Another migration question

I am moving from a G5 running Leopard to a new Mac Pro (Early 2008). I plan to migrate my user data using MA, but reinstall all applications manually and drag the library>application support files over manually.
My question is this: should I install the apps first, then drag the application support files over... or the other way around?

Thanks for your reply, Neil. I'm not sure I understand your answer, though. I am using the original installers. But I want to carry over all of my preferences, settings, etc. from my previous application installs on my G5. As far as I know, those are stored in the "user>library>application support" folder and the "user>library>preferences" folder.
If I install the apps first, then drag the relevant files over from my G5, I'm concerned that they'll be replacing files installed by the original installers particular to the Intel-based Mac Pro. OTOH, if I drag the files over from my G5 first, and then run the installers, won't they overwrite my preferences & settings?

Similar Messages

Iprint migration question

We had to back out of a migration last week because of issues with edir version on Netware. I've updated that and TSA, but another question just came up. I'm migrating iPrint from a cluster, plus doing transfer ID. If I choose cluster resource on the source server in miggui, I only get the consolidate option. Does that mean I need to first run a consolidation job just for iprint and then go back and run the transfer ID? Or will the consolidation screw up a transfer ID?

$(UService migrations based on cluster resources and Transfer ID are separated in Migration Tools (miggui). You need to execute Cluster based iPrint migration in one project and Transfer ID migration in another project.
Perform all service consolidation migrations and make sure they are all completed/synced and working before attempting Transfer ID.
>>>
From:
zenking<[email protected]>
To:
novell.support.open-enterprise-server.migration
Date:
07/22/2010 02:26 AM
Subject:
iprint migration question
We had to back out of a migration last week because of issues with edir
version on Netware. I've updated that and TSA, but another question just
came up. I'm migrating iPrint from a cluster, plus doing transfer ID.
If I choose cluster resource on the source server in miggui, I only get
the consolidate option. Does that mean I need to first run a
consolidation job just for iprint and then go back and run the transfer
ID? Or will the consolidation screw up a transfer ID?
zenking
zenking's Profile: http://forums.novell.com/member.php?userid=2813
View this thread: http://forums.novell.com/showthread.php?t=416302

Analysis Authorization Migration Question

Analysis Authorization Migration Question
This is detail Question
1) I am testing Analysis Authorization Migration in NW2004s SP9 and have applied all OSS notes that are relevant to SP09 and are coming in SP10.
2) We have 2 Info object flagged as Authorization relevant 0COMP_CODE and 0COSTCENTER
3) We have Object level security set-up in BW 3.x system and for a role we have specified values like 0COMP_CODE has value 1000, 1800. :. In the same role we have specified 0COSTCENTER value 130001 to 180001, : and hierarchy node.
4) When we migrate to Analysis Authorizations, using RSEC_MIGRATION, this program creates 2 Authorizations ZCOCODE00 & ZCOSTCTRH00. Both of them have 0COMP_CODE and 0COST_CENTER Objects.
5) ZCOCODE00 authorization gets value 0COMP_CODE values 1000, 1800. : and 0COSTCENTER Value :.
6) On the same line ZCOSTCTRH00 gets value 130001 to 180001, : and 0COMP_CODE :.
1st Question:
1) Why does it create 2 Authorizations?
2) During Checking it does not pass the authorizations, because it seems to me that it fails in Optimization process.
3) I manually merge the authorizations in ONE object then authorization check passes. In other word if I combine ZCOSTCTRH00 & ZCOCODE00 then Query authorization check passes.
Any one is struggling on this.
Please note, I am doing Migration so that it updates existing Profiles (Roles now from SP9).
Any comments will be very help full.
Pankaj Gupta

