Any idea on how to add timesheet entries?
I am trying to process time sheet data with Numbers. I have the "raw" data coming out of OfficeTime.
I now have something that looks like this (just a simplified excerpt):
10/24/07 2:15 PM 0:30 $0.00 Design - Draft Comments on this session
10/11/07 9:30 AM 0:45 $0.00 Design - Revision Comments on this session
10/10/07 9:30 PM 0:45 $0.00 Build - HTML Comments on this session
10/12/07 8:45 AM 0:30 $0.00 Build - Copy writing Comments on this session
I am looking for a report that looks something like what I have laid out below.
I am pretty sure if I can get there, I can then get to reports that actually compare initial budgets to actual results.. like below.
Is this something Numbers would do? Do I need to use Excel or Bento? I am hoping this isn't THAT difficult (and of course I would rather not use Microsoft anything if I can avoid it!)
Any help would be greatly appreciated!
Do a search for "Adding Time", "Time Series", etc., there has been several posts and solutions on this topic.
Regards,
Similar Messages
-
I have an ipod touch and have had it for about six months. I have not had any trouble with it but now it will not let me sync- I have downloaded cds to itunes but when I sync my ipod it does not put the cds on my ipod. I have downloaded new versions of itunes and synced multiple times but it still will not let me put them on my ipod. Any ideas on how to help with my problem?
liddodrea wrote:
Please help, I want to update Itunes but it will not allow me to with this issue.
iTunes free download from www.itunes.com/download -
How to add the entries and how to delete the entries from custom Z-table?
Hi Experts,
My requirement is I need to add the entries from program to three custom z-tables . Assume as zabc1,zabc2,zabc3.
Here how to add the entries from program to Z-table.???
And one more requirement is I want to provide a deletion checkbox in selection screen . Initial it was unchecked. If I am giving tick mark then the entries should be deleted from above custom Z-tables. this all will done in backgroung job?
Could you please guide me the logic how to crack this???
Let me know if you need more Info
Thanks
SanjuHi Sanjana,
What you can do is to use the ABAP keyword INSERT or MODIFY to add or modify records to a given database table. Here are the syntax taken from SAP documentation:
*Insert Statement
INSERT dbtab
Syntax
INSERT { {INTO target VALUES source }
| { target FROM source } }.
Effect
The INSERT statement inserts one or more rows specified in source in the database table specified in target. The two variants with INTO and VALUES or without INTO with FROM behave identically, with the exception that you cannot specify any internal tables in source after VALUES.
System Fields
The INSERT statement sets the values of the system fields sy-subrc and sy-dbcnt.
sy-subrc Meaning
0 At least one row was inserted.
4 At least one row could not be inserted, because the database table already contains a row with the same primary key or a unique secondary index.
The INSERT statement sets sy-dbcnt to the number of rows inserted.
Note
The inserted rows are finally included in the table in the next database commit. Up until this point, they can still be removed by a database rollback.
*Modify Statement
MODIFY dbtab
Syntax
MODIFY target FROM source.
Effect
The MODIFY statement inserts one or several lines specified in source in the database table specified in target, or overwrites existing lines.
System fields
The MODIFY statement sets the values of the sy-subrc and sy-dbcnt system fields.
sy-subrc Meaning
0 At least one line is inserted or changed.
4 At least one line could not be processed since there is already a line with the same unique name secondary index in the database table.
The MODIFY statement sets sy-dbcnt to the number of processed lines.
Note
The changes are transferred finally to the database table with the next database commit. Up to that point, they can be reversed using a database rollback.
Hope it helps...
P.S. Please award points if it helps... -
Any ideas on how to merge 2 reports on page to export to Excel or PDF?
This is for OBIEE 11g (we are currently running 11.1.1.6.8). We have a user requirement to put the prompt selections on each report that is exported to Excel or exported to PDF. This requirement has to do with auditors. We cannot use the Filter Criteria view because we have saved filters that contain other saved filters so not all of the filters are shown. What the users want is to just have the ability to Export to Excel or PDF for one report and add the prompt criteria so that it also shows in Excel or PDF. We know we can use presentation variables and create a narrative view to show all of the prompt criteria. But we don't want to have this in a view in the compound layout of every report on the page (we have many pages with many reports on them). What we would like to do is have the Export (to Excel or PDF) download the prompt criteria (like when you use the printable HTML and printable PDF functionality only we want this for one report). So think of merging the report that is being Exported to Excel or PDF with another report that is built to show the prompt criteria. Is anyone else doing this kind of functionality? Any ideas on how to do this with javascript?
