Any idea why British Eurosport stopped working. Have reinstalled app and reset network settings.

The app suddenly stopped working.
Any ideas ?

Yes to 1st and No to 2nd.
I already contacted British Eurosport , it was them that suggested reinstalling the app.
I don't know of anything that has changed since it did work.
Thanks for your reply.

Similar Messages

I'm trying to update my apps using the creative cloud desktop app. I can't see any apps in the app tab, the wheel just spins round and round and nothing happens. Has anyone got any ideas? I've tried uninstalling the desktop app and reinstalling but it sti

Hi
I'm trying to update my apps using the creative cloud desktop app. I can't see any apps in the app tab, the wheel just spins round and round and nothing happens. Has anyone got any ideas? I've tried uninstalling the desktop app and reinstalling but it still has the same problem.
Cheers
Rachel

Hi Rachel,
You can follow the article: App doesn't open | Progress wheel spins continually to get your issue fixed.
Let us know if the issue still persists or not.
Regards,
Ratandeep Arora

I have iPhone 6, 8.3. I cannot use bluetooth at all from my device, even to connect my macbook pro. I did all the recommended trouble shooting such as reboot and reset network settings. but it does not recognise any bluetooth device. Pls help.Thank

I have iPhone 6, 8.3. I cannot use bluetooth at all from my device, even to connect my macbook pro. I did all the recommended trouble shooting such as reboot and reset network settings. but it does not recognise any bluetooth device. Pls help.Thank you.

See iPhone BT profile on what can be connected/paired:
iOS: Supported Bluetooth profiles - Apple Support
And BT troubleshooting:
iOS: Troubleshooting Bluetooth connections - Apple Support

Any ideas why the sound only works on about half of my apps?

Any ideas why the sound on my ipad only works on about half of my apps?

The problem of tracks becoming de-linked between iTunes and the music files in your iTunes music folder happens for different reasons - this seems to come up fairly commonly in this forum.
The solution can be to locate each song in the iTunes library, as you mentioned - or, but wait, before I get to that...
trouble finding the original track in your iTunes music folder? maybe look for it under compilations, or if not using the 'group compilations preference' then look in the folder under the songs artist name, but what song artist name iTunes uses depends on what you have in the metedata tag spot for album artist or song artist. Any varyation in artist name spelling, in the menu item 'get info' metadata for any selected individual track will cause iTunes to create that as a separate artist folder in the library, even names like 'various' or any difference at all (even the word 'the' can change where in your iTunes music folder a track gets placed by iTunes). You can try to use the finder function of find file (finder munu item outside of iTunes) to locate hard to find items.
Back to how to re-link any de-linked tracks .
There may be scripts that can help re-link de-linked music files - or, at least provide you a list of such files, Scripts are easy to install and use...
at Dougs Scripts, there is one called iTunes Track CPR that might work
http://dougscripts.com/itunes/scripts/ss.php?sp=itunestrackcpr
or, if you just want a list of de-linked tracks, go to
http://dougscripts.com/itunes/
and find the script called List MIA's, this will create a text file listing all de-linked tracks
if you review the thread at
https://discussions.apple.com/thread/3633708
also the thread at
https://discussions.apple.com/message/17513078#17513078
you may find more insight into dealing with this kind of issue there, although some of that thread may not apply to your case, aspects of it might help.
Good luck.

Any idea why setSubject() is not working as expected??

I am using SmtpMessage's setSubject:
setSubject( "some subject" )
but the email I receive says "no subject"
I have made sure that the subject is being set correctly in the code.
The email is received and the content of the email (set via setContent) is exactly as I had set it.
But the subject is missing even though I set it.
Any idea why this is happening?

Nope.
Is there anything unusual about the text you're using
for the subject? Any newlines, for instance?
If you turn on session debugging, do you see the
subject in the protocol trace?

IE6/CSS browser issue- any idea why this is not working?

http://www.wilmerdds.com/test/index.htm
If you look at the left column, you will see a black box. It shouldn't be black. it should match the bg color of the column. Any idea why this is happening?

Hi
The problem is that you are using a png, and IE6 does not support png transparency. You could try using the iepngfix from - http://www.twinhelix.com/css/iepngfix/.
PZ

Fter using ccleaner Download helper Stopped Working Have tried UninStalling And Reinstalling it

After Using Cccleaner My Download Helper Stopped Working.I tried UninStalling And Reinstalling It Did not Help The Icon is Still on The Left Upper Corner But It Does not rotate

Which Firefox settings did you clear with CCleaner?
You can check for problems with the localstore.rdf file.
*http://kb.mozillazine.org/Corrupt_localstore.rdf
*https://support.mozilla.org/kb/Toolbar+keeps+resetting
You can also try to reset the dwhelper prefs on the <b>about:config</b> page.
*http://kb.mozillazine.org/about:config
*http://kb.mozillazine.org/Resetting_preferences
*http://kb.mozillazine.org/Preferences_not_saved

My wifi wasn't working for more than 10 minutes at a time after updating to IOS8 and resetting network settings. I turned off google drive, turned off Bluetooth, reset network settings and rebooted my iPad4. So far so good.

