Annoying Problem when building under Eclipse

Hi all,
Please, does any one faced this problem with Eclipse (2.1.x) using JCOP :
some times when I try to build the project, using menu Project->Rebuild Project, I get an error in the Task view saying : "The project was not built due to "Problems encountered while deleting resources.". Fix the problem, then try refreshing this project and rebuilding it since it may be inconsistent.     ".
Often it's solved if I make a "Rebuild all" but sometimes it fails and I still get the error.
I can get rid of it, but almose by trying and trying again, and I want to know how to be able to build my project without this problem.
Thanx

You can fous to left side "Package Explorer" sub-window for your project, and press "F5" to refresh,
after that retry to build project again.

Similar Messages

  • Language Problem when building executable

    I'm having a weird issue when building executables.  Labview seems to forget the english language.  I have tried selecting English exclusively as the run time language but when i do that i get a "No supported languages installed!" error. Everthing works fine in the development environment.  It only seems to apply to application menus and not custom user menus.  Thanks for any insight.  
    Solved!
    Go to Solution.
    Attachments:
    Language.png ‏3 KB

    Hello Jed394,
    I took a look into the issue, just to be sure the error thrown was “No support Language Installed,” correct?  Check to see if the language of your operating system and the language LabVIEW is using is English.  If these are both English, then it looks like this is an error due to installation issues in the run-time engine.  Try to perform a repair by going through the install menu of LabVIEW.  The following link will help you with the repair: http://digital.ni.com/public.nsf/allkb/FE6B641E86E55AF2862576DE00038001?OpenDocument
    If you have any further issues, please let me know. Thanks!
    Matt S.
    Industrial Communications Product Support Engineer
    National Instruments

