ANSAL from WTs on 0014 and 0015
Hi,
We have a requirement to calculate annual salary by adding up all wage types on infotype 0008 + certain wage types on infotype 0014 and 0015. Is there a way to configure so that the amount on wage types that are on infotype 0014/15 to be added annual salary?
Thanks
Hi Sikander and Praveen,
Looks like I am missing a step, this is what I did and it did not work:
1. Used ANSAL as indirect valuation module for all my wage types on IT-8
2. Used PRZNR as indirect valuation module for my wage type on 14 (Indw-variant = 'J')
3. In table T539J, for ANSAL the valuated wage type is ASAL with 100% for all base wage types on IT-8
4. In table T539J for PRZNT the valuated wage type is my infotyope 0014 wage type and the base wage type is "a wage type number from IT0008" for 100%
5. My feature ANSAL is configured so that it returns ASAL
When I click on the Salary amount on infotype 0008 or call the function module RP_ANSAL_FROM_PERNR, it does not get the amount from infotype 0014. From the above steps do you think I am missing something or did not do someting correctly?
BTW, I dubuged the code in infotype 8 and the function module but did not find any place where it reads data from infotype 14/15.
Please advise.
Thank you
Sunil
Similar Messages
-
Hello Team,
Here is a scenario am stuck with-->
Employee has been terminated effective 28th April 2014 after the payroll run.
We are deducting (28-30th) 3 days salary( say 500 USD)
He is getting sm amount say USD1000 as business trip allowance
After the Full and final calculation he is to pay to the company USD 400 which the employee has paid in cash.
How should be pass this entry to finance from HR?
Thanks,
PoonamHi Poonam, If Employee has paid cash. Here are your option. 1. Send that money treasury department 2. Do you have any deduction wage type? Use that in infotype 0014 and re-run offcyle for him when was active. 3. Perform GL account posting. 4. FI Business will get this as a deduction in balance sheet account but they will adjust this from the cash money account which got from that employee. Regards, Arpit
-
Movies i bought from the itunes store and they wont sync to my ipod
I had bought an ipod for my daughters birthday n i had purchased several movies from the itunes store and they downloaded n they show up in my library n wheni check them to sync to her ipod....it shows a pop up block that says that it cannot be copied to this ipod cause it is not supportrd by this ipod. my baby is really wanting to use it n I downloaded the itunes 10 & updated her ipod software to 4.3.3 i think that i did all the necessary updated and downloads now what do i do...i've been on this comp eversince 11:00am this morning and it is still now 1:29am....i dont know....if anyone has any suggestions..they r welcomed
If your country's iTunes Store allows you to redownload purchased tracks, I'd delete your current copy of the track and try redownloading a fresh one. See the following document for instructions:
Downloading past purchases from the App Store, iBookstore, and iTunes Store
Otherwise, I'd report the problem to the iTunes Store.
Log in to the Store. Click on "Account" in your Quick Links. When you're in your Account information screen, go down to Purchase History and click "See all".
Find the item that is not playing properly. If you can't see "Report a Problem" next to the item, click the "Report a problem" button. Now click the "Report a Problem" link next to the item. -
After installing Mountain Lion, I tried to scan from my Canon MX870 and received the message: "MP Navigator EX quit unexpectedly. Click Reopen to open the application again. A report will be sent to Apple," This problem happened right after I installed Mountain Lion. I then downloaded Canon's upgraded software and drivers for the MX 870 and the problem was resolved. Now one month later, the problem has returned.
rjliii wrote:
Solved problem with original Canon software. When I downloaded Canon software upgraded for OS X 10.8, I got all by Navigator Ex. Noticed that on Canon's site, the upgraded version is 3.1; my app was 2.1. Upgraded to 3.1 for Nav. Ex, and it works.
You should still use Image Capture IMHO. If it was my gear, that's what I would do. No need to worry about software upgrades. -
My serial number for Logic Studio doesn't work. I used one from a different box and it worked. How can I get a new number?
http://support.apple.com/kb/TS2005
http://support.apple.com/kb/HT1861
https://ssl.apple.com/support/proapps/serialnumbers/ -
What is involved in removing an image from a PDF document and inserting a new one?
Our form producing process is very typical:
(1) Start with a TIFF image, create a fresh PDF document.
