Any one help me with dual screen?

I am trying to get my LCD monitor work, which is plugged in VGA.
However, when i using "xrandr --output VGA --auto" to set it up, i get this failure "xrandr: cannot find crtc for output VGA"
i am using intel graphic card, and the result of "xrandr -q --verbose" is as follows,
Screen 0: minimum 320 x 200, current 1440 x 900, maximum 2960 x 1024
VGA connected (normal left inverted right x axis y axis)
Identifier: 0x3b
Timestamp: 1278799
Subpixel: unknown
Clones:
CRTCs: 0 1
1360x768 (0x41) 84.8MHz -HSync +VSync
h: width 1360 start 1432 end 1568 total 1776 skew 0 clock 47.7KHz
v: height 768 start 771 end 781 total 798 clock 59.8Hz
1152x864 (0x48) 81.6MHz -HSync +VSync
h: width 1152 start 1216 end 1336 total 1520 skew 0 clock 53.7KHz
v: height 864 start 865 end 868 total 895 clock 60.0Hz
1024x768 (0x4c) 65.0MHz -HSync -VSync
h: width 1024 start 1048 end 1184 total 1344 skew 0 clock 48.4KHz
v: height 768 start 771 end 777 total 806 clock 60.0Hz
800x600 (0x51) 40.0MHz +HSync +VSync
h: width 800 start 840 end 968 total 1056 skew 0 clock 37.9KHz
v: height 600 start 601 end 605 total 628 clock 60.3Hz
640x480 (0x56) 25.2MHz -HSync -VSync
h: width 640 start 656 end 752 total 800 skew 0 clock 31.5KHz
v: height 480 start 490 end 492 total 525 clock 59.9Hz
1440x900 (0x3f) 101.6MHz
h: width 1440 start 1488 end 1520 total 1824 skew 0 clock 55.7KHz
v: height 900 start 903 end 909 total 926 clock 60.2Hz
LVDS connected 1440x900+0+0 (0x3f) normal (normal left inverted right x axis y axis) 0mm x 0mm
Identifier: 0x3c
Timestamp: 1278799
Subpixel: horizontal rgb
Clones:
CRTC: 1
CRTCs: 1
PANEL_FITTING: full
supported: center full_aspect full
BACKLIGHT_CONTROL: kernel
supported: native legacy combination kernel
BACKLIGHT: 15 (0x0000000f) range: (0,15)
1440x900 (0x3f) 101.6MHz *current +preferred
h: width 1440 start 1488 end 1520 total 1824 skew 0 clock 55.7KHz
v: height 900 start 903 end 909 total 926 clock 60.2Hz
1440x900 (0x40) 106.5MHz -HSync +VSync
h: width 1440 start 1520 end 1672 total 1904 skew 0 clock 55.9KHz
v: height 900 start 903 end 909 total 934 clock 59.9Hz
1360x768 (0x41) 84.8MHz -HSync +VSync
h: width 1360 start 1432 end 1568 total 1776 skew 0 clock 47.7KHz
v: height 768 start 771 end 781 total 798 clock 59.8Hz
1152x864 (0x42) 143.5MHz -HSync +VSync
h: width 1152 start 1232 end 1360 total 1568 skew 0 clock 91.5KHz
v: height 864 start 865 end 868 total 915 clock 100.0Hz
1152x864 (0x43) 121.5MHz +HSync -VSync
h: width 1152 start 1216 end 1344 total 1568 skew 0 clock 77.5KHz
v: height 864 start 865 end 868 total 911 clock 85.1Hz
1152x864 (0x44) 119.7MHz -HSync +VSync
h: width 1152 start 1224 end 1352 total 1552 skew 0 clock 77.1KHz
v: height 864 start 865 end 868 total 907 clock 85.0Hz
1152x864 (0x45) 108.0MHz +HSync +VSync
h: width 1152 start 1216 end 1344 total 1600 skew 0 clock 67.5KHz
v: height 864 start 865 end 868 total 900 clock 75.0Hz
1152x864 (0x46) 105.0MHz -HSync +VSync
h: width 1152 start 1224 end 1352 total 1552 skew 0 clock 67.6KHz
v: height 864 start 865 end 868 total 902 clock 75.0Hz
1152x864 (0x47) 96.8MHz -HSync +VSync
h: width 1152 start 1224 end 1344 total 1536 skew 0 clock 63.0KHz
v: height 864 start 865 end 868 total 900 clock 70.0Hz
1152x864 (0x48) 81.6MHz -HSync +VSync
