Any function module to change planning hierarchy (tcode: MC92)?
I need to change planning hierarchy for product alloction.
I have tried to do it via transaction recorder, but some screens are missing when I tried to record it.
Could any one please advise if there is any function module that can serve the same purpose? Thanks.
Thanks Bhanu for ur quick reply.
Is that enough to change the technical name in the table RSZCOMPDIR.
Let me give some more information, idea is to change the technical name of all the queries present in a system based on a new naming conventions.
Eg.
Change all the technical name of queries ZQSAP to ZQXYZ.
If there is function module which allows to change the technical name of the queries that not only updates the table RSZCOMPDIR but also all the interlinked tables.
Similar Messages
-
Any function module to change the mode in Planning board
Hi guys,
Is there any function module to change the mode in Planning board?
I would like to call a custom screen to to chagne the mode since the strandard function cannot show enough info.
Thanks.Thanks Bhanu for ur quick reply.
Is that enough to change the technical name in the table RSZCOMPDIR.
Let me give some more information, idea is to change the technical name of all the queries present in a system based on a new naming conventions.
Eg.
Change all the technical name of queries ZQSAP to ZQXYZ.
If there is function module which allows to change the technical name of the queries that not only updates the table RSZCOMPDIR but also all the interlinked tables. -
Is there any function module to Change the System Status
Dear ABAPers,
I am working in the Customer Service Module.I want to change the System status.
Is there any function module to change the System Status.
Thanks & Regards,
Ashok.Hi Ashok
Service Order status update function module ?
How to set the system status
Check above threads,
Regards,
Syf -
Need BAPI function module to change routing (CA12 Tcode)
Hi Freinds,
i have bapi function module to create bapi_routing_create,
but i need bapi function module to ROUTE CHANGE.
tcode is ca12
pls help me out .....it's urgent to me
mail to me :[email protected]
regards
madhuThanks Jitendra,
I have tried to use it but I am not able to obtain a good result. I have set values for PLKO_DI_TAB and MAPL_DI_TAB, but it does not work…
What is missing? -
WANTED: Function Module (Product Allocation Planning Hierarchy Upload Tool)
Hi,
I would like to seek assistance in utilizing the <b>right function module</b> in uploading Product Allocation Planning Hierarchy to MC62.
I've tried direct table update and BDC but to no avial.
Points will be rewarded.
Thanks in advanceHi,
I'm having trouble using the FM 'MCP_GET_HIERARCHY'.
CALL FUNCTION 'MCP_GET_HIERARCHY'
EXPORTING
i_gstru =
IMPORTING
RETURN =
TABLES
t_filter =
t_char_values = .
What do I put in i_gstru, t_filter, and t_char_values?
I'm very new with this.
Thanks in advance for the help. -
Function Module for Changing delivery date
Hi Friends ,
I am held up with a scenario of changing the delivery date while creating purchase order. Could you please suggest any function module to change the delivery date in purchase order if it is less than 5 days.
With Regards ,
Sudhir S
Moderator message: please do some own research before asking.
Edited by: Thomas Zloch on Feb 21, 2011 11:45 AMHi praveen for u r requirement there is no need of any FM
Try this code
parameters:
p_date like sy-datum,
p_no type i.
data:
w_date like sy-datum.
w_date = p_date - p_no.
write: / w_date .
it is enogh for u r requirement
plzz reward if it is usefull...
for any further quiries my mail id is [email protected]
plzz dont forget to reward -
Function module to change date format
hi
is there any function module to change date format from 20080318 to 18.03.2008Hi,
Use this FM CONVERT_DATE_FORMAT Convert date from yyyymmdd to ddmmyyyy format
Regards,
Jyothi CH. -
Function module to change the date format
hi guys
is there any function module to change the date format
from 08/28/2007(mm/dd/yyyy)
to August 28, 2007.
regards
vamsihi vamsi.,
Use CONVERSION_EXIT_SDATE_OUTPUT to get the month name,
but it will give short form of the month name.
if you want <b>long description of the month</b>,
use this peice of code.
PARAMETERS: V_DATUM(07) TYPE C. "(example input:12-2007)
DATA: V_MON(2) TYPE C,
V_YEAR(4) TYPE C,
V_MONTHNAME(10) TYPE C,
V_FULLDATE(30) type c.
WRITE V_DATUM+0(2) TO V_MON.
SELECT SINGLE LTX FROM T247 INTO V_MONTHNAME
WHERE SPRAS = SY-LANGU
AND MNR = V_MON.
CONCATENATE V_MONTHNAME v_datum+3(4)
INTO V_FULLDATE SEPARATED BY SPACE. "(example output : December 2007)
write: v_fulldate.
