Alv with two internal tables

I have two separate internal tables. However , they have a common field matnr. In the report output, the two internal tables should be joined by this common field. Can this be done with an ALV . The common field Matnr should appear to the extreme left. Followed by itab1 and then itab2 . Its in a sense Matnr is the header , but it shows as rows. Each matnr has several item in both itab1 and itab2 , it is not necessary that total number of item data in itab1 and itab2 will be same .

You can see example program :
TYPE-POOLS: slis.
DATA: BEGIN OF itab OCCURS 0,
        vbeln TYPE vbeln,
        expand,
      END OF itab.
DATA: BEGIN OF itab1 OCCURS 0,
        vbeln TYPE vbeln,
        posnr TYPE posnr,
        matnr TYPE matnr,
        netpr TYPE netpr,
      END OF itab1.
DATA: t_fieldcatalog TYPE slis_t_fieldcat_alv.
DATA: s_fieldcatalog TYPE slis_fieldcat_alv.
s_fieldcatalog-col_pos = '1'.
s_fieldcatalog-fieldname = 'VBELN'.
s_fieldcatalog-tabname   = 'ITAB'.
s_fieldcatalog-rollname = 'VBELN'.
s_fieldcatalog-outputlen = '12'.
APPEND s_fieldcatalog TO t_fieldcatalog.
CLEAR: s_fieldcatalog.
s_fieldcatalog-col_pos = '1'.
s_fieldcatalog-fieldname = 'VBELN'.
s_fieldcatalog-tabname   = 'ITAB1'.
s_fieldcatalog-rollname = 'VBELN'.
s_fieldcatalog-outputlen = '12'.
APPEND s_fieldcatalog TO t_fieldcatalog.
CLEAR: s_fieldcatalog.
s_fieldcatalog-col_pos = '2'.
s_fieldcatalog-fieldname = 'POSNR'.
s_fieldcatalog-tabname   = 'ITAB1'.
s_fieldcatalog-rollname = 'POSNR'.
APPEND s_fieldcatalog TO t_fieldcatalog.
CLEAR: s_fieldcatalog.
s_fieldcatalog-col_pos = '3'.
s_fieldcatalog-fieldname = 'MATNR'.
s_fieldcatalog-tabname   = 'ITAB1'.
s_fieldcatalog-rollname = 'MATNR'.
APPEND s_fieldcatalog TO t_fieldcatalog.
CLEAR: s_fieldcatalog.
s_fieldcatalog-col_pos = '4'.
s_fieldcatalog-fieldname = 'NETPR'.
s_fieldcatalog-tabname   = 'ITAB1'.
s_fieldcatalog-rollname = 'NETPR'.
s_fieldcatalog-do_sum    = 'X'.
APPEND s_fieldcatalog TO t_fieldcatalog.
CLEAR: s_fieldcatalog.
DATA: s_layout TYPE slis_layout_alv.
s_layout-subtotals_text            = 'SUBTOTAL TEXT'.
s_layout-key_hotspot = 'X'.
s_layout-expand_fieldname = 'EXPAND'.
SELECT vbeln UP TO 100 ROWS
       FROM
       vbak
       INTO TABLE itab.
IF NOT itab[] IS INITIAL.
SELECT vbeln posnr matnr netpr
         FROM vbap
         INTO TABLE itab1
         FOR ALL ENTRIES IN itab
         WHERE vbeln = itab-vbeln.
ENDIF.
DATA: v_repid TYPE syrepid.
v_repid = sy-repid.
DATA: s_keyinfo TYPE slis_keyinfo_alv.
s_keyinfo-header01 = 'VBELN'.
s_keyinfo-item01   = 'VBELN'.
CALL FUNCTION 'REUSE_ALV_HIERSEQ_LIST_DISPLAY'
     EXPORTING
          i_callback_program = v_repid
          is_layout          = s_layout
          it_fieldcat        = t_fieldcatalog
          i_tabname_header   = 'ITAB'
          i_tabname_item     = 'ITAB1'
          is_keyinfo         = s_keyinfo
     TABLES
          t_outtab_header    = itab
          t_outtab_item      = itab1
     EXCEPTIONS
          program_error      = 1
          OTHERS             = 2.
IF sy-subrc <> 0.
MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
        WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
ENDIF.
Thanks
Seshu

