InfoCube Modelling-Adding data from different ODS's on to the Infocube

Hi Experts,
I am new to SAP BI. I have a basic doubt on Modelling the InfoCube.
In our requirement, I have to populate data from 9 custom SAP Tables on to 9 ODS's. And, then take these data on to Infocubes.
And, they want to reduce the number of cubes as much as possible. So, I have to combine the data from different ODS's and build 2-3 Infocubes.
For Example.
I am going to combine 5 ODS's data on to 1 CUBE based on Delivery number...
there are 5 ODS with common key Delivery number. And, suppose I have added some set of fields from ODS1.
And, now when I add other set of fields from the second ODS, WHAT WILL HAPPEN TO THE 'Delivery Number' field ??
I will make it clear.
I have a record in CUBE already containing Fields- : Delivery no, field_a, field_b, field_c, field_d. Where the 'Delivery no =112333'. This record comes from ODS1.
Now, I want to add data data from ODS2, containg fields -: Delivery no, field_e, field_f, field_g, field_h.
And, what happens to the already existing record in CUBE with 'Delivery no = 11233'. ?
Will the value in this info-object get overwritten ?
OR.. will it combine the data from both the ODS's and show it as ONE record ???
Please advice ... How will I solve this scenario ?
Thanking You in Advance
Shyne Sasimohanan

Answer for your question and the suggestion.
the data will look like as given below
Delivery no, field_a, field_b, field_c, field_d, field_e, field_f, field_g, field_h
11233           1           1           1          1            0           0            0            0
11233          0           0          0             0           1           1           1          1
but the best way, according the design standards is creating another DSO on the top of all the DSO's and combine all the data in that DSO and send the data to Infocube. then the data will be shown as below.
Delivery no, field_a, field_b, field_c, field_d, field_e, field_f, field_g, field_h
11233           1           1           1          1            1           1           1          1
Regards,
Siva A

Similar Messages

How to store as single record data coming from different ods to cube

Hi All,
we have the scenario like .
Same contract values are uploaded from 3 ods to cube.In the cube this information is stored as 3 different records.
Is there any option having same contract no and same fiscal period values should be stored as single record in cube.
Thanks in advance.
Regards,
Shradda.

Hi Shradda,
On Performance Side .....consider below points
1. Indexes on Cube ( That delete indexes before load and create them after Load ).
2. Aggregate Design ( Decision on Base Aggregates, roll up Hierarchy , BW Statistics etc ).
3. Partition of InfoCube ( Basically decision on No. of Partition )
4. Data Package Size ( Always try to have larger Data Package so that preaggreation will reduce the no. of Data Records ).
Best is Service.sap.com on BI page u will find material for performance . THat will help you .
To assign points on the left of screen u will get radio buttons for assigning points for each person who has responded .
Regards,
Vijay

Report using Data from different tables

Hello,
I am trying to convert a Cobol batch program to Oracle 6i tabular report.
The data is fetched from many different tables and there are lots of processing(i.e, based on the value of a column from one table need additional processing from different tables) required to generate the desired columns in the final report.
I would like to know what is the best strategy to follow in Oracle Reports 6i. I heard that CREATE GLOBAL TEMPORARY TABLE is an option. ( or REF CURSOR ?) I do not know much about its usage. Can somebody guide me about this or any other better way to achieve the result.
Thank you in advance
Priya

