An app to make my windows go back to a set size when I connect my monitor?

This might be an odd request, but is there an application to make my windows go back to a set size whenever I connect my 22" monitor or when I disconnect and use the 13" screen? There is a lot of "overhang" when I disconnect, and the windows are tiny when I go back to the 22". It could save me a lot of trouble, and I would use my MacBook a lot more than just on my desk.
I have basic knowledge around AppleScript, so maybe that could be a solution.
Thanks in advance!
-Joe

What will not go on the iPod? The app? The tones?
Are the Tones in the Tone library in your iTunes library?
Did you check the tones to sync to your iPod?
Do the tones play i iTunes?

Similar Messages

HT4859 i have setup an ipad without connecting to computer, i am now connecting for first time to itunes it asks if i want to set up as new ipad or restore from previous backup (my iphone not ipad), i have backed ipad up to icloud when i connect back to i

i have set up my wifes ipad mini wirelesly, i am now connecting for first time to itunes it asks if i want to set up as new ipad or restore from previous backup (my iphone not ipad), i have backed ipad up to icloud when i connect back to itunes will it give me an option to restore from icloud, i dont want to lose the apps and data my wife has already installed through her account... any thoughts

1. set up as new
2. transfer you wife's purchases.
3. Just in case create one computer back up manually.
Enjoy.

How can i restore my iphone which was erased by iCloud?? I got my phone back but it wont work when i connect to iTunes.

How can i restore my iphone which was erased by iCloud?? I got my phone back but it wont work when i connect to iTunes.

The following assumes you've been backing up to icloud all along.
http://support.apple.com/kb/HT1766?viewlocale=en_US&locale=en_US
Go to Settings>General>Reset and tap Erase All Content and Settings. This will erase your device. Then you will go through the setup screens again as you did when your device was new, and when given the option, select Restore from iCloud Backup.
Let us know if this method does not work.

I had to get a new iphone and want to know how to tell if my pictures from my previous phone were backed up on itunes. when i connect my c even if i'm going from a 4 to a 5s?

i had to get a new iphone and want to know how to tell if my pictures from my previous phone were backed up on itunes. when i connect to itunes, does it automatically sync / backup even if i'm going from a 4 w/IOS 6 to a 5S w/IOS 7?

Welcome to the Apple Community.
Yes you can probably delete the 2 incomplete back ups they are unlikely to work.
However, I'd be inclined to back up to a computer as well and restore from there, if you are changing your phone.

I have just backed up my iPhone5 but when I connected my new iPhone5s the back-up wasn't listed as an option to restore? Where can I find the most recent back-up?

I've back-up the iPhone 5 several times now then connected the iPhone 5s but the back-up isn't listed. In fact the most recent back-up available is Nov 2013 but I've been backing up each fortnight.

If the 5S is already active, you will not see the backup for another device. You will need to erase the 5S back to factory default, and when prompted during the setup, choose restore from backup instead of setup as new.

How can I make a window show up in every desktop?

How can I make a window show up in every desktop so when a user switches views it's still on their screen, using Xcode, Applescript-ObjC?

hi, try this:
public static void centerWindow(Window win){
Dimension screenSizeWithSpeedBar = Toolkit.getDefaultToolkit().getScreenSize();
Dimension screenSize = new Dimension(screenSizeWithSpeedBar.width,screenSizeWithSpeedBar.height-25);
Dimension frameSize = win.getSize();
if (frameSize.height > screenSize.height)
frameSize.height = screenSize.height;
if (frameSize.width > screenSize.width)
frameSize.width = screenSize.width;
win.setSize(frameSize);
win.setLocation((screenSize.width - frameSize.width) / 2, (screenSize.height - frameSize.height) / 2);
It works with following arguments: JWindow, JFrame and JDialog

Why App Server Deosn't Start When Internet Connection is On

I have installed PeopleSoft FSCM 9.1 and Tootls 8.52 on my laptop and I can work with the application without any issues when internet is disconnected from my laptop (starting web server, app server, process scheduler and working with tools and application is fine) but app server doesn't start and I cannot work with application when internet connection is on. Any suggestions would be appreciated.

