An internal tool or library returned an error

Installer build error code-21 LabWindowsCVI 12.0.1
[ 신규 ]
옵션
While attempting to build an installer I get an error code -21. What is the error and how do I correct it?
//=====================
// ERROR Message
//=====================
Adding files to installer
*** Error: An internal tool or library returned an error. (Error code -21)
*** Error Details:
Error in MDF API function: _MDFBuildDevPart_Close
Error in MDF::BuildDeveloperPart::Close.
nmdkAddFile returned error code 26043
*** End Error Report

This error is generated when the distribution builder fails to add a file to the distribution. Typically, error -21 will report which file is causing the error. Since it is not reporting the problematic file, you will have to discover it on your own. Start with the suggestion in this KnowledgeBase article to see if any files show up in red in the Files view. If not, then try removing files one at a time until the distribution builds. If you can locate the problematic file, make sure that it exists at the path specified.
National Instruments
Product Support Engineer

Similar Messages

MxiFindDevLA() crashed without return any error code

Version 2.1.1 of the VXI library returns 0xffffffff, error code.
Version 3.2 and 3.3.1 simply crashed the application with returning any error code.
Can you please tell me if there is any update within the mxiFindDevLA() function that's causing the problem?
side note: there is no pci-mxi2 hardware installed on the system.
Ken

Ken-
I think in order to best answer your question we need additional details about your setup.
First, "mxiFindDevLA" is not an NI function. We provide an operation called "FindDevLA" which is probably related, but it sounds like someone (perhaps an instrument driver?) has provided a new function which may have behaviors we are not expecting. One step that would help us determine what the operation does would be for you to attach the output of NI Spy when your application runs.
Also, I am confused by your side note. FindDevLA (which might be used by mxiFindDevLA) is an NI-VXI API operation. All NI-VXI API operations MUST be run after InitVXIlibrary succeeds. InitVXIlibrary will not work (it will return an error) if there is no controller in your sy
stem. From your side note I can't tell if you have no controller at all, or just some other controller that is not a PCI-MXI-2.
If you can provide this additional information it would assist us in debugging the problem. FindDevLA itself is a simple operation which compares the settings you provide against the device info fields for each logical address in your system. It could cause a crash if you pass in an invalid pointer for the logical address parameter, but that was true in NI-VXI 2.x as well, so I look forward to any additional information you can provide.
-Scot

SharePoint List Error :[DataSource.Error] SharePoint: Request failed: The remote server returned an error: (500) Internal Server Error. (An error occurred while processing this request.)

When I connect to the SharePoint site that contains the lists I need to build my query from , Power Query enumerates the list and displays them in the tool. I can click on the system tables and view the records but any table
in the list I created returns this error.
I can connect fine with InfoPath
[DataSource.Error] SharePoint: Request failed: The remote server returned an error: (500) Internal Server Error. (An error occurred while processing this request.)
thank you for your help
Andrew

Hi Andrew. In order for us diagnose this issue, you'll need to capture some network traces using a tool such as Fiddler and share them by sending a Frown.
To capture a trace using Fiddler, start Fiddler, enable the Tools > Fiddler Options > HTTPS > Decrypt HTTPS traffic option, start the capture, reproduce your issue, then stop and save the capture. You can find more information here.
Once you've done that, please send a Frown through the Power Query ribbon and attach the traces.
Thanks,
Ehren

Urgent help On as2 error The remote server returned an error: (500) Internal Server Error.

hi,
im configured the as2 partner setup as per this http://msdn.microsoft.com/en-us/library/bb246129(BTS.20).aspx.
but when im process file , then file try hit partner url goes dyhradated state,then failed. then i got below error.
The remote server returned an error: (500) Internal Server Error.
please any help..
Thanks

500 server error could be due to anyone of the following reasons:
Party configuration is wrong. Party properties/configurations have to be discussed upfront with the source/destination system and have to be in-line with
them.
Certificates have to be deployed in correct folders based on certificate types like private/public/signed etc.
Firewall (or network components) has to be opened accordingly for parties(systems) to interact. This change has to be done at the both the levels, source and destination.
If you receive it through HTTPReceive.dll (may uses this for AS2), you have to check its configurations.
Also 500 error, could occur even if your BizTalk artifacts has not been configured/deployed/enabled properly.
If this answers your question please mark it accordingly. If this post is helpful, please vote as helpful by clicking the upward arrow mark next to my reply.

