ALV to PDF conversion problem

Hi Gurus,
I have 17 fields in ALV output ,which is to be converted into PDF report,
in normal layout it is converting only 5 fields into pdf (truncating rest of the fields )
while in landscape layout data is splliting into 2 lines ,and as a result pdf is not coming properly.
is there any way of doing this ,so that all fields can come in single line of PDF without truncating the data.
Please Respond,
Points will be rewarded ,
Regards
Talwinder

Hi
try by using this FM 'CONVERT_OTF'
CALL FUNCTION 'CONVERT_OTF'
EXPORTING
format = 'PDF'
max_linewidth = 132
ARCHIVE_INDEX = ' '
COPYNUMBER = 0
ASCII_BIDI_VIS2LOG = ' '
IMPORTING
bin_filesize = bin_filesize
BIN_FILE =
TABLES
otf = tab_otf_final
lines = pdf_tab
EXCEPTIONS
err_max_linewidth = 1
err_format = 2
err_conv_not_possible = 3
err_bad_otf = 4
OTHERS = 5
IF sy-subrc 0.
MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
ENDIF.
CALL METHOD cl_gui_frontend_services=>file_save_dialog
EXPORTING
WINDOW_TITLE =
DEFAULT_EXTENSION =
DEFAULT_FILE_NAME =
FILE_FILTER =
INITIAL_DIRECTORY =
WITH_ENCODING =
PROMPT_ON_OVERWRITE = 'X'
CHANGING
filename = FILE_NAME
path = FILE_PATH
fullpath = FULL_PATH
USER_ACTION =
FILE_ENCODING =
EXCEPTIONS
CNTL_ERROR = 1
ERROR_NO_GUI = 2
NOT_SUPPORTED_BY_GUI = 3
others = 4
IF sy-subrc 0.
MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
ENDIF.
************downloading the converted PDF data to your local PC*******
CALL FUNCTION 'GUI_DOWNLOAD'
EXPORTING
bin_filesize = bin_filesize
filename = FULL_PATH
filetype = 'BIN'
APPEND = ' '
WRITE_FIELD_SEPARATOR = ' '
HEADER = '00'
TRUNC_TRAILING_BLANKS = ' '
WRITE_LF = 'X'
COL_SELECT = ' '
COL_SELECT_MASK = ' '
DAT_MODE = ' '
CONFIRM_OVERWRITE = ' '
NO_AUTH_CHECK = ' '
CODEPAGE = ' '
IGNORE_CERR = ABAP_TRUE
REPLACEMENT = '#'
WRITE_BOM = ' '
TRUNC_TRAILING_BLANKS_EOL = 'X'
IMPORTING
filelength = file_size
TABLES
data_tab = pdf_tab
FIELDNAMES =
EXCEPTIONS
file_write_error = 1
no_batch = 2
gui_refuse_filetransfer = 3
invalid_type = 4
no_authority = 5
unknown_error = 6
header_not_allowed = 7
separator_not_allowed = 8
filesize_not_allowed = 9
header_too_long = 10
dp_error_create = 11
dp_error_send = 12
dp_error_write = 13
unknown_dp_error = 14
access_denied = 15
dp_out_of_memory = 16
disk_full = 17
dp_timeout = 18
file_not_found = 19
dataprovider_exception = 20
control_flush_error = 21
OTHERS = 22
IF sy-subrc 0.
ENDIF.

Similar Messages

HTML to PDF conversion - problems with page-breaks and bookmarks

Hello,
My company is currently considering updating your software (from Acrobat 9 Pro to Acrobat XI Pro) and I’ve been assigned to research its features and make sure that it is a right fit for our goals. Basically we want to automate the whole process as much as possible and we want to create PDF directly from HTML. We’re providing a lot of content in HTML and we need a fast way to transfer it into PDF format. There are however some guidelines:
We want page-breaks in is this kind of documents, and thus - your app needs to be able to interpret HTML and put them where we want to;
We need to have bookmarks in there. Converter must be able to make them based on headlines from HTML source or afterwards, directly in PDF by using some auto-bookmarks feature;
There has to be table of content generated, based on HTML Link Tags if possible. Here’s sample of TOC structure that we have currently:
<A NAME="redirect">sample_text</A>
<A HREF="#redirect">sample_text</A>
Of course we can modify HTML in any way you want us to. The important thing for us is to make it work in PDF without the need to make a lot of manual changes after conversion.
I’ve been messing with Acrobat 9 Pro and reading some documentation that you have provided and I’m convinced that point 3 is not a problem. I’m aware that Acrobat 9 Pro is not having any difficulties with links in document and they work fine in PDF format that has been created from HTML.
Page-breaks on the other hand are bothering me. Your app is apparently ignoring every HTML code that the Internet is advising me to use to force page-break where I want. Honestly - I’ve tested like ten ways to make them and not even one was working. That’s why I’m asking for your help.
Another problematic subject for me is the bookmarks creation. I know that they are not a problem if I’m doing DOC to PDF conversion. Then I’m able to decide what header should be used as a curtain level of bookmarks and everything is working great at the end. However - with direct HTML to PDF conversion - I really don’t know how to generate bookmarks that are based on the source of the input document. Is there any way to make fully working 2 level bookmark tree in this case? Here’s an example of the structure we want at the end:
header1
header2
header2
header1
header1
header2
Could you please help me in finding the solutions? Just like I’ve mentioned - we can modify input HTML in any way, but in the end we would like to achieve our goals as quickly as possible.
Please excuse my English.
I am looking forward to your response,
Lucas

Frankly - we would like to avoid using Word. We are using it currently but there are long-term plans of improving whole conversion process, eliminate any mid-steps and automate as much as possible even though conversion is not going to be done unattended on a server. Thank you for your response, but I hope that maybe someone else would have any idea?

ALV to PDF conversion with a page break

Friends,
I have a need where I need to print ALV in PDF format with a page break. Any advice on how to do this ? Is it possible to print in PDF format in ver ECC 6.0 without using OTF conversion routine ?
I tried to create a new device type PDF got an error in the spool when tried to print ?
Thanks,
Abap PM

Hi,
Check the below links.
[LINK1|https://wiki.sdn.sap.com/wiki/display/Snippets/SaveReportOutputtoaPDFFile]
[LINK2|Convert ABAP Report's Output into PDF Format..;
[LINK3|https://wiki.sdn.sap.com/wiki/display/ABAP/PDF%20Downlaod%20By%20Creating%20Spool%20Request]
Thanks,
Sreekanth

PDF Conversion problem

Hi ABAPers
While sending smartform as a mail attachment(PDF Format) i am facing problem.
While opening the PDF attachment in SOST (T-code), It shows a error pop up.(I.e., Conversion Problem in PDF). Some pages are getting opened as a blank page and some are not getting opened.
What may be the prolem.
Please help Me out ............
But it works properly in IDES version.
In IDES i have ADOBE 5.0 Version, In Live server it is ADOBE 6.0 ,7.0.

