Another Hard Drive Question.

Hey guys my uncle just gave me a powerbook g4 15 inch. I do not know what it has if it is aluminum or titanium but it is a 1.5ghz with a 80gb hard drive which is fried i believe. the laptop does not even start up. like i press the button and it is just a white screen forever. i hear alot of noise comming from the computer too which i think is the hard drive. so my question is I am probably gonna have to change the hard drive and i was wondering if this hard drive would work http://microcenter.com/singleproduct_results.phtml?productid=0258510 i mean it is a PATA so it should work. and then when i put a new hard drive i would have to format it and stuff? any help would be appreciated. thanks in advance

It would be a huge advantage to have the original discs. Have your uncle ask his coworker about them. If the coworker still has them, he or she will no doubt be happy to pass them on.
If you have the Applecare disc, it should contain Tech Tool Deluxe. See if you can boot to it by putting it in the optical drive and holding down "C" as you boot up. Tech Tool Deluxe is a somewhat primitive hardware test, but if it runs, you can get an idea of whether the PB functions otherwise. If the only problem is a dead hard drive, then it should be able to boot from a disc.
At some point, you will need an OS to install. You can order a set of original discs from Apple for around $60, or you could consider a retail copy of Leopard if the PB meets the technical specs.
Apple also has a flat rate repair program where they will fix whatever is wrong for a flat rate. I'm not sure if this PB would qualify, but if the problems are more extensive than just a dead hard drive it might be something to look into.
Try booting from the disc you have, and see if you can.
Good luck!

Similar Messages

  • Yet Another Hard Drive Question from a Mac Newbie

    I apologize in advance for the length of this post -- as I state in the subject line, I am a complete Mac newbie.
    I just took delivery yesterday on a new (early 2008) Mac Pro. I purchased and installed an additional 8GB RAM, and ordered it with a 500GB HD (Seagate, it looks like) and purchased two 750GB Hitachi HDs for bays 2 and 3. I will be doing a fair amount of photo editing, and also plan to partition the OS drive to run XP using bootcamp, but also plan to use VM Fusion.
    I am thinking of partitioning the boot drive with 250GB for OS X and apps, 150 GB for XP and apps, and ~66 remaining possibly to be used as scratch memory for CS3, though it sounds like this may not be enough. The bay 2 Hitachi would be used for all my user data (photos, music, docs, etc.) bay 3 would be for backup initially, possibly using Time Machine? (other recommendations welcomed). As space becomes an issue in the future, I will invest in a fourth internal HD, and at least 2TB external HDs for backup.
    Does this seem like a reasonable plan? If so, how do I go about formatting the drives and installing boot camp, Fusion, etc., and in what order? Also, how best do I organize my existing files from my current Windows machine as I copy them to the new user data HD, so they can be accessed as needed by both OS X and XP?
    Thanks for your help.

    I like the boot volume to never get beyond 50% used. Enough room for burning dual-layer DVDs can be 50GB for best results. And to force the system to use the first outer tracks.
    I hope you are concurrently zeroing both drives. SoftRAID is my choice for driver for RAIDs and you can cancel safely at any time. There are also excellent tools for checking sectors and mapping out bad blocks.
    I put Vista on its own 10K Raptor. I had it on the boot drive but I am always changing my mind, my drives and setup. Vista needs at least 40GB and that is with all my major documents and files on another drive which holds 150GB out of 450GB.
    You set the preference for what drive to use as scratch in CS3 or other programs. And you want to disable Spotlight indexing on any scratch or editing partition. Scratch can be a drive, a volume, a stripped array. Any 'normal' partition though don't use the default (journaling) feature is all.
    How large? I'd have to see and know how large files, work flow, and how long you work between projects. The nice thing, erase the scratch volume between projects but it is possible to use 300GB when you work on 1.5GB files and above.
    One early Mac Pro owner wasn't able to work as they wanted until they had 10-12GB RAM, boot RAID0, and RAIDs for scratch and data (saving 2GB files and not having to wait forever, which even a minute can feel like forever).
    Disk Utility: Partition. You can even partition 2+ drives, just make them the same, and first create 2 partitions (100GB on each?) and then stripe the first "Untitled 1" of each into 100GB x n array. Stripe or mirror the "Untitled 2" or leave those are two unique non-RAID volumes. Sounds harder than it is.
    Scratch = temp space and designed to not be saved, to be erased as needed.
    SoftRAID.com 3.6.6 makes it easy to create, delete, erase volumes and arrays as needed. Leopard has improved on non-RAID but not with RAIDs (for those that change their minds).