I had the same problem on my laptop with tools 8.50. I solved it by creating an entry in my local HOSTS file that represented my local PC (ie 127.0.0.1) and then used this new hostname in all my peoplesoft configuration.
AS to why it does this.... I never investigated.... but this for me at least did clear up this issue.
good luck
Graham

How do I make Photoshop the default Edit App for .jpg in Windows 7?

How do I make Photoshop the default Edit App for .jpg in Windows 7?    I want to be able to right click on a .jpg file, select the EDIT option in the Context Menu, then have Photoshop edit the file instead of Paint.
In Windows XP it was very easy to use the File Manger to associate the file type .jpg and action edit with Photoshop.    No so easy in Windows 7. It is easy to change the default OPEN application, but I would like to leave Windows Viewer as the default OPEN application and have Photoshop as the EDIT applicaiton.

Before I posted the original question here, I had probably spent a couple of hours trying to research it.   I hate to find no answer for something I know can be done.   So I spent some more time and found the following in the bowels of a Tech Forum that is generally way over my head. I have modified it to be Photoshop specific.
These instructions will update the default EDIT action for image types - jpg,png,gif and the variations.     If you are unfamiliar with editing the program registry you probably will want to back up your registry or take a system backup.
1. Open up the registry editor (Regedit.exe).
You will need to be signed on as a Windows user that is an administrator
2. Find HKEY_CLASSES_ROOT -> SystemFileAssociations -> image -> shell -> edit -> command
This seems like it would be easy but it is not, because there are many key names that are very close (like System.FilesAssociations).   Keep looking because you will find it eventually.
3. Double click on "Default" (on right window pane) and update the program location.
You should see that MSPAINT.EXE is the current program.
Erase the existing value and enter you photoshop location in quotes followed by %1 in quotes. For me this is "C:\Program Files (x86)\Adobe\Adobe Photoshop CS4\Photoshop.exe" "%1"
Hit return.
4. Exit Regit and test.

TS3212 Just attempted to download current update of Itunes into my HP windows 7 computer. I've never had trouble before but now it will not run. Runtime Error R6034 an app has make an attempt to load the C runtime library incorrectly. Itunes Error 7

Just attempted to download current update of Itunes into my HP computer with Windows 7. I've never had trouble before but now it will not run. Runtime Error R6034 an app has make an attempt to load the C runtime library incorrectly. Itunes Error 7

Click here and follow the instructions. You may need to completely remove and reinstall iTunes and all related components, or run the process multiple times; this won't normally affect its library, but that should be backed up anyway.
(99714)

On my Mac desktop I must have changed a setting so that now when I move the mouse the open windows fly off to the sides and I can't see them. They come back when I move the mouse, but it is so annoying. How can I make the windows not disappear like that?

On my Mac desktop I must have changed a setting so that now when I move the mouse the open windows fly off to the sides and I can't see them. They come back when I move the mouse, but it is so annoying. How can I make the windows not disappear like that?

Click on the Hot Corners.. button and look at the four definitions. In the picture below, if you moved the cursor to the right top of the screen, it would slide all the applications off the screen as you describe and show the desktop. Set it to "-" to deactivate.

Terminal.app won't return window to default size with open tab

I regularly have multiple Terminal.app windows open with multiple tabs open in them. If I have a window open with no tabs, I can drag scale the window to whatever size is convenient for me at the moment, then use the Window > Return to Default Size function to make it go back to my default size configured in the app preferences.
The problem comes when I have a window open that is already scaled to a different size and I open a tab. This resets the default size to whatever size the window was when the tab was opened. The result is that if I use the Window > Return to Default Size function, it does nothing, unless the window has been scaled again, then it resets the window size to what it was when the tab was opened, not the default size configured in my preferences.
Is this a feature, or a bug? Is there a way I can make it retain the default size dimensions even when I've opened a tab?