Hello Pankaj
There are some basic misunderstandings on your side.
Let me try to clarify:
First we should distinguish between migration of authorizations and of what a query does with them.
You had 2 auth objects before migration (in 3.x).
Of course, they must be migrated to 2 new analysis auths.
There is no general possibility to combine authorizations to a single one as the may appear in different roles and users. Moreover this would kill performance and finally, nobody would recognize the origin.
Only in very restricted cases one could think of a combination of auths which come out of migration. But, then people loose overview about what goes on.
Before the corrections in note "Migration IV" the : had not been inserted but now it is for good reasons.
Now, accept for the moment that you receive 2 auths.
Then, you cannnot (must not) combine the 2 resulting authorizations!
Authorization 1
COMP_CODE : 1000, 1300, :
Cost Center : :
Authorizations 2
Comp_Code :
Cost Center : 3100001-31999999; : plus a Hierarchy Node.
This means that e.g. combination
COMP_CODE 1000
COST_CENTER 3100001-31999999
is not allowed!!! Therefore, they must not be combined!
Also, the query and its optimization is comepletely independent of the migration. And here, during query run time the auths cannot be combined. It is no failure!
Moreover, the merging optimization is just a performance optimizaiton and has nothing to do with whether the query result is authorized or not.
If you combine them manually you have authorized different combinations.
Well, now you may wonder why you get 2 auths at all which leads to a "no auth" result in the query execution.
The reason is, that in 3.x where you got a result with your 2 auth objects the modeling was wrong.
If you want to authorize any combination of characteristic values, you should combine these characteritics together in one auth object, not in 2!
(In BI7.0 it works like that but not in 3.x)
But you defined 2 which may be valid even in several other InfoProviders independently and not even at the same time. Moreover, the auth objects may come from different roles and may be assigend to different users which then have completely different auth content. In general it is not possible to combine different auth objects or to find out those special situations which nevertheless allow for such optimizations. If you re-do a migration with more objects and users you could even receive different results which is also not satisfying.
Therefore, instead, the mechanism was introduced to insert a : auth to those characteristics that are auth relevant (and checked now with 7.0) but not in the currently processed auth object.
In you special case it may have made sense to combine them but not in general. And a migration can only try to work as general as possible.
For your application you may combine the 2 auths manually if you want to allow also the crossover combinations
COMP_CODE 1000
COST_CENTER 3100001-31999999
Best regards
Peter John
BI Development

Another newb question: multiple virtual servers

Hi, I have yet another ignorant question. I have several unrelated web projects that I am working on, and I would like to be able to set up a virtual server for each one for testing purposes, such as: http://project1, http://project2, http://project3. Can someone tell me if this is doable, and if there are any tutorials/resources on this for someone who has 0 experience running a web serer? Sorry for being so ignorant!

Yes, it is doable.
You can setup virtual server either by IP or by name.
If you have one IP, and want to set them up by name (ex. http://project1, http://project2, http://project3) you can do so easily with this type of configuration:
<virtual-server>
 <name>mydomain</name>
 <http-listener-name>http-listener-1</http-listener-name>
 <host>*.mydomain.com</host>
 <document-root>/www/domain</document-root>
</virtual-server>
<virtual-server>
 <name>myotherdomain</name>
 <http-listener-name>http-listener-1</http-listener-name>
 <host>*.myotherdomain.com</host>
 <document-root>/www/myotherdomain</document-root>
</virtual-server>
....The important part here is that
a) all virtual servers share the same HTTP listener
b) which virtual server serves the request depends on the $HOST request header send by the client. Sun Web Server does the matching for you. It will match $HOST vs. the virtual server's host attribute. Depending on which site you connect to the right virtual server will be used.
c) if the $HOST request header does not match any of the virtual servers, then the default virtual server defined in the HTTP listener will be used.
To create a virtual server, use the Admin GUI, access the configuration, and then add new virtual server. Or use the following CLI command.
wadm> create-virtual-server --config=myconfig --http-listener-name=http-listener-1 --document-root=/www/docs/myserver.com --host-pattern=myserver.com --log-file=../logs/myserver.com-error_logs myserverHost pattern will be used for matching. Some of this elements might be optional.
Hope that helps. And keep the questions coming :D
Edit: Also check the documentation
Using Virtual Servers in SJS Web Server 7.0

Exchange 2013 Migration Questions

Exchange 2013 SP1 to a new server. I just realized that I have been asking migration questions on the "general" forum. Here's the deal:
We just want to move to a newer server and reuse the "old" server as a DAG member. We have a production exchange 2013 SP1 server and I found that the DB is not on a RAID'ed drive. So, we purchased a server. I installed 2012 R2 and all windows updates.
Then installed exchange 2013 SP1. Then got our AS/AV software installed. When I boot the new server up and login to ECP, it sees all the exchange users, DB and info. So, I followed:
http://technet.microsoft.com/en-us/library/dd876926(v=exchg.150).aspx
to migrate users and current email to the new DB. However, when users logged in their current email was not there. I also tried to use the ECP migration option and this resulted in the same, users old email was not in their inbox. So I had to perform that
same process on the old DB to get users old email back. I then tried to use the migration option in the ECP->same issue. So as of now, we are on the old DB and things are working fine.
According to:
http://technet.microsoft.com/en-us/library/aa997006(v=exchg.65).aspx
When moving from server to server, the DB filename must be the same. The non-production server does not have the same DB filename. Could this be the problem? Could someone point me to documentation on migrating from server to server

