AMSCHECK doesn't seem to receive all data in live broadcasting.
Hi,
I'm testing AMS for live broadcasting with AMSCHECK. A Flash program published a video stream at around 400Kbps. Using a Flash-based viewer, the reproduced image was fine and the AMS administration console reported the out-going bit rate was about 400Kbps per viewer (normal). Then using AMSCHECK to receive the same stream, the AMS administration console reported it was 50Kbps (of course it should have been 400Kbps). Looking at access.00.log and calculating the average streaming bitrate from the 'duration' and 'sc-stream-bytes', they corresponded to the values reported by the monitor. And changing the source configuration and increasing the stream bitrate to about 1Mbps, again AMSCHECK seemed to receive only 50Kbps. For making our stress check meaningful, we need AMSCHECK receives all the data being broadcasted. Is there any way for AMSCHECK to receive all the steam in live broadcasting?
Note that we used a modified 'livepkgr' as the application.
Thanks,
Yoichi
There is nothing you can do.
You cannot use other countries itunes stores.
Similar Messages
-
Forum search doesn't seem to work for Date Range 'ALL'
Hi there,
Forum search doesn't seem to work for Date Range option: 'ALL' .
For a given search criteria, I get few search results when the date range is chosen as 'last year', but for the same search criteria, when the date range is chosen as ALL, no search results are shown (not even the ones shown earlier for last year selection).
regards,
AJCan you please delete my few duplicate replies in [CJ20n|Re: Long Text at Activity Level in CJ20N] thread?:-)
Cheers,
Amit. -
Hi folks,
Ronny's here again on forums, having particularly 2 (two) questions/problems to resolve:
1) Countdown Timer to the designated Date for Live-Broadcast-Event yet to take place
2) Detect End of Live Stream on FLVPlayback with FLVPlayback.isLive = true
attached is the .zip file (as3_Countdown Timer_ver 1.0.1_by Ronny Depp.zip) with all flash source files containing:
a) The FLash Source (file: timer_module.fla) - (FLA flash source file - Flash CS3 Professional, Flash Player 9, actionscript 3.0)
b) com.othenticmedia.utils.dateAndTimeManagement package including 2 .as actionscript 3.0 Class files.
i) com.othenticmedia.utils.dateAndTimeManagement.DateAndTimeManager Class in the said package. (file: DateAndTimeManager.as)
ii) com.othenticmedia.utils.dateAndTimeManagement.CountdownTimer Class in the package. (file: CountdownTimer.as)
c) The compiled SWF file version of this Application's blueprint. (file: timer_module.swf).
What i need to confirm is: ........................................................ see the next post of mine. (for Problems need to be Resolved)Problems to Resolve:
Problem#1) - Countdown Timer to the designated Date for Live-Broadcast-Event yet to take place.
Problem#2) - Detect End of Live Stream on FLVPlayback with FLVPlayback.isLive = true;
Problem#1 Description:
I need to pinpoint the Logical TimeSync Exception, i am still unable to figure out. That is I'm using a webservice in my Application to Synchronize the Time with the actual ET (eastern time) with accomodation of auto-adjustment for EDT GMT-4 (eastern daylight time) & EST GMT-5 (eastern standard time), times. I am using the zipcode: "10012" to pass it to the Web Service in urlRequest object, to retrieve the Current ET eastern time according to EDT & EST time settings for Manhattan/Brooklyn areas or others within New York, NY 10012.
Currently the Web Service is returning accurate date/time based on local EDT GMT-4 daylight time.
Is there some defined set of dates for EDT & EST times for New York region that I can check for to ensure the correct Dates/Times for Eastern Time in New York area ??? I am using NY zipcodes because i am sure to get correct ET values.
The Major Problem Part: is I need to correct the time by 2 seconds or approx. 2 secs, some millisecs.
When I retrieve the Time Value from WebService, it lags behind for 2 seconds as compared to DateObj i create using computer's local time, on my Windows XP Service Pack 2 with Automatic Updates turned-on. And I'm sure about my Windows will be having latest updates for Time Management already installed. I also added the 2 secs. to the TimeSync(ed) Date to make correction to this Date obj.
I call my custom fucntion addSeconds(dateObj:Date, secs:int) to add 2 seconds to the Date by Converting Seconds to Milliseconds.
Please comb through the as code in files attached and Help Me Out !!!
Problem#2 Description:
Secondly I need to Detect the End of Stream state while using FLVPlayback component, an rtmp:// live Stream from FLASH MEDIA SERVER.
I need to Play a YuMe Post-Roll Ad when Steam Finishes/Ends.