  • Problem starting Weblogic under Eclipse

    Hello!
    When I am trying to start the Weblogic server from Eclipse i receive the following error:
    <12.12.2006 11.20 Uhr CET> <Notice> <WebLogicServer> <BEA-000395> <Following extensions directory contents added to the end of the classpath:
    C:\Programme\bea\user_projects\domains\curves_domain\lib\quartz-all-1.5.2.jar;C:\Programme\bea\weblogic_ejb30_preview\platform\lib\p13n\p13n-schemas.jar;C:\Programme\bea\weblogic_ejb30_preview\platform\lib\p13n\p13n_common.jar;C:\Programme\bea\weblogic_ejb30_preview\platform\lib\p13n\p13n_system.jar;C:\Programme\bea\weblogic_ejb30_preview\platform\lib\wlp\netuix_common.jar;C:\Programme\bea\weblogic_ejb30_preview\platform\lib\wlp\netuix_schemas.jar;C:\Programme\bea\weblogic_ejb30_preview\platform\lib\wlp\netuix_system.jar>
    <12.12.2006 11.20 Uhr CET> <Info> <WebLogicServer> <BEA-000377> <Starting WebLogic Server with Java HotSpot(TM) Client VM Version 1.5.0_07-b03 from Sun Microsystems Inc.>
    <12.12.2006 11.20 Uhr CET> <Info> <Management> <BEA-141107> <Version: WebLogic Server 9.2  Mon May 15 23:48:19 EDT 2006 763445 >
    <12.12.2006 11.20 Uhr CET> <Critical> <WebLogicServer> <BEA-000362> <Server failed. Reason:
    There are 1 nested errors:
    weblogic.management.ManagementException: [Management:141266]Parsing Failure in config.xml: javax.xml.namespace.QName; local class incompatible: stream classdesc serialVersionUID = 4418622981026545151, local class serialVersionUID = -9120448754896609940
         at weblogic.management.provider.internal.RuntimeAccessImpl.<init>(RuntimeAccessImpl.java:122)
         at weblogic.management.provider.internal.RuntimeAccessService.start(RuntimeAccessService.java:38)
         at weblogic.t3.srvr.ServerServicesManager.startService(ServerServicesManager.java:374)
         at weblogic.t3.srvr.ServerServicesManager.startInStandbyState(ServerServicesManager.java:125)
         at weblogic.t3.srvr.T3Srvr.initializeStandby(T3Srvr.java:630)
         at weblogic.t3.srvr.T3Srvr.startup(T3Srvr.java:402)
         at weblogic.t3.srvr.T3Srvr.run(T3Srvr.java:361)
         at weblogic.Server.main(Server.java:67)
    Caused by: java.io.InvalidClassException: javax.xml.namespace.QName; local class incompatible: stream classdesc serialVersionUID = 4418622981026545151, local class serialVersionUID = -9120448754896609940
         at java.io.ObjectStreamClass.initNonProxy(ObjectStreamClass.java:546)
         at java.io.ObjectInputStream.readNonProxyDesc(ObjectInputStream.java:1551)
         at java.io.ObjectInputStream.readClassDesc(ObjectInputStream.java:1465)
         at java.io.ObjectInputStream.readOrdinaryObject(ObjectInputStream.java:1698)
         at java.io.ObjectInputStream.readObject0(ObjectInputStream.java:1304)
         at java.io.ObjectInputStream.readObject(ObjectInputStream.java:349)
         at java.util.HashMap.readObject(HashMap.java:1012)
         at sun.reflect.NativeMethodAccessorImpl.invoke0(Native Method)
         at sun.reflect.NativeMethodAccessorImpl.invoke(NativeMethodAccessorImpl.java:39)
         at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:25)
         at java.lang.reflect.Method.invoke(Method.java:585)
         at java.io.ObjectStreamClass.invokeReadObject(ObjectStreamClass.java:946)
         at java.io.ObjectInputStream.readSerialData(ObjectInputStream.java:1818)
         at java.io.ObjectInputStream.readOrdinaryObject(ObjectInputStream.java:1718)
         at java.io.ObjectInputStream.readObject0(ObjectInputStream.java:1304)
         at java.io.ObjectInputStream.defaultReadFields(ObjectInputStream.java:1917)
         at java.io.ObjectInputStream.readSerialData(ObjectInputStream.java:1841)
         at java.io.ObjectInputStream.readOrdinaryObject(ObjectInputStream.java:1718)
         at java.io.ObjectInputStream.readObject0(ObjectInputStream.java:1304)
         at java.io.ObjectInputStream.readObject(ObjectInputStream.java:349)
         at java.util.HashMap.readObject(HashMap.java:1013)
         at sun.reflect.NativeMethodAccessorImpl.invoke0(Native Method)
         at sun.reflect.NativeMethodAccessorImpl.invoke(NativeMethodAccessorImpl.java:39)
         at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:25)
         at java.lang.reflect.Method.invoke(Method.java:585)
         at java.io.ObjectStreamClass.invokeReadObject(ObjectStreamClass.java:946)
         at java.io.ObjectInputStream.readSerialData(ObjectInputStream.java:1818)
         at java.io.ObjectInputStream.readOrdinaryObject(ObjectInputStream.java:1718)
         at java.io.ObjectInputStream.readObject0(ObjectInputStream.java:1304)
         at java.io.ObjectInputStream.defaultReadFields(ObjectInputStream.java:1917)
         at java.io.ObjectInputStream.readSerialData(ObjectInputStream.java:1841)
         at java.io.ObjectInputStream.readOrdinaryObject(ObjectInputStream.java:1718)
         at java.io.ObjectInputStream.readObject0(ObjectInputStream.java:1304)
         at java.io.ObjectInputStream.readObject(ObjectInputStream.java:349)
         at com.bea.staxb.buildtime.internal.bts.BindingFile.forSer(BindingFile.java:77)
         at com.bea.staxb.buildtime.internal.tylar.RuntimeTylar.getBindingFiles(RuntimeTylar.java:111)
         at com.bea.staxb.buildtime.internal.tylar.RuntimeTylar.getBindingLoader(RuntimeTylar.java:90)
         at com.bea.staxb.runtime.internal.BindingContextFactoryImpl.createBindingContext(BindingContextFactoryImpl.java:66)
         at com.bea.staxb.runtime.internal.BindingContextFactoryImpl.createBindingContext(BindingContextFactoryImpl.java:52)
         at weblogic.descriptor.internal.MarshallerFactory.<init>(MarshallerFactory.java:48)
         at weblogic.descriptor.DescriptorManager$DefaultMarshallerFactorySingleton.<clinit>(DescriptorManager.java:40)
         at weblogic.descriptor.DescriptorManager.getDefaultMF(DescriptorManager.java:116)
         at weblogic.descriptor.DescriptorManager.getMarshallerFactory(DescriptorManager.java:125)
         at weblogic.descriptor.DescriptorManager.getDescriptorFactory(DescriptorManager.java:153)
         at weblogic.descriptor.DescriptorManager.createDescriptor(DescriptorManager.java:277)
         at weblogic.management.provider.internal.DescriptorManagerHelper.loadDescriptor(DescriptorManagerHelper.java:52)
         at weblogic.management.provider.internal.RuntimeAccessImpl$IOHelperImpl.parseXML(RuntimeAccessImpl.java:599)
         at weblogic.management.provider.internal.RuntimeAccessImpl.parseNewStyleConfig(RuntimeAccessImpl.java:230)
         at weblogic.management.provider.internal.RuntimeAccessImpl.<init>(RuntimeAccessImpl.java:110)
         ... 7 more
    >
    <12.12.2006 11.20 Uhr CET> <Notice> <WebLogicServer> <BEA-000365> <Server state changed to FAILED>
    <12.12.2006 11.20 Uhr CET> <Error> <WebLogicServer> <BEA-000383> <A critical service failed. The server will shut itself down>
    <12.12.2006 11.20 Uhr CET> <Notice> <WebLogicServer> <BEA-000365> <Server state changed to FORCE_SHUTTING_DOWN> I have seen this problem for AIX, but I am using Weblogic under Windows XP

    hi jprivas,
    i am having the same problem (but with wls 9.0). please, can you share with us how you solved your problem?
    many thanks

  • Consistent annoying problem when compiling and installing Apache modules.

    Every time I build and install mod_jk for Apache (Since binaries are no longer available for Apache 1.3.x on Mac OS X, we have to build it ourselves.), everything goes smoothly until the final 'sudo make install,' and then it finishes with:
    Libraries have been installed in:
    /usr/libexec
    Which is nice, but they're supposed to be installed in /usr/libexec/httpd in Mac OS X. (I don't know if this is a problem for Mac OS X Server too, but I'm using regular old Mac OS X 10.4.10, so I'm posting this here.)
    I'm using this when I call configure:
    % ./configure --with-apxs=/usr/sbin/apxs
    and /usr/sbin/apxs says:
    my $CFG_LIBEXECDIR = q(/usr/libexec/httpd);
    but the resulting Makefile says:
    libexecdir=${APACHE_DIR}/libexec
    So it appears to be ignoring the definition from apxs. It also appears that the definition of libexecdir appears to be variable only up until libexec. It looks like you can't tell it to use a subdirectory.
    It's easy enough to just move the installed files into the httpd directory, with sudo mv /usr/libexec/mod_jk.* usr/libexec/httpd, but it's a little annoying to have to remember to do this every time I upgrade mod_jk.
    Has anybody else run into this with this or other modules? Is it a bug that should be reported to either Apple or Apache? Does anybody have a better solution than moving the files?

