ALV report on 2 pages
Hi,
I have a requirement in which i have to dispaly the output of a report using ALV's on two pages. The first page should display the summary categories of the costs being charged and the other pages will have details by G/L account of each of the cost categories on the first page. I am not sure how this will be done with ALV's.Please help.
Hi,
as u r not going to print, then uts not possible using reuse_alv_grid/list _display.
But its possible to display in 2 seperate blocks (not 2 separate pages) . using the follwing fm" Reuse_alv_block_list_init, reuse_alv_block_list_append, resue_alv_blck_list_display'.
the above 3 fm will display ur list in sepearet blocks.
Revrt back if any issues,
Reward if helpful.
regards,
Naveen
Similar Messages
-
Multiple ALV reports on one page
How to display multiple ALV reports on one page.
this done by this code....
*& Report ZPR_02
REPORT ZPR_02.
TYPE-POOLS: SLIS.
Tables Declaration.
TABLES: MARA.
*Internal tables and data declaration.
DATA: BEGIN OF IT_MARA OCCURS 0,
MATNR LIKE MARA-MATNR,
MTART LIKE MARA-MTART,
MBRSH LIKE MARA-MBRSH,
END OF IT_MARA,
BEGIN OF IT_MARC OCCURS 0,
MATNR LIKE MARC-MATNR,
WERKS LIKE MARC-WERKS,
EKGRP LIKE MARC-EKGRP,
END OF IT_MARC,
BEGIN OF IT_MARD OCCURS 0,
MATNR LIKE MARD-MATNR,
WERKS LIKE MARD-WERKS,
LGORT LIKE MARD-LGORT,
LABST LIKE MARD-LABST,
END OF IT_MARD.
DATA: WA_FIELD_CAT TYPE SLIS_FIELDCAT_ALV,
IT_FIELD_CAT1 TYPE SLIS_T_FIELDCAT_ALV,
IT_FIELD_CAT2 TYPE SLIS_T_FIELDCAT_ALV,
IT_FIELD_CAT3 TYPE SLIS_T_FIELDCAT_ALV,
WA_KEYINFO TYPE SLIS_KEYINFO_ALV,
IT_LAYOUT TYPE SLIS_LAYOUT_ALV,
IT_EVENTS1 TYPE SLIS_T_EVENT WITH HEADER LINE,
IT_EVENTS2 TYPE SLIS_T_EVENT WITH HEADER LINE,
IT_EVENTS3 TYPE SLIS_T_EVENT WITH HEADER LINE.
*Selection Screen.
SELECT-OPTIONS: S_MATNR FOR MARA-MATNR.
*Start Of selection.
START-OF-SELECTION.
*Selecting the data.
PERFORM SELECT_DATA.
*Populating the field catelogue.
PERFORM BUILD_FIELD_CAT.
*Displaying the final output.
PERFORM DISPLY_OUTPUT.
*& Form Select_data
Selecting the data.
FORM SELECT_DATA .
SELECT MATNR
MTART
MBRSH FROM MARA
INTO TABLE IT_MARA
WHERE MATNR IN S_MATNR.
IF NOT IT_MARA[] IS INITIAL.
SELECT MATNR
WERKS
EKGRP FROM MARC
INTO TABLE IT_MARC
FOR ALL ENTRIES IN IT_MARA
WHERE MATNR EQ IT_MARA-MATNR.
ENDIF.
IF NOT IT_MARC[] IS INITIAL.
SELECT MATNR
WERKS
LGORT
LABST FROM MARD
INTO TABLE IT_MARD
FOR ALL ENTRIES IN IT_MARC
WHERE MATNR = IT_MARC-MATNR
AND WERKS = IT_MARC-WERKS.
ENDIF.
ENDFORM. " Select_data
*& Form Build_field_cat
Populating the field catelogue.
FORM BUILD_FIELD_CAT .
DEFINE M_FIELDCAT1.
WA_FIELD_CAT-TABNAME = &1.
WA_FIELD_CAT-FIELDNAME = &2.
WA_FIELD_CAT-SELTEXT_L = &3.
APPEND WA_FIELD_CAT TO IT_FIELD_CAT1.
END-OF-DEFINITION.
DEFINE M_FIELDCAT2.
WA_FIELD_CAT-TABNAME = &1.
WA_FIELD_CAT-FIELDNAME = &2.
WA_FIELD_CAT-SELTEXT_L = &3.
APPEND WA_FIELD_CAT TO IT_FIELD_CAT2.
END-OF-DEFINITION.
DEFINE M_FIELDCAT3.
WA_FIELD_CAT-TABNAME = &1.
WA_FIELD_CAT-FIELDNAME = &2.
WA_FIELD_CAT-SELTEXT_L = &3.
APPEND WA_FIELD_CAT TO IT_FIELD_CAT3.
END-OF-DEFINITION.
M_FIELDCAT1 'MARA' 'MATNR' 'Material No'.
M_FIELDCAT1 'MARA' 'MTART' 'Material type'.
M_FIELDCAT1 'MARA' 'MBRSH' 'Industry Sector'.
M_FIELDCAT2 'MARC' 'MATNR' 'Material No'.
M_FIELDCAT2 'MARC' 'WERKS' 'Plant'.
M_FIELDCAT2 'MARC' 'EKGRP' 'Purchasing Group'.
M_FIELDCAT3 'MARD' 'MATNR' 'Material No'.
M_FIELDCAT3 'MARD' 'WERKS' 'Plant'.
M_FIELDCAT3 'MARD' 'LGORT' 'Storage Loc'.
M_FIELDCAT3 'MARD' 'LABST' 'Valued Stock'.
