ALV GRID DISPLAY -Problem with Layout

Hi,
I'm using ALV GRID DISPLAY. I ran the program and in the output i created a layout Test1.Later i created a layout Test2. Now when i run the report, when i select layout Test1, the display is not as selected for the layout. but when i manualy select the layout throu change layout-->Test1, the display is working good. Can someone tell me what the problem can be?
Thanks
Challa

hi,
in the FM have you filled the structure IS_VARIANT.
is_variant-report = sy-repid.
is_variant-variant = <variant name>.
Regards,
Leo

Similar Messages

ALV grid display problem...

can you please help me tell what is missing in this program....
its giving run time error NO_FIELDCATALOG_AVAILABLE.
Also if possible give a good example for ALV grid program
TABLES: bsak.
SELECTION-SCREEN BEGIN OF BLOCK b1 WITH FRAME TITLE text-010.
PARAMETERS : p_bukrs TYPE bsak-bukrs,
 p_augdt type bsak-augdt.
thanks!!
points willl be awarded
SELECTION-SCREEN END OF BLOCK B1.
TYPES : BEGIN OF st_bsak ,
 bukrs type bsak-bukrs,
 lifnr type bsak-lifnr,
 augdt type bsak-augdt,
 augbl type bsak-augbl,
 gjahr type bsak-gjahr,
 belnr type bsak-belnr,
 budat type bsak-budat,
 bldat type bsak-bldat,
 hkont type bsak-hkont,
 saknr type bsak-saknr,
 zlsch type bsak-zlsch,
 zlspr type bsak-zlspr,
 hbkid type bsak-hbkid,
 END OF st_bsak.
DATA it_bsak LIKE bsak OCCURS 0 WITH HEADER LINE.
SELECT bukrs
 lifnr
 augdt
 augbl
 gjahr
 belnr
 budat
 bldat
 hkont
 saknr
 zlsch
 zlspr
 hbkid
 FROM bsak
INTO (it_bsak-bukrs,
 it_bsak-lifnr,
 it_bsak-augdt,
 it_bsak-augbl,
 it_bsak-gjahr,
 it_bsak-belnr,
 it_bsak-budat,
 it_bsak-bldat,
 it_bsak-hkont,
 it_bsak-saknr,
 it_bsak-zlsch,
 it_bsak-zlspr,
 it_bsak-hbkid) UP TO 10 ROWS "need to change it to 65000 rows
WHERE bukrs = p_bukrs.
endselect.
CALL FUNCTION 'REUSE_ALV_GRID_DISPLAY'
EXPORTING
 I_STRUCTURE_NAME = 'st_bsak'
 I_GRID_TITLE = 'SALES ORDER INFO'
TABLES
 T_OUTTAB = it_bsak
 EXCEPTIONS
 PROGRAM_ERROR = 1
 OTHERS = 2
IF SY-SUBRC <> 0.
 MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
 WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
ENDIF.

hi,
try this.
*& Report ZALV_DS
REPORT zalv_ds.
TYPE-POOLS:slis.
TABLES:mara,
 makt,
 marc.
DATA:BEGIN OF itab OCCURS 0,
 matnr LIKE mara-matnr,
 maktx LIKE makt-maktx,
 werks LIKE marc-werks,
 rowcolor(4) TYPE c,
 cellcolors TYPE lvc_t_scol,
 END OF itab.
DATA:t_fcat TYPE slis_t_fieldcat_alv,
 t_eve TYPE slis_t_event.
DATA : st_layout TYPE slis_layout_alv.
SELECTION-SCREEN:BEGIN OF BLOCK blk1 WITH FRAME TITLE text-001.
SELECT-OPTIONS:mat FOR mara-matnr.
SELECTION-SCREEN:END OF BLOCK blk1.
INITIALIZATION.
PERFORM build_cata USING t_fcat.
PERFORM build_event.
START-OF-SELECTION.
PERFORM data_retrieval.
PERFORM display_data.
*& Form build_cata
 text
 -->TEMP_FCAT text
FORM build_cata USING temp_fcat TYPE slis_t_fieldcat_alv.
DATA:wa_fcat TYPE slis_fieldcat_alv.
wa_fcat-tabname = 'ITAB'.
wa_fcat-fieldname = 'MATNR'.
wa_fcat-seltext_m = 'Material'.
wa_fcat-key = 'X'.
APPEND wa_fcat TO temp_fcat.
wa_fcat-tabname = 'ITAB'.
wa_fcat-fieldname = 'MAKTX'.
wa_fcat-seltext_m = 'Description'.
wa_fcat-key = ''.
APPEND wa_fcat TO temp_fcat.
wa_fcat-tabname = 'ITAB'.
wa_fcat-fieldname = 'WERKS'.
wa_fcat-seltext_m = 'Plant'.
APPEND wa_fcat TO temp_fcat.
ENDFORM. "build_cata
*& Form build_event
 text
FORM build_event.
CALL FUNCTION 'REUSE_ALV_EVENTS_GET'
 EXPORTING
 i_list_type = 0
 IMPORTING
 et_events = t_eve
 EXCEPTIONS
 list_type_wrong = 1
 OTHERS = 2.
IF sy-subrc <> 0.
MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
 WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
ENDIF.
ENDFORM. "build_event
*& Form data_retrieval
 text
FORM data_retrieval.
SELECT maramatnr maktmaktx marc~werks INTO CORRESPONDING FIELDS OF TABLE itab
FROM mara INNER JOIN makt ON
maramatnr = maktmatnr
INNER JOIN marc ON
maramatnr = marcmatnr
WHERE mara~matnr IN mat.
SORT itab BY matnr.
DELETE ADJACENT DUPLICATES FROM itab.
ENDFORM. "data_retrieval
*& Form display_data
 text
FORM display_data.
CALL FUNCTION 'REUSE_ALV_GRID_DISPLAY'
 EXPORTING
 i_callback_program = 'ZALV_DS'
 it_fieldcat = t_fcat
 it_events = t_eve
 TABLES
 t_outtab = itab
 EXCEPTIONS
 program_error = 1
 OTHERS = 2.
IF sy-subrc <> 0.
MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
 WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
ENDIF.
ENDFORM. "display_data

Alv grid filter problem with oops display

HI experts ,
i am using o_alv->set_table_for_first_display
for displaying the data in the grid ,
i have a problem in filter for fields, when i am selecting any field for filtering , then size of that field becomes less then the orignal size , even search help on that field is shoun only 4 characters of dat fields.
ex: Bulding (field in alv) is a 9 character field but in filter when we select f4 help then it shows only first four characters, plz tell me the solution.