  • TS4498 Can i move my installation of Logic 10 to another hard drive, as its nearly full and i want to free up space so i can install the additional audio files too.

    Hi All,
           ....i've recently bought and downloaded Logic Pro X.........the software is great.......i love it. But when i bought it from apple, it gave me no choice where to install it. It just went ahead and installed it in the drive which has my operating system in it. Which, in itself is not a problem........but, in my case, the hard drive in question is almost full...........so when i decided to add the additional audio files which come with Logic...........a message was displayed that not enough free space is available for additional audio files.......please remove files to free up space!  
            I would love to free up space, but i only have a small 64gb SSD (which is where my operating system is installed). Normally, by moving files around (to another hard drive for example) would be the answer to this problem, but.........and here's the problem..........Logic, and my operating system cannot be moved to another hard drive, once installed it seems logic is there for good.
            Come on Apple!!!!!!!!!!.................i have a terrabyte of space on my other hard drive!! ready and waiting for some music files and or Logic!!!!  .........why on earth could you not of given me the option of an installation disk choice!!!!!
          .......well, it seems i'm stuffed now, and £130 lighter in the pocket. I could be the next Mody or Fat Boy Slim............but alas............it's not even looking like i'm gonna even be a one hit wonder.
         ........if anyone knows how to move logic to another destination drive, please help and when i'm famous, i'll sing at your wedding :-)

    The vast majority of applications must be install on the system drive in order to run correctly.
    Generally the applications take up very little disk space. It is usually the files they produce that need the space. Seeing as how I don't use Logic I can't do this but you might want to check how to move the files generated by Logic to another drive.
    Allan

  • How do I move all files from one project, to another hard drive?

    I am using CS3- I created a project on one hard drive, began editing, etc.- but now I'd like to move that project to another hard drive.
    Where are all of the files associated with it so I can move it successfully?
    Thanks!

    You will also find links to many
    free tutorials in the PremiereProPedia that will quickly show you how things are done in Premiere Pro.
    Cheers
    Eddie
    PremiereProPedia   (
    RSS feed)
    - Over 300 frequently answered questions
    - Over 250 free tutorials
    - Maintained by editors like
    you
    Forum FAQ

  • How can I back up a hard drive with another hard drive?

    I don't even know what community to post this question.
    I have a standard usb 3.0, 4TB hard drive that I store EVERYTHING on (pictures, music, movies, documents). I spent this past summer organizing all of my files from multiple old hard drives and compiling them onto this one. It's very nice and organized now however, after all of this work I don't want to lose my stuff if the hd fails or something happens. So I bought another exact hd to back it up.
    Before I do so, I was contemplating if there is any software or a better way than me doing this manually. I can easily copy the contents over and it will be backed up, but what happens if I make a change to my main hard drive i.e. add something or delete something. I would have to keep record of every change I make and do that exact same thing on the backup hard drive.
    I'm guessing there's probably a simpler option that I'm just not aware of so that's why I'm coming here. Is there any way to select a hard drive and designate it as a backup for another hard drive so it will do all of that process automatically? I know my iMac has time machine, but I don't really know how that works and that seems to want to backup my desktop computer, which I'm not really interested in doing since I don't really store much on it other than my main programs. I also don't know where it backs things up to. Does it just double up on your current hard drive or have cloud storage or what?
    Thanks for any advice.

    Time Machine will back up the internal drive by default and can be set to back up external ones formatted as Mac OS Extended (Journaled). It can put the data onto a drive formatted as Mac OS Extended (Journaled) or a network storage location, but not Apple's iCloud servers.
    (114109)

  • Another external drive question

    As I mentioned in an earlier post, I've partitioned my WD 500 GB firewire 800 external drive into three partitions. My intention was to obtain a bootable backup in the first partition (100 GB) and have the other two as supplemental strorage for future use (200 GB and the remaining approx. 165 GB). After performing an immediate backup of the Macintosh HD into the first partition, I read that a "duplicate", not "backup" was required for boot purposes.
    I'd really appreciate some suggestions here from those with more experience in these matters. My internal 500 GB HD has approximately 28 GB of used capacity currently (this will grow, of course, over time). Should I have created a partition for a bootable start up and "duplicated" the internal HD? Then, should I use a second partition for normal backups? What size should these partitions be configured to allow for maximum future storage, without pushing the limits on the backup/startup partitions? And finally, what are the steps to re-configure the external to achieve my desired intentions?
    This is a lot of question, but I certainly appreciate the guidance provided me thus far in my early days of Mac enjoyment. Thanks.
    iMac 24 2.33/3G Ram/500G HD/7600GT/BT K/M /WD 500GB FWHD   Mac OS X (10.4.9)  

