Amount field display as 0.00

Hi friends,
we have requirement to display amount value as 0.00 if amount is 0 in the custom screen field(data type CURR).
user is requesting us to display amount in screen field with 0.00 if the amount is 0.
i want to do this through screen attributes ..
Please help

HI Thanks for your reply.
we need to display for input amount screen field once user enter value 0 it shoud display as 0.00..
as you said i enter and it works fine if i enter 0.00 or 20.00.etc.
if i enter 0 or 20..etc. its going to dump and given msg as shown below.
i etntered amount screen field attributes as follows:
Attrubutes:
under Dict TAB:
FORMAT CURR
Conv.Exit: NUMCV
Ref.field : T001-WAERS
under program TAB
inout field & ouput field check boxes checked
dump:
runtime Error UC_OBJECTS_NOT_CHARLIKE
Occurred on 10.05.2008 at 05:24:31
he current statement is defined for character-type data objects only.
Error analysis:
Only character-type data objects are supported at the argument
position "OUTPUT" for the statement
"TRANSLATE".
In this case, the operand "OUTPUT" has the non-character-type "P". The
current program is flagged as a Unicode program. In the Unicode context,
type X fields are seen as non-character-type, as are structures that
contain non-character-type components.
Please help me.
thanks

Similar Messages

Problem with ALV amount field display

hi friend!!
i have a editable ALv out put and in that i am displaying Amount and quantity field. In O/p if i enter 100 its taking as 100,00 .Please tell me how to correct the same.
Plz help me

Try to fill the Ref_fieldname and Ref_tabname in the fieldcatalog.
also specify decimals = 0 for the column which you are editing.
fieldcat-ref_fieldname = 'KWMENG'.
fieldcat-ref_tabname = 'VBAP'.
fieldcat-decimals_out = 0.
"if you want decimals then specify the number how many you want

DIsplaying WRBTR (AMOUNT FIELD)WITHOUT DECIMAL PLACES

Dear all,
I am facing a problem in displaying amount field in alv report. I have two currency keys (US dollar and Japan yen). if it is japan yen I should not have to show decimal places and if it is US dollar I should show decimal places.
How can I do it in a alv report if I have only one output amount field?
thanks
Ranjan.

Hi chittaramjan,
1. use this kind of funda (just copy paste in new program)
Important things
a) one extra field in internal table
declared in the same exact fashion
waers LIKE tcurc-waers,
b) Populate this field
c) REST THE System will take care
   (based upon country settings)
2.
REPORT abc.
TYPE-POOLS : slis.
DATA : alvfc TYPE slis_t_fieldcat_alv.
DATA : BEGIN OF itab OCCURS 0,
        f1 LIKE P0008-BET01,
        waers LIKE tcurc-waers,
        END OF itab.
START-OF-SELECTION.
itab-f1 = '-4.15'.
itab-waers = 'KRW'.
APPEND itab.
itab-f1 = '4.68'.
itab-waers = 'GBP'.
APPEND itab.
CALL FUNCTION 'REUSE_ALV_FIELDCATALOG_MERGE'
    EXPORTING
      i_program_name     = sy-repid
      i_internal_tabname = 'ITAB'
      i_inclname         = sy-repid
    CHANGING
      ct_fieldcat        = alvfc.
CALL FUNCTION 'REUSE_ALV_LIST_DISPLAY'
    EXPORTING
      i_callback_program      = sy-repid
      it_fieldcat             = alvfc
    TABLES
      t_outtab                = itab
    EXCEPTIONS
      OTHERS                  = 2.
regards,
amit m

Adding Amount field in BSEG table and display it single line item?