Hi Rahul
Try using output length in field catalogue for those fields. It may solve ur problem.
Venkat

Problem with ALV Grid Display screen Back Button

Dear Friends ,
I have an ALV Grid Display,Here am facing a problem for my 'Back' button,i haven't defined any PF Status and is using the standard one.But after the Display when i press Back Button a blank Screen is appearing n then again i have to press back button to go to my Selection Screen.
Please Suggest if i have to take care of something else.
I want my Selection Screen when i press Back on my Display Screen.
DATA: IT_FIELDCAT TYPE SLIS_T_FIELDCAT_ALV,
 FIELDCAT TYPE SLIS_FIELDCAT_ALV.
CALL FUNCTION 'REUSE_ALV_GRID_DISPLAY'
 EXPORTING
 I_BYPASSING_BUFFER =
 I_BUFFER_ACTIVE =
 I_INTERFACE_CHECK = ' '
 I_CALLBACK_PROGRAM = 'ZRMMPD01A'
 I_CALLBACK_PF_STATUS_SET = ' '
 I_CALLBACK_USER_COMMAND = ' '
 I_CALLBACK_TOP_OF_PAGE = ' '
 I_CALLBACK_HTML_TOP_OF_PAGE = ' '
 I_CALLBACK_HTML_END_OF_LIST = ' '
 I_STRUCTURE_NAME =
 I_BACKGROUND_ID = ' '
 I_GRID_TITLE =
 I_GRID_SETTINGS =
 IS_LAYOUT = I_LAYOUT
 IT_FIELDCAT = IT_FIELDCAT
 IT_EXCLUDING =
 IT_SPECIAL_GROUPS =
 IT_SORT =
 IT_FILTER =
 IS_SEL_HIDE =
 I_DEFAULT = 'X'
 I_SAVE = ' '
 IS_VARIANT =
 IT_EVENTS =
 IT_EVENT_EXIT =
 IS_PRINT =
 IS_REPREP_ID =
 I_SCREEN_START_COLUMN = 0
 I_SCREEN_START_LINE = 0
 I_SCREEN_END_COLUMN = 0
 I_SCREEN_END_LINE = 0
 IMPORTING
 E_EXIT_CAUSED_BY_CALLER =
 ES_EXIT_CAUSED_BY_USER =
 TABLES
 T_OUTTAB = IT_FINAL
 EXCEPTIONS
 PROGRAM_ERROR = 1
 OTHERS = 2
Thanks and Regards,
Ashwini

