Errors in the conexion indicates by the modem
24 errors for examples and more ever
Hi David,
Did you end up resolving this? I've just come across the same error this morning (different cube reference though) and am beginning to look at the issue.
Cheers,
Lain
Similar Messages
-
Error 633: The modem (or other connecting device) is already in use or is not configured properly.
Hi all,
I recently got that a new USB CDMA modem which works fine on Windows 7 system but when I try connecting to my other laptop which runs on Windows 8.1, it keeps giving the error:
Error 633: The modem (or other connecting device) is already in use or is not configured properly. I've most of the links and solutions shared but none seems to work. I've generated diagnostic logs which are as follows. I interpreted some and most probably
it seems like an issue of incompatible driver, but does anyone else sees any issues in these diagnostic logs. Looking forward to your suggestions.
[4724] 06-01 20:01:56:314: ENTRY: Reading "Reliance Netconnect+"
[4724] 06-01 20:01:56:315:
Before LoadPortsList2 in ReadEntryList()
[4724] 06-01 20:01:56:315: LoadPortsList2
[4724] 06-01 20:01:56:315: GetRasPorts
[4724] 06-01 20:01:56:315: RasPortEnum...
[4724] 06-01 20:01:56:315: RasPortEnum=603,c=10
[4724] 06-01 20:01:56:315: RasPortEnum...
[4724] 06-01 20:01:56:315: RasPortEnum=0,c=10
[4724] 06-01 20:01:56:315: RasGetDevConfig
[4724] 06-01 20:01:56:316: RasGetDevConfig=603
[4724] 06-01 20:01:56:316: RasGetDevConfig
[4724] 06-01 20:01:56:316: RasGetDevConfig=0
[4724] 06-01 20:01:56:316: SanitizeUnimodemBlob: mdm prot=0
[4724] 06-01 20:01:56:316: Port=COM17,fHw=0,fEc=0,bps=921600,fSp=0,prot=0
[4724] 06-01 20:01:56:316: StringCchCopy failed due to error 0x8007007a
[4724] 06-01 20:01:56:317: LoadPortsList=0
[4724] 06-01 20:01:56:317: successfully finished LoadPortsList2 in ReadEntryList()
[4724] 06-01 20:01:56:317: Reading media group "serial"
[4724] 06-01 20:01:56:317: New link format
[4724] 06-01 20:01:56:317:
DUPTEST:Port in this media
[4724] 06-01 20:01:56:317: Port=COM17
[4724] 06-01 20:01:56:317:
Trying to match the phonebook port in the system ports
[4724] 06-01 20:01:56:318: Port configured
[4724] 06-01 20:01:56:318: SetDefaultModemSettings(bps=921600)=1
[4724] 06-01 20:01:56:318: Reading device group "modem"
[4724] 06-01 20:01:56:318: Device List after deleting dupe
[4724] 06-01 20:01:56:318: StringCchCopy failed due to error 0x8007007a
[4724] 06-01 20:01:56:318: Fix entry type, 0 to 1
[4724] 06-01 20:01:56:318: Device List after deleting dupe
[4724] 06-01 20:01:56:318: ReadRasFile: ReadEntryList returned 0
[4724] 06-01 20:01:56:318: RASSQM: In ReadPhonebookFile Number of myuse profiles set 1
[4724] 06-01 20:01:56:318: ReadPhonebookFile returns 0
[4724] 06-01 20:01:56:318: RasGetAutodialAddressW
[4724] 06-01 20:01:56:318: RasGetAutodialAddressW
[4724] 06-01 20:01:56:318: DwEnumEntryDetails done. 0
[4724] 06-01 20:01:56:318: RasGetEntryPropertiesW
[4724] 06-01 20:01:56:318: IsRasmanServiceRunning=1
[4724] 06-01 20:01:56:318: IsRasmanServiceRunning=1
[4724] 06-01 20:01:56:318: GetPbkAndEntryName
[4724] 06-01 20:01:56:318: ReadPhonebookFileEx: called for pbk C:\Users\lavi\AppData\Roaming\Microsoft\Network\Connections\Pbk\rasphone.pbk, flags 8
[4724] 06-01 20:01:56:318: IsPublicPhonebook=0
[4724] 06-01 20:01:56:318: path=C:\Users\lavi\AppData\Roaming\Microsoft\Network\Connections\Pbk\rasphone.pbk
[4724] 06-01 20:01:56:318: full path=C:\Users\lavi\AppData\Roaming\Microsoft\Network\Connections\Pbk\rasphone.pbk
[4724] 06-01 20:01:56:318: IsVirtualizationNeeded: return value = 0
[4724] 06-01 20:01:56:319: ENTRY: Reading "Reliance Netconnect+"
[4724] 06-01 20:01:56:319:
Before LoadPortsList2 in ReadEntryList()
[4724] 06-01 20:01:56:319: LoadPortsList2
[4724] 06-01 20:01:56:319: GetRasPorts
[4724] 06-01 20:01:56:319: RasPortEnum...
[4724] 06-01 20:01:56:319: RasPortEnum=603,c=10
[4724] 06-01 20:01:56:319: RasPortEnum...
[4724] 06-01 20:01:56:319: RasPortEnum=0,c=10
[4724] 06-01 20:01:56:319: RasGetDevConfig
[4724] 06-01 20:01:56:320: RasGetDevConfig=603
[4724] 06-01 20:01:56:320: RasGetDevConfig
[4724] 06-01 20:01:56:320: RasGetDevConfig=0
[4724] 06-01 20:01:56:320: SanitizeUnimodemBlob: mdm prot=0
[4724] 06-01 20:01:56:320: Port=COM17,fHw=0,fEc=0,bps=921600,fSp=0,prot=0
[4724] 06-01 20:01:56:320: StringCchCopy failed due to error 0x8007007a
[4724] 06-01 20:01:56:322: LoadPortsList=0
[4724] 06-01 20:01:56:322: successfully finished LoadPortsList2 in ReadEntryList()
[4724] 06-01 20:01:56:322: Reading media group "serial"
[4724] 06-01 20:01:56:322: New link format
[4724] 06-01 20:01:56:322:
DUPTEST:Port in this media
[4724] 06-01 20:01:56:322: Port=COM17
[4724] 06-01 20:01:56:322:
Trying to match the phonebook port in the system ports
[4724] 06-01 20:01:56:322: Port configured
[4724] 06-01 20:01:56:322: SetDefaultModemSettings(bps=921600)=1
[4724] 06-01 20:01:56:322: Reading device group "modem"
[4724] 06-01 20:01:56:322: Device List after deleting dupe
[4724] 06-01 20:01:56:322: StringCchCopy failed due to error 0x8007007a
[4724] 06-01 20:01:56:322: Fix entry type, 0 to 1
[4724] 06-01 20:01:56:322: Device List after deleting dupe
[4724] 06-01 20:01:56:322: ReadRasFile: ReadEntryList returned 0
[4724] 06-01 20:01:56:322: RASSQM: In ReadPhonebookFile Number of myuse profiles set 1
[4724] 06-01 20:01:56:322: ReadPhonebookFile returns 0
[4724] 06-01 20:01:56:322: DuplicatePhoneNode
[4724] 06-01 20:01:56:322: GetPbkAndEntryName. rc=0x0
[4724] 06-01 20:01:56:322: GetInstalledProtocolsEx=0xc.
[4724] 06-01 20:01:57:690: DwEnumEntryDetails
[4724] 06-01 20:01:57:690: IsRasmanServiceRunning=1
[4724] 06-01 20:01:57:690: IsRasmanServiceRunning=1
[4724] 06-01 20:01:57:690: ReadPhonebookFileEx: called for pbk C:\ProgramData\Microsoft\Network\Connections\Pbk\rasphone.pbk, flags 8
[4724] 06-01 20:01:57:690: IsPublicPhonebook=1
[4724] 06-01 20:01:57:690: path=C:\ProgramData\Microsoft\Network\Connections\Pbk\rasphone.pbk
[4724] 06-01 20:01:57:690: full path=C:\ProgramData\Microsoft\Network\Connections\Pbk\rasphone.pbk
[4724] 06-01 20:01:57:690: IsVirtualizationNeeded: return value = 1
[4724] 06-01 20:01:57:690: GetLUAPhonebookPath: Return value 0 hiddenpbk path C:\Users\lavi\AppData\Roaming\Microsoft\Network\Connections\Pbk\_hiddenPbk\rasphone.pbk
[4724] 06-01 20:01:57:690: ReadRasFile: ReadEntryList returned 0
[4724] 06-01 20:01:57:690: SyncMasterPhonebookFile:++
[4724] 06-01 20:01:57:690: IsPublicPhonebook=1
[4724] 06-01 20:01:57:690: path=C:\ProgramData\Microsoft\Network\Connections\Pbk\rasphone.pbk
[4724] 06-01 20:01:57:690: full path=C:\ProgramData\Microsoft\Network\Connections\Pbk\rasphone.pbk
[4724] 06-01 20:01:57:690: FindFirstFile failed with 0x2
[4724] 06-01 20:01:57:690: ReadRasFile: File C:\ProgramData\Microsoft\Network\Connections\Pbk\rasphone.pbk does not exist
[4724] 06-01 20:01:57:690: DeleteEntriesOnlyInHiddenPhonebookFile ++
[4724] 06-01 20:01:57:690: WritePhonebookFile
[4724] 06-01 20:01:57:690: ModifyEntryList: Number of connections written 0
[4724] 06-01 20:01:57:690: RASSQM: In WritePhonebookFile Number of alluser profiles set 0
[4724] 06-01 20:01:57:690: DeleteEntriesOnlyInHiddenPhonebookFile : WritePhonebookFile failed with 0
[4724] 06-01 20:01:57:690: RASSQM: In ReadPhonebookFile Number of alluser profiles set 0
[4724] 06-01 20:01:57:690: ReadPhonebookFile returns 0
[4724] 06-01 20:01:57:691: IsRasmanServiceRunning=1
[4724] 06-01 20:01:57:691: IsRasmanServiceRunning=1
[4724] 06-01 20:01:57:691: ReadPhonebookFileEx: called for pbk C:\Users\lavi\AppData\Roaming\Microsoft\Network\Connections\Pbk\rasphone.pbk, flags 8
[4724] 06-01 20:01:57:691: IsPublicPhonebook=0
[4724] 06-01 20:01:57:691: path=C:\Users\lavi\AppData\Roaming\Microsoft\Network\Connections\Pbk\rasphone.pbk
[4724] 06-01 20:01:57:691: full path=C:\Users\lavi\AppData\Roaming\Microsoft\Network\Connections\Pbk\rasphone.pbk
[4724] 06-01 20:01:57:691: IsVirtualizationNeeded: return value = 0Hi,
We could get more information about your problem through this log. While, for your problem, first of all, it would be better to contact USB Modem manufacture to confirm its compatibility with Windows edition.