Hi,
Thanks for your feedback
There is no problem in the coding , is there any thing we have to do in configuration level regarding PDF ?????
*& Report ZVNPAML
REPORT zvnpaml.
TABLES: somlrec90.
DATA: it_zvnpa TYPE TABLE OF zvnpa,
 it_zvnpa1 TYPE TABLE OF zvnpa,
 wa_zvnpa TYPE zvnpa,
 it_head TYPE TABLE OF zvnpa,
 it_head1 TYPE TABLE OF zvnpa,
 wa_head TYPE zvnpa,
 wa_head1 TYPE zvnpa,
 fmname TYPE rs38l_fnam,
 tot TYPE zvnpa-wrshb,
 otfout TYPE ssfcrescl,
 outopt type SSFCRESOP,
 pdftab TYPE TABLE OF tline WITH HEADER LINE,
 datab TYPE TABLE OF itcoo WITH HEADER LINE,
 conpar TYPE ssfctrlop,
 mailrec TYPE swotobjid,
 outopt TYPE ssfcompop,
 jobopt TYPE ssfcresop,
 jobout TYPE ssfcrescl,
 w_return TYPE ssfcrescl,
 it_otf TYPE itcoo OCCURS 0 WITH HEADER LINE,
 binsz LIKE sood-objlen,
 i_tline TYPE TABLE OF tline WITH HEADER LINE,
 wa_buffer TYPE string,"To convert from 132 to 255
 i_record LIKE solisti1 OCCURS 0 WITH HEADER LINE.
DATA: wa_doc_data TYPE sodocchgi1,
 it_pack TYPE TABLE OF sopcklsti1,
 wa_pack TYPE sopcklsti1,
 it_mailhead TYPE TABLE OF solisti1, " OCCURS 1 WITH HEADER LINE,
 wa_mailhead TYPE solisti1,
 it_mailbody TYPE TABLE OF solisti1, " OCCURS 0 WITH HEADER LINE,
 wa_mailbody TYPE solisti1,
 it_receiverid TYPE TABLE OF somlrec90, " OCCURS 10 WITH HEADER LINE.
 wa_receiverid TYPE somlrec90,
 it_attach LIKE solisti1 OCCURS 0 WITH HEADER LINE,
 wa_attach TYPE solisti1,
 lncnt TYPE i.
DATA: lv_spool TYPE tsp01-rqident,
 wa_line TYPE tsp01-rqident,
 it_pdf_output TYPE TABLE OF tline.
SELECTION-SCREEN BEGIN OF BLOCK vendor WITH FRAME TITLE text-w03.
*PARAMETERS: pa_lifnr TYPE lfa1-lifnr,
 pa_bukrs TYPE zvnpa-bukrs,
PARAMETERS: pa_augdt TYPE zvnpa-augdt.
SELECT-OPTIONS: pa_mail FOR somlrec90-receiver NO INTERVALS.
SELECTION-SCREEN END OF BLOCK vendor.
SELECT * FROM zvnpa INTO CORRESPONDING FIELDS OF TABLE it_zvnpa1
 WHERE augdt = pa_augdt
 AND bukrs = '2000'
 AND flag <> 'X'.
 konto = pa_lifnr AND
 bukrs = pa_bukrs AND
IF it_zvnpa1 IS NOT INITIAL.
SORT it_zvnpa1 BY konto.
LOOP AT it_zvnpa1 INTO wa_zvnpa.
 APPEND wa_zvnpa TO it_zvnpa.
 CLEAR: wa_zvnpa.
 AT END OF konto.
 SORT it_zvnpa BY ttref augbl wrshb shkzg.
*it_head[] = it_zvnpa[].
 LOOP AT it_zvnpa INTO wa_zvnpa WHERE shkzg = 'S'.
 APPEND wa_zvnpa TO it_head1.
 CLEAR: wa_zvnpa.
 ENDLOOP.
*delete adjacent duplicates from it_head comparing ttref.
 SORT it_head1 BY ttref augbl wrshb shkzg.
 LOOP AT it_head1 INTO wa_head1.
 tot = tot + wa_head1-wrshb.
 wa_head = wa_head1.
 AT END OF ttref.
 wa_head-wrshb = tot.
 APPEND wa_head TO it_head.
 CLEAR: wa_head,tot.
 ENDAT.
 CLEAR: wa_head1.
 ENDLOOP.
 SORT it_head BY ttref augbl wrshb shkzg.
 CALL FUNCTION 'SSF_FUNCTION_MODULE_NAME'
 EXPORTING
 formname = 'ZVNPASF'
 IMPORTING
 fm_name = fmname.
 conpar-no_dialog = 'X'.
 conpar-getotf = 'X'.
 outopt-tddest = 'LOCL'.
 outopt-urlcall = fmname.
 outopt-tdnoprev = 'X'.
 outopt-tdnewid = 'X'.
 CALL FUNCTION fmname
 EXPORTING
ARCHIVE_INDEX =
ARCHIVE_INDEX_TAB =
ARCHIVE_PARAMETERS =
 control_parameters = conpar
MAIL_APPL_OBJ =
MAIL_RECIPIENT =
MAIL_SENDER =
 output_options = outopt
 user_settings = ' '
 IMPORTING
DOCUMENT_OUTPUT_INFO =
 job_output_info = w_return
JOB_OUTPUT_OPTIONS =
 TABLES
 it_zvnpa = it_zvnpa
 it_head = it_head.
 READ TABLE w_return-spoolids INTO wa_line INDEX 1.
 IF sy-subrc = 0.
 lv_spool = wa_line.
 CALL FUNCTION 'CONVERT_OTFSPOOLJOB_2_PDF'
 EXPORTING
 src_spoolid = lv_spool
 no_dialog = ' '
 dst_device = 'LOCL'
 TABLES
 pdf = it_pdf_output
 EXCEPTIONS
 err_no_otf_spooljob = 1
 err_no_spooljob = 2
 err_no_permission = 3
 err_conv_not_possible = 4
 err_bad_dstdevice = 5
 user_cancelled = 6
 err_spoolerror = 7
 err_temseerror = 8
 err_btcjob_open_failed = 9
 err_btcjob_submit_failed = 10
 err_btcjob_close_failed = 11.
 it_otf[] = w_return-otfdata[].
 IF it_otf[] IS NOT INITIAL.
 CALL FUNCTION 'CONVERT_OTF'
 EXPORTING
 format = 'PDF'
 max_linewidth = 132
 IMPORTING
 bin_filesize = binsz
 TABLES
 otf = it_otf
 lines = i_tline.
 LOOP AT i_tline.
 TRANSLATE i_tline USING ' ~'.
 CONCATENATE wa_buffer i_tline INTO wa_buffer.
 ENDLOOP.
 TRANSLATE wa_buffer USING '~ '.
 DO.
 i_record = wa_buffer.
 APPEND i_record.
 SHIFT wa_buffer LEFT BY 255 PLACES.
 IF wa_buffer IS INITIAL.
 EXIT.
 ENDIF.
 ENDDO.
 ENDIF.
 IF i_record[] IS NOT INITIAL.
 it_attach[] = i_record[].
 CALL FUNCTION 'SX_TABLE_LINE_WIDTH_CHANGE'
 EXPORTING
 LINE_WIDTH_SRC = '132'
 LINE_WIDTH_DST = '255'
 TRANSFER_BIN = ' '
 TABLES
 content_in = i_tline[]
 content_out = IT_ATTACH[]
 EXCEPTIONS
 ERR_LINE_WIDTH_SRC_TOO_LONG = 1
 ERR_LINE_WIDTH_DST_TOO_LONG = 2
 ERR_CONV_FAILED = 3
 OTHERS = 4
 IF sy-subrc <> 0.
 MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
 WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
 ENDIF.
 it_attach[] = w_return-otfdata[].
 IF it_pdf_output[] IS NOT INITIAL.
 it_attach[] = it_pdf_output[].
 wa_mailbody-line = 'Dear Sir / Madam,'.
 APPEND wa_mailbody TO it_mailbody.
 wa_mailbody-line = 'Please be informed that we have remitted the payment towards your outstanding bills as per the attachment:'.
 APPEND wa_mailbody TO it_mailbody.
 wa_mailbody-line = ' '.
 APPEND wa_mailbody TO it_mailbody.
 wa_mailbody-line = ' '.
 APPEND wa_mailbody TO it_mailbody.
 wa_mailbody-line = 'Best Regards,'.
 APPEND wa_mailbody TO it_mailbody.
 wa_mailbody-line = 'Mary. G '.
 APPEND wa_mailbody TO it_mailbody.
 wa_mailbody-line = 'Finance department'.
 APPEND wa_mailbody TO it_mailbody.
 wa_mailbody-line = 'Intimate Fashions (I) Pvt Ltd'.
 APPEND wa_mailbody TO it_mailbody.
 wa_mailbody-line = ' '.
 APPEND wa_mailbody TO it_mailbody.
 wa_mailbody-line = 'Please do not print this email unless it is absolutely necessary. Become environment friendly.'.
 APPEND wa_mailbody TO it_mailbody.
 wa_mailbody-line = 'E-MAIL DISCLAIMER.'.
 APPEND wa_mailbody TO it_mailbody.
 wa_mailbody-line = 'If you are not the addressee of this mail, please delete this. Intimate Fashions does not accept any liability on the improper usage of this mail. It may also be legally '.
 APPEND wa_mailbody TO it_mailbody.
 wa_mailbody-line = 'privileged. Internet communications cannot be guaranteed to be timely, secure or virus free'.
 APPEND wa_mailbody TO it_mailbody.
 DESCRIBE TABLE it_mailbody LINES lncnt.
 wa_doc_data-obj_descr = 'Remittance details - Brunet'.
 wa_doc_data-expiry_dat = sy-datum + 10.
 wa_doc_data-obj_name = 'TRIAL'.
 wa_doc_data-sensitivty = 'F'.
 wa_doc_data-doc_size = lncnt * 255.
 CLEAR wa_pack.
 CLEAR wa_pack-transf_bin.
 wa_pack-doc_type = 'RAW'.
 wa_pack-transf_bin = ' '.
 wa_pack-head_start = 1.
 wa_pack-head_num = 0.
 wa_pack-body_start = 1.
 wa_pack-body_num = lncnt.
 wa_pack-doc_size = lncnt * 255.
 APPEND wa_pack TO it_pack.
 CLEAR: lncnt,wa_pack.
 DESCRIBE TABLE it_attach LINES lncnt.
 wa_pack-transf_bin = 'X'.
 wa_pack-head_start = 1.
 wa_pack-head_num = 1.
 wa_pack-body_start = 1.
 wa_pack-body_num = lncnt.
 wa_pack-doc_type = 'PDF'.
 wa_pack-obj_name = 'VNPA'.
 CONCATENATE 'Vendor Payment Advice' '.PDF' INTO wa_pack-obj_descr.
 wa_pack-obj_descr = 'Vendor Payment Advice'.
 READ TABLE it_attach INDEX lncnt. "INTO WA_ATTACH
 wa_pack-doc_size = ( lncnt - 1 ) * 255 + STRLEN( it_attach ).
 wa_pack-doc_size = lncnt * 255.
 APPEND wa_pack TO it_pack.
 CLEAR: lncnt,wa_pack.
 wa_mailhead = 'Vendor Payment Advice'.
 APPEND wa_mailhead TO it_mailhead.
 CLEAR: wa_mailhead.
 LOOP AT pa_mail.
 wa_receiverid-receiver = pa_mail-low.
 wa_receiverid-rec_type = 'U'.
 APPEND wa_receiverid TO it_receiverid.
 CLEAR:wa_receiverid.
 ENDLOOP.
 wa_receiverid-receiver = 'xxxxx'. "(I have given mail id here )
 wa_receiverid-rec_type = 'U'.
 APPEND wa_receiverid TO it_receiverid.
 wa_receiverid-receiver = 'xxxxx'. "(I have given mail id here )
 wa_receiverid-rec_type = 'U'.
 APPEND wa_receiverid TO it_receiverid.
 wa_receiverid-receiver = 'xxxxx'. "(I have given mail id here )
 wa_receiverid-rec_type = 'U'.
 APPEND wa_receiverid TO it_receiverid.
 CLEAR:wa_receiverid,lncnt.
 CALL FUNCTION 'SO_NEW_DOCUMENT_ATT_SEND_API1'
 EXPORTING
 document_data = wa_doc_data
 put_in_outbox = 'X'
 commit_work = 'X'
 IMPORTING
 SENT_TO_ALL =
 NEW_OBJECT_ID =
 TABLES
 packing_list = it_pack
 object_header = it_mailhead
 contents_bin = it_attach[]
 contents_txt = it_mailbody
 CONTENTS_HEX = it_attach
 OBJECT_PARA =
 OBJECT_PARB =
 receivers = it_receiverid
 EXCEPTIONS
 too_many_receivers = 1
 document_not_sent = 2
 document_type_not_exist = 3
 operation_no_authorization = 4
 parameter_error = 5
 x_error = 6
 enqueue_error = 7
 OTHERS = 8.
 IF sy-subrc = 0.
MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
 WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
 LOOP AT it_zvnpa INTO wa_zvnpa.
 wa_zvnpa-flag = 'X'.
 MODIFY it_zvnpa FROM wa_zvnpa TRANSPORTING flag.
 ENDLOOP.
 MODIFY zvnpa FROM TABLE it_zvnpa.
 ENDIF.
 ENDIF.
 CLEAR: wa_zvnpa,it_zvnpa,it_otf,it_otf[],w_return,lncnt,
 wa_doc_data,
 wa_head,it_head,it_head1,
 i_record,i_record[],
 i_tline,i_tline[],
 it_pack,
 wa_pack,
 it_mailhead,
 wa_mailhead,
 it_mailbody,
 wa_mailbody,
 it_receiverid,
 wa_receiverid,
 it_attach.
 ENDAT.
ENDLOOP.
ENDIF.

