Any BAPI or FM to Use J1iS Tcode
Hi,
I am trying to create a excise invoice document Using J1is T-Code Is there is any Fm or BAPI to use the features of j1is T-code.
REGards,
S.JANANI
Hi Minami,
for chenge address use FM : BAPI_BUPA_ADDRESS_CHANGE (SAP BP, BAPI: Change Address)
otherwise check with below FM ,for address related information
BAPI_BUPA_ADDRESSES_GET SAP BP, BAPI: Determine All Addresses
BAPI_BUPA_ADDRESS_ADD SAP BP, BAPI: Add Address
BAPI_BUPA_ADDRESS_CHANGE SAP BP, BAPI: Change Address
BAPI_BUPA_ADDRESS_GETDETAIL SAP BP, BAPI: Read Address
BAPI_BUPA_ADDRESS_GET_NUMBERS SAP BP, BAPI: Read Address Numbers
BAPI_BUPA_ADDRESS_REMOVE SAP BP, BAPI: Delete Address
Regards,
Tutun
Similar Messages
-
Any BAPI or FM to use to update the Customer Address with change log?
Hi, does anyone have used any BAPI or FM that will update the customer address (Central Address management fields) and the change will be logged in the change history of customer master? I have tried several FM that can update the fields but none of the change will show up in the change history of the customer master.
So far, I have tried the following FM:
ADDR_MAINTAIN_COMPLETE
ADDR_UPDATE
BDC is not acceptable due to high volume of data. However, the change log is also required.
Please share any advice.
Thank you,Hi Minami,
for chenge address use FM : BAPI_BUPA_ADDRESS_CHANGE (SAP BP, BAPI: Change Address)
otherwise check with below FM ,for address related information
BAPI_BUPA_ADDRESSES_GET SAP BP, BAPI: Determine All Addresses
BAPI_BUPA_ADDRESS_ADD SAP BP, BAPI: Add Address
BAPI_BUPA_ADDRESS_CHANGE SAP BP, BAPI: Change Address
BAPI_BUPA_ADDRESS_GETDETAIL SAP BP, BAPI: Read Address
BAPI_BUPA_ADDRESS_GET_NUMBERS SAP BP, BAPI: Read Address Numbers
BAPI_BUPA_ADDRESS_REMOVE SAP BP, BAPI: Delete Address
Regards,
Tutun -
Advantages of using OPPQ tcode
Hi ,
We use OPPQ tcode to maintain MRP parametes with respect to a specific plant and we also have individual tcodes to maintain MRP paramters - like "MRP Controllers, Planning Horizon,Floats,Rescheduling etc". Is there any specific reason/advantages to use OPPQ tcode to maintain MRP parameters instead of using individual tcodes to maintain MRP parameters?. Thanks in advance.Using OPPQ we can copy the MRP parameters of an existing plant to a newly created plant in one-go.
If we know the parameters of an existing plant it makes sense to copy it directly through this txn instead of individual maintenance.Also any 'particular' data can be changed as per your requirement in the new plant easily.
Apart from the above advantage the 'reference plant' option in OPPQ helps us in reduced data maintenance w.r.to 4 parameters namely Plg cycle/Plg calendar/ROC profile/Rounding profile.
All we need is to create the data in reference plant which is then made available for the planning/new plant automatically. -
BAPI for clearing documents -Using Transaction F-44
Hi all,
Is there any BAPI which can be used for clearing docs using transaction F-44.
I have already seen threads on SDN for the same but couldn't find any BAPI.
Regards
TaranamI have the same question as you , please tell me if you had known , thanks !
Edited by: HB WANG on Mar 4, 2008 4:08 PM -
Hi,
Any BAPI is their for PCA Journal(Tcode 9KE0).
regards
MuthappanI don't see any documentation. You may have to hack the code.
Or raise an OSS message.
Rob
Message was edited by:
Rob Burbank -
Any BAPI or FM for GB01?
hi guys,
may i know is there any BAPI/ FM can be used to do GB01 transaction?
with multiple line item entry and final checking to make sure the document balance is zero.
thanks.Try BAPI_ACC_DOCUMENT_POST
-
Any BAPI or FM for Assessment cycle create 3KE1 tcode
Hi,
Any BAPI or Function module to create actual assessment cycle 3KE1 tcode.
i am doing BDC for that currently. Anybody done this please send the coding for this.
thanks
MuthappanHi Muthappan,
Could you please send me some sample code you used to create Assessment Cycle / Distribution Cycle using the function module.
