Any FM's or BAPI's to update the XRPM tables rpm_bupa_locat, rpm_bupa_0000

Hi All,
I am looking for some standard FM's or BAPI's to update the tables rpm_bupa_locat & rpm_bupa_0000 in XRPM system.
Any pointers would be appreciated.
Thanks...

Hi Jesus
we had similar requirement and we used the FM FI_ITEMS_MASS_CHANGE
I am not sure if it changes BSIS or not. But I am sure you are an expert and you can check that
Br, Ajay M

Similar Messages

ERROR IN FILE--XI--RFC SCENARIO. BAPI did not UPDATE the DATABASE TABLE

Hi
I have created a scenario FILE -XI- RFC
File is picked by file adapter - Its working fine
I have used BPM
In RFC side i used BAPI_INCOMINGINVOICE_CREATE
Its working fine and return an Invoice Number and Fisical year .
When i Check this in the R/3 System , in Invoice no Does not Exist .
Message mapping is ok
SXMB_MONI all are ok
Receiver file i got the invoice no and fisical year .
The Problem is " DATABASE TABLE DID NOT UPDATED "
So should i do BAPI_COMMIT seperately ........
Any solution ................
VERY VERY URGENT .....
thanks in advance
B.Jude

hi jude,
Commit Control for Single BAPI Calls
If you want to use this communication channel to call BAPIs as remote-enabled function modules that change data in the database, set the indicator.
If executed successfully, the transaction is written to the database by calling the function module BAPI_TRANSACTION_COMMIT explicitly. If an error occurs, the transaction is rolled back by BAPI_TRANSACTION_ROLLBACK.
The result is determined by the value of the field TYPE in parameter RETURN. If successful, the tables are empty and the values , S, I, and W are displayed. All other values are regarded as errors.
To change this setting, set the indicator BAPI Advanced Mode.
<b>In the Successful RETURN-TYPE Values table, enter the values that should lead to a successful execution.</b>
Regards,
Mandeep Virk

Is there any Standard BAPI's to update the table BP021?

Hi,
I am developing an inbound program to update the Business Partner Master(BP021) table. I need to update the field 'Staff_Count' in that table.
Is there any BAPI's available to update the BP021 table? Thanks in advance for your help..
Poornima

Hi,
Some FM's are available.
Please refer these FM's
FS_API_BP021_CHANGE Change Fiscal Year Information
FS_API_BP021_GET Read Fiscal Year Information
FTB_BUPA_BP021_GET
FTBP_READ_BP021
FSBP_READ_BP021
Regards,
Jyothi CH.

Adobe premiere can not find any module capable of playing video. Update the video drivers and start again.

Adobe Premiere can not find any module capable of playing video. Update the video drivers and start again.
I've tried all the options suggested and the problem continues.
What else can I do?
Note: I had already worked before.
Windows 8.1
Notebook i7, 8M memory, video card Nvidia (updated).
Adobe Premiere Pro 2014
Please help me. Thank you.
mailto: [email protected]

Here is a link to an Adobe TechNote about the same issue with an earlier (much earlier!) version of Premiere Elements and Windows XP.
http://kb2.adobe.com/cps/324/324938.html
I'll leave it to Steve and Bill as to whether the fix offered in the link for Premiere Elements 2 would still be applicable to your version of Premiere Elements.
Hope this is of some assistance.

Update the JEST table

Hi,
Is there a BAPI that updates the JEST table - status of scheduling agreements?
Thanks,
Leon

Hi,
I want to insert new user status in JEST table but I can't find any suitable function. I have tried all function listed above, but it not works. Did anyone know what function module to insert new user status in JEST table?
example:
MANDT OBJNR                         STAT       CHGNR
140   NV000000097200000007     E0004       001
140   NV000000097200000007     E0006       001
140   NV000000097200000007     I0001       001
140   NV000000097200000007     I0028       001
I would like to add stat = 'E0007' in JEST table. Thanks.

How to update the VBFA table without entries in VBRK and VBRP tables

Hello,
I have a requirement , where the sales order , delivery happens in one SAP system say X system and billing document wil happens in other sap system say Y.
Now in this particular case , if the user want to know the billing document number in X system. what would be the solution.
Is there any possibility to update the VBFA table with invoice number of Y system (without updating the VBRK and VBRP tables).
User want to see the billing doc number from sales order in the form of document flow in X system
Thanks in advance
Pradeep

Hii
Without updating VBRK/VBRP table and updating VBFA is not possible, So you have to play with work arround to create one Z TABLE, so whenever system Y will create billing document with the reference of System X data you have to update Ztable with Invoice number created in System Y, The primary key will be in Z TABLE is Delivery document number to track one to one with billing doc.
Thanks and Regards
Shambhu Sarkar

Updating the VETVG table while creating the purchase order

hi all,
I have one requirement to calculated the delivery creation date while creating the Purchase Order. It is calculated based on the delivery date of PO. I have calculated that one but how to update it after calculation. Can any body give a user exit or BADI with implementation which will update the VETVG table while creating the PO.
Thanks
rajkumar

hi sanjay,
thanks for reply, I am using same BADI(ME_PROCESS_PO_CUST) and implementation(FIELDSELECTION_ITEM_REFKEYS). In this implementation i am setting the shipping data with SET_SHIPPINGDATA method . but after that the values are not updating the EKPV and VETVG tables but it is only showing in the screen. Can you give a idea where to pass these values so it will update the tables.
thanks
rajkumar

How and where does SAP standard programs update the master tables...