IT_EVENTS1-NAME = 'TOP_OF_PAGE'.
IT_EVENTS1-FORM = 'F_TOP_OF_PAGE_ONE'.
APPEND IT_EVENTS1.
CLEAR IT_EVENTS1.
IT_EVENTS2-NAME = 'TOP_OF_PAGE'.
IT_EVENTS2-FORM = 'F_TOP_OF_PAGE_TWO'.
APPEND IT_EVENTS2.
CLEAR IT_EVENTS2.
IT_EVENTS3-NAME = 'TOP_OF_PAGE'.
IT_EVENTS3-FORM = 'F_TOP_OF_PAGE_THREE'.
APPEND IT_EVENTS3.
CLEAR IT_EVENTS3.
ENDFORM. " Build_field_cat
*& Form disply_output
Displaying the final output.
FORM DISPLY_OUTPUT .
CALL FUNCTION 'REUSE_ALV_BLOCK_LIST_INIT'
EXPORTING
I_CALLBACK_PROGRAM = SY-REPID.
CALL FUNCTION 'REUSE_ALV_BLOCK_LIST_APPEND'
EXPORTING
IS_LAYOUT = IT_LAYOUT
IT_FIELDCAT = IT_FIELD_CAT1[]
I_TABNAME = 'IT_MARA'
IT_EVENTS = IT_EVENTS1[]
IT_SORT = IT_SORT
I_TEXT = ' '
TABLES
T_OUTTAB = IT_MARA .
CALL FUNCTION 'REUSE_ALV_BLOCK_LIST_APPEND'
EXPORTING
IS_LAYOUT = IT_LAYOUT
IT_FIELDCAT = IT_FIELD_CAT2[]
I_TABNAME = 'IT_MARC'
IT_EVENTS = IT_EVENTS2[]
IT_SORT = IT_SORT
I_TEXT = ' '
TABLES
T_OUTTAB = IT_MARC .
CALL FUNCTION 'REUSE_ALV_BLOCK_LIST_APPEND'
EXPORTING
IS_LAYOUT = IT_LAYOUT
IT_FIELDCAT = IT_FIELD_CAT3[]
I_TABNAME = 'IT_MARD'
IT_EVENTS = IT_EVENTS3[]
IT_SORT = IT_SORT
I_TEXT = ' '
TABLES
T_OUTTAB = IT_MARD .
CALL FUNCTION 'REUSE_ALV_BLOCK_LIST_DISPLAY'
EXPORTING
I_INTERFACE_CHECK = ' '
IS_PRINT = IS_PRINT
I_SCREEN_START_COLUMN = 0
I_SCREEN_START_LINE = 0
I_SCREEN_END_COLUMN = 0
I_SCREEN_END_LINE = 0
IMPORTING
E_EXIT_CAUSED_BY_CALLER = E_EXIT_CAUSED_BY_CALLER
ES_EXIT_CAUSED_BY_USER = ES_EXIT_CAUSED_BY_USER
EXCEPTIONS
PROGRAM_ERROR = 1
OTHERS = 2
IF SY-SUBRC <> 0.
MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
ENDIF.
ENDFORM. " disply_output
*& Form top_of_page_one
text
FORM F_TOP_OF_PAGE_ONE.
WRITE: / 'Header details (MARA)'.
ENDFORM. "top_of_page_one
*& Form top_of_page_one
text
FORM F_TOP_OF_PAGE_TWO.
WRITE: / 'Item details (MARC)'.
ENDFORM. "top_of_page_one
*& Form top_of_page_one
text
FORM F_TOP_OF_PAGE_THREE.
WRITE: / 'Item details (MARD)'.
ENDFORM. "top_of_page_one
regards,
venkat. -
In alv report , how to reserve 20 lines from beginning of page
hi experts
in alv report , how to reserve 20 lines from beginning of page.
regards
subhasis.If by reserve you mean should not move on scrolling then make them KEY from fieldcatalog.
But I think maximum of 10-12 can be handled by that.
Regards,
Amit
Reward all helpful replies. -
In an alv report how to get data in next and previous pages.
in my alv report i require the output such that
when i will press the next button in the application tool bar the alv report will be displayed for the next inventory document number in the next page. like wise previous
would anybody please help me out.
thanks and regards
pappsIn your servlet you could set the arraylist into the HttpRequest object so that it is visible in the JSP you are forwarding to.
RegistrationDAO rdao=new RegistrationDAO();
ArrayList arr1=rdao.getsearchresults(af);
request.setAttribute("someArrayList",arr1);Then in the JSP you could use JSTL 1.1 and jsp:useBean tag to access the ArrayList like this
<%@ page contentType="text/html;charset=UTF-8" language="java" %>
<%@ taglib prefix="c" uri="http://java.sun.com/jsp/jstl/core" %>
<jsp:useBean id="someArrayList" class="java.util.ArrayList" scope="request"/>
<c:forEach var="currentRecord" items="${someArrayList}">
Some property of the AddressForm object: ${currentRecord.propertyName} <br/>
Another property of the AddessForm object : ${currentRecord.someOtherPropertyName} <br/>
<hr/>
</c:forEach>I guess you are using struts, so instead of JSTL there might be some struts tags that do the same as above JSTL tags. You can research further on that.
If you can't use struts tags or JSTL tags then you could write it with JSP scriptlets (highly discouraged option). -
End of Page event not triggering in ALV report
Hello,
I am developing an ALV report using REUSE_ALV_LIST_DISPLAY. Whatever I write in top_of_page, it will be displayed in the header portion of the output.
But I want to display some footer text at the end of the page. The problem I am facing is, the WRITE statements within end_of_page are not displayed when the report is run.