Many Thanks in advance
Soumen -
Using XI(RF adapter) if i invoke any BAPI on R/3, then in XI i get to see a
Hello friends,
I am trying to acheive the folowign scenarion
My scenario is RFC XI --Soap , and the major problem i am facing is that, whenever i come accross any pdf's or documents or blogs related to my stuff , it always talks in very brief and i get stuck. the blog that you posted talks about some program Id , and i am not sure wht it is.
<b>And right now concentratin on XI -> RFC-> R/3 track,</b>
<b>Is it possible</b> that using XI(RF adapter) if i invoke any BAPI on R/3, then in XI i get to see all the Data returned by R/3 .
Like say a java application using JDBC invoking an sql on oracle and Java Application getting all the details.
If yes how will that data be visible in XI ?
Thanks & Regards,
Rohit Sharmaprogram id is something you specify in your SM59 while you create your destination, the same has to be given in your adapter also.
Have a look at this weblog which explains the same.
/people/michal.krawczyk2/blog/2005/03/29/configuring-the-sender-rfc-adapter--step-by-step
ALso if you are looking for a blog on RFC -> Webservices, check out /people/shabarish.vijayakumar/blog/2006/03/23/rfc--xi--webservice--a-complete-walkthrough-part-1
Message was edited by: Shabarish Vijayakumar -
Can any body tell me how to use the TCODE:ABF1 ?
Can any body tell me how to use the TCODE:ABF1 ?
Can any body tell me the different of the ABF1 and FB01?
Thank very much.Hi Jie,
both Transaction codes are working are same.
Both are working through program : SAPMF05A.
Packages are different: FIDC & AB.
FB01 : we can control objects through F_BKPF_BUK
Hope its clear.
Kishore K -
Any BAPI for tcode :FB50/FB50L
HI ,
is there any BAPI for tcode FB50 & FB50L.
POints will be rewarded
Thanks in advacnehi
List of all BAPIs
http://www.planetsap.com/LIST_ALL_BAPIs.htm
http://www.sappoint.com/abap/bapiintro.pdf
http://www.sappoint.com/abap/bapiprg.pdf
http://www.sappoint.com/abap/bapiactx.pdf
http://www.sappoint.com/abap/bapilst.pdf
http://www.sappoint.com/abap/bapiexer.pdf
http://service.sap.com/ale
http://service.sap.com/bapi
http://www.geocities.com/mpioud/Abap_programs.html
http://www.sapdevelopment.co.uk/reporting/reportinghome.htm
regards
ravish
<b>plz dont forget to reward points if helpful</b> -
There is Tcode CU51which is for Order BOM ,Is there any BAPI for OrderBOM.
Hi All,
There is Tcode CU51which is for Order BOM , So is there any BAPI for that Ordre BOM
pls can you help me
thanks
marsHi,
Refer These links:
https://forums.sdn.sap.com/click.jspa?searchID=13707386&messageID=5726376
https://forums.sdn.sap.com/click.jspa?searchID=13707605&messageID=4868211
Regards,
Shiva Kumar -
Is there any BAPI for QE51 Tcode?
Is there any BAPI for QE51 Tcode?
Hi,
I think there is no Bapi for this QE51.
Just check the fun Modules:
IEQCM_WORKLIST_CHECK
IEQCM_WORKLIST_REALIZE
IEQCM_WORKLIST_CONFIRM_STEP2
IEQCM_WORKLIST_DELETE
IEQCM_WORKLIST_GET_DETAIL
IEQCM_WORKLIST_GET_LIST
IEQCM_WORKLIST_SAVE
IEQCM_WORKLIST_UPDATE_MODULE
Regards,
Anji -
Any BAPI available for Tcode MSC2N
Hello,
Very Good Afternoon,
I need to change the few vlaues in the t-code MSC2N.
I need to change the City of Origin and Reg Of orign for few Batch numbers
in Basic Data1 tab.
There are around 1000 batch numbers which needs this change
Is there any BAPI available to go ahead..
Any suggestions will be appreciated.
Regards,
KittuHi, You can update classification for a batch using the following code.
But first, you'll need to find out that the batch management is cross-plant or plant dependant.
If it is cross plant then plant(WERKS) is not part of the key to BAPI_OBJCL_CONCATENATEKEY.
CLEAR: objectkey, objectkeytable, objectkeytable[],
allocvaluesnumnew, allocvaluesnumnew[],
return.
objectkeytable-key_field = 'MATNR'.
objectkeytable-value_int = matnr.
APPEND objectkeytable.
objectkeytable-key_field = 'CHARG'.
objectkeytable-value_int = charg.
