Antiquity of the Infocube data

Hi everybody, how could i see when was the first time the data was loaded to the Infocube or just the Infocube's data antiquity?
Thanx

Hi,
Check the table RSMONICDP.
In the parameter list, give the cube technical name in the <i>ICUBE</i> parameter. You will get request wise records.
In the time stamp field, you can get the data load date and time.
Regards,
Vivek V

Similar Messages

Delete access for the Infocube data

hi,
If you want to remove the delete access from the infocube , which change should be done to the security role. Please advise.
Thanks in advance...

Hi,
May be you can try this......
S_RS_ICUBE
          Activity                      - 03 (display), 23 (maintain), 63 (activate), 66 (refresh). Uncheck 06 (delete)
          Infocube subobject   - Choose as required....including DATA
          InfoArea & InfoCube - Choose as required.
Regards,
Murali.

Extraction of InfoCube data from BW system to non SAP system

Hello All,
Is the extraction of InfoCube data from BW system to non SAP system availbale only for BW 3.5 release ? If yes, how can we extract the InfoCube data to a non SAP system with SAP BW 3.1 ?
Hope to get some help.
Best Regards,
Loveline.

Hi Gianfranco,
Thanks for replying.
Yes I know that open hub service is the appropriate technique to extract data from the infocube.
But if we look at SAP Netweaver documentation : Prior to SAP NetWeaver '04(since the SAP BW release I am working is 3.1); We find that we have the option to extract to a DB table or flat file.
Now if we look at SAP Netweaver documentation : SAP NetWeaver '04; In addition to the above we have the option to extract to a non SAP system.
My requirment is to extract data from InfoCube to a non SAP system. The SAP BW release I am using is 3.1
Best Regards,
Loveline.

What is the use of the key date in filters in IP?

Hi all,
can anybody tell me what the key date on the filter in the planning modeler is good for? It seems to be always overwritten by either the key date in the query or the one set for the infocube in the planning modeler. Even if I don't set a key date for the latter two, the infocube date seems to be taken (I get the current day as query key date).
Or to put it this way: Where do I set my key date when I try to use time-dependent navigation attributes in a planning query? The infocube key date seems to take precedence, but I haven't found a way to derive my key date from the input-ready planning year variable in the query (exit or replacement path won't work).
Regards,
Tilman

Hi Indu,
many thanks already for your replies.
Do I understand you correctly that the key date on the filter will only have an effect when used in conjunction with planning functions (not queries)? I was going to use one filter both.
I turns out that my problem is rather how BI evalutates the key dates in the query/infocube/filter, and while I might not have the problem with planning functions, I do have it once I try to use key dates on an input-ready query. Since my key date needs to be derived from the planning year variable on-the-fly, only an exit variable used on the query's key date seems to be able to to this (variables in the infocube's key date get evaluated before the query's variable screen is displayed) . Unfortunately, it gets overwritten by whatever is set as key date in the infocube, and the filter's key date does not seem to matter at all.
Further, this seems to be a very IP-specific problem. Not only that normal reporting does only offer one key date (query), if you "manage" to break characteristic relations of your planning cube in a way that input-readiness is no longer provided, things work JUST AS DESIRED....The query's key date takes precedence, and time-dependent navigational attributes get displayed with their correct value.
This can't be right. I do not think that the case of having to use time-dependent navigational attributes in a planning query is rare, so I might have to open a ticket...
Regards,
Tilman

Loading performance of the infocube & ODS ?

Hi Experts,
Do we need to turn off the aggregates on the infocubes before loading so that it will decrease the loading time or it doesn't matter at all, I mean if we have aggregates created on the infocube..Is that gonna effect in anyway to the loading of the cube ? Also please let me know few tips to increase the loading performance of a cube/ods. Some of them are
1. delete index and create index after loading.
2. run paralled processes.
3. compression of the infocube , how does the compression of an infocube decrease the loading time ?
Please throw some light on the loading performance of the cube/ods.
Thanks,