    MoonSwan wrote:I have a desktop system and a netbook that I would like to have hibernating when they aren't being used.  The wiki outlined roughly how to accomplish this with this page:  https://wiki.archlinux.org/index.php/Tuxonice
    I downloaded from the AUR the kernel26-ice 2.6.38-4 to compile and install.
    Hm... netbook.
    If you don't mind trying bfs and bfq too, then you could give the pf-kernel that is mentioned in the wiki too a try:
    http://aur.archlinux.org/packages.php?ID=50956
    It has a repository here:
    [pfkernel]
    Server = http://dl.dropbox.com/u/11734958/$arch
    and a thread: https://bbs.archlinux.org/viewtopic.php?id=103462
    I'm not quite sure how netbook performance is affected by BFS...
    It has the bonus to already be based on 3.0.
    Last edited by Cdh (2011-07-28 20:35:50)

  • Problem when building a view

    Hi,
    I am new in JDeveloper
    I build a model in JDeveloper
    but when I build the web pages
    I accidentally face the following problem
    can any one help me?
    *** Using port 7101 ***
    "H:\Documents and Settings\Administrator\Application Data\JDeveloper\system11.1.1.4.37.59.23\DefaultDomain\bin\startWebLogic.cmd"
    [waiting for the server to complete its initialization...]
    JAVA Memory arguments: -Xms256m -Xmx512m -XX:CompileThreshold=8000 -XX:PermSize=128m -XX:MaxPermSize=512m
    WLS Start Mode=Development
    CLASSPATH=H:\oracle\MIDDLE~1\ORACLE~1\modules\oracle.jdbc_11.1.1\ojdbc6dms.jar;H:\oracle\MIDDLE~1\patch_wls1034\profiles\default\sys_manifest_classpath\weblogic_patch.jar;H:\oracle\MIDDLE~1\patch_jdev1111\profiles\default\sys_manifest_classpath\weblogic_patch.jar;H:\oracle\MIDDLE~1\JDK160~2\lib\tools.jar;H:\oracle\MIDDLE~1\WLSERV~1.3\server\lib\weblogic_sp.jar;H:\oracle\MIDDLE~1\WLSERV~1.3\server\lib\weblogic.jar;H:\oracle\MIDDLE~1\modules\features\weblogic.server.modules_10.3.4.0.jar;H:\oracle\MIDDLE~1\WLSERV~1.3\server\lib\webservices.jar;H:\oracle\MIDDLE~1\modules\ORGAPA~1.1/lib/ant-all.jar;H:\oracle\MIDDLE~1\modules\NETSFA~1.0_1/lib/ant-contrib.jar;H:\oracle\MIDDLE~1\ORACLE~1\modules\oracle.jrf_11.1.1\jrf.jar;H:\oracle\MIDDLE~1\WLSERV~1.3\common\derby\lib\derbyclient.jar;H:\oracle\MIDDLE~1\WLSERV~1.3\server\lib\xqrl.jar
    PATH=H:\oracle\MIDDLE~1\patch_wls1034\profiles\default\native;H:\oracle\MIDDLE~1\patch_jdev1111\profiles\default\native;H:\oracle\MIDDLE~1\WLSERV~1.3\server\native\win\32;H:\oracle\MIDDLE~1\WLSERV~1.3\server\bin;H:\oracle\MIDDLE~1\modules\ORGAPA~1.1\bin;H:\oracle\MIDDLE~1\JDK160~2\jre\bin;H:\oracle\MIDDLE~1\JDK160~2\bin;E:\oracle\product\10.2.0\db_1\bin;H:\oracle\app\product\11.1.0\db_1\bin;H:\WINDOWS\system32;H:\WINDOWS;H:\WINDOWS\System32\Wbem;H:\oracle\MIDDLE~1\WLSERV~1.3\server\native\win\32\oci920_8
    * To start WebLogic Server, use a username and *
    * password assigned to an admin-level user. For *
    * server administration, use the WebLogic Server *
    * console at http:\\hostname:port\console *
    starting weblogic with Java version:
    java version "1.6.0_21"
    Java(TM) SE Runtime Environment (build 1.6.0_21-b51)
    Java HotSpot(TM) Client VM (build 17.0-b17, mixed mode)
    Starting WLS with line:
    H:\oracle\MIDDLE~1\JDK160~2\bin\java -client -Xms256m -Xmx512m -XX:CompileThreshold=8000 -XX:PermSize=128m -XX:MaxPermSize=512m -Dweblogic.Name=DefaultServer -Djava.security.policy=H:\oracle\MIDDLE~1\WLSERV~1.3\server\lib\weblogic.policy -Djavax.net.ssl.trustStore=H:\oracle\Middleware\wlserver_10.3\server\lib\DemoTrust.jks -Dweblogic.nodemanager.ServiceEnabled=true -Xverify:none -da -Dplatform.home=H:\oracle\MIDDLE~1\WLSERV~1.3 -Dwls.home=H:\oracle\MIDDLE~1\WLSERV~1.3\server -Dweblogic.home=H:\oracle\MIDDLE~1\WLSERV~1.3\server -Djps.app.credential.overwrite.allowed=true -Dcommon.components.home=H:\oracle\MIDDLE~1\ORACLE~1 -Djrf.version=11.1.1 -Dorg.apache.commons.logging.Log=org.apache.commons.logging.impl.Jdk14Logger -Ddomain.home=H:\DOCUME~1\ADMINI~1\APPLIC~1\JDEVEL~1\SYSTEM~1.23\DEFAUL~1 -Djrockit.optfile=H:\oracle\MIDDLE~1\ORACLE~1\modules\oracle.jrf_11.1.1\jrocket_optfile.txt -Doracle.server.config.dir=H:\DOCUME~1\ADMINI~1\APPLIC~1\JDEVEL~1\SYSTEM~1.23\DEFAUL~1\config\FMWCON~1\servers\DefaultServer -Doracle.domain.config.dir=H:\DOCUME~1\ADMINI~1\APPLIC~1\JDEVEL~1\SYSTEM~1.23\DEFAUL~1\config\FMWCON~1 -Digf.arisidbeans.carmlloc=H:\DOCUME~1\ADMINI~1\APPLIC~1\JDEVEL~1\SYSTEM~1.23\DEFAUL~1\config\FMWCON~1\carml -Digf.arisidstack.home=H:\DOCUME~1\ADMINI~1\APPLIC~1\JDEVEL~1\SYSTEM~1.23\DEFAUL~1\config\FMWCON~1\arisidprovider -Doracle.security.jps.config=H:\DOCUME~1\ADMINI~1\APPLIC~1\JDEVEL~1\SYSTEM~1.23\DEFAUL~1\config\fmwconfig\jps-config.xml -Doracle.deployed.app.dir=H:\DOCUME~1\ADMINI~1\APPLIC~1\JDEVEL~1\SYSTEM~1.23\DEFAUL~1\servers\DefaultServer\tmp\_WL_user -Doracle.deployed.app.ext=\- -Dweblogic.alternateTypesDirectory=H:\oracle\MIDDLE~1\ORACLE~1\modules\oracle.ossoiap_11.1.1,H:\oracle\MIDDLE~1\ORACLE~1\modules\oracle.oamprovider_11.1.1 -Djava.protocol.handler.pkgs=oracle.mds.net.protocol -Dweblogic.jdbc.remoteEnabled=false -Dwsm.repository.path=H:\DOCUME~1\ADMINI~1\APPLIC~1\JDEVEL~1\SYSTEM~1.23\DEFAUL~1\oracle\store\gmds -Dweblogic.management.discover=true -Dwlw.iterativeDev= -Dwlw.testConsole= -Dwlw.logErrorsToConsole= -Dweblogic.ext.dirs=H:\oracle\MIDDLE~1\patch_wls1034\profiles\default\sysext_manifest_classpath;H:\oracle\MIDDLE~1\patch_jdev1111\profiles\default\sysext_manifest_classpath weblogic.Server
    <Mar 28, 2011 5:29:05 PM IST> <Info> <Security> <BEA-090905> <Disabling CryptoJ JCE Provider self-integrity check for better startup performance. To enable this check, specify -Dweblogic.security.allowCryptoJDefaultJCEVerification=true>