Similar Messages

Get the Common from Two Internal Tables with same structure

Hi ,
I need to get the Common data from Two Internal Tables with same structure with using the looping method.
For e.g.
I have two internal table say ITAB1 and ITAB2.
ITAB1 has values A,B,C,D,E,F
ITAB2 has values A,H,B,Y,O
Output at runtime should be : A,B

Hi mohit,
1. If u want to compare all fields,
   for matching purpose,
   then we can do like this.
2.
report abc.
data : a like t001 occurs 0 with header line.
data : b like t001 occurs 0 with header line.
loop at a.
LOOP AT B.
    IF A = B.
      WRITE :/ 'SAME'.
    ENDIF.
endloop.
ENDLOOP.
regards,
amit m.

Can we get the data from two internal tables in ALV.

hi friends i would like to display the data using two internal tables using alv grid.please guide me.

Hi,
ALV would be having a specific layout say :
MATNR
MAKTX
QTY
Now, if you have two internal tables, then do they have a different structure. If they have different structures, then what kind of ALV layout you expect. The ALV output should be as per the structure of 1st or 2nd internal table.
If both internal table have same layout, then populate the data from 2nd internal table into 1st internal table and pass the 1st internal table ( it will have data of both internal tables) to ALV.
Best regards,
Prashant

Two internal tables with different structures

Hi Experts,
I Have two internal tables.
Table 1 structure:
Name
Age
Table 2 structure :
Name
age
branch
Now the table 1 has some 5 data's and table 2 is empty.
First i want to move that 5 data's from table 1 to table 2.
Then the branch field is same for all records. its stored in a separate field called 'Branch'.
finallay i need to move that branch to internal table 2 for all records.
So the Table 2 should has five records and each record should have the branch.Its like,
Name Age Branch
name1 10 ECE
name2 10 ECE
I didnt use with header line for both tables. In function module i declared as table parameter.
Please give me a logic.
Helps will be appreciated.

Since the structure of yur both internal table is different so you can't use ITAB1[] = ITAB2[] statements.
In this case you have to loop on first table then move data into second table and appned data into second table.
Declare work area for both table with like line of statement as follows
data: wa_itab1 like line of itab1,
wa_itab2 like line of itab2.
Loop at ita1 into wa_itab1.
wa_itab2-name = wa_itab1-name.
wa_itab2-age = wa_itab1-age.
wa_itab2-branch = 'ECE'.
append wa_itab to itab2.
clear wa_itab1, wa_itab2.
endloop.
Hope this will solve your problem.

Get data in editable ALV back to internal table without data_changed ev?

Hi,
I have an editable ALV using classes to whch I have users the option to edit directly on the screen or upload data from an excel. The event data_changed gets triggered when users edit the table on the screen.
However when EXCEL is uploaded, I refresh the table display. So, I need a way to get the data from the ALV into a internal table to check which rows were update using the excel and save them into the db table.
Prakash

Hi!
For more information, inspect programs suiting the mask "BCALVEDIT*" and the thread with header "How to make a row of ALV editable " (I know this is some more steps further from your demand but it may be useful) at URL " How to make a row of ALV editable " .
If you want to study more BC412 "EnjoySAP Controls" may help you.
*--Serdar

How to populate field catalogue fields in ALV using dynamic internal table

Hi All,
Please let me know how to populate field catalogue fields in ALV using dynamic internal table.
I have created <dyn_table> using code below.
CALL METHOD cl_alv_table_create=>create_dynamic_table
                 EXPORTING
                   it_fieldcatalog = g_t_ifc
                    it_fieldcatalog = g_t_fieldcat
                 IMPORTING
                    ep_table        = dy_table.
ASSIGN dy_table->* TO <dyn_table>.
Create dynamic work area and assign to FS
CREATE DATA dy_line LIKE LINE OF <dyn_table>.
ASSIGN dy_line->* TO <dyn_wa>.
Now this <dyn_table> has fields like idoc no.,creation date ,
segment field 1, segment field 2 etc..Now idoc no.,creation date are static fields from table EDIDC. And segment field 1, segment field 2 etc are dynamic fields from table EDSAPPL.
In my ALV report I am getting the final layout properly but I am unable to move values to corresponding fields in the final layout shown.Please let me know how to populate these fields from different tables.
I tried this way but its not working.
SORT g_t_edid4 BY docnum.
LOOP AT g_t_edidc INTO g_r_edidc.
    READ TABLE g_t_edid4 into g_r_edid4
                     WITH KEY docnum = g_r_edidc-docnum
                                    BINARY SEARCH.
    IF sy-subrc = 0.
      <dyn_wa> = g_r_edid4-sdata.
     MOVE-CORRESPONDING g_r_edid4 to <dyn_wa>.
   CLEAR g_r_edid4.
    ENDIF.
MOVE-CORRESPONDING g_r_edidc to <dyn_wa>.
APPEND <dyn_wa> TO <dyn_table>.

