An error occurred within the report server database. This may be due to a connection failure, timeout or low disk condition within the database. mail will not be sent.

Hii all,
I have a subscription which used to send report email daily 10 am morning
now today it does not sent an email the status i s showing above error message ..
why this occurs ?? at the time of subscription running time ??
i have checked there is not error of subscription it runs fine ..
only today errored ..
Kindly , help me
Dilip Patil..

Hi Dilip,
Based on the error message "An error occurred within the report server database. This may be due to a connection failure, timeout or low disk condition within the database." it seems the issue is caused by the Report Server catalog databases are
corrupted.
To fix this issue, I suggest that you use the Reporting Services Configuration Manager to recreate the Report Server catalog databases. In addition, please make sure report server instance can connect to the report server database. For more details about Configure
a Report Server Database Connection (SSRS Configuration Manager), please see the following document:
http://msdn.microsoft.com/en-IN/library/ms159133.aspx
Besides, if the issue is caused by the connection to the SQL Server Reporting Services Report Server catalog database is timeout. Please refer to the following thread:
http://social.technet.microsoft.com/Forums/en-US/db4ca6c2-5445-4ff9-9f63-e20f3859cc70/error-throwing-microsoftreportingservicesdiagnosticsutilitiesreportserverstorageexception-an?forum=sqlreportingservices
If the problem is still existed, I would appreciate it if you could give us detailed error log, it will help us move more quickly toward a solution.
Thanks,
Katherine Xiong
Katherine Xiong
TechNet Community Support

Similar Messages

SSRS 2008R2 Error: An error occurred within the report server database. This may be due to a connection failure, timeout or low disk condition within the database

Hi,
a big problem with our report server has appeared suddenly.
We are running the SQL Server 2008 R2 with a Report Server. But a .
I can connect to the Report Server Website and I can choose a report. But if I run the report, it will load endless without timeout message or other error messages.
I looked in the Report Server Log and find out this confusing error messages:
rshost!rshost!1680!01/21/2014-16:22:41:: e ERROR: WriteCallback(): failed to write in write callback.
rshost!rshost!1680!01/21/2014-16:22:41:: e ERROR: Failed with win32 error 0x0079, pipeline=0x00000000004ED8D0.
rshost!rshost!c20!01/21/2014-16:22:41:: e ERROR: HttpPipelineCallback::SendResponse(): failed async writing response.
rshost!rshost!c20!01/21/2014-16:22:41:: e ERROR: Failed with win32 error 0x0079, pipeline=0x00000000004ED8D0.
rshost!rshost!1680!01/21/2014-16:22:41:: v VERBOSE: HttpPipeline::DisconnectCallback: releasing pipeline=0x00000000004ED8D0.
httpruntime!ReportManager_0-1!c20!01/21/2014-16:22:41:: e ERROR: Failed in BaseWorkerRequest::SendHttpResponse(bool), exception=System.Runtime.InteropServices.COMException (0x80070079): The semaphore timeout period has expired. (Exception from HRESULT: 0x80070079)
at Microsoft.ReportingServices.HostingInterfaces.IRsHttpPipeline.SendResponse(Void* response, Boolean finalWrite, Boolean closeConn)
at ReportingServicesHttpRuntime.BaseWorkerRequest.SendHttpResponse(Boolean finalFlush)
library!ReportManager_0-1!c20!01/21/2014-16:22:41:: e ERROR: Throwing Microsoft.ReportingServices.Diagnostics.Utilities.ReportServerHttpRuntimeInternalException: RsWorkerRequest::FlushResponse., Microsoft.ReportingServices.Diagnostics.Utilities.ReportServerHttpRuntimeInternalException:
An internal or system error occurred in the HTTP Runtime object for application domain ReportManager_MSSQLSERVER_0-1-130347907277948893. ---> System.Runtime.InteropServices.COMException (0x80070079): The semaphore timeout period has expired. (Exception
from HRESULT: 0x80070079)
at ReportingServicesHttpRuntime.BaseWorkerRequest.SendHttpResponse(Boolean finalFlush)
at ReportingServicesHttpRuntime.RsWorkerRequest.FlushResponse(Boolean finalFlush)
--- End of inner exception stack trace ---;
httpruntime!ReportManager_0-1!c20!01/21/2014-16:22:41:: e ERROR: Failed in BaseWorkerRequest::SendHttpResponse(bool), exception=System.Runtime.InteropServices.COMException (0x80070079): The semaphore timeout period has expired. (Exception from HRESULT: 0x80070079)
at Microsoft.ReportingServices.HostingInterfaces.IRsHttpPipeline.SendResponse(Void* response, Boolean finalWrite, Boolean closeConn)
at ReportingServicesHttpRuntime.BaseWorkerRequest.SendHttpResponse(Boolean finalFlush)
library!ReportManager_0-1!c20!01/21/2014-16:22:41:: e ERROR: Throwing Microsoft.ReportingServices.Diagnostics.Utilities.ReportServerHttpRuntimeInternalException: RsWorkerRequest::FlushResponse., Microsoft.ReportingServices.Diagnostics.Utilities.ReportServerHttpRuntimeInternalException:
An internal or system error occurred in the HTTP Runtime object for application domain ReportManager_MSSQLSERVER_0-1-130347907277948893. ---> System.Runtime.InteropServices.COMException (0x80070079): The semaphore timeout period has expired. (Exception
from HRESULT: 0x80070079)
at ReportingServicesHttpRuntime.BaseWorkerRequest.SendHttpResponse(Boolean finalFlush)
at ReportingServicesHttpRuntime.RsWorkerRequest.FlushResponse(Boolean finalFlush)
--- End of inner exception stack trace ---;
The last think I have done, is to grant a new user access to the report server website (by using the site options) and to the root folder (by using the folder options on ws).
But the error must not relate to the new user. The server was not touched for several days before.
Could you plz help me? I have no idea what to do.
Googling the whole day to find a solution without success