Scanner to pdf conversion problem

For some unknown reason I recently started having problems with Adobe Acrobat X Pro (version 10.1.4) in converting via the scanner to pdf conversion basic text documents. It used to take a minute or two to convert a basic text document, now it is taking almost a half hour for a basic text one page conversion. Any ideas?

Sorry for the inconvenience caused while scanning. We are actively trying to fix the issue and need help from users like you in narrowing down the fix. I’d request you to do the following when you run into this issue:
• Please send me a private message or e-mail me at [email protected] immediately and I will get back to you within one business day for next steps
• Please take a back-up or copy of any folders or files (e.g. App Data), in case you choose to delete them as a workaround

PDF conversion problem after password change

I am in a loop: having changed password, Adobe insists on new subscription to PDF conversion before converting a document, but will not accept my submission because I already have a subscription with 4 months still to run before renewal. How do I sort this idiot out?

Which subscription service did you purchase? Adobe PDF Pack or ExportPDF?
Could you make sure that you are signed in before converting documents?
Go to the home screen of Adobe Reader for iOS.
Tap My Account in the lower left corner.
Tap the blue Sign In button.
Sign in with your Adobe ID and new password.
(Tap/click the image above to enlarge)
Additionally, please take a look at this FAQ page for account information.
Adobe ID | Sign in | Change email, password, or account information
Please let us know if you need further assistance.