    <Mar 28, 2011 5:29:05 PM IST> <Info> <Security> <BEA-090906> <Changing the default Random Number Generator in RSA CryptoJ from ECDRBG to FIPS186PRNG. To disable this change, specify -Dweblogic.security.allowCryptoJDefaultPRNG=true>
    <Mar 28, 2011 5:29:05 PM IST> <Info> <WebLogicServer> <BEA-000377> <Starting WebLogic Server with Java HotSpot(TM) Client VM Version 17.0-b17 from Sun Microsystems Inc.>
    <Mar 28, 2011 5:29:06 PM IST> <Info> <Management> <BEA-141107> <Version: WebLogic Server 10.3.4.0 Fri Dec 17 20:47:33 PST 2010 1384255 >
    <Mar 28, 2011 5:29:10 PM IST> <Notice> <WebLogicServer> <BEA-000365> <Server state changed to STARTING>
    <Mar 28, 2011 5:29:10 PM IST> <Info> <WorkManager> <BEA-002900> <Initializing self-tuning thread pool>
    <Mar 28, 2011 5:29:10 PM IST> <Notice> <LoggingService> <BEA-320400> <The log file H:\Documents and Settings\Administrator\Application Data\JDeveloper\system11.1.1.4.37.59.23\DefaultDomain\servers\DefaultServer\logs\DefaultServer.log will be rotated. Reopen the log file if tailing has stopped. This can happen on some platforms like Windows.>
    <Mar 28, 2011 5:29:11 PM IST> <Notice> <LoggingService> <BEA-320401> <The log file has been rotated to H:\Documents and Settings\Administrator\Application Data\JDeveloper\system11.1.1.4.37.59.23\DefaultDomain\servers\DefaultServer\logs\DefaultServer.log00012. Log messages will continue to be logged in H:\Documents and Settings\Administrator\Application Data\JDeveloper\system11.1.1.4.37.59.23\DefaultDomain\servers\DefaultServer\logs\DefaultServer.log.>
    <Mar 28, 2011 5:29:11 PM IST> <Notice> <Log Management> <BEA-170019> <The server log file H:\Documents and Settings\Administrator\Application Data\JDeveloper\system11.1.1.4.37.59.23\DefaultDomain\servers\DefaultServer\logs\DefaultServer.log is opened. All server side log events will be written to this file.>
    <Mar 28, 2011 5:29:21 PM IST> <Notice> <Security> <BEA-090082> <Security initializing using security realm myrealm.>
    <Mar 28, 2011 5:29:33 PM IST> <Notice> <WebLogicServer> <BEA-000365> <Server state changed to STANDBY>
    <Mar 28, 2011 5:29:33 PM IST> <Notice> <WebLogicServer> <BEA-000365> <Server state changed to STARTING>
    <Mar 28, 2011 5:29:42 PM IST> <Warning> <J2EE> <BEA-160195> <The application version lifecycle event listener oracle.security.jps.wls.listeners.JpsAppVersionLifecycleListener is ignored because the application NGEST is not versioned.>
    <Mar 28, 2011 5:29:44 PM IST> <Error> <HTTP> <BEA-101371> <There was a failure when processing annotations for application H:\Documents and Settings\Administrator\Application Data\JDeveloper\system11.1.1.4.37.59.23\o.j2ee\drs\NGEST\ViewControllerWebApp.war. Please make sure that the annotations are valid. The error is javax.faces.webapp.FacesServlet>
    <Mar 28, 2011 5:29:44 PM IST> <Error> <Deployer> <BEA-149205> <Failed to initialize the application 'NGEST' due to error weblogic.application.ModuleException: Failed to load webapp: 'ViewController'.
    weblogic.application.ModuleException: Failed to load webapp: 'ViewController'
         at weblogic.servlet.internal.WebAppModule.prepare(WebAppModule.java:393)
         at weblogic.application.internal.flow.ScopedModuleDriver.prepare(ScopedModuleDriver.java:176)
         at weblogic.application.internal.flow.ModuleListenerInvoker.prepare(ModuleListenerInvoker.java:199)
         at weblogic.application.internal.flow.DeploymentCallbackFlow$1.next(DeploymentCallbackFlow.java:517)
         at weblogic.application.utils.StateMachineDriver.nextState(StateMachineDriver.java:52)
         Truncated. see log file for complete stacktrace
    Caused By: java.lang.ClassNotFoundException: javax.faces.webapp.FacesServlet
         at weblogic.utils.classloaders.GenericClassLoader.findLocalClass(GenericClassLoader.java:297)
         at weblogic.utils.classloaders.GenericClassLoader.findClass(GenericClassLoader.java:270)
         at weblogic.utils.classloaders.ChangeAwareClassLoader.findClass(ChangeAwareClassLoader.java:64)
         at java.lang.ClassLoader.loadClass(ClassLoader.java:307)
         at java.lang.ClassLoader.loadClass(ClassLoader.java:248)
         Truncated. see log file for complete stacktrace
    >
    <Mar 28, 2011 5:29:50 PM IST> <Notice> <LoggingService> <BEA-320400> <The log file H:\Documents and Settings\Administrator\Application Data\JDeveloper\system11.1.1.4.37.59.23\DefaultDomain\servers\DefaultServer\logs\DefaultDomain.log will be rotated. Reopen the log file if tailing has stopped. This can happen on some platforms like Windows.>
    <Mar 28, 2011 5:29:50 PM IST> <Notice> <LoggingService> <BEA-320401> <The log file has been rotated to H:\Documents and Settings\Administrator\Application Data\JDeveloper\system11.1.1.4.37.59.23\DefaultDomain\servers\DefaultServer\logs\DefaultDomain.log00012. Log messages will continue to be logged in H:\Documents and Settings\Administrator\Application Data\JDeveloper\system11.1.1.4.37.59.23\DefaultDomain\servers\DefaultServer\logs\DefaultDomain.log.>
    <Mar 28, 2011 5:29:50 PM IST> <Notice> <Log Management> <BEA-170027> <The Server has established connection with the Domain level Diagnostic Service successfully.>
    <Mar 28, 2011 5:29:50 PM IST> <Notice> <WebLogicServer> <BEA-000365> <Server state changed to ADMIN>
    <Mar 28, 2011 5:29:50 PM IST> <Notice> <WebLogicServer> <BEA-000365> <Server state changed to RESUMING>