Hello,
There are many, many options available to you, each of which has advantages and disadvantages. This is why it is difficult to answer "what is best?" without alot more details about your specific circumstances.
In general, you're going to be writing PL/SQL to do any conditional logic that cannot be expressed as pure SQL. It can executed in the database, or it can executed within Reports itself. And most reports developers do some of both.
As a general rule, you want to send only the data you need from the database to the report. This means you want to do as much filtering and aggregating of the data as is readily possible within the database. If this cannot be expressed as plain SQL queries, then you'll want to create a stored procedures to help do this work.
Generally, the PL/SQL you create for executing within the report should be focused on control of the formatting, such as controlling whether a field is visible, or controlling display attributes for conditional formatting.
But these are not hard and fast rules. In some cases, it is difficult to get all the stored procedures you might like installed into the database. Perhaps the dba is reluctant to let you install that many stored procedures. Perhaps there are restrictions when and how often updates can be made to stored procedures in a production database, which makes it difficult to incrementally adjust your reports based on user feedback. Or perhaps there are restrictions for how long queries are allowed to run.
So, Reports offers lots of options and features to let you do data manipulation operations from within the report data model.
In any case, Oracle does offer temporary table capabilities. You can populate a temp table by running stored procedures that do queries, calculations and aggregations. And you can define and initiate a dynamic query statement within the database and pass a handle to this query off to the report to execute (ref cursor).
From the reports side, you can have as many queries as you want in the data model, arranged in any hierarchy via links. You can parameterize and change the queries dynamically using bind variables and lexicals. And you can add calculations, aggregations, and filters.
Again, most people do data manipulation both in the database and in Reports, using the database for what it excels at, and Reports for what it excels at.
Hope this helps.
Regards,
The Oracle Reports Team --skw

How to combine data from different input forms outside a nested iView

Hi,
i try to combine data from different input forms in a single one.
Because of space reasons in Flex compiling i already use nested iViews. Within these nested iViews its possible to use the 'combine' function to do this.
But in the main iView I cant compose these function with other elements. I need to do this because of using these model in Guided Procedures with output parameters. These parameters I only get with a 'endPoint'. Unfortunatly its not possible to combine data from different input forms into the 'endPoint'.
Is there any solution?
Thanx
Mathias

Hi Scott,
i tried this already and i also tried to map all parameters in the endpoint by drawing lines from the other forms and assign the 'empty parameters' by a formula.
And when i create a collable object in GP and assign the VC iView, only the parameters of the parent-form (the form who trigger the event) are shown as output-parameters.
Maybe any other ideas? I cant believe that such a simple thing is not possible?!?!
In my opinion, thats a bug, that I'am not able to use the combine-operator in the main VC-iView. Whats your mind?
greets
mathias

Data from different databases in the same report.

Hi Everyone,
I am trying to build a reconciliation report in which I need to show the data from the source and target, side by side.
Source and target are both different databases, although being oracle only
Whenever a new data model is created, it gets attached to a data source and in the report we need to choose a specific data model.
Can we have data from different databases in the same report ?

Yes, it is possible.
One way Is to use dataTemplates. There you can make queries from any number of different databases (The max I have done is 5).
It looks something like that:
<dataTemplate name="NameOfTemplate">
<dataQuery>
 <sqlStatement name="Q1" dataSourceRef="Connection1">
 <![CDATA[ select * from table1]]>
 </sqlStatement>
 <sqlStatement name="Q2" dataSourceRef="Connection2">
 <![CDATA[ select * from table2]]>
 </sqlStatement>
</dataQuery>
<dataStructure>
 <group name="RESULT1" source="Q1">
 <element name="P_FIRST_NAME" value="P_FIRST_NAME"/>
 </group>
 <group name="RESULT2" source="Q2">
 <element name="P_DATE" value="P_DATE"/>
 </group>
</dataStructure>
</dataTemplate>dataStructure is very important when you get data from different places, if you don't define those elements, then only the result from Q1 is shown.
The second possible way is to make as two different data models, each containing their own query and then set Main Data Set as concatenated SQL Data Source.
Best of luck,
Evelyn

Import data from few tables and export into the same tables on different db

I want to import data from few tables and export into the same tables on different database. But on the target database, additional columns have been added
to the same tables. how can i do the import?
Its urgent can anyone please help me do this?
Thanks.

Hello Junior DBA,
maybe try it with the "copy command".
http://download.oracle.com/docs/cd/B14117_01/server.101/b12170/apb.htm
Have a look at the section "Understanding COPY Command Syntax".
Here is an example of a COPY command that copies only two columns from the source table, and copies only those rows in which the value of DEPARTMENT_ID is 30:Regards
Stefan

How to compute data from different data sources?