I have an ipad4. Wifi keeps cutting out after the upgrade even after I forget the network and resign on or reset all network settings. I deleted iCloud drive from my iPad, turned off Bluetooth, reset network settings, and rebooted my iPad. Since I upgraded to IOS8 this is the longest wifi has consistently been working for me. Which is approximately an hour now. Anyone else find that this worked or have figured out if this or anything out there is a permanent fix?

Hi CollinGCC78,
It sounds like you have been on the right track in troubleshooting this issue. If you are still having issues, you may want to double-check the steps outlined in the following article, in order if possible (apologies for replicating any steps you have already taken):
iOS: Troubleshooting Wi-Fi networks and connections
Regards,
- Brenden

Any ideas why this won't work?

I appreciate all the help this board provides. I've learned a ton coming here as I continue to grow my SQL knowledge.
I need this query to look at the Work_order table and pull any lines that were closed during the prior day. Then I need it to look at the Stock_Tran table and pulled and lines that had a Date_Trans during the prior day. That will give me the work completed and the work that was partially completed during the prior day.
I'm getting an error message at the line I've underlined and bolded that work_order.partno is an invalid identifier (I'm sure that's not the only error). The query worked until I started adding the Stock_Tran table.
Any ideas would be greatly appreciated!!!
SELECT
SITECODE
, WORK_ORDER_NUMBER AS "WO #"
, partno
, WO_PRIORITY AS "PRIORITY"
, QTY_WORK_ORDER
, QTY_FINISHED
, TRUNC(WO_RELEASE_DATE) AS "RELEASE DATE"
, TRUNC(WO_START_DATE) AS "START DATE"
, TRUNC(WO_CLOSED_DATE) AS "CLOSED DATE"
, STOCK_TRAN.QTY_CHANGE
FROM
WORK_ORDER
, (SELECT SUM(QTY_CHANGE) AS "QTY WORKED" FROM STOCK_TRAN
WHERE
SITECODE = 'FCI'
AND STOCK_TRAN_CODE = 'P'
AND DATE_TRAN = TRUNC(SYSDATE - 1)
AND WORK_ORDER.SITECODE = STOCK_TRAN.SITECODE
AND WORK_ORDER.PARTNO = STOCK_TRAN.PARTNO)_
WHERE
WORK_ORDER_TYPE = 'K'
AND SITECODE = 'FCI'
AND (TRUNC(WO_CLOSED_DATE) = TRUNC(SYSDATE - 1) OR STOCK_TRAN.DATE_TRAN = TRUNC(SYSDATE -1) )
AND QTY_FINISHED >0
ORDER BY WO_PRIORITY DESC

Hi,
847497 wrote:
That gets me closer! Thanks. Now I've getting an error at the line highlighted below.
Here's the error I'm getting: ORA-00904: "STOCK"."QTY_CHANGE": invalid identifier
SELECT
SITECODE
, WORK_ORDER_NUMBER AS "WO #"
, partno
, WO_PRIORITY AS "PRIORITY"
, QTY_WORK_ORDER
, QTY_FINISHED
, TRUNC(WO_RELEASE_DATE) AS "RELEASE DATE"
, TRUNC(WO_START_DATE) AS "START DATE"
, TRUNC(WO_CLOSED_DATE) AS "CLOSED DATE"
* , STOCK.QTYCHANGE*_I assume you mean this is the line where the error message points. It would be better to mark it with a comment, like this:
, STOCK.QTY_CHANGE -- ***** ORA-00904 occurs here ***** FROM
WORK_ORDER
, (SELECT SUM(QTY_CHANGE) AS "QTY WORKED"
, sitecode
, partno
, date_tran
FROM STOCK_TRAN
WHERE SITECODE = 'FCI'
AND STOCK_TRAN_CODE = 'P'
AND DATE_TRAN = TRUNC(SYSDATE - 1)
GROUP BY sitecode, partno ) stockThe only columns in the stock "table" (it's acutally an in-line view) are "QTY WORKED", SITECODE, PARTNO amnd DATE_TRAN.
If QTY_CHANGE is a column in the STOCK_TRAN table, then yiou can include it in the SELECT clause of the in-line view, and that will allow you to use it in the main query.
WHERE stock.sitecode = work_order.sitecode
AND stock.partno = work_order.partno
AND WORK_ORDER_TYPE = 'K'
AND work_order.SITECODE = 'FCI'
AND (TRUNC(WO_CLOSED_DATE) = TRUNC(SYSDATE - 1) OR STOCK.DATE_TRAN = TRUNC(SYSDATE -1) )
AND QTY_FINISHED >0
ORDER BY WO_PRIORITY DESC

Any Ideas Why Workspace Won't Work?