Error during Custom Build - error PRJ0019: A tool returned an error code from "Performing Custom Build Step"

Hi All,
I was trying to develop C++ web service using GShop with Visual Studio 2005.I refered a tutorial :-
http://guruce.com/blogpost/hosting-webservices-on-windows-embedded-compact-windows-ce-using-gsoap .
AS per the tutorial i proceeded. But, i stuck-up when making a custom build with Helloworld.wsdl.Here is the output :
1>------ Rebuild All started: Project: HelloWorldWebService, Configuration: Debug Pocket PC 2003 (ARMV4) ------
1>Deleting intermediate and output files for project 'HelloWorldWebService', configuration 'Debug|Pocket PC 2003 (ARMV4)'
1>Performing Custom Build Step
1>'D:\Test' is not recognized as an internal or external command,
1>operable program or batch file.
1>Project : error PRJ0019: A tool returned an error code from "Performing Custom Build Step"
1>Build log was saved at "file://d:\Test Code\HelloWorldWebService\HelloWorldWebService\Pocket PC 2003 (ARMV4)\Debug\BuildLog.htm"
1>HelloWorldWebService - 1 error(s), 0 warning(s)
========== Rebuild All: 0 succeeded, 1 failed, 0 skipped ==========
As given in the tutorial i kept my custom build command line as : -
$(SolutionDir)\gsoap-2.8\gsoap\bin\win32\wsdl2h.exe -s $(InputPath) -o $(ProjectDir)$(InputName).h
and outpouts : $(InputName).h
I kept GSHOP in the project filder :- D:\Test Code\HelloWorldWebService
Kindly help.
Jyotiranjan

Hi Jyotiranjan,
I’m glad to hear that you got it working.
Thank you for sharing your solutions
experience here. It will be very beneficial for other community members who
have similar questions.
Best regards,
Lucy
Lucy Liu [MSFT]
MSDN Community Support | Feedback to us
Get or Request Code Sample from Microsoft
Please remember to mark the replies as answers if they help and unmark them if they provide no help.

DataSource.Error: SharePoint: Request failed: The remote server returned an error: (500) Internal Server Error.

Seeing this error when retrieving data from a SharePoint list. I have full access to the list. Any help would be appreciated.
DataSource.Error: SharePoint: Request failed: The remote server returned an error: (500) Internal Server Error. (An error occurred while processing this request.)
Details:
https://xyz/_vti_bin/ListData.svc/ListName


I think I figured out how to use Fiddler. Here's the information I captured-
This is a Tunnel. Status: OPEN, Raw Bytes Out: 3,797; In: 7,604
The selected session is a HTTP CONNECT Tunnel. This tunnel enables a client to send raw traffic (e.g. HTTPS-encrypted streams or WebSocket messages) through a HTTP Proxy Server (like Fiddler).
To enable Fiddler's HTTPS-decryption feature and view decrypted traffic, click Tools > Fiddler Options > HTTPS.
Request Count:   1
Bytes Sent:      107  (headers:107; body:0)
Bytes Received: 107  (headers:107; body:0)
Tunnel Sent:     3,797
Tunnel Received: 7,604
ACTUAL PERFORMANCE
ClientConnected: 11:06:11.389
ClientBeginRequest: 11:06:11.395
GotRequestHeaders: 11:06:11.395
ClientDoneRequest: 11:06:11.395
Determine Gateway: 0ms
DNS Lookup:   176ms
TCP/IP Connect: 77ms
HTTPS Handshake: 0ms
ServerConnected: 11:06:11.649
FiddlerBeginRequest: 11:06:11.649
ServerGotRequest: 11:06:11.649
ServerBeginResponse: 00:00:00.000
GotResponseHeaders: 00:00:00.000
ServerDoneResponse: 00:00:00.000
ClientBeginResponse: 11:06:11.649
ClientDoneResponse: 11:06:11.649
Overall Elapsed: 0:00:00.254
-= Fiddler Event Log =-
See http://fiddler2.com/r/?FiddlerLog for details.
10:33:33:8092 Fiddler Running...
10:33:33:8118 Fiddler.Network.AutoProxy> AutoProxy Detection failed.
10:33:33:8118 AutoProxy failed. Disabling for this network.
10:33:33:8118 Windows 8+ AppContainer isolation feature detected.
11:01:21:4125 HTTPSLint> Warning: ClientHello record was 382 bytes long. Some servers have problems with ClientHello's greater than 255 bytes. https://github.com/ssllabs/research/wiki/Long-Handshake-Intolerance
11:01:21:4145 HTTPSLint> Warning: ClientHello record was 382 bytes long. Some servers have problems with ClientHello's greater than 255 bytes. https://github.com/ssllabs/research/wiki/Long-Handshake-Intolerance
11:01:21:4185 HTTPSLint> Warning: ClientHello record was 382 bytes long. Some servers have problems with ClientHello's greater than 255 bytes. https://github.com/ssllabs/research/wiki/Long-Handshake-Intolerance
11:01:21:4258 HTTPSLint> Warning: ClientHello record was 382 bytes long. Some servers have problems with ClientHello's greater than 255 bytes. https://github.com/ssllabs/research/wiki/Long-Handshake-Intolerance
11:01:21:4268 HTTPSLint> Warning: ClientHello record was 382 bytes long. Some servers have problems with ClientHello's greater than 255 bytes. https://github.com/ssllabs/research/wiki/Long-Handshake-Intolerance
11:01:21:4298 HTTPSLint> Warning: ClientHello record was 382 bytes long. Some servers have problems with ClientHello's greater than 255 bytes. https://github.com/ssllabs/research/wiki/Long-Handshake-Intolerance
11:01:21:4398 HTTPSLint> Warning: ClientHello record was 382 bytes long. Some servers have problems with ClientHello's greater than 255 bytes. https://github.com/ssllabs/research/wiki/Long-Handshake-Intolerance
11:01:21:4398 HTTPSLint> Warning: ClientHello record was 382 bytes long. Some servers have problems with ClientHello's greater than 255 bytes. https://github.com/ssllabs/research/wiki/Long-Handshake-Intolerance
11:01:21:4518 HTTPSLint> Warning: ClientHello record was 382 bytes long. Some servers have problems with ClientHello's greater than 255 bytes. https://github.com/ssllabs/research/wiki/Long-Handshake-Intolerance
11:01:21:4518 HTTPSLint> Warning: ClientHello record was 382 bytes long. Some servers have problems with ClientHello's greater than 255 bytes. https://github.com/ssllabs/research/wiki/Long-Handshake-Intolerance
11:01:21:4528 HTTPSLint> Warning: ClientHello record was 382 bytes long. Some servers have problems with ClientHello's greater than 255 bytes. https://github.com/ssllabs/research/wiki/Long-Handshake-Intolerance
11:01:21:4828 HTTPSLint> Warning: ClientHello record was 382 bytes long. Some servers have problems with ClientHello's greater than 255 bytes. https://github.com/ssllabs/research/wiki/Long-Handshake-Intolerance
11:01:21:5789 HTTPSLint> Warning: ClientHello record was 382 bytes long. Some servers have problems with ClientHello's greater than 255 bytes. https://github.com/ssllabs/research/wiki/Long-Handshake-Intolerance
11:01:21:5820 HTTPSLint> Warning: ClientHello record was 382 bytes long. Some servers have problems with ClientHello's greater than 255 bytes. https://github.com/ssllabs/research/wiki/Long-Handshake-Intolerance
11:01:21:5879 HTTPSLint> Warning: ClientHello record was 382 bytes long. Some servers have problems with ClientHello's greater than 255 bytes. https://github.com/ssllabs/research/wiki/Long-Handshake-Intolerance
11:01:21:6179 HTTPSLint> Warning: ClientHello record was 382 bytes long. Some servers have problems with ClientHello's greater than 255 bytes. https://github.com/ssllabs/research/wiki/Long-Handshake-Intolerance
11:01:21:6530 HTTPSLint> Warning: ClientHello record was 382 bytes long. Some servers have problems with ClientHello's greater than 255 bytes. https://github.com/ssllabs/research/wiki/Long-Handshake-Intolerance
11:01:21:6924 HTTPSLint> Warning: ClientHello record was 382 bytes long. Some servers have problems with ClientHello's greater than 255 bytes. https://github.com/ssllabs/research/wiki/Long-Handshake-Intolerance