Smartforms o/p 2 PDF conversion problem , plz see my code

Hi Smartform Guys
1)I m getting error "CONVT_NO_NUMBER " in converting my Smartform output to PDF.
*Printing of Export Invoice, Packing List,Enclosure to Packing List & *
*Case Marking in one SMART FORMS Layout *
REPORT ZSD_REP_MULTI_PRINT.
TABLES :
 vbak,
 vbap,
 vbpa,
 vbfa,
 VBRK,
 VBRP,
 LIKP,
 LIPS,
 KONV,
 objk,
 tvko,
 ser01,
 sadr,
 equi,
 makt,
 mast,
 t005t,
 kna1,
 t001w,
 T001,
 ADRC,
 sscrfields,
 zpp_plcmi, "Packing list history For Conf: Item data
 zplh, "PACKING LIST HISTORY : HEADER DATA
 zpli. "PACKING LIST HISTORY : ITEM DATA
DATA: FM_NAME TYPE RS38L_FNAM,
 P_E_DEVTYPE TYPE RSPOPTYPE,
 P_JOB_OUTPUT_INFO TYPE SSFCRESCL OCCURS 2000 WITH HEADER LINE,
 P_OUTPUT_OPTIONS TYPE SSFCOMPOP OCCURS 0 WITH HEADER LINE,
 P_CONTROL_PARAMETERS TYPE SSFCTRLOP OCCURS 0 WITH HEADER LINE ,
 P_DOC LIKE DOCS OCCURS 2000 WITH HEADER LINE,
 P_LINES LIKE TLINE OCCURS 200,
 P_BIN_FILESIZE TYPE I,
 P_LANGUAGE TYPE SFLANGU,
 P_BIN_FILE TYPE XSTRING.
DATA: T_ITEM TYPE ZSD_TABL_LITEM,
 WA_ITEM TYPE ZSD_STRUCT_LITEM,
 T_ADRS LIKE ZSD_STRUCT_ADRS OCCURS 0 WITH HEADER LINE,
 MSLINES LIKE TLINE OCCURS 1 WITH HEADER LINE,
 TIDNO LIKE STXL-TDID,
 TNAME LIKE STXL-TDNAME,
 TOBJT LIKE STXL-TDOBJECT,
 SSORD LIKE VBAK-VBELN,
 TOT LIKE VBAK-NETWR,
 WORD LIKE SPELL.
SELECTION-SCREEN BEGIN OF BLOCK blk1 WITH FRAME TITLE text-001.
PARAMETERS: P_DELNO LIKE LIKP-VBELN OBLIGATORY,
 P_INVNO LIKE VBRK-VBELN OBLIGATORY,
 P_DATE LIKE SY-DATUM.
SELECTION-SCREEN END OF BLOCK blk1.
AT SELECTION-SCREEN.
CLEAR T_ADRS.
REFRESH T_ITEM.
T_ADRS-INVNO = P_INVNO.
T_ADRS-INVDAT = P_DATE.
SELECT SINGLE VBELV INTO VBFA-VBELV
 FROM VBFA
 WHERE VBELN = P_DELNO
 AND VBTYP_N = 'J' .
SSORD = VBFA-VBELV.
*Exporter's Address
SELECT SINGLE BUKRS_VF INTO VBAK-BUKRS_VF
 FROM VBAK
 WHERE VBELN = VBFA-VBELV.
SELECT SINGLE ADRNR
 INTO T001-ADRNR
 FROM T001
 WHERE BUKRS = VBAK-BUKRS_VF.
SELECT SINGLE NAME1 STREET CITY1 POST_CODE1 COUNTRY
 INTO (T_ADRS-NAME1,T_ADRS-STREET,T_ADRS-CITY1,
 T_ADRS-POST_CODE1, ADRC-COUNTRY)
 FROM ADRC
 WHERE ADDRNUMBER EQ T001-ADRNR.
SELECT SINGLE LANDX
 INTO T_ADRS-COUNTRY
 FROM T005T
 WHERE SPRAS = 'EN'
 AND LAND1 = ADRC-COUNTRY.
**BUYERS NO & DATE
SELECT SINGLE BSTNK BSTDK INTO (T_ADRS-BSTNK,T_ADRS-BSTDK)
 FROM VBAK
 WHERE VBELN = VBFA-VBELV.
*Consignee Address & Buyer Other Than Consignee
SELECT SINGLE KUNNR KUNAG INTO (LIKP-KUNNR, LIKP-KUNAG)
 FROM LIKP WHERE VBELN = P_DELNO.
IF LIKP-KUNNR = LIKP-KUNAG.
 SELECT SINGLE NAME1 NAME2 STRAS ORT01 PSTLZ REGIO TELF1 ADRNR
 INTO (T_ADRS-CNAME1, T_ADRS-CNAME2, T_ADRS-CSTREET,
 T_ADRS-CCITY, T_ADRS-CPCODE, T_ADRS-CREGIO,
 T_ADRS-CTELF1, KNA1-ADRNR)
 FROM KNA1
 WHERE KUNNR = LIKP-KUNNR.
 SELECT SINGLE COUNTRY INTO ADRC-COUNTRY
 FROM ADRC
 WHERE ADDRNUMBER EQ KNA1-ADRNR.
 SELECT SINGLE LANDX
 INTO T_ADRS-CCOUNTRY
 FROM T005T
 WHERE SPRAS = 'EN'
 AND LAND1 = ADRC-COUNTRY.
 T_ADRS-ONAME1 = T_ADRS-CNAME1 .
 T_ADRS-ONAME2 = T_ADRS-CNAME2 .
 T_ADRS-OSTREET = T_ADRS-CSTREET .
 T_ADRS-OCITY = T_ADRS-CCITY.
 T_ADRS-OPCODE = T_ADRS-CPCODE .
 T_ADRS-OREGIO = T_ADRS-CREGIO.
 T_ADRS-OTELF1 = T_ADRS-CTELF1 .
 T_ADRS-OCOUNTRY = T_ADRS-CCOUNTRY.
ELSE.
 SELECT SINGLE NAME1 NAME2 STRAS ORT01 PSTLZ REGIO TELF1 ADRNR
 INTO (T_ADRS-CNAME1, T_ADRS-CNAME2, T_ADRS-CSTREET,
 T_ADRS-CCITY, T_ADRS-CPCODE, T_ADRS-CREGIO,
 T_ADRS-CTELF1, KNA1-ADRNR)
 FROM KNA1
 WHERE KUNNR = LIKP-KUNNR.
 SELECT SINGLE COUNTRY INTO ADRC-COUNTRY
 FROM ADRC
 WHERE ADDRNUMBER EQ KNA1-ADRNR.
 SELECT SINGLE LANDX
 INTO T_ADRS-CCOUNTRY
 FROM T005T
 WHERE SPRAS = 'EN'
 AND LAND1 = ADRC-COUNTRY.
*Buyer Other than Consignee
 SELECT SINGLE NAME1 NAME2 STRAS ORT01 PSTLZ REGIO TELF1 ADRNR
 INTO (T_ADRS-ONAME1, T_ADRS-ONAME2, T_ADRS-OSTREET,
 T_ADRS-OCITY, T_ADRS-OPCODE, T_ADRS-OREGIO,
 T_ADRS-OTELF1, KNA1-ADRNR)
 FROM KNA1
 WHERE KUNNR = LIKP-KUNAG.
 SELECT SINGLE COUNTRY INTO ADRC-COUNTRY
 FROM ADRC
 WHERE ADDRNUMBER EQ KNA1-ADRNR.
