How can i update the ADRT table REMARK field

How can i update the ADRT table REMARK field
by using only function modules or BAPI's not by direct update's
please help me
i need it urgently

Hi,
you can try this code:
    SELECT SINGLE * FROM KNA1 WHERE KUNNR = wa_kunnr.
    IF sy-subrc = 0.
      CLEAR adrct.
      SELECT SINGLE * FROM adrct WHERE addrnumber = kna1-adrnr.
      IF sy-subrc = 0.
        adrct-remark = wa_remark.
        MODIFY adrct.
      ENDIF.
    ENDIF
best regards,
Thangesh

Similar Messages

How can I update the trigger table?

I need a insert trigger on a table and also wants to insert the result value in one of its field.
it gives mutating error........
so wots the way of updating it? how can i update the same table.

For example like this (inside the BEGIN/END section of the trigger):
:NEW.Col2 := :NEW.Col1;
C.

How can i update the REMARK field in ADRT database table

Hi all,
How can i update the REMARK field in ADRT database table
By using Function modules or BAPIs
Please reply me fast

Hi,
you can try this code:
    SELECT SINGLE * FROM KNA1 WHERE KUNNR = wa_kunnr.
    IF sy-subrc = 0.
      CLEAR adrct.
      SELECT SINGLE * FROM adrct WHERE addrnumber = kna1-adrnr.
      IF sy-subrc = 0.
        adrct-remark = wa_remark.
        MODIFY adrct.
      ENDIF.
    ENDIF
best regards,
Thangesh

How can I update the project varibles in OBPM 10.3

Hi All,
OBPM version : 10.3.2 (weblogic Enterprise version)
How can I update the project variables from the External process?
I per my knowledge we use termination wait activity and notify the same from the external process. I am successfully do this but I am facing the performance issue with this and sometimes even data sources pool is getting exhausted.
Could you please tell me is there any other way to update the project variables?
Thanks in advance.
Narasimha
Edited by: Narasimha on Mar 2, 2011 4:19 AM

I do not disagree with Mark about using Message Waits to update project variables. I'm right in the middle of logic right now that is doing just that.
If you have thousands (or in your case millions) of instances to update all at once, you might want to also want to consider another approach. I obviously do not know your process and sure you've thought of this, but you could use a database to store this same information that you are currently using project variables for. You'd need a table that has the instance's unique id (e.g. case id, loan number, claim number) as the primary key and then have columns to store the information you are currently storing in project variables.
Taking this approach, you'd be updating the milliions of rows in the database very quickly. You could still have project variables in your process, but they would be set at the beginning of a Screenflow or in an Automatic activity using a SELECT statement against the database table using the unique id of the instance as the key.
Dan

How can I update a customized table from a text document?

Hi,
I am one sample file. The file is an text document. From this .txt file how can I update a customized table in SAP.
How can I Update the fields in the Customized table.
Thanks & Regards,
NManohar.

use the Function module GUI_UPLOAD or WS_UPLOAD and give the path and the file name from where the data has to be uploaded. in table parameter give the iternal table
CALL FUNCTION 'GUI_UPLOAD'
EXPORTING
    filename                      =
FILETYPE                      = 'ASC'
HAS_FIELD_SEPARATOR           = ' '
HEADER_LENGTH                 = 0
READ_BY_LINE                  = 'X'
DAT_MODE                      = ' '
CODEPAGE                      = ' '
IGNORE_CERR                   = ABAP_TRUE
REPLACEMENT                   = '#'
CHECK_BOM                     = ' '
VIRUS_SCAN_PROFILE            =
NO_AUTH_CHECK                 = ' '
IMPORTING
FILELENGTH                    =
HEADER                        =
tables
    data_tab                      =
EXCEPTIONS
FILE_OPEN_ERROR               = 1
FILE_READ_ERROR               = 2
NO_BATCH                      = 3
GUI_REFUSE_FILETRANSFER       = 4
INVALID_TYPE                  = 5
NO_AUTHORITY                  = 6
UNKNOWN_ERROR                 = 7
BAD_DATA_FORMAT               = 8
HEADER_NOT_ALLOWED            = 9
SEPARATOR_NOT_ALLOWED         = 10
HEADER_TOO_LONG               = 11
UNKNOWN_DP_ERROR              = 12
ACCESS_DENIED                 = 13
DP_OUT_OF_MEMORY              = 14
DISK_FULL                     = 15
DP_TIMEOUT                    = 16
OTHERS                        = 17
IF sy-subrc <> 0.
MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
        WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
ENDIF.
and finally use insert command to update the database table with the data

If record is in application server how do u update the single table

hi
could anybody tel me
if record is in application server how do u update the single table
by using direct input method

If your Flash player/plugin is older, the only way is to go to Adobe's site (use Limnos' link) and download the full installer. A .DMG file, which you doubleclick to have it mount on the desktop. Inside is the Flash installer app you doubleclick to run and have it upgrade all. Will need an Admin user account.
After you've upgraded to the latest & greatest, currently 11.5.502.110, a Flash perfpane will show up in System Preferences, where you can set it to auto-update itself, warn you of new updates or manually check for same.

How can I update the thumbnails in the slide panel when a slide has been changed?

When the text in a slide has been changed, how can you update the thumbnail in the slide panel to reflect this change?
We translated slides, but the slides in the slide panel are still in English.
Thanks for your help.

the slides should update automatically as you type
are you using a theme you created yourself, or one you have added for this show?
when you play the show, does the slides show correctly? If they are OK you could still show the presentation.
also what Mac are you using and what graphic crd is installed?