After that, make sure its driver was upgraded to be latest.
Roger Lu
TechNet Community Support -
SP A10-Error 633: The modem is not installed or configured for Dial-Up
Ive already reformatted the hard drive and used the utilities CD to install the modem driver again. Anyone got any advice on how to solve problem? Would an external modem solve it?
By the way it is a satellite pro A10Hello
If the HDD is formatted use the recovery CD and reinstall OS. After that the modem should be recognized and installed properly. After that configure Dial up connection and check the modem. If the modem is not defective it should work.
The strange thing is that there is error 633 that means: The port is already in use or is not configured for Remote Access dialout.
Please check this interesting site http://www.modemsite.com/56k/duns633.asp .
If there is no success please write again.
Bye -
MY USB modem will not connect to the Internet. The modem appears active on either USB ports and an IP address is assigned. The interface between the modem appears to be the problem. Any ideas?
mcaila wrote:
Update: I called my ISP (Verizon) and they were not much help.
What did have you do if anything?
I also tried to connect with an ethernet cord, and that too is not working.
What were the results from the Network Diagnostic test when connected by ethernet?
I've been searching online for hours and have found no solution that has worked.
What were those solutions that did not work other than what you already mentioned? -
Hello. I am using a ZTE 3G modem. Whenever I connect to internet, Sometimes during browsing or downloading it disconnects with the error message, "You were disconnected by the PPP server. Try reconnecting." There is no problem with the modem. Last few months, I have used it with Mac OS X Mavericks. There was no problem. Some days ago, I downgrade to Mac OS X 10.8.3, because I was fed up with different bugs in 10.9. Anyway, the first two days the connection were fine. But, after that, The problem began from no where. I tryed everything i could, but, It didn't help.
Please, help me out. It's very disturbing frequanlty disconnection. I am mad at the PPP is like, if I found standing it in front of me, I would beat it with a bat, who gave this so called Mr. PPP permission to disconnect my connection as it's wish!Hi I'm having same issue since last week and now unable to reconnect. Not sure if it's an issue with the mobile company, modem or apple .
Before was able to connect eventually now connects and drops connection after 3 seconds . Using macbookpro early 2014 mavericks all ipdate - modem 4G Huawei
Haven't found any info to assist us
Hope someone comes forward soon
Thanks and good luck ! -
There was an error joining the network usr5450
Hello,
my girlfriend today bought her first mac. An iMac 20" C2D.
She was uncertain about it because she's a long time windows user but in the end she decided to switch to osx, oh happy day.
At first boot there was immediately a problem. The iMac could see the wireless network (usr5450 access point) but when it tries connecting to it after 20 secs it gives this error message: "There was an error joining the network usr5450".
So we decided to skip the network setup it during first boot and to do it later inside osx with more options.
NO WAY.
I'm clueless.
The network is NOT protected by wep or wpa (her sister's new out of the box vista/vaio connected immediately...oh, the horror!) and I was able to connect with my macbook pro automatically.
Every computer in her house connect wirelessly without problems execpt her new iMac.
I run an hardware test. Passed without errors.
We installed Osx update combo 10.4.9 and AirPort Extreme Update 2007-002. No change.
The network is like that: modem-dlink switch-us robotics 5450 access point.
Please, she's already regretting buying a mac, any help would be very appreciated.
ThanksWelcome to Discussions, Riell!
Check to see if there is a firmware update available for the router.
The "there was an error" message you saw usually indicates something in the combination of the password and security method selected was not entered accurately or could not be accepted for some reason.
First, turn on AirPort using its menu bar icon.
Then open the Network panel of System Preferences. Click the "Assist me..." button at the bottom and click the blue "Assistant..." button in the drop-down box. This will open the Network Setup Assistant. Click the "Continue" button, then target "I use AirPort" and continue on to setup this new "location" within your iMac's Network perferences. Does this work for you? If not, what message do you get, or where do you run into a roadblock? -
Can't install itunes - error message "the folder "itunes" cannot be found
Help. I just bought a new Iphone and can't get itunes to load. I had itunes on my computer for several years for my nano - haven't synced up in about a year. Went to open it and got the following error message
The folder "itunes" cannot be found or created and is required. The default location for this folder is inside Mu Music folder"
I have uninstalled everything - quicktime, apple mobile, every single file. I have rebooted, run searches to make sure there were no files at all left - did it through control panel, search etc., rebooted and downloaded it again (this make about 5 times now) and still get that same message that the folder cannot be found. Help! I just blew about $400 in the Apple store!
Can anyone help me?For general advice see Troubleshooting issues with iTunes for Windows updates.
The steps in the second box are a guide to removing everything related to iTunes and then rebuilding it which is often a good starting point unless the symptoms indicate a more specific approach. Review the other boxes and the list of support documents further down the page in case one of them applies.
Your library should be unaffected by these steps but there is backup and recovery advice elsewhere in the user tip.
tt2 -
Help. DSL drops connection all the time, is it the modem? (westell 327W)
Pardon me because I'm not so tech aware, and so don't know what to do to try to find a solution. We lose our internet connection a lot. It seems to happen in spurts: last night we couldn't connect at all, today it was bad in the morning but now I've been on for about a half an hour and all seems good. I can't figure out any pattern. Last weekend we were fine all weekend, during the week it was bad every single day.
I connect through a desktop and the westell modem; upstairs we connect with a laptop and wireless. The connection problems happen in both places, although it's our housemates who connect upstairs through the wireless and so I'm not entirely sure if they have problems when we're having problems or not (this has been going on for so many months, we've all kind of adapted to it. but it's more and more frustrating). Our wireless is encrypted.
When we can't connect, we get the Explorer 'cannot find website because you are not connected to the internet' error page. Even when we can't connect, the "local area connections" icon on the lower right side of the screen (Windows XP) says we have a network connection at 10.0 mbs. The lights on the modem are all green, and the DSL light stays steady green, although sometimes the internet light will blink erratically, and the wireless light always blinks quickly. We recently switched out the cable to the jack, so it's not that.
Sometimes we can get it to get back a connection briefly by doing one of these things (but they don't always work):
- use the "repair" button on the local area connections window support tab -- this will often get it back for a few minutes but is rarely permanent. When it doesn't work, it usually says it's because it can't renew the IP address
- turn the modem on and off. That's what worked this morning. It did not work last night.
- turn the computer on and off. That worked last night only to get an initial connection that then pooped out.
- use the verizon support popup that sometimes (and only sometimes) appears when we're having connectivity problems. This morning that worked briefly -- the internet connection popped back up at the stage where the pop up siad "testing connection."
Any idea what is going on here? I tried a couple months ago to get help through verizon online support, and it ended up as a 3 hour phone call to India that resolved things only for an afternoon, and not on any more long term basis, and I don't want to do that again unless I know what I'm asking for (since all they do is go through some kind of checklist).I had similar probelm. I did find dns lookup is very slow. The following are consecutive tests:
C:\Users\pchen>nslookup www.verizon.net
Server: dslrouter
Address: 192.168.1.1
Non-authoritative answer:
Name: www.verizon.net.westell.com
Addresses: 63.251.179.13
8.15.7.117
C:\Users\pchen>nslookup www.verizon.com
Server: dslrouter
Address: 192.168.1.1
DNS request timed out.
timeout was 2 seconds.
Non-authoritative answer:
Name: a1280.g.akamai.net
Addresses: 205.177.69.56
205.177.69.66
Aliases: www.verizon.com
www.verizon.com.edgesuite.net
C:\Users\pchen>nslookup www.google.com
Server: dslrouter
Address: 192.168.1.1
Non-authoritative answer:
Name: www.google.com.westell.com
Addresses: 63.251.179.13
8.15.7.117
C:\Users\pchen>nslookup www.bloomberg.com
Server: dslrouter
Address: 192.168.1.1
DNS request timed out.
timeout was 2 seconds.
DNS request timed out.
timeout was 2 seconds.
DNS request timed out.
timeout was 2 seconds.