Hi Vijay ,
No i dont have any write statement in my proggram.
Here it is
REPORT ZRMMPD01A NO STANDARD PAGE HEADING.
TABLES : EQUI,SER03,MKPF,OBJK.
TYPE-POOLS : SLIS.
DATA IT_EQUI LIKE EQUI OCCURS 0 WITH HEADER LINE.
DATA IT_OBJK LIKE OBJK OCCURS 0 WITH HEADER LINE..
DATA IT_SER03 LIKE SER03 OCCURS 0 WITH HEADER LINE.
DATA IT_MKPF LIKE MKPF OCCURS 0 WITH HEADER LINE .
DATA : BEGIN OF IT_DISPLAY OCCURS 0,
 MATNR LIKE EQUI-MATNR,
 SERNR LIKE EQUI-SERNR,
 BWART LIKE SER03-BWART,
 WERK LIKE SER03-WERK,
 CHARGE LIKE SER03-CHARGE,
 LAGERORT LIKE SER03-LAGERORT,
 MBLNR LIKE SER03-MBLNR,
 MJAHR LIKE SER03-MJAHR,
 ZEILE LIKE SER03-ZEILE,
 BUDAT LIKE MKPF-BUDAT,
 BKTXT LIKE MKPF-BKTXT,
 USNAM LIKE MKPF-USNAM,
 XBLNR LIKE MKPF-XBLNR,
 END OF IT_DISPLAY.
DATA : WA_DISPLAY LIKE IT_DISPLAY.
DATA IT_FINAL LIKE IT_DISPLAY OCCURS 0 WITH HEADER LINE.
DATA IT_TEMP LIKE IT_DISPLAY OCCURS 0 WITH HEADER LINE.
DATA: IT_FIELDCAT TYPE SLIS_T_FIELDCAT_ALV,
 FIELDCAT TYPE SLIS_FIELDCAT_ALV.
DATA :I_LAYOUT TYPE SLIS_LAYOUT_ALV,
 I_EVENTS TYPE SLIS_T_EVENT.
SELECTION-SCREEN BEGIN OF BLOCK B1 WITH FRAME TITLE TEXT-001.
SELECT-OPTIONS : S_MATNR FOR EQUI-MATNR MATCHCODE OBJECT MCD,"OBLIGATORY
 S_SERNR FOR EQUI-SERNR, "MATCHCODE OBJECT MCD OBLIGATORY
 S_MBLNR FOR SER03-MBLNR MATCHCODE OBJECT MCD,
 S_BWART FOR SER03-BWART MATCHCODE OBJECT MCD,
 S_WERK FOR SER03-WERK MATCHCODE OBJECT MCD,
 S_LAGET FOR SER03-LAGERORT MATCHCODE OBJECT MCD,
 S_BUDAT FOR MKPF-BUDAT MATCHCODE OBJECT MCD,
 S_XBLNR FOR MKPF-XBLNR MATCHCODE OBJECT MCD.
SELECTION-SCREEN END OF BLOCK B1.
SELECTION-SCREEN BEGIN OF BLOCK B2 WITH FRAME TITLE TEXT-002.
PARAMETERS : R1 RADIOBUTTON GROUP G1 DEFAULT 'X',
 R2 RADIOBUTTON GROUP G1.
SELECTION-SCREEN END OF BLOCK B2.
START-OF-SELECTION.
*Fetch Data.
PERFORM GET_DATA.
*Fill Display Fields.
PERFORM FILL_TABLE.
*Segregate data according to radio button selection.
PERFORM SELECT_CONDITION.
*Fill The Feild catalog.
PERFORM FIELD_CATALOG.
*Display Output.
PERFORM OUTPUT_DISPLAY..
*& Form GET_DATA
 text
--> p1 text
<-- p2 text
FORM GET_DATA.
SELECT * FROM EQUI INTO TABLE IT_EQUI
 WHERE MATNR IN S_MATNR
 AND SERNR IN S_SERNR.
SELECT * FROM OBJK INTO TABLE IT_OBJK
FOR ALL ENTRIES IN IT_EQUI
WHERE EQUNR = IT_EQUI-EQUNR.
SELECT * FROM SER03 INTO TABLE IT_SER03
FOR ALL ENTRIES IN IT_OBJK
WHERE OBKNR = IT_OBJK-OBKNR
AND MBLNR IN S_MBLNR
AND BWART IN S_BWART
AND WERK IN S_WERK
AND LAGERORT IN S_LAGET.
SELECT * FROM MKPF INTO TABLE IT_MKPF
FOR ALL ENTRIES IN IT_SER03
WHERE MBLNR = IT_SER03-MBLNR
AND BUDAT IN S_BUDAT
AND XBLNR IN S_XBLNR.
ENDFORM. " GET_DATA
*& Form FILL_TABLE
 text
--> p1 text
<-- p2 text
FORM FILL_TABLE.
LOOP AT IT_EQUI.
 LOOP AT IT_OBJK.
 IF IT_OBJK-EQUNR <> IT_EQUI-EQUNR.
 SKIP.
 ELSE.
 READ TABLE IT_SER03 WITH KEY OBKNR = IT_OBJK-OBKNR.
 IF SY-SUBRC = 0.
 WA_DISPLAY-MATNR = IT_EQUI-MATNR.
 WA_DISPLAY-SERNR = IT_EQUI-SERNR.
 WA_DISPLAY-BWART = IT_SER03-BWART.
 WA_DISPLAY-WERK = IT_SER03-WERK.
 WA_DISPLAY-CHARGE = IT_SER03-CHARGE.
 WA_DISPLAY-LAGERORT = IT_SER03-LAGERORT.
 WA_DISPLAY-MBLNR = IT_SER03-MBLNR.
 WA_DISPLAY-MJAHR = IT_SER03-MJAHR.
 WA_DISPLAY-ZEILE = IT_SER03-ZEILE.
 READ TABLE IT_MKPF WITH KEY MBLNR = IT_SER03-MBLNR.
 IF SY-SUBRC = 0.
 WA_DISPLAY-BUDAT = IT_MKPF-BUDAT.
 WA_DISPLAY-BKTXT = IT_MKPF-BKTXT.
 WA_DISPLAY-USNAM = IT_MKPF-USNAM.
 WA_DISPLAY-XBLNR = IT_MKPF-XBLNR.
 ENDIF.
 ENDIF.
 ENDIF.
 IF NOT WA_DISPLAY IS INITIAL.
 APPEND WA_DISPLAY TO IT_DISPLAY.
 CLEAR WA_DISPLAY.
 ENDIF.
 ENDLOOP.
ENDLOOP.
ENDFORM. " FILL_TABLE
*& Form FIELD_CATALOG
 text
--> p1 text
<-- p2 text
FORM FIELD_CATALOG.
FIELDCAT-TABNAME = 'IT_DISPLAY'.
FIELDCAT-FIELDNAME = 'MATNR'.
FIELDCAT-SELTEXT_M = 'Material Number'.
FIELDCAT-OUTPUTLEN = 18.
APPEND FIELDCAT TO IT_FIELDCAT.
CLEAR FIELDCAT.
FIELDCAT-TABNAME = 'IT_DISPLAY'.
FIELDCAT-FIELDNAME = 'SERNR'.
FIELDCAT-SELTEXT_M = 'Serial number'.
FIELDCAT-OUTPUTLEN = 18.
APPEND FIELDCAT TO IT_FIELDCAT.