We are having the same issue with our production reporting server and it doesn't look like a permission issue. We are running the SSRS service as a domain account with administrative privileges on the server. We are seeing the following entry in the log
file:
rshost!rshost!1254!01/30/2014-13:06:04:: e ERROR: WriteCallback(): failed to write in write callback.
rshost!rshost!1254!01/30/2014-13:06:04:: e ERROR: Failed with win32 error 0x0079, pipeline=0x0000000003484370.
rshost!rshost!1198!01/30/2014-13:06:04:: e ERROR: HttpPipelineCallback::SendResponse(): failed async writing response.
rshost!rshost!1198!01/30/2014-13:06:04:: e ERROR: Failed with win32 error 0x0079, pipeline=0x0000000003484370.
httpruntime!ReportManager_0-1!1198!01/30/2014-13:06:04:: e ERROR: Failed in BaseWorkerRequest::SendHttpResponse(bool), exception=System.Runtime.InteropServices.COMException (0x80070079): The semaphore timeout period has expired. (Exception from HRESULT: 0x80070079)
at Microsoft.ReportingServices.HostingInterfaces.IRsHttpPipeline.SendResponse(Void* response, Boolean finalWrite, Boolean closeConn)
at ReportingServicesHttpRuntime.BaseWorkerRequest.SendHttpResponse(Boolean finalFlush)
library!ReportManager_0-1!1198!01/30/2014-13:06:04:: e ERROR: Throwing Microsoft.ReportingServices.Diagnostics.Utilities.ReportServerHttpRuntimeInternalException: RsWorkerRequest::FlushResponse., Microsoft.ReportingServices.Diagnostics.Utilities.ReportServerHttpRuntimeInternalException:
An internal or system error occurred in the HTTP Runtime object for application domain ReportManager_0-1-130355206125382999. ---> System.Runtime.InteropServices.COMException (0x80070079): The semaphore timeout period has expired. (Exception from HRESULT:
0x80070079)
at ReportingServicesHttpRuntime.BaseWorkerRequest.SendHttpResponse(Boolean finalFlush)
at ReportingServicesHttpRuntime.RsWorkerRequest.FlushResponse(Boolean finalFlush)
SSRS version is 10.50.4270.0
Regards,
Augustine.

An error occurred within the report server database. This may be due to a connection failure, timeout or low disk condition within the database

Hello
We just had this error today. We did not do ANY changes to our existing ReportServer database neither to our reports.
Our infrastructure - we have sharepoint 2010 and sql server 2008 r2 with reporting services installed.
I confirmed the following:
-->Disk space on database server OK:
-->ReportServer database not corrupted - I restored the database to my test server and ran DBCC CheckDB.
I am now looking at the Activity Monitor and have noticed that several SPID executed by the ReportServer database are blocked by a SPID executed by the ReportServerTempDB.
Would blocking be a possible cause to this problem?
Thank you all in advance

Take a look into this http://support.microsoft.com/kb/2146315
Best Regards,Uri Dimant SQL Server MVP,
http://sqlblog.com/blogs/uri_dimant/
MS SQL optimization: MS SQL Development and Optimization
MS SQL Consulting:
Large scale of database and data cleansing
Remote DBA Services:
Improves MS SQL Database Performance
SQL Server Integration Services:
Business Intelligence

SSRS 2008: connection failure, timeout or low disk condition within the database. (rsReportServerDatabaseError)

Hi,
I have started getting this error since a week now when I try to schedule a report or change a schedule of a report.
An error occurred within the report server database. This may be due to a connection failure, timeout or low disk condition within the database. (rsReportServerDatabaseError) Get Online Help For more information about this error navigate to the report
server on the local server machine, or enable remote errors
We have SQL Server 2008 installed along with SSRS running on the server. I have never seen this happening before for almost a year now but suddenly it appeared. Along with this, report subscription is also messed up and some report are not been
emailed as they have a error like:
Failure sending mail: An error occurred within the report server database. This may be due to a connection failure, timeout or low disk condition within the database.Mail will not be resent.
I am not sure what caused this but if anyone has any idea of what is going on it will be great.
Thanks you for your help.
Please reply soooon !!!

Rich, hi, sorry for my english but I speak spanish...
Well, I was tried to recreate this issue and is really hard to recreate, however and as a rain from the sky, one of my customers receive the same error that you have, reviewing Windows Logs and SQL Traces there is nothing.
Just for discard security issues I decide to change permissions in my server.
1. Go to SQL Server Reporting Services Configuration Manager
2. Go to Databases
3. Verify the credentials used to connect to the database server
4. Go to your database server
5. Look for the login or user that is being used to connect to the database server from SSRS
6. Change the role of that user and convert it to Sysadmin (Relax, this is not the final solution)
7. Try again (Is not necesary to restart ANYTHING)
8. Now, your SSRS and Subscriptions must work fine
9. If your SSRS and subscriptions are working ok, you have to give some permissions to the user
10. Grant execute permissions on
master.dbo.xp_sqlagent_notify
master.dbo.xp_sqlagent_enum_jobs
master.dbo.xp_sqlagent_is_starting
msdb.dbo.sp_help_category
msdb.dbo.sp_add_category
msdb.dbo.sp_add_job
msdb.dbo.sp_add_jobserver
msdb.dbo.sp_add_jobstep
msdb.dbo.sp_add_jobschedule
msdb.dbo.sp_help_job
msdb.dbo.sp_delete_job
msdb.dbo.sp_help_jobschedule
msdb.dbo.sp_verify_job_identifiers
11. Grant select permissions on
msdb.dbo.sysjobs
msdb.dbo.syscategories
12. Grant public role to the user in the MSDB and Master DB
13. Remove the Sysadmin role to the user
14. Try again, now, your SSRS is ready to work
Regards
Pls let me know if work for you
Regards | John Bocachica | jboca.blogspot.com