I have populated the i_events as follows :
FORM f_events CHANGING p_i_events TYPE slis_t_event.
CONSTANTS : l_c_top_of_page TYPE slis_formname VALUE 'TOP_OF_PAGE',
l_c_end_of_page TYPE slis_formname VALUE 'END_OF_PAGE'.
DATA : l_wa_event TYPE slis_alv_event.
Returns table of possible events
CALL FUNCTION 'REUSE_ALV_EVENTS_GET'
EXPORTING
i_list_type = 0
IMPORTING
et_events = p_i_events.
To append internal table holding event names with event 'TOP OF PAGE'
READ TABLE p_i_events INTO l_wa_event
WITH KEY name = slis_ev_top_of_page.
IF sy-subrc = 0.
MOVE l_c_top_of_page TO l_wa_event-form.
APPEND l_wa_event TO p_i_events.
ENDIF.
To append internal table holding event names with event 'END OF PAGE'
READ TABLE p_i_events INTO l_wa_event
WITH KEY name = slis_ev_end_of_page.
IF sy-subrc = 0.
MOVE l_c_end_of_page TO l_wa_event-form.
APPEND l_wa_event TO p_i_events.
ENDIF.
ENDFORM. "f_events
Regds
RajeshHi have a look at the following code, and change ur code for end of page accordingly. this will resolve ur problem.
This is a basic ALV with the followings:-
- Page Heading
- Page No
- Sub-Total
- Grand Total
REPORT ZALV.
TYPE-POOLS: SLIS.
DATA: G_REPID LIKE SY-REPID,
GS_PRINT TYPE SLIS_PRINT_ALV,
GT_LIST_TOP_OF_PAGE TYPE SLIS_T_LISTHEADER,
GT_EVENTS TYPE SLIS_T_EVENT,
GT_SORT TYPE SLIS_T_SORTINFO_ALV,
GS_LAYOUT TYPE SLIS_LAYOUT_ALV,
GT_FIELDCAT TYPE SLIS_T_FIELDCAT_ALV,
FIELDCAT_LN LIKE LINE OF GT_FIELDCAT,
COL_POS TYPE I.
DATA: BEGIN OF ITAB,
FIELD1(5) TYPE C,
FIELD2(5) TYPE C,
FIELD3(5) TYPE P DECIMALS 2,
END OF ITAB.
DATA: BEGIN OF ITAB1 OCCURS 0.
INCLUDE STRUCTURE ITAB.
DATA: END OF ITAB1.
DATA: BEGIN OF ITAB_FIELDCAT OCCURS 0.
INCLUDE STRUCTURE ITAB.
DATA: END OF ITAB_FIELDCAT.
Print Parameters
PARAMETERS:
P_PRINT AS CHECKBOX DEFAULT ' ', "PRINT IMMEDIATE
P_NOSINF AS CHECKBOX DEFAULT 'X', "NO SELECTION INFO
P_NOCOVE AS CHECKBOX DEFAULT ' ', "NO COVER PAGE
P_NONEWP AS CHECKBOX DEFAULT ' ', "NO NEW PAGE
P_NOLINF AS CHECKBOX DEFAULT 'X', "NO PRINT LIST INFO
P_RESERV TYPE I. "NO OF FOOTER LINE
INITIALIZATION.
G_REPID = SY-REPID.
PERFORM PRINT_BUILD USING GS_PRINT. "Print PARAMETERS
START-OF-SELECTION.
TEST DATA
MOVE 'TEST1' TO ITAB1-FIELD1.
MOVE 'TEST1' TO ITAB1-FIELD2.
MOVE '10.00' TO ITAB1-FIELD3.
APPEND ITAB1.
MOVE 'TEST2' TO ITAB1-FIELD1.
MOVE 'TEST2' TO ITAB1-FIELD2.
MOVE '20.00' TO ITAB1-FIELD3.
APPEND ITAB1.
DO 50 TIMES.
APPEND ITAB1.
ENDDO.
END-OF-SELECTION.
PERFORM BUILD.
PERFORM EVENTTAB_BUILD CHANGING GT_EVENTS.
PERFORM COMMENT_BUILD CHANGING GT_LIST_TOP_OF_PAGE.
PERFORM CALL_ALV.
FORM BUILD.
DATA FIELD CATALOG
Explain Field Description to ALV
DATA: FIELDCAT_IN TYPE SLIS_FIELDCAT_ALV.
CLEAR FIELDCAT_IN.
FIELDCAT_LN-FIELDNAME = 'FIELD1'.
FIELDCAT_LN-TABNAME = 'ITAB1'.
*FIELDCAT_LN-NO_OUT = 'X'. "FIELD NOT DISPLAY, CHOOSE FROM LAYOUT
FIELDCAT_LN-KEY = ' '. "SUBTOTAL KEY
FIELDCAT_LN-NO_OUT = ' '.
FIELDCAT_LN-SELTEXT_L = 'HEAD1'.
APPEND FIELDCAT_LN TO GT_FIELDCAT.
CLEAR FIELDCAT_IN.
FIELDCAT_LN-FIELDNAME = 'FIELD2'.
FIELDCAT_LN-TABNAME = 'ITAB1'.
FIELDCAT_LN-NO_OUT = 'X'.
FIELDCAT_LN-SELTEXT_L = 'HEAD2'.
APPEND FIELDCAT_LN TO GT_FIELDCAT.
CLEAR FIELDCAT_IN.
FIELDCAT_LN-FIELDNAME = 'FIELD3'.
FIELDCAT_LN-TABNAME = 'ITAB1'.
