Amend From: address for inbox items

Hi All,
I have a customer who has recently migrated to Exchange, but during the migration some messages corrupted the from address on the messages. I am hoping to be able to programatically fix this for the users. I was thinking I might be able to use EWS to edit
the headers of the message but after some research this doesn't appear to be possible.
Can anyone think of a way I would be able to programatically be able to find messages within the inbox of several users, all from the same "address" (although this isn't a valid SMTP address) and change this to the correct one?
All potential suggestions welcomed, not afraid of getting my hands dirty learning something new!
Thanks in advance!
Mike
Mike Parker | MCSE - Messaging | www.cloudbusiness.com</ a>

EWS won't allow you to update the From or Sender on non-draft messages. You might be able to do this with Extended MAPI if you're willing to go down the non-managed development route (C/C++). You could download
MFCMapi to investigate if it's possible before spending too much time on it.

Similar Messages

Affecting the "From" address for ical invites

Does anyone know of any scripts that help adjust the "from" address for ical invites? I use 6 or so addresses for different purposes (almost all gmail), and it is helpful if I can send invites from a specific address which the intended recipient is used to seeing from me, else I risk it being sent to their junk inbox, and (gasp) appearing unprofessional.
Thanks.
Matthew

Hi Matthew,
There are six handlers in the applescript (all staring with "on send..." or 'on show..."). Find the fifth one.
The third to last line in the fifth handler is "send mymail". Replace this line with:
-- Altered to open notifications in Mail.app without sending
-- Original line quoted out below.
-- send mymail
set visible of mymail to true
activate
-- End Altered to open notifications
Save and close the applescript.
This modification has survived several updates in Tiger on my machine. I'd expect the transfer to Leopard will mean re-assessing it.
John M

Setting the From Address for Reply in Mail

I am having trouble setting the default “From” address for replies in Mail. When I click on “Reply” the new window opens with a default mail address I do not wish to use. This can be changes by going into the drop down box and setting a different one. This is time consuming and it is easy to send from an inappropriate address.
“Help” menu says that the default address ( top one in the drop down box) can be changed and gives these instructions:
Set the From address
Your messages are sent from the account of the currently selected mailbox. If you have multiple email accounts, you can specify a different account to use for sending all messages, or select an account just for the message you’re writing.
To specify the account to use for sending all messages, choose Mail > Preferences, click Composing, and then choose an account from the “Send new messages from” pop-up menu.
To specify an account just for the message you’re writing, click the From pop-up menu, and then choose an email address. To change the order in which addresses are listed in the pop-up menu, reorder the addresses in the “Email address” field in the Account Information pane of Mail account preferences.
When I open the Mail Account Preferences and go to Account Information there is no list of addresses in the “Email address” just the one for the particular account highlighted in the left column eg. “[email protected]” or “[email protected]” .
I tried to move the order of the accounts in the left hand box but nothing wants to move. Clicking and holding to push one account over another seems not to work.
Anyone got any ideas on how to fix this?
NB: This is about "Reply". Default for "New Message" is setting fine.

i found out how to do this finally!
1) set up google gmail account to forward your emails to (from the [email protected])
2) go to your gmail account
3) go to settings (cog in right hand corner)
4) go to 'accounts and import'
5) go to 'send mail as'
6) click 'Add another email address you own' - add your [email protected] address
7) google will send a verification email with code to that email address.
8) enter code
9) go back to gmail account >'send mail as' and select 'make default'
10) close mac 'mail' program and reopen it.
as long as you have gmail account selected as the primary account in MAIL - mail will now come throught as being sent from that [email protected] address!!

How to set FROM ADDRESS for EMAIL activity in Process Flow

Hi all,
Can any one tell how to set(which address) FROM ADDRESS for EMAIL activity in Process Flow?
Thanks,
Suvvi

Did you set what OWB guide says:
To execute a process flow with an email activity, you may need to access different host machines and ports. New security measures implemented in Oracle Database 11g Release 1 restrict access to hosts and ports. You must explicitly grant access to hosts and ports that the email activity accesses using the DBMS_NETWORK_ACL_ADMIN package.
For example, the user OWBSYS needs to send an email through the mail server mail.example.com using port 25. The DBA must perform the following steps:
1. Create an Access Control List (ACL) for the user OWBSYS using the following command:
EXECUTE DBMS_NETWORK_ACL_ADMIN.CREATE_ACL
(’acl_for_owb_cc.xml’,’ACL for Control Center’,’OWBSYS’,’CONNECT’);
The ACL has no access control effect unless it is assigned to network target.
2. Assign the Access Control List (ACL) to a network host, and optionally specify a TCP port range. Use the following command:
EXECUTE DBMS_NETWORK_ACL_ADMIN.ASSIGN_ACL (’acl_for_owb_cc.xml’,’mail.example.com’,25)
3. Commit the changes made using the COMMIT command.