So I ran Get-Mailbox -Database “Source Database Name” " -ResultSize Unlimited | New-MoveRequest -TargetDatabase “Target Database Name” and moved all the user mailboxes. Then moved the system mailboxes, public folders and
OAB. Adjusted send connector to reflect new server. Log in as a user, all email is there. Great! Dismount the old DB. Wait a few minutes and user email is still there. Woohoo! Shut down the old exchange server and a few minutes later, all email is gone. Boo!
Boot the old server back up and mount the old DB, all email is back in user inbox. How do I use only the new DB in exchange 2013?
So I just dismounted the old DB and all email stays in users inbox?! So it must be something with the old server that did not get moved over but for the life of me I cant figure out what

Another simple questions

Hello friends:
Another simple question: I need to learn things about Oracle on my desktop.
My machine runs Windows 98. Oracle has some desktop product of its Database Line?
For example: Oracle Personal?
And Oracle Lite? What's the main difference between Oracle Personal and
Oracle Lite?
Thank You
Gracias
Ing. Pablo Romero
CORDOBA ARGENTINA

1. I didn't know the answer to your first question, but I googled it and it says the item is the in-call audio boost.
http://forums.crackberry.com/f71/flag-icon-47659/
2. isn't this setting determined by the carrier? So it's not a setting in the phone, but when you call in to your voicemail you can change your options?

Another migration assistant question

Greetings everyone,
last night I got my brand new iMac, i used migration assistant to transfer all my files from my old Powerbook G4 to the new Imac. Everything went smooth with the exception that when I open the finder at the left under "devices" my iMac has the same name my powerbook had (powerbook G4 12") is there anyway I can change the name of the device to something else?
Thank you for the help, Apple forums rock!
Rob

System Preferences/Sharing pane. Rename it right at the top.

How do I find a photo file in the Finder + future migration question

Being a recent Mac convert, I am just getting used to the 'complete control' approach to photo management that iPhoto has. I'm used to knowing where my photos physically reside on my computer - this is useful for doing things like uploading photos to a website for example. How do I actually find a particular photo in the Finder (or even give photo files recognisable names, as opposed to whatever automated naming system iPhoto uses)?
A followup question to this is, what happens if I ever want to migrate my photos out of iPhoto one day to another application or even back to a PC (God forbid - just my paranoia about being forced to use a particular system forever kicking in here!) - is there a way to do this, and keep photo modifications etc? Or once I start using iPhoto, have I made my decision for life??
My apologies if this has been asked before, I couldn't find anything in the forum when searching.

poddster
I hope you've a notebook and pen, but you've asked a lot of questions:
I'm used to knowing where my photos physically reside on my computer
You photos are stored in the iPhoto Library at your Pictures Folder. This is a Unix style Package Folder that very easy to see inside: right click on it and choose show package contents. A finder window opens with the library exposed.
Here's how the library is laid out:
In this folder there are various files, which are the Library itself and some ancillary files. Then you have three folders
Originals are the photos as they were downloaded from your camera or scanner.
(ii) Modified contains edited pics, shots that you have cropped, rotated or changed in any way.
iPhoto always preserves the original file, all operations are carried out on a copy.
(iii) Data holds the thumbnails the the app needs to show you the photos in the iPhoto Window.
And here's a warning: It is strongly advised that you do not move, change or in anyway alter things in the iPhoto Library Folder as this can cause the application to fail and even lead to data loss.
this is useful for doing things like uploading photos to a website for example
No it's not. Don't surf the iPhoto Library. The idea with iPhoto is that you do everything via the iPhoto Window or media browsers:
So, to access pics use one (or more) of the following:
There are three ways (at least) to get files from the iPhoto Window.
1. *Drag and Drop*: Drag a photo from the iPhoto Window to the desktop, there iPhoto will make a full-sized copy of the pic.
2. *File -> Export*: Select the files in the iPhoto Window and go File -> Export. The dialogue will give you various options, including altering the format, naming the files and changing the size. Again, producing a copy.
3. *Show File*: Right- (or Control-) Click on a pic and in the resulting dialogue choose 'Show File'. A Finder window will pop open with the file already selected.
To upload to MySpace or any site that does not have an iPhoto Export Plug-in the recommended way is to Select the Pic in the iPhoto Window and go File -> Export and export the pic to the desktop, then upload from there. After the upload you can trash the pic on the desktop. It's only a copy and your original is safe in iPhoto.
This is also true for emailing with Web-based services. If you're using Gmail you can use THIS
If you use Apple's Mail, Entourage, AOL or Eudora you can email from within iPhoto.
If you use a Cocoa-based Browser such as Safari, you can drag the pics from the iPhoto Window to the Attach window in the browser. Or, if you want to access the files with iPhoto not running, then create a Media Browser using Automator (takes about 10 seconds) or use THIS
iPhot doesn't name the files, those names are given by your camera. You can add titles in iPhoto and if you use the File -> Export command there's a facility there to name the resulting file (it'll be a copy - remember what I said about all operation being done on a copy...) with the title.
Do not rename files in iPhoto, That comes under the heading of making changes in the iPhoto Library Folder and alters the path to the files. If you do, iPhoto will lose track of the file. But the truth is there's simply no need to. However, you can rename the files before importing them if you like.
Migrating is really easy. You've seen the layout of the Library above. The originals are all there, in the originals folder, the Modified versions in their folder. If you want to have only the most recent versions of pics, then export them from iPhoto to a folder on the desktop.
By all means post back if you need more.
Regards
TD