Hi Daniel,
Aggregates will not affect the data loading. Aggregates are just the views similar to InfoCube.
As you mentioned some performance tuning options while loading data:
Compression is just like archiving the InfoCube data. Once compressed, data cannot be decompressed. So need to ensure the data is correct b4 Compressing. When you compress the data, you will have some free space available, which will improve data loading performance.
Other than the above options:
1.If you have routines written at the transformation level, just check whether it is tuned properly.
2.PSA partition size: In transaction RSCUSTV6 the size of each PSA partition can be defined. This size defines the number of records that must be exceeded to create a new PSA partition. One request is contained in one partition, even if its size exceeds the user-defined PSA size; several packages can be stored within one partition.
The PSA is partitioned to enable fast deletion (DDL statement DROP PARTITION). Packages are not deleted physically until all packages in the same partition can be deleted.
3. Export Datasource:The Export DataSource (or Data Mart interface) enables the data population of InfoCubes and ODS Objects out of other InfoCubes.
The read operations of the export DataSource are single threaded (i.e. sequential). Note that during the read operations u2013 dependent on the complexity of the source InfoCube u2013 the initial time before data is retrieved (i.e. parsing, reading, sorting) can be significant.
The posting to a subsequent DataTarget can be parallelized by ROIDOCPRMS settings for the u201Cmyselfu201D system. But note that several DataTargets cannot be populated in parallel; there is only parallelism within one DataTarget.
Hope it helps!!!
Thanks,
Lavanya.

Unable to view data in the InfoCube as well as in the query

Hi all,
I have done the Init Load into an InfoCube 0Pur_c01. The Monitoring status is Green. I checked the Qm status which is green. There is data in the PSA.
However, I am unable to view data in the InfoCube. Also when I execute the report I am receiving 'Application Data not found'error.
It looks to be a strange sitaution.
Please help me out
Regards
YJ

Hi,
I hope, some times the the unavailability of "PROCESSKEY" value for the records delivers like this.
Refer the note: 353042
And also refer the links:
Re: Problem extracting 2LIS_03_BX into 0IC_C03
Re: Records Not Added
And also search this forum with "PROCESSKEY"
With rgds,
Anil Kumar Sharma .P

InfoCube Modelling-Adding data from different ODS's on to the Infocube

Hi Experts,
I am new to SAP BI. I have a basic doubt on Modelling the InfoCube.
In our requirement, I have to populate data from 9 custom SAP Tables on to 9 ODS's. And, then take these data on to Infocubes.
And, they want to reduce the number of cubes as much as possible. So, I have to combine the data from different ODS's and build 2-3 Infocubes.
For Example.
I am going to combine 5 ODS's data on to 1 CUBE based on Delivery number...
there are 5 ODS with common key Delivery number. And, suppose I have added some set of fields from ODS1.
And, now when I add other set of fields from the second ODS, WHAT WILL HAPPEN TO THE 'Delivery Number' field ??
I will make it clear.
I have a record in CUBE already containing Fields- : Delivery no, field_a, field_b, field_c, field_d. Where the 'Delivery no =112333'. This record comes from ODS1.
Now, I want to add data data from ODS2, containg fields -: Delivery no, field_e, field_f, field_g, field_h.
And, what happens to the already existing record in CUBE with 'Delivery no = 11233'. ?
Will the value in this info-object get overwritten ?
OR.. will it combine the data from both the ODS's and show it as ONE record ???
Please advice ... How will I solve this scenario ?
Thanking You in Advance
Shyne Sasimohanan

Answer for your question and the suggestion.
the data will look like as given below
Delivery no, field_a, field_b, field_c, field_d, field_e, field_f, field_g, field_h
11233           1           1           1          1            0           0            0            0
11233          0           0          0             0           1           1           1          1
but the best way, according the design standards is creating another DSO on the top of all the DSO's and combine all the data in that DSO and send the data to Infocube. then the data will be shown as below.
Delivery no, field_a, field_b, field_c, field_d, field_e, field_f, field_g, field_h
11233           1           1           1          1            1           1           1          1
Regards,
Siva A

Format of Date field is loading wrongly in the Infocube 0pp_c01.

Hi,
Format of Date field is loading wrongly in the Infocube 0pp_c01. But it is loading properly into PSA.
I am loading data into PP infocubes from the following DataSources.(they all are 3.x datasources)
1. 2LIS_04_P_MATNR
2. 2LIS_04_P_ARBPL
3. 2LIS_04_P_COMP
The data is coming properly upto PSA. For example Actual Start date is loaded in cube like 733.884.
And, it is the same issue with all the cubes. So I checked the update rules. But, in it the mapping is done properly.
Thanks $ Regards
Shyne Sasimohanan
+91-9632674245

Hi,
HEre also value is loaded correctly. The reason u are seeing it in this format is because it is mapped into a key figure in the info cube.
It will store the value as number of days from a standard date like 1/1/1000 or 1/1/1900 - not sure which one of these, u should be able to search and find the correct date in the forums..but this is the logic behind it
Hope it helps.
Regards,
Rathy