ASMX web service and The remote server returned an error: (500) Internal Server Error issue

i have developed a very small web service and which is hosted along with our web site. our webservice url is
http://www.bba-reman.com/Search/SearchDataIndex.asmx
web service code
namespace WebSearchIndex
#region SearchDataIndex
/// <summary>
/// SearchDataIndex is web service which will call function exist in another library for part data indexing
/// </summary>
[WebService(Namespace = "http://tempuri.org/")]
[WebServiceBinding(ConformsTo = WsiProfiles.BasicProfile1_1)]
[System.ComponentModel.ToolboxItem(false)]
// To allow this Web Service to be called from script, using ASP.NET AJAX, uncomment the following line.
// [System.Web.Script.Services.ScriptService]
public class SearchDataIndex : System.Web.Services.WebService
//public AuthHeader ServiceAuth=null;
public class AuthHeader : SoapHeader
public string Username;
public string Password;
#region StartIndex
/// <summary>
/// this function will invoke CreateIndex function of SiteSearch module to reindex the data
/// </summary>
[WebMethod]
public string StartIndex(AuthHeader auth)
string strRetVal = "";
if (auth.Username == "Admin" && auth.Password == "Admin")
strRetVal = SiteSearch.CreateIndex(false);
else
SoapException se = new SoapException("Failed : Invalid credentials",
SoapException.ClientFaultCode,Context.Request.Url.AbsoluteUri,new Exception("Invalid credentials"));
throw se;
return strRetVal;
#endregion
#endregion
when i was calling that web service from my win apps using
HttpWebRequest
class then getting error The remote server returned an error: (500) Internal Server Error
here is code of my win apps from where i am calling web service
string strXml = "";
strXml = "<s:Envelope xmlns:s='http://schemas.xmlsoap.org/soap/envelope/'><s:Body><StartIndex xmlns='http://tempuri.org/' xmlns:i='http://www.w3.org/2001/XMLSchema-instance'><auth><Username>joy</Username><Password>joy</Password></auth></StartIndex></s:Body></s:Envelope>";
string url = "http://www.bba-reman.com/Search/SearchDataIndex.asmx";
HttpWebRequest req = (HttpWebRequest)WebRequest.Create(url);
req.Method = "POST";
req.ContentType = "text/xml";
req.KeepAlive = false;
req.ContentLength = strXml.Length;
StreamWriter streamOut = new StreamWriter(req.GetRequestStream(), System.Text.Encoding.ASCII);
streamOut.Write(strXml);
streamOut.Close();
StreamReader streamIn = new StreamReader(req.GetResponse().GetResponseStream());
string strResponse = streamIn.ReadToEnd();
streamIn.Close();
i am just not being able to understand when this line execute
StreamReader streamIn = new StreamReader(req.GetResponse().GetResponseStream());
then getting the error The remote server returned an error: (500) Internal Server Error
not being able to understand where i made the mistake. mistake is in the code of web service end or in calling code?
help me to fix this issue. thanks