Hyper-V Server 2012 Migration Questions

Hello All,
This is my first post here, but I have used these forums many times for information. Sorry in advance for the long post.
I have a few questions regarding migration to Hyper-V server 2012 for my production environment. I have done quite a bit of reading, but I have a few direct questions and I would like to get some direct answers.
My current production environment consists of one PowerEdge 2900 with 2 Xeon X5460 Quad Core 3.16GHz CPUs, 24 GB of RAM and a RAID 10 consisting of 8, 500 GB HDDs for a total of 2TB of storage. I am currently running Server 2008 R2 Enterprise w/ GUI as the
Hyper-V host OS. I have 4 virtual machines all also running Server 2008 R2 Enterprise. The 4 virtual machines consist of 1 domain controller, 1 Exchange Server with Exchange 2010 Standard, 1 Server running SharePoint 2010 Enterprise and the remaining server
running IIS with FTP and HTTP.
The network topology is as follows….
Hopefully it is clear from my diagram that the Hyper-V host OS is connected to the same physical network as the domain, but is not a joined to the domain. I set it up this way because I had concerns about connectivity and manageability because the domain
controller is a guest VM. Also, the IIS server is on a completely different physical network independent of the domain.
What I would like to accomplish is the migration of the above environment to Hyper-V Server 2012 as is. I want to keep my existing guest VMs unchanged and running Server 2008 R2 for now as well as keep the existing network topology intact.
I have 3 additional servers in a separate test environment that would be able to serve as temporary storage or whatever is needed for the migration process.
Here are the two main things I would like to accomplish with this migration…
1. Make the transition from Server 2008 R2 to Hyper-V Server 2012 as a host OS.
2. Migrate virtual hard disks from .VHD to the new .VHDX format.
All that being said, I have finally come to my questions regarding this process.
First and foremost, I would obviously need to back up my current setup in case something goes horribly wrong during the migration. My question regarding the initial backup is would it be better to do a bare metal backup of the Hyper-V host or should I do
individual backups (bare-metal?) of the Guest VMs from within their operating systems?
Second, since I plan to use Hyper-V Server 2012, I will have to manage the host OS using the RSAT from a domain joined client running Windows 7 Professional. How much of a pain is it going to be to setup RSAT and manage the non-domain joined host from a
domain joined client? Is there a better way without using SCVMM or using Server 2012 w/ a GUI as the host OS?
Third, are there any concerns I should have, precautions I should take or procedures I need to do before, during or after the migration regarding the existing VMs and the new virtualized hardware environment on the same physical host?
Forth, should I use the trial version of SCVMM 2012 SP1 (or another previous version) to perform the migration? What should I be aware of using SCVMM for the migration and then discontinuing its use after the migration is complete and moving to management
using the RSAT?
Fifth, if I don’t use SCVMM for the migration, what is the best procedure for moving the VMs? Should I just copy the VHDs to a temporary storage location, install Hyper-V server 2012, copy the VHDs back, create new VMs and attach the VHDs or should I use
the export/import process?
Number six, when is the best time to migrate the VHDs to VHDX format and what would be the best method?
And finally, do I need to worry about USN rollback with a single domain controller? From my reading, this seems to be a point of disagreement. Some people say it could happen while others say it won’t. Is there any point during the migration process where
it could occur either during the copying of VHDs or from the switch to VHDX?
Again, sorry for the long post and thanks for staying with me this far. Any information would be much appreciated