You have to assign each field to field symbol and then assign the value to that field symbol and asssign that field symbol to workarea field symbol.
LOOP AT g_t_edidc INTO g_r_edidc.
READ TABLE g_t_edid4 into g_r_edid4
WITH KEY docnum = g_r_edidc-docnum
BINARY SEARCH.
IF sy-subrc = 0.
ASSIGN COMPONENT 'SDATA' OF STRUCTURE <DYN_WA> TO <DYN_FLD>.
<DYN_FLD> = g_r_edid4-sdata.
" <dyn_wa> = g_r_edid4-sdata.
" Assign each fields like this.
" MOVE-CORRESPONDING g_r_edid4 to <dyn_wa>.
CLEAR g_r_edid4.
ENDIF.
" MOVE-CORRESPONDING g_r_edidc to <dyn_wa>.
APPEND <dyn_wa> TO <dyn_table>.
Regards,
Naimesh Patel

Using for all entries of two internal tables in where clause of the select

Hi experts,
My requirement is, need to select Marc-minbe and wrpl-sobst, for all the entries of the two internal tables it_mara , and it_t001w.
here is the select queries i have used,
select matnr normt from mara into it_mara for all entries in it_data where normt = it_data-normt.
select konnr werks from t001w into it_t001w for all entries in it_data where konnr = it_data-konnr.
now i need to select minbe of marc table and sobse of wrpl table for all the entries of above internal tables, it_mara and it_t001w, using both matnr of it_mara and werks of it_t001w in where condition.
Pls advise how i can do it.
Thanks.
Moderator message: very basic, please work on this yourself first, these forums are not a substitute for ABAP training.
Edited by: Thomas Zloch on Dec 6, 2010 9:38 AM

Hi
call SE16 with table TFTIT in order to get a full list (it will be long...)
A list of FMs with parameters can be found in table FUNCT.
Finally go to sm37rsdf4
that will give you all the function modules with description
Here is the list:
http://www.erpgenie.com/abap/functions.htm
hope this helps...
Regards
CSM Reddy

I want to create an ALV with two row fields name

Hi
I want to create an ALV with two row fields name. please suggest how to do it or send some sample code
thanks