I would solve the problem by resizing after closing the added tab. However, your inquiry is really beyond my abilities. Questions do get answered in these forums; sometimes not, in which case resorting to Apple Support _may_ resolve the issue. Have you checked out posting under "Mac OS X Technologies"? I believe there are Unix sections to that forum. Good luck.

Opening App in own new Window - Opinions please

Dear Community!
I would like to invite you to share your opinions on this idea - foremost in terms of user experience, but also technical implementation:
Like anybody I always have a number of browser-tabs open, but as an apex user (not developer) I probably have only one apex-app running. So my ideea was, to give the user a stronger experience of working with an Application rather than a website, and therefore open the app in a new window.
Once in a new window all apex functionalities, navigation etc. work as usual. Only the user can concentrate more on the content and is not distracted by all the other browserstuff around. (After all it's not just "some web site"... ) Also he has full independent controll over the window.
I have build this in a test scenario and invite you to try everything out.
With a cookie-controlled checkbox the user can determine, wether he wants it in the first place or not. (Then once allow popups for this site.)
Now it gets weird:
I want deeplinking to be possible, so the functionality for the opening process in contained in the page template.
Also I want, when the user accidentally or willingly returns to the initial browser, and the new window comes out of sight, there should be a button to bring that window back to the front.
For that, javascript has to store the window object on the page, that opened the new one, so it should stay active. But since to user "doesn't want to use" that "old" window in the browser tab, I have created an overlay region, to cover that entire page up - on the condition, that a new window is beeing opened. Just be feeling this is probably a pretty weird solution, but its working so far (see example above).
Javascript on every page::
var newwindow;
$(function(){
// when app-page is opened the first time, open new window. after that P0OPEN will be empty:
if ($v('P0OPEN') === 'Y') {
    var href = 'f?p=&APP_ID.:&APP_PAGE_ID.:&APP_SESSION.::::P0OPEN:',
        winw= window.innerWidth, winh = window.innerHeight;
    // cosmetics for positioning etc.
    var options = 'scrollbars=yes, width='+(winw*.8)+', height='+(winh*.8)+', top='+(winh*.1)+', left='+(winw*.1)
    newwindow = window.open(href, '_blank', options);
    // the button to bring the new window back to the front:
    $('#P0BTNFOCUSW').click(function(){
       if (newwindow && !newwindow.closed) {
           setTimeout(function(){ newwindow.focus(); },100) ;
       } else {
           // if window was closed, start new session:
           window.redirect('&LOGOUT_URL.');
Maybe its better to have an extra page just for that purpose, but how can I combine that with deeplinking AND the necessity to store the javascript-window-object?
Another problem unsolved is, that when the user logs out in the new window, that should certailnly disapear. Also, in that case: the window open in the initial tab should change too, that is: redirect to the login screen.
And probably there are a few more things to be considered...
So I will be very glad to hear all your oppinions and suggestions of any kind.
Thanks and greetings,
Tobi
(omg!! how can you get the formating for code??) (ok, thanks...)

Well, nothing wrong with trying and experimenting of course! It'd be interesting to have things react a bit more as a desktop app, but there is not really enough power to do so and that is mostly because of security reasons. Just like the popupblocker. Personally I'd rather not have to tell anyone to fiddle with a (any!) popupblocker. I think you can have a good looking 'app' without it though, and design (or, UI) helps a lot in that regard. I don't mean to place Google on a pedestal here, but I like the simplicity of the browser splashscreen for example. "Here are your app links. Want to open one? Cool, right away!". Want multiple? No issue, hold ctrl and click away. That's just plain basic browser usage and it leaves me the option. They could've also placed the target=blank tag in their anchors, but they didn't. And that's fine.
I wouldn't necessarily make it more complex than that though - like with auto-popup screens after a login, screening of a window from interaction, dealing with deeplinks.
I've seen some nice "app"-approaches for apex. I think the coolest are where there is a master app, with icons which open up the other applications. The authentication cookie is shared, the authentication scheme is subscription based. You can deeplink apps but if you don't have a deeplink you go to the splashscreen.
If you deeplinked then you meant to go there, and not first the splash which pops up something else. If you want to go there then there is a button in each app which will open up the splash app (and if you add target blank in there, in a new window).
I'd say there is a lot of room for innovation, and anything web is possible. But be careful with those things like popupblockers
And It's just one opinion of course. I'm sure there are wildly differing ones out there. (Who don't react) You could always try some more UX-UI oriented forums for some feedback in this regard!