*** Request to dslrouter timed-out
-- when I got disconnected from internel (even westel 327w showsInternet Status: Connected DSL link: Connected Speed (Down/Up): 3356 Kbits/sec by 843 Kbits/sec Connection Type: PPP -
Wow, I tried to submit this as a problem and the computer lost the wifi connection again, so i lost the whole explanation i typed up.
I've turned off computer and modem multiple times.
When I tried to run the network diagnostic, the macbook pro gave me a "perhaps you are out of range error". I am sitting next to the modem.
My iphone and ipad are wonderfully connected to the home wifi network, so it cannot be the modem/router, correct?
If I am on the same floor as the router/modem then the macbook pro can see my home network but after tyoing in my password and trying to connect i get a "timed out" message.
If I move down one floor, then the macbook can see and connect to the wifi. I only have one modem on one floor.
Is there some sort of diagnostic I can run to see why this particular device (macbook pro) is behaving ths way? It just seems weird because the computer could connect to the wifi network yesterday while i was sitting next to the router.SOLUTION!
I've been suffering from this problem for a few months. I tried everything suggested by everyone, and then, today, I had a mad idea.
I used to work in a room in the house that's about 12 metres away from the router. It's on the next storey up and horizontally about 8 metres away. The problem started when I began to work in the same room as the router.
Today I became so frustrated that for some reason I walked into a room about 8 metres away on the same level - Guess what? I connected with no problem at all. Feeling full of joy I walked back to the room where the router is located - Dropped internet connection within a few minutes! Walked back to the the room that's 8 metres away and, hey presto! I have a connection. I now realise that the problem was that I moved too close to the router.
I can think of no logical explanation for my experience, but empirically it seems to work. Does anyone have the faintest idea of why this should be the case? In the absence of an answer I think I may have to start believing in fairies at the bottom of the garden - I'm just off to set a meal for them.
By the way, I don't know if it has any significance, but the router is a BT Infinity router that has replaced the incredibly unreliable Virgin Media cable connection -
Hi
I am getting the below error in the below sql
Hi
I am getting the error in the below sql
DECLARE
pgm_id NUMBER := &1;
schd_dt DATE := TO_DATE('&2','MM/DD/YYYY');
l_schd_dt DATE := NULL;
l_pgm_id NUMBER :=0;
l_src_id NUMBER;
l_bulkCollectSize NUMBER;
l_trace_level NUMBER := 0;
l_CommitAllowance INFT1.PRM_VALUE%TYPE;
v_insrcdcnt NUMBER := 0;
g_ErrorString VARCHAR2(500) := NULL;
g_log_error VARCHAR2(300) := NULL;
g_recs_upd NUMBER :=0;
g_recs_ins NUMBER :=0;
g_aud_upd_ts DATE := NULL;
l_data_nbr NUMBER := 0;
l_ts_1 DATE :=NULL;
l_ts_2 DATE :=NULL;
l_rest_empno emp_STG.mbr_nbr%TYPE :='0';
l_Commitsize NUMBER;
CURSOR curTrnRecs(l_rest_empno VARCHAR)
IS
SELECT /* user_hash(tmp) PARALLEL(tmp,8) */ tmp.sec_lbl
,tmp.empno
,tmp.ename
,tmp.sal
,tmp.deptno
FROM emp_stg tmp where tmp.mbr_nbr > l_rest_empno order by tmp.mbr_nbr;
TYPE rec_emp_stg is TABLE OF emp_STG%ROWTYPE index by PLS_INTEGER;
stg_emp_stg rec_emp_stg ;
counter NUMBER :=0;
l_idx NUMBER;
errors PLS_INTEGER;
ins_errors EXCEPTION;
PRAGMA EXCEPTION_INIT(ins_errors, -24381);
BEGIN
/* Copy values into local variables */
l_pro:= pgm_id;
l_schd_dt := schd_dt;
/* Check if this is the first execution of the program; Get the last processed timestamp if the run is a restart */
/* The restartability of this program is slightly differnt. Data_nbr =1 indicates that the last run was successful. The same program can*/
/* be called multiple times for the same t47date. The restartability is designed accordingly */
BEGIN
SELECT /* SQL_TAG(<$RCSfile: t50lyt_can_hist_trans_load.sql,v $><2>) */
data_nbr,1,1,
NVL(key_text,'0')
INTO l_data_nbr,
l_ts_1,
l_ts_2,
l_rest_mbr_nbr
FROM inft
WHERE TRUNC(key_ts)=TRUNC(l_schd_dt)
AND pro_id = l_pro_id;
EXCEPTION
WHEN NO_DATA_FOUND THEN
l_data_nbr:=9;
NULL;
WHEN OTHERS then
g_ErrorString := g_log_error||' : SQLCODE = '||SQLCODE||' , ERRORMESSAGE = '||substr(SQLERRM, 1,200);
RAISE;
END;
IF l_data_nbr = 1 THEN
crm_msg.msg('Exiting:: Program already run');
RETURN;
ELSIF l_data_nbr = 0 THEN
crm_msg.msg('This is a restart for the date '||l_schd_dt);
ELSIF l_data_nbr= 9 THEN
crm_msg.msg('First execution of this program');
END IF;
BEGIN
if l_data_nbr =9 THEN
crm_msg.msg('This is the First execution of this program');
INSERT
INTO inft
pgm_id,
key_ts,
key_text,
data_nbr,
data_ts,
data_text
VALUES
l_pro,
l_schd_dt,
0, --to hold empno
sysdate,
0 --no of recs processed
COMMIT;
END IF;
END;
OPEN curTrn(l_rest_empno);
LOOP
BEGIN
FETCH curTrn BULK COLLECT INTO stg_emp_rec LIMIT 50000;
IF nvl(curTrnRecs%ROWCOUNT,0)=0 THEN
crm_msg.msg('No Historical Data');
END IF;
FORALL i in 1..stg_emp_rec.COUNT SAVE EXCEPTIONS
INSERT INTO emp values stg_emp_stg(i);
counter := counter + 1;
g_recs_ins := g_recs_ins+SQL%ROWCOUNT;
EXCEPTION
WHEN ins_errors THEN
errors := SQL%BULK_EXCEPTIONS.COUNT;
for j in 1..errors
LOOP
l_idx :=sql%bulk_exceptions(j).error_index;
UPDATE emp SET src_id=stg_emp_rec(i).empno,ename=stg_emp_rec(i).ename,sal = stg_emp_rec(i).sal,
WHERE deptno= stg_emp_rec(i).deptno;
g_recs_upd := g_recs_upd + SQL%ROWCOUNT;
---END;
-- EXIT WHEN curTrnRecs%NOTFOUND;
-- END LOOP;
-- CLOSE curTrnRecs;
EXCEPTION
WHEN OTHERS THEN
g_ErrorString := g_log_error||' : SQLCODE = '||SQLCODE||' , ERRORMESSAGE = '||substr(SQLERRM, 1,200);
crm_msg.msg(g_ErrorString);
RAISE;
END;
END
IF (counter >= l_CommitSize) THEN
BEGIN /* To keep track of the timestamp of the last record processed inthe batch; for restartability */
UPDATE inft
SET data_ts = SYSDATE
,key_text = l_empno (idx)
WHERE pgm_id = l_pgm_id
AND TRUNC(key_ts)= TRUNC(l_schd_dt);
COMMIT;
counter:=0;
END IF;
EXCEPTION
WHEN OTHERS THEN
g_ErrorString := g_log_error||' : SQLCODE = '||SQLCODE||' , ERRORMESSAGE = '||substr(SQLERRM, 1,200);
crm_msg.msg(g_ErrorString);
RAISE;
END;
COMMIT;
EXIT WHEN curTrn%NOTFOUND;
-- END LOOP; --End of looping for the main cursor fetch
END LOOP;
CLOSE curTrn;
BEGIN /* Update the data_nbr to 1 to indicate the update is complete */
UPDATE inft
SET data_nbr=1,
data_ts=nvl(g_aud_upd_ts,data_ts),
data_text = counter
WHERE pro_id = l_pgm_id
AND TRUNC(key_ts)=TRUNC(l_schd_dt);
COMMIT;
EXCEPTION
WHEN OTHERS THEN
g_ErrorString := g_log_error||' : SQLCODE = '||SQLCODE||' , ERRORMESSAGE = '||substr(SQLERRM, 1,200);
crm_msg.msg(g_ErrorString);
RAISE;
END;
g_log_error := 'LOGGING SUMMARY';
crm_msg.msg_tab('RECS UPDATED',g_recs_upd);
crm_msg.msg_tab('RECS INSERTED',g_recs_ins);
crm_msg.msg('Program ends Successfully');
EXCEPTION
WHEN OTHERS THEN
g_ErrorString := g_log_error||' : SQLCODE = '||SQLCODE||' , ERRORMESSAGE = '||substr(SQLERRM, 1,200);
crm_msg.msg(g_ErrorString);
END;
Elapsed: 00:00:00.00
EXCEPTION
ERROR at line 248:
ORA-06550: line 248, column 3:
PLS-00103: Encountered the symbol "EXCEPTION" when expecting one of the following:
( begin case declare end exit for goto if loop mod null
pragma raise return select update when while with
<an identifier> <a double-quoted delimited-identifier>
<a bind variable> << continue close current delete fetch lock
insert open rollback savepoint set sql execute commit forall
merge pipe purge
ORA-06550: line 255, column 5:
PLS-00103: Encountered the symbol "IF" when expecting one of the following:
ORA-06550: line 314, column 2:
PLS-00103: Encountered the symbol "EXCEPTION" when expecting one of the following:
( begin case declare end exit for goto if loop mod null
pragma raise return select update while with <an identifier>
<a double-quoted delimited-
ORA-06550: line 322, column 0:
PLS-00103: Encountered the symbol "end-of-file" when expecting one of the following:
end not pragma final instantiable order overriding static
member constructor mapAppreciate ur help on the above?