NLB Error: NLB detected duplicate cluster subnets. This may be due to network partitioning

We're running two servers in a datacentre, call them WEB1 and WEB2 in unicast NLB mode.
Each server has a public NIC, the NLB adapter and a private NIC for communication between hosts. We have a VLAN between the public NICs so the cluster IP is routed to both hosts. I can access the Virtual IP just fine, and hosts can talk on the separate private
network. The public NICs are connected up to a Cisco switch with a VLAN between two ports, one for WEB1 and one for WEB2 (all done by the datacentre).
Intermittently on WEB2, I lose connection from my local machine and the Event Logs show multiple:
NLB cluster []: NLB detected duplicate cluster subnets. This may
be due to network partitioning, which prevents NLB heartbeats of one or more
hosts from reaching the other cluster hosts. Although NLB operations have
resumed properly, please investigate the cause of the network partitioning.
WEB1 works just fine and doesn't suffer from these issues. Removing WEB2 from the NLB cluster leaves everything working fine (with just the single WEB1 left).
Perhaps unrelated but for WEB1 & WEB2, the interface metric for the private NIC is 10 while the public NIC is 20 (although 'route print' shows much higher values around 270-300). [seems this is correct according to http://blogs.technet.com/b/tristank/archive/2004/06/08/150734.aspx]
Really hoping someone can help as NLB seems a great solution!
Thanks ever so much

Hi, no luck with this I'm afraid. Both NICs are configured the same, not sure what you mean by the NIC binding order. Cabling is definitely fine.
We're just sticking it out. As this is running on a live set up I had to get things working so put the NLB cluster into Single Host mode with WEB1 as the default host. This meant traffic worked fine while I still had frequent disconnections to WEB2.
After about 24 hours, the error stopped. When anything changes the cluster, ie one of the servers is restarted for updates, it does this error for about 24 hours then settles down.
I have no idea if the Single Host mode is helping this or not - perhaps it just takes 24 hours for it to settle down. Would it also settle down if I wasn't in Single Host mode? No idea and won't try it as its a live set up. Is NLB working properly? Most
probably not! However if WEB1 dies, WEB2 does take over connections all itself and works fine till WEB1 comes back online (requests go back to WEB1) and WEB2 starts to disconnect for the roughly 24 hours.
Anyone from the Microsoft Networking team able to shed any light on this? Please?

An internal error occurred on the report server. See the error log for more details. (rsInternalError) Get Online Help The profile for the user is a temporary profile. (Exception from HRESULT: 0x80090024)

An internal error occurred on the report server. See the error log for more details. (rsInternalError) Get Online Help The profile for the user is a temporary profile. (Exception from HRESULT: 0x80090024)
while proview the report i will get this error am using sql server 2008R2,
can u plesae hlep me out for this

