ALV  for user selection

Hi all,
          Can anyone help me  how can i get the ALV with check boxes when user selects particular records and selection process further will happen for that records.
Thanks in advance,

hiii....
for doing furthur selection to alv list display ..
go through the following link ..were code snippet is given /..
if you want check boxes
http://sap.ittoolbox.com/groups/technical-functional/sap-dev/adding-checkboxes-to-alv-530043
the extra peice of code that you have to add to fieldcat ...is given
and the sap help link for check boxes in alv ....is
http://help.sap.com/saphelp_sm32/helpdata/EN/26/46fb40f17af66fe10000000a1550b0/content.htm
he used radio buttons ...
http://wiki.sdn.sap.com/wiki/display/Snippets/ABAP-RadioButtonsinALVGRIDREPORT
I think the above information will do the job for you

Similar Messages

  • Unable to show all fields from a table\view within a SSRS Report Model for user selection

    I recently added a new view with a simple SELECT (with 3 fields) statement to our existing Report Model DSV. I then went ahead to the report model (.smdl) file proceeded with the auto-generation of the new attributes which of course ran with no issues.
    I was seeing the three new fields as attributes. But when I went within the existing Perspective to add the newly added fields so that the users see them, one of the field is missing. It is just a VARCHAR field. What would it cause this field to not show up
    within a Perspective?
    Any help is greatly appreciated.Thanks,
    Nimesh
    NM

    Hi NM,
    I am trying to involve someone more familiar with this topic for a further look at this issue. Sometime delay might be expected from the job transferring. Your patience is greatly appreciated.
    Thank you for your understanding and support.
    Regards,
    Katherine Xiong
    Katherine Xiong
    TechNet Community Support

  • Customizing user selection fields of Logical database PNP

    Dear Gurus,
    I had made a z-copy of payslip program for incorporation of Logo. Now we need to put this report in Enterprise Portal (EP). Now since we would not want any user to view any other person's payslip, I need to disable the selection field (PERNR) for user selection.
    Problem is this field for user selection is coming from standard Logical Database (LDB - PNP) used in the program. So how can I make this field hardcoded as sy-uname and non-modifiable without making z-copy of LDB-PNP.
    Also I wish to harcode Payroll Area writing some code (from table PA000) but again I cannot write this in std. PNP LDB and writing it in driver program will not help.
    Thanks in advance.
    Regards,
    Amit

    Write the highlighted coding in initialization ...
    initialization .
    select single pernr from pa0105
           into pernr-pernr
           where usrid = sy-uname.
    if sy-subrc = 0.
      PNPPERNR-sign = 'I'.
      PNPPERNR-option = 'EQ'.
      PNPPERNR-LOW = pernr-pernr.
      Append PNPPERNR.
    endif.
    loop at screen.
    if screen-name = 'PNPPERNR-LOW' or
    screen-name = 'PNPPERNR-HIGH'.
    screen-input = '0'.
    endif.
    modify screen.
    endloop.
    at selection-screen output.
    loop at screen.
    if screen-name = 'PNPPERNR-LOW' or
    screen-name = 'PNPPERNR-HIGH'.
    screen-input = '0'.
    endif.
    modify screen.
    endloop.

  • User exit/BADI  required for coding for the selection custom fields in RSA3

    Hi,
       I have a requirement  in the Datasource extractor. I need to add custom Z fields  in the Data souce of the  2LIS_02_SCL and need to include in the selection part. So I have added the custom filed in the append structure and include the check in the selection checkbox in the transaction LBWE  under the datasource specified above. For the corresponding custom fields, to be populated in the ALV list, I have written the code in corresponding user exit  ZXRSAU01.
    Now I can view my custom Z fields in the list as well as on the selection fileds  while executing the transaction RSA3. But I need to write code for the selection criteria part.  On entering value in the selection criteria of my custom z field, no  values are selected to the corresponding query. Please let me know where should i write the coding part for the selection criteria of the Z fields for the Datasource.
    On debugging, to my understanding only  the standard fields are alone getting filtered by providnig the values in the selection part of the RSA3 tcode. It is called in Macros : Sel  < Datasorce> .... and  the fetch cursor is included inside the macros.
    Please let me know any user exits or Badi;s available for it.
    Thanks in advance

    Hi shivu,
    you might try the BAdI RSU5_SAPI_BADI. A good introduction can be found in the following document:
    [Enhancing DataSources with BAdI RSU5_SAPI_BADI|http://www.sdn.sap.com/irj/scn/index?rid=/library/uuid/3001894b-b1fb-2910-77ba-e80b6f2053b7]
    The BAdI is called at the time of extraction, so this would be the right place to populate your additional fields.
    Best,
    Chris

  • When user select 1 row in alv some other rows must automaticaly get selecte

    When user selects say any row in alv with vbeln = 1234 all rows which have vbeln = 1234 also must get selected automaticaly.Is there some event to handle row selection in alv by clicking the push button beside each row to left of ALV?