CLEAR FIELDCAT.
FIELDCAT-TABNAME = 'IT_DISPLAY'.
FIELDCAT-FIELDNAME = 'MBLNR'.
FIELDCAT-SELTEXT_L = 'Number of material document'.
FIELDCAT-OUTPUTLEN = 18.
APPEND FIELDCAT TO IT_FIELDCAT.
CLEAR FIELDCAT.
FIELDCAT-TABNAME = 'IT_DISPLAY'.
FIELDCAT-FIELDNAME = 'BWART'.
FIELDCAT-SELTEXT_M = 'Movement type'.
FIELDCAT-OUTPUTLEN = 18.
APPEND FIELDCAT TO IT_FIELDCAT.
CLEAR FIELDCAT.
FIELDCAT-TABNAME = 'IT_DISPLAY'.
FIELDCAT-FIELDNAME = 'WERK'.
FIELDCAT-SELTEXT_M = 'Plant'.
FIELDCAT-OUTPUTLEN = 5.
APPEND FIELDCAT TO IT_FIELDCAT.
CLEAR FIELDCAT.
FIELDCAT-TABNAME = 'IT_DISPLAY'.
FIELDCAT-FIELDNAME = 'CHARGE'.
FIELDCAT-SELTEXT_M = 'Batch number'.
FIELDCAT-OUTPUTLEN = 18.
APPEND FIELDCAT TO IT_FIELDCAT.
CLEAR FIELDCAT.
FIELDCAT-TABNAME = 'IT_DISPLAY'.
FIELDCAT-FIELDNAME = 'LAGERORT'.
FIELDCAT-SELTEXT_M = 'Storage Location'.
FIELDCAT-OUTPUTLEN = 18.
APPEND FIELDCAT TO IT_FIELDCAT.
CLEAR FIELDCAT.
FIELDCAT-TABNAME = 'IT_DISPLAY'.
FIELDCAT-FIELDNAME = 'MJAHR'.
FIELDCAT-SELTEXT_M = 'Material doc. year'.
FIELDCAT-OUTPUTLEN = 18.
APPEND FIELDCAT TO IT_FIELDCAT.
CLEAR FIELDCAT.
FIELDCAT-TABNAME = 'IT_DISPLAY'.
FIELDCAT-FIELDNAME = 'ZEILE'.
FIELDCAT-SELTEXT_L = 'Item in material document'.
FIELDCAT-OUTPUTLEN = 18.
APPEND FIELDCAT TO IT_FIELDCAT.
CLEAR FIELDCAT.
FIELDCAT-TABNAME = 'IT_DISPLAY'.
FIELDCAT-FIELDNAME = 'BUDAT'.
FIELDCAT-SELTEXT_L = 'Posting date in the document'.
FIELDCAT-OUTPUTLEN = 10.
APPEND FIELDCAT TO IT_FIELDCAT.
CLEAR FIELDCAT.
FIELDCAT-TABNAME = 'IT_DISPLAY'.
FIELDCAT-FIELDNAME = 'BKTXT'.
FIELDCAT-SELTEXT_L = 'Document header text'.
FIELDCAT-OUTPUTLEN = 25.
APPEND FIELDCAT TO IT_FIELDCAT.
CLEAR FIELDCAT.
FIELDCAT-TABNAME = 'IT_DISPLAY'.
FIELDCAT-FIELDNAME = 'USNAM'.
FIELDCAT-SELTEXT_M = 'User name'.
FIELDCAT-OUTPUTLEN = 15.
APPEND FIELDCAT TO IT_FIELDCAT.
CLEAR FIELDCAT.
FIELDCAT-TABNAME = 'IT_DISPLAY'.
FIELDCAT-FIELDNAME = 'XBLNR'.
FIELDCAT-SELTEXT_L = 'Reference document number'.
FIELDCAT-OUTPUTLEN = 25.
APPEND FIELDCAT TO IT_FIELDCAT.
CLEAR FIELDCAT.
ENDFORM. " FIELD_CATALOG
*& Form DISPLAY_OUTPUT
 text
--> p1 text
<-- p2 text
FORM OUTPUT_DISPLAY.
IF R1 = 'X'.
 CALL FUNCTION 'REUSE_ALV_GRID_DISPLAY'
 EXPORTING
 I_CALLBACK_PROGRAM = 'ZRMMPD01A'
 IS_LAYOUT = I_LAYOUT
 IT_FIELDCAT = IT_FIELDCAT
 TABLES
 T_OUTTAB = IT_DISPLAY
 EXCEPTIONS
 PROGRAM_ERROR = 1
 OTHERS = 2
 IF SY-SUBRC <> 0.
MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
 WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
 ENDIF.
 REFRESH IT_DISPLAY.
 CLEAR IT_DISPLAY.
ELSEIF R2 = 'X'.
 CALL FUNCTION 'REUSE_ALV_GRID_DISPLAY'
 EXPORTING
 I_CALLBACK_PROGRAM = 'ZRMMPD01A'
 IS_LAYOUT = I_LAYOUT
 IT_FIELDCAT = IT_FIELDCAT
 TABLES
 T_OUTTAB = IT_FINAL
 EXCEPTIONS
 PROGRAM_ERROR = 1
 OTHERS = 2
 IF SY-SUBRC <> 0.
MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
 WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
 ENDIF.
 REFRESH IT_DISPLAY.
 CLEAR IT_DISPLAY.
ENDIF.
ENDFORM. " DISPLAY_OUTPUT
*& Form SELECT_CONDITION
 text
--> p1 text
<-- p2 text
FORM SELECT_CONDITION.
IF R2 = 'X'.
 CLEAR WA_DISPLAY.
 SORT IT_DISPLAY BY MATNR SERNR MBLNR ZEILE.
 DELETE ADJACENT DUPLICATES FROM IT_DISPLAY.
 LOOP AT IT_DISPLAY WHERE ZEILE = '0002'.
 READ TABLE IT_DISPLAY WITH KEY MATNR = IT_DISPLAY-MATNR
 SERNR = IT_DISPLAY-SERNR ZEILE = '0001'.
 IF SY-SUBRC = 0.
 DELETE IT_DISPLAY.
 ENDIF.
 ENDLOOP.
 SORT IT_DISPLAY BY MATNR SERNR BWART MBLNR.
 DELETE ADJACENT DUPLICATES FROM IT_DISPLAY.
 LOOP AT IT_DISPLAY.
 IF WA_DISPLAY IS INITIAL.
 WA_DISPLAY = IT_DISPLAY.
 ENDIF.
 LOOP AT IT_DISPLAY WHERE MATNR = WA_DISPLAY-MATNR
 AND SERNR = WA_DISPLAY-SERNR.
 IF IT_DISPLAY-BUDAT > WA_DISPLAY-BUDAT.
 WA_DISPLAY = IT_DISPLAY.
 ELSE.
 DELETE IT_DISPLAY.
 ENDIF.
 ENDLOOP.
 APPEND WA_DISPLAY TO IT_TEMP.
 CLEAR WA_DISPLAY.
 ENDLOOP.
 DELETE ADJACENT DUPLICATES FROM IT_TEMP.
 IF NOT IT_TEMP[] IS INITIAL.
 IT_FINAL[] = IT_TEMP[].
 ENDIF.
ENDIF.
ENDFORM. " SELECT_CONDITION
Regards,
Ashwini

