Answers showing differnt number of results than expected
Hello everyone!
I have two fact tables (Bookings, Opportunity) and three dimension (Time, Geography, Product) in my schema. Each of the dimension connects to both the dimensions. I am trying to compare Bookings vs Opportunity. Now, when I select the criteria as Year, Quarter, Month, Booking value, Opportunity value I should be receiving 48 rows (I have 4 yrs of data so 4 * 12 months) but I am receiving only 12 rows for 2006 year only. I have no filters. When I check my log as pasted below, the query actually is fetching 48 records from the database but returning only 12 to the client.
Can anyone throw some light on this issue please.
Thanks,
D
+++Administrator:2a0000:2a0009:----2010/01/19 11:49:39
-------------------- Rows 48, bytes 1920 retrieved from database query id: <<2134>>
+++Administrator:2a0000:2a0009:----2010/01/19 11:49:39
-------------------- Physical query response time 0 (seconds), id <<2134>>
+++Administrator:2a0000:2a0009:----2010/01/19 11:49:39
-------------------- Physical Query Summary Stats: Number of physical queries 2, Cumulative time 0, DB-connect time 0 (seconds)
+++Administrator:2a0000:2a0009:----2010/01/19 11:49:39
-------------------- Rows returned to Client 12
+++Administrator:2a0000:2a0009:----2010/01/19 11:49:39
-------------------- Logical Query Summary Stats: Elapsed time 0, Response time 0, Compilation time 0 (seconds)
Hi Dan,
Yeah, I do see something wrong. Or at least I think I do.
How do you have your hierarchy defined in your TIME_DIMENSION?
Is it like this:
<B>Level - Key</B>
Total - N/A
Year - Year
Quarter - Quarter (quarter field as seen in report below)
Month - Month (month field as seen in report below)
Is the above correct? If so, I see a little bug. You have to keep in mind that when you choose a Key for a given level, it must have ONLY one parent.
So if you use quarter as the key for the level under year, your instantly going to run into problems. For example, if your in quarter 4, what's your parent going to be? 2010? 2009? 2008? The numbers 1, 2, 3 and 4 repeat each year and are not good for level key. Instead, use something like "2010 Q1" or "Q42009" as a level key. That will always have only one parent. The exact same thing can be said for your month key in your time dimension. You need to do something like "2010 Jan" or "2009 01".
Give that a shot and see if it fixes your problems.
Best regards,
-Joe
Similar Messages
-
Hi!
With the below shown "SELECT-QUERY" I get
more results than expected.
What can the reason be for that ?
I get 72 entries instead of 12 and lines multiple.
When go via se16 and type in the materialnumber
I get shown only 12 entries out of all below
listed tables.
Regards
Ilhan
SELECT a~matnr
a~herkl a~herkr
b~exprf b~valid
c~stawn c~valid
c~prrfm c~peinh
d~prwrk d~peinh
INTO CORRESPONDING FIELDS OF TABLE ldm_all
FROM LDM_LF AS a
INNER JOIN LDM_VL_LFKD AS b ON
a~matnr = b~matnr
INNER JOIN LDM_VL_MAT AS c ON
a~matnr = c~matnr
INNER JOIN LDM_VL_KD AS d ON
a~matnr = d~matnr
WHERE a~matnr IN mat AND
b~valid IN dat.SELECT a~matnr a~kunnr
a~herkl a~herkr
b~exprf b~valid
INTO CORRESPONDING FIELDS OF TABLE ldm_all1
FROM LDM_LF AS a
INNER JOIN LDM_VL_LFKD AS b ON
a~matnr = b~matnr
a~wlfnr = b~wlfnr
WHERE a~matnr IN mat AND
b~valid IN dat.
If sy-subrc = 0.
SELECT c~stawn c~valid
c~prrfm c~peinh
d~prwrk d~peinh
INTO CORRESPONDING FIELDS OF TABLE ldm_all2
FROM LDM_VL_MAT AS c
INNER JOIN LDM_VL_KD AS d ON
c~matnr = d~matnr
c~LDMQL = d~LDMQL
c~valid = d~valid
FOR ALL ENTRIES IN i_ldm_all2
WHEREc~matnr = i_ldm_all2-matnr AND
c~kunnr = i_ldm_all2-kunnr AND
c~LDMQL = i_ldm_all2-ldmql AND
c~valid = i_ldm_all2-valid.
ENDIF.
Hope this solves ur query. -
How to show maximum number of results is 100 in Customsearch help exit
Hi,
we have created one custome search help with FM Exist when clicking on f4 on field it'showing with result 5000 entries but i want to show only 100 initially when we open f4.
so how we can restric maximum number of results is 100.plz guide me.
divya.Hi,
we have created one custome search help with FM Exist when clicking on f4 on field it'showing with result 5000 entries but i want to show only 100 initially when we open f4.
so how we can restric maximum number of results is 100.plz guide me.
divya. -
Java matcher - one less result than expected
Hi all,
I have a question about the Java matcher, which may have a very simple answer, but after a while trying to find the answer (through debugging and googling), I have come up with no solution.
Basically, I am trying to parse through CSV files and find text matching a user-defined String that is entered. I have written a small CSV file and have written many instances of one word (for instance "java"). However when I use the matcher.find() method upon the content of the CSV file, it always finds one less match than are actually in the file! (e.g. if there are 6 instances of the word 'java', the matcher finds 5). I have printed the contents of the CSV file to the screen and the whole file is correctly displayed, so it must be something to do with the way the matcher works. Here is my code, although it is only basic at the moment:
Pattern pattern = Pattern.compile("java", Pattern.CASE_INSENSITIVE);
Matcher matcher = pattern.matcher(pageContents); // this is a String containing the contents of the CSV file.
ArrayList<String> allMatches = new ArrayList<String>();
if (!matcher.find()) {
System.err.println("\nNo Matching Data Could Be Found In This Text File.\n");
System.exit(0);
while (matcher.find()) {
String individualMatch = matcher.group().trim();
System.out.println(individualMatch);
allMatches.add(individualMatch);
return allMatches;So basically I am returning an ArrayList of Strings which contains all matches of the word "java" (just as an example).
Any help would be greatly appreciated!
Thanks,
Jonif (!matcher.find()) { // This line matches the first one, and throws it away
System.err.println("\nNo Matching Data Could Be Found In This Text File.\n");
System.exit(0);
while (matcher.find()) { // .. since you call find here again.
String individualMatch = matcher.group().trim();
System.out.println(individualMatch);
allMatches.add(individualMatch);
return allMatches;Kaj -
Number of Records Loaded for 2LIS_02_HDR much higher than expected
Hi, I just did a setup for 2LIS_02_HDR and in table EKKO has 1.2 million and in bw it looks like it is loading well over 6 million right now. Is this because the HDR collects up detail information for header aggregation? Even with that I don't expect 6 million records.
Any ideas? I'm fairly certain I put in all the right parameters in my setup load! Any way to check?
thanks!>
Kenneth Murray wrote:
> Hi, I just did a setup for 2LIS_02_HDR and in table EKKO has 1.2 million and in bw it looks like it is loading well over 6 million right now. Is this because the HDR collects up detail information for header aggregation? Even with that I don't expect 6 million records.
>
> Any ideas? I'm fairly certain I put in all the right parameters in my setup load! Any way to check?
>
> thanks!
Hi,
please check following :
1. setup most not be filled repeatdly.... in case if its filled multiple times it wil give u higher no. of records than expected. Kindly check in number of entries in table "MC11VA0HDRSETUP".
2. If records are higher than expected than please delete data for application 02 using tcode LBWG and refill it.
Thanks
Dipika -
Vimeo Searches in ATV2 show less results than in osx
Hi all,
I live in Argentina, have an ATV2 and MacBook Pro.
Searches in vimeo through opera show extesively more results than searches through ATV2.
Does anyone know how to solve this?
ThanksHi Will,
Hmmm... That's a tough question without seeing the results of FMAF, at least. Sometimes, something goes wrong with the reassignment (if you did any) or the carry-forward. Sometimes, it's somehow connected to internal process which differs from SAP standard (again, if you have any). Could be really several reasons, but most of them are resulted from enhanced solutions in FM.
Regards,
Eli -
The result set I get for a search now only shows the company name and address, if I want the telephone number of the company in the result set, I have to click on the link to go the site information to get the number. I want the company name, address and phone number to show up in the result set without having to click on each hyperlink to get the telephone number...
???
See my profile at the left for information you are missing.
Who, when, why, how, how much, what is the URL -
Missing large number of results through Bing Search API (web results only)
When making multiple calls to the Bing Web Search API (with a different $skip parameter), many queries I try seem to be missing many of the result I'd expect.
For example, searching for the string 'obama' on bing.com shows 107,000,000 results available.
When I search using the web search API using:
https://api.datamarket.azure.com/Bing/SearchWeb/v1/Web?Query=%27obama%27&%24format=json
I get 50 results, and the '__next' parameter is given as 'https://api.datamarket.azure.com/Data.ashx/Bing/SearchWeb/v1/Web?Query='obama'&$skip=50'
If I repeat this several times, eventually I get a response with less than 50 results, and no '__next' parameter, indicating there are no more results.
However, I always get far fewer than 1000 results (I'd expect there to be at least 1000). Trying to get 1000 results (by making a request and querying against the '__next' URL), I get different numbers of results each time:
attempt 1: 355 results
attempt 2: 441 results
attempt 3: 358 results
attempt 4: 692 results
attempt 5: 692 results
attempt 6: 694 results
attempt 7: 659 results
Querying for this should always return at least 1000 results, since 'obama' has 107,000,000 results listed when searching from bing.com
Any idea what's going on here?Sorry to respond to this old thread, but the problem persists. It exists in both the web UI and the API. The initial result page (on the web) or result object (in the API) report millions of search results, however after clicking through a number of result
pages (on the web) the total number is reduced to a few hundred. Similarly, in the API, setting the '$skip' parameter above this number does not return results. In the Obama case the first page shows 18.2 million results (http://www.bing.com/search?q=obama&go=Submit+Query&qs=bs&form=QBRE)
but from page 35 and over only 529 results are reported (e.g., http://www.bing.com/search?q=obama&qs=n&pq=obama&sc=8-3&sp=-1&sk=&ghc=1&cvid=92729d6076e24a37a9e6ee099da99a4a&first=527&FORM=PERE7). Therefore the above problem
does not seem to be related to the difference between the API and the web UI, but rather that Bing does not provide any results from a certain point (presumably because nobody is interested in them anyway). However, for data mining/web content analysis it
is desired to get all results, even uninteresting ones. Is this behaviour documented somewhere, or can it be influenced? -
How to get total number of result count for particular key on cluster
Hi-
My application requirement is client side require only limited number of data for 'Search Key' form total records found in cluster. Also i need 'total number of result count' for that key present on the custer.
To get subset of record i'm using IndexAwarefilter and returning only limited set each individual node. though i get total number of records present on the individual node, it is not possible to return this count to client form IndexAwarefilter (filter return only Binary set).
Is there anyway i can get this number (total result size) on client side without returning whole chunk of data?
Thanks in advance.
Prashantuser11100190 wrote:
Hi,
Thanks for suggesting a soultion, it works well.
But apart from the count (cardinality), the client also expects the actual results. In this case, it seems that the filter will be executed twice (once for counting, then once again for generating actual resultset)
Actually, we need to perform the paging. In order to achieve paging in efficient manner we need that filter returns only the PAGESIZE records and it also returns the total 'count' that meets the criteria.
If you want to do paging, you can use the LimitFilter class.
If you want to have paging AND total number of results, then at the moment you have to use two passes if you want to use out-of-the-box features because LimitFilter does not return the total number of results (which by the way may change between two page retrieval).
What we currently do is, the filter puts the total count in a static variable and but returns only the first N records. The aggregator then clubs these info into a single list and returns to the client. (The List returned by aggregator contains a special entry representing the count).
