Annoying error message: ieee80211 phy0: invalid plcp cck rate (0)

Greetings Fellow Forumers!
I have an annoying issue caused by (I think) the firmware (carl9170) necessary to allow my USB NIC to work. The issue itself is that this message will pop up on my console and TTY:
ieee80211 phy0: invalid plcp cck rate (0)
I have searched the forums and found nothing (as of yet). I have, however, found some sparse information on the Internet but it isn't very helpful. Most of what I've read describes the behaviour itself (the error messages spamming the screen) and developers who figured out that it is the firmware causing this behaviour. I have yet to find information about how to solve this issue and stop the error from repeating itself ad nauseum. What I have read so far also hasn't cast any illumination about the underlying cause as to why the error message is being printed in the first place.
LSHW shows this about the USB device itself:
bus info: usb@2:2
logical name: wnet
capabilities:
ethernet,
Physical interface,
Wireless-LAN
configuration:
broadcast: yes
driver: [i]carl9170[/i]
driverversion: 3.15.8-1-ARCH
firmware: 1.9.6
ip: 192.168.1.74
link: yes
multicast: yes
wireless: IEEE 802.11abgn
If all I can do is suppress this message I'll be happy with that. Admittedly, though, I'll need a hint or two about how to do that.

Similar Messages

How do I retain my apps after I change my apple ID? Right now I'm unable to update any of the apps with the old apple ID. I get an error message about an invalid id or password. If I delete my apps and start over, I may lose the apps that I purchased...

How do I retain my apps after I change my apple ID? Right now I'm unable to update any of the apps with the old apple ID. I get an error message about an invalid id or Password. If I delete my appos and start over, I may lose the apps that I purchased (like the ones for $5 +....

Apps are always tied to the ID that was used to purchase them originally. Did you try entering your old password and see if that works?
If you need to sign out of your old account go to Settings>Store>Tap on your ID and sign out. Sign in with the new one.
you can also access your ID in the featured tab of the App Store. Swipe to the bottom of the screen and you will find it there as well.

