Another shot battery thread

Howdy folks!
Purchsed my 15" MBP JAN of 2008 and here are my battery results:
Battery Information:
Model Information:
Serial Number: Sony-ASMB012-374b-7706
Manufacturer: Sony
Device name: ASMB012
Pack Lot Code: 0001
PCB Lot Code: 0000
Firmware Version: 0110
Hardware Revision: 0500
Cell Revision: 0303
Charge Information:
Charge remaining (mAh): 1210
Fully charged: No
Charging: No
Full charge capacity (mAh): 2123
Health Information:
Cycle count: 80
Condition: Check Battery
Battery Installed: Yes
Amperage (mA): -1145
Voltage (mV): 11594
Pretty sure I'm not eligible for a warranty battery, but I really expected better especially after paying over $2K on this thing. What really burns me up is that I calibrated the battery and did all the things listed on the website to preserve the battery.
I know this one isolated example shouldn't put me off from Apple, but I will say that this will be the very last Apple laptop I ever buy. For the price I could have purchased a pretty nice PC laptop and a spare battery which would have come with a complimentary processor, memory, case, keyboard, display, and CD-ROM burner....

Hi konish,
Out of curiosity, do you have Applecare on the unit? Reason I ask, here is an excerpt on Apple's website regarding battery coverage:
*Notebook Owners*
+Your one-year warranty includes replacement coverage for a defective battery. You can extend your replacement coverage for a defective battery to three years from the date of your notebook purchase with the AppleCare Protection Plan. However, the AppleCare Protection Plan for notebook computers does not cover batteries that have failed or are exhibiting diminished capacity except when the failure or diminished capacity is the result of a manufacturing defect.+
http://www.apple.com/batteries/replacements.html

Similar Messages

Yet another grey folder thread, help!

Sorry for yet another grey folder thread, but here goes:
Today, earlier, installed Firefox update, along with some addon updates for that program. Quit Firefox and attempt to relaunch, relaunch fails. Reset computer, thinking that will do the trick, I now have grey folder with question mark.
Resolve attempts: reset pram = fail; apple care cd = will not launch/fail; disk utility from original install disks = fail; cannot get repair of disk or permissions to work, continually get error about "failing on exit"; safe mode launch = fail
So, I've done everything, and I've come to conclusion that I am f***, and my HDD is fried (but I hope I am wrong).
So, dear gurus, my question(s)
A) Is my HDD salvageable at all? is there some trick to getting the AppleCare cd to work? Anything?!?!
if not, then B) How can I recover my documents/music/pictures? Long story short, there are several things on there that never had a chance to make my back up schedule, and I desperately want to keep them. Any way to make/copy a disk image to save the docs/imgs, or Firewire them to an external hdd? Do I need to consider a professional HDD rescue?

Looks like a mechanical failure, and Apple won't cover the replacement due to a drop it sustained a year or two ago (the power cable was in, and it fell on the connection point, denting that in, Apple states there is a critical board their and that it would be $950 Tier 3 repair which I can't afford). So I'm going to try a Firewire Migration and a few other things and see if that works. If not, oh well. Thanks everyone for the ideas!

Give it another shot? X58 Pro build

Well, after about a month of instability with my X58 Pro board, I finally returned it. Though my only option was to do an exchange for the same board. Here I sit with a bad taste in my mouth with this board and I am thinking about giving it another shot.
I never could get the system to run stable for more than 48 hrs. I had a good run twice of 30 hr and another at around 48. usually the system would lock up or reboot ~ twice a day.
specs
i7 920
Corsair TR3X6G1600C9G
OCZ 700w PSU
4870 1gig graphics
I have these now installed on another manufacturer's board and I have broken the 48 hr mark of stability.... same components and I did not do a reinstall of the OS
Anyways, thinking of either putting the unopened MSI board on Ebay, or possibly doing another build and turning my wife's machine into a server and giving her the X58 pro based machine.
Should I cut my losses or give it another shot?

Quote from: Zivman on 03-May-09, 09:14:09
Well, after about a month of instability with my X58 Pro board, I finally returned it. Though my only option was to do an exchange for the same board. Here I sit with a bad taste in my mouth with this board and I am thinking about giving it another shot.
I never could get the system to run stable for more than 48 hrs. I had a good run twice of 30 hr and another at around 48. usually the system would lock up or reboot ~ twice a day.
specs
i7 920
Corsair TR3X6G1600C9G
OCZ 700w PSU
4870 1gig graphics
I have these now installed on another manufacturer's board and I have broken the 48 hr mark of stability.... same components and I did not do a reinstall of the OS
Anyways, thinking of either putting the unopened MSI board on Ebay, or possibly doing another build and turning my wife's machine into a server and giving her the X58 pro based machine.
Should I cut my losses or give it another shot?
I say the odds are extremely low that you'll have another mobo like the one you returned. Were you overclocking the mobo you returned? Except for the power supply we have nearly identical hardware (I have a 750w Corsair) and my rig has been rock solid.