1) As Jens said below with Windows Server 2012 you can simple copy the configuration files and VHDs from a 2008 R2 server to a 2012 server and import them - they one caveat to this is that any vlan configuration is lost and you have to simply re-create it.
Optionally you can also export the virtual machines from Windows Server 2008 R2 and then import them on Windows Server 2012.
2) Remote management in a workgroup does have some caveat's associated with it - take a look at
http://blogs.technet.com/b/jhoward/archive/2009/08/07/hvremote-refresh.aspx. Generally I would recommend joining the Hyper-V management operating system to the domain - not just because of these issues but for a number of other features to work properly
(see below)
3) I always recommend validating the hardware and environment after the installation before migrating critical workloads to it - testing networking, backup etc... to make sure they function as expected. Also ensure that you upgrade the integration
components in the VM's after the migration.
4) That is an option - though you might find you like SCVMM
5) Recreating VM's using existing VHD's has some issues for example the BIOS GUID changes, all of the NIC's are re-plug and played etc... When possible copying the configuration or using export is much better.
6) The sooner the better - VHDx has a number of significant advantages, you can do the migration using the Hyper-V manager UI (edit disk) or via powershell with Convert-VHD. Do keep in mind that during the conversation you need 2x the space (for the
original and the new VHDx).
7) In the past you could get into trouble if you for example snapshotted an AD virtual machine and than reverted it - taking one offline and then brining it back online was never a problem. In Windows Server 2012 we addressed this with a feature called
generation ID's.
Domain considerations... A few things to keep in mind regarding the choice to not domain join the Hyper-V server.
- You can't live migrate virtual machines
- You can't utilize Hyper-V over SMB
- Management is more difficult and less secure
-Taylor Brown -Program Manager, Hyper-V -http://blogs.msdn.com/taylorb

Server migration questions

Hi all: I will soon be migrating an OES2sp3 server to OES11sp1. I have read through the migration docs but still I have a few questions I need answered/clarified.
1. When installing OES11 on the target server, I have to give it a name and bring it into the tree. When the migration takes place, will all instances of the target server, both in OES and SLES, get renamed to that of the source server? Most notably the internal server CA_default certificate, which gets named during OES installation.
2. Prior to migration and docs say to create the driver store and print manager on the target server. Do I just give them a temp name as the transfer ID task will rename everything when it runs?
3. The server being migrated is our CA server. My plan was to move the CA to a different server temporarily to another OES server, and once the migration is finished, move it back. Does that seem reasonable?
Thanks, Chris.

I hate when I do that.
>>> smflood<[email protected]> 12/12/2013 6:06 PM >>>
cmosentine;2297649 Wrote:
> Hi all: I will soon be migrating an OES2sp3 server to OES11sp1. I have
> read through the migration docs but still I have a few questions I need
> answered/clarified.
Given that you are asking about migrating from OES2 SP3 to OES11 SP1
then I suggest reposting in the OES11 (Linux) Migration forum @
https://forums.novell.com/novell-pro...oes-migration/
as this is a NetWare-related forum.
HTH.
Simon
Novell Knowledge Partner
If you find this post helpful and are logged into the web interface,
please show your appreciation and click on the star below. Thanks.
smflood's Profile: https://forums.novell.com/member.php?userid=617
View this thread: https://forums.novell.com/showthread.php?t=473395

Vg 224 to Vg 350 migration question

Hi,
Running a cluster of CUCM v-8.6.2.22900-9
We have 2 VG350s we just got in and are in the process of migrating off our vg224's. It is very tedious having to configure every port on the 350 manually to mimic the 224. I know about bulk admin a little but wasnt sure if there was a good process to do this migration using the .bat process or if there is another way to do this. I pulled a report from a 224 hoping it would give me what i need to add to the .bat file but no such luck.
Essentially we just want to mass migrate the 224's CUCM configs to the 350s without having to do them one by one.
Can this be done?
Thanks in advance!