Hi,
see this link
http://****************/Tutorials/ALV/ALVMainPage.htm
http://www.alvrobot.com.ar/tutorial.php
https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/b09ac4d5-e3ad-2910-6a81-96d1b861928c
http://abapprogramming.blogspot.com/2007/11/alv-check-boxes-sample-code.html
REPORT zalv5 NO STANDARD PAGE HEADING.
Description----
TOPICS INTRODUCED:
1. Learn about the u2018Standardu2019 PF-Status that comes as default.
2. Exclude function codes from u2018Standardu2019 PF-Status and customize it.
TYPE-POOLS: slis.
DATA: BEGIN OF i_data OCCURS 0,
qmnum LIKE qmel-qmnum,
qmart LIKE qmel-qmart,
qmtxt LIKE qmel-qmtxt,
ws_row TYPE i,
ws_char(5) TYPE c,
chk,
END OF i_data.
DATA: report_id LIKE sy-repid.
DATA: ws_title TYPE lvc_title VALUE 'An ALV Report'.
DATA: i_layout TYPE slis_layout_alv.
DATA: i_fieldcat TYPE slis_t_fieldcat_alv.
DATA: i_events TYPE slis_t_event.
DATA: i_header TYPE slis_t_listheader.
DATA: i_extab TYPE slis_t_extab.
SELECT qmnum
qmart
qmtxt
INTO TABLE i_data
FROM qmel
WHERE qmnum <= '00030000010'. LOOP AT i_data. i_data-ws_row = sy-tabix. i_data-ws_char = 'AAAAA'. MODIFY i_data. ENDLOOP. report_id = sy-repid. PERFORM f1000_layout_init CHANGING i_layout. PERFORM f2000_fieldcat_init CHANGING i_fieldcat. PERFORM f3000_build_header CHANGING i_header. PERFORM f4000_events_init CHANGING i_events. CALL FUNCTION 'REUSE_ALV_GRID_DISPLAY' EXPORTING * I_INTERFACE_CHECK = ' ' * I_BYPASSING_BUFFER = * I_BUFFER_ACTIVE = ' ' i_callback_program = report_id * I_CALLBACK_PF_STATUS_SET = ' ' * I_CALLBACK_USER_COMMAND = ' ' * I_CALLBACK_TOP_OF_PAGE = ' ' * I_CALLBACK_HTML_TOP_OF_PAGE = ' ' * I_CALLBACK_HTML_END_OF_LIST = ' ' * i_structure_name = ' ' * I_BACKGROUND_ID = ' ' i_grid_title = ws_title * I_GRID_SETTINGS = is_layout = i_layout it_fieldcat = i_fieldcat * IT_EXCLUDING = * IT_SPECIAL_GROUPS = * IT_SORT = * IT_FILTER = * IS_SEL_HIDE = * I_DEFAULT = 'X' i_save = 'A' * IS_VARIANT = it_events = i_events * IT_EVENT_EXIT = * IS_PRINT = * IS_REPREP_ID = * I_SCREEN_START_COLUMN = 0 * I_SCREEN_START_LINE = 0 * I_SCREEN_END_COLUMN = 0 * I_SCREEN_END_LINE = 0 * IT_ALV_GRAPHICS = * IT_ADD_FIELDCAT = * IT_HYPERLINK = * IMPORTING * E_EXIT_CAUSED_BY_CALLER = * ES_EXIT_CAUSED_BY_USER = TABLES t_outtab = i_data EXCEPTIONS program_error = 1 OTHERS = 2 . IF sy-subrc <> 0.
MESSAGE ID sy-msgid TYPE sy-msgty NUMBER sy-msgno
WITH sy-msgv1 sy-msgv2 sy-msgv3 sy-msgv4.
ENDIF.
*& Form F1000_Layout_Init
FORM f1000_layout_init USING i_layout TYPE slis_layout_alv.
CLEAR i_layout.
i_layout-colwidth_optimize = 'X'.
i_layout-edit = 'X'.
ENDFORM. " F1000_Layout_Init
*& Form f2000_fieldcat_init
FORM f2000_fieldcat_init CHANGING i_fieldcat TYPE slis_t_fieldcat_alv.
DATA: line_fieldcat TYPE slis_fieldcat_alv.
CLEAR line_fieldcat.
line_fieldcat-fieldname = 'QMNUM'. " The field name and the table
line_fieldcat-tabname = 'I_DATA'. " name are the two minimum req.
line_fieldcat-key = 'X'. " Specifies the column as a key (Blue)
line_fieldcat-seltext_m = 'Notification No.'. " Column Header
APPEND line_fieldcat TO i_fieldcat.
CLEAR line_fieldcat.
line_fieldcat-fieldname = 'QMART'.
line_fieldcat-ref_tabname = 'I_DATA'.
line_fieldcat-hotspot = 'X'. " Shows the field as a hotspot.
line_fieldcat-seltext_m = 'Notif Type'.
APPEND line_fieldcat TO i_fieldcat.
CLEAR line_fieldcat.
line_fieldcat-fieldname = 'QMTXT'.
line_fieldcat-tabname = 'I_DATA'.
line_fieldcat-seltext_m = 'Description'.
APPEND line_fieldcat TO i_fieldcat.
CLEAR line_fieldcat.
line_fieldcat-fieldname = 'WS_ROW'.
line_fieldcat-tabname = 'I_DATA'.
line_fieldcat-seltext_m = 'Row Number'.
APPEND line_fieldcat TO i_fieldcat.
CLEAR line_fieldcat.
line_fieldcat-fieldname = 'WS_CHAR'.
line_fieldcat-tabname = 'I_DATA'.
line_fieldcat-seltext_l = 'Test Character Field'.
line_fieldcat-datatype = 'CHAR'.
line_fieldcat-outputlen = '15'. " You can specify the width of a
APPEND line_fieldcat TO i_fieldcat. " column.
CLEAR line_fieldcat.
line_fieldcat-fieldname = 'CHK'.
line_fieldcat-tabname = 'I_DATA'.
line_fieldcat-seltext_l = 'Checkbox'.
line_fieldcat-checkbox = 'X'. " Display this field as a checkbox
line_fieldcat-edit = 'X'. " This option ensures that you can
" edit the checkbox. Else it will
" be protected.
APPEND line_fieldcat TO i_fieldcat.
ENDFORM. " f2000_fieldcat_init
*& Form f3000_build_header
FORM f3000_build_header USING i_header TYPE slis_t_listheader.
DATA: gs_line TYPE slis_listheader.
CLEAR gs_line.
gs_line-typ = 'H'.
gs_line-info = 'This is line of type HEADER'.
APPEND gs_line TO i_header.
CLEAR gs_line.
gs_line-typ = 'S'.
gs_line-key = 'STATUS 1'.
gs_line-info = 'This is line of type STATUS'.
APPEND gs_line TO i_header.
gs_line-key = 'STATUS 2'.
gs_line-info = 'This is also line of type STATUS'.
APPEND gs_line TO i_header.
CLEAR gs_line.
gs_line-typ = 'A'.
gs_line-info = 'This is line of type ACTION'.
APPEND gs_line TO i_header.
ENDFORM. " f3000_build_header
*& Form f4000_events_init
FORM f4000_events_init CHANGING i_events TYPE slis_t_event.
DATA: line_event TYPE slis_alv_event.
CLEAR line_event.
line_event-name = 'TOP_OF_PAGE'.
line_event-form = 'F4100_TOP_OF_PAGE'.
APPEND line_event TO i_events.
CLEAR line_event.
line_event-name = 'PF_STATUS_SET'.
line_event-form = 'F4200_PF_STATUS_SET'.
APPEND line_event TO i_events.
ENDFORM. " f3000_events_init
FORM F4100_TOP_OF_PAGE *
FORM f4100_top_of_page.
CALL FUNCTION 'REUSE_ALV_COMMENTARY_WRITE'
EXPORTING
it_list_commentary = i_header.
ENDFORM.
FORM F4200_PF_STATUS_SET *
FORM f4200_pf_status_set USING i_extab TYPE slis_t_extab.
REFRESH i_extab.
PERFORM f4210_exclude_fcodes CHANGING i_extab.
SET PF-STATUS 'STANDARD' OF PROGRAM 'SAPLSALV' EXCLUDING i_extab.
ENDFORM.
*& Form f4210_exclude_fcodes
FORM f4210_exclude_fcodes USING i_extab TYPE slis_t_extab.
DATA: ws_fcode TYPE slis_extab.
CLEAR ws_fcode.
ws_fcode = '&EB9'. " Call up Report.
APPEND ws_fcode TO i_extab.
ws_fcode = '&ABC'. " ABC Analysis.
APPEND ws_fcode TO i_extab.
ws_fcode = '&NFO'. " Info Select.
APPEND ws_fcode TO i_extab.
ws_fcode = '&LFO'. " Information.
APPEND ws_fcode TO i_extab.
ENDFORM. " f4210_exclude_fcodes
thanks
karthik
reward me if usefull