This is not really a good idea because if you have more than one user doing this operation then you will have problems storing more than one values in a single static variable and you used a cache service with a thread-pool (thread-count set to larger than one).
We assume that the aggregator will execute immediately after the filter on the same node, this way aggregator will always read the count set by the filter.
You can't assume this if you have multiple client threads doing the same kind of filtering operation and you have a thread-pool configured for the cache service.
Please tell us if our approach will always work, and whether it will be efficient as compared to using Count class which requires executing filter twice.
No it won't if you used a thread-pool. Also, it might happen that Coherence will execute the filtering and the aggregation from the same client thread multiple times on the same node if some partitions were newly moved to the node which already executed the filtering+aggregation once. I don't know anything which would even prevent this being executed on a separate thread concurrently.
The following solution may be working, but I can't fully recommend it as it may leak memory depending on how exactly the filtering and aggregation is implemented (if it is possible that a filtering pass is done but the corresponding aggregation is not executed on the node because of some partitions moved away).
At sending the cache.aggregate(Filter, EntryAggregator) call you should specify a unique key for each such filtering operation to both the filter and the aggregator.
On the storage node you should have a static HashMap.
The filter should do the following two steps while being synchronized on the HashMap.
1. Ensure that a ConcurrentLinkedQueue object exists in a HashMap keyed by that unique key, and
2. Enqueue the total number count you want to pass to the aggregator into that queue.
The parallel aggregator should do the following two steps while being synchronized on the HashMap.
1. Dequeue a single element from the queue, and return it as a partial total count.
2. If the queue is now empty, then remove it from the HashMap.
The parallel aggregator should return the popped number as a partial total count as part of the partial result.
The client side of the parallel aware aggregator should sum the total counts in the partial result.
Since the enqueueing and dequeueing may be interleaved from multiple threads, it may be possible that the partial total count returned in a result does not correspond to the data in the partial result, so you should not base anything on that assumption.
Once again, that approach may leak memory based on how Coherence is internally implemented, so I can't recommend this approach but it may work.
Another thought is that since returning entire cached values from an aggregation is more expensive than filtering (you have to deserialize and reserialize objects), you may still be better off by running a separate count and filter pass from the client, since for that you may not need to deserialize entries at all, so the cost on the server may be lower.
Best regards,
Robert -
How do you get the integer of a number with more than 10 digits
I can't seem to be able to get the integer of a number with more than 10 digits.
ex:
integer(12345678901.3) returns -539222987 when it should really return 12345678901
Thanks for the help
(I'm on director 11 at the moment)You can write a Parent script to represent Big Integers. I wrote some code to get you started. It consist of two classes - "BigInt" and "Digit". At this point you can only add two "BigInts" and print out the value with a toString() function. Note that you pass a String to the "BigInt" constructor.
In the message window you could enter something like:
x = script("BigInt").new("999999999999")
y = script("BigInt").new("100000000000000000004")
z = x.add(y)
put z.toString()
And the output window will show:
-- "100000001000000000003"
Here are the two Parent scripts / Classes
-- Digit
property val
property next
on new me, anInt
val = anInt
next = 0
return me
end new
-- BigInt
property Num
property StringRep
on new me, aString
Num = script("Digit").new(Integer(aString.char[aString.length]))
curNum = Num
repeat with pos = aString.length - 1 down to 1
curNum.next = script("Digit").new(Integer(aString.char[pos]))
curNum = curNum.next
end repeat
return me
end new
on add me , Num2
curNum = Num
curNum2 = Num2.Num
result = curNum.val + curNum2.val
if result > 9 then
carry = 1
else
carry = 0
end if
result = result mod 10
sum = script("Digit").new(result)
curSum = sum
curNum = curNum.next
curNum2 = curNum2.next
repeat while curNum.ObjectP AND curNum2.ObjectP
result = curNum.val + curNum2.val + carry
if result > 9 then
carry = 1
else
carry = 0
end if
result = result mod 10
curSum.next = script("Digit").new(result)
curSum = curSum.next
curNum = curNum.next
curNum2 = curNum2.next
end repeat
repeat while curNum.ObjectP
result = curNum.val + carry
if result > 9 then
carry = 1
else
carry = 0
end if
result = result mod 10
curSum.next = script("Digit").new(result)
curSum = curSum.next
curNum = curNum.next
end repeat
repeat while curNum2.ObjectP
result = curNum2.val + carry
if result > 9 then
carry = 1
else
carry = 0
end if
result = result mod 10
curSum.next = script("Digit").new(result)
curSum = curSum.next
curNum2 = curNum2.next
end repeat
StringRep = ""
me.makeString(sum)
return me.script.new(StringRep)
end add
on toString me
StringRep = ""
me.makeString(Num)
return StringRep
end toString
on makeString me, digit
if not digit then
return
end if
me.makeString(digit.next)
put String(digit.val) after StringRep
end makeString -
I have my preferences set so that New Finder windows show Macintosh HD. So when I open a Finder window, five folders are shown: Applications, Library, System, User Information, and User. As an example of the subject of my question, I opened a Finder window and typed "hp" in the search field. Four results were displayed: HP ePrint.app, two other apps that open the printing queues of HP printers, and an HTML document of bookmarks with two bookmarks containing "hp" in their names. My goal of the search* was to find a folder named "hp", of which there are two that I know of on my computer. Their locations are: 'Macintosh HD/Library/Printers' and 'Macintosh HD/Library/Application Support'—neither folder was found when searched for in "This Mac" nor when searched for in "Macintosh HD". When I searched for "hp" in the Library folder, 36 results were displayed, including the two folders named "hp". Above those 36 items, it clearly indicated that my search was conducted in the Library folder, and that I was able to click "This Mac" to search my whole computer instead. Clicking "This Mac" resulted in the same four items that were found when I searched for "hp" immediately after opening the Finder window to be displayed again. In my mind, clicking "This Mac" should at least keep the 36 items found in my Library folder to remain displayed. My reason for thinking this is because the Library folder is contained in "This Mac", isn't it? The same logic applies to Macintosh HD also; why doesn't searching there return at least the same 36 results? This phenomenon of the contained location returning more search results than the location which contains it frustrates me. When I search for something, I have to guess if it's in Library or System (if it's in one of the other folders, I'm always certain of which to search). I know that doesn't seem like a big deal, it just doesn't make sense to me why I can't find things by searching in "This Mac" or Macintosh HD. Until I got this MacBook (15" Pro Retina mid 2012, 2.6/16/256) , I was a lifelong Windows user. I love my MacBook, but this search idiosyncrasy is the only thing about it that seems inferior to its Windows counterpart. Searching for something in Windows is easier to me because locations behave hierarchically. I still like my MBP way better than any other computer that I've ever owned before, I just wish Apple would change this one attribute. If anyone knows how to make the Finder search behave completely hierarchically (when the containing location returns at least the same search results as the location it contains), please let me know. Thank you.
*The "hp" folder search that I conducted was done only as an example of the issue that I discussed here. I knew where the folders were, thus, it was easier for me to explain the problem that was posed in my question.Start with http://www.pinkmutant.com/articles/Leopard/leospot.html and http://www.thexlab.com/faqs/stopspotlightindex.html, then my mod to Finder's Find at http://www.macosxhints.com/article.php?story=20080229204517495 for what you can change so you can find stuff excluded by the default structure.
-
There is an invalid number of result bindings returned for the ResultSetType
SSIS SQL Task: Single Row Result Set
Code was updated to test for data in target: If Exists Do Merge ELSE Do Insert
Previously was just a merge that Output $Action to @ChangeSum and then @ChangeSum queried for updates and inserts
That all worked but after injecting new code I receive the error There is an invalid number of result bindings returned for the ResultSetType that I don't know what it means or how to troubleshoot.
Inject New Code:
IF OBJECT_ID('tempdb..##TblTemp', 'U') IS NOT NULL
DROP TABLE ##TblTemp
Declare @sql nvarchar(max);
set @sql = @TestForData
exec (@sql);
IF EXISTS (select top 1 * from ##TblTemp)
Begin
--Beginning of existing code
begin transaction;
begin try
declare @MergeQuery varchar(max)
set @MergeQuery = convert(varchar(max), @MergeQuery1) + convert(varchar(max), @MergeQuery2)
+ ' ' + convert(varchar(max), @MergeQuery3)
+ ' ' + convert(varchar(max), @MergeQuery4)
+ ' ' + convert(varchar(max), @MergeQuery5);
exec(@MergeQuery);
end try
begin catch
declare
@Message VARCHAR(4000)
,@Severity INT
,@State INT;
select
@Message = ERROR_MESSAGE()
,@Severity = ERROR_SEVERITY()
,@State = ERROR_STATE();
if @@TRANCOUNT > 0
rollback transaction;
raiserror(@Message, @Severity, @State);
end catch;
if @@trancount > 0
begin
commit transaction;
end
--End of existing code
End
else
Begin
declare @InsertQuery nvarchar(max)
set @InsertQuery = convert(varchar(max),@InsertQuery1)
exec (@InsertQuery);
end
Drop Table ##TblTemp
=================================
SSIS Variable @InsertQuery1:
This variable is executed in SQL Task and the last 3 lines I expect a single row of Insert & Update counts to be returned.
declare @ChangeSum table(change varchar(25));
declare @Inserted int = 0;
declare @Updated int = 0;
While 1 = 1
Begin
INSERT INTO [R_Paid].[BusCodeF454x93]
OUTPUT Inserted.Sta3n INTO @ChangeSum
SELECT TOP 1000 s.*
FROM [R_Stage].[BusCodeF454x93] s
WHERE NOT EXISTS
SELECT 1
FROM [R_Paid].[BusCodeF454x93]
WHERE STA3N=S.STA3N and [BusCodeF454x93IEN] = s.[BusCodeF454x93IEN]
IF @@ROWCOUNT = 0 BREAK
END
set @Inserted = (select count(*) from @ChangeSum );
set @Updated = 0;
select @Inserted as Inserted, @Updated as Updated;"SELECT " + (DT_WSTR,50)@[User::TargetExists] + " = CASE WHEN COUNT(*) > 0 THEN 1 ELSE 0 END
FROM " + (DT_WSTR, 100) @[User::DataDestinationTable]
must do the trick
The T-SQL merge allows both inserts and updates:
MERGE Target AS T
USING Source AS S
ON (T.EmployeeID = S.EmployeeID)
WHEN NOT MATCHED BY TARGET AND S.EmployeeName LIKE 'S%'
THEN INSERT(EmployeeID, EmployeeName) VALUES(S.EmployeeID, S.EmployeeName)
WHEN MATCHED
THEN UPDATE SET T.EmployeeName = S.EmployeeName
WHEN NOT MATCHED BY SOURCE AND T.EmployeeName LIKE 'S%'
THEN DELETE
OUTPUT $action, inserted.*, deleted.*;
ROLLBACK TRAN;
GO
Arthur My Blog -
Finder issues and Get Info refusing to show the number of files on items on the main hard drive.
I am having finder issues. Mostly on the main hard drive. It takes ages to find things and I get the spinning wheel every time I open a folder.
So I moved all of my files to a external drive. When I had finished transfering I hit get info on the files on the external drive and on the same folder on the main drive. To ensure that it has copied over all the files. Because it was acting up and not copying all the files.
Get Info refuses to show the number of files within the folders on the main hard drive. It hasppily tells me everything on any of the external drives.
I have reset, the imac. I have re indexed 3 times. I have deleted the finder plist files. I have reset finder using terminal commands. I have moved nearly everything off the main hard drive. But nothing is working.
Can anyone offer any suggestions as to what could be causing my finder and get info issues.
Any help wpuld be appreciated.
Running Mountain Lion on a late 2009 ImacSome of your user files (not system files) have incorrect permissions or are locked. This procedure will unlock those files and reset their ownership, permissions, and access controls to the default. If you've intentionally set special values for those attributes, they will be reverted. In that case, either stop here, or be prepared to recreate the settings if necessary. Do so only after verifying that those settings didn't cause the problem. If none of this is meaningful to you, you don't need to worry about it, but you do need to follow the instructions below.