Yet another 3G battery charge issue/question

All...
Lately my iPhone 3G is draining it's battery much quicker than it had previously. It will not last a full day. Even with no Safari, games, music, etc. Also, when I charge it, it gets hot, more than usual.
Not sure, but I think this all started when I let the battery completely drain. I partially charged then the battery completely drained again.
I've reset shut the phone off then back on with no improvement. I've had the phone for less than a year. Apple replaced my 1st 3G with this phone due to another issue.
I'm going to let the battery completely drain then will completely charge to see if that helps. Otherwise, any ideas?
Message was edited by: Greg Begay

I am having the same problem. It barely makes it through 12 hours now, when previously I was used to about 36 hours. It has only started doing it recently, but I'm not entirely sure what I've done to provoke it.
Have seen similar issues in other threads, with people suggesting restoring/updating etc. I am yet to try this so will give it a go, but not convinced it will help.
Message was edited by: bigtom182

Can anyone help?? Another new MacPro thread....

Hi all.
Another person here having big issues with PP CC 2014 on the new MacPro..
A little background;
I've been having issues with PP for years. Previously I was a photographer, and Lightroom was my software of choice. That was a great Adobe experience, pretty faultless software really...
Then when I moved to video it was a different story... obviously it's a whole different ballgame dealing with video files, I've not had much luck with my editing workflow!
I was working off an underpowered PC first, then was on a few Macbook Pros. Eventually, I got the go ahead to get a new MacPro from my employer, I thought that would solve all my problems! How wrong I was!
Even after the apparent "fix" for the GPU issues, I'm still having problems...
I'm no Adobe basher....No one wants PP to work well more than me (Al Mooney got highly offended on Twitter after I suggested PP might be slightly less than perfect!)
I'm hoping I might get some tips to improve performance or even a fix for the issues I'm having.
Here's the gist of my specs, can give more if needed;
Yosemite 10.10.2 (14C109)
Mac Pro (Late 2013)
3.5 GHz 6-Core Intel Xeon E5
64 GB 1866 MHz DDR3 ECC
AMD FirePro D700 6144 MB
My main drive is a G RAID 8GB TB2
So,
My main issue is that when a sequence gets more complex, the performance dips massively, to the point where it's unusable and crashes constantly.
The timeline freezes, the playhead is laggy, the system gets really slow to respond in general..... Maybe 15 seconds for the keyboard to respond to keypresses. (or else I need to tap spacebar twice instead of once to get it to respond). If I try to make any change on the timeline that anything more than a simple delete etc, the system can freeze and I need to force quit.
Another symptom is that when quitting the program, often it doesn't quit properly and I need to force quit.
The sequences I'm working on don't seem that demanding (especially give the machine I have) so it's really confusing as to what the issue is.
We're talking videos usually in the 2 -5 minutes range. Maybe 4 video layers. Footage wise; generally 1080p XAVC from a Sony F5, some Canon 4K from a 1DC. Can PP really handle native footage, should I be transcoding??? One of the big benefits of PP is the apparent ability to handle native formats, so it's really disappointing if that's the issue....
I do use a reasonable amount of plugins, like Izotope for denoising dialogue, the dreaded Red Giant plugins, and occasionally Red Giant Denoiser (is this the root of my problems??!). My current project has two layers keyed interviews (2 angles) and I'm using Ultrakey for that. (I bought Red Giant Primatte Keyer, but my system isn't powerful enough to run it without major issues....ridiculous!!)
If anyone has any suggestions I'd love to hear them. I've read other threads but my issue seems different. I can't rule out that I'm making some obvious mistake in my workflow either... so any general workflow best practise tips in that regard would be good too.
Sorry for the long thread and thanks for reading.

Hi healyb2,
Sorry you're experiencing this issue.
I think I've identified one of the issues, Izotope 4 Dialogue Denoiser.....
I've disabled it on an existing sequence and the crashes have stopped (for now).
Let us know if these issues crop up again. You can let us know directly here: http://adobe.ly/ReportBug
So, possibly (like Red Giant) Izotope plugins may not work usably in Premiere Pro....... which really grinds my gears......
Actually, we work hand in hand with plug-ins developers in the realm of compatibility. Some of these plug-ins companies are quite small so you have to pay close attention to precisely what is supported for the host application. In some cases, it takes some time to catch up to the latest versions.
why are Adobe not calling out the plugins as not usable? What about the plugin manufacturers themselves? I can't see this being a performance issue on my end...frustrating!
That's actually up to the plug-ins manufacturers. Please communicate with them accordingly regarding compatibility. Sorry for any confusion this may have brought about.
Thanks,
Kevin