(2) By adding items such as links and interactive fields, convert the read-only document into an interactive form.
Step (2) may take a lot of work, but fortunately when modifications are needed, it is always possible to edit the individual items. No need to redo the whole form from scratch.
There are some cases, however, in which we have invested a substantial amount of work in Step (2), but we need to modify the underlying image, removing it and replacing it with a new one. We obviously don't want to destroy all the work done in (2).
I envision the procedure as taking a rug from underneath a person and putting a new one.
What is involved in doing that? Can that be done at the JavaScript level? Are there commercial packages that can do that? Is the Acrobart SDK required?
-RamonDocument->Replace Pages
Been in Acrobat since at least version 5. -
I restored my ipod from a previous backup and lost my photos. The funny thing is, the photo app says that I still have 200 something photos I just can't view them. My iPod says: Unlock your iPod to view your photos.-What does this mean? How can I fix it?
After you restore from backup, you MUST sync to restore your iTunes content. No iTunes content is included in the iPhone backup. Your apps should be in your iTunes library, just sync them back to your phone. If for some reason your apps are not in your library, you can re-download them for free:
http://support.apple.com/kb/ht2519 -
That is just the most recent problem. Other problems are the screen freezes all the time, and it won't scroll or do anything. Another is my keyboard lags as I type. another problem, is with some of my apps are constantly crashing. And It is not the apps itself per se, because my friends can be using the same app, and they are fine. Another would be emails not pushing. I will have some emails that show up, some will say I have new emails, but open to check and nothing there. Then other times i will have like 17 emails all show up at once, with some being sent days before. Another problem is my Wifi turns itself off all the time. Even when I am sitting less than 10 feet away from the router. And When I add new contacts, they are visible for a few days, then all the sudden they are nowhere to be found. Sometimes it will at least save the number in my contacts, and no name or other info. And other times it doesn't save anything. These are just a few of the many problems.
Because I got this phone shortly after the new IOS7 update, I thought since I had read about problems others were having after updating, may have been the reason I was having some initial problems. But they have only grown to more problems, and not getting better.
Has anyone else had these same problems? Do I just have a bad phone? If you have had any of these problems, were you able to get a fix and how? Any help would be greatly appreciated.
ThanksI have taken it back to the Apple store genius bar, but they say they don't see anything wrong. Well unless you use it all day and experience the problems when they happen, you wont see anything wrong. But there are lots wrong with it. But this would be the same store as I purchased the phone. And they backed up my old Iphone 4, but were not able to get anything to load back onto my new phone. So, I lost pretty much everything. But over time, some of my contacts have started showing up, although i am still missing over 800 of them.
-
I have to manually close the extra windows and restore the tabs from the previous session, and reopen the sidebar. In disgust I uninstalled Firefox 4 and reinstalled 3.6. Everything works fine in 3.6. Looks to me like Firefox 4 has many major bugs and is not yet ready for prime time. I'll stay with 3.6 for now.
This can be a problem with the files [http://kb.mozillazine.org/sessionstore.js sessionstore.js] and sessionstore.bak in the [http://kb.mozillazine.org/Profile_folder_-_Firefox Profile Folder]
Delete [http://kb.mozillazine.org/sessionstore.js sessionstore.js] and sessionstore.bak in the [http://kb.mozillazine.org/Profile_folder_-_Firefox Profile Folder]
* Help > Troubleshooting Information > Profile Directory: Open Containing Folder
If you see files sessionstore-##.js with a number in the left part of the name like sessionstore-1.js then delete those as well.<br />
You will have to redo App Tabs and Tab Groups after deleting sessionstore.js.
See:
* http://kb.mozillazine.org/Session_Restore -
I have a VI and an attched .txt data file. Now I want to read the data from the .txt file and display it as an array in the front panel. But the result is not right. Any help?
Attachments:
try2.txt 2 KB
read_array.vi 21 KBThe problem is in the delimiters in your text file. By default, Read From Spreadsheet File.vi expects a tab delimited file. You can specify a delimiter (like a space), but Read From Spreadsheet File.vi has a problem with repeated delimiters: if you specify a single space as a delimiter and Read From Spreadsheet File.vi finds two spaces back-to-back, it stops reading that line. Your file (as I got it from your earlier post) is delimited by 4 spaces.