Problem with ALV Grid display

Hi,
I have developed ALV Grid Report. It is working fine.
But while i am coming from alv grid display to program
by pressing BACK button it is showing one more screen
which is empty. Again I press back button it is coming to
selection screen. I don't want that empty screen.What is
the problem. Can u help me in this regard.?
Thanks
Narasimha

hi
under the usercommand of back button use Exit Statement
like
At user-comand
IF sy-ucom = 'Back'
EXIT
ENdif.
Cheers
Snehi

Problem with check box in ALV Grid Display

I am Displaying Material Master Data in ALV Grid Display with Check Box for each record and if i checked check box then i am processing Update operation in Database, my question is after perform update operation check box should be clear.
Kindly help me!!!!

Hello Raj
Given the fact that you do not tell us the most important piece of information (namely whether you are using OO-based ALV or not) I assume you are using fm-based ALV lists.
In this case you probably have defined a USER_COMMAND routine as described in the documentation of the fm.
FORM user_command USING r_ucomm LIKE sy-ucomm
 rs_selfield TYPE slis_selfield.
* define local data
DATA: ls_outtab LIKE LINE OF gt_outtab,
 ld_idx TYPE i.
LOOP AT gt_outtab INTO ls_outtab
 WHERE ( chkbox = 'X' ).
 ld_idx = syst-tabix.
 " Call your update function / method / perform
 ls_outtab-chkbox = space.
 MODIFY gt_outtab FROM ls_outtab INDEX ld_Idx
 TRANSPORTING chkbox.
ENDLOOP.
" And now trigger refresh of the ALV display:
rs_selfield-refresh = 'X'. " <<< !!!
ENDFORM.
Regards
Uwe

Disabling "Default layout setting" in ALV grid display

Hello,
   We have a requirement where we need to disable layout default settings in ALV grid display.
   Only certain users should be able to save the report layout as default.
   We would be creating an authorization group for this and then based on the Authority check we would need to enable or disable Default layout save option.
I found that using I_SAVE in the FM "REUSE_ALV_GRID_DISPLAY", we can either enable or disable layout save option.
But our requirement is to disable Default layout save option based on the authority check.
We will find this option next to User specific option when we save the report layout.
Can anyone guide me on this?
Thanks,
Regards,
Anid

Hi Anid,
First of all check if you can do this excluding the buttons from the ALV with the excluding tab. If not, here is the code for the ALV OO to exclude the buttons.
FORM F_DISPLAY_ALV.
* Layout
PERFORM f_layout.
* Exclude Buttons
DATA: gt_excl           TYPE ttb_button
REFRESH gt_excl.
* Append those you want to exclude. These are some of them. Check Class in SE24 -> Atributes of class cl_gui_alv_grid.
APPEND: cl_gui_alv_grid=>mc_fc_loc_cut            TO gt_excl,
        cl_gui_alv_grid=>mc_fc_loc_undo           TO gt_excl,
        cl_gui_alv_grid=>mc_fc_loc_copy           TO gt_excl,
        cl_gui_alv_grid=>mc_fc_loc_paste          TO gt_excl,
        cl_gui_alv_grid=>mc_fc_loc_copy_row       TO gt_excl,
        cl_gui_alv_grid=>mc_fc_loc_move_row       TO gt_excl,
        cl_gui_alv_grid=>mc_fc_loc_delete_row     TO gt_excl,
        cl_gui_alv_grid=>mc_fc_loc_insert_row     TO gt_excl,
        cl_gui_alv_grid=>mc_fc_loc_append_row     TO gt_excl,
        cl_gui_alv_grid=>mc_fc_loc_paste_new_row TO gt_excl,
        cl_gui_alv_grid=>mc_fc_to_office          TO gt_excl,
        cl_gui_alv_grid=>mc_fc_expcrdesig         TO gt_excl.
CALL METHOD gv_alv_grid->set_table_for_first_display
    EXPORTING
      it_toolbar_excluding       = gt_excl[]
      is_layout                     = wa_layout_main
      is_variant                    = wa_variant
      i_save                        = 'A'
    CHANGING
      it_outtab                     = gt_alv[]
      it_fieldcatalog               = gt_fieldcat[]
      it_sort                       = gt_sort[].
Edited by: Ernesto Caballero on Mar 11, 2010 5:59 PM
Edited by: Ernesto Caballero on Mar 11, 2010 6:03 PM

ALV GRID Display Column Width problem when filtering

Hello All,
   When i displaying ALV Grid Display ,i selected one column and set filter for that.
the problem is column width at display is 12 charecters but in filter it is allowing only 10 charecters to enter which is wrong. i am unable to set filter.please give solution.
Thanks
Sandeep.G

hello i am calling perform, ineed to set OUTPUTLEN according to field length how can i do that.
FORM fill_fieldcat USING p_field TYPE slis_fieldcat_alv-fieldname
                           p_text TYPE slis_fieldcat_alv-seltext_l
                           p_flag TYPE c.
wa_fieldcat-fieldname    = p_field.
wa_fieldcat-seltext_l    = p_text.
wa_fieldcat-no_out = p_flag.
   wa_fieldcat-outputlen = 20.
APPEND wa_fieldcat TO i_fieldcat.
CLEAR wa_fieldcat.

ALV grid display with more than 1000 columns

Hi Friends,
I have to prepare a report output which have 1015 columns.
User will give 100 weeks of data to retrieve. I have to display the output in day wise.
100*7 + 315 = 1015 columns.
I am using ALV grid display for this in 4.6C.
My Question is, whether I have to declare the output table type with 1015 fields.?
Is there any other way to do this, without declaring 1015 cloumns.
Please guide me to solve this.
Regards,
Viji.

I'm thinking when your End-user will press Ctrl + P feeding A4 size to printer
Thomas:
Maybe the functional consultant is pulling your leg?
May be OP is pulling our legs or something further?
Cheers

How to merge rows with similar values in alv grid display in webdynpro

Hi experts,
i want to know about how to merge rows with similar values in alv grid display of webdynpro.grouping rows is possible in table display in webdynpro but i am not able to do row grouping in the alv grid display in webdynpro.
kindly suggest.
thanks ,
Anita.