Hi Mou,
I just tried your win app code about calling web service, but failed. I got the 500 error after I called your service:
The error message I quoted from Fiddler:
<?xml version="1.0" encoding="utf-8"?><soap:Envelope xmlns:soap="http://schemas.xmlsoap.org/soap/envelope/" xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance" xmlns:xsd="http://www.w3.org/2001/XMLSchema"><soap:Body><soap:Fault><faultcode>soap:Client</faultcode><faultstring>System.Web.Services.Protocols.SoapException: Failed : Invalid credentials ---> System.Exception: Invalid credentials
--- End of inner exception stack trace ---
at BBAReman.WebSearchIndex.SearchDataIndex.StartIndex(AuthHeader auth)</faultstring><faultactor>http://www.bba-reman.com/Search/SearchDataIndex.asmx</faultactor><detail /></soap:Fault></soap:Body></soap:Envelope>
I am not totally sure that error occurred by the authentication. But I suggest you can try to add this service into your project using this method below:
1.right click the Reference and select Add Service Reference
2.input your service link and click "Go"
And you can use this service as the following:
private async void callService()
ServiceReference1.SearchDataIndexSoapClient client =new ServiceReference1.SearchDataIndexSoapClient();
var Str= await client.StartIndexAsync(new ServiceReference1.AuthHeader { Username = "Admin", Password = "Admin" });
Please try it.
Regards,
Will
We are trying to better understand customer views on social support experience, so your participation in this interview project would be greatly appreciated if you have time. Thanks for helping make community forums a great place.
Click
HERE to participate the survey.

After renaming my MAC hard drive, Acrobat, Illustrator and Bridge fail to launch. Acrobat returns the error message "An internal error occurred". I've checked this out and it seems related to user permissions. The version is Acrobat X. My machine has mult

After renaming my MAC hard drive, Acrobat, Illustrator and Bridge fail to launch. Acrobat returns the error message "An internal error occurred". I've checked this out and it seems related to user permissions. The version is Acrobat X. My machine has multiple user accounts. Any help would be appreciated. I renamed the drive to its original name but to no effect. RR

I resolved the issue.
The problem is indeed a permissions issue with the Adobe Application Support folder.
First, in MAC OS Lion the ~/Library/ folder is hidden by default. You must unhide it in order to proceed. (if it is already visible in your ~/User/ folder, proceed to Step 4.)
Next launch the Terminal application.
At the command line, paste the following command line: chflags nohidden ~/Library/
Go to /Users/youruserid/Library/Application Support/Adobe
Get info on the ~/Adobe folder and reset your permissions to read/write and apply to all enclosed folders
Problem solved. RR

The remote server returned an error: (500) Internal Server Error.

Description: An unhandled exception occurred during the execution of the current web request. Please review the stack
trace for more information about the error and where it originated in the code.
Exception Details: System.Net.WebException: The remote server returned an error: (500) Internal Server Error.
Source Error:
Line 63: }
Line 64: //Gets the response
Line 65: WebResponse response = req.GetResponse();
Line 66: //Writes the Response
Line 67: Stream responseStream = response.GetResponseStream();

Looks like C# code and you've posted to the Visual Basic forum.
Anyway, an error 500 means that there is a problem accessing the resource in the web request. There could be many reasons for this so I would verify that the web request is correct first and if it continues to fail then the resource (web page?) needs to
be fixed before your code will function.
Visual C# forum
Paul ~~~~ Microsoft MVP (Visual Basic)

Form Based Authentication in SharePoint 2013: Getting The remote server returned an error: (500) Internal Server Error

Hi
I configured forms based authentication mode in Sharepoint 2013 site. When i tried to log in with windows authentication prompt it throws the following error
The remote server returned an error: (500) Internal Server Error
[WebException: The remote server returned an error: (500) Internal Server Error.] System.Net.HttpWebRequest.GetResponse() +8548300 System.ServiceModel.Channels.HttpChannelRequest.WaitForReply(TimeSpan timeout) +111 [ProtocolException:
The content type text/html; charset=utf-8 of the response message does not match the content type of the binding (application/soap+msbin1). If using a custom encoder, be sure that the IsContentTypeSupported method is implemented properly. The first
1024 bytes of the response were: '<!DOCTYPE html PUBLIC "-//W3C//DTD XHTML 1.0 Strict//EN" "http://www.w3.org/TR/xhtml1/DTD/xhtml1-strict.dtd">
How to fix this issue?
Regards,
Siva

Did you create a new web application or modify an existing web application?
I would start by checking the ULS logs, maybe there is an incorrect setting within one of the web.config files, or SQL permissions.
Also, as suggested above, check application pools are running.
This blog post is a great guide for setting up FBA, check it through to make sure you haven't missed any steps:
http://blogs.technet.com/b/ptsblog/archive/2013/09/20/configuring-sharepoint-2013-forms-based-authentication-with-sqlmembershipprovider.aspx

Workflow Manager for SP2013. The remote server returned an error: (500) Internal Server Error.