We created an SR on this to find out if Oracle had some ideas but they did not and said that this is already an enhancement request ( Bug 8242921: ALLOW PROMPTS TO BE DISPLAYED WHEN DOWNLOAD TO EXCEL)
Any help would be appreciated. MarybethDid u tried the first method? i.e directly exporting the analysis to excel?
Thanks. -
My source audio isn't importing. Any ideas for how to fix?
The audio is there. I've watched it in VLC, and the audio is there. Whenever I import the footage, though, it goes missing. Any ideas for how to fix it?
Welcome to the forum.
First, more information would be useful. See this FAQ Entry for what info will help: http://forums.adobe.com/thread/961741?tstart=0
Also, when you Import your AV file, do you allow PrPro time to Conform the Audio portion? For more info on Conforming, Indexing and PEK file creation, see this article: http://forums.adobe.com/message/3892177#3892177
Good luck,
Hunt -
I-photo: I used 2 cameras to take pictures on a trip --- i have put the pictures from both cameras into an album --- when i click on view and then sort by date, the pictures do not sort by date --- any ideas on how to get the pics sorted by date?
Select all the photos that you need to change, then click the "Photos" menu and choose "Adjust Date and Time".
If you add a year, it will adjust all the photos that you selected by adding a year (so if you accidentally select one of the photos that already has "2012", that will change to "2013"). -
I just installed OS X Yosemite on my MacBook. I now cannot get the computer to start up. If I hold down the power button to try and power it back up, it will not start. Any ideas on how to fix this?
Reinstalling OS X Without Erasing the Drive
Boot to the Recovery HD: Restart the computer and after the chime press and hold down the COMMAND and R keys until the menu screen appears. Alternatively, restart the computer and after the chime press and hold down the OPTION key until the boot manager screen appears. Select the Recovery HD and click on the downward pointing arrow button.
Reinstalling OS X Without Erasing the Drive
Repair the Hard Drive and Permissions: Upon startup select Disk Utility from the main menu. Repair the Hard Drive and Permissions as follows.
When the recovery menu appears select Disk Utility and press the Continue button. After Disk Utility loads select the Macintosh HD entry from the the left side list. Click on the First Aid tab, then click on the Repair Disk button. If Disk Utility reports any errors that have been fixed, then re-run Repair Disk until no errors are reported. If no errors are reported click on the Repair Permissions button. Wait until the operation completes, then quit Disk Utility and return to the main menu.
Reinstall OS X: Select Reinstall OS X and click on the Continue button.
Download and install the OS X Yosemite 10.10.3 Combo Update.
Note: You will need an active Internet connection. I suggest using Ethernet if possible because it is three times faster than wireless.
Alternatively, see:
Reinstall OS X Without Erasing the Drive
Choose the version you have installed now:
OS X Yosemite- Reinstall OS X
OS X Mavericks- Reinstall OS X
OS X Mountain Lion- Reinstall OS X
OS X Lion- Reinstall Mac OS X
Note: You will need an active Internet connection. I suggest using Ethernet
if possible because it is three times faster than wireless. -
Hi, I'm working on a document in PAges 09. Any idea on how to change the document color? I want it black instead of white.
Nichelle,
You must add your own background object, and then make it Black.
Insert > Shape > Rectangle
In the Wrap Inspector, set to Floating.
In the Graphic Inspector, set Stroke to None and set Fill to Black.
Grab the corners of the document and stretch the document to cover the entire page.
Back in the Wrap Inspector select "In Background".
Format > Advanced > Move Object to Section Master.
Regards,
Jerry -
How to Add multiple entry to the group policy security filtering
How to Add multiple entry to the group policy security filtering
Is there any way we can add multiple entry to the Domain group policy Security filtering tab.Currently its not allowing to add more then one entry at a time.
Getting Error like "only one name can be entered,and the name cannot contain a semicolon.Enter a valid name"Hi
Are you trying to add more users or groups through Group Policy Management Security Filtering tab?
Try right clicking on the policy and then edit
Then in Editor Right click on the name of the policy and Properties
Security tab and add user or group from this tab. Just make sure if you are adding user or groups "Select this object type" has
the correct option also "From this Location" is set to your entire directory not the local server.
Update us with the above.
Thanks -
My computer has slowed down, my computer has slowed down,any ideas on how to speed it up
My MAC has slowed down,any ideas on how to speed it up?
How much free disk space do you have?
You may want to run these "standard" fixes if the problem persists.
1) Check the amount of free space on your harddrive. You should have a several gigs free.
2) You should run disk utility
a) verify the disk
b) update your permissions.
3) Try a safe boot.