FIELDCAT_LN-REF_FIELDNAME = 'MENGE'. "<- REF FIELD IN THE DICTIONNARY
FIELDCAT_LN-REF_TABNAME = 'MSEG'. "<- REF TABLE IN THE DICTIONNARY
FIELDCAT_LN-NO_OUT = ' '.
FIELDCAT_LN-DO_SUM = 'X'. "SUM UPON DISPLAY
APPEND FIELDCAT_LN TO GT_FIELDCAT.
DATA SORTING AND SUBTOTAL
DATA: GS_SORT TYPE SLIS_SORTINFO_ALV.
CLEAR GS_SORT.
GS_SORT-FIELDNAME = 'FIELD1'.
GS_SORT-SPOS = 1.
GS_SORT-UP = 'X'.
GS_SORT-SUBTOT = 'X'.
APPEND GS_SORT TO GT_SORT.
CLEAR GS_SORT.
GS_SORT-FIELDNAME = 'FIELD2'.
GS_SORT-SPOS = 2.
GS_SORT-UP = 'X'.
*GS_SORT-SUBTOT = 'X'.
APPEND GS_SORT TO GT_SORT.
ENDFORM.
FORM CALL_ALV.
ABAP List Viewer
CALL FUNCTION 'REUSE_ALV_LIST_DISPLAY'
EXPORTING
I_INTERFACE_CHECK = ' '
I_BYPASSING_BUFFER =
I_BUFFER_ACTIVE = ' '
I_CALLBACK_PROGRAM = G_REPID
I_CALLBACK_PF_STATUS_SET = ' '
I_CALLBACK_USER_COMMAND = ' '
I_STRUCTURE_NAME = 'ITAB1'
IS_LAYOUT = GS_LAYOUT
IT_FIELDCAT = GT_FIELDCAT[]
IT_EXCLUDING =
IT_SPECIAL_GROUPS =
IT_SORT = GT_SORT[]
IT_FILTER =
IS_SEL_HIDE =
I_DEFAULT = 'X'
I_SAVE = ' '
IS_VARIANT =
IT_EVENTS = GT_EVENTS[]
IT_EVENT_EXIT =
IS_PRINT = GS_PRINT
IS_REPREP_ID =
I_SCREEN_START_COLUMN = 0
I_SCREEN_START_LINE = 0
I_SCREEN_END_COLUMN = 0
I_SCREEN_END_LINE = 0
IMPORTING
E_EXIT_CAUSED_BY_CALLER =
ES_EXIT_CAUSED_BY_USER =
TABLES
T_OUTTAB = ITAB1
EXCEPTIONS
PROGRAM_ERROR = 1
OTHERS = 2.
ENDFORM.
HEADER FORM
FORM EVENTTAB_BUILD CHANGING LT_EVENTS TYPE SLIS_T_EVENT.
CONSTANTS:
GC_FORMNAME_TOP_OF_PAGE TYPE SLIS_FORMNAME VALUE 'TOP_OF_PAGE'.
*GC_FORMNAME_END_OF_PAGE TYPE SLIS_FORMNAME VALUE 'END_OF_PAGE'.
DATA: LS_EVENT TYPE SLIS_ALV_EVENT.
CALL FUNCTION 'REUSE_ALV_EVENTS_GET'
EXPORTING
I_LIST_TYPE = 0
IMPORTING
ET_EVENTS = LT_EVENTS.
READ TABLE LT_EVENTS WITH KEY NAME = SLIS_EV_TOP_OF_PAGE
INTO LS_EVENT.
IF SY-SUBRC = 0.
MOVE GC_FORMNAME_TOP_OF_PAGE TO LS_EVENT-FORM.
APPEND LS_EVENT TO LT_EVENTS.
ENDIF.
define END_OF_PAGE event
READ TABLE LT_EVENTS WITH KEY NAME = SLIS_EV_END_OF_PAGE
INTO LS_EVENT.
IF SY-SUBRC = 0.
MOVE GC_FORMNAME_END_OF_PAGE TO LS_EVENT-FORM.
APPEND LS_EVENT TO LT_EVENTS.
ENDIF.
ENDFORM.
FORM COMMENT_BUILD CHANGING GT_TOP_OF_PAGE TYPE SLIS_T_LISTHEADER.
DATA: GS_LINE TYPE SLIS_LISTHEADER.
CLEAR GS_LINE.
GS_LINE-TYP = 'H'.
GS_LINE-INFO = 'HEADER 1'.
APPEND GS_LINE TO GT_TOP_OF_PAGE.
CLEAR GS_LINE.
GS_LINE-TYP = 'S'.
GS_LINE-KEY = 'STATUS 1'.
GS_LINE-INFO = 'INFO 1'.
APPEND GS_LINE TO GT_TOP_OF_PAGE.
GS_LINE-KEY = 'STATUS 2'.
GS_LINE-INFO = 'INFO 2'.
APPEND GS_LINE TO GT_TOP_OF_PAGE.
CLEAR GS_LINE.
GS_LINE-TYP = 'A'.
GS_LINE-INFO = 'ACTION'.
APPEND GS_LINE TO GT_TOP_OF_PAGE.
ENDFORM.
FORM TOP_OF_PAGE.
CALL FUNCTION 'REUSE_ALV_COMMENTARY_WRITE'
EXPORTING
IT_LIST_COMMENTARY = GT_LIST_TOP_OF_PAGE.
WRITE: SY-DATUM, 'Page No', SY-PAGNO LEFT-JUSTIFIED.
ENDFORM.
FORM END_OF_PAGE.
WRITE at (sy-linsz) sy-pagno CENTERED.
ENDFORM.
PRINT SETTINGS
FORM PRINT_BUILD USING LS_PRINT TYPE SLIS_PRINT_ALV.