Hi Anita,
did you find a solution for this? I have opened a Thread, if you know the answer maybe you could help me out:
Is there an ALV function similar to the TABLE Row grouping?
Thanx in advanced!!!
Kind Regards,
Gerardo J

Problem in placing the background in ALV Grid display

I have created one image of the business flow, and it have to be displayed in the background of ALV grid display.
For this I have gone to T.Code OAER , Given class name as PICTURES , Class type as OT , Object Key BACKGROUND, clicked on the triangle of Standard Doc , then double click on screen, and finally uploaded the background into SAP.
In the function module REUSE_ALV_GRID_DISPLAY I passed this background to the parameter I_BACKGROUND_ID.
It is working fine, and I was able to see the back ground in my program.
(developed in IDES)
But the same is not working in my development client, will some one suggest be the reason for the problem. Please kindly help me out from this problem.

hello Dinesh,
I have created the object key in the development client itself and used in the grid display of the same client. i am not understanding where the problem is, any how thank you very much for your responce. if you have any other solution please let me know.
Thank you

How to capture the checkbox status in ALV Grid display

I need some immediate help regarding Grid ALV.
My Requirement: I need to display an ALV grid report along with checkboxes. Further, I need to provide an option wherein the user can checkboxes and select the records that I need to process further (by clicking the process button on the ALV Report).
My Query: The problem here is that I am not able to capture the status of the checkboxes. This means that I am not able to capture which of the records have been selected by checking their resp checkboxes.
Solutions that I have tried: I have tried capturing the same at user command by checking the value in slis_selfield. But all the records show the value as 1 for the checkbox field.
Kinldy suggest how to go about it.
I am not using Object Oriented ALV. Please suggest something to be used in ALV Grid display in 4.6C version.
Regards,
Namrata

Here is a Sample code , it might help you
TABLES : sflight.
TYPE-POOLS: slis.
DATA : w_repid LIKE sy-repid.
w_repid = sy-repid.
DATA: BEGIN OF it_sflight OCCURS 0,
checkbox(1),
carrid LIKE sflight-carrid,
END OF it_sflight.
*layout
DATA: wa_layout TYPE slis_layout_alv.
*field catalog
DATA: it_fieldcatalog TYPE slis_t_fieldcat_alv,
          wa_fieldcatalog TYPE slis_fieldcat_alv.
START-OF-SELECTION.
SELECT carrid FROM sflight
     INTO CORRESPONDING FIELDS OF TABLE it_sflight.
END-OF-SELECTION.
CLEAR it_fieldcatalog.
REFRESH it_fieldcatalog.
wa_fieldcatalog-fieldname = 'CHECKBOX'.
wa_fieldcatalog-outputlen = '3'.
wa_fieldcatalog-col_pos = '1'.
wa_fieldcatalog-seltext_m = 'Chk'.
wa_fieldcatalog-checkbox = 'X'.
wa_fieldcatalog-edit = 'X'.
APPEND wa_fieldcatalog TO it_fieldcatalog.
CLEAR wa_fieldcatalog.
wa_fieldcatalog-fieldname = 'CARRID'.
wa_fieldcatalog-outputlen = '10'.
wa_fieldcatalog-col_pos = '2'.
wa_fieldcatalog-seltext_m = 'Carrid'.
APPEND wa_fieldcatalog TO it_fieldcatalog.
CLEAR wa_fieldcatalog.
CALL FUNCTION 'REUSE_ALV_GRID_DISPLAY'
    EXPORTING
      i_callback_program = w_repid
      is_layout = wa_layout
      i_callback_user_command = 'USER_COMMAND'
      it_fieldcat = it_fieldcatalog
    TABLES
      t_outtab = it_sflight
    EXCEPTIONS
      program_error = 1
      OTHERS = 2.
*& Form USER_COMMAND
FORM user_command USING p_ucomm TYPE sy-ucomm
p_selfld TYPE slis_selfield.
CASE p_ucomm.
   WHEN '&DATA_SAVE'.
      DATA ref1 TYPE REF TO cl_gui_alv_grid.
      CALL FUNCTION 'GET_GLOBALS_FROM_SLVC_FULLSCR'
         IMPORTING
           e_grid = ref1.
      CALL METHOD ref1->check_changed_data.
      LOOP AT it_sflight WHERE checkbox = 'X'.
         DELETE it_sflight INDEX sy-tabix.
      ENDLOOP.
      p_selfld-refresh = 'X'.
ENDCASE.
ENDFORM. "user_command

How to color a row in ALV grid display

Hi,
A few rows in the output of ALV grid display should be shown in different color.How can I achieve this?

Hi,
Try out this code
DATA : BEGIN OF G_T_CASH OCCURS 0,
 PARTICULARS TYPE CHAR120,
 AMOUNT1 TYPE CHAR20,
 AMOUNT2 TYPE CHAR20,
 AMOUNT3 TYPE CHAR20,
 ROW_COLOR TYPE CHAR4,----
add this in the internal table for alv
 END OF G_T_CASH.
CLEAR G_WA_CASH.
G_WA_CASH-PARTICULARS = 'Opening Cash Balance'.
G_WA_CASH-AMOUNT1 = G_DMBTR.
G_WA_CASH-AMOUNT2 = ''.
G_WA_CASH-AMOUNT3 = ''.
while appending other values also add the following code
G_WA_CASH-ROW_COLOR = 'C200'.----- C200 depicts light gray color
APPEND G_WA_CASH TO G_T_CASH.
add the following code in layout
MOVE 'ROW_COLOR' TO WA_LS_LAYOUT-INFO_FIELDNAME.
CALL FUNCTION 'REUSE_ALV_GRID_DISPLAY'
 EXPORTING
 I_BYPASSING_BUFFER = ' '
 I_SAVE = 'A'
 I_CALLBACK_PROGRAM = SY-REPID
I_CALLBACK_PF_STATUS_SET = 'SET_PF_STATUS'
 I_CALLBACK_USER_COMMAND = 'USER_COMMAND'
 IS_LAYOUT = WA_LS_LAYOUT
 IT_FIELDCAT = G_T_CATALOG
 IT_EVENTS = GT_EVENTS
 TABLES
 T_OUTTAB = G_T_CASH[]
EXCEPTIONS
 PROGRAM_ERROR = 1
 OTHERS = 2
IF SY-SUBRC <> 0.
 MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
 WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
ENDIF.
Let me know if the problem still persist.
Regards,
Janaki