Live Broadcast Stream Event starts every night on Wednesdays & Saturdays exactly at 10:59 PM EDT GMT-4.
Live Events only Streams/Broadcasts the stream for 50secs. exactly. When [playback stopped] it plays a PostRoll Ad and after the CountdownTimer again comes back to life. The Next upcoming Event is calculated & the Countdown begins until Next Event's time/date is reached.
Here is the code on the frame 1 on the MainTimeline: (rest of the params like source, volume, skinAutoHide are Set using Property Inspector for FLVPlayback instance on Stage)
//myStream instance of FLVPlayback is on the Stage
myStream.isLive = true;// Frame 1 Actions in the FLA
myStream.addEventListener(VideoEvent.COMPLETE, onEndOfStream);
myStream.addEventListener(VideoEvent.STATE_CHANGE, onState);
myStream.addEventListener(String(VideoError.NO_CONNECTION), onStreamError);
myStream.addEventListener(NetStatusEvent.NET_STATUS, netStatusHandler);
/*if(myStream.stopped){
trace("tracy: "+myStream.state);
} else if(myStream.state == VideoState.STOPPED){
trace("tracy: "+myStream.state);
function onStreamError(event:VideoError) {
trace(event.code + "\n\t" + event);
function onState(event:VideoEvent) {
trace(event.state + "\n\t" + event.toString());
function onEndOfStream(event:VideoEvent) {
trace(event.state + "\n\t" + event.toString());
function netStatusHandler(event:NetStatusEvent):void {
switch (event.info.code) {
case "NetConnection.Connect.Success":
//connectStream();
break;
case "NetStream.Play.StreamNotFound":
trace("Stream not found: "/* + myStream.source*/);
break; -
Wacom Tablet doesn't seem to work all of the time?
I have a Wacom Intuos 3 tablet, not more than a year old. I recently installed it onto my Macbook Pro and it worked fine, but when I unplugged it and came back to work with it later, it doesn't seem to work. The mouse doesn't respond to where I click on the pad.
So, I've reinstalled this a couple of times and was able to make it work perfectly, but today when I went back to work in photoshop, it doesn't seem to be responding again.
Does anyone have any tips? I know that Leopard likes you to eject USB devices instead of just pulling them out of the slot, but I don't see anywhere to eject it.
Does anyone know what's up?Downloaded a driver from website, tablet works now.
-
Why can't I get my printer to print out a playlist from i-tunes? It used to work, but now the printer doesn't seem to recognize the "print" command coming from i-tunes. The printer works for other applications!
I finally solved this problem after toiling with it for a couple of days. Solution: Once you have burned your CD you must go back into iTunes to your music/playlists and select the playlist you just burned and click file; print and you will get the mosaics that we have been accustomed to. I was on hold with Apple Support when I found this myself. Yes......!!! Problem solved..for me anyway. Good luck!
Scott -
Not receiving all data while running a script
Hello, I have been working on this script the last few days now and get farther and farther on it. Yesterday I finally thought I had it all complete and went to implement on a server. When I finally moved it over and did a test run the only data I was
sent was two things Success and seconds. I didn't actually get the date or anything else. When I says seconds it just said that but didn't actually get me any data. When I ran this on me machine before I moved it over it was working. When I moved it back to
my computer and tried again I am no longer getting the same results. For some reason it worked for awhile but no it isn't.
$cred = Import-Clixml -Path C:\users\passworddoc.xml
$url = "siteURL"
$response=Invoke-WebRequest $url -Credential $cred
if ($response.statuscode -eq 200) {
"Success`t`t" + $startTime.DateTime + "`t`t" + ($endTime - $startTime).TotalSeconds + " seconds" | Out-File "C:\Users\T&E.csv" -Append
} else {
"Fail`t`t" + $startTime.DateTime + "`t`t" + ($endTime - $startTime).TotalSeconds + " seconds" | Out-File "C:\Users\T&E.csv" -AppendYou apparently had something setting $startime and $endtime when you were testing.
Whatever it was doesn't appear to be part of that script, so those values are going to be null.
[string](0..33|%{[char][int](46+("686552495351636652556262185355647068516270555358646562655775 0645570").substring(($_*2),2))})-replace " " -
Local administrator doesn't seem to have all rights
Hello everyone,
We're offering hosted servers to our customers. We always deploy Windows Server 2008 R2 for them. Since last Monday, we began looking into offering Hosted 2012 R2. Everything works as expected except one thing. We use a script to create users, and in that
script we run a command within the "Run As" command (to open regedit.exe). On Server 2008 R2 this goes without problems but on 2012 R2 I get the warning that the user that executes the run as command doesn't have enough privileges to do so. I've
tried to create a new user, assign it to the local administrators group and then run the same command and that goes without problems. It looks like our local administrator doesn't have all the administrator rights. UAC is turned off and the server has been
rebooted a couple of times. There's now domain active, everything is being done locally.