Shutdown your machine. Hold down the shift key. Poweron. Wait awhile Wait awhile while you harddrive
is being checked.
http://support.apple.com/kb/ht1455
4) You may want to run applejack to clean up your machine.
http://applejack.sourceforge.net/
a lot more ways to fix your Mac.
http://www.thexlab.com/faqs/faqs.html
Look at what is happening with your Mac when you run Activity Monitor.
Macintosh-HD -> Applications -> Utilities -> Activity Monitor
1) Be sure you select all processes in the double arrow selection just be low the window title line.
2) Click on the CPU tab on the lower half of the window to see how much time you are using and if any applications are hogging the CPU.
3) Be sure the triangle in the CPU title is in the down position. This will list the processes from high to low.
You can gain some understanding of Activity Monitor by looking at it every once in a while. Look at the small graph.
Here is how I have my CPU display set up:
Do you need more cpu memory.
Click on System Memory to get statistics on memory usage. You should have some free memory.
The number to look at is page outs.
Mine is 13397. This means that some of my programs and data had to be written to disk because cpu memory filled up for a time. It means my programs ran a little slower than they could have. I could run fewer programs, deal with the slowness, or buy more memory. I'd say you want at least 512meg of memory for 10.4.
If the entry for entry for Page ins/outs is:
Page ins/outs: 29163/0
Notice I have 0 pageouts which says that I am not using my harddrive for extra memory space. Thus, I have enough memory.
Activity Monitor has a neat feature where it can display a dynamic dock icon. In Activity Monitor View > Dock icon > Show cpu history.
"Reading system memory usage in Activity Monitor :"
http://docs.info.apple.com/article.html?artnum=107918
Managing Memory
See Kappy
http://discussions.apple.com/message.jspa?messageID=8025223#8025223
Problems from insufficient RAM and free hard disk space
http://thexlab.com/faqs/lackofram.html -
Today all my BookMarks disappeared in Safari, when I checked my iphone I watched them disappear from there and the same on my iPad. I then thought why not check my Parallels side and Windows Explorer. They were there for a few seconds and then also gone. Any ideas on how to restore and stop this from happening again? My iCloud setting are set for Safari sync.
Then you have misunderstood what iCloud is.
First. It is not a back-up service. It is a sync service.
That distinction is very import. A back-up service would have backed-up your bookmarks but iCloud's function is to synchronize your data, in this case your bookmarks, to all your devices. A backup service, by it's very nature, would allow you to roll back to a previous version of your data or file. No such roll back function is present in iCloud's services.
For example, if you add a bookmark to Safari on your Mac that same bookmark will be added to all your other devices that are connected to your iCloud account. Also, if you delete a bookmark it will be deleted from all those devices.
iCloud does not make a distinction between deleting one or all of your bookmarks and it will do the same to all your devices. It does not know that was not your intention. That is why it is very important to have Backups and Apple makes it very easy using Time Machine and a simple hard drive connected to a computer.
Let's see if your bookmarks have actually been deleted or if there is another problem.
Your bookmarks are stored in a .plist file the following directory, ~/library/Safari/Bookmarks.plist
To get to that directory go to the Finder, select the Go to Folder… menu item in the Go menu and enter ~/library/Safari/ in the field provided. There you will find the Bookmarks.plist file.
Select it and hit the space bar on your keyboard to see a preview of the files content. Does it still contain references to your bookmarks? If it does still contain references to your bookmarks then something else is going on and we'll have to find a different solution. -
Any ideas on how I can reasonably priced get two decent smartphones with one upgrade?
I have 4 phones, 700 shared minutes and unlimited text. Already costs 160 bucks. Would love to make 2 phones data package leave other 2 talk/text; only one upgrade available. any ideas on how i can make this happen without having to sell my first born?
are you asking about purchasing the 2 smartphones, or about the monthly plans? because both will be fairly expensive. the new share everything plans would cost you $190 (prior to taxes) per month just to share 1 gig between the 2 smartphones....$210 to share 4 gigs (prior to taxes). you may be able to keep your current plan and add 2 data packages at $30 each. that would be $220/month (based on you stating that you currently pay $160). if you only have one upgrade available, then your best bet would be to call and ask verizon about a certified preowned device (usually about half price of the full retail price) or check out ebay. i believe the cheapest smartphones start at $400 (and they are the very low end smartphones). you can find pretty nice ones on ebay for $200-300.
-
Just bought a used Oct '13 MacBook Pro and I can't sign into the App Store as it still displays the old owners user ID in the login box (in fixed grey text). Any ideas of how I what I could do? Thanks.
The first thing you should do with a second-hand computer is to erase the internal drive and install a clean copy of OS X. How you do that depends on the model, and on whether you already own another Mac. If you're not sure of the model, enter the serial number on this page. Then find the model on this page to see what OS version was originally installed.