h: width 1152 start 1216 end 1336 total 1520 skew 0 clock 53.7KHz
v: height 864 start 865 end 868 total 895 clock 60.0Hz
1024x768 (0x49) 94.5MHz +HSync +VSync
h: width 1024 start 1072 end 1168 total 1376 skew 0 clock 68.7KHz
v: height 768 start 769 end 772 total 808 clock 85.0Hz
1024x768 (0x4a) 78.8MHz +HSync +VSync
h: width 1024 start 1040 end 1136 total 1312 skew 0 clock 60.0KHz
v: height 768 start 769 end 772 total 800 clock 75.0Hz
1024x768 (0x4b) 75.0MHz -HSync -VSync
h: width 1024 start 1048 end 1184 total 1328 skew 0 clock 56.5KHz
v: height 768 start 771 end 777 total 806 clock 70.1Hz
1024x768 (0x4c) 65.0MHz -HSync -VSync
h: width 1024 start 1048 end 1184 total 1344 skew 0 clock 48.4KHz
v: height 768 start 771 end 777 total 806 clock 60.0Hz
832x624 (0x4d) 57.3MHz -HSync -VSync
h: width 832 start 864 end 928 total 1152 skew 0 clock 49.7KHz
v: height 624 start 625 end 628 total 667 clock 74.6Hz
800x600 (0x4e) 56.3MHz +HSync +VSync
h: width 800 start 832 end 896 total 1048 skew 0 clock 53.7KHz
v: height 600 start 601 end 604 total 631 clock 85.1Hz
800x600 (0x4f) 50.0MHz +HSync +VSync
h: width 800 start 856 end 976 total 1040 skew 0 clock 48.1KHz
v: height 600 start 637 end 643 total 666 clock 72.2Hz
800x600 (0x50) 49.5MHz +HSync +VSync
h: width 800 start 816 end 896 total 1056 skew 0 clock 46.9KHz
v: height 600 start 601 end 604 total 625 clock 75.0Hz
800x600 (0x51) 40.0MHz +HSync +VSync
h: width 800 start 840 end 968 total 1056 skew 0 clock 37.9KHz
v: height 600 start 601 end 605 total 628 clock 60.3Hz
800x600 (0x52) 36.0MHz +HSync +VSync
h: width 800 start 824 end 896 total 1024 skew 0 clock 35.2KHz
v: height 600 start 601 end 603 total 625 clock 56.2Hz
640x480 (0x53) 36.0MHz -HSync -VSync
h: width 640 start 696 end 752 total 832 skew 0 clock 43.3KHz
v: height 480 start 481 end 484 total 509 clock 85.0Hz
640x480 (0x54) 31.5MHz -HSync -VSync
h: width 640 start 664 end 704 total 832 skew 0 clock 37.9KHz
v: height 480 start 489 end 492 total 520 clock 72.8Hz
640x480 (0x55) 31.5MHz -HSync -VSync
h: width 640 start 656 end 720 total 840 skew 0 clock 37.5KHz
v: height 480 start 481 end 484 total 500 clock 75.0Hz
640x480 (0x56) 25.2MHz -HSync -VSync
h: width 640 start 656 end 752 total 800 skew 0 clock 31.5KHz
v: height 480 start 490 end 492 total 525 clock 59.9Hz
720x400 (0x57) 35.5MHz -HSync +VSync
h: width 720 start 756 end 828 total 936 skew 0 clock 37.9KHz
v: height 400 start 401 end 404 total 446 clock 85.0Hz
640x400 (0x58) 31.5MHz -HSync +VSync
h: width 640 start 672 end 736 total 832 skew 0 clock 37.9KHz
v: height 400 start 401 end 404 total 445 clock 85.1Hz
640x350 (0x59) 31.5MHz +HSync -VSync
h: width 640 start 672 end 736 total 832 skew 0 clock 37.9KHz
v: height 350 start 382 end 385 total 445 clock 85.1Hz
HDMI-1 connected 1360x768+0+0 (0x41) normal (normal left inverted right x axis y axis) 0mm x 0mm
Identifier: 0x3d
Timestamp: 1278799
Subpixel: unknown
Clones: HDMI-2
CRTC: 0
CRTCs: 0 1
1360x768 (0x41) 84.8MHz -HSync +VSync *current
h: width 1360 start 1432 end 1568 total 1776 skew 0 clock 47.7KHz
v: height 768 start 771 end 781 total 798 clock 59.8Hz
1152x864 (0x48) 81.6MHz -HSync +VSync
h: width 1152 start 1216 end 1336 total 1520 skew 0 clock 53.7KHz
v: height 864 start 865 end 868 total 895 clock 60.0Hz
1024x768 (0x4c) 65.0MHz -HSync -VSync