Back up all data.
Step 1
If you have more than one user, and the one in question is not an administrator, then go to Step 2.
Enter the following command in the Terminal window in the same way as before (triple-click, copy, and paste):
sudo find ~ $TMPDIR.. -exec chflags nouchg,nouappnd,noschg,nosappnd {} + -exec chown $UID {} + -exec chmod +rw {} + -exec chmod -N {} + -type d -exec chmod +x {} + 2>&-
This time you'll be prompted for your login password, which won't be displayed when you type it. Type carefully and then press return. You may get a one-time warning to be careful. If you don’t have a login password, you’ll need to set one before you can run the command. If you see a message that your username "is not in the sudoers file," then you're not logged in as an administrator.
The command may take several minutes to run, depending on how many files you have. Wait for a new line ending in a dollar sign ($) to appear, then quit Terminal.
Step 2 (optional)
Take this step only if you have trouble with Step 1, if you prefer not to take it, or if it doesn't solve the problem.
Start up in Recovery mode. When the OS X Utilities screen appears, select
Utilities ▹ Terminal
from the menu bar. A Terminal window will open. In that window, type this:
res
Press the tab key. The partial command you typed will automatically be completed to this:
resetpassword
Press return. A Reset Password window will open. You’re not going to reset a password.
Select your startup volume ("Macintosh HD," unless you gave it a different name) if not already selected.
Select your username from the menu labeled Select the user account if not already selected.
Under Reset Home Directory Permissions and ACLs, click the Reset button
Select
▹ Restart
from the menu bar. -
How to get maximum number of results using content presenter taskflow
Hello Friends,
I am using 11.1.1.6,
Below is the query is getting executed while content presenter taskflow get executed, Though I have more than 100 results in UCM, I am always getting only 25. Is there anywhere I can configure to fetch maximum number of results ? Though I set maxResults = 200, It always returns 25.
SELECT * FROM ora:t:IDC:GlobalProfile WHERE ora:p:xRegionDefinition = 'NEWS_REG_DEF' AND ora:p:xArchiveFlag='Yes' and ora:p:xDocumentSortDate > TIMESTAMP '2014-01-01T00:00:00.000+00:00' and ora:p:xDocumentSortDate < TIMESTAMP '2014-12-31T00:00:00.000+00:00' ORDER BY ora:p:xDocumentSortDate DESC
Page Def.xml : here the taskflow entries configured in page def xml file
<taskFlow id="doclibcontentpresenter2"
taskFlowId="/oracle/webcenter/doclib/view/jsf/taskflows/presenter/contentPresenter.xml#doclib-content-presenter"
activation="deferred"
xmlns="http://xmlns.oracle.com/adf/controller/binding"
Refresh="ifNeeded"
RefreshCondition="#{requestScope.pRefreshArchiveNewsSction='Y'}">
<parameters>
<parameter id="taskFlowInstId" value="${'myinst'}"/>
<parameter id="datasourceType" value="${'dsTypeQueryExpression'}"/>
<parameter id="datasource"
value="#{backingBeanScope.ArchiveBean.contentQuery}"/>
<parameter id="templateCategory" value="${''}"/>
<parameter id="templateView" value="${'templates.archive.list'}"/>
<parameter id="regionTemplate" value="${'false'}"/>
<parameter id="maxResults" value="200"/>
</parameters>
</taskFlow>Hi Dan,
Here is the detailed logs
searchcache/6
02.19 15:21:14.656
SearchCache
Approximately 0% of the available cache space is used.
>searchquery/7
02.19 15:23:53.642
IdcServer-14885
Query by [email protected] from CIS
>searchquery/6
02.19 15:23:53.643
IdcServer-14885
preparedQueryText: ( ((xRegionDefinition <matches> `NEWS_REG_DEF`) <and> ((xArchiveFlag <matches> `Yes`) <and> ((xDocumentSortDate>`2013-01-01 00:00:00`) <and> (xDocumentSortDate<`2013-12-31 00:00:00`)))) )
>searchquery/6
02.19 15:23:53.643
IdcServer-14885
Setting substr to other operator conv flag: '( ((xRegionDefinition <matches> `NEWS_REG_DEF`) <and> ((xArchiveFlag <matches> `Yes`) <and> ((xDocumentSortDate>`2013-01-01 00:00:00`) <and> (xDocumentSortDate<`2013-12-31 00:00:00`)))) )'
>searchqueryparse/6
02.19 15:23:53.643
IdcServer-14885
Into parse of UniversalSearchQuery for: ( ((xRegionDefinition <matches> `NEWS_REG_DEF`) <and> ((xArchiveFlag <matches> `Yes`) <and> ((xDocumentSortDate>`2013-01-01 00:00:00`) <and> (xDocumentSortDate<`2013-12-31 00:00:00`)))) )
>searchqueryparse/6
02.19 15:23:53.643
IdcServer-14885
Into parseQueryEx of UniversalSearchQueryParser for queryArr : ( ((xRegionDefinition <matches> `NEWS_REG_DEF`) <and> ((xArchiveFlag <matches> `Yes`) <and> ((xDocumentSortDate>`2013-01-01 00:00:00`) <and> (xDocumentSortDate<`2013-12-31 00:00:00`)))) )
>searchquery/6
02.19 15:23:53.643
IdcServer-14885
Parsing universal query: '( ((xRegionDefinition <matches> `NEWS_REG_DEF`) <and> ((xArchiveFlag <matches> `Yes`) <and> ((xDocumentSortDate>`2013-01-01 00:00:00`) <and> (xDocumentSortDate<`2013-12-31 00:00:00`)))) )'
>searchquery/6
02.19 15:23:53.643
IdcServer-14885
Processing callback on query value 'NEWS_REG_DEF'
>searchqueryparse/6
02.19 15:23:53.643
IdcServer-14885
Into appendClauseElement CommonSearchConfig with operator : equals value : NEWS_REG_DEF
>searchqueryparse/6
02.19 15:23:53.643
IdcServer-14885
Processing actions list size : 1 on the input value : xRegionDefinition with searchengine ORACLETEXTSEARCH
>searchqueryparse/6
02.19 15:23:53.643
IdcServer-14885
Processing action number : 0 : prefix on the input value : xRegionDefinition with searchengine ORACLETEXTSEARCH
>searchqueryparse/6
02.19 15:23:53.643
IdcServer-14885
Processing actions list size : 2 on the input value : NEWS_REG_DEF with searchengine ORACLETEXTSEARCH
>searchqueryparse/6
02.19 15:23:53.643
IdcServer-14885
Processing action number : 0 : upperCase on the input value : NEWS_REG_DEF with searchengine ORACLETEXTSEARCH
>searchqueryparse/6
02.19 15:23:53.643
IdcServer-14885
Processing action number : 1 : escape on the input value : NEWS_REG_DEF with searchengine ORACLETEXTSEARCH
>searchqueryparse/6
02.19 15:23:53.643
IdcServer-14885
Processed escape with '' resulting in value :NEWS_REG_DEF
>searchqueryparse/6
02.19 15:23:53.643
IdcServer-14885
Processed escape with _ resulting in value :NEWS_REG_DEF
>searchqueryparse/6
02.19 15:23:53.643
IdcServer-14885
Processed escape with \- resulting in value :NEWS_REG_DEF
>searchqueryparse/6
02.19 15:23:53.643
IdcServer-14885
Processed escape with \_ resulting in value :NEWS\_REG\_DEF
>searchqueryparse/6
02.19 15:23:53.643
IdcServer-14885
Processed escape with \, resulting in value :NEWS\_REG\_DEF
>searchqueryparse/6
02.19 15:23:53.643
IdcServer-14885
Into appendClauseElement CommonSearchConfig with operator : and value :
>searchquery/6
02.19 15:23:53.643
IdcServer-14885
Processing callback on query value 'Yes'
>searchqueryparse/6
02.19 15:23:53.643
IdcServer-14885
Into appendClauseElement CommonSearchConfig with operator : equals value : Yes
>searchqueryparse/6
02.19 15:23:53.643
IdcServer-14885
Processing actions list size : 1 on the input value : xArchiveFlag with searchengine ORACLETEXTSEARCH
>searchqueryparse/6
02.19 15:23:53.643
IdcServer-14885
Processing action number : 0 : prefix on the input value : xArchiveFlag with searchengine ORACLETEXTSEARCH
>searchqueryparse/6
02.19 15:23:53.643
IdcServer-14885
Processing actions list size : 2 on the input value : Yes with searchengine ORACLETEXTSEARCH
>searchqueryparse/6
02.19 15:23:53.643
IdcServer-14885
Processing action number : 0 : upperCase on the input value : Yes with searchengine ORACLETEXTSEARCH
>searchqueryparse/6
02.19 15:23:53.644
IdcServer-14885
Processing action number : 1 : escape on the input value : YES with searchengine ORACLETEXTSEARCH
>searchqueryparse/6
02.19 15:23:53.644
IdcServer-14885
Processed escape with '' resulting in value :YES
>searchqueryparse/6
02.19 15:23:53.644
IdcServer-14885
Processed escape with _ resulting in value :YES
>searchqueryparse/6
02.19 15:23:53.644
IdcServer-14885
Processed escape with \- resulting in value :YES
>searchqueryparse/6
02.19 15:23:53.644
IdcServer-14885
Processed escape with \_ resulting in value :YES
>searchqueryparse/6
02.19 15:23:53.644
IdcServer-14885
Processed escape with \, resulting in value :YES
>searchqueryparse/6
02.19 15:23:53.644
IdcServer-14885
Into appendClauseElement CommonSearchConfig with operator : and value :
>searchquery/6
02.19 15:23:53.644
IdcServer-14885
Processing callback on query value '2013-01-01 00:00:00'
>searchqueryparse/6
02.19 15:23:53.644
IdcServer-14885
Into appendClauseElement CommonSearchConfig with operator : dateGreater value : 2012/12/31 18:00:00
>searchqueryparse/6
02.19 15:23:53.644
IdcServer-14885
Into appendClauseElement CommonSearchConfig with operator : and value :
>searchquery/6
02.19 15:23:53.644
IdcServer-14885
Processing callback on query value '2013-12-31 00:00:00'
>searchqueryparse/6
02.19 15:23:53.644
IdcServer-14885
Into appendClauseElement CommonSearchConfig with operator : dateLess value : 2013/12/30 18:00:00
>searchquery/6
02.19 15:23:53.644
IdcServer-14885
Converted native query: '((( SDATA(sdxRegionDefinition LIKE 'NEWS\_REG\_DEF') ) and (( SDATA(sdxArchiveFlag LIKE 'YES') ) and (( SDATA(xDocumentSortDate > '2012/12/31 18:00:00') ) and ( SDATA(xDocumentSortDate < '2013/12/30 18:00:00') )))))'
>searchquery/7
02.19 15:23:53.644
IdcServer-14885
assigning connection
>searchquery/6
02.19 15:23:53.644
IdcServer-14885
!csMonitorActiveDbConnections,1
>searchquery/6
02.19 15:23:53.644
IdcServer-14885
Connection is added to active connections with key of '[ACTIVE] ExecuteThread: '35' for queue: 'weblogic.kernel.Default (self-tuning)''.
>searchquery/6
02.19 15:23:53.644
IdcServer-14885
query(live): (((((((((((( SDATA(sdxRegionDefinition LIKE 'NEWS\_REG\_DEF') ) and (( SDATA(sdxArchiveFlag LIKE 'YES') ) and (( SDATA(xDocumentSortDate > '2012/12/31 18:00:00') ) and ( SDATA(xDocumentSortDate < '2013/12/30 18:00:00') )))))))))))))) [1,51] sort(xDocumentSortDate DESC)
>search/6
02.19 15:23:53.688
IdcServer-14885
Start parsing drill down fields with SAX...
>search/6
02.19 15:23:53.691
IdcServer-14885
Completed parsing 1 groups.