Okay, so it's been bugging me too long to simply continue ignoring the problem... and even still after updating all of the CS6 applications, the problem of the Workspace always being messed up every time I launch CS6 Photoshop 13.0.1 x64 Extended on my Win 7 64-bit machine persists. Any suggestions will be appreciated.
To help communicate the problem and better understand it, I've prepared this series of screen captures.
The two Workspaces used in these experiments were 1) VKB's Workspace, a preexisting Saved workspace and 2) Essentials, the preexisting workspace defined by Adobe.
The experiments consisted of launching the application, observing that the workspace was messed up (Exhibits A, C, D and E), then Resetting the Workspace, closing the application and then opening it again.
During the course of these experiments I updated the (3) CS6 applications that the updater indicated had available updates, one of which was PS. The announcement on the page (http://forums.adobe.com/community/photoshop/general) indicated 13.0.1.1 was available, but after updates were install, PS reports what I thought I remembered seeing earlier; i.e., 13.0.1 (and not 13.0.1.1). Restarted the system, system would not shut down, would not restart, no video signal, had to give it the finger and force hard restart. Launched PS app, did another check for updates - all apps up to date.
Began experiments anew - nothing different - Workspace still doesn't work like it always had behaved up until when this issue first presented... maybe a month or three weeks ago - not really sure exactly when.
The Resetting was done from both the menu Window, Workspace, Reset route and the afforded pull down option (upper right corner).
Additionally, during the experiments I created a new workspace, also named VKB's Workspace, replaced the earlier one, more experiments, more of the same problem.

Any ideas will be appreciated.
Thanks!
Kelly

Urgent help!! In 'export audio to movie' the final option to disable the original audio has disappeared. I am no longer allowed to deselect the audio tracks. Any ideas why Logic has stopped this?

Greeting all
I'm creating a movie with a new music track and follow the appropriate steps as in the manual:
Choose format options for the bounced audio file, and click OK.
In the dialog that appears, enter a name and target folder for the movie, and click Save.Another dialog opens, allowing you to choose which of the original movie’s audio tracks should be used in the new movie.
Select the audio track that you want to retain in the new movie, and click OK.
The QuickTime movie is exported to the selected folder; it contains all selected audio tracks, plus the part of your project that is encompassed by the start and end points of the QuickTime movie.
However, this final dialog option 'select the audio tracks of movie to keep in new movie' has disappeared!!! For some reason Logic goes straight to bouncing without the offer to remove the original audio. My final movie ends up with both sets of audios. Any ideas please???
Best
Juan

It is still there and Logic did not remove it.
Did you do some trouble shooting.
Try to load a different video (with different codec) to see if it is video file related
Try a new (empty) project to see if it is project related
Try to remove Logic preferences (move the original back if this wasn't the problem because the file contains other info you might not want to lose)
Hope that helps
Edgar Rothermich
http://DingDingMusic.com/Manuals
'I may receive some form of compensation, financial or otherwise, from my recommendation or link.'

I am having trouble using reverb of any kind; it does not sound natural, but rather "pixilated." Does anyone have any ideas for a solution? I have used Silververb and Space Designer and am having the same problem...

I am using Logic Pro 9 with two MXL 990 microphones in my piano and a Rode NT1A for vocals. I have tried recording with added reverb and keeping getting not a natural reverb sound, but a rather "pixilated" one that does not sound natural. Does anyone have any ideas on how to solve this issue? I have tried using Silververb and Space Designer, and both result in the same problems. Thank you!

This is asking for the impossible! It does not sound natural because maybe it isn't and in judging so whats your reference anyway. If you are in dire need of some natural sounding room you can go and record it yourself. But even then, the chances that it sounds like you imagined it, are very slim.
There are very decent sounding reverberation plugins, based on artificial reverb generators or convolution-style, the last one is said to sound more 'natural' then the first one. Be it as it maybe, it really is like cooking food. You got all the ingredients for this delicious taste at hand and believe it or not to reach a satisfying result this is not enough, because if you do not mix the ingredients in the right proportion you will end up with a different dish you thought you'll get. This is exactly the same when one would mix audio, I dare say.
So treat yourself to some good ingredients and the rest is up to you, namely: taste and experience!
And looking at some of my past music productions I always find the same plugins for the 'ambient' task:
Altiverb by Audio Ease when I have acoustic ensembles (classical music mostly), the Sony Oxford Reverb in studio productions, Bricasti when I have to deal with drums and MMultiBandReverb from MeldaProduction for all-round stuff. Thats the base I start from, after that I can end up with dozen Reverb plugins which basically all are doing the same thing but just in a tiny different way.