<i><b>Reawrd points if useful</b></i>
Chandra -
Function module to change price of uploaded product
Hi Gurus,
is there any function module to change price of uploaded product info in crm
regards
Naveen
Edited by: Naveen Kumar on Feb 13, 2009 12:05 PMcondition record can modify using FM 'CNFPR_RECORD_PUT'
-
Function Module to Change Delivery?
Dear All,
Is there any Function Module to Change Delivery?
RegardsHi,
There are two BAPI's for it, one for inbound and other for outbound.
BAPI_INB_DELIVERY_CHANGE
BAPI_OUTB_DELIVERY_CHANGE
Please use the respective one.
If its useful, award points pls..
Regards,
Raju -
Function module which changes the Storage Unit (SU) Block Data like LS32
Hi,
Is there any Function module which changes the Storage Unit (SU) Block Data as done in LS32.
Thank you,
Prashanth A.Hello Pablo.
Yes we did run LT04 and it does encounter that same error message after clicking the Stock Removal button. But eventually error msg will be removed by entering the value at the Storage Unit Type field because it directly fills in LTAP-LETYP.
We have resolved that the function module will not really fill the desired Storage unit type therefore TO background creation is not feasible in our scenario (non-SU managed transfer to SU-managed storage type). And I found this thread too: http://scn.sap.com/thread/1947358
So issue is still open but we have considered of changing the process since this is still just a new scenario for us.
Thanks a lot for your inputs! -
Any function module to read all the values in Tcode-PPQD?
Hi all
Is there any function module to read all the values in Tcode-PPQD (Display Qualifiaction Catalog).
and any idea what tables are involved to get these values like parent and child relationship?
Thanks in advance.
Murali.Murali,
you can use the following..
data: w_sobid type sobid, "Qualification ID
w_objid type objid. "Qualification Catalog
select objid into w_objid
up to 1 rows
from HRP1001
where otype = 'QK'
and plvar = '01'
and istat = 1
and risgn = 'B'
and relat = '030'
and endda ge sy-datum
and begda le sy-datum
and sclas = 'Q'
and sobid = w_sobid.
endselect.
if sy-subrc eq 0.
write: / w_objid,w_sobid.
endif.
Regards,
Suresh Datti -
Functional Module for changing the field Reference Key 2 in Tcode FB02
HI,
I have a one requirement to change a field Reference Key2 (XREF2) in transaction FB02. This field appears in FB02 during (refer steps below):
u2022 In Initial screen after entering the Document Number, Company code & Fiscal Year then click on u201CEnteru201D
u2022 In next screen double click on u201CAccount u201C
u2022 In next screen click on u201CAdditional Datau201D. We will get a pop-up window where the field Reference Key2 (XREF2) is there.
We want to change this value of this field. Kindly let me know any Function Module available for this or any other suggestion.
Regards
NagaI don't know any such BAPI/FM (alas, many threads already) so i suggest you to use SHDB to build a batch input. FI_ITEMS_MASS_CHANGE should not solve your problem.
Regards -
Is there any function module for purchase order change
Hi Experts,
Is there any function module for purchase order change or i need to do new recording in me22n.
Thanks,
SenthilHi
Function module <b>BAPI_PO_CHANGE</b> enables you to change purchase orders. The Change method uses the technology behind transaction ME22N.
Regards,
Viven -
Any Function Module to Read Inspection Plan ?
Hi
Does anyone know any Function Module/BAPI to read the Insepction Plan( Or Inspection Plan Charecterstics) for a Meterial?
These inspection Palns will be created using Transaction QP01/QP02.
Thanks for your help.Hi,
Pl check whether any of the below will meet your requirement:
QDTA_INSPECTION_STAGES_READ
QDTA_INSPECTION_STAGE_READ
QDTA_INSPECTION_ST_READ_NO_BUF
Regards
Muraleedharan.R
Maybe you are looking for
-
Hi, I used the Image Processor feature to resize and save in a separate folder all the time in Bridge CS3. I recently upgraded to CS4 and I can't get the Image Processor to work. When I select the feature, it opens photoshop but nothing happens...it
-
I recently got a new iphone 4 w/iOs 7. I set up th eicloud, etc. and got my contacts and appointments from outlook. All was fine. Now it will not snyc/update my phone from outlook. I get "Your setup couldn't be started because of an unexpected error.
-
Can we Compare PDF Output with CSV format
Team, Can we Compare PDF Output with CSV format. In Excel I need to two text boxes asking us to browse the files and compare the files PDF & CSV format. Please suggest me if we have solution for this. Thanks! Kiran
-
Guru My client as maintained the Minium level stok in MRP2 view in material masterIs it posiable to to issue the material below level if not is their special setting or configration is their Pl guide me i Thanks Sudhir
-
Create Sales Order fromXI | Urgent
Hi All, I'm trying to create a sales order from XI through xml file into R/3. I have created Business and Technical systems for my R/3 Backend system in SLD and created Business and technical systems for my scenarion in SLD. I have done the map