Another SLOW Lightroom Thread

Just another thread to document the major issues I'm having with Lightroom 4.
System: Dell Studio XPS running Windows 7 Home Premium, Intel i7-720QM, 8 GB RAM 1333MHz, 500 GB HD, ATI Radeon 4670 1GB with Wacom Intuos 5
Working in the Develop module has been completely unacceptable and is costing me hours of editing time and frustrating, which means its costing me money. Everything from navigating between photos to adjusting slider bars seems to be laggy to put it lightly. After using the Adjustment Brush, making universal changes is taking forever! And if I got back to create an additional adjustment with the Adjustment Brush tool, it's almost not even worth it because it is so slow to respond. Similar to the slow downs after using the Adjustment Brush tool, any changes made after making any adjustments in the Lens Correction tab seem to be super sluggish as well. Oh top of it all, my computer is running extremely hot when running Lightroom, which ever occured in past versions!
I've tried several suggestions that I've seen in forums, such as creating a fresh Catalog and importing the files directly into that new Catalog, hiding the Histogram to free up resources, reducing the size of the Catalog to just the working set I'm currently working on... I've now installed the 4.1 RC and do seem to see some increase in response with the sliders within the develop module, but once I start using the Adjustment Brush and Lens Correction, it seems to be back to it's sluggish self. And after editing a few photos, the entire program is crawling.
I think it's great that Adobe has such a strong following that people seem to be so understanding and patient about these issues, but find it unacceptable that such an unpolished release was issued to the public. If the issues are eventually remedied I will be fully on board with Lightroom, once again, because I do think that the revamped develop module has been a major improvement for editing and workflow, but all those improvements are pretty useless when I'm losing so many hours battling with performance issues.

No changes, nothing at all, in actual fact I don't even have a PC connected to this broadband line it's purely for the games consoles. I have a separate broadband line for my home office etc.
Just had a call from BT India, with out wishing to sound derogatory I might as well talk to my pet cat. Apparently they were ringing to see if the problem had been resolved, I only reported it 2 hrs ago.

Yet another colour management thread

Here is a warm, saturated image worked on in lightroom, converted to adobe RGB on export, converted to SRGB on output from photoshop. (srg profile not embedded).
Its far too saturated and red
Here is the same image with the adobe rgb tagged.
and as srg with the profile embedded.
Now my understanding is that in IE all of these will display the same (and they do, i've tested it), and they all look like the oversaturated red one. I also understand that the gamut of your monitor will affect just how red they actually appear.
Windows also displays them all the same - the uber red version.
So the question is - how the frick are we supposed to supply these to our clients? Bearing in mind they all have different monitors, browsers, OS's. I've just had the client on the phone complaining about the saturation and it just sounds like so much ******** waffling about gamut and colour managed browsers.
Are you to just avoid warm saturated images? Is there an application that we can distribute with the images that will display them correctly? Because if I leave them on a DVD I have no control over what viewer will mangle the colour management.
I'd love some feedback on how other photographers deal with this issue.
EDIT: and joy of joys, adobe obviously strips out the colour managment when these are posted - because the 2nd two look correct in the edit window, but the same as the first when I post it

I clearly see the differences in you screen shot, although my version of IE seems to obey the color profiles I embed in our imagery.
I deal with color management like others in this thread - I use calibrated monitors, I profile using sRGB (the lowest common denominator tag for general digital distribution IMO) and advise my clients to do the same (calibrate!). Some commercial clients require CMYK, in that case I edit completly in sRGB and only convert to CMYK when creating final delivery imagery. I use Adobe PS default CMYK settings and I specify this up front in contractual agreements. I have yet to get many complaints that cannot be explained by failure to understand the huge variations in hardware and software that a viewer of digital images might encounter. This allows me to do the best I can and you gotta just let the rest go .

Yet another DVD Playback thread...