Dump when summing up CURR field in ALV GRID display

Hi All,
I am getting dump when I try to sum the CURR field in my ALV Grid Display. The field is of CURR 23. I am using classes and methods to display alv grid.
I tried passing <fs_fieldcat>-do_sum = 'X'. When I did this, it is dumping without even displaying the alv grid.
Here is the part it is throwing dump:
 ls_lvc_data-value = space.
 clear ls_lvc_data-style.
 loop at it_fcat_local assigning <ls_fcat>
 where tech ne 'X' and no_out ne 'X'.
 if l_invisible eq 'X'.
 clear l_invisible.
 if <ls_fcat>-do_sum is initial.
 continue.
 else.
 clear ls_lvc_data-col_pos.
 endif.
 endif.
 add 1 to ls_lvc_data-col_pos.
 assign component <ls_fcat>-fieldname
 of structure <ls_data> to <l_field_value>.
 _if sy-subrc ne 0.
 message x000(0k).
 endif._
Regards,
Guru

Thomas,
Here is the dump:
Runtime Errors MESSAGE_TYPE_X
Date and Time 10/22/2010 23:30:53
Short text
The current application triggered a termination with a short dump.
What happened?
The current application program detected a situation which really
should not occur. Therefore, a termination with a short dump was
triggered on purpose by the key word MESSAGE (type X).
Error analysis
Short text of error message:
Long text of error message:
Technical information about the message:
Message class....... "0K"
Number.............. 000
Variable 1.......... " "
Variable 2.......... " "
Variable 3.......... " "
Variable 4.......... " "
How to correct the error
Probably the only way to eliminate the error is to correct the program.
If the error occures in a non-modified SAP program, you may be able to
find an interim solution in an SAP Note.
If you have access to SAP Notes, carry out a search with the following
keywords:
"MESSAGE_TYPE_X" " "
"SAPLSLVC" or "LSLVCF36"
"FILL_DATA_TABLE"
If you cannot solve the problem yourself and want to send an error
notification to SAP, include the following information:
1. The description of the current problem (short dump)
To save the description, choose "System->List->Save->Local File
(Unconverted)".
2. Corresponding system log
Display the system log by calling transaction SM21.
Restrict the time interval to 10 minutes before and five minutes
after the short dump. Then choose "System->List->Save->Local File
(Unconverted)".
3. If the problem occurs in a problem of your own or a modified SAP
program: The source code of the program
In the editor, choose "Utilities->More
Utilities->Upload/Download->Download".
4. Details about the conditions under which the error occurred or which
actions and input led to the error.
Source Code Extract
Line
SourceCde
2708
is_subtottxt_info = ls_subtot_info
2709
ip_subtot_line = lr_data
2710
changing
2711
c_subtottxt = l_subtottxt.
2712
ls_lvc_data-value = l_subtottxt.
2713
2714
append ls_lvc_data to ct_lvc_data.
2715
endif.
2716
2717
2718
Column per Fieldcat Entry
2719
2720
ls_lvc_data-value = space.
2721
clear ls_lvc_data-style.
2722
loop at it_fcat_local assigning <ls_fcat>
2723
where tech ne 'X' and no_out ne 'X'.
2724
if l_invisible eq 'X'.
2725
clear l_invisible.
2726
if <ls_fcat>-do_sum is initial.
2727
continue.
2728
else.
2729
clear ls_lvc_data-col_pos.
2730
endif.
2731
endif.
2732
2733
add 1 to ls_lvc_data-col_pos.
2734
2735
assign component <ls_fcat>-fieldname
2736
of structure <ls_data> to <l_field_value>.
2737
if sy-subrc ne 0.
>>>>>
message x000(0k).
2739
endif.
2740
2741
*... work on average
2742
if <ls_fcat>-do_sum eq 'C'.
2743
 Initialize average result and entries
2744
<l_field_value> = 0.
2745
clear l_entries.
2746
2747
 retrive unit from fieldcatalog
2748
assign space to <l_unit>.
2749
if not <ls_fcat>-cfieldname is initial.
2750
assign component <ls_fcat>-cfieldname
2751
of structure <ls_data> to <l_unit>.
2752
endif.
2753
if not <ls_fcat>-qfieldname is initial.
2754
assign component <ls_fcat>-qfieldname
2755
of structure <ls_data> to <l_unit>.
2756
endif.
2757

Field Catolgue in alv grid display

Hi Abapers,
I need to display the percentage rows with decimals and other rows without decimal . Is their any option in field catalog to do like this. Or tell me any other alternative to achieve this.
sno total col1 col2 col3
1 220 100 20 100
2 320 120 50 150
tot 540 220 70 250
per 40.74 1.87 and so on
or ,
I have two different internal tables how can i put it in one field catalog to pass it to alv grid display.
Regards,
Priya

