An agent can't dial +E.164 string from CTIOS Toolkit Agent Desktop

There is a problem with dialing a +E.164 number from agent desktops (example: +380975431111). When they make a call, CTIOS Agent Desktop shows an error:
Client
MessageType:eMakeCallRequest
    ErrorMessage:Error [10117] The specified DTMF string is invalid
CTIOS Server
eControlFailureConf(14):The request specified a destination that is not valid.
PG & CG
Error=INVALID_DESTINATION
But when I place a call from IP Phone or IP Communicator it works using route "/+". All other destinations (00, 0, etc) can be reached through CUCM.
Are there some misconfigurations or its a limitation for Agent Desktop???
Thanks in advance for yours replies!!!
P.S.
Using CUCM 8.0.2, ICM 8.5.1, CTIOS 8.5.1

Artem,
This is expected behavior becuase E.164 is not supported with the latest versions for 8.x. However, it is being worked on for future support.
- Cisco CTI Server, CTIOS (8.x)
- Cisco CTIOS Toolkit Agent Client und CTIOS Toolkit Supervisor Client (8.x)
- CAD Agent Desktop and CAD Supervisor Desktop (8.x)
- Cisco Outbound Option (8.x)
Hope it helps ?
GP.
Pls rate helpful posts !!

Similar Messages

  • How can I dial a phone number from an email message directly

    How can I dial a phone number from an email message directly,
    But even before the selection i will change or correct the number?
    If I copy the number in the notebook, all spaces are filled with % signs.
    When I dictate SIRI the number I get the answer: I do not know the number
    If I copy the number in the phone selection (above) the number can not be edited afterwards.

    You can dial a number appearing in an email by tapping on it.
    But if you need to correct the number first you cannot edit a received email.
    To edit the number tap on the forward symbol and when the draft comes up you should be able to correct the phone number, copy it and paste into your Phone App. Then delete the forward email without sending it.

  • How can I get contacts and calendar from outlook on my desktop to my new ipad 4

    How can I get contacts and calendar from outlook on my desktop to my new ipad 4

    Move the cursor over the icon and click the X that appears.

  • How i can get a Word as String from Web Page??

    i wanna to open a web page - then from my application
    go to a specific word "programmer" - then below the word "programmer" it may have some other lists of words - this list may be in a format as index or just list-
    then i wanna get this list's words (strings/index) - then save these words/index to my vector class
    String pattern = "Programmer";
    then
    indexOf(pattern) ;
    can any one help me please
    thanx in advance

    Take a look at the java.net package, in particular the Url and HttpUrlConnection classes. This permits you to open a HTTP connection to a specified URL and read the response from a standard stream (and store the resulting bytes in a String if you wish).
    From there, it's all basic String manipulation.

  • I can't get the normal string from ResultSet

    Dear all:
    My EJB connected to Oracle 8i by using the Oracle thin JDBC driver. But when
    I get the string like this
    String str = ResultSet.getString(1);
    I got the return value was ASCII. For example, the right value should be "SMITH",
    but return value was "0x534Dxxxx".
    Another question is can ResultSet pass to JSP from EJB? If yes, how to do? I
    got problem when doing this.
    Thanks for everyone read this.

    * In Firefox 3.6 versions on Windows and Firefox 4 on Windows and Linux it's possible to hide the "Menu Bar" via "View > Toolbars" or via the right-click context menu of a toolbar.
    * Press F10 or press and hold the Alt key down to bring up the "Menu Bar" temporarily.
    * Go to "View > Toolbars" or right-click the "Menu Bar" or press Alt+V T to select which toolbars to show or hide (click on an entry to toggle the state).
    See also:
    * [[Menu bar is missing]]
    * http://kb.mozillazine.org/Toolbar_customization

  • Can't dial number with pauses from Favorites

    I have my work voicemail number programmed in along with both my extension and password, using the "p" for pause command in between each number.  This works fine when I'm calling straight from the phonebook or as a Speed Dial.  However, it'd be most convenient for me to dial it from the Favorites widget, but when I select it from there, it tells me "Call not sent, no valid number entered."  I'm assuming this is a bug.  Anyone know a solution besides "not doing that," as certain thin bespectacled black turtleneck-wearing chaps might be prone to say?