TS3899 Any idea why my ntlworld(Virgin) emails have stopped arriving on my iPad Mini? When first added I got 18000+ emails copied over (probably every one I ever got on the desktop!) & got emails daily, but it just stopped. Flags up can't connect..desktop

If you have your first baby after 35, you're an elderly prima gravidas; well I'm a proper elderly prima iPad user....when I first added my email account to my wonderful new iPad Mini it all seemed so simple. I had over 18,000 emails immediately on the iPad (probably eberything ever received on desktop) and was receiving emails daily (most but not all that arrived on desktop) but its just stopped. No emails at all. When I go to Mail, it flags up "The mail server 'imap.ntlworld.com' is not responding. Verify that you have entered the correct account into Mail settings."
I haven't changed anything from when it worked fine....I've sent a query to Virgin Media too.
Internet's fine. Frustrating. Thanks for any help. (I tried to do Apple support on iPad but of course they want to email me on device...)

iOS: Unable to send or receive email
http://support.apple.com/kb/TS3899
Can’t Send Emails on iPad – Troubleshooting Steps
http://ipadhelp.com/ipad-help/ipad-cant-send-emails-troubleshooting-steps/
Setting up and troubleshooting Mail
http://www.apple.com/support/ipad/assistant/mail/
Server does not allow relaying email error, fix
http://appletoolbox.com/2012/01/server-does-not-allow-relaying-email-error-fix/
Why Does My iPad Say "Cannot Connect to Server"?
http://www.ehow.co.uk/info_8693415_ipad-say-cannot-connect-server.html
iOS: 'Mailbox Locked', account is in use on another device, or prompt to re-enter POP3 password
http://support.apple.com/kb/ts2621
The iPad's Mail app has no provisions for creating groups. However, you can use a third party app that many users recommend.
MailShot - https://itunes.apple.com/us/app/mailshot-pro-group-email-done/id445996226?mt=8
Group Email - https://itunes.apple.com/us/app/group-email!-mail-client-attachments/id380690305 ?mt=8
iPad Mail
http://www.apple.com/support/ipad/mail/
Configuration problems with IMAP e-mail on iOS with a non-standard SSL port.
http://colinrobbins.me/2013/02/09/configuration-problems-with-imap-e-mail-on-ios -with-a-non-standard-ssl-port/
Try this first - Reset the iPad by holding down on the Sleep and Home buttons at the same time for about 10-15 seconds until the Apple Logo appears - ignore the red slider - let go of the buttons. (This is equivalent to rebooting your computer.)
Or this - Delete the account in Mail and then set it up again. Settings->Mail, Contacts, Calendars -> Accounts Tap on the Account, then on the red button that says Remove Account.
 Cheers, Tom

Any Ideas Why LASTDATE Isn't Working as Expected?

I have a measure ...
Inventory Quantity:=CALCULATE (
SUM ( [PosNetProjdQty] ),
LASTDATE ( Calendar[CLNDR_WK_BEG_DT] )
... which when added to a Pivot Table I'd expect a YEAR subtotal to equal the December Ending MONTH value. Instead, it's summing all of the months in the year. Any clues as to why this might not be performing as expected?

Hi Mark,
Is this still an issue? LASTDATE is a very peculiar DAX function as explained
here. Is there any chance that you could provide a sample workbook with non-sensitive data that can be used to look into the unexpected behaviour in your scenario?
Regards,
Michael Amadi
Please use the 'Mark as answer' link to mark a post that answers your question. If you find a reply helpful, please remember to vote it as helpful :)
Website: http://www.nimblelearn.com, Twitter:
@nimblelearn

IPhone 4 screen will not work...have to double tap icons to open...can not slide to other pages from main screen...any idea how to fix it? Have done a hard reset to no avail.

The main screen on my Iphone 4 seems to be locked. I have to double tap icons to open. In the keypad screen I have to double tap numbers to dial. I have tried to reset using both the back button and the power button. Has anyone experienced this or know how to fix it? Any help is appreciated!

You are a genius!!!! Thanks so very much! It seems my voice over was one...I have no idea how that happened! Thanks again! Have a great day!

Any idea why British Eurosport stopped working. Have reinstalled app and reset network settings.

Similar Messages

Maybe you are looking for