    Hi
    U can implement an your push button in order to select the remaining rows: in user-command u need to implement a code where u get the selected line and the select the other.
    Or simply u can select the other lines as soon as the user do something after selecting a row.
    How to do it depends on whick kind of alv you're using: if the internal table fir output has a flag field for the marker, "To select a line" means to check that field.
    Max

  • Print parameters as per the user selection in ALV

    Hi All,
    We have a requriment for getting the print parametrs to print dialog as per the user selection in ALV list display.
    When the user click on 'Print' button In ALV list output screen, we need to capture the print parameters from a Z table and put those on the print parameters dialog box.
    I tried this , by calling the function GET_PRINT_PARAMETERS and SET_PRINT_PARAMETERS before the alv function is called. Unforutnately this is not working. Same code works for the simple list display.
    Have anyone worked with this kind of requriment ?
    Regards,
    Mithun

    What kind of ALV are you using, FM or OO?
    Regards,
    Rich Heilman

  • How to capture multiple rows of ALV grid when user selected?

    Actually,It is easy to get one single line.However, my user wants select several lines of ALV grid  by condition  .  i need to process the selected lines ,so i need to put these lines into an internal table. But now, i have no idea to capture the lines.
    What method for an ALV Grid will return the lines the user has selected?
    Appreciate for your help!
    Edited by: Heyman52 on Aug 25, 2010 4:28 AM
    Edited by: Heyman52 on Aug 25, 2010 4:30 AM

    Hi,
    Once user selects multiple rows and press another button for further execution, you can modify your internal table with marked rows using selection column.
    You need to add user command code in your ALV grid call. Please refer below code.
    CALL FUNCTION 'REUSE_ALV_GRID_DISPLAY'
          EXPORTING
            I_CALLBACK_PROGRAM       = SY-REPID
            I_CALLBACK_PF_STATUS_SET = 'F_GUI_STATUS'
            I_CALLBACK_USER_COMMAND  = 'F_USERCOMMAND'
            I_GRID_TITLE             = TEXT-026
            IS_LAYOUT                = WA_LAYOUT
            IT_FIELDCAT              = I_FIELDCAT
          TABLES
            T_OUTTAB                 = I_OUTTAB
          EXCEPTIONS
            PROGRAM_ERROR            = 1
            OTHERS                   = 2.
        IF SY-SUBRC NE 0.
          MESSAGE S475 DISPLAY LIKE 'E'.
          LEAVE LIST-PROCESSING.
        ENDIF.
    *- User command for details display.
        PERFORM F_USERCOMMAND USING I_UCOMM
                                    I_SELFIELD.
    FORM F_USERCOMMAND USING FP_R_UCOMM LIKE SY-UCOMM
                             FP_SELFIELD TYPE SLIS_SELFIELD.
    IF L_V_REF_GRID IS INITIAL.
        CALL FUNCTION 'GET_GLOBALS_FROM_SLVC_FULLSCR'
          IMPORTING
            E_GRID = L_V_REF_GRID.
      ENDIF.
      IF NOT L_V_REF_GRID IS INITIAL.
        CALL METHOD L_V_REF_GRID->CHECK_CHANGED_DATA.
      ENDIF.
    ENDFORM.
    You can then read your final internal table as below and take the selected records in another internal table.
    LOOP AT I_OUTTAB ASSIGNING <FS_OUTTAB> WHERE SEL EQ 'X'.
            APPEND <FS_OUTTAB> TO I_CHECK.
          ENDLOOP.
    Edited by: Archana Pawar on Aug 25, 2010 11:16 AM