    Sorry folks, I meant the People widget, not the Favorites widget.  I use my Favorites group on the People widget, hence my confusion.

  • I can no longer sync my calendar from mobile (android) to desktop

    A calendar appears on my desktop but it remains blank and will no longer pick up the synch from my android mobile phone

    How is that related to Firefox support? Firefox doesn't have a calendar built in and doesn't sync any thing related to add-ons, if you have a calendar add-on installed.

  • The agent can not upload the xml file in the repository of the OMS

    Hi,
    I install an agent 10.2.0.4 HP-UX v.11.23, 64 bit, which has an Oracle database v.10.2.0.4.
    The OMS identified a single server, but no database.
    I uninstall the agent and remove the server from the OEM (html).
    I install agent again with the patch 6409645.
    Configure a security key to the agent (emctl secure agent).
    However, it generates a file error emagent.trc, when i start the agent:
    2009-04-14 12:23:05,819 Thread-1 WARN collector: MESSAGE_NLSID "Successful Name Registration Request Sent By Identity Provider(%)" is too long, truncating to "Successful Name Registration Request Sent By Identity Provider(%"
    2009-04-14 12:23:40,616 Thread-21 WARN upload: FxferSend: received http error in header from repository: https://gcontrol.manquehue.local:1159/em/upload
    ERROR-400|ORA-01861: literal does not match format string
    2009-04-14 12:23:40,619 Thread-21 ERROR upload: Failed to upload file B0000001.xml: HTTP error.
    Response received: ERROR-400|ORA-01861: literal does not match format string
    Please anyone can help me?
    David

    Hi:
    Do the following in OMS host:
    [oracle@gcontrol bin]$ ./emctl secure unlock
    Oracle Enterprise Manager 10g Release 4 Grid Control
    Copyright (c) 1996, 2007 Oracle Corporation. All rights reserved.
    Checking the security status of the OMS... Done.
    Stopping the HTTP Server... Done.
    Updating HTTPS Virtual Host for Enterprise Manager OMS... Done.
    Starting the HTTP Server... Done.
    OMS Unlocked. Non Secure Agents may upload using HTTP.
    [oracle@gcontrol bin]$
    In Agent host:
    $AGENT_HOME/bin/emctl unsecure agent
    $AGENT_HOME/bin/emctl secure agent
    $AGENT_HOME/bin/emctl start agent
    $AGENT_HOME/bin/emctl status agent
    $AGENT_HOME/bin/emctl upload agent
    but the error continues:
    2009-04-16 18:08:07,700 Thread-1 WARN http: snmehl_connect: connect failed to (delfos:1830): Connection refused (error = 239)
    2009-04-16 18:08:07,700 Thread-1 ERROR main: nmectla_agentctl: Error connecting to https://delfos:1830/emd/main/. Returning status code 1
    Even start the agent without security, but the error remains. (unsecure only)
    2009-04-16 18:07:43,353 Thread-1 WARN http: snmehl_connect: connect failed to (delfos:1830): Connection refused (error = 239)
    2009-04-16 18:07:43,354 Thread-1 ERROR main: nmectla_agentctl: Error connecting to http://delfos:1830/emd/main/. Returning status code 1
    Not yet implemented $OMS_HOME/bin/emctl secure lock
    Any idea?
    Thanks for your help.
    David

  • Can't change the connection string of SSIS package with derived columns?

    We upgraded SQL server 2008 to 2012, copied and converted all SSIS packages from Visual Studio 2008 to 2010.  When I opened a package in VS 2010 and tried to change the connection string, in the local connection managers, if the data source is another
    SSIS package B(.dtsx file) with derived columns, I can't change the connection string of package B. When I opened the file connection manager editor for package B and tried to locate a dtsx file in another location, saved the change, reopened the project.
    Package B still pointed to previous file.  Other packages without derived columns work fine. Any thoughts?