<Header>
<Product>Microsoft SQL Server Reporting Services Version 2009.0100.1600.01 ((KJ_RTM).100402-1539 )</Product>
<Locale>English (United States)</Locale>
<TimeZone>W. Europe Standard Time</TimeZone>
<Path>C:\Program Files\Microsoft SQL Server\MSRS10_50.MSSQLSERVEREPORT\Reporting Services\Logfiles\ReportServerService__01_30_2015_03_09_32.log</Path>
<SystemName>WEGDACM1</SystemName>
<OSName>Microsoft Windows NT 6.1.7601 Service Pack 1</OSName>
<OSVersion>6.1.7601</OSVersion>
<ProcessID>4880</ProcessID>
<Virtualization>Hypervisor</Virtualization>
</Header>
rshost!rshost!5e4!01/30/2015-03:09:32:: i INFO: Currently registered url http://+:80/ReportServer_MSSQLSERVEREPORT/ on endpoint 2
rshost!rshost!5e4!01/30/2015-03:09:32:: e ERROR: Failed to register url=http://+:80/Reports/ for endpoint 3, error=b7.
rshost!rshost!5e4!01/30/2015-03:09:32:: w WARN: Endpoint 3 is enabled but no url is registered for vdir=/Reports, pdir=C:\Program Files\Microsoft SQL Server\MSRS10_50.MSSQLSERVEREPORT\Reporting Services\ReportManager.
servicecontroller!DefaultDomain!1e30!01/30/2015-03:09:32:: e ERROR: Error creating HTTP endpoint. System.Runtime.InteropServices.COMException (0x800700B7): Cannot create a file when that file already exists. (Exception from HRESULT: 0x800700B7)
at Microsoft.ReportingServices.HostingInterfaces.IRsUnmanagedCallback.CreateHttpEndpoint(RsAppDomainType application, String[] urlPrefixes, Int32 cPrefixes, String[] hosts, Int32 cHosts, Boolean wildCardPresent, String virtualDirectory, String
filePath, Int32 authType, Int32 logonMethod, String authDomain, String authRealm, Boolean authPersist, Int32 extendedProtectionLevel, Int32 extendedProtectionScenario, Boolean enabled)
at Microsoft.ReportingServices.Library.ServiceAppDomainController.SetWebConfiguration(RunningApplication rsApplication, Boolean enabled, String folder)
rshost!rshost!65c!01/30/2015-03:09:32:: i INFO: Endpoint 4 is disabled and no url is registered vdir=/ReportServer_MSSQLSERVEREPORT/ReportBuilder, pdir=C:\Program Files\Microsoft SQL Server\MSRS10_50.MSSQLSERVEREPORT\Reporting Services\ReportServer\ReportBuilder.
rshost!rshost!1e30!01/30/2015-03:09:32:: i INFO: Derived memory configuration based on physical memory as 16776696 KB
servicecontroller!DefaultDomain!1e30!01/30/2015-03:09:32:: i INFO: Recycling the service from the default domain
rshost!rshost!1e30!01/30/2015-03:09:46:: i INFO: Application domain type WindowsService statistics: created: 7, unloaded: 7, failed: 0, timed out: 0.
appdomainmanager!DefaultDomain!1e30!01/30/2015-03:09:46:: i INFO: Appdomain:11 WindowsService_7 started.
library!WindowsService_7!1e30!01/30/2015-03:09:46:: e ERROR: Throwing Microsoft.ReportingServices.Diagnostics.Utilities.ServerConfigurationErrorException: No DSN present in configuration file, Microsoft.ReportingServices.Diagnostics.Utilities.ServerConfigurationErrorException:
The report server has encountered a configuration error. ;
servicecontroller!WindowsService_7!1e30!01/30/2015-03:09:46:: e ERROR: Error initializing configuration from the database: Microsoft.ReportingServices.Diagnostics.Utilities.ServerConfigurationErrorException: The report server has encountered a configuration
error.
resourceutilities!WindowsService_7!1e30!01/30/2015-03:09:47:: i INFO: Reporting Services starting SKU: Enterprise
servicecontroller!WindowsService_6!1e30!01/30/2015-03:09:47:: i INFO: Service controller exiting.
appdomainmanager!DefaultDomain!1e30!01/30/2015-03:09:47:: i INFO: Appdomain:10 unregistered.
appdomainmanager!DefaultDomain!1e30!01/30/2015-03:09:47:: i INFO: Appdomain:10 WindowsService_6 unloading.
appdomainmanager!DefaultDomain!1f40!01/30/2015-03:09:47:: i INFO: AppDomain:10 0 pending unload(s)
library!WindowsService_7!2410!01/30/2015-03:09:47:: e ERROR: Throwing Microsoft.ReportingServices.Diagnostics.Utilities.ServerConfigurationErrorException: No DSN present in configuration file, Microsoft.ReportingServices.Diagnostics.Utilities.ServerConfigurationErrorException:
The report server has encountered a configuration error. ;
library!WindowsService_7!2410!01/30/2015-03:09:47:: e ERROR: ServiceStartThread: Exception caught while starting service. Error: Microsoft.ReportingServices.Diagnostics.Utilities.ServerConfigurationErrorException: The report server has encountered a configuration
error.
library!WindowsService_7!2410!01/30/2015-03:09:47:: e ERROR: ServiceStartThread: Attempting to start service again...
library!DefaultDomain!202c!01/30/2015-08:04:43:: e ERROR: Throwing Microsoft.ReportingServices.Diagnostics.Utilities.ServerConfigurationErrorException: No DSN present in configuration file, Microsoft.ReportingServices.Diagnostics.Utilities.ServerConfigurationErrorException:
The report server has encountered a configuration error. ;
library!DefaultDomain!202c!01/30/2015-08:25:26:: e ERROR: Throwing Microsoft.ReportingServices.Diagnostics.Utilities.ServerConfigurationErrorException: No DSN present in configuration file, Microsoft.ReportingServices.Diagnostics.Utilities.ServerConfigurationErrorException:
The report server has encountered a configuration error. ;
library!DefaultDomain!202c!01/30/2015-08:26:16:: e ERROR: Throwing Microsoft.ReportingServices.Diagnostics.Utilities.ServerConfigurationErrorException: No DSN present in configuration file, Microsoft.ReportingServices.Diagnostics.Utilities.ServerConfigurationErrorException:
The report server has encountered a configuration error. ;
The above is my log file pls find it resolve my problem,am trying to add the encryption key to my configuration seetings it will through the error like The profile you were used is temporary profile.

WMIProviderException: An error occurred when attempting to connect to the report server remote procedure call (RPC) end point

I am getting the following error message while trying to configure a database for a Reporting Service Server. Both SQL Server and Reporting server are 2012 named instances. I have 2014 instances as well on the same server.
Exception details...
Microsoft.ReportingServices.WmiProvider.WMIProviderException: An error occurred when attempting to connect to the report server remote procedure call (RPC) end point. Verify that the Report Server Windows service is running, and then retry the operation.
---> System.Runtime.InteropServices.COMException (0x800706B3): The RPC server is not listening. (Exception from HRESULT: 0x800706B3)
   --- End of inner exception stack trace ---
   at Microsoft.ReportingServices.WmiProvider.RSWmiAdmin.ThrowOnError(ManagementBaseObject mo)
   at Microsoft.ReportingServices.WmiProvider.RSWmiAdmin.GenerateDatabaseScript(String databaseName, Int32 lcid, Boolean isSharePointIntegrated, String& script)
   at ReportServicesConfigUI.WMIProvider.RSReportServerAdmin.GenerateDatabaseScript(String databaseName, Int32 lcid, Boolean isSharePointIntegrated, String& script)
Can someone help me on this please?

Hi Jaigi,
According to your description, you want to change a report server database for Reporting Services. But it fails on the last step and returns a error. Right?
In this scenario, it seems you are creating a report server database on another server via remote connection. Based on the error message, it has issues on executing the script for generating new database. Please check if you have permission to connect the
server and create a new database. Also please check if the Reporting Services Windows services is working properly.
If you have any question, please feel free to ask.
Best Regards,
Simon Hou

SQL reporting - An internal error occurred on the report server. See the error log for more details. (rsInternalError)