>search/7
02.19 15:23:53.692
IdcServer-14885
ResultSetInterface results: <ctx_result_set><hitlist><hit><sdata name="DID">11489</sdata><sdata name="SDDDOCNAME">WCC_CLUSTER1-006063</sdata><score>100</score></hit><hit><sdata name="DID">16132</sdata><sdata name="SDDDOCNAME">WCC_CLUSTER1-006403</sdata><score>100</score></hit><hit><sdata name="DID">13513</sdata><sdata name="SDDDOCNAME">WCC_CLUSTER1-006591</sdata><score>100</score></hit><hit><sdata name="DID">11319</sdata><sdata name="SDDDOCNAME">WCC_CLUSTER1-006003</sdata><score>100</score></hit><hit><sdata name="DID">17043</sdata><sdata name="SDDDOCNAME">WCC_CLUSTER1004050</sdata><score>100</score></hit><hit><sdata name="DID">16477</sdata><sdata name="SDDDOCNAME">WCC_CLUSTER1-006407</sdata><score>100</score></hit><hit><sdata name="DID">16162</sdata><sdata name="SDDDOCNAME">WCC_CLUSTER1-006593</sdata><score>100</score></hit><hit><sdata name="DID">16010</sdata><sdata name="SDDDOCNAME">WCC_CLUSTER1-006399</sdata><score>100</score></hit><hit><sdata name="DID">10524</sdata><sdata name="SDDDOCNAME">WCC_CLUSTER1-005609</sdata><score>100</score></hit><hit><sdata name="DID">10777</sdata><sdata name="SDDDOCNAME">WCC_CLUSTER1-005601</sdata><score>100</score></hit><hit><sdata name="DID">10508</sdata><sdata name="SDDDOCNAME">WCC_CLUSTER1-005600</sdata><score>100</score></hit><hit><sdata name="DID">10476</sdata><sdata name="SDDDOCNAME">WCC_CLUSTER1-005585</sdata><score>100</score></hit><hit><sdata name="DID">12427</sdata><sdata name="SDDDOCNAME">WCC_CLUSTER1-006397</sdata><score>100</score></hit><hit><sdata name="DID">16333</sdata><sdata name="SDDDOCNAME">WCC_CLUSTER1-005580</sdata><score>100</score></hit><hit><sdata name="DID">17080</sdata><sdata name="SDDDOCNAME">WCC_CLUSTER1004051</sdata><score>100</score></hit><hit><sdata name="DID">15926</sdata><sdata name="SDDDOCNAME">WCC_CLUSTER1-006482</sdata><score>100</score></hit><hit><sdata name="DID">16857</sdata><sdata name="SDDDOCNAME">WCC_CLUSTER1003963</sdata><score>100</score></hit><hit><sdata name="DID">16895</sdata><sdata name="SDDDOCNAME">WCC_CLUSTER1003964</sdata><score>100</score></hit><hit><sdata name="DID">16487</sdata><sdata name="SDDDOCNAME">WCC_CLUSTER1-006481</sdata><score>100</score></hit><hit><sdata name="DID">12431</sdata><sdata name="SDDDOCNAME">WCC_CLUSTER1-006485</sdata><score>100</score></hit><hit><sdata name="DID">16813</sdata><sdata name="SDDDOCNAME">WCC_CLUSTER1003977</sdata><score>100</score></hit><hit><sdata name="DID">9569</sdata><sdata name="SDDDOCNAME">WCC_CLUSTER1-005342</sdata><score>100</score></hit><hit><sdata name="DID">16814</sdata><sdata name="SDDDOCNAME">WCC_CLUSTER1003978</sdata><score>100</score></hit><hit><sdata name="DID">17045</sdata><sdata name="SDDDOCNAME">WCC_CLUSTER1004056</sdata><score>100</score></hit><hit><sdata name="DID">12246</sdata><sdata name="SDDDOCNAME">WCC_CLUSTER1-006478</sdata><score>100</score></hit><hit><sdata name="DID">15911</sdata><sdata name="SDDDOCNAME">WCC_CLUSTER1-005652</sdata><score>100</score></hit><hit><sdata name="DID">16775</sdata><sdata name="SDDDOCNAME">WCC_CLUSTER1003999</sdata><score>100</score></hit><hit><sdata name="DID">11925</sdata><sdata name="SDDDOCNAME">VMOHSKEND05482000776</sdata><score>100</score></hit><hit><sdata name="DID">15639</sdata><sdata name="SDDDOCNAME">VMOHSKEND05482000763</sdata><score>100</score></hit><hit><sdata name="DID">16865</sdata><sdata name="SDDDOCNAME">VMOHSKEND05482000770</sdata><score>100</score></hit><hit><sdata name="DID">10100</sdata><sdata name="SDDDOCNAME">VMOHSKEND05482000741</sdata><score>100</score></hit><hit><sdata name="DID">17116</sdata><sdata name="SDDDOCNAME">WCC_CLUSTER1004054</sdata><score>100</score></hit><hit><sdata name="DID">9015</sdata><sdata name="SDDDOCNAME">VMOHSKEND05482000801</sdata><score>100</score></hit><hit><sdata name="DID">16474</sdata><sdata name="SDDDOCNAME">WCC_CLUSTER1-006061</sdata><score>100</score></hit></hitlist><count>34</count><groups sdata="SDDRILLDOWN"><group value="Document,insight_application1,"><count>34</count></group></groups></ctx_result_set>
>search/7
02.19 15:23:53.692
IdcServer-14885
Trace:
search/7
02.19 15:23:53.692
IdcServer-14885
ctx_query.result_set start time:15:23:53.64
search/7
02.19 15:23:53.692
IdcServer-14885
ctx_query.result_set end time:15:23:53.66
search/7
02.19 15:23:53.692
IdcServer-14885
Result parsing start time: 15:23:53.66
search/7
02.19 15:23:53.692
IdcServer-14885
Result parsing end time: 15:23:53.67
search/7
02.19 15:23:53.692
IdcServer-14885
SELECT dDocName,dDocTitle,dDocType,dSecurityGroup,dInDate,xArchiveFlag,xHidden,xWebsiteObjectType,xWebsiteSection,xDontShowInListsForWebsites,dRevisionID,dDocCreator,dWebExtension,xUpdateContentType,xSubmitForApproval,xFilesAllowed,xRegionDefinition,xWCWorkflowAssignment,dDocCreatedDate,dCreateDate,xWCTags,dOriginalName,xNewsType,dFormat,dPublishType,dDocFunction,dDocAuthor,VaultFileSize,dDocLastModifier,xWebFlag,dOutDate,dGif,dExtension,dDocLastModifiedDate,xClbraRoleList,xInhibitUpdate,URL,AlternateFormat,WebFileSize,xClbraUserList,dDocOwner,xReadOnly,dRevClassID,xWCWorkflowApproverUserList,xCollectionID,xComments,xPartitionId,dRevLabel,xStorageRule,dFullTextFormat,xWebsites,xDocumentSortDate,dRendition2,dRendition1,dID,xReadyForReplication,dDocAccount,xReadMoreURL,xIdcProfile,xClbraAliasList,otsFormat,otsCharset,otsLanguage FROM IdcText2 WHERE dID IN (11489,16132,13513,11319,17043,16477,16162,16010,10524,10777,10508,10476,12427,16333,17080,15926,16857,16895,16487,12431,16813,9569,16814,17045,12246,15911,16775,11925,15639,16865,10100,17116,9015,16474)
search/7
02.19 15:23:53.692
IdcServer-14885
Meta query start time: 15:23:53.67
search/7
02.19 15:23:53.692
IdcServer-14885
Meta query end time:15:23:53.67
>searchquery/6
02.19 15:23:53.692
IdcServer-14885
!csMonitorActiveDbConnections,0
>searchquery/6
02.19 15:23:53.692
IdcServer-14885
Connection is removed from active connections with key of '[ACTIVE] ExecuteThread: '35' for queue: 'weblogic.kernel.Default (self-tuning)''.
>searchquery/6
02.19 15:23:53.692
IdcServer-14885
release pool connection
>searchquery/6
02.19 15:23:53.708
IdcServer-14885
Execution time is 65 ms.
>searchquery/7
02.19 15:23:53.945
IdcServer-14886
Query by [email protected] from CIS
>searchquery/6
02.19 15:23:53.946
IdcServer-14886
preparedQueryText: ( ((xRegionDefinition <matches> `NEWS_REG_DEF`) <and> ((xArchiveFlag <matches> `Yes`) <and> ((xDocumentSortDate>`2013-01-01 00:00:00`) <and> (xDocumentSortDate<`2013-12-31 00:00:00`)))) )
>searchquery/6
02.19 15:23:53.946
IdcServer-14886
Setting substr to other operator conv flag: '( ((xRegionDefinition <matches> `NEWS_REG_DEF`) <and> ((xArchiveFlag <matches> `Yes`) <and> ((xDocumentSortDate>`2013-01-01 00:00:00`) <and> (xDocumentSortDate<`2013-12-31 00:00:00`)))) )'
>searchqueryparse/6
02.19 15:23:53.946
IdcServer-14886
Into parse of UniversalSearchQuery for: ( ((xRegionDefinition <matches> `NEWS_REG_DEF`) <and> ((xArchiveFlag <matches> `Yes`) <and> ((xDocumentSortDate>`2013-01-01 00:00:00`) <and> (xDocumentSortDate<`2013-12-31 00:00:00`)))) )
>searchqueryparse/6
02.19 15:23:53.946
IdcServer-14886
Into parseQueryEx of UniversalSearchQueryParser for queryArr : ( ((xRegionDefinition <matches> `NEWS_REG_DEF`) <and> ((xArchiveFlag <matches> `Yes`) <and> ((xDocumentSortDate>`2013-01-01 00:00:00`) <and> (xDocumentSortDate<`2013-12-31 00:00:00`)))) )
>searchquery/6
02.19 15:23:53.946
IdcServer-14886
Parsing universal query: '( ((xRegionDefinition <matches> `NEWS_REG_DEF`) <and> ((xArchiveFlag <matches> `Yes`) <and> ((xDocumentSortDate>`2013-01-01 00:00:00`) <and> (xDocumentSortDate<`2013-12-31 00:00:00`)))) )'
>searchquery/6
02.19 15:23:53.946
IdcServer-14886
Processing callback on query value 'NEWS_REG_DEF'
>searchqueryparse/6
02.19 15:23:53.946
IdcServer-14886
Into appendClauseElement CommonSearchConfig with operator : equals value : NEWS_REG_DEF
>searchqueryparse/6
02.19 15:23:53.946
IdcServer-14886
Processing actions list size : 1 on the input value : xRegionDefinition with searchengine ORACLETEXTSEARCH
>searchqueryparse/6
02.19 15:23:53.946
IdcServer-14886
Processing action number : 0 : prefix on the input value : xRegionDefinition with searchengine ORACLETEXTSEARCH
>searchqueryparse/6
02.19 15:23:53.946
IdcServer-14886
Processing actions list size : 2 on the input value : NEWS_REG_DEF with searchengine ORACLETEXTSEARCH
>searchqueryparse/6
02.19 15:23:53.946
IdcServer-14886
Processing action number : 0 : upperCase on the input value : NEWS_REG_DEF with searchengine ORACLETEXTSEARCH
>searchqueryparse/6
02.19 15:23:53.946
IdcServer-14886
Processing action number : 1 : escape on the input value : NEWS_REG_DEF with searchengine ORACLETEXTSEARCH
>searchqueryparse/6
02.19 15:23:53.946
IdcServer-14886
Processed escape with '' resulting in value :NEWS_REG_DEF
>searchqueryparse/6
02.19 15:23:53.946
IdcServer-14886
Processed escape with _ resulting in value :NEWS_REG_DEF
>searchqueryparse/6
02.19 15:23:53.946
IdcServer-14886
Processed escape with \- resulting in value :NEWS_REG_DEF
>searchqueryparse/6
02.19 15:23:53.946
IdcServer-14886
Processed escape with \_ resulting in value :NEWS\_REG\_DEF
>searchqueryparse/6
02.19 15:23:53.946
IdcServer-14886
Processed escape with \, resulting in value :NEWS\_REG\_DEF
>searchqueryparse/6
02.19 15:23:53.946
IdcServer-14886
Into appendClauseElement CommonSearchConfig with operator : and value :
>searchquery/6