All we are doing with data is from one single datasoure, which could be from oracle or sql server or a excel table, the issue is how could we combine these data from different data source with SQL?
Example: i need some data from Sale Table in Excel and some data from Custumer Table in oracle, how could SQL complete this mission? Solutions are welcomed and appreciated.
消息编辑者为：Datathinker from Raqsoft

Hi,
This forum is dedicated to SQL Developer Data Modeler product.
You might search for solution in general questions forum.

Unable to load data from an ODS to a Cube

Hi all,
I am traying to load data from an ODS to a cube, and I'm getting the following msg at the bottom of the screen monitor: "No corresponding requests were found for request REQU_BZUH9ZPYNL5XLQNB7K8IQDKFS in the ODS/Cube" Message no. RSBM043.
I am unable to load the data. The QM status is yellow. When the process starts, on the left hand of the monitor it shows: "0 of 84408 records" which is ok. I load that with this package before and it works well.
Can you help me what I have to do? I tried to wait but it was the same: no progress and no data in the cube.
Thank you very much and kind regards,
MM.
May be this helps...
When I look at the status, it says that I have a short dump at BW. It was CALL_FUNCTION_REMOTE_ERROR and the short text is "The function module "SUBST_TRANSFER_UPGEVAL" cannot be used for 'remote'". This short dump occurs very much before I shoot the upload.
Thanks again.

Hello MM,
Can you do the following..
make the Total status Red Delete the request from cube.
goto ODS -> Remove the Data Mart Status -> Try loading it again.
The error message that you get is common when we are trying to run a infopackage with the source object having no new request, (means all the requests available in the source are already moved to the targets). So please try the steps given above.
Hope it will help!

How to display multiple data from different table in one table? please help

Hi
I got sun java studio creator 2(the separate installation not the one in the net beans)....
My question is about displaying data that have been taken from the database.... I know how to display data in a table(just click on the table "bind data" )... but my question is that:
when i want to use a sql statement that taken the data from different table...
how can i display that data in the table(that will be shown in the web) ??? when i click bind data on the table i can only select one table i can't select more than one....
Note:
1) i'm using the rowset for displaying the data in the table, since the sql statement is depending on a condition(i.e. select a from b where c= ? )...
2) i mean by different table is that( i.e. select a from table1,table2 )..
thanks in advance...

Hi,
937440 wrote:
Hi every one, this is my first post in this portal. Welcome to the forum!
Be sure to read the forum FAQ {message:id=9360002}
I want display the details of emp table.. for that I am using this SQL statement.
select * from emp where mgr=nvl(:mgr,mgr);
when I give the input as 7698 it is displaying the corresponding records... and also when I won't give any input then it is displaying all the records except the mgr with null values.
1)I want to display all the records when I won't give any input including nulls
2)I want to display all the records who's mgr is null
Is there any way to incorporate to include all these in a single query..It's a little unclear what you're asking.
The following query always includes rows where mgr is NULL, and when the bind variable :mgr is NULL, it displays all rows:
SELECT *
FROM     emp
WHERE     LNNVL (mgr != :mgr)
;That is, when :mgr = 7698, it displays 6 rows, and when :mgr is NULL it displays 14 rows (assuming you're using the Oracle-supplied scott.emp table).
The following query includes rows where mgr is NULL only when the bind variable :mgr is NULL, in which case it displays all rows:
SELECT     *
FROM     emp
WHERE     :mgr     = mgr
OR      :mgr      IS NULL
;When :mgr = 7698, this displays 5 rows, and when :mgr is NULL it displays 14 rows.
The following query includes rows where mgr is NULL only when the bind variab;e :mgr is NULL, in which case it displays only the rows where mgr is NULL. That is, it treats NULL as a value:
SELECT     *
FROM     emp
WHERE     DECODE ( mgr
            , :mgr, 'OK'
            )     = 'OK'
;When :mgr = 7698, this displays 5 rows, and when :mgr is NULL, it displays 1 row.

How to load data from a ODS to CUBE Request ID - by - Request ID?

How to load data from a ODS to CUBE Request ID - by - Request ID?
The problem is that... some requests had been eliminated of the cube and the delta control between the ODS and CUBE was lost. The flag "data mart status of request" of all the requests of the ODS had been blank.
Now it is necessary to load some requests from the ODS for the cube.
Notes:
- it is not possible to make a complete load selecting the data to be loaded;
- the PSA is not being used;
- considering the data volume it is impracticable to reload the cube completely.
Thanks in advance,
Wesley.