 SELECT SINGLE LANDX
 INTO T_ADRS-OCOUNTRY
 FROM T005T
 WHERE SPRAS = 'EN'
 AND LAND1 = ADRC-COUNTRY.
ENDIF.
*Other's Ref
TIDNO = 'Z071'.
TNAME = SSORD.
TOBJT = 'VBBK'.
PERFORM FINDTEXT.
LOOP AT MSLINES.
 T_ADRS-OREF = mslines-tdline(25).
 EXIT.
ENDLOOP.
*Buyer's Order No Ref
TIDNO = 'Z023'.
TNAME = SSORD.
TOBJT = 'VBBK'.
PERFORM FINDTEXT.
LOOP AT MSLINES.
 T_ADRS-BUYER = mslines-tdline(25).
 EXIT.
ENDLOOP.
*Exporter Ref
TIDNO = 'Z072'.
TNAME = SSORD.
TOBJT = 'VBBK'.
PERFORM FINDTEXT.
LOOP AT MSLINES.
 T_ADRS-XPREF = mslines-tdline(25).
 EXIT.
ENDLOOP.
*Pre-Carraige By
TIDNO = 'Z074'.
TNAME = SSORD.
TOBJT = 'VBBK'.
PERFORM FINDTEXT.
LOOP AT MSLINES.
 T_ADRS-PCRG = mslines-tdline(25).
 EXIT.
ENDLOOP.
*Place Of reciept by Pre-Carraige
TIDNO = 'Z073'.
TNAME = SSORD.
TOBJT = 'VBBK'.
PERFORM FINDTEXT.
LOOP AT MSLINES.
 T_ADRS-PLPCRG = mslines-tdline(25).
 EXIT.
ENDLOOP.
*Vessel/Flight No
TIDNO = 'Z075'.
TNAME = SSORD.
TOBJT = 'VBBK'.
PERFORM FINDTEXT.
LOOP AT MSLINES.
 T_ADRS-VFNO = mslines-tdline(25).
 EXIT.
ENDLOOP.
*Port Of Loading
TIDNO = 'Z077'.
TNAME = SSORD.
TOBJT = 'VBBK'.
PERFORM FINDTEXT.
LOOP AT MSLINES.
 T_ADRS-PLOAD = mslines-tdline(25).
 EXIT.
ENDLOOP.
*Port Of Discharge
TIDNO = 'Z076'.
TNAME = SSORD.
TOBJT = 'VBBK'.
PERFORM FINDTEXT.
LOOP AT MSLINES.
 T_ADRS-PDISG = mslines-tdline(25).
 EXIT.
ENDLOOP.
*Final Destination
TIDNO = 'Z070'.
TNAME = SSORD.
TOBJT = 'VBBK'.
PERFORM FINDTEXT.
LOOP AT MSLINES.
 T_ADRS-FDEST = mslines-tdline(25).
 EXIT.
ENDLOOP.
*Terms Of Delivery & Payment
TIDNO = 'Z080'.
TNAME = SSORD.
TOBJT = 'VBBK'.
PERFORM FINDTEXT.
LOOP AT MSLINES.
 T_ADRS-TERMS = mslines-tdline(50).
 EXIT.
ENDLOOP.
APPEND T_ADRS.
*BODY SECTION FOR LINE ITEMS
SELECT POSNR KWMENG VRKME WAERK
 INTO (VBAP-POSNR, VBAP-KWMENG, VBAP-VRKME, VBAP-WAERK)
 FROM VBAP
 WHERE VBELN = SSORD.
*Mark/Case No
 TIDNO = '0002'.
 CONCATENATE SSORD
 VBAP-POSNR
 INTO TNAME.
 TOBJT = 'VBBP'.
 PERFORM FINDTEXT.
 LOOP AT MSLINES.
 WA_ITEM-MARKNO = mslines-tdline(40).
 EXIT.
 ENDLOOP.
*Packing Type
 TIDNO = '0003'.
 CONCATENATE SSORD
 VBAP-POSNR
 INTO TNAME.
 TOBJT = 'VBBP'.
 PERFORM FINDTEXT.
 LOOP AT MSLINES.
 WA_ITEM-PACKTYP = mslines-tdline(40).
 EXIT.
 ENDLOOP.
*Goods Description
 TIDNO = '0001'.
 CONCATENATE SSORD
 VBAP-POSNR
 INTO TNAME.
 TOBJT = 'VBBP'.
 PERFORM FINDTEXT.
 LOOP AT MSLINES.
 WA_ITEM-PACKTYP = mslines-tdline(40).
 EXIT.
 ENDLOOP.
*Goods Quantity
 WA_ITEM-QTY = VBAP-KWMENG.
 WA_ITEM-VRKME = VBAP-VRKME.
*Goods Rate
 SELECT SINGLE KNUMV INTO VBAK-KNUMV FROM VBAK WHERE VBELN = SSORD.
 SELECT SINGLE KBETR WAERS
 INTO (WA_ITEM-RATE, WA_ITEM-WAERS)
 FROM KONV
 WHERE KNUMV = VBAK-KNUMV
 AND KPOSN = VBAP-POSNR
 AND KSCHL = 'PR00'.
*Goods Amount
 WA_ITEM-AMOUNT = WA_ITEM-QTY * WA_ITEM-RATE.
 WA_ITEM-WAERK = VBAP-WAERK.
 TOT = TOT + WA_ITEM-AMOUNT.
 APPEND WA_ITEM TO T_ITEM.
ENDSELECT.
T_ADRS-TOT = TOT.
CALL FUNCTION 'SPELL_AMOUNT'
 EXPORTING
 AMOUNT = TOT
 CURRENCY = VBAP-WAERK
FILLER = ' '
 LANGUAGE = SY-LANGU
 IMPORTING
 IN_WORDS = WORD
 EXCEPTIONS
 NOT_FOUND = 1
 TOO_LARGE = 2
 OTHERS = 3
IF SY-SUBRC <> 0.
MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
 WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
ENDIF.
TEXT = WORD-WORD.
CONCATENATE TEXT
 'DECIMAL'
 WORD-WORD
 INTO TEXT
 SEPARATED BY ' '.
T_ADRS-TOT_WORDS = WORD-WORD.
APPEND T_ADRS.
START-OF-SELECTION.
CALL FUNCTION 'SSF_FUNCTION_MODULE_NAME'
 EXPORTING
 FORMNAME = 'Z_SD_REP_MULTI_PRINT'
VARIANT = ' '
DIRECT_CALL = ' '
 IMPORTING
 FM_NAME = FM_NAME
EXCEPTIONS
 NO_FORM = 1
 NO_FUNCTION_MODULE = 2
 OTHERS = 3
IF SY-SUBRC <> 0.
 MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
 WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
ENDIF.
P_LANGUAGE = 'EN'.
CALL FUNCTION 'SSF_GET_DEVICE_TYPE'
 EXPORTING
 I_LANGUAGE = P_LANGUAGE
 I_APPLICATION = 'SAPDEFAULT'
 IMPORTING
 E_DEVTYPE = P_E_DEVTYPE.
P_OUTPUT_OPTIONS-XSFCMODE = 'X'.
P_OUTPUT_OPTIONS-XSF = SPACE.
P_OUTPUT_OPTIONS-XDFCMODE = 'X'.