    Hello! Sounds like you have thought it out well. All you need now is to clone your main drive so it will be bootable. You can do that using CarbonCopyCloner, SuperDuper, or you can use the Apple Disk Utility you already have. A lot of people use SuperDuper and others swear by some of the others. Below are listed Kappy's steps to do it using the disk utility. I use several bootable backups just for peace of mind. I generally clone to one and then the other so if something happens during the cloning (such as a power outage) I'll still have a drive that works. I usually make a clone about once a month and then backup any important documents every day to a flash drive, cd/dvd, or another hard drive volume. Once you make a clone you should always boot from it to make sure it's booting ok. Sometimes a clone will fail to boot. I also HIGHLY recommend obtaining and using DISKWARRIOR. Diskwarrior is the "gold standard" for disk drive directory maintenance which is the leading cause of hard drive problems. Using DW about once a month or after any force shutdown, forced re-start, or power outage will head off most disk problems. Tom
    Kappy's Steps to Produce a bootable clone
    Prep external FW drive:
    1. Open Disk Utility from the Utilities folder.
    2. Select the backup or destination volume from the left side list.
    3. Click on the Erase tab in the DU main window. Set the format type to Mac OS Extended (journaled, if available) and click on the Erase button. This step can be skipped if the destination has already been freshly erased.
    4. Click on the Restore tab in the DU main window.
    5. Select the backup or destination volume from the left side list and drag it to the Destination entry field.
    6. Select the startup or source volume from the left side list and drag it to the Source entry field.
    7. Double-check you got it right, then click on the Restore button.
    8. Select the destination drive on the Desktop and press COMMAND-I to open the Get Info window. At the bottom in the Ownership and Permissions section be sure the box labeled "Ignore Permissions on this Volume" is unchecked. Verify the settings for Ownership and Permissions as follows: Owner=system with read/write; Group=admin with read/write; Other with read-only. If they are not correct then reset them.
    For added precaution you can boot into safe mode before doing the clone.

  • How do I save and import my bookmarks from another hard drive? When I try to open the installed Firefox on the old drive, it (obviously) opens a browser from the new main drive, free of bookmarks. Is there a way I can save the bookmarks on the old drive w

    How do I save and import my bookmarks from another hard drive? When I try to open the installed Firefox on the old drive, it (obviously) opens a browser from the new main drive, free of bookmarks. Is there a way I can save the bookmarks on the old drive without opening a browser?
    The guts of my computer were rearranged and I got a new main hard drive. My old one is still in there and I can get stuff from it, but when I go to the Mozilla folder on the old one, I can't figure out if there's anything I can do to get all my bookmarks from that drive to my new one, where Firefox is newly installed.

    If you open Firefox then Firefox will always use the default profile folder as found via profiles.ini on your system drive.
    You either need to import the file in your current default profile or copy the file to your current profile folder while Firefox is closed.
    Firefox 3 stores the bookmarks and the browser history in [http://kb.mozillazine.org/places.sqlite places.sqlite] and no longer creates an HTML backup by default.
    There are also (five) JSON backups in the bookmarkbackups folder within the Firefox profile folder.
    You can either copy the file places.sqlite to your [http://kb.mozillazine.org/Profile_folder_-_Firefox Firefox Profile Folder] or import the most recent JSON backup from the bookmarkbackups folder of that old profile.
    See:
    http://kb.mozillazine.org/Backing_up_and_restoring_bookmarks_-_Firefox
    http://kb.mozillazine.org/Transferring_data_to_a_new_profile_-_Firefox
    See http://kb.mozillazine.org/Profile_folder_-_Firefox
    "Application Data" in XP/Win2K and "AppData" in Vista/Windows 7 are hidden folders.
    See http://kb.mozillazine.org/Show_hidden_files_and_folders
    Go to: Control Panel > Folder Options > "View" tab > under "Hidden files and folders", select "Show hidden files and folders".
    You may want to un-check the box "Hide extensions for known file types" to see the file extensions of all files.

  • How do I generate a duplicate copy of my photos on another hard drive without loosing the keywords?

    I want to back up my photos on another hard drive and access them from my main catalog? How do I do that? If I use Lightroom to move the folder onto another hard drive it does not give me the option to copy them. I have to actually move them, which defeats the purpose because I still have only one copy.
    All of my images are in DNG format.