SharePoint 2013 Workflow - Change the From Address for an email

Hello
I am creating a SharePoint 2013 Workflow Manager Workflow to send out an email when a document is uploaded to a document library. I want to set the From address for the Email activity added to my Workflow. There is no option in Properties to change this.
This used to be done when creating a SharePoint 2010 workflow in Visual Studio 2012.
How can I add a From email address for my workflow?
Thanks
Yoshi

Having problems getting SPD 2013 installed on my laptop because of a trial of O365, but I know in SPD 2010 you could find the BCC fields, etc... in the Advanced properties, it wasn't directly available via the common interface. I know 2013 is very
different from 2010, and if I can get it to install correctly, I will update, but look for an advanced property, or an XML view where you can find the FROM: field.

Is it possible to autocreate requisition from Projects for inventory items

Is it possible to autocreate requisition from Projects for inventory items with destination type of inventory in a non-manufacturing organization?Also how ti budget for inventory items based on actual cost i.e. FIFO cost?
Zeeshan

Hi Dina,
Hope you are fine and enjoyed the weekend.
Thanks for your help, yes there was an error in the Material Transactions form, i have corrected and PA_TRANSACTIONS interface got updated. I issued the stock to Project and there was'nt any transaction transferred to Projects.
I just want to confirm one more thing, we are using FIFO costing method, if i procure same item for 2 different projects like Qty 1 with Rate 10 for Project 123 on 1st Jan 2010 and then i receive same item Qty 1 Rate 20 for Project 124 on 10 Jan 2010. Then everything will be transferred to Projects and Projects Expediture will be updated with the receiving Transactions.
Now what if, the stock is being issued in the reverse order than it was received. Like I enter Miscellaneous issue for Project 124 first, then as per FIFO rules system will pick Issue rate of 10 because it was received first......Due to this, dont you think its wrong from the system's point of view. Infact it should pick issue rate of 20 because it was received at 20.....
One more thing, While doing Miscellaneous Transaction with Projects enabled, do the Locator Project Number and Source Project Number needs to be same. If No then whats the control that stock received for one project should be issued against that project only.
Your thoughts on this scenario.
Zeeshan

Exchange generates failure report emails for Inbox items which haven't attempted to be synced

Hello,Our ActiveSync client is reporting errors to the user when the user is sent certain types of recurrence invites. If an invite to a meeting is sent from the Outlook Web App to the user, and the user then syncs their Inbox (using our ActiveSync client and the Sync command), instead of receiving the correct email, they will get an email indicating an error:
From: Microsoft Exchange on Behalf of *user’s name*
Subject: Synchronization with your WinRT failed for 1 items.
Body:
Synchronization with your Winrt failed for 1 items.
The following items couldn’t be sent to your mobile phone. They haven’t been deleted …
Item Folder: Inbox
Item Type: IPM.Schedule.Meeting.Request
Item Created: *date*
Item Subject: *subject of missing email*
(WinRT is the name of our client currently.)
This occurs consistently when the invite is for a recurring meeting, which occurs on the last day of a month, yearly. (Yearly on the nth day of the month)
It also seems that after one of these error emails appears, other items start to be added in with it, although this could just be the result on my side from a lot of testing side effects.
There’s two strange things to note about this error.
The Exchange server never attempts to even send the items via ActiveSync to our client, so the error does not seem to be caused by our Sync request. I’ve used Fiddler to examine the calls, and we never receive the original message in any form.
The Windows Mail client (in Windows 8.1), which uses ActiveSync, has no problem Syncing the very same items that are causing the errors to appear. This gives the impression that something can be done to remedy the problem, but I have no idea what.Thanks
ArchieCoder