Multiple accounts in ichat- can you make all windows come up

If you have more than one account using ichat (mobile me, and aim account, etc), and you close the buddy lists. Whenever you click on the ichat icon in the dock, only one buddy list comes back up. Is there a way to make all of the active ones come up instead of just the one? I am assuming the one that comes up is which ever one you have in the preferences listed first under accounts.

Hi,
Welcome to the  Discussions
Nope that will not do It either.
Neither will enabling the Menu Bar icon and choosing to Show AIM or Show Jabber names.
The Quickest way seems to be holding down the Command key and hitting as many numbers as you have Buddy Lists (See Window Menu).
What we are talking about here is Opening iChat and having the Buddy List Logged in then Using the Red (Close) Button top left of the Buddy List.
In some apps with only one window this will Quit the app as well.
In iChat it "hides" the Buddy List.
The Window Menu lists Keystrokes as well as options to bring a Window to the Front (The KeyStrokes being CMD and a Number key together).
There is no way to Bring them All back at once
Another option is to use the iChat Menu and "Hide iChat" as this also hides the Buddy Lists (However you lose the option to see the Menu bar for iChat)
The Upside is that All Buddy Lists come back together on clicking the Icon in the Dock.
The Login Automatically is in the Accounts > Account Info tab and "At User Login, Set Status to Available" which is also useful is in the General Section.
9:18 PM Sunday; December 12, 2010
Please, if posting Logs, do not post any Log info after the line "Binary Images for iChat"

When I connect my iphone to the laptop (windows) it makes a sound but i can't see it in itunes or "my computer' I have no idea why....

When I connect my iphone to the laptop (windows) it makes a sound but i can't see it in itunes or "my computer' I have no idea why....

Setting up your phone "as new iphone" is covered in this article: http://support.apple.com/kb/HT4137
Before you connect to a new PC, make sure that autosync is disabled in Edit/Preferences/Devices, otherwise your phone will be wiped during the following sync.
If you have data on the phone you want to save, back up manually:
Disable autosync in iTunes, connect your phone to your new computer and right click on it in the device list and choose backup. iTunes will backup your phone without syncing. Transfer your purchases the same way, choosing "transfer purchases" this time.
When you connect your phone for the first time, all media content will be erased. But you can restore your settings and app data from your manual backup afterwards. Don't forget to set up at least one contact and event on your new computer to be able to merge calendars and contacts when you sync the phone for the first time.
Since changing your iTunes library will erase your phone again, do the same process when you change back to your normal PC.
About backups and what's saved:http://support.apple.com/kb/HT1766
How to back up and restore:http://support.apple.com/kb/HT1414
How to download apps for free again:http://support.apple.com/kb/HT2519

Unable to transfer purchased apps from iphone to window 7

I tried all the solution which been offered from apple support but i still unable to transfer purchased apps from iphone to window 7. Please show me what to do =(

Are you trying to transfer apps to Windows 7 to USE them on Windows 7, or to back up your iPhone? iPhone apps will not run on Windows (OR Mac OS X); they only run on the iPhone, iPod Touch, and iPad.
To back up your iPhone, connect the phone to your computer using the cable that came with the phone and a USB port directly on the computer, not a hub. Do not sync.
Check the account you have on your iPhone by going to Settings/Store. Make sure you are logged in to this same account on your computer, and that the computer is Authorized to this account (check the Store menu).
Go to the File Menu in iTunes and choose "Transfer Purchases".
If you have a problem with any of these steps please let us know exactly what the problem is.

An app to make my windows go back to a set size when I connect my monitor?

Similar Messages

Maybe you are looking for