Help would be appreciated since we're not sure what's going on.
Kind regards and thanks in advance.I'm very sorry for my late reply, I have been sick for some weeks so I didn't had the time to continue on this.
But I'm very pleased to say that it's fixed! I've changed our script to create users from:
@ECHO OFF
set username=%1
set password=%2
set fullname=%3
ECHO [x] Creating user...
net user %username% %password% /add /fullname:%fullname% /passwordchg:no /scriptpath:script.bat
ECHO [x] Running reg. Please provide password...
net localgroup Administrators %username% /add
runas /user:%computername%\%username% "regedit /s \\%computername%\share\regedit\reg.reg"
net localgroup Administrators %username% /delete
to:
@ECHO OFF
set username=%1
set password=%2
set fullname=%3
ECHO [x] Creating user...
net user %username% %password% /add /fullname:%fullname% /passwordchg:no /scriptpath:script.bat
ECHO [x] Running reg. Please provide password...
runas /user:%computername%\%username% "regedit /s \\%computername%\share\regedit\reg.reg"
and that did the trick! The net localgroup Administrators %username% /add
is necessary in 2008 R2 but not in 2012 R2 and that caused the error
I would like to thank everyone for their time! -
I'm trying to load data then run a stored procedure when it finishes. So my code looks like:
(using runspaces, fwiw, but this is within the same runspace)
Write-DataTable -ServerInstance $server_repository -Database $database_repository -TableName myinsert -Data $LogResults
invoke-sqlcmd2 -serverinstance $server_repository -database $database_repository `
-query "EXEC myinsert_Blacklist_Removal @ComputerName = '$computername', @EventLog = '$eventlog'"
My blacklist code deletes from the table, inserts remaining records into the master table, then deletes from the staging table. Further complicating matters is the use of full-text, which speeds up the delete based off the blacklist.
However, I'm seeing where the data isn't touched. So I added this to the beginning of the stored procedure:
SELECT @max_recordnumber = MAX(RecordNumber)
FROM myinsert
WHERE eventlog = @EventLog
AND ComputerName = @ComputerName
INSERT INTO myinsert_Blacklist_Calls (computername, eventlog, max_recordnumber) VALUES (@ComputerName, @EventLog, @max_recordnumber)
And to my surprise, I have NULLs for the max_recordnumber, even though I can see the record in the staging table.
Which means, I think, that stored procedure is called before the BulkInsert is finished. Which makes no sense. Maybe it hasn't finished committing from disk before the SP runs? *shrug* I'm really stumped and it's torking me off good.
Any help greatly appreciated.
MichaelWhat bulk insert?
You need to post issues with SQL in the SQLServer forum. None of this is done by Powershell so it is not a scripting issue.
\_(ツ)_/ -
ITunes no longer seems to embed all data in mp3's
Hi all, been using iTunes for years now and one thing i've always liked is if i've imported a CD in to iTunes, i can simply transfer the files to another MAC/PC, drag and drop in to the library and all of the song info, artwork etc is there.
Since approx iTunes 7/Transferring to Intel Macs i'm not finding this is the case, whenever i try and transfer albums to a new machine now all i have is the song title and the artwork, everything else is missing. This is really frustrating, am i doing anything wrong.
Thanks in Advancebumm
-
Not receiving all data across tcp/ip port
Hi,
i am trying to transfer data across a tcp/ip port. the data is in binary and is reliable when small amounts of data is passed. it starts to fail when i try to transfer around 10000 bits and it is random(sometimes i get more or lest data when requesting the same amount). any advice on what to do. i attached the vi so you could see the code but it won't run unless you edit the ip and port to work with your settings.
thanks
Attachments:
TCPsavetest1.vi 56 KBHi,
Here is a Developer Zone article that explains more about TCP communication. Is your code set up similar to these examples? Are you able to run a TCP example from the LabVIEW Example Finder?
Amanda Howard
Americas Services and Support Recruiting Manager
National Instruments -
I have a number of external hard drives connected to my system - when I am powering down and I try to eject the drives before powering down the system tells me the drives can't be ejected because some other program may be using them. I have no other programs running and have to force eject the drives. This is something new that's happening and I'm worried it may mean somebody is accessing my system from outside my network. Anybody else have this issue?
What exactly is the material you have? What does item properties say about it? If it's too small you'll have to scale it up, but if you scale it up a lot it's going to get soft and pixely.