h: width 1024 start 1048 end 1184 total 1344 skew 0 clock 48.4KHz
v: height 768 start 771 end 777 total 806 clock 60.0Hz
800x600 (0x51) 40.0MHz +HSync +VSync
h: width 800 start 840 end 968 total 1056 skew 0 clock 37.9KHz
v: height 600 start 601 end 605 total 628 clock 60.3Hz
640x480 (0x56) 25.2MHz -HSync -VSync
h: width 640 start 656 end 752 total 800 skew 0 clock 31.5KHz
v: height 480 start 490 end 492 total 525 clock 59.9Hz
HDMI-2 disconnected (normal left inverted right x axis y axis)
Identifier: 0x3e
Timestamp: 1278799
Subpixel: unknown
Clones: HDMI-1
CRTCs: 0 1
xorg.conf is here
Section "ServerFlags"
Option "AutoAddDevices" "false"
EndSection
Section "ServerLayout"
Identifier "X.org Configured"
Screen 0 "Screen0" 0 0
InputDevice "Mouse0" "CorePointer"
InputDevice "Keyboard0" "CoreKeyboard"
InputDevice "Touchpad" "SendCoreEvents"
Option "AIGLX" "true"
EndSection
Section "Files"
# RgbPath "/usr/share/X11/rgb"
ModulePath "/usr/lib/xorg/modules"
FontPath "/usr/share/fonts/misc"
FontPath "/usr/share/fonts/100dpi:unscaled"
FontPath "/usr/share/fonts/75dpi:unscaled"
FontPath "/usr/share/fonts/TTF"
FontPath "/usr/share/fonts/Type1"
EndSection
Section "Module"
Load "GLcore"
Load "xtrap"
Load "extmod"
Load "glx"
Load "dri"
# Load "record"
Load "dbe"
Load "freetype"
Load "synaptics"
EndSection
Section "InputDevice"
Identifier "Keyboard0"
Driver "kbd"
Option "XkbRules" "xorg"
Option "XkbModel" "thinkpad60"
Option "XkbLayout" "us"
EndSection
Section "InputDevice"
Identifier "Mouse0"
Driver "mouse"
Option "Protocol" "auto"
Option "Device" "/dev/input/mice"
Option "ZAxisMapping" "4 5 6 7"
EndSection
Section "InputDevice"
Identifier "Touchpad"
Driver "synaptics"
Option "SendCoreEvents" "true"
Option "VertEdgeScroll" "true"
Option "HorizEdgeScroll" "true"
Option "Device" "/dev/psaux" #/dev/input/mouse0
Option "Protocol" "auto-dev"
# Option "TouchpadOff" "1" #Uncomment if you just want to disable the touchpad and use only the trackpoint
# Option "HorizScrollDelta" "0" #Why is this in here by default. By Gods, it kill horizontal scrolling!
Option "RightEdge" "5500" #This is a little bigger than the default narrowing the scroll region
Option "BottomEdge" "4500" #This is a little bigger than the default narrowing the scroll region
Option "RTCornerButton" "0" #disable Right Top corner "button"
Option "RBCornerButton" "0" #disable Right Bottom corner "button"
Option "SHMConfig" "on" #this allows configuration of the touchpad using qsynaptics, synclient, or what have you.
EndSection
Section "Monitor"
DisplaySize 304.8 190.5 # 120 dpi @1440x900
Identifier "Monitor0"
Option "DPMS"
EndSection
Section "Device"
Option "NoDDC" "true" # [<bool>]
Identifier "Card0"
Driver "intel"
VendorName "Intel Corporation"
BoardName "Mobile Integrated Graphics Controller"
BusID "PCI:0:2:0"
Option "AccelMethod" "xaa"
Option "XAANoOffscreenPixmaps" "true"
Option "DRI" "true"
Option "FramebufferCompression" "false"
EndSection
Section "Screen"
Identifier "Screen0"
Device "Card0"
Monitor "Monitor0"
SubSection "Display"
Viewport 0 0
Depth 24
Modes "1440x900" "1280x800" "1024x768" "800x600"
Virtual 2960 1024
EndSubSection
EndSection
Section "DRI"
Group "video"
Mode 0666
EndSection
Section "Extensions"
Option "Composite" "Enable"
EndSection
and now i am using awesome wm. any ideas? Thank you!!