02.19 15:23:53.946
IdcServer-14886
Processing callback on query value 'Yes'
>searchqueryparse/6
02.19 15:23:53.946
IdcServer-14886
Into appendClauseElement CommonSearchConfig with operator : equals value : Yes
>searchqueryparse/6
02.19 15:23:53.946
IdcServer-14886
Processing actions list size : 1 on the input value : xArchiveFlag with searchengine ORACLETEXTSEARCH
>searchqueryparse/6
02.19 15:23:53.946
IdcServer-14886
Processing action number : 0 : prefix on the input value : xArchiveFlag with searchengine ORACLETEXTSEARCH
>searchqueryparse/6
02.19 15:23:53.946
IdcServer-14886
Processing actions list size : 2 on the input value : Yes with searchengine ORACLETEXTSEARCH
>searchqueryparse/6
02.19 15:23:53.946
IdcServer-14886
Processing action number : 0 : upperCase on the input value : Yes with searchengine ORACLETEXTSEARCH
>searchqueryparse/6
02.19 15:23:53.946
IdcServer-14886
Processing action number : 1 : escape on the input value : YES with searchengine ORACLETEXTSEARCH
>searchqueryparse/6
02.19 15:23:53.946
IdcServer-14886
Processed escape with '' resulting in value :YES
>searchqueryparse/6
02.19 15:23:53.946
IdcServer-14886
Processed escape with _ resulting in value :YES
>searchqueryparse/6
02.19 15:23:53.946
IdcServer-14886
Processed escape with \- resulting in value :YES
>searchqueryparse/6
02.19 15:23:53.947
IdcServer-14886
Processed escape with \_ resulting in value :YES
>searchqueryparse/6
02.19 15:23:53.947
IdcServer-14886
Processed escape with \, resulting in value :YES
>searchqueryparse/6
02.19 15:23:53.947
IdcServer-14886
Into appendClauseElement CommonSearchConfig with operator : and value :
>searchquery/6
02.19 15:23:53.947
IdcServer-14886
Processing callback on query value '2013-01-01 00:00:00'
>searchqueryparse/6
02.19 15:23:53.947
IdcServer-14886
Into appendClauseElement CommonSearchConfig with operator : dateGreater value : 2012/12/31 18:00:00
>searchqueryparse/6
02.19 15:23:53.947
IdcServer-14886
Into appendClauseElement CommonSearchConfig with operator : and value :
>searchquery/6
02.19 15:23:53.947
IdcServer-14886
Processing callback on query value '2013-12-31 00:00:00'
>searchqueryparse/6
02.19 15:23:53.947
IdcServer-14886
Into appendClauseElement CommonSearchConfig with operator : dateLess value : 2013/12/30 18:00:00
>searchquery/6
02.19 15:23:53.947
IdcServer-14886
Converted native query: '((( SDATA(sdxRegionDefinition LIKE 'NEWS\_REG\_DEF') ) and (( SDATA(sdxArchiveFlag LIKE 'YES') ) and (( SDATA(xDocumentSortDate > '2012/12/31 18:00:00') ) and ( SDATA(xDocumentSortDate < '2013/12/30 18:00:00') )))))'
>searchquery/7
02.19 15:23:53.947
IdcServer-14886
assigning connection
>searchquery/6
02.19 15:23:53.947
IdcServer-14886
!csMonitorActiveDbConnections,1
>searchquery/6
02.19 15:23:53.947
IdcServer-14886
Connection is added to active connections with key of '[ACTIVE] ExecuteThread: '1' for queue: 'weblogic.kernel.Default (self-tuning)''.
>searchquery/6
02.19 15:23:53.947
IdcServer-14886
query(live): (((((((((((( SDATA(sdxRegionDefinition LIKE 'NEWS\_REG\_DEF') ) and (( SDATA(sdxArchiveFlag LIKE 'YES') ) and (( SDATA(xDocumentSortDate > '2012/12/31 18:00:00') ) and ( SDATA(xDocumentSortDate < '2013/12/30 18:00:00') )))))))))))))) [1,51] sort(xDocumentSortDate DESC)
>search/6
02.19 15:23:53.992
IdcServer-14886
Start parsing drill down fields with SAX...
>search/6
02.19 15:23:53.993
IdcServer-14886
Completed parsing 1 groups.
>search/7
02.19 15:23:53.994
IdcServer-14886
ResultSetInterface results: <ctx_result_set><hitlist><hit><sdata name="DID">11489</sdata><sdata name="SDDDOCNAME">WCC_CLUSTER1-006063</sdata><score>100</score></hit><hit><sdata name="DID">16132</sdata><sdata name="SDDDOCNAME">WCC_CLUSTER1-006403</sdata><score>100</score></hit><hit><sdata name="DID">13513</sdata><sdata name="SDDDOCNAME">WCC_CLUSTER1-006591</sdata><score>100</score></hit><hit><sdata name="DID">11319</sdata><sdata name="SDDDOCNAME">WCC_CLUSTER1-006003</sdata><score>100</score></hit><hit><sdata name="DID">17043</sdata><sdata name="SDDDOCNAME">WCC_CLUSTER1004050</sdata><score>100</score></hit><hit><sdata name="DID">16477</sdata><sdata name="SDDDOCNAME">WCC_CLUSTER1-006407</sdata><score>100</score></hit><hit><sdata name="DID">16162</sdata><sdata name="SDDDOCNAME">WCC_CLUSTER1-006593</sdata><score>100</score></hit><hit><sdata name="DID">16010</sdata><sdata name="SDDDOCNAME">WCC_CLUSTER1-006399</sdata><score>100</score></hit><hit><sdata name="DID">10524</sdata><sdata name="SDDDOCNAME">WCC_CLUSTER1-005609</sdata><score>100</score></hit><hit><sdata name="DID">10777</sdata><sdata name="SDDDOCNAME">WCC_CLUSTER1-005601</sdata><score>100</score></hit><hit><sdata name="DID">10508</sdata><sdata name="SDDDOCNAME">WCC_CLUSTER1-005600</sdata><score>100</score></hit><hit><sdata name="DID">10476</sdata><sdata name="SDDDOCNAME">WCC_CLUSTER1-005585</sdata><score>100</score></hit><hit><sdata name="DID">12427</sdata><sdata name="SDDDOCNAME">WCC_CLUSTER1-006397</sdata><score>100</score></hit><hit><sdata name="DID">16333</sdata><sdata name="SDDDOCNAME">WCC_CLUSTER1-005580</sdata><score>100</score></hit><hit><sdata name="DID">17080</sdata><sdata name="SDDDOCNAME">WCC_CLUSTER1004051</sdata><score>100</score></hit><hit><sdata name="DID">15926</sdata><sdata name="SDDDOCNAME">WCC_CLUSTER1-006482</sdata><score>100</score></hit><hit><sdata name="DID">16857</sdata><sdata name="SDDDOCNAME">WCC_CLUSTER1003963</sdata><score>100</score></hit><hit><sdata name="DID">16895</sdata><sdata name="SDDDOCNAME">WCC_CLUSTER1003964</sdata><score>100</score></hit><hit><sdata name="DID">16487</sdata><sdata name="SDDDOCNAME">WCC_CLUSTER1-006481</sdata><score>100</score></hit><hit><sdata name="DID">12431</sdata><sdata name="SDDDOCNAME">WCC_CLUSTER1-006485</sdata><score>100</score></hit><hit><sdata name="DID">16813</sdata><sdata name="SDDDOCNAME">WCC_CLUSTER1003977</sdata><score>100</score></hit><hit><sdata name="DID">9569</sdata><sdata name="SDDDOCNAME">WCC_CLUSTER1-005342</sdata><score>100</score></hit><hit><sdata name="DID">16814</sdata><sdata name="SDDDOCNAME">WCC_CLUSTER1003978</sdata><score>100</score></hit><hit><sdata name="DID">17045</sdata><sdata name="SDDDOCNAME">WCC_CLUSTER1004056</sdata><score>100</score></hit><hit><sdata name="DID">12246</sdata><sdata name="SDDDOCNAME">WCC_CLUSTER1-006478</sdata><score>100</score></hit><hit><sdata name="DID">15911</sdata><sdata name="SDDDOCNAME">WCC_CLUSTER1-005652</sdata><score>100</score></hit><hit><sdata name="DID">16775</sdata><sdata name="SDDDOCNAME">WCC_CLUSTER1003999</sdata><score>100</score></hit><hit><sdata name="DID">11925</sdata><sdata name="SDDDOCNAME">VMOHSKEND05482000776</sdata><score>100</score></hit><hit><sdata name="DID">15639</sdata><sdata name="SDDDOCNAME">VMOHSKEND05482000763</sdata><score>100</score></hit><hit><sdata name="DID">16865</sdata><sdata name="SDDDOCNAME">VMOHSKEND05482000770</sdata><score>100</score></hit><hit><sdata name="DID">10100</sdata><sdata name="SDDDOCNAME">VMOHSKEND05482000741</sdata><score>100</score></hit><hit><sdata name="DID">17116</sdata><sdata name="SDDDOCNAME">WCC_CLUSTER1004054</sdata><score>100</score></hit><hit><sdata name="DID">9015</sdata><sdata name="SDDDOCNAME">VMOHSKEND05482000801</sdata><score>100</score></hit><hit><sdata name="DID">16474</sdata><sdata name="SDDDOCNAME">WCC_CLUSTER1-006061</sdata><score>100</score></hit></hitlist><count>34</count><groups sdata="SDDRILLDOWN"><group value="Document,insight_application1,"><count>34</count></group></groups></ctx_result_set>
>search/7
02.19 15:23:53.994
IdcServer-14886
Trace:
search/7
02.19 15:23:53.994
IdcServer-14886
ctx_query.result_set start time:15:23:53.95
search/7
02.19 15:23:53.994
IdcServer-14886
ctx_query.result_set end time:15:23:53.96
search/7
02.19 15:23:53.994
IdcServer-14886
Result parsing start time: 15:23:53.96
search/7
02.19 15:23:53.994
IdcServer-14886
Result parsing end time: 15:23:53.97
search/7
02.19 15:23:53.994
IdcServer-14886
SELECT dDocName,dDocTitle,dDocType,dSecurityGroup,dInDate,xArchiveFlag,xHidden,xWebsiteObjectType,xWebsiteSection,xDontShowInListsForWebsites,dRevisionID,dDocCreator,dWebExtension,xUpdateContentType,xSubmitForApproval,xFilesAllowed,xRegionDefinition,xWCWorkflowAssignment,dDocCreatedDate,dCreateDate,xWCTags,dOriginalName,xNewsType,dFormat,dPublishType,dDocFunction,dDocAuthor,VaultFileSize,dDocLastModifier,xWebFlag,dOutDate,dGif,dExtension,dDocLastModifiedDate,xClbraRoleList,xInhibitUpdate,URL,AlternateFormat,WebFileSize,xClbraUserList,dDocOwner,xReadOnly,dRevClassID,xWCWorkflowApproverUserList,xCollectionID,xComments,xPartitionId,dRevLabel,xStorageRule,dFullTextFormat,xWebsites,xDocumentSortDate,dRendition2,dRendition1,dID,xReadyForReplication,dDocAccount,xReadMoreURL,xIdcProfile,xClbraAliasList,otsFormat,otsCharset,otsLanguage FROM IdcText2 WHERE dID IN (11489,16132,13513,11319,17043,16477,16162,16010,10524,10777,10508,10476,12427,16333,17080,15926,16857,16895,16487,12431,16813,9569,16814,17045,12246,15911,16775,11925,15639,16865,10100,17116,9015,16474)
search/7
02.19 15:23:53.994
IdcServer-14886
Meta query start time: 15:23:53.97
search/7
02.19 15:23:53.994
IdcServer-14886
Meta query end time:15:23:53.98
>searchquery/6
02.19 15:23:53.995
IdcServer-14886
!csMonitorActiveDbConnections,0
>searchquery/6
02.19 15:23:53.995
IdcServer-14886
Connection is removed from active connections with key of '[ACTIVE] ExecuteThread: '1' for queue: 'weblogic.kernel.Default (self-tuning)''.