    <Mar 28, 2011 5:29:51 PM IST> <Notice> <Server> <BEA-002613> <Channel "Default[1]" is now listening on 127.0.0.1:7101 for protocols iiop, t3, ldap, snmp, http.>
    <Mar 28, 2011 5:29:51 PM IST> <Notice> <Server> <BEA-002613> <Channel "Default" is now listening on 192.168.1.17:7101 for protocols iiop, t3, ldap, snmp, http.>
    <Mar 28, 2011 5:29:51 PM IST> <Notice> <WebLogicServer> <BEA-000331> <Started WebLogic Admin Server "DefaultServer" for domain "DefaultDomain" running in Development Mode>
    <Mar 28, 2011 5:29:51 PM IST> <Notice> <WebLogicServer> <BEA-000365> <Server state changed to RUNNING>
    <Mar 28, 2011 5:29:51 PM IST> <Notice> <WebLogicServer> <BEA-000360> <Server started in RUNNING mode>
    [Running application NGEST on Server Instance IntegratedWebLogicServer...]
    IntegratedWebLogicServer startup time: 54578 ms.
    IntegratedWebLogicServer started.
    [05:29:53 PM] ---- Deployment started. ----
    [05:29:53 PM] Target platform is (Weblogic 10.3).
    [05:29:54 PM] Retrieving existing application information
    [05:29:54 PM] Running dependency analysis...
    [05:29:54 PM] Deploying 3 profiles...
    [05:30:08 PM] Wrote Web Application Module to H:\Documents and Settings\Administrator\Application Data\JDeveloper\system11.1.1.4.37.59.23\o.j2ee\drs\NGEST\ViewControllerWebApp.war
    [05:30:13 PM] Wrote Web Application Module to H:\Documents and Settings\Administrator\Application Data\JDeveloper\system11.1.1.4.37.59.23\o.j2ee\drs\NGEST\ModelWebApp.war
    [05:30:15 PM] Wrote Enterprise Application Module to H:\Documents and Settings\Administrator\Application Data\JDeveloper\system11.1.1.4.37.59.23\o.j2ee\drs\NGEST
    [05:30:15 PM] Redeploying Application...
    <Mar 28, 2011 5:30:16 PM IST> <Warning> <J2EE> <BEA-160195> <The application version lifecycle event listener oracle.security.jps.wls.listeners.JpsAppVersionLifecycleListener is ignored because the application NGEST is not versioned.>
    <Mar 28, 2011 5:30:19 PM IST> <Error> <HTTP> <BEA-101371> <There was a failure when processing annotations for application H:\Documents and Settings\Administrator\Application Data\JDeveloper\system11.1.1.4.37.59.23\o.j2ee\drs\NGEST\ViewControllerWebApp.war. Please make sure that the annotations are valid. The error is oracle.adfinternal.view.faces.bi.renderkit.graph.GraphServlet>
    <Mar 28, 2011 5:30:20 PM IST> <Error> <Deployer> <BEA-149265> <Failure occurred in the execution of deployment request with ID '1301326216265' for task '0'. Error is: 'weblogic.application.ModuleException: Failed to load webapp: 'ViewController''
    weblogic.application.ModuleException: Failed to load webapp: 'ViewController'
         at weblogic.servlet.internal.WebAppModule.prepare(WebAppModule.java:393)
         at weblogic.application.internal.flow.ScopedModuleDriver.prepare(ScopedModuleDriver.java:176)
         at weblogic.application.internal.flow.ModuleListenerInvoker.prepare(ModuleListenerInvoker.java:199)
         at weblogic.application.internal.flow.DeploymentCallbackFlow$1.next(DeploymentCallbackFlow.java:517)
         at weblogic.application.utils.StateMachineDriver.nextState(StateMachineDriver.java:52)
         Truncated. see log file for complete stacktrace
    Caused By: java.lang.ClassNotFoundException: oracle.adfinternal.view.faces.bi.renderkit.graph.GraphServlet
         at weblogic.utils.classloaders.GenericClassLoader.findLocalClass(GenericClassLoader.java:297)
         at weblogic.utils.classloaders.GenericClassLoader.findClass(GenericClassLoader.java:270)
         at weblogic.utils.classloaders.ChangeAwareClassLoader.findClass(ChangeAwareClassLoader.java:64)
         at java.lang.ClassLoader.loadClass(ClassLoader.java:307)
         at java.lang.ClassLoader.loadClass(ClassLoader.java:248)
         Truncated. see log file for complete stacktrace
    >
    <Mar 28, 2011 5:30:20 PM IST> <Warning> <Deployer> <BEA-149004> <Failures were detected while initiating deploy task for application 'NGEST'.>
    <Mar 28, 2011 5:30:20 PM IST> <Warning> <Deployer> <BEA-149078> <Stack trace for message 149004
    weblogic.application.ModuleException: Failed to load webapp: 'ViewController'
         at weblogic.servlet.internal.WebAppModule.prepare(WebAppModule.java:393)
         at weblogic.application.internal.flow.ScopedModuleDriver.prepare(ScopedModuleDriver.java:176)
         at weblogic.application.internal.flow.ModuleListenerInvoker.prepare(ModuleListenerInvoker.java:199)
         at weblogic.application.internal.flow.DeploymentCallbackFlow$1.next(DeploymentCallbackFlow.java:517)
         at weblogic.application.utils.StateMachineDriver.nextState(StateMachineDriver.java:52)
         Truncated. see log file for complete stacktrace
    Caused By: java.lang.ClassNotFoundException: oracle.adfinternal.view.faces.bi.renderkit.graph.GraphServlet
         at weblogic.utils.classloaders.GenericClassLoader.findLocalClass(GenericClassLoader.java:297)
         at weblogic.utils.classloaders.GenericClassLoader.findClass(GenericClassLoader.java:270)
         at weblogic.utils.classloaders.ChangeAwareClassLoader.findClass(ChangeAwareClassLoader.java:64)
         at java.lang.ClassLoader.loadClass(ClassLoader.java:307)
         at java.lang.ClassLoader.loadClass(ClassLoader.java:248)
         Truncated. see log file for complete stacktrace
    >
    #### Cannot run application NGEST due to error deploying to IntegratedWebLogicServer.
    [05:30:20 PM] #### Deployment incomplete. ####
    [05:30:20 PM] Remote deployment failed
    [Application NGEST stopped and undeployed from Server Instance IntegratedWebLogicServer]

