser -v /dev/dsp returns "Specified filename /dev/dsp does not exist".
Last edited by vendion (2012-03-02 23:26:28)

Digging into this further aplay -L gives different output based off of whether or not I ran is as my normal user or with sudo/as root.
As a user (which is how pulseaudio is also being ran):
> aplay -L
null
Discard all samples (playback) or generate zero samples (capture)
pulse
PulseAudio Sound Server
default
Default ALSA Output (currently PulseAudio Sound Server)
as root it does see both my sound cards when I run it with sudo or as root:
> sudo aplay -L
Password:
null
Discard all samples (playback) or generate zero samples (capture)
pulse
PulseAudio Sound Server
default
Default ALSA Output (currently PulseAudio Sound Server)
sysdefault:CARD=SB
HDA ATI SB, ALC887-VD Analog
Default Audio Device
front:CARD=SB,DEV=0
HDA ATI SB, ALC887-VD Analog
Front speakers
surround40:CARD=SB,DEV=0
HDA ATI SB, ALC887-VD Analog
4.0 Surround output to Front and Rear speakers
surround41:CARD=SB,DEV=0
HDA ATI SB, ALC887-VD Analog
4.1 Surround output to Front, Rear and Subwoofer speakers
surround50:CARD=SB,DEV=0
HDA ATI SB, ALC887-VD Analog
5.0 Surround output to Front, Center and Rear speakers
surround51:CARD=SB,DEV=0
HDA ATI SB, ALC887-VD Analog
5.1 Surround output to Front, Center, Rear and Subwoofer speakers
surround71:CARD=SB,DEV=0
HDA ATI SB, ALC887-VD Analog
7.1 Surround output to Front, Center, Side, Rear and Woofer speakers
iec958:CARD=SB,DEV=0
HDA ATI SB, ALC887-VD Digital
IEC958 (S/PDIF) Digital Audio Output
hdmi:CARD=HDMI,DEV=0
HDA ATI HDMI, HDMI 0
HDMI Audio Output
This behavior is confusing to me, and if someone knows what is going on and how to fix it I really want to get sound with pulseaudio working and have sound again.

Mail doesn't launch hidden anymore after Yosemite Upgrade

I have the Mail.app configured as a hidden startup item, so it would launch in the background, when I logged in to my system. Now, after upgrading to OS X Yosemite, the app launches visible, which is annoying. It is not the active app (the Finder is), but it's visible. I tried to remove it form the startup items and added it again, but it didn't help. All other apps launch hidden, I tried it with iTunes.app and it worked fine. Does anybody know a solution for this problem?

this is sort of complicated.
Mail was working on my MacBook #1.
I then was migrating stuff from MacBook #2 over to #1./
after that is when Mail quit.
but I thinkI tried to open Mail on #2 before I migrated, and it didn't work. and, it still doesn't work on #2.
Then I just put in the Everything Else disk (has finder, iChat and Mail) ... reloaded it on #1, and #1 still doesn't work.
I get the same message: Mail failed to launch.
drowning......here.

Most telefon companies doesn't produce a phone, after the order...

Apple must have produced hundreds of thousands iPhone 4, before release. Otherwise.... hrm not a smart company, Apple.
U can't produce iPhone's by the order. Cause it dosn't cost that much tpo produce.
What about if the television or computer producers do the same. Then we'll still be waiting for tyhat computer, that u ordered in the 90's, and your tv.... Still waiting.
I ordered on release date in Sweden July 30th, and haven't heard a thing since then. The telefoncompany that i ordered from, just tells me that Apple don't have Iphones to ship...
Shame...........

Sorry, apples magic production factories will magically make your iphone and magically ship it to you through the internet since its a series of tubes...
They have sold over 400k of these so far so wait your turn, yours probably hasn't even been made yet...

Rear center speaker doesn't produce sound! (AUDIGY 2

help, guys!
I just got my megaworks 650. it really took some time to get everthing pluged.
My sound card is Audigy 2 NX.
the thing is, in " speaker settings", when the option is set to "auto", the speakers are recognized as 5., so of course the rear center speaker is dumb; but even when i set it to 6. manually, the rear center speaker still remains dumb!
All the softwares are up-to-date. OS is windows XP Sp.
i really have no idea how to solve it...
appreciate any replies.

I dunno exactly where the model number is - it came with a quickstart instruction booklet, a CD, the card itself, and a cable. I installed the CD but had some driver problems and used the updated drivers from your website and did the full install. Here's the ebay page where I bought the card http://cgi.ebay.com/ws/eBayISAPI.dll...m=54629626&rd= I hope you can tell the model number by looking at the page, but if you can't can you tell me where the number can be found at?
EDIT: The only programs I could find under Programs > Creative are: Creative System Information and Product Registration. Under Programs > Creative > Sound Blaster Live! 5.1 I found: Creative AudioHQ, Creative Diagnostics, Creative Restore Defaults, Creative Surround Mixer, and User's Guide.
Message Edited by haeaznboiyoung on 12-09-2004 08:07 AM

Compiz doesn't automatically start anymore after gnome 2.30 update

My logs only show this "Apr 1 18:15:26 arch gnome-session[2435]: WARNING: Application 'compiz.desktop' failed to register before timeout" error. But i'm pretty sure it always showed that error even before i upgraded today.

Is it starting for you when you use "compiz --replace &" in terminal? For me it is, but without emerald, so I don't have any window borders...
EDIT: OMG, when I used Fusion-icon then it started normally... Weird...
EDIT2: I've changed in /usr/share/applications/compiz.desktop line where compiz is started from "compiz" to "/usr/bin/compiz ccp" and it's working now.
Last edited by megawebmaster (2010-04-01 20:15:46)

System Doesn't detect USB headset after suspend/resume

Sometimes (this seems to happen randomly), after a resume from suspend my USB headset is no longer detected in gnome. It doesn't show up in the sound settings output tab, and unplugging/replugging the headset does nothing. It does seem to show right up if I run pulseaudio -k to restart pulseaudio. It doesn't seem to matter if I suspended with the headset plugged in or not.
Has anyone else run into this issue, any workarounds or fixes?
Last edited by bwat47 (2012-02-28 20:03:14)

Let me quote archwiki here:
Standby / Suspend to RAM
In the ideal case, running sudo pm-suspend should initiate suspend to memory, meaning that all running state will be preserved in RAM and all components other than RAM will be shut down to conserve power. Pressing the power button should initiate a resume from this state.
In some cases, it is possible that running pm-suspend causes hangs or other issues. This may be due to specific "misbehaving" modules. If you know which modules could cause such issues, adding a SUSPEND_MODULES config to /etc/pm/config.d/modules of the form
SUSPEND_MODULES="uhci_hd button ehci_hd"
should cause these modules to be specifically unloaded before suspend and reloaded after resume.
To configure invoking pm-suspend automatically on power events like laptop lid close, please refer to Acpid.
and exactly those 2 modules you should add in the same way.. because those are responsible for usb... helped for me...
Last edited by Rasi (2012-02-28 21:21:46)

ALSA often doesn't produce sound anymore after suspend

Similar Messages

Maybe you are looking for