>searchquery/6
02.19 15:23:53.995
IdcServer-14886
release pool connection
>searchquery/6
02.19 15:23:54.007
IdcServer-14886
Execution time is 61 ms.
>searchquery/7
02.19 15:23:54.313
IdcServer-14887
Query by [email protected] from CIS
>searchquery/6
02.19 15:23:54.313
IdcServer-14887
preparedQueryText: ( ((xRegionDefinition <matches> `NEWS_REG_DEF`) <and> ((xArchiveFlag <matches> `Yes`) <and> ((xDocumentSortDate>`2014-01-01 00:00:00`) <and> (xDocumentSortDate<`2014-12-31 00:00:00`)))) )
>searchquery/6
02.19 15:23:54.313
IdcServer-14887
Setting substr to other operator conv flag: '( ((xRegionDefinition <matches> `NEWS_REG_DEF`) <and> ((xArchiveFlag <matches> `Yes`) <and> ((xDocumentSortDate>`2014-01-01 00:00:00`) <and> (xDocumentSortDate<`2014-12-31 00:00:00`)))) )'
>searchqueryparse/6
02.19 15:23:54.313
IdcServer-14887
Into parse of UniversalSearchQuery for: ( ((xRegionDefinition <matches> `NEWS_REG_DEF`) <and> ((xArchiveFlag <matches> `Yes`) <and> ((xDocumentSortDate>`2014-01-01 00:00:00`) <and> (xDocumentSortDate<`2014-12-31 00:00:00`)))) )
>searchqueryparse/6
02.19 15:23:54.313
IdcServer-14887
Into parseQueryEx of UniversalSearchQueryParser for queryArr : ( ((xRegionDefinition <matches> `NEWS_REG_DEF`) <and> ((xArchiveFlag <matches> `Yes`) <and> ((xDocumentSortDate>`2014-01-01 00:00:00`) <and> (xDocumentSortDate<`2014-12-31 00:00:00`)))) )
>searchquery/6
02.19 15:23:54.313
IdcServer-14887
Parsing universal query: '( ((xRegionDefinition <matches> `NEWS_REG_DEF`) <and> ((xArchiveFlag <matches> `Yes`) <and> ((xDocumentSortDate>`2014-01-01 00:00:00`) <and> (xDocumentSortDate<`2014-12-31 00:00:00`)))) )'
>searchquery/6
02.19 15:23:54.313
IdcServer-14887
Processing callback on query value 'NEWS_REG_DEF'
>searchqueryparse/6
02.19 15:23:54.313
IdcServer-14887
Into appendClauseElement CommonSearchConfig with operator : equals value : NEWS_REG_DEF
>searchqueryparse/6
02.19 15:23:54.313
IdcServer-14887
Processing actions list size : 1 on the input value : xRegionDefinition with searchengine ORACLETEXTSEARCH
>searchqueryparse/6
02.19 15:23:54.313
IdcServer-14887
Processing action number : 0 : prefix on the input value : xRegionDefinition with searchengine ORACLETEXTSEARCH
>searchqueryparse/6
02.19 15:23:54.313
IdcServer-14887
Processing actions list size : 2 on the input value : NEWS_REG_DEF with searchengine ORACLETEXTSEARCH
>searchqueryparse/6
02.19 15:23:54.314
IdcServer-14887
Processing action number : 0 : upperCase on the input value : NEWS_REG_DEF with searchengine ORACLETEXTSEARCH
>searchqueryparse/6
02.19 15:23:54.314
IdcServer-14887
Processing action number : 1 : escape on the input value : NEWS_REG_DEF with searchengine ORACLETEXTSEARCH
>searchqueryparse/6
02.19 15:23:54.314
IdcServer-14887
Processed escape with '' resulting in value :NEWS_REG_DEF
>searchqueryparse/6
02.19 15:23:54.314
IdcServer-14887
Processed escape with _ resulting in value :NEWS_REG_DEF
>searchqueryparse/6
02.19 15:23:54.314
IdcServer-14887
Processed escape with \- resulting in value :NEWS_REG_DEF
>searchqueryparse/6
02.19 15:23:54.314
IdcServer-14887
Processed escape with \_ resulting in value :NEWS\_REG\_DEF
>searchqueryparse/6
02.19 15:23:54.314
IdcServer-14887
Processed escape with \, resulting in value :NEWS\_REG\_DEF
>searchqueryparse/6
02.19 15:23:54.314
IdcServer-14887
Into appendClauseElement CommonSearchConfig with operator : and value :
>searchquery/6
02.19 15:23:54.314
IdcServer-14887
Processing callback on query value 'Yes'
>searchqueryparse/6
02.19 15:23:54.314
IdcServer-14887
Into appendClauseElement CommonSearchConfig with operator : equals value : Yes
>searchqueryparse/6
02.19 15:23:54.314
IdcServer-14887
Processing actions list size : 1 on the input value : xArchiveFlag with searchengine ORACLETEXTSEARCH
>searchqueryparse/6
02.19 15:23:54.314
IdcServer-14887
Processing action number : 0 : prefix on the input value : xArchiveFlag with searchengine ORACLETEXTSEARCH
>searchqueryparse/6
02.19 15:23:54.314
IdcServer-14887
Processing actions list size : 2 on the input value : Yes with searchengine ORACLETEXTSEARCH
>searchqueryparse/6
02.19 15:23:54.314
IdcServer-14887
Processing action number : 0 : upperCase on the input value : Yes with searchengine ORACLETEXTSEARCH
>searchqueryparse/6
02.19 15:23:54.314
IdcServer-14887
Processing action number : 1 : escape on the input value : YES with searchengine ORACLETEXTSEARCH
>searchqueryparse/6
02.19 15:23:54.314
IdcServer-14887
Processed escape with '' resulting in value :YES
>searchqueryparse/6
02.19 15:23:54.314
IdcServer-14887
Processed escape with _ resulting in value :YES
>searchqueryparse/6
02.19 15:23:54.314
IdcServer-14887
Processed escape with \- resulting in value :YES
>searchqueryparse/6
02.19 15:23:54.314
IdcServer-14887
Processed escape with \_ resulting in value :YES
>searchqueryparse/6
02.19 15:23:54.314
IdcServer-14887
Processed escape with \, resulting in value :YES
>searchqueryparse/6
02.19 15:23:54.314
IdcServer-14887
Into appendClauseElement CommonSearchConfig with operator : and value :
>searchquery/6
02.19 15:23:54.314
IdcServer-14887
Processing callback on query value '2014-01-01 00:00:00'
>searchqueryparse/6
02.19 15:23:54.314
IdcServer-14887
Into appendClauseElement CommonSearchConfig with operator : dateGreater value : 2013/12/31 18:00:00
>searchqueryparse/6
02.19 15:23:54.314
IdcServer-14887
Into appendClauseElement CommonSearchConfig with operator : and value :
>searchquery/6
02.19 15:23:54.314
IdcServer-14887
Processing callback on query value '2014-12-31 00:00:00'
>searchqueryparse/6
02.19 15:23:54.314
IdcServer-14887
Into appendClauseElement CommonSearchConfig with operator : dateLess value : 2014/12/30 18:00:00
>searchquery/6
02.19 15:23:54.314
IdcServer-14887
Converted native query: '((( SDATA(sdxRegionDefinition LIKE 'NEWS\_REG\_DEF') ) and (( SDATA(sdxArchiveFlag LIKE 'YES') ) and (( SDATA(xDocumentSortDate > '2013/12/31 18:00:00') ) and ( SDATA(xDocumentSortDate < '2014/12/30 18:00:00') )))))'
>searchquery/7
02.19 15:23:54.314
IdcServer-14887
assigning connection
>searchquery/6
02.19 15:23:54.314
IdcServer-14887
!csMonitorActiveDbConnections,1
>searchquery/6
02.19 15:23:54.314
IdcServer-14887
Connection is added to active connections with key of '[ACTIVE] ExecuteThread: '21' for queue: 'weblogic.kernel.Default (self-tuning)''.
>searchquery/6
02.19 15:23:54.315
IdcServer-14887
query(live): (((((((((((( SDATA(sdxRegionDefinition LIKE 'NEWS\_REG\_DEF') ) and (( SDATA(sdxArchiveFlag LIKE 'YES') ) and (( SDATA(xDocumentSortDate > '2013/12/31 18:00:00') ) and ( SDATA(xDocumentSortDate < '2014/12/30 18:00:00') )))))))))))))) [1,51] sort(xDocumentSortDate DESC)
>search/6
02.19 15:23:54.365
IdcServer-14887
Start parsing drill down fields with SAX...
>search/6
02.19 15:23:54.367
IdcServer-14887
Completed parsing 1 groups.