How to write data in the Infocube using BI IP input ready functionality

Hi All,
Please help me in the following scenario...
Input given to me is-- ZCUBSDID cube with associated role ZSP_BW_SAI_BUDGETS-DID_ALL.
Query is ZR_V7_CO_PA_CH_PB_DID_BUDGET_2 based on agregation level ZALBSDID (& ZALBVDID) in infoarea ZDACOPA.
I have to write data in the cube by using Input-Ready functionality of BI IP. Can you please provide me step by step procedure for writing the data in the cube as i am very new in IP side.
Also if any further input required just let me know.
My Analysis-> I checked that cube is in Planning mode and in Query Designer>Property Pane-->Planning Pane, Query is in Change mode and also associated Keyfigures are in Input-Ready enabled.
Also i am able to access query in Analyzer.
This is very critical for me and need to provide solution asap. Please update asap. It really be great help.
Thanks & Regards
Rupali Singh

Hi,
To enter data in to planning cube through manual planning, you can do the following,
1. In a query that is used for manual planning, a cell is only input ready if each characteristic value of all the characteristics included in the aggregation level is unique. None of the aggregated values on the aggregation level are therefore input ready: Totals, subtotals and inner hierarchy nodes are not input ready.
2. To be able to change values for calculated key figures (like Average Price as a quotient of Amount and Quantity), these must be based on input-ready formulas, and at least one operand must be input ready. More information: Defining Inverse Formulas (Designtime) and Inverse Formulas (Runtime).
3. In order to change aggregated values (with respect to the aggregation level), these values must be disaggregated on all the data records that contribute to the aggregated value of the cell. More information: Disaggregation (Top-Down-Distribution).
4. If a query used for manual planning includes a navigation attribute that is restricted using a fixed or dynamic filter or a restricted key figure, the system treats the navigation attribute as a normal characteristic. The rule under point 1 applies here. The system only reacts as though the navigation attribute were not part of the query if the navigation attribute is not restricted.
5. In a query defined on a MultiProvider or a complex aggregation level that you want to use manual planning for, a cell is not input ready if the InfoProvider that is defined by this cell is:
a. Not a real-time InfoCube
b. A real-time InfoCube that has been switched to load mode
6. If an input-ready query is executed in change mode, but the requested data is locked by another user, the query starts in display mode.
For more details, you can refer to the following link,
http://help.sap.com/saphelp_nw70ehp1/helpdata/en/43/0c033316cd2bc4e10000000a114cbd/frameset.htm
Hope this helps you to solve your issue.
Regards,
Balajee

Problem loading data from the PSA to the InfoCube

Hello experts.
I'm having a problem loading data from the PSA to the InfoCube.
I'm using a DTP for this process but is happening the following error:
"Diagnosis
      An error occurred while executing the transformation rule:
      The exact error message is:
      Overflow converting from''
      The error was triggered at the point in the Following Program:
      GP4KMDU7EAUOSBIZVE233WNLPIG 718
System Response
      Processing the record date has Been terminated.
Procedure
      The Following is additional information included in the higher-level
     node of the monitor:
     Transformation ID
     Data record number of the source record
     Number and the name of the rule Which produced the error
Procedure for System Administration
Have already created new DTP's deactivate and reactivate the InfoCube, the transformation, but solves nothing.
Does anyone have any idea what to do?
Thank you.

HI,
Is it a flat file load or loading frm any data source?
try to execute the program GP4KMDU7EAUOSBIZVE233WNLPIG 718 in Se38 and check if its active and no syntax errors are there.
Check the mapping of the fileds in transformations weather
some data fileds are mapped to decimal or char 32 filed is mapped to Raw 16
or calweek, calmonth mapped to calday etc.
Check in St22 if there any short dumps ..
Regards
KP

Redundancy of data in the Infocube

Hi Friends,
We are facing a very strange problem......
In the target we are using two infoobjects 0DEBITOR and 0SOLD_TO......both are reffering to the same infoobject 0CUSTOMER.......so for both 0DEBITOR and 0SOLD_TO Master data table is same.....i.e. both r using Master data tables of 0CUSTOMER.......
But......0DEBITOR is directly mapped with the field KUNNR in the Transformation between the ODS and the datasource......but 0SOLD_TO is mapped with a customized field ZZSOLDTO............and there is customer exit in which depending on some conditions the value for the 0SOLD_TO will be fetched from the r/3.............so for every 0DEBITOR value the corresponding 0SOLD_TO field is not filled.......
In the Infocube we are using some Navigational Attributes both from the 0DEBITOR as well as from the 0SOLD_TO........
Now in the ODS Level data is fine..........but in Infocube there are redundancy of data...........and for that particular redundant record the request id field is empty.........for the other two records it is there........and also the Navigational Attributes related to the SOLD_TO are empty.......as well as the SOLD_TO itself is also empty...............bt these values should be there since it is there in the ODS level.........
No Start routine.....No End Routine...........No field level routine........
Could anyone put some light on this issue...............as per my understanding since both 0DEBITOR and 0SOLD_TO hitting the same Master data table it is causing the problem............if you think my analysis is ok..........then could you please explain it with an ex.......
Thanks in advance.......
Regards,
Debjani........