LS_PRINT-PRINT = P_PRINT. "PRINT IMMEDIATE
LS_PRINT-NO_PRINT_SELINFOS = P_NOSINF. "NO SELECTION INFO
LS_PRINT-NO_COVERPAGE = P_NOCOVE. "NO COVER PAGE
LS_PRINT-NO_NEW_PAGE = P_NONEWP.
LS_PRINT-NO_PRINT_LISTINFOS = P_NOLINF. "NO PRINT LIST INFO
LS_PRINT-RESERVE_LINES = P_RESERV.
ENDFORM.
*END OF ZALV PROGRAM
Satish -
How to give the no of lines per a page in alv report
hi
could u plz inform me
how to give the no of lines per page in alv report
in ordinary report we can give line-count na
how can we give in alvs.
thanx
kals.Hi Kalyan,
There is another Forum(Abap Development) where u can post abap related stuffs and u can also get quick answers there..
Cheers...
Santosh -
End-of-page event in alv report
Hi all,
I want to create end-of-page in alv report i have used event also
CALL FUNCTION 'REUSE_ALV_GRID_DISPLAY' * "
EXPORTING *
i_callback_program = sy-repid * "
i_callback_user_command = 'USER_COMMAND' * "
i_callback_top_of_page = 'TOP_OF_PAGE' * "
I_STRUCTURE_NAME = * "
it_fieldcat = fcat[] * "
it_events = it_event[] * "
TABLES
t_outtab = gtbl_pohead * "
EXCEPTIONS
program_error = 1 * "
OTHERS = 2 "
FORM end_of_page. *
DATA: listwidth TYPE i, *
ld_pagepos(10) TYPE c, *
ld_page(10) TYPE c. *
WRITE: sy-uline(50). "
SKIP 3.
WRITE:/40 'Page No',sy-pagno. "
ENDFORM. "END_OF_PAGE "hi
Search in SDN.You can find the solution for this.Before posting please search in SDN.
You have to use this FM 'REUSE_ALV_EVENTS_GET'
[End-Of-Page|http://www.sapdev.co.uk/reporting/alv/alvgrid_events.htm]
[Endo Of Page|http://www.sdn.sap.com/irj/scn/advancedsearch?query=alvend-of-pageevent+] -
End of Page event in ALV report using SALV class[cl_salv_hierseq_table]
Hi ,
have been working on a ALV report using the class SALV cl_salv_hierseq_table
I am facing few issues pertaining to two things:
1. Displaying some subtotal text along with the subtotals.
Example refer the standard demo example: SALV_DEMO_HIERSEQ_FORM_EVENTS
Now instead of A 17 and A26 I would like to show text like Subtotal for the Carrid.for subtotals and grand totals
Like Subtotal for A 17 is : XXXXXXX
GrandTotal is : YYYYYY
2. We have a page break and a new page for every purchasing group as in the standard example SALV_DEMO_HIERSEQ_FORM_EVENTS for CARRID.
I need to display some variable values as number of documents ,total number of records etc at the end of each CARRID group before a new page starts for the next CARRID.Please note i do not want it on every page.it should only be diaplyed at the end of page whose next page would be for next CARRID.[basically at end of every carrid]Example:after displaying all details for AA need to display the number of records for that carrid at the end of the page[as page break is based on CARRID]/
Thanks
Jyotsnaat end of page event, for CL_SALV_EVENTS_HIERSEQ, has some useful parameters allowing to know where you are at the time of event
parameter VALUE is of type CL_SALV_FORM which contains public attribute IF_SALV_FORM~ACCDESCRIPTION; you can slo get contents of it
about text of total/subtotal, this is normally set in the layout -
Hi all,
I use top of page to print page number for ALV report. When i run my report in backgrond and see the spool, the page is always started from page 2.
These does not happen when I use non-ALV report, report prints the header starting from page 1 normally. It is weird.
does anyone of you ever face such of that problem ?
thanks alots
AliaHi Alia,
Page number is usually not set in an ALV display, as compared to List processing.
r u sure this is a requirement?
chk this:
ALV Print page numbers
Regards,
Anjali -
How doi print Any variable at the end of page in ALV report?
Hi,
Anyone can tell me that How do i print Any variable at the end of page in ALV report?
Exmale: at the ende of alv report i want to print total no of employee who has taken house loan or education loan.Hi,
Go through these links
Thread in sdn regarding FOOTER IN ALV
[ALV FOOTER;
Wiki in sdn regarding HEADER AND FOOTER IN ALV
[https://wiki.sdn.sap.com/wiki/display/Snippets/ABAP%20Objects%20-%20ALV%20Model%20-%20Using%20Header%20and%20Footer]
Header and Footer in ALV
[http://www.sap-img.com/abap/test-alv-display-with-header-footer.htm]
Hope this helps.
Thank you,
Pavan. -
How to Display Page Numbers in ALV Report HTML End of page Event
hai Gurus
Greetings
Please tell me how to get current page noumber and total number of pages in ALV Report (in HTML End of Page Event)
i tried with sy-pagno system field but it is not working
so please guide me
Thanks
Rameshcheck below code....
*Work area for Layout
gf_layout type slis_layout_alv,
*Work area for HEADER FOOTER
gf_header type slis_listheader,
*Work area for Field catalogue
gf_fieldcat type slis_fieldcat_alv.
it_top_page type slis_t_listheader,
*Internal table for Field catalogue
it_fcat type slis_t_fieldcat_alv.
perform:fill_layout,
prepare_header,
field_catlog,
display_report.
Form fill_layout
form fill_layout .
gf_layout-colwidth_optimize = 'X'.
endform. " fill_layout
Form field_catlog
form field_catlog .
data : lf_fcat type line of slis_t_fieldcat_alv,
l_cnt type i.
clear : lf_fcat, l_cnt.