Here are some of your choices to fix your problem.
1. Change the source file to a tab delimited file. Your VI will then run as is.
2. Change the source file to be delimited by a single space (rather than 4), then wire a string constant containing one space to the delimiter input of Read From Spreadsheet File.vi.
3. Wire a string constant containing 4 spaces to the delimiter input of Read From Spreadsheet File.vi. Then your text file will run as is.
Depending on where your text file comes from (see more comments below), I'd vote for choice 1: a tab delimited text file. It's the most common text output of spreadsheet programs.
Comments for choices 1 and 2: Where does the text file come from? Is it automatically generated or manually generated? Will it be generated multiple times or just once? If it's manually generated or generated just once, you can use any text editor to change 4 spaces to a tab or to a single space. Note: if you want to change it to a tab delimited file, you can't enter a tab directly into a box in the search & replace dialog of many programs like notepad, but you can do a cut and paste. Before you start your search and replace (just in the text window of the editor), press tab. A tab character will be entered. Press Shift-LeftArrow (not Backspace) to highlight the tab character. Press Ctrl-X to cut the tab character. Start your search and replace (Ctrl-H in notepad in Windows 2000). Click into the Find What box. Enter four spaces. Click into the Replace With box. Press Ctrl-V to paste the tab character. And another thing: older versions of notepad don't have search and replace. Use any editor or word processor that does. -
How to capture an image from my usb camera and display on my front panel
How to capture an image from my usb camera and display on my front panel
Install NI Vision Acquisition Software and NI IMAQ for USB and open an example.
Christian -
Using ale u can send from sap to sap and sap to non sap systems
hi,
using ale u can send from sap to sap and sap to non sap systems,
then what is diff b/w ALE and EDIHello KALYAN KUMAR,
Application Link Enabling (ALE)
1.You distribute data using ALE if you want to communicate from one system to one or more other (mostly internal) systems.
2.ALE transfers data in IDoc format and uses the methods of tRFC for data transfer.
3.ALE enables the integration of business processes across several SAP or non-SAP systems.
Electronic Data Interchange (EDI)
1.You use EDI if you want to exchange business application documents with an (external) partner system (for example, a customer or vendor).
2. The SAP system sends EDI messages in IDoc format to an EDI subsystem, where they are converted to a universal EDI standard (UN/EDIFACT or ANSI/X12).
3. This enables communication with non-SAP systems.
By definition, two partners are involved in the process in an EDI application scenario: The sender and the recipient of an EDI message
I hope u understands the difference:) -
I have just upgraded from CS 6 (Dreamweaver) and now when I click on a picture on a web page in Dreamweaver it doesn't go to the folder where the photo is stored anymore. If this continues I'll have to go back to CS 6 as I have to put in alot of photos.
I am using dw cc and I just double click picture I want to change in dreamweaver cc and my image folder opens, select new photo and then it updates and I am good to go, I am using a mac
-
I delete some emails ,there are moved to trash . I delete them from trash folder too and they still appear in a folder called 'all messages". I repeat the same actions and after a while they appear again!what should i do to delete them permanently??
If you are using Apple's Mail app 6.5 is the latest version irrespective of what a previous poster says. It does sound though that you are using a gmail account online via a web browser. Please confirm and fill in missing information.
-
How to upload data from excel to SAP and options to be used
How to upload data from excel to SAP and options to be used
thank you,
Regards,
Jagrut Bharatkumar shuklaHi Jagrut,
You can use gui_upload.
chk the sample program mentioned below.
REPORT ZFTP .
DATA: BEGIN OF I_FILE OCCURS 0,
DATA(2000) TYPE C,
END OF I_FILE.
DATA: BEGIN OF I_FILE2 OCCURS 0,
DATA(2000) TYPE C,
END OF I_FILE2.
DATA: W_COUNT TYPE I.
PARAMETERS: P_FILEN TYPE STRING,
P_FILE2 TYPE STRING,
P_NUM(4) TYPE N..
AT SELECTION-SCREEN ON VALUE-REQUEST FOR P_FILEN.
PERFORM F_FILE_GET USING P_FILEN TEXT-G01.
AT SELECTION-SCREEN ON VALUE-REQUEST FOR P_FILE2.