Gone through every other thread related to DVD playback issues when you do a forum search for "dvd playback". If I try to play a DVD, the disc spins for quite a while while (S)MPlayer just sits there and eventually crashes. Tried this with multiple DVDs, updated all my software...here's the log. It doesn't play in xine or VLC either.
/usr/bin/mplayer -noquiet -nofs -sub-fuzziness 1 -identify -slave -vo xv -ao oss -zoom -nokeepaspect -framedrop -input conf=/usr/share/smplayer/input.conf -stop-xscreensaver -wid 41943052 -monitorpixelaspect 1 -subfont-autoscale 1 -subfont-text-scale 5 -subcp ISO-8859-1 -subpos 100 -contrast 0 -brightness 0 -hue 0 -saturation 0 -dvd-device /dev/dvd -dvdangle 1 -nocache -osdlevel 1 -vf-add screenshot -channels 2 dvd://1
MPlayer 1.0rc2-4.2.3 (C) 2000-2007 MPlayer Team
CPU: Intel(R) Core(TM)2 Duo CPU T9500 @ 2.60GHz (Family: 6, Model: 23, Stepping: 6)
CPUflags: MMX: 1 MMX2: 1 3DNow: 0 3DNow2: 0 SSE: 1 SSE2: 1
Compiled with runtime CPU detection.
115 audio & 237 video codecs
mplayer: could not connect to socket
mplayer: No such file or directory
Failed to open LIRC support. You will not be able to use your remote control.
Playing dvd://1.
libdvdread: Invalid main menu IFO (VIDEO_TS.IFO).
ID_DVD_TITLES=19
ID_DVD_TITLE_1_CHAPTERS=5
ID_DVD_TITLE_1_ANGLES=1
ID_DVD_TITLE_2_CHAPTERS=5
ID_DVD_TITLE_2_ANGLES=1
ID_DVD_TITLE_3_CHAPTERS=5
ID_DVD_TITLE_3_ANGLES=1
ID_DVD_TITLE_4_CHAPTERS=5
ID_DVD_TITLE_4_ANGLES=1
ID_DVD_TITLE_5_CHAPTERS=5
ID_DVD_TITLE_5_ANGLES=1
ID_DVD_TITLE_6_CHAPTERS=2
ID_DVD_TITLE_6_ANGLES=1
ID_DVD_TITLE_7_CHAPTERS=2
ID_DVD_TITLE_7_ANGLES=1
ID_DVD_TITLE_8_CHAPTERS=4
ID_DVD_TITLE_8_ANGLES=1
ID_DVD_TITLE_9_CHAPTERS=2
ID_DVD_TITLE_9_ANGLES=1
ID_DVD_TITLE_10_CHAPTERS=2
ID_DVD_TITLE_10_ANGLES=1
ID_DVD_TITLE_11_CHAPTERS=2
ID_DVD_TITLE_11_ANGLES=1
ID_DVD_TITLE_12_CHAPTERS=2
ID_DVD_TITLE_12_ANGLES=1
ID_DVD_TITLE_13_CHAPTERS=5
ID_DVD_TITLE_13_ANGLES=1
ID_DVD_TITLE_14_CHAPTERS=2
ID_DVD_TITLE_14_ANGLES=1
ID_DVD_TITLE_15_CHAPTERS=2
ID_DVD_TITLE_15_ANGLES=1
ID_DVD_TITLE_16_CHAPTERS=2
ID_DVD_TITLE_16_ANGLES=1
ID_DVD_TITLE_17_CHAPTERS=2
ID_DVD_TITLE_17_ANGLES=1
ID_DVD_TITLE_18_CHAPTERS=2
ID_DVD_TITLE_18_ANGLES=1
ID_DVD_TITLE_19_CHAPTERS=2
ID_DVD_TITLE_19_ANGLES=1
*** Zero check failed in ifo_read.c:1361
for vts_tmapt->zero_1 = 0x1b01
libdvdread: Invalid title IFO (VTS_01_0.IFO).
ID_DVD_TITLE_19_LENGTH=6.333
ID_DVD_TITLE_1_LENGTH=1402.600
ID_DVD_TITLE_2_LENGTH=1412.600
ID_DVD_TITLE_3_LENGTH=1412.600
ID_DVD_TITLE_4_LENGTH=1411.934
ID_DVD_TITLE_5_LENGTH=1406.600
ID_DVD_TITLE_6_LENGTH=1271.066
ID_DVD_TITLE_7_LENGTH=483.033
ID_DVD_TITLE_8_LENGTH=740.000
ID_DVD_TITLE_9_LENGTH=279.533
ID_DVD_TITLE_10_LENGTH=260.033
ID_DVD_TITLE_11_LENGTH=203.100
ID_DVD_TITLE_12_LENGTH=591.300
ID_DVD_TITLE_13_LENGTH=573.033
ID_DVD_TITLE_14_LENGTH=218.166
ID_DVD_TITLE_15_LENGTH=185.333
ID_DVD_TITLE_16_LENGTH=51.533
ID_DVD_TITLE_17_LENGTH=122.000
ID_DVD_TITLE_18_LENGTH=225.900
There are 19 titles on this DVD.
ID_DVD_CURRENT_TITLE=1
There are 5 chapters in this DVD title.
There are 1 angles in this DVD title.
audio stream: 0 format: ac3 (stereo) language: en aid: 128.
ID_AUDIO_ID=128
ID_AID_128_LANG=en
audio stream: 1 format: ac3 (stereo) language: fr aid: 129.
ID_AUDIO_ID=129
ID_AID_129_LANG=fr
audio stream: 2 format: ac3 (stereo) language: es aid: 130.
ID_AUDIO_ID=130
ID_AID_130_LANG=es
audio stream: 3 format: ac3 (stereo) language: en aid: 131.
ID_AUDIO_ID=131
ID_AID_131_LANG=en
number of audio channels on disk: 4.
subtitle ( sid ): 0 language: en
ID_SUBTITLE_ID=0
ID_SID_0_LANG=en
subtitle ( sid ): 1 language: fr
ID_SUBTITLE_ID=1
ID_SID_1_LANG=fr
subtitle ( sid ): 2 language: es
ID_SUBTITLE_ID=2
ID_SID_2_LANG=es
subtitle ( sid ): 3 language: pt
ID_SUBTITLE_ID=3
ID_SID_3_LANG=pt
subtitle ( sid ): 4 language: en
ID_SUBTITLE_ID=4
ID_SID_4_LANG=en
subtitle ( sid ): 5 language: es
ID_SUBTITLE_ID=5
ID_SID_5_LANG=es
subtitle ( sid ): 6 language: pt
ID_SUBTITLE_ID=6
ID_SID_6_LANG=pt
subtitle ( sid ): 7 language: es
ID_SUBTITLE_ID=7
ID_SID_7_LANG=es
subtitle ( sid ): 8 language: pt
ID_SUBTITLE_ID=8
ID_SID_8_LANG=pt
number of subtitles on disk: 9
CHAPTERS: 00:00:00,00:00:45,00:11:29,00:22:35,00:23:21,
ID_AUDIO_ID=128
ID_VIDEO_ID=0
MPEG-PS file format detected.
ID_AUDIO_ID=131
ID_AUDIO_ID=130
ID_AUDIO_ID=129
ID_SUBTITLE_ID=3
ID_SUBTITLE_ID=2
ID_SUBTITLE_ID=0
ID_SUBTITLE_ID=6
ID_SUBTITLE_ID=5
ID_SUBTITLE_ID=4
ID_SUBTITLE_ID=1
edit: tried installing ogle to see what i could do with that, this libdvdcss output might come in handy. this doesn't make a whole lot of sense because i have libdvdcss and all installed.
[sa@mootop ~]$ ogle
ERROR[ogle_nav]: ifoRead_VTS_ATRT faild
libdvdread: Error cracking CSS key for /VIDEO_TS/VIDEO_TS.VOB (0x000003a0)
libdvdread: Error cracking CSS key for /VIDEO_TS/VTS_01_0.VOB (0x00005c80)
libdvdread: Error cracking CSS key for /VIDEO_TS/VTS_01_1.VOB (0x00018120)!!
libdvdread: Error cracking CSS key for /VIDEO_TS/VTS_02_0.VOB (0x00018360)
libdvdread: Error cracking CSS key for /VIDEO_TS/VTS_02_1.VOB (0x00018380)!!
libdvdread: Error cracking CSS key for /VIDEO_TS/VTS_03_0.VOB (0x002379c0)
libdvdread: Error cracking CSS key for /VIDEO_TS/VTS_03_1.VOB (0x002379e0)!!
libdvdread: Error cracking CSS key for /VIDEO_TS/VTS_04_0.VOB (0x0029c000)
libdvdread: Error cracking CSS key for /VIDEO_TS/VTS_04_1.VOB (0x0029c020)!!
libdvdread: Error cracking CSS key for /VIDEO_TS/VTS_05_0.VOB (0x002c21e0)
libdvdread: Error cracking CSS key for /VIDEO_TS/VTS_05_1.VOB (0x002c2200)!!
libdvdread: Error cracking CSS key for /VIDEO_TS/VTS_06_0.VOB (0x002fe7e0)
libdvdread: Error cracking CSS key for /VIDEO_TS/VTS_06_1.VOB (0x002fe800)!!
libdvdread: Error cracking CSS key for /VIDEO_TS/VTS_07_0.VOB (0x0032ce60)
libdvdread: Error cracking CSS key for /VIDEO_TS/VTS_07_1.VOB (0x0032ce80)!!
libdvdread: Error cracking CSS key for /VIDEO_TS/VTS_08_0.VOB (0x0035d560)
libdvdread: Error cracking CSS key for /VIDEO_TS/VTS_08_1.VOB (0x0035d580)!!
FATAL[ogle_mpeg_ps]: dvdreadblocks failed
Last edited by sa (2008-05-30 01:19:27)