    We are using the package deployment model and refer to other packages in the same project. If
    we changed the path of package B (with derived columns) to "D:\Visual Studio 2010\xxxx", and refer it in package A, in the A's connection manager, the connection string of package B is still its previous location  "D:\Visual
    Studio 2008\xxxx". When we ran the package A in the SQL server agent, the data source is still
     "D:\Visual
    Studio 2008\xxxx", so how can I change it to "D:\Visual
    Studio 2010\xxxx"? Why has the package C (without derived columns) no such problem? thanks.

  • UCCX Multiple Phones Agent Predictive Outbound Dialer

    Under UCCX 10.5, does the Agent Predictive Outbound Dialer dials multiple phones per record in case of no answer, busy, etc?

    MR PIM unable to reserve agent.
    Can you check if you have label assigned for MR PIM on the Agent's Device Target?
    Do you see the Routing Script gets executed?
    "Router Log viewer" will be next thing to monitor when you try to run the Agent based campaign
    Thanks
    - abu

  • Scheduler agent can't submit state   ORA-06502:

    hi all
    scheduler agent can't submit state
    getting below error on agent side in $ORACLE_HOME/data/agent.log
    2012.08.31 03:32:56 MSD Job terminated successfully. Duration: 14.89 seconds
    2012.08.31 03:32:56 MSD Database Error on Submit: Job Run Completion Failed!
    2012.08.31 03:32:56 MSD Database Error on Submit: Error: ORA-06502: PL/SQL: numeric or value error: character string buffer too small
    wtf ?
    Edited by: djeday84 on Aug 31, 2012 10:34 AM
    ps: db oel 5.8 psu 11.2.0.3.2
    client win 2003 ( scheduler agent 11.2.0.3 )

    Hi Sridher,
    is there any question attached to your posting?
    How long is the answer of your web service? (in bytes)
    brgds,
    Peter
    Blog: http://www.oracle-and-apex.com
    ApexLib: http://apexlib.oracleapex.info
    BuilderPlugin: http://builderplugin.oracleapex.info
    Work: http://www.click-click.at

  • Can we change data in string object.

    Can we change data in string object.

    Saw this hack to access the char[]'s in a String in another thread. Beware that the effects of doing this is possible errors, like incorrect hashCode etc.
    import java.lang.reflect.*;
    public class SharedString {
            public static Constructor stringWrap = null;
            public static String wrap(char[] value, int offset, int length) {
                    try {
                            if (stringWrap == null) {
                                    stringWrap = String.class.getDeclaredConstructor(new Class[] { Integer.TYPE, Integer.TYPE, char[].class });
                                    stringWrap.setAccessible(true);
                            return (String)stringWrap.newInstance(new Object[] { new Integer(offset), new Integer(length), value });
                    catch (java.lang.NoSuchMethodException e) {
                            System.err.println ("NoMethod exception caught: " + e);
                    catch (java.lang.IllegalAccessException e) {
                            System.err.println ("Access exception caught: " + e);
                    catch (java.lang.InstantiationException e) {
                            System.err.println ("Instantiation exception caught: " + e);
                    catch (java.lang.reflect.InvocationTargetException e) {
                            System.err.println ("Invocation exception caught: " + e);
                    return null;
            public static void main(String[] args) {
                    char[] chars = new char[] { 'l', 'e', 'v', 'i', '_', 'h' };
                    String test = SharedString.wrap(chars, 0, chars.length);
                    System.out.println("String test = " + test);
                    chars[0] = 'k';
                    chars[1] = 'a';
                    chars[2] = 'l';
                    chars[3] = 'l';
                    chars[4] = 'a';
                    chars[5] = 'n';
                    System.out.println("String test = " + test);
    } Gil

  • How many Management agents can you have running simultaneously on a host?