Comparing each value of two internal tables

HI everybody,
i have two internal tables itab1 and itab2 same structure
both r having four fields each and field with values
now i need to compare the two internal tables
and if every value of itab1 matches itab2
then i have to write one select quirie for the following given description
compare past and current shipping point
compare internal_table2 and internal_table3
if entry in internal_table2 and internal table3 match
variable_tknum = internal_table2-tknum
endif.
for each entry that matches:
select vlabdata into zi_vlabdata from vlbl where vbeln = variable_tknum and vlbl-vlabtyp = 'ZIBOOKNO'.
plz give me solution for this
thanks
hridhayanjili.

sort : ITAB1 by f1,f2,f3,f4,
       ITAB2 by f1,f2,f3,f4.
LOOP AT ITAB1.
READ TABLE ITAB2 WITH KEY F1 = ITAB1-F1
                            F2 = ITAB1-F2
                            F3 = ITAB1-F3
                            F4 = ITAB1-F4 BINARY SEARCH.
IF SY-SUBRC = 0.
*--all the fields of ITAB1 and ITAB2 are matching .
*--write your logic here
ELSE.
*--ITAB1 and ITAB2 records are not matching.
ENDIF.
ENDLOOP.
Regards
Srikanth
Message was edited by: Srikanth Kidambi