  • Check box in ALV grid gets unselected for new selection

    Hi all,
    This is my code :
    TYPE-POOLS : slis.
    Variable
    DATA: g_repid LIKE sy-repid,
          g_title TYPE lvc_title,
          g_set_pf_stat TYPE slis_formname VALUE 'SET_PF_STATUS',
          g_user_command TYPE slis_formname VALUE 'USER_COMMAND',
          g_layout TYPE slis_layout_alv,
          g_print_alv TYPE slis_print_alv,
          g_variant LIKE disvariant,
          c_char_a(1) VALUE 'A',
          c_char_x(1) VALUE 'X',
          itab_alv_sort TYPE slis_t_sortinfo_alv,
          itab_alv_fcat TYPE slis_t_fieldcat_alv,
          fm_name type rs38l_fnam," Function Module Name
    *      l_sfctrlparams LIKE ssfctrlop, " Form Print Parameter
    *      l_sfoutopt LIKE ssfcompop,
          pri_params LIKE pri_params,
          c_x type c .
    *       Internal tables          Begin with IT_                       *
    DATA : it_fcat TYPE SLIS_T_FIELDCAT_ALV,                           "---ALV
           it_disp type table of ZLOI.
    *       Work Area for Internal tables      Begin with WA_             *
    data : wa_fcat TYPE slis_fieldcat_alv ,              "---ALV
           wa_layout           TYPE lvc_s_layo,               "---ALV
           wa_it_disp like line of it_disp.
    *       Objects                                                       *
    DATA : cref TYPE REF TO cl_gui_custom_container,          "---ALV
           gref TYPE REF TO cl_gui_alv_grid.                  "---ALV
    *        Start-of-selection
    Start-of-selection.
      perform fetch_po_det.
      perform build_fcat.
      perform alv_display.
    *&      Form  FETCH_PO_DET
    *       text
    *  -->  p1        text
    *  <--  p2        text
    FORM FETCH_PO_DET .
      data : it_po type table of crmd_orderadm_h,
               wa_po like line of it_po,
               wa_header type BBP_PDS_PO_HEADER_D.
      select  guid
              object_id
              DESCRIPTION
              POSTING_DATE
              CREATED_BY
      from crmd_orderadm_h
      into corresponding fields of table it_po
      where object_type = 'BUS2201'.
      loop at it_po into wa_po.
        move wa_po-object_id to wa_it_disp-ZZPONO.
        move wa_po-DESCRIPTION to wa_it_disp-ZZPODESC.
        move wa_po-posting_date to wa_it_disp-ZZPODATE.
        move wa_po-created_by to wa_it_disp-ZZPOCREATOR.
        CALL FUNCTION 'BBP_PD_PO_GETDETAIL'
          EXPORTING
            I_OBJECT_ID = wa_it_disp-zzpono
          IMPORTING
            E_HEADER    = wa_header.
        move wa_header-total_value to wa_it_disp-ZZPOVAL.
        move wa_header-currency to wa_it_disp-ZZPOCUR.
        append wa_it_disp to it_disp.
      endloop.
    *  write : wa_it_disp-zzpono.
    ENDFORM.                    " FETCH_PO_DET
    *&      Form  BUILD_FCAT
    *       text
    *  -->  p1        text
    *  <--  p2        text
    FORM BUILD_FCAT .
      g_repid = sy-repid.
      g_title = 'LOI details'.
      g_print_alv-no_print_listinfos = 'X'.
      g_variant-report = sy-repid.
      g_variant-variant = sy-title.
      CLEAR g_layout.
      g_layout-f2code = ' '.
      wa_layout-zebra       = 'X'.
      g_layout-flexible_key = 'X'.
      g_layout-colwidth_optimize = 'X'.
      g_layout-detail_initial_lines = 'X'.
      g_layout-box_fieldname = 'ZZCHECK'.
    *g_layout-box_tabname = 'ITAB_REPORT'.
    *Check box
      wa_fcat-fieldname = 'ZZCHECK'.
      wa_fcat-checkbox = 'X'.
      wa_fcat-outputlen = '1'.
      wa_fcat-col_pos = '1'.
      wa_fcat-edit = '1'.
      wa_fcat-seltext_m = 'No'.
      append wa_fcat to it_fcat.
    *Po no
      clear wa_fcat.
      wa_fcat-fieldname = 'ZZPONO' .
    wa_fcat-tabname = 'IT_DISP'.
    *  wa_fcat-seltext = 'Purchase Order'.
      wa_fcat-seltext_m  = 'Purchase Order'.
    *wa_fcat-seltext_s = 'Purchase Order.
    wa_fcat-icon = 'X'.
      wa_fcat-col_pos = '2'.
      wa_fcat-outputlen = 10.
      append wa_fcat to it_fcat.
    *Desc
      wa_fcat-fieldname = 'ZZPODESC' .
    wa_fcat-tabname = 'IT_DISP'.
    *wa_fcat-seltext_l = 'Description'.
      wa_fcat-seltext_m = 'Description'.
    *wa_fcat-seltext_s = 'Description'.
      wa_fcat-col_pos = '3'.
      wa_fcat-outputlen = 10.
      append wa_fcat to it_fcat.
    *Postign date
      wa_fcat-fieldname = 'ZZPODATE' .
    wa_fcat-tabname = 'IT_DISP'.
    wa_fcat-seltext_l = 'Posting Date'.
      wa_fcat-seltext_m = 'Posting Date'.
    *wa_fcat-seltext_s = 'Posting Date'.
      wa_fcat-col_pos = '4'.
      wa_fcat-outputlen = 8.
      append wa_fcat to it_fcat.
    *value
      wa_fcat-fieldname = 'ZZPOVAL' .
    wa_fcat-tabname = 'IT_DISP'.
    *wa_fcat-seltext_l = 'PO value'.
      wa_fcat-seltext_m = 'PO value'.
    *wa_fcat-seltext_s = 'PO value'.