    Heppenheim wrote:
    I want to back up my photos on another hard drive and access them from my main catalog?
    Backup copies should never be accessed by LR or any other editing application. They are "safety net" copies to be used only when the original image files become lost, damaged, or corrupted.
    As dj_paige explained you also need to include regular backup copies of your LR catalog(s) on the backup hard drive. Any file & folder backup application will do this for you by keeping the files and folders on your backup drive up-to-date (i.e. synchronized) with the primary drive. If on a Mac you can use Time Machine if on a Windows system there are numerous applications available, both paid and freeware. I use FreeFileSync for backing up all my media files, including Pictures, Music, Videos, Documents, Settings, and of course LR catalog.
    If you're intention was to use the backup copies as separate editing copies, please take a look at Virtual Copies.

  • Multiple hard drives question

    Hi:
    I have multiple hard drives on my Mac Pro and I also have an iMac.  I currently have Photoshop CS5 loaded on both Macs using the Snow Leopard operating system.  Does anyone know if I try to load Photoshop CS5 on another hard drive on my Mac Pro swith Lion as the operating system, will that be considered like another "computer" and go beyond the two computers normally allowed?
    Herman R

    Does anyone know if I try to load Photoshop CS5 on another hard drive on my Mac Pro swith Lion as the operating system, will that be considered like another "computer" and go beyond the two computers normally allowed?
    To my knowledge the restriction for PS activation is per computer and not per drive or operating system. At least I was able to have an old and a new system on separate HD in my MacPro  with both CS5 able to run while also installed a version on my MacBook. All using Snow Leopard but I have no reason to believe this has changed for Lion.
    But you are always able to install PS on more then two computers, the only downside is that you first have to deactivate one of them and activate the version on another computer. And activating and deactivating is not much work, just select it in the  Help menu

  • What is the best format to use on an external hard drive so I can both back up my Macbook Pro and also put movies on it from another hard drive (PC)?

    I am looking for a solution to whether if it is best to get two hard drives or one that can do two things that I want.
    I am looking for a hard drive format that can both back up my 500GB Macbook Pro but I was also wondering if I could also put movies on it from another hard drive that is PC based. Would partitioning the hard drive work for this? I don't know what are the best formats to use.
    If this is too hard it might just be easier having a separate 500GB hard drive for back up of my Mac and another bigger hard drive for the movies etc (the files are probably bigger than 4GB). Any help would be greatly appreciated as I need to make a decision soon!

    Csound1 wrote:
    Microsoft has not released the official exFAT file system specification, and a restrictive license from Microsoft is required in order to make and distribute exFAT implementations. Microsoft also asserts patents on exFAT which make it impossible to re-implement its functionality in a compatible way without violating a large percentage of them.[13] This renders the implementation, distribution, and use of exFAT as a part of free or open-source operating systems or of commercial software, for which the vendors could not obtain a license from Microsoft, not only technically difficult, but legally impossible in countries that recognize United States software patents.
    Can't help with that, if one is using a Windows machine then they are subjected to their rules and control.
    Limited support outside Windows and Mac OS X operating systems as of 2012, when most consumer electronic devices could only handleFAT12/FAT16/FAT32, rendering exFAT (and flash memory formats using it) impractical as a universal exchange format.
    The OP said they plan to store movies on the external drive.
    Many movies today are well over 4GB in size, thus exFAT has to be used and formatted on the PC, which the Mac can then read.
    Older Windows NT versions up to Windows Vista without Service Pack 1 do not support exFAT.
    Irrelevant, Microsoft provides a free download of exFAT for Windows XP, and Vista shouldn't be running on pre SP1 anyway.
    Some distributions of Linux have begun to include support for exFAT. It is however, only available as a file system in user space, as it's not supported by the kernel.
    Irrelevant, OP is using Windows and OS X, not Linux and if they did Linux can read the files at least and transfer, which is all they care about really.
    Windows Vista is unable to use exFAT drives for ReadyBoost. Windows 7 removes this limitation, enabling ReadyBoost caches larger than 4 GiB.[14]
    Irrelevant, the OP's is intending to use it as transfer drive between Mac's and Windows for movies.
    The standard exFAT implementation only uses a single file allocation table and free space map. FAT file systems instead used alternating tables, as this allowed recovery of the file system if the media was ejected during a write (which occurs frequently in practice with removable media). The optional TexFAT component adds support for additional backup tables and maps, but may not be supported.
    Some relevancy, but only exFAT can handle 4GB+ files between Mac's and PC's, so the need outweighs the possible problem.
    The OP needs to follow the standard Windows practice of "safely removing hardware" before physically disconnecting the external drive. If a write is occurring, it won't allow disconnecting until the write is finished.
    Support for up to 2,796,202 files per subdirectory only.[1][nb 3] Microsoft documents a limit of 65,534 files per sub-directory for their FAT32 implementation, but other operating systems have no special limit for the number of files in a FAT32 directory. FAT32 implementations in other operating systems allow an unlimited number of files up to the number of available clusters (that is, up to 268,304,373 files on volumes without long filenames).[nb 4]
    Not a issue, only in extreme cases of a lot of small files. The OP plans to use it for movies which are usually large and take up a lot of space on the drive.
    IMMO It looks like you just ran off and copied something to argue your point when all the points are basically irrelevant.
    There is only one format that can easily share 4GB sized files between Mac's and PC's without further complications.
    It's ALSO possible to install MacDrive on the PC and format the drive on the Mac HFS+, but I didn't recommend that because I know it's a hassle just like third party NTFS writing software is a hassle on Mac's.
    If you so anti-Microsoft format, then you must know Paragon has to pay a license fee to Microsoft for using the NTFS format.
    At least with exFAT there is no fee to Redmond, at least not yet.