Sort of looks like hardware issues to me. Do you know that the drive works (i.e. tested in another OS, or it used to work and just stopped?)
Did you try just mplayer dvd:// ? That's quite a long options list you've got there.
What kind of drive is it?

Another T60 help thread

Ok, so I have quite a few issues.
I have:
-T60 200749U - Windows 7- 2GB - Dual HDD
-Advanced Dock 2503 - ATI Radeon HD 5450
Now lets tend to the most annoying issue I have.
Ever since I got this thing the headphone jack has not worked properly.
It didn't work when I ran XP, it worked when I ran Vista but only when the switch in the lower left was to the left., now on 7 Ethernet and Headphone ports don't work.
Anyhelp with this would make me a happy guy.
The next thing has to do with my Dock situation.
I got my Advanced dock and installed a ATI graphics card with it.
Now I installed the driver for the card and Catalyst control center changed the settings in BIOS.
All is working fine, I have aero and great picture when plugged into the dock.
Now my issue is that when I am not on the dock I am stuck with Windows basic (which I hate) because I don't have the drivers for the X1300.
Before I installed catalyst and the drivers for the dock's card I had aero running just fine.
I found and tried installing the legacy drivers for the X1300 but that has an old version of Catalyst that doesn't support my Dock's card.
VGA out on the laptop itself no longer works either.
I have a desktop gadget that recognizes the GPU but windows doesn't
I have tried everything I can think of and after 5 system restores and a ton of searching I have had no luck.
Please help.
I had another question but forgot it.
Anyhelp is appreciated and thanks to you all in advance.