P_OUTPUT_OPTIONS-XDF = SPACE.
P_OUTPUT_OPTIONS-TDPRINTER = P_E_DEVTYPE.
P_OUTPUT_OPTIONS-TDDEST = 'LOCL'.
APPEND P_OUTPUT_OPTIONS.
P_CONTROL_PARAMETERS-NO_DIALOG = 'X'.
P_CONTROL_PARAMETERS-GETOTF = 'X'.
P_CONTROL_PARAMETERS-NO_CLOSE = SPACE.
APPEND P_CONTROL_PARAMETERS.
CALL FUNCTION FM_NAME
 EXPORTING
ARCHIVE_INDEX =
ARCHIVE_INDEX_TAB =
ARCHIVE_PARAMETERS =
 CONTROL_PARAMETERS = P_CONTROL_PARAMETERS
MAIL_APPL_OBJ =
MAIL_RECIPIENT =
MAIL_SENDER =
 OUTPUT_OPTIONS = P_OUTPUT_OPTIONS
 USER_SETTINGS = 'X'
IMPORTING
DOCUMENT_OUTPUT_INFO =
 JOB_OUTPUT_INFO = P_JOB_OUTPUT_INFO
JOB_OUTPUT_OPTIONS =
TABLES
 T_ADRS = T_ADRS
 T_ITEM = T_ITEM
EXCEPTIONS
 FORMATTING_ERROR = 1
 INTERNAL_ERROR = 2
 SEND_ERROR = 3
 USER_CANCELED = 4
 OTHERS = 5
IF SY-SUBRC <> 0.
 MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
 WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
ENDIF.
P_OTF[] = P_JOB_OUTPUT_INFO-OTFDATA.
CALL FUNCTION 'CONVERT_OTF_2_PDF'
EXPORTING
 USE_OTF_MC_CMD = 'X'
ARCHIVE_INDEX =
IMPORTING
 BIN_FILESIZE = P_BIN_FILESIZE
TABLES
 OTF = P_JOB_OUTPUT_INFO-OTFDATA
 DOCTAB_ARCHIVE = P_DOC
 LINES = P_LINES
EXCEPTIONS
 ERR_CONV_NOT_POSSIBLE = 1
 ERR_OTF_MC_NOENDMARKER = 2
 OTHERS = 3.
IF SY-SUBRC <> 0.
MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
 WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
ENDIF.
BREAK-POINT.
CALL FUNCTION 'WS_DOWNLOAD'
EXPORTING
 BIN_FILESIZE = P_BIN_FILESIZE
CODEPAGE = ' '
 FILENAME = 'C:\TEMP.PDF'
 FILETYPE = 'BIN'
 MODE = ''
WK1_N_FORMAT = ' '
WK1_N_SIZE = ' '
WK1_T_FORMAT = ' '
WK1_T_SIZE = ' '
COL_SELECT = ' '
COL_SELECTMASK = ' '
NO_AUTH_CHECK = ' '
IMPORTING
 FILELENGTH = P_BIN_FILESIZE
TABLES
 DATA_TAB = P_LINES
FIELDNAMES =
EXCEPTIONS
FILE_OPEN_ERROR = 1
FILE_WRITE_ERROR = 2
INVALID_FILESIZE = 3
INVALID_TYPE = 4
NO_BATCH = 5
UNKNOWN_ERROR = 6
INVALID_TABLE_WIDTH = 7
GUI_REFUSE_FILETRANSFER = 8
CUSTOMER_ERROR = 9
NO_AUTHORITY = 10
OTHERS = 11
IF SY-SUBRC <> 0.
MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
 WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
ENDIF.
CALL FUNCTION 'GUI_DOWNLOAD'
 EXPORTING
 BIN_FILESIZE = P_BIN_FILESIZE
 FILENAME = 'C:\Documents and Settings\pvipin\Desktop\sd.pdf'
 FILETYPE = 'BIN'
APPEND = ' '
WRITE_FIELD_SEPARATOR = ' '
HEADER = '00'
TRUNC_TRAILING_BLANKS = ' '
WRITE_LF = 'X'
COL_SELECT = ' '
COL_SELECT_MASK = ' '
DAT_MODE = ' '
CONFIRM_OVERWRITE = ' '
NO_AUTH_CHECK = ' '
CODEPAGE = ' '
IGNORE_CERR = ABAP_TRUE
REPLACEMENT = '#'
WRITE_BOM = ' '
TRUNC_TRAILING_BLANKS_EOL = 'X'
IMPORTING
FILELENGTH =
*TABLES
 DATA_TAB = P_LINES.
FIELDNAMES =
**EXCEPTIONS
FILE_WRITE_ERROR = 1
NO_BATCH = 2
GUI_REFUSE_FILETRANSFER = 3
INVALID_TYPE = 4
NO_AUTHORITY = 5
UNKNOWN_ERROR = 6
HEADER_NOT_ALLOWED = 7
SEPARATOR_NOT_ALLOWED = 8
FILESIZE_NOT_ALLOWED = 9
HEADER_TOO_LONG = 10
DP_ERROR_CREATE = 11
DP_ERROR_SEND = 12
DP_ERROR_WRITE = 13
UNKNOWN_DP_ERROR = 14
ACCESS_DENIED = 15
DP_OUT_OF_MEMORY = 16
DISK_FULL = 17
DP_TIMEOUT = 18
FILE_NOT_FOUND = 19
DATAPROVIDER_EXCEPTION = 20
CONTROL_FLUSH_ERROR = 21
OTHERS = 22 .
IF SY-SUBRC <> 0.
 MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
 WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
ENDIF.
*& Form FINDTEXT
 text
FORM FINDTEXT.
REFRESH mslines.
CALL FUNCTION 'READ_TEXT'
 EXPORTING
 client = sy-mandt
 id = tidno
 language = sy-langu
 name = tname
 object = tobjt
 TABLES
 lines = mslines
 EXCEPTIONS
 id = 1
 language = 2
 name = 3
 not_found = 4
 object = 5
 reference_check = 6
 wrong_access_to_archive = 7
 OTHERS = 8.
DELETE mslines WHERE tdline IS INITIAL.
ENDFORM. "FINDTEXTThnx in Advnce
Moni
Message was edited by: md monirujjaman
Message was edited by: md monirujjaman
Message was edited by: md monirujjaman
Message was edited by: md monirujjaman
Message was edited by: md monirujjaman
Message was edited by: md monirujjaman
Message was edited by: md monirujjaman
Message was edited by: md monirujjaman
Message was edited by: md monirujjaman