Reg comparison of two internal tables

hi friends,
please help me solving this.
there are two internal tables t_zvs38 and t_value
1.t_value like seahlpres
2.t_zvs38 like zvs38.
values in t_value will be like this.
first line wil contain zmdtype(mandatory document) and second line will contain
zmdtypet (the description for zmdtype).
eg.
D001 -
-zmdtype
internal----
zmdtypet
D002
external
D003
renewal
values in t_zvs38.
for a particular sales.org the zmdtype is filled.
select vkorg zmdtype into corrsponding fields of table t_zvs38
where vkorg = p_vkorg.
Now i want to compare t_value and t_zvs38 with field zmdtype
and delete the contents of t_value which are not in t_zvs38.
i have written like this.
loop at t_value.
read table t_zvs38 with key zmdtype = t_value-string.
if sy-subrc ne 0.
delete t_value. "to delete zmdtype
sy-tabix = sy-tabix + 1.
delete t_value. " to delete zmdtypet
else.
sy-tabix = sy-tabix +2. "to go to next zmdtype.
endif.
endloop.
but it is deleting all the contents of t_value.
points are assured.

CLEAR zvs32t.
SELECT zvs32tzmdtype zvs32tzmdtypet
    INTO (zvs32t-zmdtype, zvs32t-zmdtypet)
    FROM zvs32t
    JOIN zvs32
    ON   zvs32tzmdtype = zvs32zmdtype
    WHERE zvs32t~spras    = sy-langu
    AND   zvs32~zfrenewal = space.
     WRITE zvs32t-zmdtype TO t_value.
    APPEND t_value.
    WRITE zvs32t-zmdtypet TO t_value.
    APPEND t_value.
ENDSELECT.
SELECT vkorg vkbur zmdtype FROM zvs38 INTO CORRESPONDING FIELDS OF TABLE t_zvs38
WHERE vkorg = p_vkorg
AND vkbur = p_vkbur.
LOOP AT t_value INTO wa_area1.
    v_index = sy-tabix.
    READ TABLE t_zvs38 INTO wa_area2 WITH KEY zmdtype = wa_area1-string
BINARY SEARCH.
   IF sy-subrc NE 0.
      IF l_flag IS INITIAL.
        DELETE t_value INDEX v_index.
       ELSE.
        CLEAR l_flag.
      ENDIF.
   ELSE.
      l_flag = 'X'.
   ENDIF.
ENDLOOP.
Using this code ,i am unable to ge the correct output.Thank u all for ur help.

Downloading two internal tables in same text file

I have one internal table as like below.
Data:begin of itab1 occurs 0,
     rec(5),
     end of itab1.
Itab1 is getting updated from input text file(Continuous text).
Here Itab1 contains one record with Indicator '01 and n number of records with indicator '02'.
This needs to be seperated in to two internal tables.
data:Begin of Itab_Head occurs 0,
     Rec_ind(2) type C,
     Name(3) type C,
     end of itab_Head.
data:Begin of Itab_Item occurs 0,
     Rec_ind(2) type C,
     Id(3) type C,
     Status(10,
     end of itab_Item.
loop at itab1.
If itab1-Rec+0(2) = '01'.
   Itab_Head-Rec_Ind = itab1-rec+0(2).
   Itab_Head-Name = itab1-rec+2(3).
   Append Itab_Head.
elseif itab1-rec+0(2) = '02'.
   Itab_Item-Rec_Ind = itab1-rec+0(2).
   Itab_Item-Id = itab1-rec+2(3).
   Append Itab_Item.
endif.
endloop.
After moving to the internal tables I am doing some processing and updating the status of Itab_item.
After all these again I have to download the internal table as a text file.Now my question is.
I have values in 2 diff internal tables.How to download the two in same file.