APPEND objectkeytable.
* Only if Batch management is Plant dependant
objectkeytable-key_field = 'WERKS'.
objectkeytable-value_int = werks.
APPEND objectkeytable.
CALL FUNCTION 'BAPI_OBJCL_CONCATENATEKEY'
EXPORTING
objecttable = objecttable
IMPORTING
objectkey_conc = objectkey
TABLES
objectkeytable = objectkeytable
return = return.
allocvaluesnumnew-charact = "characteristic name goes here".
allocvaluesnumnew-value_from ="characteristic value goes here".
APPEND allocvaluesnumnew.
allocvaluesnumnew-charact = "characteristic name goes here".
allocvaluesnumnew-value_from = "characteristic value goes here".
APPEND allocvaluesnumnew.
CALL FUNCTION 'BAPI_OBJCL_CHANGE'
EXPORTING
objectkey = objectkey
objecttable = objecttable
classnum = classnum
classtype = classtype
* STATUS = '1'
* STANDARDCLASS = STANDARDCLASS
* CHANGENUMBER = CHANGENUMBER
* KEYDATE = SY-DATUM
* NO_DEFAULT_VALUES = ' '
* IMPORTING
* CLASSIF_STATUS = CLASSIF_STATUS
TABLES
allocvaluesnumnew = allocvaluesnumnew
allocvaluescharnew = allocvaluescharnew
allocvaluescurrnew = allocvaluescurrnew
return = return
* Do not forget to commit, otherwise changes would not take effect.
commit work.
Regards,
Hashir Ahmed -
Any BAPI or FM for transaction TP04
Dear all,
Please tell me are there any bapi or FM to create travel request.
Please help me.
Thanks and Regards,
ChandraI think you need to use BDC.
This BAPI is there - BAPI_TRIP_CREATE_FROM_DATA but it uses PR01.
Check following to find BAPI for any tcode -
1. Find out the package of the transaction.
Start Va01 go to system --> status.
Double click on transaction
Package is VA
Open this package in SE80
Open business engineering-->Business object types
Find the BO which sounds the most appropriate
I would suggest BUS2032 Sales Order
Double click.
Open methods.
Find the released method with from data or something similar in the name
, Createfromdat2
Position the cursor in it and click the program button
Scroll down to find the bapi used in this method
With this way you can also find out programs and FM's
2. Start va01 go to system-->status
Double click transaction VA01
Double click on package
Read the application component. (this is SD-SLS Sales)
Then open the transaction BAPI
Sales and distribution>Sales>sales order
createfromdat2
Regards,
Amit
\[removed by moderator\]
Edited by: Jan Stallkamp on Aug 6, 2008 2:26 PM -
Any bapi avaialble to fetch component planned orders for header planned ord
Hi Experts,
We have a req where we need to fetch component planned orders for header planned order .
In Detail :
In MD4C tcode (select planned orders tab -> F8 ), when i pass the header planned order like 17474 .
I get two component planned orders like 16276 16277 and corresponding materials like 12025185 , 12025189.
We are using BAPI_PLANNEDORDER_GET_DETAIL to fetch component materials for a planned order .
similarly any bapi or tables which have this data to fetch component planned orders.
Thanks in advance,
Mani.Hope it would be helpful for you:
Check these user exits.
CO610001 User exits: Assembly processing
M61X0001 User exits PP-MRP materials planning
M61X0002 User Exits PP-MRP Material Requirements Planning Evaluations
Thanks
Maybe you are looking for
-
Can't open Camera Raw (CR2) files in Photoshop CS3?
I can't seem to open Camera Raw CR2 files in Photoshop CS3, my CameraRaw plug in version says it's 4.6 - any help appreciated.
-
I started installing 3.6.8 several network computers. When I started firefox, I got the message from spybot that Win32.Cherche.us was found in file plugin-container.exe in the mozilla firefox directory. This is a rootkit and I will probably to re ins
-
The static field should be accessed in a static way
Hello, I am developing a java app in eclipse and I am getting the error message: The static field Calendar.DAY_OF_WEEK should be accessed in a static way I am trying to get the first day of the first week in the current month, here is my code: Gregor
-
Errors in the conexion indicates by the modem
24 errors for examples and more ever
-
Issues creating VSA cluster "Unknown value" error
Hi all, I'm in the process of evaluating vSphere with VSA and running into an issue during creation of the VSA cluster. On the final step of creating the VSA cluster, I get an error message "Cannot create VSA cluster: Unknown value." I'm setting up a