hi experts,
       I am doing credit / debit form now my requirement is
                                           According to BELNR , GJAHR,BUKRS i want to find credit amount for this selection cretiria.
                     so i want to add all the lines of amount filed for a particular BELNR and display it as single line.
so i am getting data from print program like this
SELECTION-SCREEN BEGIN OF BLOCK b0 WITH FRAME TITLE text-001.
SELECTION-SCREEN SKIP 2.
PARAMETERS: p_belnr LIKE bkpf-belnr OBLIGATORY,
            p_bukrs LIKE bkpf-bukrs OBLIGATORY,
            p_gjahr LIKE bkpf-gjahr OBLIGATORY.
SELECTION-SCREEN END OF BLOCK b0.
SELECT SINGLE *
               FROM bkpf
               INTO i_bkpf
               WHERE belnr = p_belnr
                     AND ( blart = 'DG' OR blart = 'ZG' )
                     AND bukrs = p_bukrs
                     AND gjahr = p_gjahr.
IF sy-subrc = 0.
    SELECT *
          FROM bseg
          INTO table it_bseg
          WHERE belnr = i_bkpf-belnr .
ENDIF.
CALL FUNCTION 'SSF_FUNCTION_MODULE_NAME'
    EXPORTING
      formname                 = 'Z_CREDIT_DEBIT'    " p_name
VARIANT                  = ' '
DIRECT_CALL              = ' '
    IMPORTING
      fm_name                  = v_form_name
EXCEPTIONS
NO_FORM                  = 1
NO_FUNCTION_MODULE       = 2
OTHERS                   = 3
IF sy-subrc <> 0.
MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
        WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
ENDIF.
CALL FUNCTION v_form_name
EXPORTING
ARCHIVE_INDEX              =
ARCHIVE_INDEX_TAB          =
ARCHIVE_PARAMETERS         =
CONTROL_PARAMETERS         =
MAIL_APPL_OBJ              =
MAIL_RECIPIENT             =
MAIL_SENDER                =
OUTPUT_OPTIONS             =
USER_SETTINGS              = 'X'
IMPORTING
DOCUMENT_OUTPUT_INFO       =
JOB_OUTPUT_INFO            =
JOB_OUTPUT_OPTIONS         =
TABLES
    i_bkpf                     = i_bkpf
    i_bseg                     = i_bseg
EXCEPTIONS
FORMATTING_ERROR           = 1
INTERNAL_ERROR             = 2
SEND_ERROR                 = 3
USER_CANCELED              = 4
OTHERS                     = 5
IF sy-subrc <> 0.
MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
        WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
ENDIF.
so my I_BSEG containing all line items of particular BELNR . with the field SHKZG iam getting only credit line items .
now i want to do is add all credited amount and display like this in a table.
against ref# (BSEG-REBZG) ! details (BSEG-SGTXT)! amount
124569                                   10%discount                950.00(total amount ie sum of all lines amount for a BELNR)
                                                                                10.00(total tax amt ie sum of   all lines of tax amount for a BELNR)
                                                                                960.00

hi arun,
         i used collect in smartform my procedure is like this .
               i am getting data into i_BSEG because i declared like this in TABLES parameter
                  i created a loop .
                         in that i mentioned like I_BSEG into WA_BSEG.
                               then i created a program lines here i mentioned like this.
                                              COLLECT WA_BSEG INTO IT_BSEG.
           but because of BUZEI "Number of Line Item Within Accounting Document .it is not same it is varying for every credited time that means for every line of BELNR. thats why it is not adding it is just appending .
so pls tell me any other chance to find sum .
because i want to sum up all credted amount and display it in single line
ie first column REBZG "Number of the Invoice the Transaction Belongs to(against ref) i want to display once .
And Second column SGTXT "item text(details) for amount once and for tax amount once
And Third column Amount first line consists total amount & second line consists total for tax amount
regards,
satheesh.
[email protected]
any doubts chat me regarding this post.

Error when displaying amount field in HTMLB Tableview

Hi all,
I am displaying some 'X' table in HTMLB Tableview and it has one amount field.But reference(currency) field of that amount field is in other table . I know it gives the error.
Please tell me there is any other way to resolve this problem with out adding reference(currency)field in the same table?
Thanks and Regards ,
Harikrishna .

Hi Hari,
But reference(currency) field of that amount field is in other table . I know it gives the error.
It will not give any error , you can use the currency key field of other table or structure .
Alternatively you can use predifined type DEC instaed of CURR .
Regards,
Anubhav

Custom module pool + Amount field decimals display same as standard screen display