Employee Number
add 1 to l_cnt.
lf_fcat-fieldname = 'EMPLID'.
lf_fcat-tabname = 'IT_EMPLOYEE'.
lf_fcat-col_pos = l_cnt.
lf_fcat-emphasize = 'X'.
lf_fcat-outputlen = 8.
lf_fcat-seltext_l = text-003.
append lf_fcat to it_fcat.
clear lf_fcat.
*Last Name
add 1 to l_cnt.
lf_fcat-fieldname = 'USERNAME'.
lf_fcat-tabname = 'IT_EMPLOYEE'.
lf_fcat-col_pos = l_cnt.
lf_fcat-emphasize = 'X'.
lf_fcat-outputlen = 20.
lf_fcat-seltext_l = text-004.
append lf_fcat to it_fcat.
*First Name
add 1 to l_cnt.
lf_fcat-fieldname = 'EMPMAIL'.
lf_fcat-tabname = 'IT_EMPLOYEE'.
lf_fcat-col_pos = l_cnt.
lf_fcat-emphasize = 'X'.
lf_fcat-outputlen = 40.
lf_fcat-seltext_l = text-005.
append lf_fcat to it_fcat.
*Known As
clear lf_fcat.
add 1 to l_cnt.
lf_fcat-fieldname = 'EMPSTATUS'.
lf_fcat-tabname = 'IT_EMPLOYEE'.
lf_fcat-col_pos = l_cnt.
lf_fcat-emphasize = 'X'.
lf_fcat-outputlen = 10.
lf_fcat-seltext_l = text-006.
append lf_fcat to it_fcat.
clear lf_fcat.
*System UserID
add 1 to l_cnt.
lf_fcat-fieldname = 'COSTCENTER'.
lf_fcat-tabname = 'IT_EMPLOYEE'.
lf_fcat-col_pos = l_cnt.
lf_fcat-emphasize = 'X'.
lf_fcat-outputlen = 10.
lf_fcat-seltext_l = text-007.
append lf_fcat to it_fcat.
clear lf_fcat.
*EMail ID
add 1 to l_cnt.
lf_fcat-fieldname = 'DEPTDESC'.
lf_fcat-tabname = 'IT_EMPLOYEE'.
lf_fcat-col_pos = l_cnt.
lf_fcat-emphasize = 'X'.
lf_fcat-outputlen = 8.
lf_fcat-seltext_l = text-008.
append lf_fcat to it_fcat.
clear lf_fcat.
*Employment Status
add 1 to l_cnt.
lf_fcat-fieldname = 'LOC'.
lf_fcat-tabname = 'IT_EMPLOYEE'.
lf_fcat-col_pos = l_cnt.
lf_fcat-emphasize = 'X'.
lf_fcat-outputlen = 20.
lf_fcat-seltext_l = text-009.
append lf_fcat to it_fcat.
clear lf_fcat.
*Personnel Area
add 1 to l_cnt.
lf_fcat-fieldname = 'TITLE'.
lf_fcat-tabname = 'IT_EMPLOYEE'.
lf_fcat-col_pos = l_cnt.
lf_fcat-emphasize = 'X'.
lf_fcat-outputlen = 40.
lf_fcat-seltext_l = text-010.
append lf_fcat to it_fcat.
clear lf_fcat.
*Personnel Area Text
clear lf_fcat.
add 1 to l_cnt.
lf_fcat-fieldname = 'HDATE'.
lf_fcat-tabname = 'IT_EMPLOYEE'.
lf_fcat-col_pos = l_cnt.
lf_fcat-emphasize = 'X'.
lf_fcat-outputlen = 10.
lf_fcat-seltext_l = text-011.
append lf_fcat to it_fcat.
clear lf_fcat.
*Country Grouping text
add 1 to l_cnt.
lf_fcat-fieldname = 'MGRID'.
lf_fcat-tabname = 'IT_EMPLOYEE'.
lf_fcat-col_pos = l_cnt.
lf_fcat-emphasize = 'X'.
lf_fcat-outputlen = 10.
lf_fcat-seltext_l = text-012.
append lf_fcat to it_fcat.
clear lf_fcat.
*Cost Center
add 1 to l_cnt.
lf_fcat-fieldname = 'MGRNAME'.
lf_fcat-tabname = 'IT_EMPLOYEE'.
lf_fcat-col_pos = l_cnt.
lf_fcat-emphasize = 'X'.
lf_fcat-outputlen = 20.
lf_fcat-seltext_l = text-013.
append lf_fcat to it_fcat.
clear lf_fcat.
*Employee Group
add 1 to l_cnt.
lf_fcat-fieldname = 'MGMAIL'.
lf_fcat-tabname = 'IT_EMPLOYEE'.
lf_fcat-col_pos = l_cnt.
lf_fcat-emphasize = 'X'.
lf_fcat-outputlen = 40.
lf_fcat-seltext_l = text-014.
append lf_fcat to it_fcat.
clear lf_fcat.
*Organizational Unit
add 1 to l_cnt.
lf_fcat-fieldname = 'DIV'.
lf_fcat-tabname = 'IT_EMPLOYEE'.
lf_fcat-col_pos = l_cnt.
lf_fcat-emphasize = 'X'.
lf_fcat-outputlen = 25.
lf_fcat-seltext_l = text-015.
append lf_fcat to it_fcat.
clear lf_fcat.