      wa_fcat-col_pos = '5'.
      wa_fcat-outputlen = 15.
      append wa_fcat to it_fcat.
    *Currency
      wa_fcat-fieldname = 'ZZPOCUR' .
    wa_fcat-tabname = 'IT_DISP'.
    *wa_fcat-seltext_l = 'PO Currency'.
      wa_fcat-seltext_m = 'PO Currency'.
    *wa_fcat-seltext_s = 'PO Currency'.
      wa_fcat-col_pos = '6'.
      wa_fcat-outputlen = 5.
      append wa_fcat to it_fcat.
    *Creator
      wa_fcat-fieldname = 'ZZPOCREATOR' .
    wa_fcat-tabname = 'IT_DISP'.
    *wa_fcat-seltext_l = 'Buyer'.
      wa_fcat-seltext_m = 'Buyer'.
    *wa_fcat-seltext_s = 'Buyer'.
      wa_fcat-col_pos = '7'.
      wa_fcat-outputlen = 12.
      append wa_fcat to it_fcat.
    ENDFORM.                    " BUILD_FCAT
    *&      Form  ALV_DISPLAY
    *       text
    *  -->  p1        text
    *  <--  p2        text
    FORM ALV_DISPLAY .
      sort it_disp by ZZPONO.
      CALL FUNCTION 'REUSE_ALV_GRID_DISPLAY'
       EXPORTING
    *   I_INTERFACE_CHECK                 = ' '
    *   I_BYPASSING_BUFFER                = ' '
    *   I_BUFFER_ACTIVE                   = ' '
         I_CALLBACK_PROGRAM                = g_repid
         I_CALLBACK_PF_STATUS_SET          = g_set_pf_stat
         I_CALLBACK_USER_COMMAND           = g_user_command
    *   I_CALLBACK_TOP_OF_PAGE            = ' '
    *   I_CALLBACK_HTML_TOP_OF_PAGE       = ' '
    *   I_CALLBACK_HTML_END_OF_LIST       = ' '
    *   I_STRUCTURE_NAME                  =
    *   I_BACKGROUND_ID                   = ' '
          I_GRID_TITLE                      = g_title
    *   I_GRID_SETTINGS                   =
          IS_LAYOUT                         = g_layout
          IT_FIELDCAT                       = it_fcat[]
    *   IT_EXCLUDING                      =
    *   IT_SPECIAL_GROUPS                 =
    *   IT_SORT                           =
    *   IT_FILTER                         =
    *   IS_SEL_HIDE                       =
    *   I_DEFAULT                         = 'X'
    *   I_SAVE                            = ' '
          IS_VARIANT                        = g_variant
    *   IT_EVENTS                         =
    *   IT_EVENT_EXIT                     =
          IS_PRINT                          = g_print_alv
    *   IS_REPREP_ID                      =
    *   I_SCREEN_START_COLUMN             = 0
    *   I_SCREEN_START_LINE               = 0
    *   I_SCREEN_END_COLUMN               = 0
    *   I_SCREEN_END_LINE                 = 0
    *   I_HTML_HEIGHT_TOP                 = 0
    *   I_HTML_HEIGHT_END                 = 0
    *   IT_ALV_GRAPHICS                   =
    *   IT_HYPERLINK                      =
    *   IT_ADD_FIELDCAT                   =
    *   IT_EXCEPT_QINFO                   =
    *   IR_SALV_FULLSCREEN_ADAPTER        =
    * IMPORTING
    *   E_EXIT_CAUSED_BY_CALLER           =
    *   ES_EXIT_CAUSED_BY_USER            =
        TABLES
          T_OUTTAB                          = it_disp[]
       EXCEPTIONS
         PROGRAM_ERROR                     = 1
         OTHERS                            = 2
      IF SY-SUBRC <> 0.
    * MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
    *         WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
      ENDIF.
    ENDFORM.                    " ALV_DISPLAY
    *&      Form  user_command
    *       text
    *      -->R_UCOMM      text
    *      -->RS_SELFIELD  text
    FORM user_command USING r_ucomm LIKE sy-ucomm
    rs_selfield TYPE slis_selfield.                             "#EC CALLED
      CASE R_UCOMM.
        WHEN 'PRINT'.
          READ TABLE IT_disp INTO WA_IT_DISP WITH KEY ZZCHECK = 'X'.
          IF SY-SUBRC EQ 0.
            loop at it_DISP INTO WA_IT_DISP.
              CALL FUNCTION 'POPUP_TO_CONFIRM'
                EXPORTING
                  TEXT_QUESTION = 'Print the LOI details?'
                  TEXT_BUTTON_1 = 'Yes'
                  TEXT_BUTTON_2 = 'No'.
    *      IMPORTING
    *        ANSWER        = w_answer.
              IF SY-SUBRC  0.
              ENDIF.
    *          PERFORM CALL_SF.
            endloop.
          ENDIF.
        WHEN 'BACK'.
          LEAVE PROGRAM.
        WHEN 'EXIT'.
          LEAVE PROGRAM.
        WHEN 'CANCEL'.
          LEAVE PROGRAM.
      ENDCASE.
      rs_selfield-refresh = 'X'.
    ENDFORM.                    "user_command
    *&      Form  set_pf_status
    *       text
    *      -->RT_EXTAB   text
    FORM set_pf_status USING rt_extab TYPE slis_t_extab.
      SET PF-STATUS 'ZSTANDARD' EXCLUDING rt_extab.
      SET TITLEBAR sy-tcode.
    ENDFORM.                    "set_pf_status
    Now in my ALV grid o/p i can  see the check box  but if i select one row and then try to slect another the first one gets deselected.
    Can anybody tell me what is missing?