-
Tomcat doesn't send all data while Jetty does
I am using the following code in a servlet to send data back to a J2ME application:
data = myResp.serialize();
response.setStatus(response.SC_OK);
response.setContentLength(data.length);
response.setContentType("application/octet-stream");
OutputStream os = response.getOutputStream();
os.write(data);
os.flush();
os.close();
.and the following input code on the J2ME side (simplified a bit):
int len = (int)conn.getLength();
in = conn.openInputStream();
_data = new byte[len];
while (total < len) {
total += in.read(_data, total, len - total);
.Using Jetty as the servlet container, I am able to SEND and RECEIVE data without any problem. Using Tomcat, I usually get a -1 on the CLIENT side when trying to read the data. The CLIENT gets the length from the content header but there doesn't seem to be any data.
Simply put, what is wrong ? Is there a setting in Tomcat that I should look at ? Why would Jetty work with this code and not Tomcat ? This seems like simple standard stuff.
Thanks
=Alan=You should never explicitly close the ServletOutputSteam. The J2EE container will do that for you. You can still do the flush, but try it without the close.
-
Doesn't seem to be including all songs in shuffle. Repeats same songs
When in shuffle mode, doesn't seem to include all songs in the shuffle. It repeats the same songs.
Well, seems to me that if the computer is reading other CDs, the lens should not be a problem? If you really think it would help though, I suppose I'll try it.
Since I posted I've tried leveling the computer because I thought that might be an issue, but I think I can rule that out.
Could it be that I need to download some sort of driver update? I don't know when I purchased those Memorex CD-Rs that I'd been using and that worked, but the ones I just bought look a little different, so maybe they are also more advanced in some way?
Maybe 3 or 4 discs that I put in (out of maybe 50) actually did show up on the desktop and when I tried to burn them, started burning as normal. But then about 20 seconds into it, it said something about it not being able to burn.
I have also run Disk First Aid, which told me that there is an invalid PEOF. Could this be creating the problem?
Thanks to anyone who can shed some light... -
Hi I'm running Addressbook and cannot clear previous entry easily when searching my data base of around 5,000 contacts.
I prefer to view in All contacts on a double page spread with details on the right page. Searching doesn't seem to work correctly in this view.
It's always the second search that is problematic.
I've tried typing over and all it seems to do is confine the search to the the entries that have come up for the previous search.
I've tried to use the x to clear the previous entry and then type the next search, same problem. The only way seems to be to move from "All Contacts" to "Groups". Then the searched name appears and I can return to All Contacts to see full details.
Surely three key press' are not the way it's supposed to work?
FYI
Processor 2.7 GHz Intel Core i7
Memory 8 GB 1333 MHz DDR3
Graphics Intel HD Graphics 3000 512 MB
Software Mac OS X Lion 10.7.3 (11D50d)
Address book Version 6.1 (1083)
MacBook Pro, Mac OS X (10.7.1), 8Mb RAM 2.7Ghz i7AddressBook experts are here:
https://discussions.apple.com/community/mac_os/mac_os_x_v10.7_lion#/?tagSet=1386 -
I bought a new iMac today. I'm using migration assistant to move all my software, but the time just keeps getting longer. It says connect an Ethernet cable for faster data transfer. I did, but that doesn't seem to help. Any ideas?
m1doc,
Are you migrating from a Mac or a MS Window machine? Either way you probably should be in touch with AppleCare, you have 90 days of free AppleCare telephone support. They can usually help on issues like this. If you don't know the phone number please use http://support.apple.com/kb/HE57 to help find the number in your country.
Maybe you are looking for
-
i tried transferring my iphoto library from my old macbook onto my new macbook pro (via external hard drive), but when i open the new iphoto, it seems to have transferred ALL images ever used on my old macbook. so i tried to just delete all those ima
-
I have several applications that can rip CD's and/or convert audi file formats. Is Creative MediaSource any good - speed wise and quality wise? Thanks for any input
-
The process to pay vendors by CC and pay AMEX for charges
I have looked in the forums a bit but could not find this answer. We pay a lot of the POs using AMEX credit card. As such we need to process the POs belonging to the different vendors to say we paid by AMEX credit card. At the same time, we need to r
-
Application/x-mplayer2, application/x-mplayer2
hi guys help please i try to watch tv in intrnet in some wep and it syas u need to download vlc and idid that and instal a plugin and is not working help please
-
Final Cut Express 4 crashes on startup
I had FCE 4 HD installed on my iMac which has become increasingly unreliable due to freezing. Purchased a refurbished Mac Pro 3.0 x 8 core machine the other week, and have just tried to install FCE 4 on it from the original install disc. Install seem