    Hello,
    Just start the weblogic server and go to the console. In deployments tab force stop the application and delete that stopped application. Then run the application.

  • Problem in building an Eclipse installation with oomph

    Hallo,
    I am setting up an Eclipse distribution with several plugins needed to have a proper IDE for an Eclipse Project (GEF).
    When adding the plugins to Eclipse everything is Ok, until I install the Oomph Version Management Tool plugin.
    After installing the Oomph VMT Plugin, from the next startup I see the below error:
    Plugins contained in the Eclipse distribution.
    As specified in the GEF contributor guide, the GEF-IDE consists of
    Eclipse IDE for committers Mars R as base eclipse ( in my case is win32)
    API Tools Execution Environment Description v 1.0.1 from http://download.eclipse.org/releases/mars update site
    e(fx)clipse IDE - PDE version .2.0.0, from http://download.eclipse.org/efxclipse/updates-released/2.0.0/site/ update site
    m2e - Maven Integration for Eclipse - version 1.6.0, from http://download.eclipse.org/releases/mars update site
    Xtext Complete SDK - version 2.8.3, from http://download.eclipse.org/releases/mars update site
    Oomph Version Management Tool, from Oomph update site
    After installing the Oomph Version Management Tool plug-in, at the next Eclipse Startup I see the following error:
    An internal error occurred during: "Setup check".
    USER_HOME
    I was actually thinking my install was ok, but in bugzilla, I got that I did an "inconsistent installation" - see bug 473599.
    Indeed, I checked in the About eclipse features for the Oomph, and I saw the Version Management Tool version is not matching with Oomph Setup Core , but only for a small "delta"
    I tried to do an Update of the IDE using the Help > Check for updates, but I realized it is not a Complete IDE update , as suggested in the bug 473599.
    So, I have two questions:
    how to perform a Complete IDE Update ?
    how can I make a consistent installation, by assembling the five plugins above, including the Oomph version management ?
    Thank you very much for the time you're spending on my question.
    I hope my question does not seem impolite or excessively complex.
    Regards.