  • In itunes, can i save my music on another hard drive other than C?

    i have the program installed on my computer, i would like the music to be saved on another hard drive other than C, is there a way to do that within itunes?

    You can have multiple libraries, and switch between them using the shift-start-iTunes method. Normally a single library is all that is required. Each library connects to a single designated media folder, however you can import content from other locations if you choose. See Make a split library portable for reasons why this may not be the best approach. If you want to access the "same" library on more than one machine then you need to clone the library files as well as media.
    tt2

  • My Seagate external Hard drive is saying that it is damaged I have another hard drive to transfer everything to but how do I fix this one?

    My Seagate external Hard drive is saying that it is damaged I have another hard drive to transfer everything to but how do I fix this one?

    You may not be able to fix it.
    Some data recovery tools are non-destructive in their data recovery methods:
    https://discussions.apple.com/docs/DOC-1689

  • I have a power mac g4 with mac os 10.4. 11 , I want to change the hard-drive ,what program  can I used  to transfer one hard-drive  to another  hard- drive  on this mac pc.

    I have a power mac g4 with mac os 10.4. 11 , I want to change the hard-drive
    ,what program  can I used  to transfer one hard-drive  data to another  hard- drive  on this mac pc.

    The Disk Utility, Carbon Copy Cloner, SuperDuper, or similar software. For best results, place the second drive inside the computer or in a FireWire enclosure and boot the computer from it before removing the internal drive.
    (66989)

  • Moving iTunes library to another hard drive

    I followed the directions on the Apple website
    http://docs.info.apple.com/article.html?artnum=301748
    to move my iTunes library to another hard drive. the instructions say to delete the original iTunes folder ...
    now the library has been moved (the files are in the folder on the new hard drive) but iTunes has completely lost its catalog of my music (the screen is empty when I select library in iTunes) - what happened and how can I get the catalog back without importing everything?

    You missed 'Point 14':
    After the folder has been copied, locate your original iTunes Music folder, and drag it to the Trash or Recycle Bin. Note: Don't remove the iTunes 4 Music Library files that may be in the same location as the iTunes Music folder.
    If you deleted the 'iTunes Library.itl' file from that folder, then you deleted the iTunes database file that keeps track of all your song references, Playlists and some attributes. See:What are the iTunes Library files?
    Can you recover this file from the ExHD? Or maybe the Recycle Bin? Place it back into the 'iTunes' folder under the 'My Music' folder.
    If not, you'll have to 'Rebuild' your Library from the ExHD's music files. It's a simple 'File=>Add Folder' from within iTunes, but you will lose your Playlists, Ratings, Play Counts and Last Played attributes.

  • How can I save a session to another hard drive or flash drive?

    I want to rebuild my hard drive but I want to save the Firefox session (like 70 tabs) before I do so I can reload them after the rebuild. Can I save a session to another hard drive or flash drive?

    The data of the current session is stored in the sessionstore.js file in the profile folder.
    See also:
    *https://support.mozilla.org/kb/Recovering+important+data+from+an+old+profile
    *http://kb.mozillazine.org/Transferring_data_to_a_new_profile_-_Firefox
    You can use this button to go to the Firefox profile folder:
    *Help > Troubleshooting Information > Profile Directory: Show Folder (Linux: Open Directory; Mac: Show in Finder)

Maybe you are looking for