    Hi,
    if you need just a check box for each line, try to get rid of this line from your layout.
    g_layout-box_fieldname = 'ZZCHECK'.
    SAP uses this field to store info about selected lines. Hence you click on the second check box, you select different line and the first line is erased. You can select more line by holding SHIFT + CTRL
    Cheers

  • Hi all, i'm new and facing a problem while creating a new file for Xcode. I can't select the box "with XIB for user interface" if the subclass is "UIViewController".this problem happen after i upgrade Xcode to 4.6 version.Appreciate for any help rendered.

    Hi all, i'm new to Mac book & Xcode. I'm learning and facing problems while creating a new file for Xcode. Before i upgrade the software, i have no issue to create simple steps in apps. After upgrade Xcode to 4.6 version, i'm facing lot's of issue eg.
    1) "the identity "iphone developer" doesn't match any valid certificate/ private key pair",
    2) can't select the box "with XIB for user interface" if the subclass is "UIViewController"..
    Appreciate for any help rendered.

    Mikko777 wrote:So what is the best?
    I wouldn't judge. I've been to Arch for a week, you know? But as said, it's VERY close to it.
    What I dislike after a week is makepkg not handling dependencies automatically (which would be overhead, so probably not appropriate).
    Mikko777 wrote:Also theres KDEmod for modular kde, dunno if its for 64 bits tho.
    Don't actually need that as said ... I see no real benefit of having that other than not beeing a KDE user or having Gentoos useflags.
    Mikko777 wrote:PS:You produce a lot of text and welcome smile
    Yeah. Wonder why I'm still employed? So do I ...