I am *almost* all the way through provisioning my on premise SP 2013 farm for SharePoint 2013 Workflows. Workflow manager is installed alongside Service Bus. Workflow Manager client is installed on the SP servers. I built a new simple list-based
workflow in SP Designer 2013, saved it, and published it without any errors. However, when I go back to the list in my portal and try to run the workflow, I get the "Sorry, something went wrong" page, and the logs say this:
05/15/2013 12:41:05.07 w3wp.exe (0x071C)                       0x085C SharePoint Foundation
Runtime                       tkau Unexpected System.Net.WebException: The remote server returned an error: (500) Internal Server
Error.    at Microsoft.Workflow.Common.AsyncResult.End[TAsyncResult](IAsyncResult result)     at Microsoft.Workflow.Client.HttpGetResponseAsyncResult`1.End(IAsyncResult result)     at Microsoft.Workflow.Client.ClientHelpers.SendRequest[T](HttpWebRequest
request, T content) 27be1b9c-f990-f096-34a8-7ac8816bc7a5
05/15/2013 12:41:05.08 w3wp.exe (0x071C)                       0x085C SharePoint Foundation
General                       ajlz0 High    Getting Error Message for Exception System.Web.HttpUnhandledException
(0x80004005): Exception of type 'System.Web.HttpUnhandledException' was thrown. ---> Microsoft.Workflow.Client.InternalServerException: Exception thrown from the data layer. For more details, please see the server logs. HTTP headers received from the server
- ActivityId: 0c03f692-8153-43a7-bed5-096214b06168. NodeId: VM22. Scope: /SharePoint/default/d386fdc7-ea7b-4d46-9a39-5c114096eef8/f203a564-e83a-47a3-b11b-e432ac1e6dab. Client ActivityId : 27be1b9c-f990-f096-34a8-7ac8816bc7a5. ---> System.Net.WebException:
The remote server returned an error: (500) Internal Server Error.     at Microsoft.Workflow.Common.AsyncResult.End[TAsyncResult](IAsyncResult result)     at Microsoft.Workflow.Client.HttpGetResponseAsyncResult`1.End(... 27be1b9c-f990-f096-34a8-7ac8816bc7a5
05/15/2013 12:41:05.08* w3wp.exe (0x071C)                       0x085C SharePoint Foundation
General                       ajlz0 High    ...IAsyncResult result)     at Microsoft.Workflow.Client.ClientHelpers.SendRequest[T](HttpWebRequest
request, T content)     --- End of inner exception stack trace ---     at Microsoft.Workflow.Client.ClientHelpers.SendRequest[T](HttpWebRequest request, T content)     at Microsoft.Workflow.Client.InstanceManager.GetInternal(Int32
skip, Int32 count, String workflowName, WorkflowInstanceStatus workflowStatus, IDictionary`2 activationMetadataFilter)     at Microsoft.SharePoint.WorkflowServices.FabricWorkflowInstanceProvider.EnumerateByMonitoringParameter(Guid monitoringParameter,
Int32 offset, Int32 count, Boolean checkPermissions)     at Microsoft.SharePoint.WorkflowServices.FabricWorkflowInstanceProvider.EnumerateInstancesForListItem(Guid listId, Int32 itemId, Int32 offset)     at Microsoft.Sh... 27be1b9c-f990-f096-34a8-7ac8816bc7a5
05/15/2013 12:41:05.08* w3wp.exe (0x071C)                       0x085C SharePoint Foundation
General                       ajlz0 High    ...arePoint.WorkflowServices.FabricWorkflowInstanceProvider.EnumerateInstancesForListItem(Guid
listId, Int32 itemId)     at Microsoft.SharePoint.WorkflowServices.ApplicationPages.WorkflowPageBase.ConstructStatusArraysWF4(ArrayList running, ArrayList completed, Boolean onlyMyWorkflows)     at Microsoft.SharePoint.WorkflowServices.ApplicationPages.WorkflowPage.ConstructStatusArrays()
at Microsoft.SharePoint.WorkflowServices.ApplicationPages.WorkflowPage.OnLoad(EventArgs e)     at System.Web.UI.Control.LoadRecursive()     at System.Web.UI.Page.ProcessRequestMain(Boolean includeStagesBeforeAsyncPoint,
Boolean includeStagesAfterAsyncPoint)     at System.Web.UI.Page.HandleError(Exception e)     at System.Web.UI.Page.ProcessRequestMain(Boolean includeStagesBeforeAsyncPoint, Boolean includeStages... 27be1b9c-f990-f096-34a8-7ac8816bc7a5
05/15/2013 12:41:05.08* w3wp.exe (0x071C)                       0x085C SharePoint Foundation
General                       ajlz0 High    ...AfterAsyncPoint)     at System.Web.UI.Page.ProcessRequest(Boolean
includeStagesBeforeAsyncPoint, Boolean includeStagesAfterAsyncPoint)     at System.Web.UI.Page.ProcessRequest()     at System.Web.UI.Page.ProcessRequest(HttpContext context)     at System.Web.HttpApplication.CallHandlerExecutionStep.System.Web.HttpApplication.IExecutionStep.Execute()
at System.Web.HttpApplication.ExecuteStep(IExecutionStep step, Boolean& completedSynchronously) 27be1b9c-f990-f096-34a8-7ac8816bc7a5
05/15/2013 12:41:05.08 w3wp.exe (0x071C)                       0x085C SharePoint Foundation
General                       aat87 Monitorable 27be1b9c-f990-f096-34a8-7ac8816bc7a5
Some sort of "general server error" returns a 500 code, but I can't tell from this what the problem(s) might be. Has anyone seen this before?
Thanks.