Edited by: user1014019 on Oct 3, 2011 6:45 AM
Edited by: BluShadow on 03-Oct-2011 15:08
added {noformat}{noformat} tags. Please read {message:id=9360002} and learn to do this yourself.Please provide a code that can be compiled, the sample that you provided has compilation errors:
Have made change to your code block, so that it compiles.Try to run the below code block:
/* Formatted on 2011/10/03 21:08 (Formatter Plus v4.8.5) */
DECLARE
pgm_id NUMBER := &1;
schd_dt DATE := TO_DATE ('&2', 'MM/DD/YYYY');
l_schd_dt DATE := NULL;
l_pgm_id NUMBER := 0;
l_src_id NUMBER;
l_bulkcollectsize NUMBER;
l_trace_level NUMBER := 0;
l_commitallowance inft1.prm_value%TYPE;
v_insrcdcnt NUMBER := 0;
g_errorstring VARCHAR2 (500) := NULL;
g_log_error VARCHAR2 (300) := NULL;
g_recs_upd NUMBER := 0;
g_recs_ins NUMBER := 0;
g_aud_upd_ts DATE := NULL;
l_data_nbr NUMBER := 0;
l_ts_1 DATE := NULL;
l_ts_2 DATE := NULL;
l_rest_empno emp_stg.mbr_nbr%TYPE := '0';
l_commitsize NUMBER;
CURSOR curtrnrecs (l_rest_empno VARCHAR)
IS
SELECT /* user_hash(tmp) PARALLEL(tmp,8) */ tmp.sec_lbl, tmp.empno,
tmp.ename, tmp.sal, tmp.deptno
FROM emp_stg tmp
WHERE tmp.mbr_nbr > l_rest_empno
ORDER BY tmp.mbr_nbr;
TYPE rec_emp_stg IS TABLE OF emp_stg%ROWTYPE
INDEX BY PLS_INTEGER;
stg_emp_stg rec_emp_stg;
counter NUMBER := 0;
l_idx NUMBER;
ERRORS PLS_INTEGER;
ins_errors EXCEPTION;
PRAGMA EXCEPTION_INIT (ins_errors, -24381);
BEGIN
/* Copy values into local variables */
l_pro := pgm_id;
l_schd_dt := schd_dt;
/* Check if this is the first execution of the program; Get the last processed timestamp if the run is a restart */
/* The restartability of this program is slightly differnt. Data_nbr =1 indicates that the last run was successful. The same program can*/
/* be called multiple times for the same t47date. The restartability is designed accordingly */
BEGIN
SELECT /* SQL_TAG(<$RCSfile: t50lyt_can_hist_trans_load.sql,v $><2>) */
data_nbr, 1, 1, NVL (key_text, '0')
INTO l_data_nbr, l_ts_1, l_ts_2, l_rest_mbr_nbr
FROM inft
WHERE TRUNC (key_ts) = TRUNC (l_schd_dt) AND pro_id = l_pro_id;
EXCEPTION
WHEN NO_DATA_FOUND
THEN
l_data_nbr := 9;
NULL;
WHEN OTHERS
THEN
g_errorstring :=
g_log_error
|| ' : SQLCODE = '
|| SQLCODE
|| ' , ERRORMESSAGE = '
|| SUBSTR (SQLERRM, 1, 200);
RAISE;
END;
IF l_data_nbr = 1
THEN
crm_msg.msg ('Exiting:: Program already run');
RETURN;
ELSIF l_data_nbr = 0
THEN
crm_msg.msg ('This is a restart for the date ' || l_schd_dt);
ELSIF l_data_nbr = 9
THEN
crm_msg.msg ('First execution of this program');
END IF;
BEGIN
IF l_data_nbr = 9
THEN
crm_msg.msg ('This is the First execution of this program');
INSERT INTO inft
(pgm_id, key_ts, key_text, data_nbr, data_ts, data_text
VALUES (l_pro, l_schd_dt, 0, --to hold empno
SYSDATE, 0 --no of recs processed
COMMIT;
END IF;
END;
OPEN curtrn (l_rest_empno);
LOOP
BEGIN
FETCH curtrn
BULK COLLECT INTO stg_emp_rec LIMIT 50000;
IF NVL (curtrnrecs%ROWCOUNT, 0) = 0
THEN
crm_msg.msg ('No Historical Data');
END IF;
FORALL i IN 1 .. stg_emp_rec.COUNT SAVE EXCEPTIONS
INSERT INTO emp
VALUES stg_emp_stg (i);
counter := counter + 1;
g_recs_ins := g_recs_ins + SQL%ROWCOUNT;
EXCEPTION
WHEN ins_errors
THEN
ERRORS := SQL%BULK_EXCEPTIONS.COUNT;
FOR j IN 1 .. ERRORS
LOOP
l_idx := SQL%BULK_EXCEPTIONS (j).ERROR_INDEX;
UPDATE emp
SET src_id = stg_emp_rec (i).empno,
ename = stg_emp_rec (i).ename,
sal = stg_emp_rec (i).sal
WHERE deptno = stg_emp_rec (i).deptno;
g_recs_upd := g_recs_upd + SQL%ROWCOUNT;
END LOOP;
--END;
-- EXIT WHEN curTrnRecs%NOTFOUND;
--END LOOP;
--CLOSE curTrnRecs;
WHEN OTHERS
THEN
g_errorstring :=
g_log_error
|| ' : SQLCODE = '
|| SQLCODE
|| ' , ERRORMESSAGE = '
|| SUBSTR (SQLERRM, 1, 200);
crm_msg.msg (g_errorstring);
RAISE;
END;
IF (counter >= l_commitsize)
THEN
BEGIN
/* To keep track of the timestamp of the last record processed inthe batch; for restartability */
UPDATE inft
SET data_ts = SYSDATE,
key_text = l_empno (idx)
WHERE pgm_id = l_pgm_id AND TRUNC (key_ts) = TRUNC (l_schd_dt);
COMMIT;
counter := 0;
EXCEPTION
WHEN OTHERS
THEN
g_errorstring :=
g_log_error
|| ' : SQLCODE = '
|| SQLCODE
|| ' , ERRORMESSAGE = '
|| SUBSTR (SQLERRM, 1, 200);
crm_msg.msg (g_errorstring);
RAISE;
END;
END IF;
COMMIT;
EXIT WHEN curtrn%NOTFOUND;
-- END LOOP; --End of looping for the main cursor fetch
END LOOP;
CLOSE curtrn;
BEGIN /* Update the data_nbr to 1 to indicate the update is complete */
UPDATE inft
SET data_nbr = 1,
data_ts = NVL (g_aud_upd_ts, data_ts),
data_text = counter
WHERE pro_id = l_pgm_id AND TRUNC (key_ts) = TRUNC (l_schd_dt);
COMMIT;
EXCEPTION
WHEN OTHERS
THEN
g_errorstring :=
g_log_error
|| ' : SQLCODE = '
|| SQLCODE
|| ' , ERRORMESSAGE = '
|| SUBSTR (SQLERRM, 1, 200);
crm_msg.msg (g_errorstring);
RAISE;
END;
g_log_error := 'LOGGING SUMMARY';
crm_msg.msg_tab ('RECS UPDATED', g_recs_upd);
crm_msg.msg_tab ('RECS INSERTED', g_recs_ins);
crm_msg.msg ('Program ends Successfully');
EXCEPTION
WHEN OTHERS
THEN
g_errorstring :=
g_log_error
|| ' : SQLCODE = '
|| SQLCODE
|| ' , ERRORMESSAGE = '
|| SUBSTR (SQLERRM, 1, 200);
crm_msg.msg (g_errorstring);
END;Hope its useful.
Cheers -
In updating my iPod to 6.1.2, I received an error during the update. Now, my ipod is not rebooting. It continues to display a screen showing usb to Itunes picture. Turning off and back on, it goes back to this picture. I don't know how to reset so that I can restore from my backup.
A similar thing happened when I updated the ios on my ipad. But, I was able to reboot, and then restore from backup. How can I get my ipod to reboot and allow restore when it is not even recognized as I reconnect to my computer?Try:
- iOS: Not responding or does not turn on
- Also try DFU mode after try recovery mode
How to put iPod touch / iPhone into DFU mode « Karthik's scribblings
- If not successful and you can't fully turn the iOS device fully off, let the battery fully drain. After charging for an least an hour try the above again.
- Try on another computer
- If still not successful that usually indicates a hardware problem and an appointment at the Genius Bar of an Apple store is in order.
Apple Retail Store - Genius Bar -
Error Message - The project could not be prepared for publishing because an error occurred. (-2125)
I hope you can help.
I have imported a video from my camcorder into iMovie 09. The files total nearly 50gb and have taken up all the spare memory on my mac.
I have now finished editing it into a 1 hour and 20 minute video (not sure how big this final edit is).
Because the original unedited files are so big I am now desperate to export the finished product onto DVD and also onto my external My Passport so i can watch on my TV (not an Apple TV). This will then allow me to delete the 50gb files.
After 6 hours of exporting the movie in HD to My Passport i got the above error message. Can anyone help please?
Please note i have not yet tried to export to DVD. So is the problem with My Passport or is there another issue i dont know about that you could assist with?