How can we update the last synchronization date and time..on SUP in sccm 2012 R2

Hi,
Can you any one please guide me how can i update the last synchronization date & time in SUP on SCCM2012 r2 , some how its updated as future date and when ever i try to synch the SUP with disconnected WSUS its shows in the wsyncmgr.log
"Wakeup for a polling cycle " and " Wakeupby inbox drop" and "Wakeup by SCF change"
Thanks
Balaji K

You'll probably have to call CSS on this one as this not normal by any means. The messages you noted above are completely normal but if that's all you are seeing then there's an issue.
Have you reviewed wcm.log and wsusctrl.log?
Jason | http://blog.configmgrftw.com | @jasonsandys

How can I update the firmware all at once

I'm a tech support in a school, approximately our school has over 500 laptops, how can I update the firmware on all laptops at once?

Apple Configurator is the software you want - and it's free from Apple. However, I'm dubious that firmware can be updated all at once.
http://help.apple.com/configurator/mac/1.4.1/

*How can we use the internal table in module pool programming? Clarify plz*

If we creating a screen using the table having four fields(for e.g.). The screen has the functions of display, modify, delete, save, exit etc for the fields. The front-end of the screen having I/O fields of the table using internal table. How can we declare the internal table in the screen?

HI,
Create one WA for your Internal table and then map it to your fields.
For Example,
Data : begin of wa,
          name(10),
          age type i,
           end of wa.
data : it like table of wa with header line.
Then in screen create input fields with the name, age and ***.
Then the user entered values are stored in name age and ***.
then you can manipulate with that values using wa.
Thanks.

When i try to update software for my 3rd Gen iPod Touch to version 5 i get the message 'This version of iTunes (9.2.1) is the current version'. My Mac OS is 10.4.11. How can I update the iPod software?

When i try to update the software for my 3rd Gen iPod Touch to version 5 i get the message 'This version of iTunes (9.2.1) is the current version'. My Mac OS is 10.4.11. How can I update the iPod software?

The later iOSs requires at least OSX 10.5.8 for the Mac. You need iTunes 10.5 but 10.4.11 only goes to 9.x.. 10.5.8 is a paid upgrade.
Are you sure that you have a 3G iPod? If it is 8 or 16 GB it is a 2G and those can only go to 4.2.1 (also requires 10.5.8 or later). A 32 GB can be either 2G or 3G. To identify yours:
Apple - Support - Check Your Service and Support Coverage
Identifying iPod models

How can i update the itunes in my external hard drive?

When i try to update the itunes on my external hard drive, it creates a new application in my computers hard drive. How can i update the one on my external hard drive?

there's no advantage to having the application on your external drive, you should leave it in your applications folder on your internal drive. if you insist on changing the app's location, you'll always have to then copy the app by hand to the external drive

How can I update the "basic" Adobe Flash Player that is in my Samsung Smart TV?

How can I update the "basic" Adobe Flash Player that is in my Samsung Smart TV?

Any update would come from Samsung, but in low-margin products like TVs, it's pretty uncommon for OEMs to provide ongoing maintenance over a large span of years. You may find that you'll get a better experience from a dedicated streaming box like ChromeCast/Roku/etc.

I have an iPad that I want to update to IOS 5.1. I have several apps that each were installed using a different iTunes ID. How can I update the IOS without losing the apps?

I have an iPad that I want to update to IOS 5.1. I have several apps that each were installed using a different iTunes ID. How can I update the IOS without losing the apps?

To update your phone requires using the latest version of iTunes, on your computer, as well as Internet access. The update to iOS 5.0 or higher is an erase/restore deal, so you not only have to make sure all of the content, currently on your phone, is on your computer and accessible, you need to update iTunes first, have Internet access, then update your phone. There is no way around this fact. You could go to an Apple store or use another computer, but you run the risk of losing all of your data it you do that.

HT4623 How can I update the IOS on my first generation IPAD? There is no software update option in my settings

How can I update the IOS on my first generation IPAD? There is no software update option in my settings

See the chart below to determine whether you can upgrade your device and what you can upgrade to. If you do not have a Software Update option present on your iDevice, then you are trying to upgrade to iOS 5 or higher. You will have to connect your device to your computer and open iTunes in order to upgrade.
IPhone, iPod Touch, and iPad iOS Compatibility Chart
     Device                                       iOS Verson
iPhone 1                                      iOS 3.1.3
iPhone 3G                                   iOS 4.2.1
iPhone 3GS                                 iOS 6.1.x
iPhone 4                                      iOS 6.1.x
iPhone 4S                                    iOS 6.1.x
iPhone 5                                      iOS 6.1.x
iPod Touch 1                               iOS 3.1.3
iPod Touch 2                               iOS 4.2.1
iPod Touch 3                               iOS 5.1.1
iPod Touch 4                               iOS 6.1.x
iPod Touch 5                               iOS 6.1.x
iPad 1                                          iOS 5.1.1
iPad 2                                          iOS 6.1.x
iPad 3                                          iOS 6.1.x
iPad 4                                          iOS 6.1.x
iPad Mini                                     iOS 6.1.x
=====================================
Select the method most appropriate for your situation.
Upgrading iOS
   1. How to update your iPhone, iPad, or iPod Touch
   2. iPhone Support
   3. iPod Touch Support
   4. iPad Support
     a. Updating Your iOS to Version 6.0.x from iOS 5
          Tap Settings > General > Software Update
     If an update is available there will be an active Update button. If you are current,
     then you will see a gray screen with a message saying your are up to date.
     b. If you are still using iOS 4 — Updating your device to iOS 5 or later.
     c. Resolving update problems
        1. iOS - Unable to update or restore
        2. iOS- Resolving update and restore alert messages

How can i update the ADRT table REMARK field

Similar Messages

Maybe you are looking for