Go to the server running Workflow Manager and open the Event Viewer; Applications and Services Logs; Microsoft-Workflow; Operational; and look for the underlying error. In our case, the CU for Workflow Manager did something to the SQL permissions and
we ended up using the workaraound described here:
http://social.msdn.microsoft.com/Forums/windowsazure/en-US/054d2a58-8847-4a6a-b1ab-05a79f49fe65/workflow-manager-cumulative-update-february-error?forum=wflmgr
Joe

After Upgrade OBI 10g to 11g:Odbc driver returned an error - SQLExecDirectW

Hi all,
for an OBI upgrade from 10g to 11g I used a RPD and Webcatalog based on a remote machine other than my local machine. Firstable I am making the tests on a Linux Virtual machine, which uses the Sample Lite version from Oracle.
I made the following steps:
1. I upgraded the RPD and Webcatalog. It worked without any errors.
2. I set the static variable BI_EE_HOME via Administration Tool to the path in the Linux machine.
--> Here I am not sure if the set path is correct. It begins with: \bi\ ...\instances\...\coreapplication_obis1 (... : I can't mention here the whole path name).
--> When the OBI Server is installed in Windows, the mentioned static variable points to something like 'C:\<install folder>\...\coreapplication_obis1'
--> Question: is the begin of my set path correct?. I set that pointing to the Linux OBI Server, because the OBI Server is installed on Linux.
Problem:
After login as the user in RPD: Administrator/<Password for my upgraded RPD> I can see the links in the Catalog and the Dashboards links. But I can not see any values, any Reports when going through the links.
For example when trying to see a Dashboard with date 12.02.2011it happens:
Odbc driver returned an error (SQLExecDirectW).
Status: HY000. Code: 10058. [NQODBC] [SQL_STATE: HY000] [nQSError: 10058] general error.
[nQSError: 43113] Message returned from OBIS.
[nQSError: 43119] Query Failed:
[nQSError: 17001] Oracle Error code: 12154, message: ORA-12154: TNS:could not resolve the connect identifier specified
at OCI call OCIServerAttach.
[nQSError: 17014] Could not connect to Oracle database. (HY000)
SQL Issued: SELECT "Dimension_-_My Dimension"."MyDimension" saw_0 FROM "Accounting (ACC)" WHERE "Dimension_-_My Dimension"."MyDimension" LIKE 'J%' ORDER BY saw_0
I think its not retrieving the data from the remote database, because I don't have the data of the remote database in my local. I think the OBI Server still is pointing to the local virtual machine Oracle database.
Can anybody tell me what happens here and how can I solve this problem?.
I would appreciate any help....

Hi gerardnico,
I've tried many things and did as in your articles, but I don't have success with that.
These are the things I did:
1. I searched for the file tnsnames.ora in my Linux virtual machine. I could find it in many paths:
/.../Oracle_BI1/network/admin/samples/tnsnames.ora
/.../oracle/xe/app/oracle/product/10.2.0/server/hs/admin/tnsnames.ora.sample
/.../oracle/xe/app/oracle/product/10.2.0/server/network/admin/tnsnames.ora
/.../oracle/xe/app/oracle/product/10.2.0/server/network/admin/samples/tnsnames.ora
/.../oracle/xe/app/oracle/product/10.2.0/server/network/admin/temp/tnsnames.ora
/.../usr/lib/oracle/xe/app/oracle/product/10.2.0/server/network/admin
in the last path I found the listener.ora as well.
2. I took the tnsnames.ora from the last path, because the ORACLE_HOME points to /.../usr/lib/oracle/xe/app/oracle/product/10.2.0/server
3. I edited the tnsnames.ora this way:
# tnsnames.ora Network Configuration File:
XE =
(DESCRIPTION =
(ADDRESS = (PROTOCOL = TCP)(HOST = host_of_the_remote_machine)(PORT = 1521))
(CONNECT_DATA =
(SERVER = DEDICATED)
(SERVICE_NAME = database_name_of_the_remote_machine)
EXTPROC_CONNECTION_DATA =
(DESCRIPTION =
(ADDRESS_LIST =
(ADDRESS = (PROTOCOL = IPC)(KEY = EXTPROC_FOR_XE))
(CONNECT_DATA =
(SID = database_SID_of_the_remote_machine)
(PRESENTATION = RO)
4. I made a backup of the tnsnames.ora in path /.../Oracle_BI1/network/admin/samples/tnsnames.ora
and copied the tnsnames.ora from /.../usr/lib/oracle/xe/app/oracle/product/10.2.0/server/network/admin to the Oracle_BI1 path
5. I set the TNS_ADMIN to /.../usr/lib/oracle/xe/app/oracle/product/10.2.0/server/network/admin
6. I restarted the BI Server
No success in what I did. The error is still there.
7. I've tried also: sqlplus database_user_remote_machine/database_password_remote_machine@database_SID_remote_machine
I didn't get the connection:
SQL*Plus: Release 10.2.0.1.0 - Production on Thu Jun 16 04:36:10 2011
Copyright (c) 1982, 2005, Oracle. All rights reserved.
ERROR:
ORA-12154: TNS:could not resolve the connect identifier specified
Enter user-name: database_user_remote_machine
Enter password:
ERROR:
ORA-01034: ORACLE not available
ORA-27101: shared memory realm does not exist
Linux Error: 2: No such file or directory
What am I doing wrong here?. I am still thinking that I need the import of the database.
Additional SID=Service-Name=Database-name in the remote machine.