I have created an RDL file programatically. When I execute the code I get the error as mentioned below:
Error: Sub report cannot be shown.
An internal error occurred on the report server. See the error log for more details. (rsInternalError)
When I copy and paste the code of RDL file into new RDL file and try to preview the output I get correct result.
Note: The new RDL file does not give any error if the output is seen using preview tab but it gives the error only when executed from report viewer or from internet explorer.
Any Suggestion/feedback is highly appreciated.
Thank You.
The code of the sample RDL is shown below:
<?xml version="1.0" encoding="utf-8"?>
<Report xmlns="http://schemas.microsoft.com/sqlserver/reporting/2005/01/reportdefinition" xmlns:rd="http://schemas.microsoft.com/SQLServer/reporting/reportdesigner">
<DataSources>
    <DataSource Name="DataSource1">
      <DataSourceReference>DataSource1</DataSourceReference>
      <rd:DataSourceID>fe4806ee-0358-4a87-b764-ac5de049545e</rd:DataSourceID>
    </DataSource>
</DataSources>
<BottomMargin>0.25in</BottomMargin>
<RightMargin>0.25in</RightMargin>
<PageWidth>11in</PageWidth>
<ReportParameters>
    <ReportParameter Name="machine_id">
      <DataType>String</DataType>
      <Prompt>machine_id</Prompt>
    </ReportParameter>
    <ReportParameter Name="from_date">
      <DataType>String</DataType>
      <AllowBlank>true</AllowBlank>
      <Prompt>From Date</Prompt>
    </ReportParameter>
    <ReportParameter Name="to_date">
      <DataType>String</DataType>
      <AllowBlank>true</AllowBlank>
      <Prompt>To Date</Prompt>
    </ReportParameter>
</ReportParameters>
<rd:DrawGrid>true</rd:DrawGrid>
<InteractiveWidth>8.5in</InteractiveWidth>
<rd:SnapToGrid>true</rd:SnapToGrid>
<Body>
    <ReportItems>
      <Table Name="table1">
        <DataSetName>Main_Report</DataSetName>
        <TableGroups>
          <TableGroup>
            <Header>
              <TableRows>
                <TableRow>
                  <TableCells>
                    <TableCell>
                      <ReportItems>
                        <Textbox Name="textbox2">
                          <rd:DefaultName>textbox2</rd:DefaultName>
                          <ZIndex>1</ZIndex>
                          <Style>
                            <TextAlign>Left</TextAlign>
                            <PaddingLeft>2pt</PaddingLeft>
                            <PaddingBottom>2pt</PaddingBottom>
                            <PaddingRight>2pt</PaddingRight>
                            <PaddingTop>2pt</PaddingTop>
                          </Style>
                          <CanGrow>true</CanGrow>
                          <Value>=Fields!syscode.Value</Value>
                        </Textbox>
                      </ReportItems>
                    </TableCell>
                  </TableCells>
                  <Height>0.25in</Height>
                </TableRow>
              </TableRows>
              <RepeatOnNewPage>true</RepeatOnNewPage>
            </Header>
            <Grouping Name="table1_Group1">
              <PageBreakAtEnd>true</PageBreakAtEnd>
              <GroupExpressions>
                <GroupExpression>=Fields!syscode.Value</GroupExpression>
              </GroupExpressions>
            </Grouping>
          </TableGroup>
        </TableGroups>
        <Details>
          <TableRows>
            <TableRow>
              <TableCells>
                <TableCell>
                  <ReportItems>
                    <Subreport Name="subreport1">
                      <Parameters>
                        <Parameter Name="machine_id">
                          <Value>=Fields!machine_ip.Value</Value>
                        </Parameter>
                        <Parameter Name="syscode">
                          <Value>=Fields!syscode.Value</Value>
                        </Parameter>
                        <Parameter Name="from_date">
                          <Value>=Parameters!from_date.Value</Value>
                        </Parameter>
                        <Parameter Name="to_date">
                          <Value>=Parameters!to_date.Value</Value>
                        </Parameter>
                      </Parameters>
                      <ReportName>Holding_Summary_Multi_Period</ReportName>
                    </Subreport>
                  </ReportItems>
                </TableCell>
              </TableCells>
              <Height>0.25in</Height>
            </TableRow>
          </TableRows>
        </Details>
        <TableColumns>
          <TableColumn>
            <Width>10.5in</Width>
          </TableColumn>
        </TableColumns>
        <Height>0.5in</Height>
      </Table>
    </ReportItems>
    <Height>0.75in</Height>
</Body>
<rd:ReportID>d0a1293a-e98c-4f75-9597-03426d2e7218</rd:ReportID>
<LeftMargin>0.25in</LeftMargin>
<DataSets>
    <DataSet Name="Main_Report">
      <Query>
        <rd:UseGenericDesigner>true</rd:UseGenericDesigner>
        <CommandText>select account_syscode as syscode , 'display Name' as display_name , * from mars_customer_list
where machine_ip = @machine_id</CommandText>
        <QueryParameters>
          <QueryParameter Name="@machine_id">
            <Value>=Parameters!machine_id.Value</Value>
          </QueryParameter>
        </QueryParameters>
        <DataSourceName>DataSource1</DataSourceName>
      </Query>
      <Fields>
        <Field Name="syscode">
          <rd:TypeName>System.Int64</rd:TypeName>
          <DataField>syscode</DataField>
        </Field>
        <Field Name="display_name">
          <rd:TypeName>System.String</rd:TypeName>
          <DataField>display_name</DataField>
        </Field>
        <Field Name="customer_syscode">
          <rd:TypeName>System.Int64</rd:TypeName>
          <DataField>customer_syscode</DataField>
        </Field>
        <Field Name="account_syscode">
          <rd:TypeName>System.Int64</rd:TypeName>
          <DataField>account_syscode</DataField>
        </Field>
        <Field Name="machine_ip">
          <rd:TypeName>System.String</rd:TypeName>
          <DataField>machine_ip</DataField>
        </Field>
      </Fields>
    </DataSet>
</DataSets>
<Code>Shared offset As Integer
Public Function GetPN(reset As Boolean, pagenumber As Integer) As Integer
If reset
    offset = pagenumber - 1
End If
Return pagenumber - offset
End Function
</Code>
<Width>10.5in</Width>
<InteractiveHeight>11in</InteractiveHeight>
<Language>en-US</Language>
<PageFooter>
    <ReportItems>
      <Image Name="image1">
        <Sizing>Fit</Sizing>
        <Left>8.875in</Left>
        <MIMEType />
        <Width>1.5in</Width>
        <Source>External</Source>
        <Style />
        <Value>bottom_right_logo.gif</Value>
      </Image>
    </ReportItems>
    <Height>0.5in</Height>
    <PrintOnLastPage>true</PrintOnLastPage>
    <PrintOnFirstPage>true</PrintOnFirstPage>
</PageFooter>
<TopMargin>0.5in</TopMargin>
<PageHeight>8.5in</PageHeight>
</Report>