Hello there,
How and where does SAP standard programs update the master tables...
to be precise.. if a (any) transaction occurs the programs behind it holds the data in temporary structures.
where and when does it get updated in the master table.
can anyone tell me how it happens?
I Know that from the where used list one can find the corresponding table but most of the time it wont suffice
I am expecting a proper answer.
Santosh B

Hello Santosh,
you need to do some self-reading on the following topic
Updates in the SAP System (BC-CST-UP)
http://help.sap.com/saphelp_47x200/helpdata/en/e5/de86e135cd11d3acb00000e83539c3/frameset.htm
Regards,
Siddhesh

I want to update the Custom table using the data available in ITAB.

Hi,
I want to updaste the Custom Table which is created by me (Ztable) using the data available in itab.(which i got from defferent standard tables)
I want to update the custom table using the itab data How is it possible?
Is any possible by using Modify ?
DPK.

example here
modifying datbase table useing internal table
advises before updating this datbase table plz lock that table to avoid incosistency
write the logic for modifying
Modify the database table as per new dunning procedure
MODIFY fkkvkp FROM TABLE lt_fkkvkp .
and finally unlock the table
example
*To lock table for further operations
constants: lc_tabname TYPE rstable-tabname VALUE 'FKKVKP' . "FKKVKP
CALL FUNCTION 'ENQUEUE_E_TABLE'
EXPORTING
tabname = lc_tabname
EXCEPTIONS
foreign_lock = 1
system_failure = 2
OTHERS = 3.
IF sy-subrc EQ 0.
To fetch all the contract accounts for customers of the segment
Households/SME.
PERFORM fetch_contract_accounts using lc_tabname .
ENDIF. " IF sy-subrc EQ 0.
*wrote the logic
Modify the database table as per new dunning procedure from internal table
MODIFY fkkvkp FROM TABLE lt_fkkvkp .
*unlock the tbale
CALL FUNCTION 'DEQUEUE_E_TABLE'
EXPORTING
TABNAME = uc_tabname .

How can i update the ADRT table REMARK field

How can i update the ADRT table REMARK field
by using only function modules or BAPI's not by direct update's
please help me
i need it urgently

Hi,
you can try this code:
    SELECT SINGLE * FROM KNA1 WHERE KUNNR = wa_kunnr.
    IF sy-subrc = 0.
      CLEAR adrct.
      SELECT SINGLE * FROM adrct WHERE addrnumber = kna1-adrnr.
      IF sy-subrc = 0.
        adrct-remark = wa_remark.
        MODIFY adrct.
      ENDIF.
    ENDIF
best regards,
Thangesh

Regardig error while updating the database table

hi experts,
   i m trying to update the database table from the values containig in my internal table ,,,but the system is giving this error plz help me::::
The type of the database table and work area (or internal table)
"ITAB_UPDATE" are not Unicode convertible. Unicode convertible.
my internal table name itab_update and the database table name yitab.i m using this statement::
    modify yitab from itab_update.

Hi
1. You have to Declare the Itab with the same structure as DB table.
2. Use the statement
    Modify <DBtable> from TABLE <itab>.
or
   Update <DBtable> from TABLE <itab>.
Hope this will solve.
Reward .....if so.
Regards.

How do I update the result table ?

I am having problem to design and update the competition results in WPC_RESULTS table.
I have 3 tables
1. WPC_COMPETITION - It has details of the competition to be conducted.
2. WPC_MEMBERS - Member details.
3. WPC_RESULTS - Competition results which will have Member_ID, Competition_ID and Status.
In Region 1. I have a drop down list from which I can select the Competition.
Problem is with region 2.
==================
In Region 2. I plan to have All the Member's Name from WPC_MEMBERS, a Status column (W=Win or L=Lost or X=NotPlayed) from WPC_RESULT which can be updated. But the table WPC_RESULTS dosenot have a primary key but has 2 foreign key one from WPC_COMPETITION and one from WPC_MEMBERS.
I am just not able to plan & create this region 2.
Can someone login to my wokspace and give me a helping hand.
Please mail me at [email protected] and I would give you the password for my workspace.
Regards,
Nikhil Karnik