Provider-hosted Apps debug error: The remote server returned an error: (401) unauthorised

Hi,
Any help appreciated!!
I'm getting this error: "The remote server returned an error: (401) unauthorised when I debug a provider-hosted app. I get the error on this line:
HttpWebResponse response = (HttpWebResponse)request.GetResponse();
See code below
I created a high trust development environment following the instructions provided here:
http://msdn.microsoft.com/en-us/library/office/fp179901(v=office.15).aspx and
http://msdn.microsoft.com/library/office/fp179923
I created a provider-hosted app with the intent to:
create a SharePoint list in the appweb
Use self-signed certificate, tokenhepler.cs and sharepointcontext.cs to retrieve current user context and access on SharePoint. (No changes were made to tokenhelper.cs and sharepointcontext.cs)
retrieve list items from the SharePoint list in a button click event handler on a default.aspx of the remote web
What happens:
The app is deployed successfully to the Dev site
The SharePoint feature is deployed and activated
The default.aspx page of the remote web loads
The error (see image) is returned on clicking of the button
My environment is an on-premise SharePoint 2013 with AD and my dev box is standalone windows 8.1 running Visual Studio Professional 2013 Update 3.
The code block below is a copy of the default.aspx code-behind
using System;
using System.Collections.Generic;
using System.Linq;
using System.Web;
using System.Web.UI;
using System.Web.UI.WebControls;
using Microsoft.SharePoint.Client;
using Microsoft.IdentityModel.S2S.Tokens;
using System.Net;
using System.IO;
using System.Xml;
using System.Data;
using System.Xml.Linq;
using System.Xml.XPath;
namespace Idea.GeneratorWeb
public partial class Default : System.Web.UI.Page
SharePointContextToken contextToken;
string accessToken;
Uri sharepointUrl;
protected void Page_PreInit(object sender, EventArgs e)
Uri redirectUrl;
switch (SharePointContextProvider.CheckRedirectionStatus(Context, out redirectUrl))
case RedirectionStatus.Ok:
return;
case RedirectionStatus.ShouldRedirect:
Response.Redirect(redirectUrl.AbsoluteUri, endResponse: true);
break;
case RedirectionStatus.CanNotRedirect:
Response.Write("An error occurred while processing your request.");
Response.End();
break;
protected void Page_Load(object sender, EventArgs e)
//// The following code gets the client context and Title property by using TokenHelper.
//// To access other properties, the app may need to request permissions on the host web.
var spContext = SharePointContextProvider.Current.GetSharePointContext(Context);
//var spContext = new ClientContext("MySPDevInstance");
//spContext.Credentials = new NetworkCredential("username", "password");
//using (var clientContext = spContext.CreateUserClientContextForSPHost())
// clientContext.Load(clientContext.Web, web => web.Title);
// clientContext.ExecuteQuery();
// Response.Write(clientContext.Web.Title);
string contextTokenString = TokenHelper.GetContextTokenFromRequest(Request);
if (contextTokenString != null)
// Get context token
contextToken = TokenHelper.ReadAndValidateContextToken(contextTokenString, Request.Url.Authority);
// Get access token
sharepointUrl = new Uri(Request.QueryString["SPAppWebUrl"]);
accessToken = TokenHelper.GetAccessToken(contextToken, sharepointUrl.Authority).AccessToken;
// Pass the access token to the button event handler.
Button1.CommandArgument = accessToken;
protected void Button1_Click(object sender, EventArgs e)
// Retrieve the access token that the Page_Load method stored
// in the button's command argument.
string accessToken = ((Button)sender).CommandArgument;
if (IsPostBack)
sharepointUrl = new Uri(Request.QueryString["SPAppWebUrl"]);
// REST/OData URL section
string oDataUrl = "/_api/Web/lists/getbytitle('Diagrams In Idea Generator')/items?$select=Title,Diagram,SharingStatus";
// HTTP Request and Response construction section
HttpWebRequest request = (HttpWebRequest)HttpWebRequest.Create(sharepointUrl.ToString() + oDataUrl);
request.Method = "GET";
request.Accept = "application/atom+xml";
request.ContentType = "application/atom+xml;type=entry";
request.Headers.Add("Authorization", "Bearer " + accessToken);
HttpWebResponse response = (HttpWebResponse)request.GetResponse();
// Response markup parsing section
XDocument oDataXML = XDocument.Load(response.GetResponseStream(), LoadOptions.None);
XNamespace atom = "http://www.w3.org/2005/Atom";
XNamespace d = "http://schemas.microsoft.com/ado/2007/08/dataservices";
XNamespace m = "http://schemas.microsoft.com/ado/2007/08/dataservices/metadata";
List<XElement> entries = oDataXML.Descendants(atom + "entry")
.Elements(atom + "content")
.Elements(m + "properties")
.ToList();
var entryFieldValues = from entry in entries
select new
Character = entry.Element(d + "Title").Value,
Actor = entry.Element(d + "Diagram").Value,
CastingStatus = entry.Element(d + "SharingStatus").Value
GridView1.DataSource = entryFieldValues;
GridView1.DataBind();
Any ideas what I might be doing wrong