We are in a similar situation. We have VG224s (however, we're not replacing those at the moment), but for future sites, we are going to use VG350's for cost/power/space advantages with the amount of analog ports we will be using.
We have CUCM 8.6.2 and when I go into the Bulk tool to "insert gateways", I don't see VG350 listed there, just a few others, like VG224, VG204, etc.
Expanding on your question, is it possible to bulk import VG350's yet? Do we need to add a "device pack" to CUCM to do so? I can add a VG350 as a device type, just can't bulk import it seems.
Pete

Development to Production / Migration questions

I have a few questions that relate to migrations from a development instance to production, and keeping the environments in sync.
BACKGROUND INFO
As a "side" project at my place of employment I have created an APEX app that is being used and has been very well received. Since it went well, they have now asked for a 2nd larger application and have assigned a 2nd person to work with me on this. The other person is gung-ho that we need to develop in a development instance and then migrate to production when we are ready to go live so we have been working this way. At this point, we have 2 totally separate APEX workspaces, lets call them DEV and PROD for now. This sounds great on paper, but I have experienced a few challenges.
MY QUESTIONS
1. Lets say we log into DEV and make a few minor changes to a single page. There does not seem to be a way to migrate just the one single page or its changes into PROD. It seems the only way would be to migrate the entire app over again, which seems silly if we only made 1 or 2 small changes.
2. Assuming the answer to question #1 is NO (in other words every little change requires migrating the entire app), then how can I avoid the URL changing after each migration?
3. It seems when migrating over DB schema objects (tables, views, procedures, etc..) APEX generates a massive script for you broken into ndividual sub-scripts separated by a slash. However, it also seems that you can't simply run the entire massive script at once, but must run each individual sub-script one at a time. Is there a quicker way?
4. Is there an easy way to migrate over any scheduled jobs I created with DBMS_SCHEDULER?
5. At this point, DEV and PROD are rather out of sync, so I would like to essentially start over and erase DEV and then rebuild it by simply making a copy of PROD (if this is possible). In other words I'm looking for any info on how to create a refresh process. Mind you, I don't have actual DBA access (only access is via the APEX web interface) so is there an easy way to clone one APEX workspace into another without DBA privileges?
6. I assume the answer to #5 is NO. Assuming this, is there a quick way to basically erase everything in APEX workspace, and then I can manually start migrating objects from PROD in?
Any tips/suggestions/recommendations are appreciated.
Thank you,
Paul

Welcome to the forum.. I will try to answer your questions in order..
user720285 wrote:
I have a few questions that relate to migrations from a development instance to production, and keeping the environments in sync.
BACKGROUND INFO
As a "side" project at my place of employment I have created an APEX app that is being used and has been very well received. Since it went well, they have now asked for a 2nd larger application and have assigned a 2nd person to work with me on this. The other person is gung-ho that we need to develop in a development instance and then migrate to production when we are ready to go live so we have been working this way. At this point, we have 2 totally separate APEX workspaces, lets call them DEV and PROD for now. This sounds great on paper, but I have experienced a few challenges.
MY QUESTIONS
1. Lets say we log into DEV and make a few minor changes to a single page. There does not seem to be a way to migrate just the one single page or its changes into PROD. It seems the only way would be to migrate the entire app over again, which seems silly if we only made 1 or 2 small changes. If your apps BOTH have the same APP ID, you can export pages from development and import them into your production application, via the import/export mechanism in APEX. However, you MUST keep the app id's in sync.
>
2. Assuming the answer to question #1 is NO (in other words every little change requires migrating the entire app), then how can I avoid the URL changing after each migration?Refer to answer given in #1.. Also, you can use an application alias, so that if you DO change the app id, the url should NOT change, since you are using the alias as apposed to App id in url string.
>
3. It seems when migrating over DB schema objects (tables, views, procedures, etc..) APEX generates a massive script for you broken into ndividual sub-scripts separated by a slash. However, it also seems that you can't simply run the entire massive script at once, but must run each individual sub-script one at a time. Is there a quicker way?What I recommend, is to bundle the ddl code as part of the install script, under supporting objects in your application, thus the code can be run in it's entirety when you do an install of your application.
>
4. Is there an easy way to migrate over any scheduled jobs I created with DBMS_SCHEDULER?I would bundle this in the install code of your application, as noted above. Since it is just a pl/sql script to submit your dbms_scheduler job<s>, it makes sense to do it this way in a script with ddl objects building.
>
5. At this point, DEV and PROD are rather out of sync, so I would like to essentially start over and erase DEV and then rebuild it by simply making a copy of PROD (if this is possible). In other words I'm looking for any info on how to create a refresh process. Mind you, I don't have actual DBA access (only access is via the APEX web interface) so is there an easy way to clone one APEX workspace into another without DBA privileges? If you are serious about wanting to wipe development out, there are scripts about that will allow you to wipe ALL database objects from a schema, and then you would delete the applications in development. Then you could just export your application and database objects and data from production and import them in development.
For the database data I would use sql developer to build insert scripts and load them into the supporting objects section of application with the ddl to Build the objects..
>
6. I assume the answer to #5 is NO. Assuming this, is there a quick way to basically erase everything in APEX workspace, and then I can manually start migrating objects from PROD in?
Any tips/suggestions/recommendations are appreciated.
Thank you,
PaulThank you,
Tony Miller
Raleigh, NC