konni wrote:
how many monitors do you want to plugin? three? like damjan said, not sure if that works at all.
or are the hdmi outputs idle and you're just trying to plug in a second screen?
whats the exact problem? no output on that screen at all? or mirroring the internal one? in that case, try
xrandr --output VGA --right-of LVDS
(or left-of...)
can you plug that monitor in with hdmi? (adapter/etc) you might try that as well, maybe just the vga fails.
wow.. thank you konni... and thank damjan
i turned off HDMI-1, then I could get VGA work!
now i have dual screens, pretty cool.

Similar Messages

I want to create org data profile in service scenario, with price determination from sales org, distribution centre , can any one help me with these

i want to create org data profile in service scenario, with price determination from sales org, distribution centre , can any one help me with these
IF I CREATE SERVICE ORG WITH SERVICE SCENARIO ORG DATA PROFILE,
MY PRICING IS NOT GETTING DETERMINED AS IT IS LINKED TO SALES ORG AND DISTRIBUTION CHANNEL THROUGH PRICING DETERMINATION SO HOW TO DO THE CUSTOMIZATION FOR THIS SITUATION
WITH REGARDS,
SATHISH

Hi Satish,
Please assign the org det. rules to org det. profile with Sales and Service scenarios and then assign the org. det. profile to transaction type. The below screenshot is just for your reference.
Hope it would fix your issue.
Regards,

I am restoreing my iphone 3g and on the instaling frameware i keep getting a code 1604 can any one help me with what i am ment to do when i get this error

as title can any one help me thank you

Error 1604
This error is often related to USB timing. Try changing USB ports, using a different dock connector to USB cable, and other available USB troubleshooting steps (troubleshooting USB connections. If you are using a dock, bypass it and connect directly to the white Apple USB dock connector cable. If the issue persists on a known-good computer, the device may need service.
If the issue is not resolved by USB isolation troubleshooting, and another computer is not available, try these steps to resolve the issue:
Connect the device to iTunes, confirm that the device is in Recovery Mode. If it's not in Recovery Mode, put it into Recovery Mode.
Restore and wait for the error.
When prompted, click OK.
Close and reopen iTunes while the device remains connected.
The device should now be recognized in Recovery Mode again.
Try to restore again.
If the steps above do not resolve the issue, try restoring using a known-good USB cable, computer, and network connection.

I can no longer see FaceBook notifications in my notification area on my desk top. Can any one help me with this?

I can no longer see any Notifications from my FaceBook account in the notifications area on my Mac. I have it in the Notifications Area and it is still not providing me my notifications. Any suggestions?