>search/7
02.19 15:23:54.369
IdcServer-14887
ResultSetInterface results: <ctx_result_set><hitlist><hit><sdata name="DID">17207</sdata><sdata name="SDDDOCNAME">WCC_CLUSTER1004318</sdata><score>100</score></hit><hit><sdata name="DID">17281</sdata><sdata name="SDDDOCNAME">WCC_CLUSTER1004289</sdata><score>100</score></hit><hit><sdata name="DID">17105</sdata><sdata name="SDDDOCNAME">WCC_CLUSTER1004316</sdata><score>100</score></hit><hit><sdata name="DID">17244</sdata><sdata name="SDDDOCNAME">WCC_CLUSTER1004252</sdata><score>100</score></hit><hit><sdata name="DID">16997</sdata><sdata name="SDDDOCNAME">WCC_CLUSTER1004251</sdata><score>100</score></hit><hit><sdata name="DID">17034</sdata><sdata name="SDDDOCNAME">WCC_CLUSTER1004233</sdata><score>100</score></hit><hit><sdata name="DID">17239</sdata><sdata name="SDDDOCNAME">WCC_CLUSTER1004219</sdata><score>100</score></hit><hit><sdata name="DID">17178</sdata><sdata name="SDDDOCNAME">WCC_CLUSTER1004186</sdata><score>100</score></hit><hit><sdata name="DID">17112</sdata><sdata name="SDDDOCNAME">WCC_CLUSTER1004150</sdata><score>100</score></hit><hit><sdata name="DID">17276</sdata><sdata name="SDDDOCNAME">WCC_CLUSTER1004148</sdata><score>100</score></hit><hit><sdata name="DID">17193</sdata><sdata name="SDDDOCNAME">WCC_CLUSTER1004137</sdata><score>100</score></hit><hit><sdata name="DID">17070</sdata><sdata name="SDDDOCNAME">WCC_CLUSTER1004132</sdata><score>100</score></hit><hit><sdata name="DID">17195</sdata><sdata name="SDDDOCNAME">WCC_CLUSTER1004123</sdata><score>100</score></hit><hit><sdata name="DID">17275</sdata><sdata name="SDDDOCNAME">WCC_CLUSTER1004116</sdata><score>100</score></hit><hit><sdata name="DID">17189</sdata><sdata name="SDDDOCNAME">WCC_CLUSTER1004080</sdata><score>100</score></hit><hit><sdata name="DID">16993</sdata><sdata name="SDDDOCNAME">WCC_CLUSTER1004089</sdata><score>100</score></hit><hit><sdata name="DID">17032</sdata><sdata name="SDDDOCNAME">WCC_CLUSTER1004070</sdata><score>100</score></hit><hit><sdata name="DID">16784</sdata><sdata name="SDDDOCNAME">WCC_CLUSTER1004035</sdata><score>100</score></hit><hit><sdata name="DID">16268</sdata><sdata name="SDDDOCNAME">WCC_CLUSTER1-006848</sdata><score>100</score></hit><hit><sdata name="DID">16866</sdata><sdata name="SDDDOCNAME">WCC_CLUSTER1004028</sdata><score>100</score></hit><hit><sdata name="DID">16940</sdata><sdata name="SDDDOCNAME">WCC_CLUSTER1004027</sdata><score>100</score></hit><hit><sdata name="DID">16823</sdata><sdata name="SDDDOCNAME">WCC_CLUSTER1004025</sdata><score>100</score></hit><hit><sdata name="DID">16731</sdata><sdata name="SDDDOCNAME">WCC_CLUSTER1004024</sdata><score>100</score></hit><hit><sdata name="DID">17132</sdata><sdata name="SDDDOCNAME">WCC_CLUSTER1004023</sdata><score>100</score></hit><hit><sdata name="DID">16645</sdata><sdata name="SDDDOCNAME">WCC_CLUSTER1004020</sdata><score>100</score></hit><hit><sdata name="DID">16678</sdata><sdata name="SDDDOCNAME">WCC_CLUSTER1004002</sdata><score>100</score></hit><hit><sdata name="DID">16642</sdata><sdata name="SDDDOCNAME">WCC_CLUSTER1004000</sdata><score>100</score></hit><hit><sdata name="DID">16610</sdata><sdata name="SDDDOCNAME">WCC_CLUSTER1-008921</sdata><score>100</score></hit><hit><sdata name="DID">16726</sdata><sdata name="SDDDOCNAME">WCC_CLUSTER1003959</sdata><score>100</score></hit><hit><sdata name="DID">16663</sdata><sdata name="SDDDOCNAME">WCC_CLUSTER1003952</sdata><score>100</score></hit><hit><sdata name="DID">15967</sdata><sdata name="SDDDOCNAME">WCC_CLUSTER1003823</sdata><score>100</score></hit><hit><sdata name="DID">15878</sdata><sdata name="SDDDOCNAME">WCC_CLUSTER1003821</sdata><score>100</score></hit><hit><sdata name="DID">16277</sdata><sdata name="SDDDOCNAME">WCC_CLUSTER1003820</sdata><score>100</score></hit><hit><sdata name="DID">15624</sdata><sdata name="SDDDOCNAME">WCC_CLUSTER1-008149</sdata><score>100</score></hit><hit><sdata name="DID">16178</sdata><sdata name="SDDDOCNAME">WCC_CLUSTER1003607</sdata><score>100</score></hit><hit><sdata name="DID">16765</sdata><sdata name="SDDDOCNAME">WCC_CLUSTER1003764</sdata><score>100</score></hit><hit><sdata name="DID">16691</sdata><sdata name="SDDDOCNAME">WCC_CLUSTER1003766</sdata><score>100</score></hit><hit><sdata name="DID">16827</sdata><sdata name="SDDDOCNAME">WCC_CLUSTER1003499</sdata><score>100</score></hit><hit><sdata name="DID">16303</sdata><sdata name="SDDDOCNAME">WCC_CLUSTER1003498</sdata><score>100</score></hit><hit><sdata name="DID">16696</sdata><sdata name="SDDDOCNAME">WCC_CLUSTER1003756</sdata><score>100</score></hit><hit><sdata name="DID">16937</sdata><sdata name="SDDDOCNAME">WCC_CLUSTER1003806</sdata><score>100</score></hit><hit><sdata name="DID">15976</sdata><sdata name="SDDDOCNAME">WCC_CLUSTER1003381</sdata><score>100</score></hit><hit><sdata name="DID">16364</sdata><sdata name="SDDDOCNAME">WCC_CLUSTER1003807</sdata><score>100</score></hit><hit><sdata name="DID">15832</sdata><sdata name="SDDDOCNAME">WCC_CLUSTER1003803</sdata><score>100</score></hit><hit><sdata name="DID">17285</sdata><sdata name="SDDDOCNAME">WCC_CLUSTER1004041</sdata><score>100</score></hit><hit><sdata name="DID">16639</sdata><sdata name="SDDDOCNAME">WCC_CLUSTER1003972</sdata><score>100</score></hit><hit><sdata name="DID">16820</sdata><sdata name="SDDDOCNAME">WCC_CLUSTER1003628</sdata><score>100</score></hit><hit><sdata name="DID">15183</sdata><sdata name="SDDDOCNAME">WCC_CLUSTER1-007721</sdata><score>100</score></hit><hit><sdata name="DID">15180</sdata><sdata name="SDDDOCNAME">WCC_CLUSTER1-007720</sdata><score>100</score></hit><hit><sdata name="DID">15640</sdata><sdata name="SDDDOCNAME">WCC_CLUSTER1-007722</sdata><score>100</score></hit><hit><sdata name="DID">15631</sdata><sdata name="SDDDOCNAME">WCC_CLUSTER1-007719</sdata><score>100</score></hit></hitlist><count>66</count><groups sdata="SDDRILLDOWN"><group value="Document,insight_application1,"><count>66</count></group></groups></ctx_result_set>
>search/7
02.19 15:23:54.369
IdcServer-14887
Trace:
search/7
02.19 15:23:54.369
IdcServer-14887
ctx_query.result_set start time:15:23:54.31
search/7
02.19 15:23:54.369
IdcServer-14887
ctx_query.result_set end time:15:23:54.32
search/7
02.19 15:23:54.369
IdcServer-14887
Result parsing start time: 15:23:54.33
search/7
02.19 15:23:54.369
IdcServer-14887
Result parsing end time: 15:23:54.35
search/7
02.19 15:23:54.369
IdcServer-14887
SELECT dDocName,dDocTitle,dDocType,dSecurityGroup,dInDate,xArchiveFlag,xHidden,xWebsiteObjectType,xWebsiteSection,xDontShowInListsForWebsites,dRevisionID,dDocCreator,dWebExtension,xUpdateContentType,xSubmitForApproval,xFilesAllowed,xRegionDefinition,xWCWorkflowAssignment,dDocCreatedDate,dCreateDate,xWCTags,dOriginalName,xNewsType,dFormat,dPublishType,dDocFunction,dDocAuthor,VaultFileSize,dDocLastModifier,xWebFlag,dOutDate,dGif,dExtension,dDocLastModifiedDate,xClbraRoleList,xInhibitUpdate,URL,AlternateFormat,WebFileSize,xClbraUserList,dDocOwner,xReadOnly,dRevClassID,xWCWorkflowApproverUserList,xCollectionID,xComments,xPartitionId,dRevLabel,xStorageRule,dFullTextFormat,xWebsites,xDocumentSortDate,dRendition2,dRendition1,dID,xReadyForReplication,dDocAccount,xReadMoreURL,xIdcProfile,xClbraAliasList,otsFormat,otsCharset,otsLanguage FROM IdcText2 WHERE dID IN (17207,17281,17105,17244,16997,17034,17239,17178,17112,17276,17193,17070,17195,17275,17189,16993,17032,16784,16268,16866,16940,16823,16731,17132,16645,16678,16642,16610,16726,16663,15967,15878,16277,15624,16178,16765,16691,16827,16303,16696,16937,15976,16364,15832,17285,16639,16820,15183,15180,15640,15631)
search/7
02.19 15:23:54.369
IdcServer-14887
Meta query start time: 15:23:54.35
search/7
02.19 15:23:54.369
IdcServer-14887
Meta query end time:15:23:54.35
>searchquery/6
02.19 15:23:54.369
IdcServer-14887
!csMonitorActiveDbConnections,0
>searchquery/6
02.19 15:23:54.369
IdcServer-14887
Connection is removed from active connections with key of '[ACTIVE] ExecuteThread: '21' for queue: 'weblogic.kernel.Default (self-tuning)''.
>searchquery/6
02.19 15:23:54.369
IdcServer-14887
release pool connection
>searchquery/6
02.19 15:23:54.382
IdcServer-14887
Execution time is 69 ms.
>searchquery/7
02.19 15:23:54.662
IdcServer-14888
Query by [email protected] from CIS
>searchquery/6
02.19 15:23:54.662
IdcServer-14888
preparedQueryText: ( ((xRegionDefinition <matches> `NEWS_REG_DEF`) <and> ((xArchiveFlag <matches> `Yes`) <and> ((xDocumentSortDate>`2014-01-01 00:00:00`) <and> (xDocumentSortDate<`2014-12-31 00:00:00`)))) )
>searchquery/6
02.19 15:23:54.662
IdcServer-14888
Setting substr to other operator conv flag: '( ((xRegionDefinition <matches> `NEWS_REG_DEF`) <and> ((xArchiveFlag <matches> `Yes`) <and> ((xDocumentSortDate>`2014-01-01 00:00:00`) <and> (xDocumentSortDate<`2014-12-31 00:00:00`)))) )'
>searchqueryparse/6
02.19 15:23:54.662
IdcServer-14888
Into parse of UniversalSearchQuery for: ( ((xRegionDefinition <matches> `NEWS_REG_DEF`) <and> ((xArchiveFlag <matches> `Yes`) <and> ((xDocumentSortDate>`2014-01-01 00:00:00`) <and> (xDocumentSortDate<`2014-12-31 00:00:00`)))) )
>searchqueryparse/6
02.19 15:23:54.662
IdcServer-14888
Into parseQueryEx of UniversalSearchQueryParser for queryArr : ( ((xRegionDefinition <matches> `NEWS_REG_DEF`) <and> ((xArchiveFlag <matches> `Yes`) <and> ((xDocumentSortDate>`2014-01-01 00:00:00`) <and> (xDocumentSortDate<`2014-12-31 00:00:00`)))) )
>searchquery/6
02.19 15:23:54.662
IdcServer-14888
Parsing universal query: -
Why this Query is taking much longer time than expected?