Thanks and Regards,Hi
Error -2125
OK Error code - 2125 usually indicates that the movie is to large.
It use to pop up when going to iDVD !
iDVD - DO NOT CARE ABOUT Gbs at all. I got movies on 500Mb that do not fit and 50Gb that fits nicely.
iDVD - ONLY CARES ABOUT - Duration. Duration is Movie time + MENU TIME. Choice of
menu and animation of this can take lost of "DURATION" 15 minutes or even more.
Choice of encoding method and use of SL or DL DVDs determine the DVD limit.
iDVD 08 & 09 & 11 has three levels of qualities.
iDVD 6 has the two last ones
• Professional Quality (movies + menus up to 120 min.) - BEST
• Best Performances (movies + menus less than 60 min.) - High quality on final DVD
• High Quality (in iDVD08 or 09) / Best Quality (in iDVD6) (movies + menus up to 120 min.) - slightly lower quality than above
DL DVDs can store about double of these times.
ALTERNATIVE - The Error Code can indicate that free space on Start-up (BOOT) hard disk is
less than 25Gb (my minimum)
calbe - wrote
If you are getting OSStatus error -2125, I've seen this caused by the computer display sleep settings.
Try changing the sleep settings to never and see if you are able to export.
Yours Bengt W -
Ugh: Error [0x800700a1] The specified path is invalid.
I'm having the following problem.
Our backups are failing with the following error:
In the backup logs, I find:
Error in backup of D:\ during write: Error [0x800700a1] The specified path is invalid.
Error in backup of D:\Perforce\ during write: Error [0x800700a1] The specified path is invalid.
Error in backup of D:\Perforce\Database\ during write: Error [0x800700a1] The specified path is invalid.
Error in backup of D:\Perforce\Database\p4s.exe during write: Error [0x800700a1] The specified path is invalid.
In the event viewer, I find:
The backup operation that started at '?2010?-?05?-?24T21:51:56.331072200Z' has failed with following error code '2155347997' (The operation ended before completion.). Please review the event details for a solution, and then rerun
the backup operation once the issue is resolved.
And on the command line, wbadmin returns:
Found (41) files.
The backup operation stopped before completing.
Summary of the backup operation:
The backup operation stopped before completing.
Detailed error: Element not found.
The backup of the system state failed [5/24/2010 5:23 PM].
Log of files successfully backed up:
C:\Windows\Logs\WindowsServerBackup\Backup-24-05-2010_14-51-56.log
Log of files for which backup failed:
C:\Windows\Logs\WindowsServerBackup\Backup_Error-24-05-2010_14-51-56.log
The operation ended before completion.
Element not found.
ERROR(-3): Backup failed!
This is very frustrating.
The more I use Windows built-in backup the more fragile it seems to be.
The D drive is a local drive and the path is valid.
Running check disk finds no problems. The drive is mostly empty.
I tried with and without the anti-virus software, same problem.
There are no other server errors to indicate a problem with the drive or the path.
I ran vssadmin list writers, and none of them returned any errors.
Why would the backup return an invalid path error, for a path that is valid?
Any help would be greatly appreciated.
Thanks much,
James.Hi Sriram,
Thanks for getting back to me!
I'll try to mail them to you before the end of the week.
A quick question:
if the backup failed to find and copy a single file or directory (for whatever reason), why does it abort the whole process?
The file in question was not critical, so having it missing from the backup would only have been a minor inconvenience.
Obviously, you want to log such an event very clearly, but it does not make sense to me for it to kill the whole process...
Will this be improved in future versions? I have to admit, I've not seen much backup software stop because of such a trivial error, except maybe "copy" from the command prompt.
I think the built-in Window Server 2008 R2 backup software is very promising, and overall, I like it better than the old NT Backup crud.
However, from my limited use, it still seems rough around the edges; too many glitches and problems, something you don't want to see from your backup software.
Thanks much,
James. -
There were errors installing the software
Mac Mini G4 1.25GHz / 512MB / 40GB / Combo / Modem.
Ser: YM6***TAB
<Edited by Moderator: Personal Info - Please See Terms of Use>
Originally Mum's Mini was "doing strange things", so I had to drive 150 miles to try to sort it out.
First I downloaded AppleJack and tried it out on my own G4 Tower before heading north to visit Mum. Applejack installed OK from my USB memory stick.
Unfortunately, it didn't occur to me to take a spare keyboard and I was unable to get her Mac Mini (with a miniature keyboard) to respond to any key presses at start-up, which foiled all attempts to use AppleJack or even single user mode!
However, I was able to use DiskWarrior and it found several corrupted files on the Hard Drive, which it claimed (after two attempts) were repaired. I then "repaired permissions" and ejected the DiskWarrior disc. Then I had the bright idea of going to "Software Update" in the Apple Menu. This downloaded the latest OS10.4.11 and started to install it. After 20 minutes it reported that there was a "problem with installation" and I should reboot and try again, which I did, with the same result. So then I had the amazingly bright idea of erasing the drive and installing 10.4 from the original DVD. This got several minutes into the procedure before reporting a problem. "There were problems installing the software".
I gave up at that point, left Mum my iBook to use and brought the Mac Mini home.
I was able to boot it up from an external Firewire HD, which contained a clone of the boot drive from my own G4 Mac Mini. It seemed to work OK so I tried the Tiger installation DVD again. It failed as before but I was able to save the Crash Log onto the Firewire Drive and you can view it here:
http://www.amstard.co.uk/temp/OSInstallCrashLog.txt
(I hope this means something to somebody! The way I interpret it is that it installed a file then discovered that file was corrupted?)
I used Prosoft "Drive Genius" to erase the internal Hard Drive again and it reported that all was well. But I still couldn't install the OS.
After that, I couldn't even get the Mac Mini to boot from the external Firewire drive. It just produces a black oblong on a gray screen with a stalled "cog wheel". Here's a photo that I took:
http://www.amstard.co.uk/temp/screenphoto.jpg
There is nothing connected except the standard USB keyboard and mouse at this point and the external Firewire drive.
It does boot up with the generic Tiger installation DVD. I can run Disk Utility, which reports no errors on the Hard Drive. But it fails when I try to install the OS 10.4 with an error message "There were problems installing the software" (generic OS10.4 installer) or "There were errors installing the software" (original Mac Mini OS10.4 installer).
I have fitted a new 120GB drive and replaced the RAM. The OS still fails to install on the newly formatted drive. The Apple site suggests a firmware update for this error message but doesn't list one for the Mini.
I have tried installing OS10.4 from the original Mac Mini installations discs and from a generic 10.4 installer. Both give the same "There were errors installing the software" message.
I have "zapped the PRAM" without making any difference to this symptom.
I have tried doing the simplest installation without any additional fonts, language translators or bundled software.
Any suggestions - apart from "scrap it!"?
Martin (UK)It does boot up with the generic Tiger installation DVD. I can run Disk Utility, which reports no errors on the Hard Drive. But it fails when I try to install the OS 10.4 with an error message "There were problems installing the software" (generic OS10.4 installer) or "There were errors installing the software" (original Mac Mini OS10.4 installer).
I have fitted a new 120GB drive and replaced the RAM. The OS still fails to install on the newly formatted drive. The Apple site suggests a firmware update for this error message but doesn't list one for the Mini.
I have tried installing OS10.4 from the original Mac Mini installations discs and from a generic 10.4 installer. Both give the same "There were errors installing the software" message.
Since this is an original G4 mini, there is no reason at all that any full retail 10.4 installer, or the original MacOS installer that came with the mini would not work. Later minis, released after Tiger's release date were in some instances unable to boot from the early versions of the Tiger retail installer because 10.4.0 or 10.4.1 pre-dated the versions those minis came supplied with, but clearly that isn't the case with your system.
If you are certain that the MacOS install disk you have is the one that original one that came with the mini (which should be a late version of MacOS 10.3.x), then the only obvious thing to check is that you have correctly partitioned the drive (it should be partitioned in the Apple Partition Map scheme, and then formatted as MacOS Extended (Journalled). If those parameters are met and you continue to get the error from a valid installer for that system, then the potential causes narrow to such things as defective install disks (unlikely since you have tried more than one), defective optical drive unlikely because you can boot from the install disk using the drive), or defective logic board/disk controller - which is a distinct possibility since it's possible that was responsible for the first drive failure (or the indications of failure).
Boot the system using the original MacOS installer and using Disk Utility, set the new internal drive up again with the APM partitioning and MacOS Extended (Journalled) formatting, then immediately run the 'Repair Disk' tool on it to make sure the drive is being read and written correctly. Then performa PMU reset (instructions below) to ensure that the failure to boot from the external FW drive is not a simple matter of dropped FW port. On rebooting with your FW drive connected, hold the Option key down to see if the system then recognizes your external drive. If it does, select it and attempt to boot from it.
With luck that will give you a working system, booted from your external, at which point I would then see if it's possible to clone your external to the new internal drive, rather than attempt a reinstall from the MacOS installer.
On the face of it there should be no reason that would not work since by booting from the MacOS installer you basically show that the system is sound and the optical drive is working. By partitioning and formatting the internal drive and getting a clean bill of health from the repair disk tool, you show the drive and disk controller are OK. That doesn't leave much else to be at fault! -
Dear All,
I am getting a below error while doing ehp6 installation on sybase (high availbility )
can any one help me on this..?