    Hi Patrik,
    The p2f file that you mentioned in https://bugs.eclipse.org/bugs/show_bug.cgi?id=473599 seems totally useless to me. It
    locks in specific versions of the listed IUs, no matter whether the identified repositories will provide those versions
    in the future or not. For example:
    <iu id='org.eclipse.oomph.setup.feature.group' name='Oomph Setup' version='1.2.0.v20150720-0925'>
    <repositories size='2'>
    <repository location='http://download.eclipse.org/oomph/updates'/>
    <repository location='http://download.eclipse.org/oomph/updates/latest'/>
    </repositories>
    </iu>
    A P2Director task in an Oomph setup model for GEF seems like a better alternative.
    More comments below...
    Cheers
    /Eike
    http://www.esc-net.de
    http://thegordian.blogspot.com
    http://twitter.com/eikestepper
    Am 27.07.2015 um 22:44 schrieb Patrik Suzzi:
    > Hallo,
    >
    > I am trying to build a complex eclipse installation needed for development of the Eclipse GEF project.
    >
    >
    >
    > As specified in the GEF contributor guide, the GEF-IDE consists of
    >
    > Eclipse IDE for committers Mars R as base eclipse ( in my case is win32)
    > API Tools Execution Environment Description v 1.0.1 from http://download.eclipse.org/releases/mars update site
    > e(fx)clipse IDE - PDE version .2.0.0, from http://download.eclipse.org/efxclipse/updates-released/2.0.0/site/ update site
    > m2e - Maven Integration for Eclipse - version 1.6.0, from http://download.eclipse.org/releases/mars update site
    > Xtext Complete SDK - version 2.8.3, from http://download.eclipse.org/releases/mars update site
    > Oomph Version Management Tool, from http://download.eclipse.org/oomph/updates
    >
    >
    > During the installation everything is Ok, until I install the last plugin: the Oomph Version Management Tool.
    >
    > After installing the Oomph Version Management Tool plug-in, at the next Eclipse Startup I see the following error:
    >
    > An internal error occurred during: "Setup check".
    > USER_HOME
    >
    >
    >
    > I was actually thinking my install was ok, but in bugzilla, I got that I did an "inconsistent installation" - see https://bugs.eclipse.org/bugs/show_bug.cgi?id=473599.
    >
    > Indeed, I checked in the About eclipse features for the Oomph, and I saw the Version Management Tool version is not matching with Oomph Setup Core .
    >
    >
    >
    > I tried to do an Update of the IDE using the Help > Check for updates, but I realized it is not a Complete IDE update , as suggested in the https://bugs.eclipse.org/bugs/show_bug.cgi?id=473599.
    >
    > So, I have two questions:
    >
    >
    > how to perform a Complete IDE Update ?
    I'm not 100% sure but I think you can't easily get out of this inconsistent state because the plugins that would do that
    for you are also impacted. I would recommend that you create a new installation with Oomph's Eclipse Installer.
    > how can I make a consistent installation, by assembling the five plugins above, including the Oomph version management ?
    I would suggest that you put pressure on the GEF people to provide a GEF project setup model, so that you can just add
    it to your install.

  • Annoying problem when downloading packages

    The problem started some time ago. When downloading packages, pacman only downloads a few packages at a time and errors out on the remaining ones with the "Service not available, closing control connection" message. If I try again, it will download the next few packages and error out again. I can repeat this until all packages are downloaded and then install them successfully, but this is certainly annoying. The number of downloaded packages is not always constant, but about the same each time and it seems to differ from mirror to mirror (kernel.org ~8, tu-chemnitz.de ~3).
    Unfortunately I cannot say exactly when it started happening, but I guess a few months ago. At first I thought it could be the mirror acting weird, but I don't think this is the case now. Before that, I had no problems at all.
    My network works just fine in all other cases, so I doubt the problem is there.

    that error is because of:  http://bugs.archlinux.org/task/20371
    just use http over ftp and it would be fine

  • Problem when building an executable with labview 6.1

    I use LabView 6.1 and I want to build up an executable. I use the labview application builder to do this. I have already built up executables and I had no problems but this time I just obtain a labview vi library which is called "internal.llb" each time I try to compile my vi's. Do you have an idea to solve my problem please ?

    Make sure that you have "Single target file containing all VIs" selected
    under Build Option in the Target Tab of the App builder. Sounds like you
    have "Small target file with external file for subVIs" selected with the
    target being a llb.
    -Tom
    "gege" wrote in message
    news:[email protected]..
    > I use LabView 6.1 and I want to build up an executable. I use the
    > labview application builder to do this. I have already built up
    > executables and I had no problems but this time I just obtain a
    > labview vi library which is called "internal.llb" each time I try to
    > compile my vi's. Do you have an idea to solve my problem please ?

  • Annoying problem when searching contacts

    Ive got an N81 and this is the first time ive had a nokia in years. My previous phones never had this problem.
    When searching the phonebook, lets say i press 'M' not only do the contact that start with 'M' come up but also for example a contact by the name of 'Dave M' or 'John Mob' as the second word begins with 'M'. Is there a way just for the first word that starts with 'M' to come up eg. 'Mary' and not for contacts that contain 'M' in the second or thrid word. Hope I make sense.
    Can you please implement this in the next firmware for the N81?
    Thanks

    that error is because of:  http://bugs.archlinux.org/task/20371
    just use http over ftp and it would be fine

  • A problem when building a BAPI. Thanks a lot.