Hello,
I think the following statement is causing problem.
P_OTF[] = P_JOB_OUTPUT_INFO-OTFDATA.
either give:
P_OTF[] = P_JOB_OUTPUT_INFO-OTFDATA[].
or
directly pass P_JOB_OUTPUT_INFO-OTFDATA into FM parameter.
This is because you are filling only header into P_OTF and NOT the Contents of internal table by the statement
P_OTF[] = P_JOB_OUTPUT_INFO-OTFDATA.
let me know whether it works.
Regards, Murugesh AS
have alook at this thread:
Re: SX_OBJECT_CONVERT_OTF_PDF
this may help you
Message was edited by: Murugesh Arcot
Message was edited by: Murugesh Arcot

Smartforms to PDF conversion problem

Hi experts,
I have a fix that requires to send an email with a smartform as a pdf attachment. i was able to send the email with attachment but as i open the pdf file an error ''There was an error while opening a document. The file is damaged and file could not be repaired.' or 'Adobe could not open *.pdf because it is either not supported file type or because the file has been damaged (for example, it was sent as an email attachment and wasn't correctly decoded).
I already debug my program and what i saw from my OTFDATA that is being returned by the smartform are chinese characters and boxes instead of hashes,alpa characters and etc (please note that my SF does not use any chinese script). I think that the error is due this.
Has anyone encountered this type of problem? Please help.
Also please note that this fix is migrated from a non-unicode dev box to a unicode system dev box
Thanks in advance.

hi tanmoy,
i have installed the foxit reader and yet the error is still there. I believe that the error is coming from the otfdata that my smartform is generating.
As an added information. My program is a Copy from another development box (BOX NA). When i run the program in BOX NA the code works fine and an email is sent to me, but on the dev box i am working right now it does not work fine.
The program in the dev box is a the migrated version of the program in BOX NA.

HTML to PDF conversion problem

Using Adobe Acrobat Pro X, I am having a problem converting HTML to interactive PDF, all of the HTML does not convert to the PDF. My HTML code creates "tabbed" data when displayed via a browser.
I have had success with converting one very LARGE tabbed, HTML file to PDF, but most will only convert the data on the 1st "tab". Not sure what makes the other files different. Please can anyone help?
Thanks,
Shalayne

Shgreen3,
Moving this to Acrobat forum, since this doesn't relate to our CreatePDF service.
Dave

Word to PDF conversion problems

When I create a PDF from a Word document, several files are generated (instead of one) before and after landscape pages within a large document. How can I avoid this so that only one PDF is generated? I get an error saying that the footers are outside the printable area, however, I don't have any problems physically printing the document and the print preview looks fine.

One way would be to use Apple's way (instead of Microsoft's way) of creating a PDF file from Microsoft Word.
Try creating it this way:
While in Microsoft Word, when ready to create a PDF, go to File > Print and instead of printing, click the "PDF" button in the lower left, then click "Save as PDF" from the resulting dropdown.

PDF conversion problem with AutoVue 2D Professional 20.2.2. on Windows 2012R2

I recently installed AutoVue 2D Professional 20.2.2. (30 day trial) on Windows 2012R2 terminal server as a customer demo.
When trying to export a drawing to PDF (Menu: File/Convert), immediately after pressing OK I receive the following error message:
Print driver host for applications
Print driver host for applications has stopped working
Windows can check online for a solution to the problem.
Problem signature:
Problem Event Name: APPCRASH
Application Name: splwow64.exe
Application Version: 6.3.9600.16384
Application Timestamp: 5215f01d
Fault Module Name: GDI32.dll
Fault Module Version: 6.3.9600.17246
Fault Module Timestamp: 53dc692a
Exception Code: c0000005
Exception Offset: 00000000000a922a
OS Version: 6.3.9600.2.0.0.16.7
Locale ID: 1033
Additional Information 1: b450
Additional Information 2: b4507c1c540710cc27a93518f693c849
Additional Information 3: 4bdb
Additional Information 4: 4bdb1ca1e3287a14667b2f708d05ca86
When doing a web search for similar errors I find some particular versions of Adobe Reader and some HP printer drivers which caused this problem in the past.
The advice of Adobe and HP was to update their software.
This leads me to the opinion that this could rather be a problem of AutoVUE than Windows Server 2012.
Has anyone else seen this behaviour?
Does anyone know how to fix this error?
Any help appreciated.
Martin

2012 Is not a certified platform for AutoVue, please read the documentation and install AutoVue on a certified platform
If you require more information on specific support for a new platform, please contact your sales representative for a timeline for the official support ie update version of the broken functionality
2012 modified the way drivers are to be implemented and previous versions are no longer compatible.