My problem is since the WPC_RESULT table has two master tables. I cannot use a Master Detail form.
What I am trying is,
On a form which displays all the member in WPC_MEMBERS, Drop down list of competition name from WPC_COMPETITION table and a there should be checkbox for status column of WPC_RESULT. So my challenge is to update the WPC_RESULT table with the respective member id and competition id and status in WPC_RESULT table.
As you said I can use a PL/SQL, but I could not understand how do create my PLSQL block to identify each member on the form and update the competition status associated with that member.
in short the table definition is like
CREATE TABLE "WPC_COMPETITION"
(     "COMPETITION_NAME" VARCHAR2(100),
     "COMPETITION_CODE" NUMBER,
     "DATE_CONDUCTED" DATE,
     CONSTRAINT "WPC_PK1" PRIMARY KEY ("COMPETITION_CODE") ENABLE
CREATE TABLE "WPC_COMPETITION"
(     "COMPETITION_NAME" VARCHAR2(100),
     "COMPETITION_CODE" NUMBER,
     "DATE_CONDUCTED" DATE,
     CONSTRAINT "WPC_PK1" PRIMARY KEY ("COMPETITION_CODE") ENABLE
CREATE TABLE "WPC_RESULTS"
(     "COMPETITION_CODE" NUMBER,
     "STATUS" VARCHAR2(1),
     "MEMBER_ID" NUMBER
ALTER TABLE "WPC_RESULTS" ADD CONSTRAINT "WPKD_FK1" FOREIGN KEY ("COMPETITION_CODE")
     REFERENCES "WPC_COMPETITION" ("COMPETITION_CODE") ENABLE
ALTER TABLE "WPC_RESULTS" ADD CONSTRAINT "WPKD_FK2" FOREIGN KEY ("MEMBER_ID")
     REFERENCES "WPC_MEMBERS" ("MEMBER_ID") ENABLE
/

In OWB I need to update the target table with same field for match/update

In OWb I am trying to update the target table with the match and the update on the same field can this be done. I am getting a error match merge error saying you cannot update and match on the same field. But in SQl my select is
Update table
set irf = 0
where irf = 1
and process_id = 'TEST'
Hwo do i do this in OWB.

table name is temp
fields in the table
field1 number
field2 varchar2(10)
field3 date
values in the table are example
0,'TEST',05/29/2009
9,'TEST',05/29/2009
0,'TEST1',03/01/2009
1,'TEST1',03/01/2009
In the above example I need to update the first row field1 to 1.
Update temp
set field1 = 1
where field1 = 0
and field2 = 'TEST'
when I run this I just need one row to be updated and it should look like this below
1,'TEST',05/29/2009
9,'TEST',05/29/2009
0,'TEST1',03/01/2009
1,'TEST1',03/01/2009
But when I run my mapping I am getting the rows like below the second row with 9 also is getting updated to 1.
1,'TEST',05/29/2009
1,'TEST',05/29/2009
0,'TEST1',03/01/2009
1,'TEST1',03/01/2009

Update the Z table taking Max time.

Dear Friends,
I am updating a Z table for a sigle field value, I am doing it in loop and giving all the primary key fields in where condition, Its updating the records properly.
But The time is taking more if there are more records ( say 3000 + reacords ) , Now I am planning to update it in a single statement but the Sy-subrc is giving me 4 and the records were not updated in Z table.
pls let me know how to update the Z table in a single statement??
pls find the below code:
corent code:
    UPDATE zXX CLIENT SPECIFIED
                    SET zyy = it_finaldata-zyy
                 WHERE mandt = sy-mandt AND
                       matnr = it_finaldata-matnr AND
                       matkl = it_finaldata-matkl .
this is within a loop and working fine but taking max time more than 30 mins.
now I have moved all the data into anothere internal table ( the internal table is same like Z table )
I am using the below statement but its not working:
update zXX FROM table it_savedata.
Pls help me.
Thanks,
Sridhar

Hi
If u use update that line should exist in DB table otherwise the sy-subrc will be 4. You can use MODIFY statement . The advantage is that if a line exist it will modify that particular line otherwise it will create a new line in DB table.
MODIFY dtab FROM TABLE itab.
Regards
Sathar

Change the data in fieldcat and update the database table in alv oops

Hi,
my requirement is i have displayed a fieldcat in change mode and when i change the data and click on save it has to be updated the database table..
this has to be done using alv oops...

Hi,
This code will reflect all the changes into the internal table that is being displayed.
* to reflect the data changed into internal table
      DATA : ref_grid TYPE REF TO cl_gui_alv_grid. "new
      IF ref_grid IS INITIAL.
        CALL FUNCTION 'GET_GLOBALS_FROM_SLVC_FULLSCR'
          IMPORTING
            e_grid = ref_grid.
      ENDIF.
      IF NOT ref_grid IS INITIAL.
        CALL METHOD ref_grid->check_changed_data.
      ENDIF.
Now after this code is executed the internal table is modified as per the changes done in alv output.
Now you can use this internal table to update the database table.
Hope this helps you.
Regards,
Tarun

Any FM's or BAPI's to update the XRPM tables rpm_bupa_locat, rpm_bupa_0000

Similar Messages

Maybe you are looking for