  • How can I make a timer that turns on two relay channels where each channel can be on for different times of 0 to 10 seconds user selectable

    I am trying to make it clearer, I use a scxi-1161 and two of its relay channels to operate an MOV. I want to be able to apply power to two different pins on the MOV using two seperate relay channels.. but I want to be able to have it automatically cycle the two pins on and off by what time (in seconds) the user selects.. and the selection can be changed during cycling.

    Sorry I can't convert back to 5.1, but here are some pictures that might help. The mechanical action for the Start and Stop buttons is Latch When Released. In LabView 5.1, the While loop doesn't have a Stop if True option so you'll need to add an inverter between the terminal for the Stop button and the Continue terminal of the While loop.
    Attachments:
    TwoToggleTimers_frontpanel.jpg ‏31 KB
    TowToggleTimers_diagram_true.jpg ‏100 KB
    TowToggleTimers_diagram_false.jpg ‏99 KB

  • In making a form, I've used buttons for user to select a state. Can I make it go to cities next?

    I don't know the correct terminology, so I don't think that I've posed my question very well.  Employees will be using the form that I'm trying to make, and I want for them to be able to select a city from a large number of cities, and for that city to ultimately show up on the form (not merely in the data that is output.)
    I thought that the clearest way for them to select a city would be for them to start by selecting the pertinent state first.  That would allow the list of cities in that state to be shorter and more manageable.  So I'd like for them to be able to select a state, and then by virtue of that selection, have a list of cities pop up.  I sort of achieved that by using buttons for the states, and then under "actions", I chose "open a file".  Then I set it up to open a file that contained the cities that are options,and set each city with a button. 
    The result is that it goes from my form to a second window, containing states and then to a third window, containing cities.  (Actually, there are multiple "city" windows because there's a list of cities for each state.)  But then I'd like for the city that they select to wind up being on my original form.  Is there an "action" that I can choose that will make that happen?
    Or is there a better way to accomplish what I'm trying to accomplish?  Maybe I'm just going about this all wrong(?) Any suggestions would be very much appreciated  Thank you!

    Yes, there is a much better way. I'd recommend using a combo box for the list of states. When the user selects a state, the list of associated cities would populate a second combo box, allowing the user to select a city. This type of functionality relies on JavaScript. If you are unfamiliar with with JavaScript in Acrobat, I'd suggest starting with the following article: http://acrobatusers.com/tutorials/2007/js_list_combo_livecycle/
    Ignore anything to do with LiveCycle Designer. If you get stuck, post again.

  • Variable Selection For User in Web Interface for BPS

    Hi All,
    I've created a manual Input sheet in BPS0 to upload target sales. User need to select the month, plant and then enter the target amount for each category. Its working fine.
    Now I need to create web interface for user to upload the data every month. Using BPS_WB I've created the interface (with help of Wizard). I'm getting the input sheet. But I'm not able to get screen where user can select the parameters?
    How to get this? It should work like web report, where user select the report variables then execute. Only difference here is user will have to enter the data for selected variable.
    Thanks in advance.
    Regards: Gaurave

    Hi....add the variables to a folder along with the layout. Then create the web interface.

  • How to adjust mouse or trackpad parameters for the user selection screen?

    This is not critical, but annoying.  I can change the mouse or trackpad parameters by user, so anyone can use their own mouse or trackpad adjustment.  However I can not locate how to change this parameters for the welcome or user selection screen.  In my case I have two users, both of us use the trackpad with the one touch for click function, so no one press physically the trackpad for a click.  However, as the default parameter is the touch function deactivated we have to actually click the trackpad in that exclusive screen.
    Another example with mouse, normally we use the mouse with almost double of the default acceleration, but when in the user selection screen the mouse assumes default configuration and feels super SLOWWWWWWW.
    Again, this is not critical, but would be very nice to be able to modify this parameters in the welcome screen.
    Tyrone Carrion

    For the login screen, you are not associated with a normal user, but the system defaults...try logging in to the Admn account and change the behavior there...those settings should then apply to the login screen.