Hi ,
Use the below code
Public string GetAccessToken(){
string sharePointSiteUrlHost = Page.Request["SPHostUrl"].Tostring();
string AccessToken = tokenHelper.GetS2SAccessTokenWithWindowsIdentity(sharePointSiteUrlHost, Request.LogonUserIdentity);
return accessToken;
Than initialize the ClientCOntext with the below Method
private static ClientContext GetClientContextWithAccessTokenString(string targetUrl, object accessToken)
ClientContext clientContext = new ClientContext(targetUrl);
clientContext.AuthenticationMode = ClientAuthenticationMode.Anonymous;
clientContext.FormDigestHandlingEnabled = false;
clientContext.ExecutingWebRequest +=
delegate(object oSender, WebRequestEventArgs webRequestEventArgs)
webRequestEventArgs.WebRequestExecutor.WebRequest.UserAgent = "Mozilla/5.0 (compatible; MSIE 9.0; Windows NT 6.1; WOW64; Trident/5.0)";
webRequestEventArgs.WebRequestExecutor.RequestHeaders["Authorization"] =
"Bearer " + accessToken;
return clientContext;
use this clientCOntext and it will work.
Do not use
SharePointContextProvider
Whenever you see a reply and if you think is helpful,Vote As Helpful! And whenever you see a reply being an answer to the question of the thread, click Mark As Answer

Error: Load operation failed for query 'GetAuthenticationInfo'. The remote server returned an error: NotFound.

Hello,
I have a lightswitch web-application in development, which I need to copy from one computer to the other. I have tried doing it both through Git and by simply copying the solution and opening the project on another machine. The project builds without errors,
but when I try to debug it, it opens a web-browser, loads to 100% and pops up an error - Load operation failed for query 'GetAuthenticationInfo'. The remote server returned an error: NotFound.
Now, I have tried repairing Visual Studio on my machine, reinstalling .NET framework and setting <basicAuthentication enabled="false" /> in web.config, yet it still does not run.
When using Fiddler, it shows an error while loading the application - "HTTP/1.1 500 Internal Server Error" , which I honestly don't know what it means.
The application uses ComponentOne and Telerik modules, but they are both installed on both machines.
The application does run perfectly on the original machine, but it is not working on any other one.
Both machines are using Win 8.1 and Visual Studio 2013 Update 4.
I have tried to look this up online, but most people's problem are when they are deploying the app, not just debugging. I would be really happy for any help with this issue.
Thanks!

I have the same problem on one of my development machines. Whenever I create a new project, the System.IdentityModel.Tokens.Jwt nuget package is not referenced properly. The project compiles correctly but you are not able to debug as I get the same error
as you.
If you open up your references and there is an error next to any of your references make sure that you correct them. In the case of the jwt reference error, I have to remove the jwt reference and then add it back from the packages folder.
This may not be your problem but could point you in a direction?

Error occurred in deployment step 'Uninstall app for SharePoint': The remote server returned an error: (502) Bad Gateway.

Installed SP 2013 Foundation in my Hyper-V machine
Created and done all the steps mentioned here http://blogs.msdn.com/b/shariq/archive/2013/05/07/how-to-set-up-high-trust-apps-for-sharepoint-2013-amp-troubleshooting-tips.aspx && http://msdn.microsoft.com/en-us/library/office/fp179901%28v=office.15%29.aspx
for self signed certificate
copied those two certificates in my local machine(base machine) D drive
(D:\Cert)
Both VM and base machine are in same domain
Installed VS 2013 in my base machine and create a Provided hosted app with the copied certificates, (For creation i followed the above mentioned URL)
Just created and hit F5 to run in my base machine, but getting this error
Error occurred in deployment step 'Uninstall app for SharePoint': The remote server returned an error: (502) Bad Gateway.
Please help me to resolve this issue, trying to figure out from last 2 days
Thanks in Advance
Arun

Hi Harminder,
This happens because an app has already been deployed and you are deploying it again using the same version.
Resolution:
Open the AppManifest.xml file and change the version.
Vivek Jagga - MCTS SharePoint
SharePointExcellence

An internal tool or library returned an error

Similar Messages

Maybe you are looking for