Hi ,
Please see in the manage of the cube whether you have any data present in the cube .Try checking the data in the cube without any selection and blank in the Field ( Max .No of hits ) and see whether you have data in the cube. And as said Above by Jerome you might not have any data corresponding to the Characterstics selections you have made.
And regarding SID selection and not getting the data, if you select SID you will see SID's maintained in the table and not the data b'coz you have only selected SID and not the characterstics.
Reward points only if helpful.
Hemant Khemani

Will data be updated in the infocube if char. are added after instalation

Will data be updated in the infocube if charecteristics are added after instalation? can any one help me.

Nag,
do you mean tat the IO is added to te cube after data has been loaded ? ( I am not sure if you can do this )
If it means customizing the delivered version of Business content , you will have to add te IO o the update rules as well , and add the same if required to the Transfer rules and data source to populate date.
BW is not that intelligent enough to realize what IOBJ you have added and how you want it filled without you specifying the same.
Arun
Assign points if helpful

0IC_C01 No data available in the infocube maintenance

Hi Experts,
Recently i've implemented Inventary. After loading Inventary stock, Material movements, Revaluations. I can't view data in the infocube contents.
Where i'm doing mistakes please share your ideas.
Siri

Hi Siri,
You mean to say that data laod was successful but you could'nt find records in the Infocube.What was the processing type you used in the Processing tab page?.
Try loading data from PSA manually if nothing works(Temporary solution only).
If there are any errors during dataload please do the appropriate corrections.
Regards,
Harold.

Steps for loading data into the infocube in BI7, with dso in between

Dear All,
I am loading data into the infocube in BI7, with dso in between. By data flow looks like....
Top to bottom:
InfoCube (Customized)
Transformation
DSO (Customized)
Transformation
DataSource (Customized).
The mapping and everything else looks fine and data is also seen in the cube on the FULL Load.
But due to some minor error (i guess), i am unable to see the DELTA data in DSO, although it is loaded in DataSource through process chains.
Kindly advise me, where did i miss.
OR .. Step by step instructions for loading data into the infocube in BI7, with dso in between would be really helpful.
Regards,

Hi,
my first impulse would be to check if the DSO is set to "direct update". In this case there is no Delta possible, because the Change log is not maintained.
My second thought would be to check the DTP moving data between the DSO and the target cube. If this is set to full, you will not get a delta. It is only possible to create one DTP. So if you created one in FULL mode you can't switch to Delta. Just create the DTP in Delta mode.
Hope this helps.
Kind regards,
Jürgen

The layout shows data that aren`t in the infocube

Hi.
I have created 3 layouts with BPS with one selection variable.
When I execute the layout, I filter trow the selection variable for one value that isn't in the infocube but the layout shows some records.
I have tried to remove the records form the layout but they shows again.
Any body can help me?
Thanks in advantage.

Hi Javier,
I see 3 possibilities to explain the system behaviour
1. You are using the combination proposal in the planning layout.
2. Some characteristics used in the rows are restricted to one value in the planning package (or level). In the area for new lines the system automatically print out these values to reduce the reduce the amount of work to fill new lines.
3. You are using the Excel In-Place and you have changed some formatting in the Layout Builder. There the system uses dummy data for a preview. Maybe your Excel template contains some of the dummy data. The system usually saves the Excel template without the dummy data but when formatting or the posistion of some column where changed the system might no know the new position to delete the dummy data, cf. documentation
http://help.sap.com/saphelp_nw70/helpdata/en/aa/f73e4045796913e10000000a1550b0/frameset.htm
You can check check the Excel template using transaction bdn1 or oaer (depending of
the release). Use class name = SEM_BPS, class type = OT and object key
= area_level_0-MP_layout where area, level, layout are the technical
names of the planning area, etc. You can display (and down-, upload the
Excel template). One can try to repair the Excel template or update
the layout with the master template and change the formats as suggested
in the documentation.
Regards,
Gregor

Antiquity of the Infocube data

Similar Messages

Maybe you are looking for