Hello ArchieCoder,
This is certainly not what I would expect to see. However, I can't say with certainty that it's related to the syncing issue.
I went back and looked at the Fiddler trace you took from the Windows Mail client. It gets the same FolderSync response. The first three folders in the response look like I expect--Calendar has ServerId 1, Contacts has ServerId 2, and Deleted Items has ServerId
3. After that, the ServerId value jumps to 11 for the Drafts folder, so it and all of the subsequent folders have a ServerId value that is 7 higher than what I would expect to see.
What seems especially weird to me is that the Windows Mail client proceeds to issue a Sync request for the list of CollectionIds I reported earlier, despite several of them being absent from the FolderSync response. Furthermore, it looks like the Windows
Mail client is getting Inbox items that are identified as being in CollectionId 5:
<?xml version="1.0" encoding="utf-8"?>
<airsync:Sync xmlns:airsync="AirSync">
   <airsync:Collections>
      <airsync:Collection>
         <airsync:SyncKey>933450273</airsync:SyncKey>
         <airsync:CollectionId>5</airsync:CollectionId>
         <airsync:Status>1</airsync:Status>
         <airsync:Commands>
            <airsync:Add>
               <airsync:ServerId>5:391</airsync:ServerId>
               <airsync:ApplicationData>
                  <email:Subject>Canceled: Last day of december</email:Subject>
I'm really at a loss for what is going on with this. How difficult would it be for you to test this with your client assuming that Inbox is CollectionId 5 instead of the 12 that is returned from the FolderSync? I am afraid we might be focusing too closely
on this particular aspect of the issue without being sure it could be causing the real problem, so I think it would be good if you can either reproduce the failure syncing CollectionId 5 instead of 12, or show that your client fails in some other way if it
tries to sync CollectionId 5. A Fiddler trace of the outcome of that test including both the FolderSync response and Sync request/response would be the next logical step here, I think, assuming that that is doable. Please let me know what you think.
Best regards,
Matt Weber | Microsoft Open Specifications Team

Is there a way to set a default From address for my iCloud account?

Is there a way to have mail use my .mac address as my preferred iCloud address? I have mail configured to set the From header based on the account I'm accessing, so my work email will come from my work account, and my personal email will come from my personal account. I'd like to keep that configuration.
Unfortunately, I use my .mac address for my personal email, and Apple keeps attaching new, unwanted email addresses to my iCloud account (.mac.com, .me.com and now .icloud.com). Mail somehow sees three addresses on my iCloud account, and defaults the From header to .me.com. For a variety of reasons, including personal preference, I don't ever want to use the .me.com or .icloud.com addresses.
Alternately, is there a way to delete the unwanted .me.com and .icloud.com addresses?
Thanks

I appreciate the reply, but it only gets me partway there. I already have that option set to 'Account of selected mailbox' so that replies to email on my work account (a non-iCloud account) come from my work email address.
My problem is my personal mail is on an iCloud account that, thanks to Apple, now has three email addresses associated with it. So when I reply to a personal email, the 'Account of selected mailbox' option frequently, but not always, chooses the wrong iCloud address for the From field.
Ideally, I'd like to be able to tell Mail that it should use my .mac address for email from my iCloud account, and my work address for mails from my work account. I'd like it to never use the .me or .icloud addresses. I don't think there's an automatic way to do that.
I'll likely end up filing a bug report with Apple.

Choose from list for purchase Item

Dear Experts,
i have created Choose from list in matrix using Screen Painter. its working properly but i want to display only Purchase Items in CFL.
For Customer we are using
oCons = oCFL.GetConditions()
            oCon = oCons.Add()
            oCon.Alias = "CardType"
            oCon.Operation = SAPbouiCOM.BoConditionOperation.co_EQUAL
            oCon.CondVal = "C"
            oCFL.SetConditions(oCons)
Like this, How to set condition for Purchase items thru coding or Screen painter
Mathi

Hi Mathi,
Try this and tell me if it worked.
oCons = oCFL.GetConditions()
oCon = oCons.Add()
oCon.Alias = "PrchseItem"
oCon.Operation = SAPbouiCOM.BoConditionOperation.co_EQUAL
oCon.CondVal = "Y"
oCFL.SetConditions(oCons)
If this works dont forget to reward points..
Regards,
Vasu Natari.
Edited by: vasu natari on Jul 29, 2008 12:37 PM

Using another from address for Gmail account in Mac OSX Lion's Mail app

Hi,
On my iPhone I've set up gmail as an Exchange accout and when I send an e-mail, my from address appears to be the one I select as default address in gmail preferences.
Is there any way to achieve this in Mac OSX Lion's mail application?
Regards,
Erdem Kucuk

Hmmm, not sure what is going on, but from the Mail log, neither of those IPs have a name associated with them, 1st one is in Netherlands, 2nd one is iin Africa!???
Any idea why it'd be looking those up?
I wonder if your Facebook account has been hacked, or See if you might have this malware redirecting DNS queries...
http://macmegasite.com/node/3924
http://www.ehow.com/how_2128387_remove-osxrspluga-trojan-horse-mac.html
How to fix...
http://www.macosxhints.com/article.php?story=20071031114140862
Known DNSChanger address ranges. Source: dcwg.org
http://krebsonsecurity.com/2012/03/court-4-more-months-for-dnschanger-infected-p cs/