Hi All,
Requirement: A custom module program screen field has to be designed which displays decimal values of amount fields same as amount fields in standard screen.
Standard screen behavior: If the standard screen fields are observed, they refer to data elements WRBTR or AZSOL_F05A (transactions FB50/FB03/FB01). However, number of decimal places that are visible on screen are dependent on the currency that is provided.
Both the data elements have 2 decimal places.
For currency USD two decimal places are displayed - in TCURX - decimal places are two.
For currency JPY or CLP - zero decimal places are displayed - in TCURX - decimal places are zero.
i.e., even though the screen field refers to data element or domain that has the characteristic to show 2 decimal places, based on currency, decimal places are adjusted.
I would like to know how this is happening on standard screen fields.
Solution Required for: How to make the custom screen amounts to display same number of decimal places as standard screen amount fields.
P.S: Before posting the query here, research has been done in SDN and other places. It has been identified that quantity fields adjustments are discussed. However for amount field even though discussed earlier, did not reach a conclusion.
I would like to get a solution for this one.
Thanks in advance.
Goutham.

Thank you all for taking time to take a look at this query.
This issue has been resolved.
Resolution: If the standard transactions (FI transactions in specific) are observed, whenever there is a field that displays amount value, there will be a corresponding field (may not be beside the amount field, somewhere on the screen or in the same sequence of screens) where the currency key value would be entered.
For instance, if you look at FB50 - there is field on top for the user to input currency key value (like USD or CLP or INR).
When any amount field is declared - this currency key field is provided as the reference field in the screen attributes of the amount field.
In short, in the custom module pool program, provide a field that holds currency key value and use this field as reference field for the amount fields.
Do repond to this thread if the resolution is not clear.
Thank you all once again.
Goutham.

How make display only the amount field in table control(infotype 0008)

Dear Freinds,
have to make display only the amount field (Q0008-bet01) on table control in infotype 0008 , could you tell me how to make it display only.
i have tried the below coding it is not working in PBO & PAI of the user exit
ZXPADU01 and ZXPADU02. For the table control is there any othe method??
       loop at screen.
           screen-name = 'WA_P0008-BET01'.
          screen-input = 0.
          screen-output = 1.
          modify screen.
      endloop.
i have tried like this as well
       loop at screen.
           screen-name = 'Q0008-BET01'.
          screen-input = 0.
          screen-output = 1.
          modify screen.
      endloop.
in the both the above methods it is not working. Could any one plese suggest me how to make display only the amount field in infotype 0008.
regards
syamla

Dear Freinds,
have to make display only the amount field (Q0008-bet01) on table control in infotype 0008 , could you tell me how to make it display only.
i have tried the below coding it is not working in PBO & PAI of the user exit
ZXPADU01 and ZXPADU02. For the table control is there any othe method??
       loop at screen.
           screen-name = 'WA_P0008-BET01'.
          screen-input = 0.
          screen-output = 1.
          modify screen.
      endloop.
i have tried like this as well
       loop at screen.
           screen-name = 'Q0008-BET01'.
          screen-input = 0.
          screen-output = 1.
          modify screen.
      endloop.
in the both the above methods it is not working. Could any one plese suggest me how to make display only the amount field in infotype 0008.
regards
syamla

Award amount field in Infotype 183 as display (Grey/Non-input) only field

Hello friends,
I want award amount field in infotype 183 (Award) as display (Grey/Non input) only field. I tried to do it throught txn user screen change but it is not working.
Pls suggest how to do it.
Thanks in advance
anand

Try using IT Screen Control table T588M with Module Pool MP018300 and check the radio Button for the field Amount as Output only .
If there is no entry for MP018300 in T588M , Create one .Hope this works for you.
Subhash

Displaying amount field in smartform output

hi experts,
i am printing amount field in smartform output. like this 11,200.
but i need to display like this $11,200.
i need to print $ with amount field .
can u give me some idea?
Thanks

Hi,
Try like this.
Data : v_amount type i value 11200,
v_final type string
If u r getting currency, then check the currency.
If Curr eq 'USD'
concatenate '$' v_amount into v_final separated by space.
endif.
Print V_FINAL where do u want.