Migration questions from Exchange 2007 to Exchange 2013

Dear Forum Members,
I'd ask just two short questions, regarding a migration from Small Business Server 2008 (Exchange 2007) to 2013. We installed the two Exchange 2013 servers, configured a DAG and updated every single URL (OWA, ECP, AnyWhere, Autodiscover etc.) to be a mail.domain.com
record (DNS round robin, since no HW load balancer :( )
Thankfully, the mail flow between the Internet and the other Exchange 2007 users are still working. Now for those users I've already migrated, if I check outlook connections there are several connections for GUID based servers via the DNS Round Robin
name proxy (the AnyWhere address). But I saw that there are still just one connection (type: Exchange Public Folders) to the old 2007 server. Is it okay? I'm a bit afraid to uninstall it because of this.
And the other thing: Based on what I wrote, do you think I've done it good? Or could I miss any important things? You are much experienced than me in these migrations so I hope that I can get some confirmation/advice here :(
ps: Is it good if I set NTLM authentication for Outlook AnyWhere?
Thank you really much for your help,
Best Regards,
Chris

Hi Chris,
Agree with Hinte, the user will still connect to the exchange 2007 server if there is a public folder database in the old server.
If the old public folders are no longer in use, you can delete the public folder database and create a new one in the exchange 2013 server, you can also consider migrating public folders to Exchange 2013 .
The following articles for your reference:
Use serial migration to migrate public folders to Exchange 2013 from previous versions
Set up public folders in a new organization
Step-by-Step Exchange 2007 to 2013 Migration
>>Is it good if I set NTLM authentication for Outlook AnyWhere?
The Outlook Anywhere authentication method you choose will depend on a few factors in your environment,
I recommend you refer to the following thread to understand how to choose:
https://social.technet.microsoft.com/Forums/exchange/en-US/75f8d6c4-70f4-49e5-ac32-a49dd91b5520/outlook-anywhere-ntlm-for-internal-users-and-basic-for-external-users?forum=exchangesvrclients
Exchange 2013: Configuring Outlook anywhere
Best regards,
Please remember to mark the replies as answers if they help, and unmark the answers if they provide no help. If you have feedback for TechNet Support, contact [email protected]
Niko Cheng
TechNet Community Support

Open Directory Migration Question

Setup:
My company has two servers, both running 10.5.6. We are migrating from the server Fubar (xserve) as it has had a lot of problems and we want to do a fresh install on it (I was not the admin who initially set it up).
In order to get a 'fresh' OD going, we are recreating all the accounts on the new server Edoras (powerpc mac pro), making sure to preserve UID of the users.
Problem:
User A cannot change his password on Edoras after Directory Utility has been changed to point at it. He can change his password locally, but it does not propagate to Edoras, nor does a password change on Edoras affect his local machine.
The questions I haven't been able to get answers for are:
* Should the OD search string be different on Fubar and Edoras? Currently our search string is 'dc=fubar,dc=domain,dc=com'.
* Are there other attributes that have to be setup in OD besides UID? I noticed when using the Target tab in Workgroup Manager that there is a GeneratedUID attribute, does this need to match?
Thanks for any information/help.