Hi,
I need experts support on the below mentioned issue:
Why this Query is taking much longer time than expected? Sometimes I am getting connection timeout error. Is there any better way to achieve result in shortest time. Below, please find the DDL & DML:
DDL
BHDCollections
SET ANSI_NULLS ON
GO
SET QUOTED_IDENTIFIER ON
GO
SET ANSI_PADDING ON
GO
CREATE TABLE [dbo].[BHDCollections](
[BHDCollectionid] [bigint] IDENTITY(1,1) NOT NULL,
[GroupMemberid] [int] NOT NULL,
[BHDDate] [datetime] NOT NULL,
[BHDShift] [varchar](10) NULL,
[SlipValue] [decimal](18, 3) NOT NULL,
[ProcessedValue] [decimal](18, 3) NOT NULL,
[BHDRemarks] [varchar](500) NULL,
[Createdby] [varchar](50) NULL,
[Createdon] [datetime] NULL,
CONSTRAINT [PK_BHDCollections] PRIMARY KEY CLUSTERED
[BHDCollectionid] ASC
)WITH (PAD_INDEX = OFF, STATISTICS_NORECOMPUTE = OFF, IGNORE_DUP_KEY = OFF, ALLOW_ROW_LOCKS = ON, ALLOW_PAGE_LOCKS = ON) ON [PRIMARY]
) ON [PRIMARY]
GO
SET ANSI_PADDING OFF
BHDCollectionsDet
SET ANSI_NULLS ON
GO
SET QUOTED_IDENTIFIER ON
GO
CREATE TABLE [dbo].[BHDCollectionsDet](
[CollectionDetailid] [bigint] IDENTITY(1,1) NOT NULL,
[BHDCollectionid] [bigint] NOT NULL,
[Currencyid] [int] NOT NULL,
[Denomination] [decimal](18, 3) NOT NULL,
[Quantity] [int] NOT NULL,
CONSTRAINT [PK_BHDCollectionsDet] PRIMARY KEY CLUSTERED
[CollectionDetailid] ASC
)WITH (PAD_INDEX = OFF, STATISTICS_NORECOMPUTE = OFF, IGNORE_DUP_KEY = OFF, ALLOW_ROW_LOCKS = ON, ALLOW_PAGE_LOCKS = ON) ON [PRIMARY]
) ON [PRIMARY]
Banks
SET ANSI_NULLS ON
GO
SET QUOTED_IDENTIFIER ON
GO
SET ANSI_PADDING ON
GO
CREATE TABLE [dbo].[Banks](
[Bankid] [int] IDENTITY(1,1) NOT NULL,
[Bankname] [varchar](50) NOT NULL,
[Bankabbr] [varchar](50) NULL,
[BankContact] [varchar](50) NULL,
[BankTel] [varchar](25) NULL,
[BankFax] [varchar](25) NULL,
[BankEmail] [varchar](50) NULL,
[BankActive] [bit] NULL,
[Createdby] [varchar](50) NULL,
[Createdon] [datetime] NULL,
CONSTRAINT [PK_Banks] PRIMARY KEY CLUSTERED
[Bankid] ASC
)WITH (PAD_INDEX = OFF, STATISTICS_NORECOMPUTE = OFF, IGNORE_DUP_KEY = OFF, ALLOW_ROW_LOCKS = ON, ALLOW_PAGE_LOCKS = ON) ON [PRIMARY]
) ON [PRIMARY]
GO
SET ANSI_PADDING OFF
Groupmembers
SET ANSI_NULLS ON
GO
SET QUOTED_IDENTIFIER ON
GO
SET ANSI_PADDING ON
GO
CREATE TABLE [dbo].[GroupMembers](
[GroupMemberid] [int] IDENTITY(1,1) NOT NULL,
[Groupid] [int] NOT NULL,
[BAID] [int] NOT NULL,
[Createdby] [varchar](50) NULL,
[Createdon] [datetime] NULL,
CONSTRAINT [PK_GroupMembers] PRIMARY KEY CLUSTERED
[GroupMemberid] ASC
)WITH (PAD_INDEX = OFF, STATISTICS_NORECOMPUTE = OFF, IGNORE_DUP_KEY = OFF, ALLOW_ROW_LOCKS = ON, ALLOW_PAGE_LOCKS = ON) ON [PRIMARY]
) ON [PRIMARY]
GO
SET ANSI_PADDING OFF
GO
ALTER TABLE [dbo].[GroupMembers] WITH CHECK ADD CONSTRAINT [FK_GroupMembers_BankAccounts] FOREIGN KEY([BAID])
REFERENCES [dbo].[BankAccounts] ([BAID])
GO
ALTER TABLE [dbo].[GroupMembers] CHECK CONSTRAINT [FK_GroupMembers_BankAccounts]
GO
ALTER TABLE [dbo].[GroupMembers] WITH CHECK ADD CONSTRAINT [FK_GroupMembers_Groups] FOREIGN KEY([Groupid])
REFERENCES [dbo].[Groups] ([Groupid])
GO
ALTER TABLE [dbo].[GroupMembers] CHECK CONSTRAINT [FK_GroupMembers_Groups]
BankAccounts
SET ANSI_NULLS ON
GO
SET QUOTED_IDENTIFIER ON
GO
SET ANSI_PADDING ON
GO
CREATE TABLE [dbo].[BankAccounts](
[BAID] [int] IDENTITY(1,1) NOT NULL,
[CustomerID] [int] NOT NULL,
[Locationid] [varchar](25) NOT NULL,
[Bankid] [int] NOT NULL,
[BankAccountNo] [varchar](50) NOT NULL,
CONSTRAINT [PK_BankAccounts] PRIMARY KEY CLUSTERED
[BAID] ASC
)WITH (PAD_INDEX = OFF, STATISTICS_NORECOMPUTE = OFF, IGNORE_DUP_KEY = OFF, ALLOW_ROW_LOCKS = ON, ALLOW_PAGE_LOCKS = ON) ON [PRIMARY]
) ON [PRIMARY]
GO
SET ANSI_PADDING OFF
GO
ALTER TABLE [dbo].[BankAccounts] WITH CHECK ADD CONSTRAINT [FK_BankAccounts_Banks] FOREIGN KEY([Bankid])
REFERENCES [dbo].[Banks] ([Bankid])
GO
ALTER TABLE [dbo].[BankAccounts] CHECK CONSTRAINT [FK_BankAccounts_Banks]
GO
ALTER TABLE [dbo].[BankAccounts] WITH CHECK ADD CONSTRAINT [FK_BankAccounts_Locations1] FOREIGN KEY([Locationid])
REFERENCES [dbo].[Locations] ([Locationid])
GO
ALTER TABLE [dbo].[BankAccounts] CHECK CONSTRAINT [FK_BankAccounts_Locations1]
Currency
SET ANSI_NULLS ON
GO
SET QUOTED_IDENTIFIER ON
GO
SET ANSI_PADDING ON
GO
CREATE TABLE [dbo].[Currency](
[Currencyid] [int] IDENTITY(1,1) NOT NULL,
[CurrencyISOCode] [varchar](20) NOT NULL,
[CurrencyCountry] [varchar](50) NULL,
[Currency] [varchar](50) NULL,
CONSTRAINT [PK_Currency] PRIMARY KEY CLUSTERED
[Currencyid] ASC
)WITH (PAD_INDEX = OFF, STATISTICS_NORECOMPUTE = OFF, IGNORE_DUP_KEY = OFF, ALLOW_ROW_LOCKS = ON, ALLOW_PAGE_LOCKS = ON) ON [PRIMARY]
) ON [PRIMARY]
GO
SET ANSI_PADDING OFF
CurrencyDetails
SET ANSI_NULLS ON
GO
SET QUOTED_IDENTIFIER ON
GO
SET ANSI_PADDING ON
GO
CREATE TABLE [dbo].[CurrencyDetails](
[CurDenid] [int] IDENTITY(1,1) NOT NULL,
[Currencyid] [int] NOT NULL,
[Denomination] [decimal](15, 3) NOT NULL,
[DenominationType] [varchar](25) NOT NULL,
CONSTRAINT [PK_CurrencyDetails] PRIMARY KEY CLUSTERED
[CurDenid] ASC
)WITH (PAD_INDEX = OFF, STATISTICS_NORECOMPUTE = OFF, IGNORE_DUP_KEY = OFF, ALLOW_ROW_LOCKS = ON, ALLOW_PAGE_LOCKS = ON) ON [PRIMARY]
) ON [PRIMARY]
GO
SET ANSI_PADDING OFF
QUERY
WITH TEMP_TABLE AS
SELECT 0 AS COINS, BHDCollectionsDet.Quantity AS BN, BHDCollections.BHDDate AS CollectionDate, BHDCollectionsDet.Currencyid,
(BHDCollections.BHDCollectionid) AS DSLIPS, Banks.Bankname
FROM BHDCollections INNER JOIN
BHDCollectionsDet ON BHDCollections.BHDCollectionid = BHDCollectionsDet.BHDCollectionid INNER JOIN
GroupMembers ON BHDCollections.GroupMemberid = GroupMembers.GroupMemberid INNER JOIN
BankAccounts ON GroupMembers.BAID = BankAccounts.BAID INNER JOIN
Currency ON BHDCollectionsDet.Currencyid = Currency.Currencyid INNER JOIN
CurrencyDetails ON Currency.Currencyid = CurrencyDetails.Currencyid INNER JOIN
Banks ON BankAccounts.Bankid = Banks.Bankid
GROUP BY BHDCollectionsDet.Quantity, BHDCollections.BHDDate, BankAccounts.Bankid, BHDCollectionsDet.Currencyid, CurrencyDetails.DenominationType,
CurrencyDetails.Denomination, BHDCollectionsDet.Denomination, Banks.Bankname,BHDCollections.BHDCollectionid
HAVING (BHDCollections.BHDDate BETWEEN @FromDate AND @ToDate) AND (BankAccounts.Bankid = @Bankid) AND (CurrencyDetails.DenominationType = 'Currency') AND
(CurrencyDetails.Denomination = BHDCollectionsDet.Denomination)
UNION ALL
SELECT BHDCollectionsDet.Quantity AS COINS, 0 AS BN, BHDCollections.BHDDate AS CollectionDate, BHDCollectionsDet.Currencyid,
(BHDCollections.BHDCollectionid) AS DSLIPS, Banks.Bankname
FROM BHDCollections INNER JOIN
BHDCollectionsDet ON BHDCollections.BHDCollectionid = BHDCollectionsDet.BHDCollectionid INNER JOIN
GroupMembers ON BHDCollections.GroupMemberid = GroupMembers.GroupMemberid INNER JOIN
BankAccounts ON GroupMembers.BAID = BankAccounts.BAID INNER JOIN
Currency ON BHDCollectionsDet.Currencyid = Currency.Currencyid INNER JOIN
CurrencyDetails ON Currency.Currencyid = CurrencyDetails.Currencyid INNER JOIN
Banks ON BankAccounts.Bankid = Banks.Bankid
GROUP BY BHDCollectionsDet.Quantity, BHDCollections.BHDDate, BankAccounts.Bankid, BHDCollectionsDet.Currencyid, CurrencyDetails.DenominationType,
CurrencyDetails.Denomination, BHDCollectionsDet.Denomination, Banks.Bankname,BHDCollections.BHDCollectionid
HAVING (BHDCollections.BHDDate BETWEEN @FromDate AND @ToDate) AND (BankAccounts.Bankid = @Bankid) AND (CurrencyDetails.DenominationType = 'COIN') AND
(CurrencyDetails.Denomination = BHDCollectionsDet.Denomination)),
TEMP_TABLE2 AS
SELECT CollectionDate,Bankname,DSLIPS AS DSLIPS,SUM(BN) AS BN,SUM(COINS)AS COINS FROM TEMP_TABLE Group By CollectionDate,DSLIPS,Bankname
SELECT CollectionDate,Bankname,count(DSLIPS) AS DSLIPS,sum(BN) AS BN,sum(COINS) AS coins FROM TEMP_TABLE2 Group By CollectionDate,Bankname
HAVING COUNT(DSLIPS)<>0;Without seeing an execution plan of the query it is hard to suggest something useful. Try insert the result of UNION ALL to the temporary table and then perform an aggregation on that table, not a CTE.
Just
SELECT CollectionDate,Bankname,DSLIPS AS DSLIPS,SUM(BN) AS BN,SUM(COINS)AS COINS FROM
#tmp Group By CollectionDate,DSLIPS,Bankname
HAVING COUNT(DSLIPS)<>0;
Best Regards,Uri Dimant SQL Server MVP,
http://sqlblog.com/blogs/uri_dimant/
MS SQL optimization: MS SQL Development and Optimization
MS SQL Consulting:
Large scale of database and data cleansing
Remote DBA Services:
Improves MS SQL Database Performance
SQL Server Integration Services:
Business Intelligence
Maybe you are looking for
-
View button issue in BI publisher 101.3.4.0 and 10.1.3.4.1
Hi, Initially I had a BI Publisher 10.1.3.4.0 in OAS 10.1.3.4.0 that I sorted out from Oracle_Home\config\ias.properties file Then my clients were facing an issue with the View Button, when u'd want to print or generate reports in whichever available
-
PO query not giving correct values
Hi I am running the following query in PL?SQL Developer SELECT hou.name Operating_unit, pha.segment1 po_number, pha.revision_num, ap.vendor_name, hla1.location_code, papf.full_name Buyer, to_char(pha.creation
-
Is there anyway to limit the CPU usage of a zone reguardlesss of what the rest of the system is doing? I've just now started looking at the resource management capabilities and I see that I can reallocate CPU shares, but I'd like to say "ZoneA only g
-
Anchor Points and handles disappearing in Illustrator CC – Windows 8
Hi, I'm hoping someone can help. This is becoming a consistently re-occurring issue for me, and it's not specific to any particular file. The bounding box is visible, so I have a blue outline and blue "anchor points" at the end of each line, and I ca
-
Hi There, I want to update the Maintenance View so that the dependent tables must be updated as in SM30 transaction, rather by using Update statement. However can I update the maintenance view using the Update statement, as I am unable to sel