Please find this thread:
http://forums.lenovo.com/t5/T61-and-prior-T-series-ThinkPad/IBM-T60-video-driver-ATI-Radeon/m-p/6086...
My home-forum: http://www.thinkpad-forum.de
Wiki: Deutsches ThinkPad-Wiki English ThinkWiki
My ThinkPad-Collection

Another BORIS MISSING thread.

Hi,
I've been looking at several BORIS MISSING threads trying to find a solution, and have not found a good one yet. Here is my problem:
Originally purchased FCP studio 5.0 in 2005. Noticed Boris was missing (never needed it) about a year ago and never figured out how to get it back (didn't try very hard). Upgraded to 5.1.4 about two weeks ago, and it's still missing. Trashing preferences doesn't help.
The specifics:
Boris does not show up under generators in effects tab or in viewer generators popup.
BorisFX folder is in Application Support as it should be, and all necessary files (as mentioned in other threads) seem to be in place. What's more, if I create another account, BORIS WORKS. But I don't want to login to another account every time I want to use Boris.
Something I've noticed: I seem to recall that Boris file icons in Application Support>BorisFX were some sort of "Kind: After Effects" Icons prior to my 5.1.4 install (also prior to my recent purchase of Photoshop). Now they are either "Kind: Unix Executable File" or (under BorisFX>Gradient Styles) "Kind: Adobe Photoshop Gradient File". Would this have anything to do with my problem? Anyone have any ideas for me?
Thanks,
Matt

1. Open your system Plugins folder (not your own FCP User Data folder):
Macintosh Hard Drive/Library/Applications Support/Final Cut Pro System Support/Plugins
2. Copy these folders to the desktop:
Text Scrambler.bundle
Title 3D.bundle
Title Crawl.bundle
Vector Shape.bundle
3. Change the extensions on all four desktop files from bundle to .plugin
This requires password authentication. They will become blank icons.
4. Delete the original .bundle folders from the Plugins folder
7. Move the desktop .plugin files to the Plugins folder
8. Launch FCP and they should now show up under the "Boris"
generators category

Another Magnetic Case Thread

So, I see that several people have asked about the cases with magnets causing problems. The resounding answer seems to be no, so I'm looking for some theories on what might be going on with my touch. I got a leather case that has two magnets on the side to keep it closed, instead of the bottom (as most of the threads seem to deal with). I put my touch in there and a few hours later, it wouldn't come on. I had to reset or whatever they call it when you hold down both the power and home buttons. This happened several times. I charged it, did all the "r"s except a complete restore and it seemed to be ok. That was late at night, so I only tested it for a few minutes, then went to bed. The next morning (this past Tuesday), I was trying to use it and kept having similar problems, only now I would sometimes just get a white screen. I took the case off and left it off. It is now late Wednesday night. I have had my touch out of the case with the magnet for about a day and a half and I haven't had one problem. I didn't do anymore resetting, restoring, etc. It just started functioning normally again. I plan to test the case again tomorrow, but wonder if there are any thoughts on what might have happened. I wondered if maybe the magnet near the WiFi was causing problems in it which was affecting my touch. So, thanks for the input and I'll make a note when I finally get it back in the magnetic case!

AAPL, I saw your response in another thread speaking of how you showed people at college things that magnets did not mess up, but supposedly were supposed to, such as floppy disks, etc. Based on that, I was hoping that you would catch this thread and offer some insight. I'm afraid that I still believe that the magnets are the trouble makers. I know that on the DLO case, the magnets are at the bottom. My case is not the same. The magnets are on the left side at the top and bottom. In addition to my husband putting the case and having the exact same problem, I tried it again. After seeing your response, I put the case back on. FIVE minutes later, I had the exact same problems. iPod wouldn't come on. When it did, I had a flickering screen, then the Apple. I haven't had any trouble with my touch since I took it out of the case Tuesday morning. Now, on Thursday morning, I tried the case again, and voila! Problems. And as soon as I took it out of the case and restarted it, it began functioning as normal. How do you explain that? (That isn't supposed to sound smart alec, but truly curious!) The rest of the case is just leather. I know that isn't causing problems. To me, it is obviously something about the case, so I think that it must be the magnets. Thanks!