I did something like this recently. Unfortunately I couldn't get an answer on the Internet and had to re-configure Directory Access on the client machines manually.
I moved our system from a POwerMac G4 with several upgrades (eSATA card, eSATA Coolgear Enclosure, 7200.11 (yeah I know, bad drives to use) Seagate drives, 1.8 GHz PPC 7447 upgrade, 1.5GB of ram) to a new Mac Pro with a Highpoint RAID controller. The old G4 was very unreliable and couldn't hand
I had to go to each machine with ARD, open Directory Access, delete the LDAP entry and re-enter it. This was really annoying and confusing for me as the old server and the new server had:
The same version of OSX (ok, one was a PPC version and I special ordered the Intel version from Apple Tech Support), but they both were running 10.4.11 with the newest security patches.
The same OD Search Strings
The same IP Address for the Server
The same DNS name for the server
and the same user IDs and group settings
and I still had to re-do Directory Access using the client machines. Before re-doing the Directory Access re-binding I would try to login. The "other" icon would appear on the loging window, but when I would loging with the correct username and password the login windows would "shake it's head" and wouldn't let me login.
The biggest pain was that portable directories didn't sync correct anymore, so I had to manually backup, then delete the account, then re-bind, then re-create and restore the portable directory on each laptop manually.
Unfortunately I do not know the unix command to change directory binding to client computers using ARD. If such a command exists it would make things much easier for you. Does anyone know if a command exists?

Forms system potential migration questions.

We have a forms and reports based system built in 10g.
We are considering migrating to 11g forms and reports but long term moving to ADF or APEX.
We are generally a data entry system run on intranet so my prefernence has always been APEX but management are trying to follow the Oracle roadmap which is pushing ADF.
We are a small outfit so the solution we choose will probably be the one which offers the quickest development times.
I have signed up for apex.oracle.com to have a play but seems to be taking forever to get approval!
A few questions re APEX (apologies if these are really simple)
1) How is user access controlled. Currently all our users login via one SYSDBA user. Our current system has a logon box which then allows access to the screens they can amend. I assume APEX uses the DB user access rights?
2) How easy is it to deploy fixes etc? We have upwards of 200 customer sites. We currently distribute fmx an RDF files on a monthly basis.
3) Can you use key strokes? Many customers like the F Keys to be used as quick keys? i.e. in forms F10 can be save, F3 can be clear etc
4) Can we use our existing database? Although this is many years old and all the correct constraints may not be in place (ie. a few FK/indexes may be missing - but we could try and tidy up pre migration) would it be possible to use this. We are consdiering rewriting the database but most customers will want to bring through their old data and have custom reports built on these so would struggle to rewrite)
5) How is inheritance handled? In our forms environment all our items are inherited from one point so if we change that one point it follows through the system
6) I have seen online demo were by people are creating mini databases from spreadsheets. Can it be setup so the users can create things like this without affecting other areas of the system?
7) Any pros/Cons when comparing to ADF
8) Any people any fedback from migrating from Forms
Any feedback at all is greatfully recieved.
Im looking forward to the online demo.

Sure Oracle pushes ADF, because it has cost them $$$$$$ and they want to get that back. Apex is part of the database, and as such you already have a license for it. No need for a Weblogic or OAS license.
seems to be taking forever to get approval!Went pretty fast for me a few years ago. 1-2 days if I remember correctly.
1) There are pre-built authentication methods, but you can also create your own method (which most people do).
I assume APEX uses the DB user access rights?As in most web applications, there is only one user that actually accesses the database. And I would never ever make that a SYSDBA user!
Other users may log in via username/password that can be stored in Apex tables or your own tables. They can also be actual database users. However, since they do not connect to the database, their roles are irrelevant. You may use these roles to check authorization in your application, though.
2) Apex exports applications in a sql file, so you can deploy applications via sqlplus (or via the Apex administrator page).
3) The keys are actually browser keys, so you are very limited. You can use some Javascript, but forget about something like F7-F8 combination. It doesn't matter what technology you use, web is different from client/server (or the Forms Java applet). You have to rethink GUI concepts coming from Forms and going to browser applications.
4) Yes. But like Forms, good database design makes thinks easier (like using wizards).
5) There are all kinds of places where you can set defaults, templates etc.
6) Yes.
7) Google for discussions on ADF vs Apex.
8) We use it side by side. No plans to recreate Forms as an Apex application.
Depending on the size of your Forms app, it may take a long time to re-create it in Apex. There are some Forms migration tools in Apex, but I wouldn't use those. They cannot migrate the Forms code anyway, since a browser doesn't understand pl/sql code. As said, you really have to rethink your GUI when moving to a web app.

Another migration question

Similar Messages

Maybe you are looking for