Alignment required in to display the Amount field

Hi Friends,
kindly help me facing problem in to display the amount using decimal places also
nedd to display the Pretax and aftertax amount for that purpose
written below code .
it is picking amount fields but the amount is printing like this
pretax                  aftertax
$ 34.67               $     0.00
$ 21.64               $   120.90->
I need to display amount fields in order like, thens, hundreds, thousands like.
read table lt_final into ls_final with key bplan = 'PRD'.
   if ls_final-pretx = 'X'.
     pretax = ls_final-eecst.
     write pretax to lv_pre.     "#EC UOM_IN_MES
     concatenate c_dollar lv_pre into lv_dollar.
      shift lv_dollar right deleting trailing space.
*Pretax totals
     lv_pretax = lv_pre.
     read table out_pay1 with key name = 'PRETAX'.
     check sy-subrc = 0.
     out_pay1-value = lv_dollar.
     modify out_pay1 index sy-tabix.
     clear out_pay1.
   else.
     aftertax = ls_final-eecst.
     write aftertax to lv_after.
     concatenate c_dollar lv_after into lv_dollar1.
      shift lv_dollar1 right deleting trailing space.
Aftertax totals.
     lv_aftertax = lv_after.
     read table out_pay1 with key name = 'AFTERTAX'.
     check sy-subrc = 0.
     out_pay1-value = lv_dollar1.
     modify out_pay1 index sy-tabix.
     clear out_pay1.
   endif.
Thanks,
Sai

Hi Daya,
I would like to print two amount values with decimals.
like : like Pretax      after tax
                               $      0.00
      $   3.45             $ 120.67
      $   0.00             $      0.00
I created using right justification one paragraph format with two tabs
60.00              ch           Right
68.00              ch           Right
But my program output is comming like this.
any one please help me.
Program output:
Pretax               after tax
                               $    0.00
      $   3.45           $ 120.67
      $   0.00             $    0.00
Thanks,
Sai

Suppress leading spaces while displaying an amount field in a Smart form

Hi all,
In a smart form, I am using fields like KONV-kbetr and VBAP-netwr each of them currency type and 2 decimal places. I want to suppress the decimal places and also the leading spaces while displaying these fields in a smartform cause when this field is inserted in a sentence, a lot of gap is there between the field and the words of the sentence. I dont want to change the field length cause it can be that huge in some cases.
Please help.
Thanks ,

Hi, if you would place it in a sentence, it would be an option to concatenate the text and values into one string and then condense it.
concatenate <text> <value> into lv_sentence.
condense lv_sentence.
but another way is to use codes for displaying values in smartforms:
This is from a smartforms PDF i have..
Output Options for Field Contents
Use the Formatting options to adapt the value of a field before printing it. You can enter the
relevant parameters directly behind the field name. Make sure to write the short forms of the
different options in uppercase letters. Some of the options can be combined.
General Information
The formatting options are not suited for all data types of fields (for example, for character fields
you need no exponential representation). You must distinguish between numeric fields and
character fields.
Numeric Fields
If specified, the system first evaluates the length (<length>).
If no length is specified, the system displays the value in its overall length.
The trailing blank indicates a positive sign. To suppress it, use formatting option S.
Any offset <offset> specified is ignored.
Sequence of evaluation: (<length>), sign to the left(<),Japanese date (L), suppress blanks (C),
right-justified display (R), insert fillers (F).
Character Fields
By default, the system displays the value of a field in its overall length, but truncates trailing
blanks.
Sequence of evaluation: suppress blanks (C), <offset> and (<length>), right-justified display (R),
insert fillers (F).
Overview
Formatting Options for Fields
Syntax Description
&field+<offset>& Skips <offset> places of the field value (character fields only). If the
offset is greater than the length of the value, nothing is displayed.
&field(<length>)& Sets the output length to <length>.
&field(*)& If the field is defined by a Data Dictionary type, Smart Forms set the
output length to the value specified there.
&field(S)& Suppresses the sign
&field(<)& Displays the sign to the left of the number
&field(.<nat.number>)& Limits output of decimal places to <nat.number>
&field(E<nat.number>)& Displays the field value with the fixed exponent <nat.number>. The
mantissa is adapted to this exponent by shifting the decimal
character and inserting zeros.
SAP Smart Forms (BC-SRV-SCR) SAP AG
Output Options for Field Contents
72 April 2001
&field(T)& Suppresses thousand indicators when displaying fields of types
DEC, CURR, INT, and QUAN.
&field(Z)& Suppresses leading zeros of numbers
&field(I)& Suppresses display of initial values
&field(K)& Deactivates a conversion routine specified in the Data Dictionary.
&field(R)& Right-justified display. Use this option only when specifying an
output length as well.
&field(F<filler>)& Replaces left-justified blanks in the value by the fill character <filler>.
&field(L)& Converts and a date field to a local date and displays it. The date is
then formatted using edit mask JPDAT.
Since this representation uses Japanese characters, use it in the
Japanese version of the SAP System only.
&field(C)& The system takes the field value as a sequence of words separated
by blanks. Option C shifts these words to the left and leaves only
one blank inbetween as separator. Any leading blanks are
suppressed. This effect corresponds to that of the ABAP statement
CONDENSE.