*Supervisor
add 1 to l_cnt.
lf_fcat-fieldname = 'BUSUNIT'.
lf_fcat-tabname = 'IT_EMPLOYEE'.
lf_fcat-col_pos = l_cnt.
lf_fcat-emphasize = 'X'.
lf_fcat-outputlen = 25.
lf_fcat-seltext_l = text-016.
append lf_fcat to it_fcat.
clear lf_fcat.
endform. " field_catlog
Form display_report
form display_report .
data : l_repid type sy-repid.
clear l_repid.
l_repid = sy-repid.
call function 'REUSE_ALV_GRID_DISPLAY'
exporting
i_callback_program = l_repid
is_layout = gf_layout
it_fieldcat = it_fcat
i_callback_top_of_page = 'TOP-OF-PAGE'
tables
t_outtab = it_employee
exceptions
program_error = 1
others = 2.
endform. " display_report
Form PREPARE_HEADER
form prepare_header.
data:l_header1(20),
l_header2(60).
data:l_header3(20),
l_header4(60).
l_header1 = 'Met Life Census Data'.
l_header2+40(8) = 'Run Date'.
write sy-datum to l_header2+50(10).
header
gf_header-typ = 'S'.
gf_header-key = l_header1.
gf_header-info = l_header2.
append gf_header to it_top_page.
clear gf_header.
endform. " PREPARE_HEADER
form top-of-page.
call function 'REUSE_ALV_COMMENTARY_WRITE'
exporting
it_list_commentary = it_top_page.
endform. "TOP-OF-PAGE
*& Form end_of_list_html
output at the end of the list - not in printed output *
FORM END_OF_LIST_HTML USING END TYPE REF TO CL_DD_DOCUMENT.
DATA: LS_TEXT TYPE SDYDO_TEXT_ELEMENT,
L_GRID TYPE REF TO CL_GUI_ALV_GRID,
F(14) TYPE C VALUE 'SET_ROW_HEIGHT'.
LS_TEXT+0(20) = 'Total Employees'.
LS_TEXT+40(10) = g_count.
CALL METHOD END->ADD_TEXT
EXPORTING
TEXT = LS_TEXT
SAP_EMPHASIS = 'STRONG'.
*adds new line (start new line)
CALL METHOD END->NEW_LINE.
CALL FUNCTION 'GET_GLOBALS_FROM_SLVC_FULLSCR'
IMPORTING
e_grid = l_grid.
CALL METHOD l_grid->parent->parent->(f)
EXPORTING
id = 3
height = 10.
ENDFORM. -
How to declare top of page in alv report
hi guru
how to declare top of page in alv report
thanks
subhasisHi,
check this simple program.
REPORT ZBHALV_LIST.
TABLES:MARA.
SELECT-OPTIONS: MATNR FOR MARA-MATNR.
DATA:BEGIN OF ITAB OCCURS 0,
MATNR LIKE MARA-MATNR,
ERSDA LIKE MARA-ERSDA,
MTART LIKE MARA-MTART,
MBRSH LIKE MARA-MBRSH,
END OF ITAB.
SELECT * FROM MARA INTO CORRESPONDING FIELDS OF TABLE ITAB WHERE MATNR
IN MATNR.
TYPE-POOLS SLIS.
DATA:FCAT TYPE slis_t_fieldcat_alv.
DATA:LAYOUT TYPE slis_layout_alv.
DATA:EVE TYPE slis_t_event WITH HEADER LINE.
DATA:HEAD TYPE slis_t_listheader WITH HEADER LINE.
DATA:SORT TYPE slis_t_sortinfo_alv WITH HEADER LINE.
SORT-UP = 'X'.
SORT-SPOS = 1.
SORT-FIELDNAME = 'ERSDA'.
SORT-tabname = 'MARA'.
APPEND SORT.
SORT-SPOS = 2.
SORT-FIELDNAME = 'MTART'.
SORT-tabname = 'MARA'.
APPEND SORT.
EVE-NAME = 'TOP_OF_PAGE'.
EVE-FORM = 'TOPOFPAGE'.
APPEND EVE.
EVE-NAME = 'TOP_OF_LIST'.
EVE-FORM = 'TOPOFLIST'.
APPEND EVE.
EVE-NAME = 'END_OF_LIST'.
EVE-FORM = 'ENDOFLIST'.
APPEND EVE.
LAYOUT-ZEBRA = 'X'.
LAYOUT-no_hline = 'X'.
LAYOUT-NO_VLINE = 'X'.
LAYOUT-window_titlebar = 'MATERIAL DETAILS'.
CALL FUNCTION 'REUSE_ALV_FIELDCATALOG_MERGE'
EXPORTING
I_PROGRAM_NAME = SY-REPID
I_INTERNAL_TABNAME = 'ITAB'
I_STRUCTURE_NAME =
I_CLIENT_NEVER_DISPLAY = 'X'
I_INCLNAME = SY-REPID
I_BYPASSING_BUFFER =
I_BUFFER_ACTIVE =
CHANGING
CT_FIELDCAT = FCAT
EXCEPTIONS
INCONSISTENT_INTERFACE = 1
PROGRAM_ERROR = 2
OTHERS = 3
IF SY-SUBRC <> 0.
MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
ENDIF.
CALL FUNCTION 'REUSE_ALV_LIST_DISPLAY'
EXPORTING
I_CALLBACK_PROGRAM = SY-REPID
IS_LAYOUT = LAYOUT
IT_FIELDCAT = FCAT
IT_SORT = SORT[]
IT_EVENTS = EVE[]
TABLES
T_OUTTAB = ITAB .
IF SY-SUBRC <> 0.
MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
ENDIF.
FORM TOPOFPAGE.
REFRESH HEAD.
HEAD-TYP = 'H'.
HEAD-INFO = 'MATERIALS'.
APPEND HEAD.