i created a SSRS report with shared datasets and uploaded rdl files and rsd files , while trying to map rdl file with data sets i am getting an error
when i click on manage for .rdl file, its throwing error , as
"An internal error occurred on the report server. See the error log for more details. (rsInternalError)
Object reference not set to an instance of an object.
please help me with this

Reporting Services will not automatically use a different replica for the report server databases when a failover occurs. How to overcome this issue

Reporting Services offers limited support for using AlwaysOn Availability Groups with report server databases. The report server databases can be configured in AG to be part of a replica; however Reporting Services will not automatically use a different
replica for the report server databases when a failover occurs. How to overcome this issue? is there any workaround for that..
Rahul

Hi.
With the AlwaysOn listener you should have a single DNS name to connect to regardless of which cluster node is active. Are you using the listener service? If not, please refer to the link below.
http://msdn.microsoft.com/en-us/library/hh213417.aspx#AGlisteners

Sporadic problem: The report server has encountered a configuration error. Logon failed for the unattended execution account.

I have 2 reports that have subscriptions. I am sporadically getting this error. If it was really a configuration problem then I think I should get the error every time. Does any one have any suggestions of
what to look for? I have not found any errors relating to this problem in the server logs.

Hi ClareD,
According to the error message, there is an unattended execution account specified on the report server. Based on my research, the issue always occurs when you are using incorrect login name and password. Such as the password expired. Please make sure you
set the correct login name and password.
Besides, please double check if the user has the following permission on the reporting service database server:
Public and RSExecRole roles for the ReportServer database.
RSExecRole role for the master, msdb, and ReportServerTempDB databases.
If he does not have the permission, please try to grant the proper permission first. For more information, please refer to the article:
http://technet.microsoft.com/en-us/library/ms159133.aspx
If there are any other questions, please feel free to ask.
Regards,
Katherine Xiong
Katherine Xiong
TechNet Community Support

Error: Unable to communicate with the Reports Server

The configuration I am working with is:
* Oracle 8.1.6 DB on a Unix machine
* Oracle Reports 6i on an NT machine
* Microsoft IIS web server
I have successfully tested my reports during the development phase of my project. Unfortunately, now that it is considered production and is available to upwards of 30 people, I am getting the following error message after verifying the server is up and after a numerous reports have been served:
Error: The requested URL was not found, or cannot be served at this time.
Oracle Reports Server CGI - Unable to communicate with the Reports Server.
After receiving this message I noticed that the Report Server service is down and the log only indicates that it "shut down immediately". (no ORA messages) I tried restarting the service, but after serving one report, it would shut down again with the same message.
I am wondering if it is a problem related to the cache. I used the default of 50M in the config file, but when the cache directory reaches 50M, the problem seems to appear. I then deleted approx. 30M of files from the cache directory and the Report Server service appeared stable. I changed the cache limit to 1M to see if there was a problem with the cache being so big. All appeared well for the first few hours of operation but then the Report Server service shut down again and upon restart crashed within a minute or two (usually as someone tests a report, it crashes again).
Do I have a configuration problem? Has anyone seen this problem? Thanks in advance.

Hi,
I just found out that if i give
http://localhost/cgi-bin/rwcgi60.exe?key1
where key1 is a key mapping file that contains the report name,username and pwd for the database and desformat...etc..
the report pulls out fine with the correct data..
i am stunned...
while none of the other commands like
http://.../rwcgi60.exe
or
http://..../showenv?server=repserver
or any other usual command doesnt work...
anybody faced this before??
Thanks.

The report server has encountered a configuration error. Logon failed for the unattended execution account. (rsServerConfigurationError) Log on failed. Ensure the user name and password are correct. (rsLogonFailed) Logon failure: unknown user name or bad

The report server has encountered a configuration error. Logon failed for the unattended execution account. (rsServerConfigurationError)
Log on failed. Ensure the user name and password are correct. (rsLogonFailed)
Logon failure: unknown user name or bad password
am using Windows integrated security,version of my sql server 2008R2
I have go throgh the different articuls, they have given different answers,
So any one give me the exact soluction for this problem,
Using service account then i will get the soluction or what?
pls help me out it is urgent based.
Regards
Thanks!

Hi Ychinnari,
I have tested on my local environment and can reproduce the issue, as
Vaishu00547 mentioned that the issue can be caused by the Execution Account you have configured in the Reporting Services Configuration Manager is not correct, Please update the Username and Password and restart the reporting services.
Please also find more details information about when to use the execution account, if possible,please also not specify this account:
This account is used under special circumstances when other sources of credentials are not available:
When the report server connects to a data source that does not require credentials. Examples of data sources that might not require credentials include XML documents and some client-side database applications.
When the report server connects to another server to retrieve external image files or other resources that are referenced in a report.
Execution Account (SSRS Native Mode)
If you still have any problem, please feel free to ask.
Regards
Vicky Liu
Vicky Liu
TechNet Community Support

SQL Server reporting server 2005 having error. 'The report server is not responding. Verify that report server is running and can be accessed from this computer'