Hi Tammy56,
Welcome to the Support Communities!
The article below may be able to help you with this.
Click on the link to see more details and screenshots.
iCloud: Troubleshooting iCloud Calendar
http://support.apple.com/kb/TS3999?viewlocale=en_US
Cheers,
- Judy

HT204302 i get a message when I plug in my ipod to my laptop saying "cannot use this ipod because apple mobile device is not started" can any one help me with this...I have never had this happen before

Hello anyone
I get a message when i plug in my ipod touch saying "cannot use this ipod because apple mobile service is not started" can anyone please help me with this problem...I had this message once before but I forgot how to correct it

From the More Like This section on the right:
I get error message when I plug in iPhone 4s saying "This iPhone cannot be used because the Apple Mobile Device service is not started"
can't get my ipod to connect to tunes error message "cannot be used because the apple mobile device service is not started" fixes? Using Win XP
im trying to connect my ipod to itunes and its saying it cannot connect because the "Apple Mobile Device is not started" help
Or see: iPhone, iPad, iPod touch: How to restart the Apple Mobile Device Service (AMDS) on Windows

Can any one help me with unlocking my iphone4 or do i have to take it aND HAVE DONE , I THOUGHT THAT WHAT THIS SITE WAS TO HELP PPL LIKE ME , LOL

DOES ANY ONE KNOW HOW TO UNLOCK AN APPLE IPHONE 4 ???

Sure, you need to contact your cellular provider to determine if they provide unlocking and if you qualify.

Can any one help me with CD/Audio disc playback problem on media center m8200n running Windows Vista

I have HP Media Center m8200n Dest top running WINDOWS VISTA HOME PREMIUM 32 BIT edition.It has MEDIA CENTER and MEDIA PLAYER. I experience problems with the computer being able to play CD music discs. What happens is that the Disc will play only for 63 seconds exactly and then stop playing the track, the player will then skip tracks, settle on another one, play it for a few moments and then skip to the end and then play nothing. It gives me an error message that it cannot read the disc. This happens with any and every standard store bought CD new or used. These CDs also do play on my laptop running basically same operating system. This happens whether I trying to Play a disc or burn the disc to the hard drive. The drives work great though as they do play DATA discs all the way through. MP3 discs play fine. It also plays the DVD movies with no problem. Windows media player doesn't make it work, also installed VLC player and REALPLAYER to try some other players and they also don't work for music, only DVDs. They all only produce 63 seconds of music play back from a disc. I've already tried Changing ENHANCEMENTS, UPDATING DRIVERS, UNINSTALLING THE DISC DRIVE and then re-installing back into WINDOWS but none of that helped. SYSTEM came with the integrated REALTEK HIGH DEFINITION AUDIO on the mother boad for multi channel playback options and I've downloaded those updated drivers again but that doesn't do anything. Thinking it might be a hardware drive problem I purchased a new LG BLU-RAY DRIVE/BURNER super multi drive which plays fantastic for any video format from Blu-Ray to regular DVD format with the Power DVD software but the machine is causing even this new drive to have the same problem with the audio and it cuts out playing the audio disc within the same 63 seconds running audio disc. . There seems to be a software glitch and I'm wondering if you can help. Also the sound card seems to work perfectly fine. I downloaded I-Tunes and copied over audio files to the computer via my flash drive and when I play those files from the hard drive, or even the sample windows media files which reside on the hard drive in MY MUSIC, all files play through perfectly, fully, and with great sound. Audio out jacks in back of computer work fine as also does the front head phone jacks upfront. Something in the software when playing a audio disc/file through the dic drives???? I've got hundreds of CD and it's a bummer not beng able to lay them through the system. Does anyone think moving from VISTA PREMIUM to a upgraded version like ULTIMATE or even going up to Windows 7 might solve problem??? What about the 32 bit verses 64 bit editions??? My system should be able to run in the 64 bit frame work also. THANK YOU in advance!!!