Error Message - ORA-01722 Invalid Number

Hello:
I have the following situation. When I create an organization, a record is inserted into the following table, AGREEMENTS, and populates four fields.
I have an update form which selects the organization from the AGREEMENTS table so the user can populate the rest of the table. In addition, on this form, there is a drop-down box which allows the user to select the name of a legal document along with the version of the document in which the user needs to select. This select list is created via an LOV joining three tables. The item name for this select list is :P6_DOCUMENT.
The code for the LOV is:
SELECT S.DOC_NAME||' - '|| O.VERSION_NO AS DOC, O.ORG_DOC_CURR_KEY
FROM SUPPORTING_DOCS S,
     ORG_DOC_CURR_VER O,
     AGREEMENTS H
WHERE
    S.DOC_TYPE = 'HISA'
AND S.SUPPORTING_DOC_KEY = O.SUPPORTING_DOC_KEY
AND H.ORG_KEY_LE = O.ORG_KEY
AND O.ORG_KEY=:P6_ORG_KEY_LEWhen the user completes the form, the SUBMIT process is a PL/SQL block consisting of an UPDATE statement to update the AGREEMENTS table based on the selected organization and an INSERT statement to insert a record into the AGREEMENTS_DOC table to store the value stored in :P7_DOCUMENT.
Ok, now here is where my problem starts.
When I first bring up the form and I select the organization I want to update, I click the Search button to find the organization and I receive the following error message: ORA-01722 Invalid Number.
At this point all I'm doing is a basic search. There is no insert/update or anything going on. I'm not understanding why I would be receiving this error message.
The search is based on the database column ORG_KEY_LE whose datatype is NUMBER.
In my application, the item assigned to ORG_KEY_LE is P6_ORG_KEY_LE.
I have a PL/SQL block process created (On Load-Before Header) in the Page Rendering area of my page definition. The PL/SQL code that is written is:
BEGIN
IF :P6_SEARCH_ORG != '0' THEN
:P6_ORG_KEY_LE := :P6_SEARCH_ORG;
END IF;
END;I then have an Item created, :P6_SEARCH_ORG, which is a Select List. In the LOV portion of the page for this item, I have the following:
select ORG_KEY_LE display_value, ORG_KEY_LE return_value
from AGREEMENTS
order by 1The reason for using this table is because this table contains the newly created organization which needs to be updated with the remaining columns of data.
I then have a Search button in the Button area which has the following settings:
Button Position: Region Template Position #CHANGE#.
Condition Type: Value of Item in Express 1 is NULL.
Expression 1: :P6_ORG_KEY_LE.
To troubleshoot this problem, I created two pages, one page to do the UPDATE and the second page to do the INSERT.
The SEARCH functionality in both pages are identical.
When I run my UPDATE page, which only involves updating the missing fields, the process works. I have my search box, I'm able to search for the organization, make my updates, and I'm good.
When I run my INSERT page, which involves inserting the record with the assigned document, I receive the error message after I click the SEARCH button. In order to INSERT the record into this table, I first need to SELECT the organization that was UPDATED in the AGREEMENTS table (using the UPDATE page described in above paragraph). When I select the organization, the user can then assign the appropriate legal document to the organization and insert the record into the AGREEMENTS_DOC table.
Can someone help me with this error message? I'm not sure why I am able to perform my SEARCH on a page with the UPDATE statement, not able to perform the SEARCH on the page with my INSERT statement, and not be able to perform the SEARCH on the page that combines the UPDATE and INSERT statements.
I did some more troubleshooting and I do believe my SUBMIT process which contains the INSERT statement is the issue. I created a fourth page which doesn't have a SUBMIT process. I brought up the form, searched for my organization and the information for that organization appeared. The problem is definately with my UPDATE/INSERT process.
The PL/SQL block for the Submit process is the following:
BEGIN
update
    MDD.HISA_AGREEMENTS
     set
       LAST_UPDATED_BY=V('APP_USER'),
       APPROVER_SALUTATION=:P6_APPROVER_SALUTATION,
       APPROVER_FIRST_NAME=:P6_APPROVER_FIRST_NAME,
       APPROVER_MIDDLE_INITIAL=:P6_APPROVER_MIDDLE_INITIAL,
       APPROVER_LAST_NAME=:P6_APPROVER_LAST_NAME,
       APPROVER_NAME_SUFFIX=:P6_APPROVER_NAME_SUFFIX,
       APPROVER_EMAIL_ADDR=:P6_APPROVER_EMAIL_ADDR,
       SPONSOR_EMAIL_ADDR=:P6_SPONSOR_EMAIL_ADDR,
       APPROVER_TITLE=:P6_APPROVER_TITLE
where
      ORG_KEY_LE=:P6_ORG_KEY_LE
INSERT INTO
    HISA_AGREEMENT_DOCS
      (HISA_AGREEMENT_DOC_KEY,
       ORG_KEY_LE,
       APPLICATION_KEY,
       STATUS,
       STATUS_DATE,
       CREATED_BY,
       ORG_DOC_CURR_KEY)
VALUES
      (HISA_AGREEMENT_DOC_KEY_SEQ.NEXTVAL,
       :P6_ORG_KEY_LE,
       :P6_APPLICATION_KEY,
       'C',
       SYSDATE,
       V('APP_USER'),
       :P6_DOCUMENT)
END;There is something wrong with the above statement and I do not understand what it could be. Can someone help?
Thanks for the help.