Don't do total by your self in the Pogram.
in the Fieldcatalog there is an Attribute which will do total & Average .
Enable it so that from one internal table data it self it will do good.
example program
Below is an example ABAP program which will populate a simple internal table(it_ekpo) with data and
display it using the basic ALV grid functionality(including column total). The example details the main
sections of coding required to implement the ALV grid functionality:
 Data declaration
 Data retrieval
 Build fieldcatalog
 Build layout setup
REPORT zdemo_alvgrid .
TABLES: ekko.
type-pools: slis. "ALV Declarations
*Data Declaration
TYPES: BEGIN OF t_ekko,
ebeln TYPE ekpo-ebeln,
ebelp TYPE ekpo-ebelp,
statu TYPE ekpo-statu,
aedat TYPE ekpo-aedat,
matnr TYPE ekpo-matnr,
menge TYPE ekpo-menge,
meins TYPE ekpo-meins,
netpr TYPE ekpo-netpr,
peinh TYPE ekpo-peinh,
END OF t_ekko.
DATA: it_ekko TYPE STANDARD TABLE OF t_ekko INITIAL SIZE 0,
 wa_ekko TYPE t_ekko.
*ALV data declarations
data: fieldcatalog type slis_t_fieldcat_alv with header line,
 gd_tab_group type slis_t_sp_group_alv,
 gd_layout type slis_layout_alv,
 gd_repid like sy-repid.
*Start-of-selection.
START-OF-SELECTION.
perform data_retrieval.
perform build_fieldcatalog.
perform build_layout.
perform display_alv_report.
*& Form BUILD_FIELDCATALOG
* Build Fieldcatalog for ALV Report
form build_fieldcatalog.
* There are a number of ways to create a fieldcat.
* For the purpose of this example i will build the fieldcatalog manualy
* by populating the internal table fields individually and then
* appending the rows. This method can be the most time consuming but can
* also allow you more control of the final product.
* Beware though, you need to ensure that all fields required are
* populated. When using some of functionality available via ALV, such as
* total. You may need to provide more information than if you were
* simply displaying the result
* I.e. Field type may be required in-order for
* the 'TOTAL' function to work.
fieldcatalog-fieldname = 'EBELN'.
fieldcatalog-seltext_m = 'Purchase Order'.
fieldcatalog-col_pos = 0.
fieldcatalog-outputlen = 10.
fieldcatalog-emphasize = 'X'.
fieldcatalog-key = 'X'.
* fieldcatalog-do_sum = 'X'.
* fieldcatalog-no_zero = 'X'.
append fieldcatalog to fieldcatalog.
clear fieldcatalog.
fieldcatalog-fieldname = 'EBELP'.
fieldcatalog-seltext_m = 'PO Item'.
fieldcatalog-col_pos = 1.
append fieldcatalog to fieldcatalog.
clear fieldcatalog.
fieldcatalog-fieldname = 'STATU'.
fieldcatalog-seltext_m = 'Status'.
fieldcatalog-col_pos = 2.
append fieldcatalog to fieldcatalog.
clear fieldcatalog.
fieldcatalog-fieldname = 'AEDAT'.
fieldcatalog-seltext_m = 'Item change date'.
fieldcatalog-col_pos = 3.
append fieldcatalog to fieldcatalog.
clear fieldcatalog.
fieldcatalog-fieldname = 'MATNR'.
fieldcatalog-seltext_m = 'Material Number'.
fieldcatalog-col_pos = 4.
append fieldcatalog to fieldcatalog.
clear fieldcatalog.
fieldcatalog-fieldname = 'MENGE'.
fieldcatalog-seltext_m = 'PO quantity'.
fieldcatalog-col_pos = 5.
append fieldcatalog to fieldcatalog.
clear fieldcatalog.
fieldcatalog-fieldname = 'MEINS'.
fieldcatalog-seltext_m = 'Order Unit'.
fieldcatalog-col_pos = 6.
append fieldcatalog to fieldcatalog.
clear fieldcatalog.
fieldcatalog-fieldname = 'NETPR'.
fieldcatalog-seltext_m = 'Net Price'.
fieldcatalog-col_pos = 7.
fieldcatalog-outputlen = 15.
fieldcatalog-do_sum = 'X'. "Display column total
fieldcatalog-datatype = 'CURR'.
append fieldcatalog to fieldcatalog.
clear fieldcatalog.
fieldcatalog-fieldname = 'PEINH'.
fieldcatalog-seltext_m = 'Price Unit'.
fieldcatalog-col_pos = 8.
append fieldcatalog to fieldcatalog.
clear fieldcatalog.
endform. " BUILD_FIELDCATALOG
*& Form BUILD_LAYOUT
* Build layout for ALV grid report
form build_layout.
gd_layout-no_input = 'X'.
gd_layout-colwidth_optimize = 'X'.
gd_layout-totals_text = 'Totals'(201).
* gd_layout-totals_only = 'X'.
* gd_layout-f2code = 'DISP'. "Sets fcode for when double
* "click(press f2)
* gd_layout-zebra = 'X'.
* gd_layout-group_change_edit = 'X'.
* gd_layout-header_text = 'helllllo'.
endform. " BUILD_LAYOUT
*& Form DISPLAY_ALV_REPORT
* Display report using ALV grid
form display_alv_report.
gd_repid = sy-repid.
call function 'REUSE_ALV_GRID_DISPLAY'
 exporting
 i_callback_program = gd_repid
* i_callback_top_of_page = 'TOP-OF-PAGE' "see FORM
* i_callback_user_command = 'USER_COMMAND'
* i_grid_title = outtext
 is_layout = gd_layout
 it_fieldcat = fieldcatalog[]
* it_special_groups = gd_tabgroup
* IT_EVENTS = GT_XEVENTS
 i_save = 'X'
* is_variant = z_template
 tables
 t_outtab = it_ekko
 exceptions
 program_error = 1
 others = 2.
if sy-subrc <> 0.
* MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
* WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
endif.
endform. " DISPLAY_ALV_REPORT
*& Form DATA_RETRIEVAL
* Retrieve data form EKPO table and populate itab it_ekko
form data_retrieval.
select ebeln ebelp statu aedat matnr menge meins netpr peinh
up to 10 rows
from ekpo
into table it_ekko.
endform. " DATA_RETRIEVAL
gowri
Message was edited by:
 Gowri Krishna

ALV GRID DISPLAY -Problem with Layout

Similar Messages

Maybe you are looking for