  • GPO - Restricts the UI languages Windows should use for the selected user - not applying correctly on RDS 2012 R2

    Hi All,
    we have a Citrix XenApp 7.5 Farm with Windows Server 2012 R2 Servers and multiple (english, german, italian, spanish, french...) languages installed.
    I've created a GPO with settings 'Restricts the UI languages Windows should use for the selected user' to for example 'German'.
    Now when a user logs on to the server, the UI language is in german, but when i open Control Panel\Language: There is still English (United States) with Keyboard Layout: US, German.
    It seems that the GPO is not changing all settings correctly to german.
    Does anybody know what could be wrong?
    best regards,
    Siegmund

    Hi Siegmund,
    >>Now when a user logs on to the server, the UI language is in german, but when i open Control Panel\Language: There is still English (United States) with Keyboard Layout: US, German
    Based on the description, the policy setting should have been applied successfully. Here, did we logged onto the server via remote desktop services? If yes, what's the keyboard layout on the computer we used to RDP to the server? Before going further,
    I assume that this can be caused by Auto detect Remote Keyboard layout feature introduced since Windows Server 2008.
    Regarding this point, the following artcile can be referred to for more information.
    Windows 2008 R2 Language Bar keeps changing Keyboard Settings
    http://www.microsoftpro.nl/2011/02/24/windows-2008-r2-language-bar-keeps-changing-keyboard-settings/
    Note: For the above website is not hosted by Microsoft, the link may become invalid without notice and Microsoft doesn't guarantee the accuracy of the information.
    In addition, the following thread can also be referred to for more information.
    2008 R2 Session Host with MUI controlled via Group Policy
    http://social.technet.microsoft.com/Forums/windowsserver/en-US/4e14955a-80f9-40aa-9741-fc8609f4ad09/2008-r2-session-host-with-mui-controlled-via-group-policy?forum=winserverGP
    Best regards,
    Frank Shen

  • Alv numbering and grid for line selection

    friends,
        how to give serial numbering in alv...the scenario is if the data is coming for the same item, then the serial no. should not get incremented..the serial no. has to change only when a particular item changes..then, how to give a grid or a box so that any particular line can be selected? thanks all..

    HI,
    for numbering you have to control it in program using looping.
    some thing like that.
    LOOP.
    at new item.
    endat.
    ENDLOOP.
    for line selection check the following code, line in bold should be noted.
    REPORT ZWA_ALV_SELECT_LINE_ITEM .
    TYPE-POOLS : slis.
    *-------------- Data
    DATA : BEGIN OF itab OCCURS 0.
            INCLUDE STRUCTURE t001.
    DATA : flag tyPE c,
    END OF itab.
    *DATA: itab like t001 occurs 0 with header line.
    DATA : alvfc TYPE slis_t_fieldcat_alv.
    DATA : alvly TYPE slis_layout_alv.
    data v_repid like sy-repid.
    *--------- Select Data
    v_repid = sy-repid.
    SELECT * FROM t001 INTO TABLE itab.
    *------- Field Catalogue
    call function 'REUSE_ALV_FIELDCATALOG_MERGE'
    exporting
    i_program_name = v_repid
    i_internal_tabname = 'ITAB'
    * I_STRUCTURE_NAME =
    * I_CLIENT_NEVER_DISPLAY = 'X'
    i_inclname = v_repid
    * I_BYPASSING_BUFFER =
    * I_BUFFER_ACTIVE =
    changing
    ct_fieldcat = alvfc[] .
    *---------------Display
    <b>alvly-box_fieldname = 'FLAG'.</b>
    CALL FUNCTION 'REUSE_ALV_GRID_DISPLAY'
         EXPORTING
              it_fieldcat             = alvfc[]
              i_callback_program      = v_repid  "<-------Important
              i_callback_user_command =
                 'ITAB_USER_COMMAND' "<------ Important
              is_layout               = alvly
         TABLES
              t_outtab                = itab
         EXCEPTIONS
              program_error           = 1
              OTHERS                  = 2.
    * CALL BACK FORM
    FORM itab_user_command USING whatcomm TYPE sy-ucomm whatrow TYPE
    slis_selfield.
    *--------- IMPORTANT.
      data : m(100) type c.
      m = whatrow-tabindex.
      condense m.
      concatenate 'Row Number is ' m into m separated by space.
    concatenate m ' : Field Clicked is ' whatrow-fieldname into m separated
      by space.
      message i000(su) with m.
    ENDFORM. "ITAB_user_command
    REgards,

Maybe you are looking for