Hi,
All dimms work individually? Did you run a bootable memory diagnostic to determine the reliability? Did you run a diagnostic on the hard drive? I believe that your PC came with PC Doctor and that you can create a bootable diagnostic disk. Did you create that disk? Be sure to purchase memory dimms from a manufacturer that will stand behind their product with a guarantee such as Crucial, Corsair or Kingston. Buy directly from the manufacturer and they will stand behind the guarantee. Be sure that all of the dimms are identical. Use CPU-Z to determine that the specifications are indeed identical.
You have some options to consider once you can stablize your PC for updating the BIOS.
Locate a hard drive and use the HP external recovery media to build a VISTA system. -- safest method
Use a VISTA repair disk and at the command prompt try executing the HP BIOS update (Admin). -- safe
Try a bootable BIOS update process as suggested at this site. -- less safe but doable
HP DV9700, t9300, Nvidia 8600, 4GB, Crucial C300 128GB SSD
HP Photosmart Premium C309G, HP Photosmart 6520
HP Touchpad, HP Chromebook 11
Custom i7-4770k,Z-87, 8GB, Vertex 3 SSD, Samsung EVO SSD, Corsair HX650,GTX 760
Custom i7-4790k,Z-97, 16GB, Vertex 3 SSD, Plextor M.2 SSD, Samsung EVO SSD, Corsair HX650, GTX 660TI
Windows 7/8 UEFI/Legacy mode, MBR/GPT

Can any one help me with SAP product version information,

1) NW04. Which has two subsequent versions:
SAP Netweaver 2004
SAP Netweaver 2004S (Alias SAP Netweaver 7.0), for which one enhancement
pack exists:
- EHP1
2) NW05. Which has one version:
SAP Netweaver 2005 (Contains ECC 6.0 / ERP 6.0), for which four
enhancement packs exists:
- EHP1
- EHP2
- EHP3
- EHP4 (Available from 21.11.2008). EHP4 seems to exist in two flavors,
"Easy adaptation", and "Continues Innovation"
3) NW06 (Alias SAP Netweaver 7.1, currently in rampup phase)
4) SAP Netweaver 7.2 (Available in 2009)
First question:
The Netweaver Developer Studio (NWDS) seems to exist in two versions:
- NWDS 7.0
- NWDS 7.1 (As part of the Composit Environment / CE) Which SAP
Netweaver release(s) support the above NWDS versions?
Second question:
Has anything changed in the graphical capabilities (such as the
availability of GUI controls, office integration, etc) between both NWDS
versions? If so, what are the major changes?
Third question:
The CE environment contains development tools for SOA development.
Is it possible to use NWDS from the CE environment, without requirering
end-users to install the CE environment on their system?
Fourth question:
Are there any differences in the graphical capabilities between NWDS
Java and WebDynpro for Java.
If so, which?
Are there any differences in the integration capabitlities (i.e. ABAP
dictionary info, help texts, search helps, messaging, etc) between
WebDynpro for Java and WebDynpro for ABAP?
If so, which?

Have you got any answer for these questions
Nikhil

Can any one help me with this chat server

The code below is of a client and server but the problem is that the msg can be sent only from the server and not the client I want that whenever a msg is sent from the server the control for writing the msg should go on to the client n den vise versa n should continue till the connection is terminated..plz help me....!
CoDES
for client
import java.io.BufferedReader;
import java.io.IOException;
import java.io.InputStreamReader;
import java.net.InetAddress;
import java.net.Socket;
import java.net.UnknownHostException;
class client {
public static void main(String[] args) throws IOException {
Socket s =null;
BufferedReader b=null;
try{
s=new Socket( InetAddress.getLocalHost(),98);
b=new BufferedReader(new InputStreamReader(s.getInputStream()));
catch(UnknownHostException u) {
System.err.println("i dont know host");
System.exit(0);
String inp;
while((inp=b.readLine())!=null){
System.out.println(inp);
b.close();
s.close();
FOR SERVER$
import java.io.BufferedReader;
import java.io.IOException;
import java.io.InputStreamReader;
import java.io.PrintWriter;
import java.net.ServerSocket;
import java.net.Socket;
import java.nio.channels.ServerSocketChannel;
public class server {
public static void main(String[] args) throws IOException {
ServerSocket s1=null;
try{
s1=new ServerSocket(98);
}catch(IOException u1)
System.err.println("could not find port 98");
System.exit(1);
Socket c=null;
try{
c=s1.accept();
System.out.println("connection from"+c);
catch(IOException e)
System.out.println("accept failed");
System.exit(1);
PrintWriter out=new PrintWriter(c.getOutputStream(),true);
BufferedReader in=new BufferedReader(new InputStreamReader(c.getInputStream()));
String I;
BufferedReader sin=new BufferedReader(new InputStreamReader(System.in));
System.out.println("i am ready to type now");
while((I=sin.readLine())!=null) {
out.println(I);
out.close();
sin.close();
c.close();
s1.close();
}

What you need is to have two loops running at the same time. One for receiving messages and other for waiting user input. This can be done by using separate threads.
For example after client has made connection to server, start a new thread that runs loop for receiving messages from the socket and printing them to System.out. Then in the default thread start loop for reading users input. The server could have similar structure.
So, what I think you are looking for are threads.