Hi,
I believe you are on to something.
The select list for item :P6_DOCUMENT appears when I first bring up the form. When I select my organization and receive the error message, I clicked on the Session in the Developer's bar. The value in item/field :P6_DOCUMENT shows %null%.
This is the path in which my user would like to accomplish her task:
1. Select an organization
2. Display the information for that organization from the AGREEMENTS table
3. Enter the data for the remaining fields in the AGREEMENTS table
4. Select the document (:P6_DOCUMENT) from the drop-down.
5. Click Submit
6. Update the AGREEMENTS table with data entered in #3.
7. Insert a record into the AGREEMENTS_DOC table with the selection from #4.
Somehow I need the :P6_DOCUMENT field not to show the %null% during the SEARCH functionality. I think that is causing the problem.
How do I fix this?

Error Message (ORA-01722: invalid number) when add amount into Number field

I am using VB.net, trying to insert data into a field called amt with Data Type 'Number'.
my vb.net code is as follows
Dim oradb As String = DatabaseConnectionString
Dim AmountValue As Decimal = 123.45
'get the connection
Dim conn As New OracleConnection(oradb)
'open the database connection
conn.Open()
'create oracle command
Dim cmd As New OracleCommand("INSERT INTO TBL1 (AMT) VALUES (:AMT)", conn)
cmd.CommandType = CommandType.Text
cmd.Parameters.Add(":AMT", OracleDbType.Decimal, AmountValue, ParameterDirection.Input)
'Execute
cmd.ExecuteNonQuery()
I got error message "ORA-01722: invalid number". Please help

Did you also change the below line before inserting Integer 123:
cmd.Parameters.Add(":AMT", OracleDbType.Decimal, AmountValue, ParameterDirection.Input)
to
cmd.Parameters.Add(":AMT", OracleDbType.Integer, AmountValue, ParameterDirection.Input)

Itunes was working fine. Tries to install latest upgrade and get error message about an invalid character in the path "Program Files (x86)". PC, Win7, nothing else appears to be having same issue.

Itunes was working fine. Tried to install latest upgrade and get error message about an invalid character in the path "Program Files (x86)". PC, Win7, nothing else appears to be having same issue. Program still works, simply cannor upgrade.

Thanks b noir,
I tried this solution without success. After FixIt ran and didn't find a problem, either in looking for issues with "software upgrade" or "iTunes" it kindly offered to help me uninstall iTunes. I had thought of this as a possibilty but it seems to me that if you do that you lose a lot of "non-native-to-Apple" information you might have entered. I did this once and recovery was painfull. Is there a way to uninstall iTunes without losing all of that sort of thing? Any help would be appreciated.

How can I overcome error message "missing or invalid personalisation info" when trying to re-install Elements 3. I need to re-install Elements 3,

How can I overcome error message "missing or invalid personalisation info" when trying to re-install Elements 3. I need to re-install Elements 3,
@ Alternatively purchase an Elements 9 or 10. Holding Elements13 but that needs OS 10.8 (Lion) and much of my data is in Appleworks, which is incompatble
Apologies if I am using this incorrectly. My first time here

Hi. Thanks for coming back to me. I am using Mountain Leopard (OSX 10.6.8). Had major problem and have re-formatted my H/D and re-installing software. Must have lost a file in the process. Would upgrade to Lion only I have a lot of vital data in Officeworks, but that is incompatible with Lion.

HT201303 I have changed all of my billing info to the correct info. Why am I still getting an error message that says invalid security code?

I have changed all of my billing info to the correct info. Why am I still getting an error message that says invalid security code? I have an IPod.

Welcome to the Apple Community.
The following article(s) may help you.
Credit card security code or postcode issues.

How do I fix Creative Suite CS2 reinstall with error message "Missing or Invalid Personalization Inf

How do I fix Creative Suite CS2 reinstall on same Windows 7 Pro machine, with error message "Missing or Invalid Personalization Information / Missing Resources Library" when I attempt to reinstall from installation disk set? Was having trouble with Adobe Acrobat Pro 8; Uninstalled and am now stuck. You can email me if you like at [email protected] Thank you.