Hi team,
I got below error message in SQL Server 2005 reporting service.
''The report server is not responding. Verify that report server is running and can be accessed from this computer'
also in reports, i am getting below error:
"The encrypted value for the "LogonCred" configuration setting cannot be decrypted. (rsFailedToDecryptConfigInformation)
Get Online Help
The report server has encountered a configuration error. See the report server log files for more information. (rsServerConfigurationError)
Get Online Help "
Please find below log:
<Header>
<Product>Microsoft SQL Server Reporting Services Version 9.00.4060.00</Product>
<Locale>en-US</Locale>
<TimeZone>Eastern Daylight Time</TimeZone>
<Path>F:\Program Files\Microsoft SQL Server\MSSQL.6\Reporting Services\LogFiles\ReportServer__07_28_2014_09_08_41.log</Path>
<SystemName>MFLDDDBS04</SystemName>
<OSName>Microsoft Windows NT 5.2.3790 Service Pack 2</OSName>
<OSVersion>5.2.3790.131072</OSVersion>
</Header>
w3wp!webserver!1!7/28/2014-09:08:41:: i INFO: Reporting Web Server started
w3wp!library!1!7/28/2014-09:08:41:: i INFO: Initializing ConnectionType to '1' as specified in Configuration file.
w3wp!library!1!7/28/2014-09:08:41:: i INFO: Initializing IsSchedulingService to 'True' as specified in Configuration file.
w3wp!library!1!7/28/2014-09:08:41:: i INFO: Initializing IsNotificationService to 'True' as specified in Configuration file.
w3wp!library!1!7/28/2014-09:08:41:: i INFO: Initializing IsEventService to 'True' as specified in Configuration file.
w3wp!library!1!7/28/2014-09:08:41:: i INFO: Initializing PollingInterval to '10' second(s) as specified in Configuration file.
w3wp!library!1!7/28/2014-09:08:41:: i INFO: Initializing WindowsServiceUseFileShareStorage to 'False' as specified in Configuration file.
w3wp!library!1!7/28/2014-09:08:41:: i INFO: Initializing MemoryLimit to '60' percent as specified in Configuration file.
w3wp!library!1!7/28/2014-09:08:41:: i INFO: Initializing RecycleTime to '720' minute(s) as specified in Configuration file.
w3wp!library!1!7/28/2014-09:08:41:: i INFO: Initializing MaximumMemoryLimit to '80' percent as specified in Configuration file.
w3wp!library!1!7/28/2014-09:08:41:: i INFO: Initializing MaxAppDomainUnloadTime to '30' minute(s) as specified in Configuration file.
w3wp!library!1!7/28/2014-09:08:41:: i INFO: Initializing MaxQueueThreads to '0' thread(s) as specified in Configuration file.
w3wp!library!1!7/28/2014-09:08:41:: i INFO: Initializing IsWebServiceEnabled to 'True' as specified in Configuration file.
w3wp!library!1!7/28/2014-09:08:42:: i INFO: Initializing MaxActiveReqForOneUser to '20' requests(s) as specified in Configuration file.
w3wp!library!1!7/28/2014-09:08:42:: i INFO: Initializing MaxScheduleWait to '5' second(s) as specified in Configuration file.
w3wp!library!1!7/28/2014-09:08:42:: i INFO: Initializing DatabaseQueryTimeout to '120' second(s) as specified in Configuration file.
w3wp!library!1!7/28/2014-09:08:42:: i INFO: Initializing ProcessRecycleOptions to '0' as specified in Configuration file.
w3wp!library!1!7/28/2014-09:08:42:: i INFO: Initializing RunningRequestsScavengerCycle to '60' second(s) as specified in Configuration file.
w3wp!library!1!7/28/2014-09:08:42:: i INFO: Initializing RunningRequestsDbCycle to '60' second(s) as specified in Configuration file.
w3wp!library!1!7/28/2014-09:08:42:: i INFO: Initializing RunningRequestsAge to '30' second(s) as specified in Configuration file.
w3wp!library!1!7/28/2014-09:08:42:: i INFO: Initializing CleanupCycleMinutes to '10' minute(s) as specified in Configuration file.
w3wp!library!1!7/28/2014-09:08:42:: i INFO: Initializing DailyCleanupMinuteOfDay to default value of '120' minutes since midnight because it was not specified in Configuration file.
w3wp!library!1!7/28/2014-09:08:42:: i INFO: Initializing WatsonFlags to '1064' as specified in Configuration file.
w3wp!library!1!7/28/2014-09:08:42:: i INFO: Initializing WatsonDumpOnExceptions to 'Microsoft.ReportingServices.Diagnostics.Utilities.InternalCatalogException,Microsoft.ReportingServices.Modeling.InternalModelingException' as specified in Configuration
file.
w3wp!library!1!7/28/2014-09:08:42:: i INFO: Initializing WatsonDumpExcludeIfContainsExceptions to 'System.Data.SqlClient.SqlException,System.Threading.ThreadAbortException' as specified in Configuration file.
w3wp!library!1!7/28/2014-09:08:42:: i INFO: Initializing SecureConnectionLevel to '0' as specified in Configuration file.
w3wp!library!1!7/28/2014-09:08:42:: i INFO: Initializing DisplayErrorLink to 'True' as specified in Configuration file.
w3wp!library!1!7/28/2014-09:08:42:: i INFO: Initializing WebServiceUseFileShareStorage to 'False' as specified in Configuration file.
w3wp!resourceutilities!1!7/28/2014-09:08:42:: i INFO: Reporting Services starting SKU: Enterprise
w3wp!resourceutilities!1!7/28/2014-09:08:42:: i INFO: Evaluation copy: 0 days left
w3wp!library!1!7/28/2014-09:08:42:: e ERROR: Throwing Microsoft.ReportingServices.Diagnostics.Utilities.ServerConfigurationErrorException: The report server has encountered a configuration error. See the report server log files for more information., CryptUnprotectData:
Win32 error:13;
Info: Microsoft.ReportingServices.Diagnostics.Utilities.ServerConfigurationErrorException: The report server has encountered a configuration error. See the report server log files for more information.
w3wp!library!1!7/28/2014-09:08:42:: e ERROR: Throwing Microsoft.ReportingServices.Diagnostics.Utilities.FailedToDecryptConfigInformationException: The encrypted value for the "LogonCred" configuration setting cannot be decrypted., ;
Info: Microsoft.ReportingServices.Diagnostics.Utilities.FailedToDecryptConfigInformationException: The encrypted value for the "LogonCred" configuration setting cannot be decrypted. ---> Microsoft.ReportingServices.Diagnostics.Utilities.ServerConfigurationErrorException:
The report server has encountered a configuration error. See the report server log files for more information.
   at Microsoft.ReportingServices.Diagnostics.DataProtectionLocal.UnprotectData(Byte[] data, Int32 dwFlags, Boolean transitoryData)
   at Microsoft.ReportingServices.Diagnostics.DataProtectionLocal.LocalUnprotectData(String data, Boolean transitoryData)
   at Microsoft.ReportingServices.Diagnostics.RSConfiguration.DecryptCatalogData(String encryptedData, String element)
   --- End of inner exception stack trace ---