Selecting from wwsbr_all_items for Custom Item Display

I'm trying to call a procedure that will create custom HTML for an item I created. In that procedure I'm trying to get the name of the object I'm passing from the wwsbr_all_items view. However, when I try to select from the view I get the following error
(p_url is a VARCHAR2 with a valid ID number)
SELECT name
FROM wwsbr_all_items
WHERE id = p_url
ERROR:
ORA-14551: cannot perform a DML operation inside a query
ORA-06512: at "Portal.WWCTX_SSO", line 2954
ORA-06512: at "Portal.WWCTX_SSO", line 3483
ORA-06512: at "Portal.WWCTX_SSO", line 1735
ORA-06510: PL/SQl: unhandled user-defined exception
ORA-06512: at "PORTAL.WWCTX_SSo", line 1578
ORA-06502: PL/SQl: numeric or value error
ORA-06512: at "Portal.WWCTX_SSO", line 1820
ORA-06512: at "Portal.WWCTX_API", line 199
I also get a similar error if I try to select * from the view. Any ideas??
Thanks!

I believe you need to set your context up. Try the following. You will need to substitute with your own parameters.
portal.wwctx_api_private.set_context(p_user_name => 'PORTAL',
p_password => 'password', p_update_flat => true);
You may have to wrap your code, so the password is not visible.

From Address for out going email in IC Web Client

Hi Experts,
System: SAP CRM 2007 (ERMS)
Whenever we log in to the agent inbox and try to respond to an email, the FROM address defualts to the log-in address. The system should ideally pick up the list defined in "Outgoing email address group" maintened in email profiles.
The email profile is assigned to the right business role and the agent is assigned to the right position with the same business role.
Would any one know, why this problem occurs?
Regards,
Ronit

Resolved at our end. This was due to a small customization done earlier.
Regards,
Ronit

Changing From address for Apple .Mac account

Greetings,
I use Mail with multiple IMAP email accounts. I'm using my .Mac account as my primary "incoming" account although it receives email for multiple addresses.
In my Accounts Preferences, there is a field to change the From address (by default [email protected]) so that when I compose messages my from address would be [email protected] (the primary address I use).
It lets me change this field and asks me if I want to save the changes, but then reverts back to [email protected] as soon as I move to another screen and come back.
Any suggestions on how I can configure Mail to handle this properly? Any other mail client such as Thunderbird would let me do this and it works fine for other accounts in Mail.
It seems that Apple put in a special rule to not let me change my .Mac account even though I can change all the others. That's something I would expect Microsoft to do but not Apple...
Suggestions?
~Josh

I figured out how to do this by setting up my .Mac account as an IMAP account instead of .Mac. It takes the same settings, but lets you make the change to your from address.

Get value from fields for list items using CSOM SP 2013 and C#

Hi.
I added a few columns (e.c. Column1, Column2 and ...) for the List in SP 2013. In the List there are a few records. How to get data entry and display them in a table. For example:
ClientContext ctx = new ClientContext(ServerUrl);
List lists = ctx.Web.Lists.GetByTitle(List_name);
ListItemCollection items = lists.GetItems(CamlQuery.CreateAllItemsQuery());
ctx.Load(lists);
ctx.Load(items);
ctx.ExecuteQuery();
DataTable table = new DataTable();
table.Columns.Add("ID");
table.Columns.Add("FieldValue1");
table.Columns.Add("FieldValue2");
foreach (ListItem item in items)
table.Rows.Add(item.ID, item["Column1"], item["Column2"]);
Thanks!

Hi,
Thanks for your sharing. It will help others who stuck with the similiar issue.
Best Regards
TechNet Community Support
Please remember to mark the replies as answers if they help, and unmark the answers if they provide no help. If you have feedback for TechNet Support, contact
[email protected]

Automatically select certain From address for particular recipients?

I have several email accounts and Mail makes it fairly easy to choose which one I want to use when sending new mail.
However there are a number of recipients that I email and I only ever want those particular recipients to receive email from a certain account.
Is there a way for Mail to switch to a particular account in the 'From' field when emailing certain recipients?
I checked in the Preferences > Compose pane but couldn't find an option there.
Thanks everyone

Is there a way for Mail to switch to a particular account in the 'From' field when emailing certain recipients?
Yes, and No. If you are replying to an email from one of these recipients, Mail will default to sending it from the same account it arrived at, which is presumably the same one you sent it from.
If you're just sending a new message to one of these recipients, there is no way for Mail to switch to a particular account based on the recipient.

Amend From: address for inbox items

Similar Messages

Maybe you are looking for