Hi Bill:
     I don't remember deactivating (after my XP PRO harddrive scattered)
when I did the first Windows 7 pro install of these programs and it went
fairly well except AA8 was a little problematic when converting from MS
Word.
     In my case the AA8 came with a Studio 8 suite of programs as follows:
     1) A Studio 8 installation disk
     2) A Creative Suite CS2 Premium set of installation disks.
     3) A Creative Suite 2.3 Premium upgrade disk with AA8
     I uninstalled AA8 and when I tried reinstallation the directions
said to do the Creative Suite CS2 Premium set of installation disks
first followed by the Creative Suite 2.3 Premium upgrade disk with AA8.
Now I'm stuck; What a mess.
     Thanks for trying to help.
     I will do as you suggest and go to
http://forums.adobe.com/community/creativesuites but FYI:
Bob Lane

Install: Error Message from mount, invalid boot interface"

Hi,
I'm booting into installation from CD1, and after the configuration assistant screen, I select the CD as the boot device, then get the error screen:
"Error Message from mount, invalid boot interface".
I've tried re-burning a new CD, but get the same error.
Any ideas to resolve this? Thanks in advance
Solaris 9 x86 12/02. AMD Duron 1300, EIDE CD Drive / 40Gb internal HD

Not up on my x86 here, and it has been a long time since I was installing from CD, but shouldn't your book device be the disk where you want the installation to go (in your case the presumable 2nd partition on your 40Gb disk).

Error Message...Invalid Drive E when loading ITunes

I have tried to download ITunes for 3 days straight, I keep getting an error message that I have an invalid Drive E. I have done disk clean up, defrag, cleaned out cookies and temp files, what else can I do? Does anyone else get this message? I am dying to use my new phone but I can not unlock or register it.

Bissley,
I have received this error in the past and it is usually caused by Windows automatically changing your external drive letters when you install. There are two ways around it; first, follow the directions provided by b noir. Second, within iTunes go to Edit > Preferences > Advanced
Under the advanced options you'll see a recessed section called "iTunes Media folder location". Although you may have set this in the past it, if Windows changed your drive letters it will no longer be valid. Default is usually "C:\blah\blah\mymusic"
Changing it just a matter of clicking "change" and finding your music folder again or change your drive letter back (if it changed at all).
If Windows is changing your drive letters, it is best to set them yourself so that everytime you plug in the devices they use the letter you assigned. Here is a link for that process:
http://windows.microsoft.com/en-US/windows-vista/Change-add-or-remove-a-drive-le tter
Hope it helps.

While opening Planning Sheet Error message came like : Invalid Offset ....

Hi ,
I uploaded the data and when we are trying to open planning sheet Its showing error message :
Invalid offset for {XYZ-ITEM: Supplier_DM : CP1_Yield:2012-Q2]
We encountered a problem performing your request.
Please notify Oracle , referring to error tag [gdpdjn].
And error Tag and ITEM change with every trial.
Please let us know your thoughts. And I would be grateful if somebody can help to decipher that error tags eg.[gdpdjn] also.
Thanks
Lokesh Rathi

When Base data is updated using Uploadable Report instead of updating aganist scenario we got this error.Oracle recommened not updating base data using uploadable reports.
Thanks,
Hari Devarapalli
Edited by: Hari Devarapalli on Jun 13, 2011 11:46 AM

Error message when compiling invalid packages and procedures

Hi.
I have a routine for copying certain data from a production database to a test database. To do this I disable constraints and triggers, truncate tables, copy tables and enable triggers and constraints again.
Now several of my functions, procedures and packages are made invalid and marked with a red cross. In SQL Developer I can compile invalid functions, procedures and packages. When I compile functions it works fine, but when compiling procedures and packages I get the following error message:
An error was encountered performing the requested operation:
ORA-00904: "ATTRIBUTE": Invalid identifier
Vendor code 904
When I click OK on this message I get a confirmation saying:
Packages have been compiled with #0.CNT# errors.
I had this error in both the previous and the new version. Is this a bug or is there a way to come around it? When I copy and modify the SQL generated to perform this task and run it in SQL Plus it works fine.
I use Windows 2000 5.00.2195 Service Pack 4, SQL Developer version 1.2.1, Oracle 9.2.0.8.0 and Java version 1.5.0_11
Message was edited by:
SvSig