Dear R B,
Considering the following:
-> the delta control was lost;
-> the data already are active in the ODS;
-> part of the data of the ODS already is in the cube.
The indicated procedure it only guarantees the load of the data that are in the ODS and that are not in the cube.
Tks,
Wesley.

Error while loading data from one ODS to anther ODS

Hi all,
while loading the data from one ODS to another ODS, we are getting error message - Error: No match found in target. No Space on ODS.
I have done a runstat on these tables of the ODS.. but the issue repeated.
Can anyone tell how do we solve this issue.

Check if you get any other Dump message in ST22 to see if it is due to some space availability in the DSO or underlying tables.
Or Post in detail if any other errore message is available.

How to insert data from different internal table into a data base table

hi all,
I want to insert a particular field in an internal table to a field in a data base table.Note that the fields in the internal table and database table are not of the same name since i need to insert data from different internal tables.can some one tell me how to do this?
in short i want to do something like the foll:
INSERT INTO ZMIS_CODES-CODE VALUE '1'.
*INSERT INTO ZMIS_CODES-COL1 VALUE DATA_MTD-AUFNR .(zmis_codes is the db table and data_mtd is the int.table)

REPORT ZINSERT.
tables kna1.
data: itab LIKE KNA1.
data lv_kUNAG LIKE KNA1-KUNNR.
lv_kuNAG = '0000010223'.
ITAB-kuNNR = lv_kuNAG.
ITAB-name1 = 'XYZ'.
INSERT INTO KNA1 VALUES ITAB.
IF SY-SUBRC = 0.
WRITE:/ 'SUCCESS'.
ELSE.
WRITE:/ 'FAILED'.
ENDIF.
Here lv_kunag is ref to kna1 kunnr passed in different name
In internal table .
Try and let me know if this logic dint work.

Select data from different database

hi,
may I know how to select data from different database?
for example,
I've 2 databases, OracleDB and OracleAR
Connect with OracleAR in SQL*Plus
select * from OracleDB.TableName
does Oracle support this kind of query?
how can I retrieve data from other database while im connecting with
other database?

Hi,
Yes, it's possible. No, your syntax won't work.
First of all you have to define a DATABASE LINK inside the DB where you are already connected (in this case OracleAR). Read docs how to do that.
Second thing is the query. It will look like
SELECT * from TableName@<NameOfDatabaseLink>Greetings,
Guido

Single query to get data from different databases

i need to capture certain fields from certain tables in database 1 and certain fields from certain tables in database 2 into one file using a single SQL statement.
i tried searching on the net
i found that dblinks can help
but iam not sure if ill be able to create dblinks in my situation which is:
i need to get data from oracle to be copied to mysql
this is not a replication acitivity, but i need certain fields from one database and certain from the other
so what iwas thinking is, if i use an sql query to get all the fields (i need around 40) from the different oracle databases and create a singlefile with one insert per select, i can then read that file into mysql
instead of creating multiple sql queries for each table and creating separate files and eventually separate tables in mysql.
can anyone help me here?
or maybe suggest another approach.
thanks

Hi,
I think dblink is the only option available to get data from different databases. It will work for your case too.
CREATE DATABASE LINK db_link CONNECT TO user_name IDENTIFIED BY password USING 'instance_name'you must have the system privilege 'create database link' to create db links. This way you can get the required data and put it in a table in oracle. But i dont know how to put this data from oracle table to Mysql.
HTH
Muneer

Retriving of data from different tables

retriving of data from different tables depening of the primary key this key field is there in all tables if it is there in one v table it should continue to other tables otherwise it should get exit from that it should display information message or otherwise success message if it is there in all tables .

Im writing the concept, just check it.
SELECT * from kna1 into lt_kna1.
if sy-subrc eq 0.
selest * from lfa1 into lt_lfa1
for all entries in lt_kna1.
endif.

InfoCube Modelling-Adding data from different ODS's on to the Infocube

Similar Messages

Maybe you are looking for