PERFORM F_FILE_GET USING P_FILE2 TEXT-G01.
START-OF-SELECTION.
CALL FUNCTION 'GUI_UPLOAD'
EXPORTING
filename = P_FILEN
FILETYPE = 'ASC'
HAS_FIELD_SEPARATOR = 'X'
HEADER_LENGTH = 0
READ_BY_LINE = 'X'
DAT_MODE = ' '
CODEPAGE = ' '
IGNORE_CERR = ABAP_TRUE
REPLACEMENT = '#'
CHECK_BOM = ' '
VIRUS_SCAN_PROFILE =
NO_AUTH_CHECK = ' '
IMPORTING
FILELENGTH =
HEADER =
tables
data_tab = I_FILE
IF SY-SUBRC <> 0.
MESSAGE E024(Z1).
ENDIF.
LOOP AT I_FILE.
W_COUNT = W_COUNT + 1.
IF NOT W_COUNT > P_NUM.
MOVE I_FILE TO I_FILE2.
APPEND I_FILE2.
ENDIF.
ENDLOOP.
CALL FUNCTION 'GUI_DOWNLOAD'
EXPORTING
BIN_FILESIZE =
filename = P_FILE2
FILETYPE = 'ASC'
APPEND = ' '
WRITE_FIELD_SEPARATOR = 'X'
HEADER = '00'
TRUNC_TRAILING_BLANKS = ' '
WRITE_LF = 'X'
COL_SELECT = ' '
COL_SELECT_MASK = ' '
DAT_MODE = ' '
CONFIRM_OVERWRITE = ' '
NO_AUTH_CHECK = ' '
CODEPAGE = ' '
IGNORE_CERR = ABAP_TRUE
REPLACEMENT = '#'
WRITE_BOM = ' '
TRUNC_TRAILING_BLANKS_EOL = 'X'
WK1_N_FORMAT = ' '
WK1_N_SIZE = ' '
WK1_T_FORMAT = ' '
WK1_T_SIZE = ' '
IMPORTING
FILELENGTH =
tables
data_tab = I_FILE2
FIELDNAMES =
*& Form F_FILE_GET
text
-->P_P_FILEN text
-->P_TEXT_G01 text
FORM F_FILE_GET USING L_FILENA L_TEXT.
CALL FUNCTION 'WS_FILENAME_GET'
EXPORTING
DEF_FILENAME = ' '
DEF_PATH = ' '
MASK = ',.,*.TXT.'
MODE = 'O'
TITLE = L_TEXT
IMPORTING
FILENAME = L_FILENA
rc =
EXCEPTIONS
INV_WINSYS = 1
NO_BATCH = 2
SELECTION_CANCEL = 3
SELECTION_ERROR = 4
OTHERS = 5
IF SY-SUBRC <> 0.
MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
ENDIF.
Reward if helpful.
Regards,
Harini.S
Maybe you are looking for
-
I have often sent pdf or other files with adobe by email with no problem. this file it said was too big so I'd have to upgrade to send it. so I upgraded it. I followed all the instructions, email, etc, etc, and its' ready to go but there is no SEN
-
Issue with embedding and usage of worklist TF in ADF app
In our application, we have embedded the worklist TF from "adflibTasklistTaskflow.jar" in our jspx page. Below is the page def binding for the TF <taskFlow id="taskListtaskflowdefinition1" taskFlowId="/WEB-INF/taskList-task-flow-definition.xml#taskLi
-
IE mysteriously not running Flash?
I'm experiencing an odd issue related to Adobe Flash Player. I haven't changed anything on my system that I am aware of that would have caused this either. Here's the story: I've been hapily using Adobe Captivate to publish courses. When I go to d
-
Missing some entries in trasaction OKB9 after upgrade to ECC 6.0
We're missing some entries in transaction OKB9 after the upgrade to ECC 6.0. Pariculary, a significant number of records in table TKA3C were not copied over to ECC 6.0. Have anyone experience this same problem as well. We're at the early stage of uni
-
Change Color of Disable Tab in JTabbedPane
Hello Friends, I have one JTabbedPane in my Application. In that one Tab is Disable. I want to change default Background and Foreground color of that tab. Can u help me... Thanks in Advance, Nishith Shah.