Can any one help me with installation of 4.6c on win2000 server.

Hi ,
Can any 1 please send me the installation giude for SAP 4,6c on win2000 server. My mail addres : [email protected]
Thanks
Jahan

What you need is to have two loops running at the same time. One for receiving messages and other for waiting user input. This can be done by using separate threads.
For example after client has made connection to server, start a new thread that runs loop for receiving messages from the socket and printing them to System.out. Then in the default thread start loop for reading users input. The server could have similar structure.
So, what I think you are looking for are threads.

Any one help me with Links please!

For my links to work I have to click it twice.
For some reason when I move my cursor over my web page
a box appears around the whole page and my cursor turns into
a
hand indicating that the whole page is a link.
Can anyone help me.
Thanks.

That question comes up daily on these forums. It has to do
with Active Content and Internet Explorer.
Here's a page that will give you everything you need to deal
with this little annoyance:
http://www.adobe.com/devnet/activecontent/

Can any one help me with these eroors

Hi
i have following errors while installing Oracle 8.1.6 on Redhat 7.1
All the errors are with linking and ivoking following make files
1. ins_net_client.mk
2. ins_ldap.mk
3. ins_net_server.mk
4. ins_oemagent.mk
5. ins_odg.mk
6. ins_otrace.mk
7. ins_plsql.mk
8. ins_rdbms.mk
I am having the all compatible packages installed and i do have jdk1.1.8 installed and link also has been made.
Thanking in anticipation
Pravin

Hi Satish,
Please assign the org det. rules to org det. profile with Sales and Service scenarios and then assign the org. det. profile to transaction type. The below screenshot is just for your reference.
Hope it would fix your issue.
Regards,

Any one help me with this problem

i have download nvidia driver v175.16 (msi-version) to my card msi FX5200-TD128LF
when i install the driver windows tell me that nvidia geforce fx5200 has not passed windows logo test which my driver is (Not digitally signed)
and some games not run like prince of persia
note:i work on windows xp xp3

Quote from: mahmed_fouad on 02-March-09, 10:50:38
and where is nvidia driver 175.19 (msi version) for msi vga cards
NVIDIA >> 175.19 << WHQL-certified driver for GeForce 6, 7, 8, and 9 series GPUs.
MSI doesn't show any 175.19 for any of their vid cards, closest is 175.16 (2008-07-21) and then only for 7xxx & 8xxx series.

My itunes is not detecting my ipad air can any one help me plz

ever since i updated my itunes its not rdetecting my ipad can any one help me with this problem plz

Hello prachandkhanal,
Thanks for using Apple Support Communities.
If it does not appear under Devices in iTunes after you connect it to your PC try this article.
iOS: Device not recognized in iTunes for Windows
http://support.apple.com/kb/ts1538
Have a nice day,
Mario

HT1338 When I connect my Macbook Pro to my Dell DLP projector, either via cable or wirelessly, I just see a dark screen with the mouse and mouse trails only, can any one help?

When I connect my Macbook Pro to my Dell DLP projector, either via cable or wirelessly, I just see a dark screen with the mouse and mouse trails only, can any one help?

jpmarkques post is a good start point, after folling his directions, you can try detect displays. Also try different rsolution and refresh rates.
Most of the projectors I have used support a 1024X768 res.
Youcan also try a pram reset if it still does not detect.
Leave theproctor connected and powered up, power down the MBP.
Power back up the MBP and hold the following keys before you hear the start up chime:
Option, command, P,R (no commas) continue to hold these keys till you hear the start up chime 2 times.

Any one help me with dual screen?

Similar Messages

Maybe you are looking for