Hi Vivek,
In Reporting Services, values for LogonUser, LogonDomain, and LogonCred are created when the report server connection is configured to use a domain account. As to the error that “The encrypted value for the "LogonCred" configuration setting cannot be decrypted”,
we can know that it relates to the domain account for report server connection.
To fix this issue, we can refer to the following steps:
Log in to SQL Server Database Engine in SQL Server Management Studio.
Under Security folder, give sufficient permissions for your domain account.
Open your Reporting Services Configuration (go to Start -> All Programs -> Microsoft SQL Server 2005 -> Configuration Tools -> Reporting Services Configuration)
Navigate to the Database Setup tab, select ‘Service Credentials’ as the Credentials Type, then type your domain account and password in there. Press Apply.
Restart the Report Server services.
Reference:
http://social.msdn.microsoft.com/Forums/sqlserver/en-US/2d05b404-83aa-4fb2-bba6-52b587e890ec/sql-2005-rs-configuration-tool-encryption-key-error
Hope this helps.
Thanks,
Katherine Xiong
Katherine Xiong
TechNet Community Support

The report server has encountered a configuration error. (rsServerConfigurationError)

Hi,
One of the server in my organization running SQL server 2008 reporting services.
Users are complaining that they are not able to fetch reports, after going through logs its been found that following three errors are coming although reporting services are running & both report DBs are online :-
Report Server (MSSQLSERVER) cannot load the Windows extension.
Report Server (MSSQLSERVER) cannot connect to the report server database.
Report Server Windows Service (MSSQLSERVER) has not been granted access to the catalog content.
Following is the error when we click on reporting link :-
The report server has encountered a configuration error. (rsServerConfigurationError)
We tried restarting Reporting services but still its not working, reporting services & DBs are on same machine.
Same server was rebooted 4 days ago.
Can anyone please help here.

Hi Abhishek,
According to the error message, it seems that the issue is caused by the account used to connect catalog database does not have permissions to access the catalog content.
To fix this issue, please refer to the following steps:
Open Reporting Services Configuration Manager.
Go to "Encryption Keys" to backup the Encryption Key.
Go to "Database" tab to click "Change Credentials" to reset the connections.
If everything is configured correctly but still it didn't work, try to delete encrypted content. Please note that once we delete encrypted content, we cannot recover it. We must re-specify connection strings and stored credentials, and we must activate subscriptions.
Hope this helps.
Thanks,
Katherine Xiong
Katherine Xiong
TechNet Community Support

The report server has encountered a configuration error. Logon failed for the unattended execution account. (rsServerConfigurationError) Log on failed. Ensure the user name and password are correct. (rsLogonFailed) The user name or password is incorrect

I am able to run the report fine in BIDS in the preview window, and it deployes fine. When it goes to view the report in the browser, I get the following error. There is no domain, I am using a standalone computer with SQL Server and SSRS on
this one machine.
Can anyone point to where I might configure the permission it is looking for? thanks! Steven
The report server has encountered a configuration error. Logon failed for the unattended execution account. (rsServerConfigurationError)
Log on failed. Ensure the user name and password are correct. (rsLogonFailed)
The user name or password is incorrect
Steven DeSalvo

Hi StevenDE2012,
Based on the error message "The report server has encountered a configuration error. Logon failed for the unattended execution account. (rsServerConfigurationError)", it seems that the Unattended Execution Account settings in Reporting Services
Configuration is not correct.
Reporting Services provides a special account that is used for unattended report processing and for sending connection requests across the network. Unattended report processing refers to any report execution process that is triggered by an event rather than
a user request. The report server uses the unattended report processing account to log on to the computer that hosts the external data source. This account is necessary because the credentials of the Report Server service account are never used to connect
to other computers. To configure the account, please refer to the following steps:
Start the Reporting Services Configuration tool and connect to the report server instance you want to configure.
On the Execution Account page, select Specify an execution account.
Type the account and password, retype the password, and then click Apply.
In addition, please verify you have access to the Report Server database by following steps:
Go to SQL Server Reporting Services Configuration Manager, make sure the configuration is correct.
Go to Database, Verify that you can connect to the database.
Make sure you are granted public and RSExecRole roles.
Reference:
Configure the Unattended Execution Account
Configure a Report Server Database Connection
If the problem is unresolved, i would appreciate it if you could give us detailed error log, it will help us move more quickly toward a solution.
Thanks,
Wendy Fu

An error occurred within the report server database. This may be due to a connection failure, timeout or low disk condition within the database. mail will not be sent.

Similar Messages

Maybe you are looking for