20% Battery Warning - Another 3g Battery Test

I know there's a few discussion here concerning battery tests but I think my is different. (special smile) The other threads I've read about battery consumption don't really lay any rules to follow so that readers can make comparisons. They don't list any specifics such as what is on...what update are they on...brightness etc. I would like to start a new one in an attempt to provide more info for others to be able to try to recreate and thus know how there phone compares.
The simplest IMO is when the 20% warning pops up...this is where I would appreciate to get recorded information from my Iphone 3G buddies.
Specification:
-Iphone 3G White
-Running v. 2.0.1
-Serial # starts 85 & last letter is the "R" (not sure how much to reveal here..I can change and add more later if needed)
-Brightness: (under the letters "brighteness" the top one always set in somewhere within there so other can recreate) I set mine under "r"
-Bluetooth: off
-Push/fetch data: off
-GPS/location: off
-3g: ON (all time)
-Wi-Fi: off
-Data Roaming: Off
My results at 20% warning: 95% time on web surfing or watching videos only
usage 3hr 17min
Standby 13hr 9min
Data received: (for fun plus tells us how heavy your use has been thus far) 1,506MB
*P.S. I am not asking you to recreate my usage above..but please follow the template when reporting your 20% warning usage so if some reader wants to recreate your usage they can.* Thanks all!

I went ahead an took my phone's battery to the end. If you do take it to the end post that too.
Usage to the End: all specs as before
usage 4 hrs 22 min
standby 14hrs 14 min
If you do the math you will note that on my test the remainder usage I got which was used to reach 0% battery was actually 25%. Meaning that in actuallity 25% was left when I got the 20% warning...Interesting...who cares just post your finding...hopefully enough will and we can try to analyze some data.
P.S. may want to post the strength of the bars : I was mostly always above 3 bars on 3g.

Yet another iPhone WiFi thread - cannot connect to some OPEN networks

I make no apologies in starting another thread about iPhone WiFi connectivity. Judging by the number of references to WiFi issues in this forum, as well as on the Internet generally, this is a big issue with many users and yet there seems very little acknowledgement by Apple that there is problem.
In my case I have a first generation iPhone which works well on most WiFi networks, both open and closed, including my secured network at home, but cannot connect properly with some open networks. I have had this problem while using 1.0, 2.0 and 2.1 firmware.
Sometimes I get the "Cannot Connect ..." message and sometimes I am able to connect and obtain a good signal and see an IP Address and a Subnet mask, but no Router or DNS address.
I'll repeat that I talking about open networks, so there is no password issue. In one local cafe, I am unable to connect to a network that I used to be able to connect to routinely. I have talked to the owner, who is another Mac and iPhone user and he assures me that he has not changed any router settings.
Can anyone offer any suggestions beyond the usual re-setting and re-booting options? Is there something about iPhone MAC addresses or the WiFi signal that certain routers don't like?
Simon

This is not a solution to your problems but:
1- Expecting someone from Apple to respond here is a vain hope. This is a discussion forum for users and you can only expect responses from users. Talk to Apple tech support if you want a response from them.
2- I saw an item on an iPhone blog page somewhere yesterday saying that Apple was now replacing iPhones with this issue if you took it to an Apple store. Don't know if it's true but it also had a workaround that you could use for your own home network if you were having problems—and I am—and that workaround basically worked for me.
I turned wi-fi off on the phone and opened Airport Utility on my iMac. I turned wi-fi security OFF and then tried to connect. I actually got a connection straight away, and I noted down the IP addresses and subnet mask data from the DHCP screen in the iPhone's wi-fi network info screen. I then restored wi-fi security on my iMac. Of course that restarts the router and I lost my connection and when it started up again, the IP addresses had changed but the subnet mask had not. I swapped to the Static screen instead of the DHCP screen and edited all 3 IP addresses. That got me my connection back and it has continued to work throughout today. That's the best result I've had so far.
It seems to me that my iPhone has problems picking up the network data from my home network and I don't know why that is. I was at a friend's last night and tried to connect to his system and it connected straight away. I assume there's something about my settings which is problematic but I don't know what it is but at least now I have a workaround.
It's possible that something similar is going on for you with the public networks you're having problems with but, unfortunately, the workaround I tried won't work for you in a public network so that's probably not much help.
You could try taking your phone to an Apple Store and seeing if they exchange it. The blog I read suggested the magic words were "hardware problem". In my case I don't think it's a hardware problem but it may be in yours.

Not just another file sharing thread......