Error in Report: Next to amount field i could see 'ERROR' word in report

Guys,
Problem in Report: Next to amount field i could see 'ERROR' word in report
Eg: Invoice Amount : "1200ERROR" it should be like "$1200".
Pls help where do i need to check.
Thanks

Ajeet wrote :
Hi,
It can heppens if all the records getting aggregated in the report are of different currencies and not belonging to one currency.
Do a currency conversion for the key figures and make them all with same currency.
See if the records in the cube for the selection which you have given in the report gives you records with different currency and if it is true then as above said.
Thanks
AJeet
Are you sure ???
The mixed unit values will be displayed as * (by default unless its changed).
ERR comes if unit is not maintained.

How to maintain the amount field format after GUI_DOWNLOAD

Hi everyone.
I have this problem on my object.
The format of field ERFMG in table AUFM is 3.921,569.
After I SELECT it INTO an internal table it becomes like this 3921.569
I would display this internal table in ALV and its ok. Its format is 3.921,569 The format is also not changed when I download it into an excel file using LIST -> EXPORT -> LOCAL FILE -> SPREADSHEET.
However my program should automatically download to local if the user tick a checkbox in the selection-screen. It will use function module GUI_DOWNLOAD. When this is used, the format of ERFMG changes to 3921.569 again, since it is using my declared internal table.
How will I use GUI_DOWNLOAD without changing the format of amount fields like ERFMG? What are my other options to do this?
The Decimal Notation in my User Profile is already set to 1.234.567,89
Thank you in advance.

Hi Cris,
To get the output in the user format for the decimals, try the following code.
data: wg_dec(7) type p decimals 2.
data: wg_dcp type usr01-dcpfm.
data: wg_dec_str(10) type c.
wg_dec = '111135.67'.
select single dcpfm from usr01
into wg_dcp
where bname = sy-uname.
move wg_dec to wg_dec_str.
if wg_dcp ne 'X'.
replace all occurrences of '.' in wg_dec_str with ',' .
endif .
write:/ wg_dec, wg_dec_str.
I dont feel there is any other option where you can change the decimals format as per the user profile.
While giving the output of decimal values in a list, the system automatically displays it in the profile set by the user.
This code will help you to set the decimal value as '.' or ',' as per the user profile.
Note: It wont add the unit separator for hundreds and thousands. Again you have to do that manually.
Hope this proves of some help to you.
Regards,
Pulkit

How to roll up Amount field upto Input Criteria Posting period

Hi All,
I have a requirement to create a FI Budget report where the User will give the Posting Period as the input criteria, and based on the entered Posting period, 2 amount fields, "Original Budget" & "Current Month" need to get derived by looking at another amount field called actual, by rolling up the Amounts up to the entered Posting period.
For example, the user gives input as Posting period = 06, which is December because Fiscal year starts from July here. And my Cube has an amount field "Actual" which displays amount for each posting period. Therefore when posting period = 06, then the "Actual" amount value for months July (PP = 01) through December (PP = 06) should be rolled up i.e added and displayed in the "Original Budget field". The Current month should only display the amount for the input criteria month.
How can I do that, any suggestions please?
Thanks!!

Hi Sam,
Is there any way i could do it without the SAP Exit? If yes, how? If no, can u specify in the document you sent, which code i could use as reference for my requirement?
Thanks

Amount field is not populating properly

Expert's,
Here is an issue where one of the amount field not populating properly.For some opportunities the amount field will be just displyed as'0' but for some opprtunities the amount field is displaying as'$0'.The data we are pulling is from CRM.
Thanks in advance.
vasu.

Hi,
looks like extenstion of your last thread
did you already have a look in data in cube?just to make sure,try to display cube's data using List cube transaction .Take this amount field,corresponding Currency Key,and you rmost impotant characteristics...and check whether all records are having entry in 'currency' column?

Amount field display as 0.00

Similar Messages

Maybe you are looking for