    When I build a BAPI, can I use an exsiting data element to define an import parameter? Or I MUST define the data element for every parameter?
    Thanks a lot.

    When I build a BAPI, can I use an exsiting data element to define an import parameter? Or I MUST define my own data element for every parameter?
    Thanks a lot.

  • Problems when building amarok2-svn

    Hello,
    I get build errors when compiling against MySQL libraries:
    [ 82%] Building CXX object src/context/applets/mediadevices/CMakeFiles/amarok_context_applet_mediadevices.dir/amarok_context_applet_mediadevices_automoc.o
    /usr/bin/ld: /usr/lib/mysql/libmysqld.a(client.o): relocation R_X86_64_32 against `mysql_server_last_error' can not be used when making a shared object; recompile with -fPIC
    /usr/lib/mysql/libmysqld.a: could not read symbols: Bad value
    collect2: ld returned 1 exit status
    make[2]: *** [lib/libamarok_collection-sqlcollection.so] Error 1
    make[1]: *** [src/collection/sqlcollection/CMakeFiles/amarok_collection-sqlcollection.dir/all] Error 2
    make[1]: *** Waiting for unfinished jobs....
    I've installed mysqle in /opt/mysqle dir, then I've changed the PKGBUILD directories to /opt/mysqle/include/mysql and /opt/mysqle/lib/mysql but still cmake compiles against /usr/lib/mysql/libmysqld.a and so on... Does anyone know how to fix this?
    Regards,
    Przemek

    Maybe something here is helpful:
    http://www.archlinux.org/pipermail/arch … 10810.html

  • Strange problem when opening new message.

    I have a rather annoying problem when I open a newly received SMS from a particular contact (lets call him Bill).
    When I open the new message from Bill, either by swiping to unlock or touching a banner message at the top of the screen. Instead to being shown the message itself, I will automatically be taken to the 'start new message' screen with none of our message history (i.e. as if I am starting to type an entirely new message to Bill)
    I can then cancel this and return to myself and Bill's normal message stream.
    Any ideas how to get around this annoyance? Thank you.

    I think you have 2 ways to go here. Figure out what html is from wherever weblogic gets it, meaning you have to delve into the docs, snoop
    around in directories and find what it must be sending (This is going to be unavoidable if you are going to change what weblogic is doing.
    Sooner or later you have to try to figure out where it gets this stuff from)
    or
    you can experimentally snoop on your url with a tool like wget or curl. These are fundamental web tools.
    The latter is always a useful thing to be able to do. (you need to formulate a query to get the content-type).
    Whoever managed to get weblogic to serve any files in the first place probably can figure this out.

  • Error 1073 (on Clear Errors.vi) When Building Applicatio​n in LV 8.2

    I have seen numerous posts about this problem when building an application without a block diagram in LV 7.x, however, I am recieving this error on LV 8.2.  Whats most disturbing about it, is that it always hangs when processing Clear Errors.vi.  I have tried my source on two different machines, to no avail.  Also I tried to do a mass recompile of the entire vi.lib again no help.  It is very important that this program compiles, however I cannot get past this error.  Any suggestions?
    My specific error message is here:
    Visit the Request Support page at ni.com/ask to learn more about resolving this problem. Use the following information as a reference:
    Error 1073 occurred at ABAPI Dist disconnect td-poly.vi -> ABAPI Dist Chg and Save VIs.vi -> ABAPI Dist Build LLB Image.vi -> ABAPI Copy Files and Apply Settings.vi -> EBEP_Invoke_Build_Engine.vi -> EBUIP_Build_Invoke.vi -> EBUIP_Build_Invoke.vi.ProxyCaller
    Possible reason(s):
    LabVIEW:  This property is writable only when the VI is in edit mode, or this method is available only when the VI is in edit mode.
    -Paul

    Hello Paul,
    I am sorry for not elaborating previously.  This issue has been documented previously for further investigation to our R&D group (# 3ZK9LGP2).  In the report I found that this error, though vague in the description, is fixed by enabling MathScript Support. 
    To enable MathScript support, check the checkbox in the application properties for the 'Enable MathScript support' option.
    -Bob
    -Bob

  • I am unable to view google ads running alongside and under videos on YouTube. This is only a problem when I use Firefox. If I use another browser, I can see the ads. I do not have adlock as it does not appear in my plug-ins/add ons. Please help..

    I have been using Firefox for about two years. For about a month now I have been unable to view any Google advertisements that run on YouTube pages alongside and under videos. This is important for my business. I would like to stay with Firefox, but this is only a problem when I use Firefox and is not a problem with Internet Explorer or Google Chrome as I checked. I tried uninstalling Firefox and all plugs ins and add ons and then reinstalling it. This did not work. Firefox seems to be blocking the Google codes that enable the ads to run on the pages. I look forward to your help. Thank you.

    CS2 is very old and reached its "end of life" a while back.  So probably won't run on modern operating systems.  If you can still run it, you'll need to uninstall what you have and re-install with the download link below to activate it.
    Error: Activation Server Unavailable | CS2, Acrobat 7, Audition 3
    Nancy O.

  • How can I build and Debug Tomcat 5.5 under Eclipse?

    http://jakarta.apache.org/tomcat/tomcat-5.5-doc/building.html
    I am doing some rearch on Tomcat and want to build and debug Tomcat5.5 under Eclipse. Originally tomcat is built with ANT, it downloads all components from different CVS and build them together.
    I'd like to import Tomcat Source code (only the core components, such as catalina and Coyota, Jasper) and build them with Eclipse Bilder, so I can debug it as a normal JAVA program under DEGUB-View.
    Who has such experience and help me? I havd built Jetty under Eclipse, but Tomcat is much more complex.

    Help

Maybe you are looking for