Acrobat 7.0 Pro Excel to pdf conversion problem

I have a multiple page excel document with specific data on specific pages, basically making slides within excel. When it prints to a printer, all is well and each page prints as it should. However, when I convert it to pdf for distribution, it seems like the pages shrink and I get data from page 3 on the bottom of page 2, data from page 4 on the bottom of page 3, and so on until a few pages later, I have a page with the bottom half of one slide, and the top half of another. Has anyone ever ran into this problem, or can anyone help find a solution? Thanks!!
Eric

Two parts of AA 7 will not install on Win 7 (32 or 64-bit): the Adobe PDF printer and AcroTray.exe. You can install a separate color PS printer (either one from Adobe or possibly one for an HP color PS printer), change the name to Adobe PDF and change the port to FILE. That should do the job, but you will ALWAYS have an extra step in the creation of a PDF. You will have to print to the printer and a PS file will be created (probably with a PRN extension). You then have to open that file in Distiller to create a PDF. From my brief testing, this process will work and the rest of Acrobat and Distiller seem to work (though I did not test extensively). If this is unacceptable to you, then purchase AA XI (upgrade not available from AA 7).

Swf to pdf conversion problem

Don't really know if this is the best forum for this, but....
I have a few flash files (swf) which play perfectly well in
Flash Player, in the browser, anywhere you like!
I've recently been trying to convert these (with Pro 8) to
pdf files, and the process seems to complete successfully.
These new pdf files open and run well on my own PC, but after
sending a few to another PC, the viewer gets the following warning
- "'cannot play media clip because there is no player available
that can play the media while satisfying the authors intention as
well as your security settings'."
I've checked the settings inside Multimedia, Multi Trust and
Trust Manager but cannot see anything wrong.
Can anyone help out with suggestions, please?!
Thanks in advance....

Upload the PDF files somewhere and we'll take a look for you.
Regards
FlashJester Support Team
e. - [email protected]
w. - www.flashjester.com
"This has been one of the most impressive and thoroughly
pleasant
experiences of customer support I have ever come across -
astounding!"
Director - hedgeapple

MS Word 2007 to PDF Conversion problem links & bookmarks

I have a 200 page MS Word 2007 document in which I added hyperlinks to jump to embedded bookmarks within the document. I choose Save As --> PDF to convert the document. Once the document is converted, some of my links work perfect (I can click on any part of the underlined word) and half of the links only allow me to click on the white space preceding the link and the previous word. Further, words that start a line of text always work. Words that are within a paragraph force me to use the white space to the left of the word.
Please reference the example below:
The first "Nick" below would work perfectly (i.e. I could click on any part of the word) and it would jump to the bookmark.
The second reference to "Nick" will only be clickable in the space between "that" and "Nick" on the second line.
The first "Sally" in line one will "look linked" but I am only able to click on the blank space between "that" and "Sally".
The second "Sally" will work at anypoint in the word because it starts a line.
Ely will only be clickable between the "." and "Ely".
I have tried to save the document in every possible combination of settings.
Thanks for the help.
EXAMPLE: I would like to click on a persons name and have it jump to the end of the document where I have placed the biographies.
Nick is going to the store because he believes that Sally will be there
when he is back. Ely thinks that Nick is really not a good person, but
Sally thinks otherwise.

Are you using "Adobe PDF" or "PDF or XPS?" I sounds like "Adobe PDF," but trying to be sure. Have you updated your Acrobat to the latest version? If not, try that.

Layout problem in PDF conversion

Hi all,
i am downloading spool data using the function module CONVERT_ABAPSPOOLJOB_2_PDF. But i am facing layout problem. e.g. RFBILA00(financial statement generation program) has written balancesheet data to the spool. This spool data has some 6 columns. but CONVERT_ABAPSPOOLJOB_2_PDF is writing only first 3 columns to the generated PDF file. i used 'GET_PRINT_PARAMETERS' function module also with values like layout as 'X_65_132' and 'X_90_120'. but no success. if anybody knows the answer, please let me know.
Thanks in advance,
Naveen

Hi All,
i am following the below approach to download the information from spool.
program/spool output is an ALV List output data having 8 columns. but below approach is converting only first 5 columns in to PDF format. other 3 columns are getting truncated.
FUNCTION /ngl/download_spoolinfo_as_pdf.
""Local Interface:
*" IMPORTING
*"     REFERENCE(I_SPOOL_REQUEST) LIKE TSP01-RQIDENT
*"     REFERENCE(I_FILENAME) LIKE RLGRAP-FILENAME
*" EXCEPTIONS
*"      DOWNLOAD_ERROR
TABLES tsp01.
DATA: mtab_pdf LIKE tline OCCURS 0 WITH HEADER LINE,
        mc_filename LIKE rlgrap-filename.
DATA: mstr_print_parms LIKE pri_params,
        mc_valid(1) TYPE c,
        mi_bytecount TYPE i.
CALL FUNCTION 'GET_PRINT_PARAMETERS'
    EXPORTING
      copies                 = '1'
      cover_page             = space
      destination            = 'locl'
      expiration             = '1'
      immediately            = space
      mode                   = space
      new_list_id            = 'X'
      no_dialog              = 'X'
      user                   = sy-uname
      line_size              = 200
      line_count             = 65
     layout                 = 'X_65_200'
      layout                 = 'X_90_120'
      sap_cover_page         = 'X'
    IMPORTING
      out_parameters         = mstr_print_parms
      valid                  = mc_valid
    EXCEPTIONS
      archive_info_not_found = 1
      invalid_print_params   = 2
      invalid_archive_params = 3
      OTHERS                 = 4.
IF sy-subrc EQ 0.
    CALL FUNCTION 'CONVERT_ABAPSPOOLJOB_2_PDF'
      EXPORTING
        src_spoolid              = i_spool_request
        no_dialog                = 'X'
        dst_device               = mstr_print_parms-pdest
      IMPORTING
        pdf_bytecount            = mi_bytecount
      TABLES
        pdf                      = mtab_pdf
      EXCEPTIONS
        err_no_abap_spooljob     = 1
        err_no_spooljob          = 2
        err_no_permission        = 3
        err_conv_not_possible    = 4
        err_bad_destdevice       = 5
        user_cancelled           = 6
        err_spoolerror           = 7
        err_temseerror           = 8
        err_btcjob_open_failed   = 9
        err_btcjob_submit_failed = 10
        err_btcjob_close_failed = 11
        OTHERS                   = 12.
    IF sy-subrc EQ 0.
      mc_filename = i_filename.
      DATA: lv_filename TYPE string.
      lv_filename = i_filename.
      CALL FUNCTION 'GUI_DOWNLOAD'
        EXPORTING
          bin_filesize = mi_bytecount
          filename     = lv_filename
          filetype     = 'BIN'
        TABLES
          data_tab     = mtab_pdf
        EXCEPTIONS
          OTHERS       = 22.
      IF sy-subrc EQ 0.
        WRITE:/ mc_filename, 'CONVERTED TO PDF AND DOWNLOADED'.
      ELSE.
        WRITE:/ 'PROBLEM WITH DOWNLOAD'.
        RAISE download_error.
      ENDIF.
    ELSE.
      WRITE:/ 'PROBLEM WITH PDF CONVERSION'.
      RAISE download_error.
    ENDIF.
ELSE.
    WRITE:/ 'PROBLEM GETTING PRINT PARAMETERS'.
    RAISE download_error.
ENDIF.
ENDFUNCTION.

ALV to PDF conversion problem

Similar Messages

Maybe you are looking for