1. You don't own another Mac.
If the machine shipped with OS X 10.4 or 10.5, you need a boxed and shrink-wrapped retail Snow Leopard (OS X 10.6) installation disc, which you can get from the Apple Store or a reputable reseller — not from eBay or anything of the kind. If the machine has less than 1 GB of memory, you'll need to add more in order to install 10.6. I suggest you install as much memory as it can take, according to the technical specifications.
If the machine shipped with OS X 10.6, you need the installation media that came with it: gray installation discs, or a USB flash drive for some MacBook Air models. If you don't have the media, order replacements from Apple. A retail disc, or the gray discs from another model, will not work.
To boot from an optical disc or a flash drive, insert it, then reboot and hold down the C key at the startup chime. Release the key when you see the gray Apple logo on the screen.
If the machine shipped with OS X 10.7 or later, you don't need media. It should boot into Internet Recovery mode when you hold down the key combination option-command-R at the startup chime. Release the keys when you see a spinning globe.
2. You do own another Mac.
If you already own another Mac that was upgraded in the App Store to the version of OS X that you want to install, and if the new Mac is compatible with it, then you can install it. Use Recovery Disk Assistant to create a bootable USB device and boot the new Mac from it by holding down the C key at the startup chime. You will need the Apple ID and password that you used to upgrade. Note that if your other Mac was never upgraded in the App Store, you can't use this method.
Once booted from the disc, the USB device, or Internet Recovery, launch Disk Utility and select the icon of the internal drive — not any of the volume icons nested beneath it. In the Partition tab, select the default options: a GUID partition table with one data volume in Mac OS Extended (Journaled) format. This operation will permanently remove all existing data on the drive, which is what you should do.
After partitioning, quit Disk Utility and run the OS X Installer. When the installation is done, the system will automatically reboot into the Setup Assistant, which will prompt you to transfer the data from another Mac, its backups, or from a Windows computer. If you have any data to transfer, this is usually the best time to do it.
You should then run Software Update and install all available system updates from Apple. If you want to upgrade to a major version of OS X newer than 10.6, get it from the Mac App Store. Note that you can't keep an upgraded version that was installed by the previous owner. He or she can't legally transfer it to you, and without the Apple ID you won't be able to update it in Software Update or reinstall, if that becomes necessary. The same goes for any App Store products that the previous owner installed — you have to repurchase them.
If the previous owner "accepted" the bundled iLife applications (iPhoto, iMovie, and Garage Band) in the App Store so that he or she could update them, then they're linked to that Apple ID and you won't be able to download them without buying them. Reportedly, Apple customer service has sometimes issued redemption codes for these apps to second owners who asked.
If the previous owner didn't deauthorize the computer in the iTunes Store under his Apple ID, you wont be able to authorize it under your ID. In that case, contact iTunes Support. -
I cannot get a dvd to play on my computer. The error message says in iDVD is "media type not supported".
The DVD was produced with a video camera and is in HD format. I think the the format is .m2ts?
Any ideas on how to get this to play?Check out > Mac App Store - Free MTS M2TS Converter
and/or others at > playing .m2ts format in OS X - Google Search -
i have purchased itunes match but the cloud will not load on my ipad 4.it works on my iphone 5 & it originally worked on my ipad.the only music that will show up is stuff that i bought from the itunes store.any ideas on how to get this to work?
On the MBP, in iTunes, switch to Song view and enable the iCloud Status column by pulling down View > View options and selecting the option for "iCloud Status." Close the small window. Look for any tracks that have a status of "waiting." If you see several of them disable iTunes Match while holding down the Option key. Quit iTunes, wait a few seconds, then open it again and turn iTM back on. Let it compelete the scan. Wait until all tracks that are "waiting" have a status of either "matched" or "uploaded."
On the iPad, turn off iTunes Match then launch the Music app and let the contents clear out. Power cycle the iPad for good measure, then re-enable the service once all the tracks in iTunes have been processed.
Maybe you are looking for
-
Hi all, I just got back from a two week vacation, which happened to be just about a week after 1.4. First off, before my vacation, I noticed a couple of weird things happening: Universal search wasn't working, except for applications and phone numbe
-
Since the latest upgrade of Itunes the play count of many of my tracks has automatically reset to 0 for some unknown reason. Also I display Track Name/Artist/Album on my Itunes and on a number of occasions they display incorrect information and when
-
hi give me description about UAT with Test Script in MM
-
Displaying Selection screen information
In ALV output screen, i want to display the selections made by the user along with the output data. How to do so? Also give sample code.
-
[Cisco FAQ] - DCM Gbe input port is not joining Multicast stream
Why does it do this and how do I fix this issue?