An error occurred while processing option SAP Business Suite 7i 2011 > Enhancement Package 6 for SAP ERP 6.0 > SAP Application Server ABAP > SAP ASE > High-Availability System > Database Instance( Last error reported by the step: System call failed. Error 2 (The system cannot find the file specified. ) in execution of system call 'CreateProcessAsUser' with parameter ( , NULL, Program Files/sapinst_instdir/BS2011/ERP606/AS-ABAP/SYB/HA/DB, &StartupInfo, &ProcessInfo), line (646) in file (d:\depot\bas\720_rel\bc_720-2_rel\gen\optu\ntamd64\ins\sapinst\impl\src\syslib\synxcchapp.cpp), stack trace: d:\depot\bas\720_rel\bc_720-2_rel\gen\optu\ntamd64\ins\sapinst\impl\src\ejs\ejscontroller.cpp: 181: EJSControllerImpl::executeScript() d:\depot\bas\720_rel\bc_720-2_rel\gen\optu\ntamd64\ins\sapinst\impl\src\ejs\jsextension.hpp: 1059: CallFunctionBase::call() d:\depot\bas\720_rel\bc_720-2_rel\gen\optu\ntamd64\ins\sapinst\impl\src\osmod\iaxxbprocess.cpp: 423: CIaOsProcess::start_impl() d:\depot\bas\720_rel\bc_720-2_rel\gen\optu\ntamd64\ins\sapinst\impl\src\syslib\synxcchapp.cpp: 238: CSyChildApplicationImpl::start(false) d:\depot\bas\720_rel\bc_720-2_rel\gen\optu\ntamd64\ins\sapinst\impl\src\syslib\synxcchapp.cpp: 262: CSyChildApplicationImpl::doStart() .). You can no
Regards,
Letz..Hello Mauricio.
Thanks
Two Thinks:
1.- This error appears precisely in the process of creating SAP users including you mention sidadm:
A.- Execute sapinst
B.- Installation option is chosen
SAP NetWeaver CE Production Edition
Installation Options
High-Availability System
Central Service Instance (SCS)
c.- System ID, Next and appear message error
2.- However, the user manually create sidadm, I gave the permissions you indicate, and the error message is the same
Thanks -
Coherence Error at the time of Starting weblogic Server
Hi ,
I am getting below error at the time of starting Weblogic OSB managed server
We are using osb_cluster1 (Unicast) for osb_server1 managed server.
When Weblogic server try to start the managed server we get following Coherence errors and startup scripts try to point to Oracle Coherence 3.6.0.4.(its mainly happening in starting osb_server1 managed server, this error is not appearing during soa_server1 managed server start)
We don't want to use the coherence at all, we are trying to disable the coherence feature, but hardly getting any success in it, every time during server start-up following error appears.
Let me know if you have any solution to it.
####<Mar 5, 2012 9:18:55.424 AM > <Warning> <Coherence> <sjsj-idm.kuy.co.wo> <osb_server1> <Logger@406289568 3.6.0.4> <<anonymous>> <> <3976a80e38d52337:-f13ff44:135df5aa8b6:-8000-0000000000000007> <1330892335424> <BEA-000000> <Oracle Coherence 3.6.0.4 (member=n/a): This Member(Id=0, Timestamp=2012-03-05 09:18:23.752, Address=11.49.63.33:7880, MachineId=31265, Location=site:kuy.co.wo,machine:deap-idm01,process:10629, Role=OSB-node) has been attempting to join the cluster using WKA list [sjsj-idm.kuy.co.wo/11.49.63.33:9003] for 31 seconds without success; this could indicate a mis-configured WKA, or it may simply be the result of a busy cluster or active failover.>
####<Mar 5, 2012 9:18:55.425 AM > <Warning> <Coherence> <sjsj-idm.kuy.co.wo> <osb_server1> <Logger@406289568 3.6.0.4> <<anonymous>> <> <3976a80e38d52337:-f13ff44:135df5aa8b6:-8000-0000000000000007> <1330892335425> <BEA-000000> <Oracle Coherence 3.6.0.4 (member=n/a): Delaying formation of a new cluster; waiting for well-known nodes to respond>
####<Mar 5, 2012 9:22:58.769 AM > <Error> <Coherence> <sjsj-idm.kuy.co.wo> <osb_server1> <Logger@406289568 3.6.0.4> <<anonymous>> <> <3976a80e38d52337:-f13ff44:135df5aa8b6:-8000-0000000000000007> <1330892578769> <BEA-000000> <Oracle Coherence 3.6.0.4 (member=n/a): Detected soft timeout) of {WrapperGuardable Guard{Daemon=IpMonitor} Service=ClusterService{Name=Cluster, State=(SERVICE_STARTED, STATE_ANNOUNCE), Id=0, Version=3.6}}>
####<Mar 5, 2012 9:22:58.770 AM > <Warning> <Coherence> <sjsj-idm.kuy.co.wo> <osb_server1> <Logger@406289568 3.6.0.4> <<anonymous>> <> <3976a80e38d52337:-f13ff44:135df5aa8b6:-8000-0000000000000007> <1330892578770> <BEA-000000> <Oracle Coherence 3.6.0.4 (member=n/a): Attempting recovery of Guard{Daemon=IpMonitor}>
####<Mar 5, 2012 9:23:25.530 AM > <Error> <Coherence> <sjsj-idm.kuy.co.wo> <osb_server1> <Logger@406289568 3.6.0.4> <<anonymous>> <> <3976a80e38d52337:-f13ff44:135df5aa8b6:-8000-0000000000000007> <1330892605530> <BEA-000000> <Oracle Coherence 3.6.0.4 (member=n/a): Failure to join a cluster for 301 seconds; stopping cluster service.>
####<Mar 5, 2012 9:23:25.879 AM > <Error> <Coherence> <sjsj-idm.kuy.co.wo> <osb_server1> <Logger@406289568 3.6.0.4> <<anonymous>> <> <3976a80e38d52337:-f13ff44:135df5aa8b6:-8000-0000000000000007> <1330892605879> <BEA-000000> <Oracle Coherence 3.6.0.4 (member=n/a): Error while starting cluster: com.tangosol.net.RequestTimeoutException: Timeout during service start: ServiceInfo(Id=0, Name=Cluster, Type=Cluster
MemberSet=ServiceMemberSet(
OldestMember=n/a
ActualMemberSet=MemberSet(Size=0, BitSetCount=0
MemberId/ServiceVersion/ServiceJoined/MemberState
at com.tangosol.coherence.component.util.daemon.queueProcessor.service.Grid.onStartupTimeout(Grid.CDB:6)
at com.tangosol.coherence.component.util.daemon.queueProcessor.Service.start(Service.CDB:28)
at com.tangosol.coherence.component.util.daemon.queueProcessor.service.Grid.start(Grid.CDB:6)
at com.tangosol.coherence.component.net.Cluster.onStart(Cluster.CDB:637)
at com.tangosol.coherence.component.net.Cluster.start(Cluster.CDB:11)
at com.tangosol.coherence.component.util.SafeCluster.startCluster(SafeCluster.CDB:4)
at com.tangosol.coherence.component.util.SafeCluster.restartCluster(SafeCluster.CDB:7)
at com.tangosol.coherence.component.util.SafeCluster.ensureRunningCluster(SafeCluster.CDB:26)
at com.tangosol.coherence.component.util.SafeCluster.start(SafeCluster.CDB:2)
at com.tangosol.net.CacheFactory.ensureCluster(CacheFactory.java:998)
at com.bea.alsb.coherence.impl.CoherenceProvider.<init>(CoherenceProvider.java:45)
at com.bea.alsb.coherence.impl.CoherenceProviderFactory.newInstance(CoherenceProviderFactory.java:21)
at com.bea.alsb.coherence.init.CoherenceAppListener.preStart(CoherenceAppListener.java:45)
at weblogic.application.internal.flow.BaseLifecycleFlow$PreStartAction.run(BaseLifecycleFlow.java:282)
at weblogic.security.acl.internal.AuthenticatedSubject.doAs(AuthenticatedSubject.java:321)
at weblogic.security.service.SecurityManager.runAs(SecurityManager.java:120)
at weblogic.application.internal.flow.BaseLifecycleFlow$LifecycleListenerAction.invoke(BaseLifecycleFlow.java:199)
at weblogic.application.internal.flow.BaseLifecycleFlow.preStart(BaseLifecycleFlow.java:62)
at weblogic.application.internal.flow.HeadLifecycleFlow.prepare(HeadLifecycleFlow.java:284)
at weblogic.application.internal.BaseDeployment$1.next(BaseDeployment.java:614)
at weblogic.application.utils.StateMachineDriver.nextState(StateMachineDriver.java:54)
at weblogic.application.internal.BaseDeployment.prepare(BaseDeployment.java:184)
at weblogic.application.internal.EarDeployment.prepare(EarDeployment.java:58)
at weblogic.application.internal.DeploymentStateChecker.prepare(DeploymentStateChecker.java:154)
at weblogic.deploy.internal.targetserver.AppContainerInvoker.prepare(AppContainerInvoker.java:60)
at weblogic.deploy.internal.targetserver.AppDeployment.prepare(AppDeployment.java:141)
at weblogic.management.deploy.internal.DeploymentAdapter$1.doPrepare(DeploymentAdapter.java:39)
at weblogic.management.deploy.internal.DeploymentAdapter.prepare(DeploymentAdapter.java:191)
at weblogic.management.deploy.internal.AppTransition$1.transitionApp(AppTransition.java:22)
at weblogic.management.deploy.internal.ConfiguredDeployments.transitionApps(ConfiguredDeployments.java:240)
at weblogic.management.deploy.internal.ConfiguredDeployments.prepare(ConfiguredDeployments.java:166)
at weblogic.management.deploy.internal.ConfiguredDeployments.deploy(ConfiguredDeployments.java:122)
at weblogic.management.deploy.internal.DeploymentServerService.resume(DeploymentServerService.java:181)
at weblogic.management.deploy.internal.DeploymentServerService.start(DeploymentServerService.java:97)
at weblogic.t3.srvr.SubsystemRequest.run(SubsystemRequest.java:64)
at weblogic.work.ExecuteThread.execute(ExecuteThread.java:207)
at weblogic.work.ExecuteThread.run(ExecuteThread.java:176)>
Edited by: 858026 on Mar 4, 2012 6:21 PM
Edited by: 858026 on Mar 4, 2012 6:23 PMHi NJ,
In WL console while setting up cluster I have given Messaging
Mode to Unicast,
By default Multicast address and ports comes up
Multicast Address - 239.192.0.0,
Multicast Port- 7001
I have modified the override file but still getting given error logs while server startup and its trying to look for override file in Oracle Coherence 3.6.0.4/coherence.jar
<!DOCTYPE coherence SYSTEM ""coherence.dtd"">
<coherence>
<cluster-config>
<!-- By default, this is using a multicast listener for cluster discovery, etc.