i have now upgraded to Java 1.6 update 2. I still get basically the same error, but it is presented a little bit differently:
An error was encountered performing the requested operation:
ORA-00904: "ATTRIBUTE": invalid identifier
00904. 00000 - "%s: invalid identifier"
*Cause:
*Action:
Vendor code 904
Are there other possible error causes than the operating system version and the database version?
We are going to install an Oracle 10 test database in a couple of weeks, so then I will find out whether the database version is the problem.

ANNOYING ERROR MESSAGE IN SYSTEM PREFERENCES!!! PLEASE HELP...

When I open System Preferences and click on the Network Settings icon, I get an error message that says "Your network settings have been changed by another application." It just gives the option to click "OK," but after I click "OK" it just keeps popping up. I end up having to Force Quit System Preferences. I've tried looking for the application that changed the settings, but I can't seem to figure out which one. I haven't installed any new programs in forever. This thing just seemed to pop up out of nowhere.
Any help with this would be greatly appreciated as this is annoying as ****...

Yes, it'd be the latest Security update and your use of a PPP setup I think...
Cure for Security update...
http://discussions.apple.com/thread.jspa?threadID=1730909&tstart=0
PS. I only use Software Update to see what is needed, then get them for real via...
http://www.apple.com/support/downloads/
That way I can wait a week or so, check the forums for potential problems, and get Permissions & such in order before installing.

Change the af:inputListOfValue error message when enter invalid value?

Hi all,
I am using JDeveloper 11.1.1.2.0
When I have af:inputListOfValue in page and put invalid value the error message will appear. I want to display my own error message. How can I change the LOV invalid number error message?
Thank You...
Sameh Nassar
Edited by: Sameh Nassar on Aug 20, 2010 5:52 PM

Refer:
Section 28.10, "Customizing Error Handling"
in below link:
http://download.oracle.com/docs/cd/E14571_01/web.1111/b31974/web_adv.htm#ADFFD19884
Amit
I guess above post won't you much .. I spend sometime on this issue as it got my attention
It seems there is very less info on how can we over ride default bundle message for the "Invalid Value" error we get
however you can create your validator for LOV and handle the validation and message in that..
Here is the link that provides a good detail on how to create / register a validator.
Once registered you can update the Validator ID of f:validate of LOV and remove the binding property value.
Edited by: amseth on Aug 20, 2010 1:03 PM

Error message - ICERegions.html invalid???

I am currently working my way through the Adobe Dreamweaver CS4 "Classroom in a book" - I am in the middle of Chapter 7, I've saved my document and then opened it up again and suddenly i have an error message that says:
"The following translators were not loaded due to errors: ICERegions.html has configuration information that is invalid"
This is the first time have seen this error; could someone explain 1) what it means and 2) what can I do about it.
I am using a PC with XP OS.
Thanks for your help on this.

No, it's not "a bug". Your preference file(s) just got corrupted.
Reinstalling without nuking the preferences is futile, as you end up right back where you started.
Preferences files vary by name and location for each version of Photoshop.
To re-create the preferences files for Photoshop, start the application while holding down Ctrl+Alt+Shift (Windows) or Command+Option+Shift (Mac OS). Then, click Yes to the message, "Delete the Adobe Photoshop Settings file?"
Note: If this process doesn't work for you while you're using a wireless (Bluetooth) keyboard, attach a wired keyboard and retry.

Annoying error message: ieee80211 phy0: invalid plcp cck rate (0)

Similar Messages

Maybe you are looking for