    Hi all,
    I've scoured the Oracle documentation and not been able to find a definitive answer to this question, how many Oracle management agents can you have on a single managed host target? Can you for example run an 11g agent and a 12c agent simultaneously (whilst migrating to 12c without upgrading the present OEM instance) If so can you run two 12c agents, each pointing to a different OMS? I’ve seen examples of an agent for each database instance on a host managed target, so a host with three Oracle database instances has three Oracle Management agents all pointing to the same OMS with each agent is monitoring just one of the database instances. There must be resource considerations here for memory, cpu and network traffic etc? I’ve always understood it to be one Oracle Management Agent per managed host
    Thanks

    I don't think there's any data on impact or performance since it's not a recommended configuration. If you have host/configuration monitoring enabled on both agents, they will be running the same queries/scripts against the host/inventory, etc. so they will likely have contention at some point. If you monitor the same databases, you will definitely see contention and increased overhead as there will be multiple agents running the same queries. You might also see problems w/ any of the server generated alerts (tablespace, etc) if you change thresholds as the agents send that to the database, and then the database will be out of sync with the other agents.
    What exactly is the goal for having multiple agents? Is it short term or long term?

  • How Can I replace newScale Text Strings with Custom Values?

    How Can I replace newScale Text Strings with Custom Values?
    How can I replace newScale text strings with custom values?
    All  newScale text is customizable. Follow the procedure below to change the  value of any text string that appears in RequestCenter online pages.
    Procedure
    1. Find out the String ID of the text string you would like to overwrite by turning on the String ID display:
    a) Navigate to the RequestCenter.ear/config directory.
    b) Open the newscale.properties file and add the following name-value pair at the end of the file:res.format=2
    c) Save the file.
    d) Repeat steps b and c for the RmiConfig.prop and RequestCenter.prop files.
    e) Stop and restart the RequestCenter service.
    f) Log  in to RequestCenter and browse to the page that has the text you want  to overwrite. In front of the text you will now see the String ID.
    g) Note down the String ID's you want to change.
    2. Navigate to the directory: /RequestCenter.ear/RequestCenter.war/WEB-INF/classes/com/newscale/bfw.
    3. Create the following sub-directory: res/resources
    4. Create the following empty text files in the directory you just created:
    RequestCenter_0.properties
    RequestCenter_1.properties
    RequestCenter_2.properties
    RequestCenter_3.properties
    RequestCenter_4.properties
    RequestCenter_5.properties
    RequestCenter_6.properties
    RequestCenter_7.properties
    5. Add the custom text strings to the appropriate  RequestCenter_<Number>.properties file in the following manner  (name-value pair) StringID=YourCustomTextString
    Example: The StringID for "Available Work" in ServiceManager is 699.
    If you wanted to change "Available Work" to "General Inbox", you  would add the following line to the RequestCenter_0.properties file
         699=General Inbox
    Strings are divided into the following files, based on their numeric ID:
    Strings are divided into the following files, based on their numeric ID:
    String ID  File Name
    0 to 999 -> RequestCenter_0.properties
    1000 to 1999 -> RequestCenter_1.properties
    2000 to 2999 -> RequestCenter_2.properties
    3000 to 3999 -> RequestCenter_3.properties
    4000 to 4999 -> RequestCenter_4.properties
    5000 to 5999 -> RequestCenter_5.properties
    6000 to 6999 -> RequestCenter_6.properties
    7000 to 7999 -> RequestCenter_7.properties
    6. Turn off the String ID display by removing (or commenting out) the line "res.format=2" from the newscale.properties, RequestCenter.prop and RmiConfig.prop files
    7. Restart RequestCenter.
    Your customized text should be displayed.

    I've recently come across this information and it was very helpful in changing some of the inline text.
    However, one place that seemed out of reach with this method was the three main buttons on an "Order" page.  Specifically the "Add & Review Order" button was confusing some of our users.
    Through the use of JavaScript we were able to modify the label of this button.  We placed JS in the footer.html file that changes the value of the butt

  • How can I display on a string the symbol omega (ohms)

    how can I display on a string the symbol omega (ohms)

    Hi,
    See there : http://exchange.ni.com/servlet/ProcessRequest?RHIVEID=101&RPAGEID=135&HOID=50650000000800000032410000&UCATEGORY_0=_49_%24_6_&UCATEGORY_S=0
    Hope this helps !
    Julien

Maybe you are looking for