If you wish to use a unicast listener:
- update the entries in /coherence/unicast-listener/well-known-addresses/socket for each member of the cluster
(or specify the corresponding system properties)
- set the /coherence/unicast-listener/address to the host name of this machine
See http://coherence.oracle.com/display/COH35UG/well-known-addresses for more details. -->
<unicast-listener>
<well-known-addresses>
<socket-address id=""1"">
<address system-property=""OSB.coherence.wka1""></address>
<port system-property=""OSB.coherence.wka1.port""></port>
</socket-address>
<socket-address id=""2"">
<address system-property=""OSB.coherence.wka2""></address>
<port system-property=""OSB.coherence.wka2.port""></port>
</socket-address>
<socket-address id=""3"">
<address system-property=""OSB.coherence.wka3""></address>
<port system-property=""OSB.coherence.wka3.port""></port>
</socket-address>
<socket-address id=""4"">
<address system-property=""OSB.coherence.wka4""></address>
<port system-property=""OSB.coherence.wka4.port""></port>
</socket-address>
<socket-address id=""5"">
<address system-property=""OSB.coherence.wka5""></address>
<port system-property=""OSB.coherence.wka5.port""></port>
</socket-address>
<socket-address id=""6"">
<address system-property=""OSB.coherence.wka6""></address>
<port system-property=""OSB.coherence.wka6.port""></port>
</socket-address>
<socket-address id=""7"">
<address system-property=""OSB.coherence.wka7""></address>
<port system-property=""OSB.coherence.wka7.port""></port>
</socket-address>
<socket-address id=""8"">
<address system-property=""OSB.coherence.wka8""></address>
<port system-property=""OSB.coherence.wka8.port""></port>
</socket-address>
<socket-address id=""9"">
<address system-property=""OSB.coherence.wka9""></address>
<port system-property=""OSB.coherence.wka9.port""></port>
</socket-address>
</well-known-addresses>
<address system-property=""OSB.coherence.localhost"">127.0.0.1</address>
<port system-property=""OSB.coherence.localport"">7890</port>
</unicast-listener>
<multicast-listener>
<address system-property=""OSB.coherence.clusteraddress"">239.192.0.0</address>
<port system-property=""OSB.coherence.clusterport"">7001</port>
</multicast-listener>
</cluster-config>
</coherence>
####<Mar 6, 2012 3:00:44.050 PM NZDT> <Notice> <StdErr> <dete-idm01.hnz.co.nz> <osb_server1> <[ACTIVE] ExecuteThread: '1' for queue: 'weblogic.kernel.Default (self-tuning)'> <<WLS Kernel>> <> <> <1330999244050> <BEA-000000> <2012-03-06 15:00:44.015 Oracle Coherence 3.6.0.4 <Info> (thread=[ACTIVE] ExecuteThread: '1' for queue: 'weblogic.kernel.Default (self-tuning)'): Loaded operational configuration from "zip:/u01/app/oracle/product/OSB11.1.1.4/oracle_common/modules/oracle.coherence_3.6/coherence.jar!/tangosol-coherence.xml">
####<Mar 6, 2012 3:00:44.053 PM NZDT> <Notice> <StdErr> <dete-idm01.hnz.co.nz> <osb_server1> <[ACTIVE] ExecuteThread: '1' for queue: 'weblogic.kernel.Default (self-tuning)'> <<WLS Kernel>> <> <> <1330999244053> <BEA-000000> <2012-03-06 15:00:44.029 Oracle Coherence 3.6.0.4 <Info> (thread=[ACTIVE] ExecuteThread: '1' for queue: 'weblogic.kernel.Default (self-tuning)'): Loaded operational overrides from "zip:/u01/app/oracle/product/OSB11.1.1.4/oracle_common/modules/oracle.coherence_3.6/coherence.jar!/tangosol-coherence-override-dev.xml">
####<Mar 6, 2012 3:00:44.053 PM NZDT> <Notice> <StdErr> <dete-idm01.hnz.co.nz> <osb_server1> <[ACTIVE] ExecuteThread: '1' for queue: 'weblogic.kernel.Default (self-tuning)'> <<WLS Kernel>> <> <> <1330999244053> <BEA-000000> <2012-03-06 15:00:44.030 Oracle Coherence 3.6.0.4 <Info> (thread=[ACTIVE] ExecuteThread: '1' for queue: 'weblogic.kernel.Default (self-tuning)'): Loaded operational overrides from "zip:/u01/app/oracle/product/OSB11.1.1.4/user_projects/domains/OSBD/servers/osb_server1/tmp/_WL_user/ALSB Coherence Cache Provider/yannht/APP-INF/lib/com.bea.alsb.coherence-impl.jar!/tangosol-coherence-override.xml">
####<Mar 6, 2012 3:00:44.073 PM NZDT> <Error> <OSB Coherence WebLogic> <dete-idm01.hnz.co.nz> <osb_server1> <[ACTIVE] ExecuteThread: '1' for queue: 'weblogic.kernel.Default (self-tuning)'> <<anonymous>> <> <0ed5cc20267507d3:a44cfd4:135e5bc3642:-8000-0000000000000003> <1330999244073> <BEA-2032481> <Unable to initialize OSB Coherence Cache Provider because there was an error starting Coherence:
com.bea.alsb.coherence.impl.ConfigurationException: Error starting Coherence from cache configuration file /coherence/osb-coherence-cache-config.xml:
(Wrapped) java.lang.reflect.InvocationTargetException
at com.tangosol.util.Base.ensureRuntimeException(Base.java:293)
at com.tangosol.util.Base.ensureRuntimeException(Base.java:269)
at com.tangosol.net.CacheFactory.getServiceConfig(CacheFactory.java:1355)
at com.tangosol.net.CacheFactory.getCacheFactoryBuilderConfig(CacheFactory.java:1231)
at com.tangosol.net.CacheFactory.getCacheFactoryBuilder(CacheFactory.java:593)
at com.bea.alsb.coherence.impl.CoherenceProvider.<init>(CoherenceProvider.java:42)
at com.bea.alsb.coherence.impl.CoherenceProviderFactory.newInstance(CoherenceProviderFactory.java:21)
at com.bea.alsb.coherence.init.CoherenceAppListener.preStart(CoherenceAppListener.java:45)
at weblogic.application.internal.flow.BaseLifecycleFlow$PreStartAction.run(BaseLifecycleFlow.java:282)
at weblogic.security.acl.internal.AuthenticatedSubject.doAs(AuthenticatedSubject.java:321)
at weblogic.security.service.SecurityManager.runAs(SecurityManager.java:120)
at weblogic.application.internal.flow.BaseLifecycleFlow$LifecycleListenerAction.invoke(BaseLifecycleFlow.java:199)
at weblogic.application.internal.flow.BaseLifecycleFlow.preStart(BaseLifecycleFlow.java:62)
at weblogic.application.internal.flow.HeadLifecycleFlow.prepare(HeadLifecycleFlow.java:283)
at weblogic.application.internal.BaseDeployment$1.next(BaseDeployment.java:613)
at weblogic.application.utils.StateMachineDriver.nextState(StateMachineDriver.java:52)
at weblogic.application.internal.BaseDeployment.prepare(BaseDeployment.java:184)
at weblogic.application.internal.EarDeployment.prepare(EarDeployment.java:58)
at weblogic.application.internal.DeploymentStateChecker.prepare(DeploymentStateChecker.java:154)
at weblogic.deploy.internal.targetserver.AppContainerInvoker.prepare(AppContainerInvoker.java:60)
at weblogic.deploy.internal.targetserver.AppDeployment.prepare(AppDeployment.java:141)
at weblogic.management.deploy.internal.DeploymentAdapter$1.doPrepare(DeploymentAdapter.java:39)
at weblogic.management.deploy.internal.DeploymentAdapter.prepare(DeploymentAdapter.java:191)
at weblogic.management.deploy.internal.AppTransition$1.transitionApp(AppTransition.java:21)
at weblogic.management.deploy.internal.ConfiguredDeployments.transitionApps(ConfiguredDeployments.java:240)
at weblogic.management.deploy.internal.ConfiguredDeployments.prepare(ConfiguredDeployments.java:165)
at weblogic.management.deploy.internal.ConfiguredDeployments.deploy(ConfiguredDeployments.java:122)
at weblogic.management.deploy.internal.DeploymentServerService.resume(DeploymentServerService.java:180)
at weblogic.management.deploy.internal.DeploymentServerService.start(DeploymentServerService.java:96)
at weblogic.t3.srvr.SubsystemRequest.run(SubsystemRequest.java:64)
at weblogic.work.ExecuteThread.execute(ExecuteThread.java:207)
at weblogic.work.ExecuteThread.run(ExecuteThread.java:176)
Caused by: java.lang.reflect.InvocationTargetException
at sun.reflect.NativeMethodAccessorImpl.invoke0(Native Method)
at sun.reflect.NativeMethodAccessorImpl.invoke(NativeMethodAccessorImpl.java:39)
at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:25)
at java.lang.reflect.Method.invoke(Method.java:597)
at com.tangosol.net.CacheFactory.getServiceConfig(CacheFactory.java:1350)
... 29 more