Running a forum search gives me a plethora of file sharing threads. Most of these threads are a one answer type of question or a simple "Preferences>Sharing>File Sharing type of answer. I am no expert here, I learn something every time I visit, but I know the basics of file sharing after nearly 20 years of using macs. I have a network set up at my business and home that the computers share and am perfectly comfortable with the basics. I would really like a discussion about more creative options available to expand what I am currently using.
We have four macbook pros here. Two are personal only and the other two are business/personal. The two business MBP's are the ones we use the most, they are the primary machines which go from work to home. Right now they share files but up until now have really been set up for their own workstations for 2 different jobs. Now, we are starting to blend a little bit more of our work and we have had the need to share more files with the 2 computers. It's gotten to a point where basic file sharing isn't enough. The problem I am having is that both computers aren't always within airport range of each other, and both computers aren't always on or awake. So, it's become annoying to have to make sure the machine with the files I need is awake and nearby. So, we have recently started using dropbox to share files that way. The only issue with that is that many of our files are sensitive in nature and security is a bit of a risk. So, I am encrypting volumes with PGP and sharing the encrypted volumes via dropbox. So far it's not been an issue with having the same files open at the same time on both computers to avoid conflicts, I think we'll be ok for awhile. But as this data collection grows, I think it will become impractical. The thing I really like about using dropbox is that both computers don't need to be running at the same time since the files are stored locally and the changes are synced online. Even if I am traveling with one computer, I will usually have an internet connection so the files will update on my partner's computer when I make changes. This is the ultimate in portability and syncing. But like I said, it may become impractical when we put 30-40 Gigs of data up and we can't so easily keep track of what's open on which computer.
So, I would like to know what others do at work or home to share necessary files between multiple computers, other than typical OS X file sharing techniques. I know some applications have a checkout type of feature which might help for certain types of files, but I really want a simple universal setup that my partners and employees can learn without having to think about what type of file they are working with. I have quite a bit of server space I can use for storage of files online if it would help, but syncing would be an issue.
Dropbox may just be the best option for me to share and sync from multiple locations. It makes sense! I just hope some users here have some other recommendations that might work!

Allan Eckert wrote:
As to the PGP questions, as long as you have a file from the DropBox attached and are doing updates they are being sent to the copy on the DropBox. The updates are not all held until you unmount it.
Actually, I'm seeing otherwise. I just ran a test to be sure. I held a pgp disk open for about 5 minutes while copying files to and removing from it. I watched the dropbox folder and the upload activity the whole time and saw no activity or change. The moment I ejected the volume, network activity jumped up and the folder icon in my dropbox turned from synced to syncing in progress. It actually seems to work quite well. The problem I have with it is that if I need to use large files, it will take a long time to upload, because doesn't the whole encrypted volume need to be uploaded again for any minor changes? I haven't tested anything larger than about 20MB, so it's hard to tell.
The drop copy application might actually be quite useful if I were running a file server. I would certainly need an easy to use interface for the actual sharing of the files. If I do go that route, I would prefer for the ability to be able to lock files. As Allan said, drop copy doesn't have that feature, unfortunately.
So, there really isn't a well known solution for this type of application, huh? I may just have to reorganize my plan and stick to removable media for the shared data. If there is only one copy, it can't get mixed up. The only issue I have is when I'm not on premises, how do I share the data with the office? I suppose I will just have to have a better handle on what I need and make sure to have it with me and use dropbox or ftp to upload the files back and forth from office to user.
I just did a test with a decent size PGP virtual disk (125MB) I added one small 3MB jpg file to it and it did an incremental update to sync the file very quickly. I don't know how it's able to do it, but it's doing it. I would have thought it would have to update the whole disk every time, but I guess not. Maybe PGP and dropbox is a better solution that I ever imagined it to be.
Message was edited by: sterlingfive
Message was edited by: sterlingfive

Yet Another Sldeshow Quality Thread

I've read many of the discussions on this forum about slide show image quality problems and have tried a number of the suggestions that people have made. ( For example, checked for upates...have tried both encoding in HP and HQ...have slowed burn speed down to 1X... also tried several different disk brands.) The bottom line, however, is that my photos, which look terrific in iPhoto, look crummy after burning to a disk in iDVD....basically, lacking "definition".
It makes little difference whether I play them back on different dvd players, TVs...or on my computer drive.
Most of my slide shows have been made in iMovie (for control reasons). However, I've also tried going directly from iPhoto to iDVD.
To put this in perspective, I was recently given a cd that was created by Easyshare, containing wedding images that were taken by a point and shoot. At the same wedding, my wife took many shots using an 8 mp SLR. The Easyshare images look better than those in my iDVD slideshow.
Pretty discouraging, but not ready to give up and sure would welcome any ideas people might have.

To put this in perspective, I was recently given a cd
that was created by Easyshare, containing wedding
images that were taken by a point and shoot. At the
same wedding, my wife took many shots using an 8 mp
SLR. The Easyshare images look better than those in
my iDVD slideshow.
You must remember that the DVDs we can produce today were designed to be viewed on conventional TV sets and have only roughly VGA resolution (640x480 pixels NTSC or 768x576 pixels PAL) - in NTSC terms this is LESS THAN 0.3 megapixels!
There is no way a 0.3 megapixel image will come anyplace close to the quality of your 8 megapixels digital camea images. Sorry.
See Preparing images for DVD slideshows at http://docs.info.apple.com/article.html?path=iDVD/6.0/en/17.html for more information.

Another shot battery thread

Similar Messages

Maybe you are looking for