See this sample code.
data: itab1 type string occurs 0 with header line,
      itab2 type string occurs 0 with header line.
itab1 = 'itab1_text'.
append itab1.
itab2 = 'itab2_text'.
append itab2.
CALL METHOD CL_GUI_FRONTEND_SERVICES=>GUI_DOWNLOAD
    exporting
      FILENAME = 'C:\ftext.txt'
    APPEND = 'X'
    changing
     DATA_TAB = itab1[].
CALL METHOD CL_GUI_FRONTEND_SERVICES=>GUI_DOWNLOAD
    exporting
      FILENAME = 'C:\ftext.txt'
      APPEND = 'X'
    changing
     DATA_TAB = itab2[].
Svetlin

Two internal tables in to one internal table

Hi ,
I have two internal tables ITAB1 and ITAB2, i would like to put fields from two internal tables in to one internal table(ITAB3) with out using inner joint. any one of you can give the sample code for this
Thanks
Raja.

Hi,
Kamesh wrote :
Read itab2 into wa_itab2 with key f2 = itab1-f1 <USe your where conditions here>.
Read statement does not have WHERE conditions.
Please be careful while posting. Your thread will be reffered by many people. Please dont mislead.
Regards,
Swapna.

Function module for comparing contents of two internal tables

Hi All,
Is there any function module to compare contents of two internal tables of same structure?
If yes please let me know.
Thanks in advance.
Amol

Hi
call SE16 with table TFTIT in order to get a full list (it will be long...)
A list of FMs with parameters can be found in table FUNCT.
Finally go to sm37rsdf4
that will give you all the function modules with description
Here is the list:
http://www.erpgenie.com/abap/functions.htm
hope this helps...
Regards
CSM Reddy

How to check two internal table fields

Hi all,
I need to check two internal table fields are equal or not means which statement i can use.
Not internal table ,table contents i need to check i.e
it1-pernr = it2-pernr.
like this
if i put loop it'll check one table field for one loop.
if i put two loop means some fields reflecting 2 in it1 then it'll pring 4 times like that.i want to print whatever in internal table only .
pernr(0001) two times there in it1 means
it1-pernr = it2-pernr then
it's printing
0001
0001
0001
0001
like this but actually in it1 only two records.
Anybody know solution.tell me.
Thanks
Regards,
Nandha

Hi,
code for your view
data : begin of it1 occurs 0,
       z_pernr like pa9012-pernr,
       z_fac_c like pa9012-zz_fac_c,
       end of it1.
data : it2 like Zsc1 occurs 0 with header line,
It1 data
pernr   FAC C
0001   5555
0001   5555
0002   4444
0003   3333
0006   8888
It2 data
pernr   FAC C
0001   5555
0001   5555
0005   6666
0003   3333
output(My code)
loop at it2 .
loop at it1 where pernr = it2-pernr.
write:/01 it1-1pernr,
        10 it1-z_fac_c.
endloop.
endloop.
out put i need.
0001   5555
0001   5555
0002   4444
0003   3333
Thanks,
Nandha

Compare two internal tables

hi everybody
i have two internal tables ITAB1 AND ITAB2
I WANT TO COMPARE THE CONTENTS OF THESE INTERNAL TABLES HOW TO DO THIS
REGARDS
HRIDHANJILI

Hello Hridhayanjili
The most detailed comparison is to use the same logic as change documents are prepared. Assuming both of your itabs are of structure struc_a. Then define the following type:
TYPES: BEGIN OF ty_s_itab_di.
INCLUDE TYPE struc_a.
TYPES: CHIND TYPE bu_chind.
TYPES: END OF ty_s_itab_di.
TYPES: ty_t_itab_di TYPE STANDARD TABLE OF ty_s_itab_di
WITH DEFAULT KEY.
DATA:
gt_itab_old TYPE ty_t_itab_di,
gt_itab_new TYPE ty_t_itab_di.
Fill itabs gt_Itab_old with the corresponding data of itab1 and gt_itab_new with the corresponding data of itab2.
Very important: sort you itabs either by all key fields or by all fields.
Call function CHANGEDOCUMENT_PREPARE_TABLES with the following parameters
- CHECK_INDICATOR = ' '
- TABLE_NEW = gt_Itab_new
- TABLE_OLD = gt_itab_old
The function module will remove identical lines from both itabs. New entries in gt_itab_New will have CHIND = 'I' and deleted entries in gt_itab_old will have CHIND = 'D'.
Read the documentation of the function module and play around with it. You will see that this a quite easy yet powerful approach for comparing itabs.
Regards
Uwe

Alv with two internal tables

Similar Messages

Maybe you are looking for