Caused by: (Wrapped: Failed to apply the element override: /tangosol-coherence-override-dev.xml) (Wrapped: Failed to apply the element override: /tangosol-coherence-override.xml) (Wrapped: Failed to apply the element override: /coherence/osb-coherence-override.xml) (Wrapped) java.io.IOException: Exception occurred during parsing: looking for id=10, found id=1((0,29,13) Name coherence.dtd)
at com.tangosol.util.Base.ensureRuntimeException(Base.java:293)
at com.tangosol.coherence.component.application.console.Coherence.loadOverrides(Coherence.CDB:83)
at com.tangosol.coherence.component.application.console.Coherence.loadConfiguration(Coherence.CDB:46)
at com.tangosol.coherence.component.application.console.Coherence.getServiceConfig(Coherence.CDB:14)
at com.tangosol.coherence.component.application.console.Coherence.ensureRunningLogger(Coherence.CDB:10)
at com.tangosol.coherence.component.application.console.Coherence.getSafeCluster(Coherence.CDB:14)
at com.tangosol.coherence.component.application.console.Coherence.getServiceConfig(Coherence.CDB:8)
... 34 more
Caused by: (Wrapped: Failed to apply the element override: /tangosol-coherence-override.xml) (Wrapped: Failed to apply the element override: /coherence/osb-coherence-override.xml) (Wrapped) java.io.IOException: Exception occurred during parsing: looking for id=10, found id=1((0,29,13) Name coherence.dtd)
at com.tangosol.util.Base.ensureRuntimeException(Base.java:293)
at com.tangosol.coherence.component.application.console.Coherence.loadOverrides(Coherence.CDB:83)
at com.tangosol.coherence.component.application.console.Coherence.loadOverrides(Coherence.CDB:64)
... 39 more
Caused by: (Wrapped: Failed to apply the element override: /coherence/osb-coherence-override.xml) (Wrapped) java.io.IOException: Exception occurred during parsing: looking for id=10, found id=1((0,29,13) Name coherence.dtd)
at com.tangosol.util.Base.ensureRuntimeException(Base.java:293)
at com.tangosol.coherence.component.application.console.Coherence.loadOverrides(Coherence.CDB:83)
at com.tangosol.coherence.component.application.console.Coherence.loadOverrides(Coherence.CDB:64)
... 40 more
Caused by: (Wrapped) java.io.IOException: Exception occurred during parsing: looking for id=10, found id=1((0,29,13) Name coherence.dtd)
at com.tangosol.run.xml.XmlHelper.loadXml(XmlHelper.java:120)
at com.tangosol.run.xml.XmlHelper.loadXml(XmlHelper.java:155)
at com.tangosol.coherence.component.application.console.Coherence.loadOverrides(Coherence.CDB:41)
at com.tangosol.coherence.component.application.console.Coherence.loadOverrides(Coherence.CDB:64)
at com.tangosol.coherence.component.application.console.Coherence.loadOverrides(Coherence.CDB:64)
at com.tangosol.coherence.component.application.console.Coherence.loadConfiguration(Coherence.CDB:46)
at com.tangosol.coherence.component.application.console.Coherence.getServiceConfig(Coherence.CDB:14)
at com.tangosol.coherence.component.application.console.Coherence.ensureRunningLogger(Coherence.CDB:10)
at com.tangosol.coherence.component.application.console.Coherence.getSafeCluster(Coherence.CDB:16)
at com.tangosol.coherence.component.application.console.Coherence.getServiceConfig(Coherence.CDB:8)
at sun.reflect.NativeMethodAccessorImpl.invoke0(Native Method)
at sun.reflect.NativeMethodAccessorImpl.invoke(NativeMethodAccessorImpl.java:39)
at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:25)
at java.lang.reflect.Method.invoke(Method.java:597)
at com.tangosol.net.CacheFactory.getServiceConfig(CacheFactory.java:1350)
at com.tangosol.net.CacheFactory.getCacheFactoryBuilderConfig(CacheFactory.java:1231)
at com.tangosol.net.CacheFactory.getCacheFactoryBuilder(CacheFactory.java:593)
at com.bea.alsb.coherence.impl.CoherenceProvider.<init>(CoherenceProvider.java:42)
at com.bea.alsb.coherence.impl.CoherenceProviderFactory.newInstance(CoherenceProviderFactory.java:21)
at com.bea.alsb.coherence.init.CoherenceAppListener.preStart(CoherenceAppListener.java:45)
at weblogic.application.internal.flow.BaseLifecycleFlow$PreStartAction.run(BaseLifecycleFlow.java:282)
at weblogic.security.acl.internal.AuthenticatedSubject.doAs(AuthenticatedSubject.java:321)
at weblogic.security.service.SecurityManager.runAs(SecurityManager.java:120)
at weblogic.application.internal.flow.BaseLifecycleFlow$LifecycleListenerAction.invoke(BaseLifecycleFlow.java:199)
at weblogic.application.internal.flow.BaseLifecycleFlow.preStart(BaseLifecycleFlow.java:62)
at weblogic.application.internal.flow.HeadLifecycleFlow.prepare(HeadLifecycleFlow.java:284)
at weblogic.application.internal.BaseDeployment$1.next(BaseDeployment.java:614)
at weblogic.application.utils.StateMachineDriver.nextState(StateMachineDriver.java:54)
at weblogic.application.internal.BaseDeployment.prepare(BaseDeployment.java:184)
at weblogic.application.internal.EarDeployment.prepare(EarDeployment.java:58)
at weblogic.application.internal.DeploymentStateChecker.prepare(DeploymentStateChecker.java:154)
at weblogic.deploy.internal.targetserver.AppContainerInvoker.prepare(AppContainerInvoker.java:60)
at weblogic.deploy.internal.targetserver.AppDeployment.prepare(AppDeployment.java:141)
at weblogic.management.deploy.internal.DeploymentAdapter$1.doPrepare(DeploymentAdapter.java:39)
at weblogic.management.deploy.internal.DeploymentAdapter.prepare(DeploymentAdapter.java:191)
at weblogic.management.deploy.internal.AppTransition$1.transitionApp(AppTransition.java:22)
at weblogic.management.deploy.internal.ConfiguredDeployments.transitionApps(ConfiguredDeployments.java:240)
at weblogic.management.deploy.internal.ConfiguredDeployments.prepare(ConfiguredDeployments.java:166)
at weblogic.management.deploy.internal.ConfiguredDeployments.deploy(ConfiguredDeployments.java:122)
at weblogic.management.deploy.internal.DeploymentServerService.resume(DeploymentServerService.java:181)
at weblogic.management.deploy.internal.DeploymentServerService.start(DeploymentServerService.java:97)
... 3 more
Caused by: java.io.IOException: Exception occurred during parsing: looking for id=10, found id=1((0,29,13) Name coherence.dtd)
at com.tangosol.run.xml.SimpleParser.parseXml(SimpleParser.java:134)
at com.tangosol.run.xml.SimpleParser.parseXml(SimpleParser.java:71)
at com.tangosol.run.xml.SimpleParser.parseXml(SimpleParser.java:84)
at com.tangosol.run.xml.XmlHelper.loadXml(XmlHelper.java:116)
... 43 more
The error can be caused by one of the following:
1) The operational configuration file is invalid (see $DOMAIN_DIR$/config/osb/coherence/osb-coherence-override.xml)
2) The cache configuration file is invalid (see $DOMAIN_DIR$/config/osb/coherence/osb-coherence-cache-config.xml)>
Maybe you are looking for
-
I recently purchased iwork 8. I have been using 6 and have used a lot of animated GIF files with a clear or transparent background. This has always worked well with 6 but with 8 the GIFs show up with a white box background. They place and play the wa
-
Some websites which I have accessed without problems will no longer work with Firefox. My digital banking site says that I should have Firefox 2.0 (at least) & I have 3.6.8 installed. My Yahoo mail will not open in the new version - again it suggests
-
Problem in generating acknowledgement no in production server
am generating the 40ack feature by giving the Transaction Code :- Pe03. 2.When i going to change option after generating the 40ack feature, i am unable to get the change option and the activate option in the production server. I want to update the ac
-
How can I get my camera and video to work?
I just downloaded to new system and now my camera or video won't save pictures. PLEASE HELP
-
HT201317 Can I prohibit shared photo stream images from being forwarded/downloaded?
I wish to stop any images I've shared and are sharing with a group from being downloaded or forwarded from their devices. Is their anyway of write protecting the images to be shared by the owner only? Thanks