CALL FUNCTION 'REUSE_ALV_COMMENTARY_WRITE'
EXPORTING
IT_LIST_COMMENTARY = HEAD[]
I_LOGO =
I_END_OF_LIST_GRID =
ENDFORM.
FORM TOPOFLIST.
REFRESH HEAD.
HEAD-TYP = 'H'.
HEAD-INFO = 'MATERIALS-LISTTOP'.
APPEND HEAD.
CALL FUNCTION 'REUSE_ALV_COMMENTARY_WRITE'
EXPORTING
IT_LIST_COMMENTARY = HEAD[]
I_LOGO =
I_END_OF_LIST_GRID =
ENDFORM.
FORM ENDOFLIST.
REFRESH HEAD.
HEAD-TYP = 'H'.
HEAD-INFO = 'MATERIALS-LISTEND'.
APPEND HEAD.
CALL FUNCTION 'REUSE_ALV_COMMENTARY_WRITE'
EXPORTING
IT_LIST_COMMENTARY = HEAD[]
I_LOGO =
I_END_OF_LIST_GRID =
ENDFORM.
Regards,
Priyanka. -
How to give no of lines per page in alv report
hi
could anybody tell me
how to give no of lines per page in alv report
i need bottom of page too
if possible plz send the code too
it ll be very helpful to me
thanx
kals.Hi,
This is possible, using some of the events in the ALV.
You could use AFTER_LINE_OUTPUT event and call you form after say, a certain line count is reached on the list output.
MOVE 'AFTER_LINE_OUTPUT' TO gw_event-name.
MOVE 'AFTER_LINE_OUTPUT' TO gw_event-form.
APPEND gw_event TO gt_events.
CALL FUNCTION 'REUSE_ALV_LIST_DISPLAY'
EXPORTING
it_events = gt_events[]
and define the form for each event as follows - this would be a dynamic call by the ALV.
*& Form after_line_output
* Form for the After Line Output Event in the internal table
* --> rs_lineinfo
FORM after_line_output USING rs_lineinfo TYPE slis_lineinfo.
IF sy-linno eq v_linno. "Defaulted value for line count
perform write_footer.
NEW-PAGE.
ENDIF.
ENDFORM. " after_line_output
For lines per page:
rs_lineinfo-tabindex would give you the index of the current line in the list, which you could use to read the t_outtab table, and reduce the line count of items displayed on the earlier page.
There are a few other events too, like BEFORE_LINE_OUTPUT and END_OF_LIST which you can use as required and print the data.
Regards,
Anil. -
ALV report that changes depending on Top-of-page info.
Hi,
The requirement is to create an ALV Grid Report that has a one of its field (say company code) in top-of-page. The values in ALV grid should be grouped for the company code. When the values for one company code end, the report should go to next page and have a next company code in top-of-page with its corresponding data.
While I know this can be done in classical report, I have not seen any example of ALV report for it. The solution to this could be just to have company code as one of the fields in ALV Grid and sort. But the client is unrelenting.
Please suggest.
Edited by: siddhesh kandalgaonkar on Jun 23, 2010 2:00 PMSiddhesh,
You could define buttons / controls ... called 'next comp code' and 'prev comp code', and then in the events for these controls you could re-populate the alv data table with the data for each company code each time a button is pressed.
Hope this helps ...
Duane -
Problem with Page Break In ALV Report
Hi
I have got a problem in my ALV report. I have a checkbox in the user input screen where users decide whether they want a page break or not in the print preview (or print) page. Now i also have the option to have layout name in the input screen. so If i leave the layout box empty the check or not check of page break works fine. but if use a save layout name in the layout box the add check box doesn't work anymore. If i have a layout name in the layout box it doesn't matter whether i have checked for page break or not it does the same thing.(in one report it always puts the page breaked)
Any ideas where to look for the error?
here is the code for the page break. Opt5 is the check box.
perform build_sort tables pt_sort changing ls_sort.
ls_sort-fieldname = 'PERNR'.
ls_sort-subtot = 'X'.
IF OPT5 = 'X'.
ls_sort-GROUP = '*'.
ENDIF.
append ls_sort to pt_sort.
ls_sort-subtot = ' '.
ls_sort-GROUP = ''.Never mind it was acting like the page break was not working because the layout was saved with the page break on/OFF.
Maybe you are looking for
-
OAS 4.0.8.1/Redhat 6.2? WRKSF problem
Hi, I've installed OAS 4.0.8.1 on Redhat 6.2 but when I start the processes up the WRKSF goes down after a few seconds, I've seen a previous posting on this subject had a workaround proposed by Dennis Irwin which seemed to work for many people, unfor
-
I keep getting the error message "apple application support is required to run itunes. Please uninstall itunes and then install it again." I've done this twice and still keep getting the same message...I'm at wits end Please HELP!!!
-
What is the use of T.Code: FAGLCOFIFLUP - Post CO Documents to FI?
Expects... What is the use of T.Code: FAGLCOFIFLUP - Post CO Documents to FI Accounting> Financial Accounting> General Ledger> Corrections> FAGLCOFIFLUP - Post CO Documents to FI Thanks & Regards Bhagiradha.P
-
Movie Purchases and 5.1 Surround
Recently I've been noticing some movies (such as Casino Royale and the just released Australia) come with 5.1 Surround Sound. When these are downloaded through iTunes, will they play in Surround on a Machine (given a proper system of course) or is it
-
FM K_LINE_ITEM_ACT_DATA_GET doesn not display result
HI Guys, FM K_LINE_ITEM_ACT_DATA_GET doesn't display result for one of my user. Instead of having to debug standard function , have anybody experienced this before and can tell if user might miss authorization ? please advice ...