Any performance benchmarks Jserv and OC4J

Are any performance benchmarks available for OC4J and Jserv?
Satish

I had the Seagate 100 GB, 7200 rpm drive in my previous MacBook Pro Core Duo. But when I upgraded to a new MacBook Pro Core 2 Duo recently, I opted for the 160 GB, 5400 rpm drive (I got an Hitachi) because I also found the older 100 GB drive to be a bit small for my needs.
I was concerned about performance at first too, but after I got the new machine and used it for a while, I realized that the real world performance difference between the 5400 and 7200 drive was negligible at best (at least for the things I do, which includes some video editing, music production, software development, and games). In fact, I really couldn't tell the difference between the drives. And tests done by Bare Feats actually show that the 5400 rpm drive outperforms the 7200 rpm drive when you have 74 GB of data or more. (http://barefeats.com/mbcd7.html)
So if you need the extra storage capacity, you can't go wrong with the new 160 GB, 5400 rpm drive. I highly recommend it.
I hope this helps!

Similar Messages

  • (268625273) Q WSI-29 Can you give any performance benchmarks for WLS web services?

    Q<WSI-29> Can you give any performance benchmarks for WLS web services?
    A<WSI-29>: It is very difficult to quantify performance aspects of web services
    since they depend on so many variables including but not limited to: backend system
    processing by stateless session beans and message driven beans, size of XML SOAP
    message sent, system hardware (CPU speed, parallel processing, RAM speed) and
    system software (JVM type and version of WebLogic server). However, let me point
    out that the EJB backend processing of requests both have the best possible scalability
    within the EJB2.0 specification (both stateless session and message driven beans
    can be pooled) and servlets have a proven scalable track record. Thus it should
    be possible to scale your web service deployment to meet demand. The overhead
    in processing XML within the servlet can be significant depending on the size
    of XML data (either as a parameter or a return type). While WLS6.1 does not have
    any features to address this performance concern, WLS7.0 will feature Serializer
    and Deserializer classes which can be dedicated to the XML to Java and Java to
    XML translation (they can also be automatically be generated from a DTD, XML Schema
    or regular JavaBean).
    It is true that web services are not the fastest way to process client requests
    but BEA is committed to making WebLogic server the fastest possible service provider.
    Adam

    see http://www.oracle.com/support/products/oas/sparc30/html/ows08811.html

  • Are there any performance benchmark tools for Flash?

    I am looking to benchmark Flash on various computers that I use.  I was surprised that the performance of Adobe Flash on my Intel i5 computer running Windows 7 Pro 64-bit OS and IE 10 was MUCH WORSE than running on a Windows 7 Pro 32-bit on an Intel i3 computer running the same browser. 
    I have tried running both 32-bit IE and 64-bit IE and get the same general bad performance on the 64-bit Windows OS. I would like to find a tool to benchmark these various computers so that I can establish baseline performance while I explore finding a fix Adobe Flash on a 64-bit OS.
    Can someone suggest some tools for Flash performance benchmarking? Thank you.

    The best advise we can really give you is that both companies offer free trials and you should download them both and see which works best for you.  I own Parallels Desktop v6, and VMWare Fusion v3.  For me, VMWare s better for some things, but Parallels is better for most.  Depending on what you do and how you use your applications your milage may vary.
    One other note to keep in mind.  Since Apple is looking to release a new OS version in the very near future, you might want to hold-off a bit on our vitualization choice just yet.  I would exect that both companies will be working on a new release for support/compatibilty of the new MacOS, so you might want to wait to see if there are any other changes that make you want to lean towards one or the other...

  • Do Oracle Forms give any performance uplift  on Weblogic compared to OC4J?

    Hi ,
    Forms can now run on WebLogic JVM instead of Application Server’s OC4J.
    1. Is there any presentation/document on this?
    2. does it give any performance uplift compared to OC4J?
    Regards,
    Noman

    The details of the changes and how WLS is set up to use Forms is available as part of the 11g documentaion available from otn.oracle.com/products/forms
    Regarding perfomance, we've not done any specific testing and to be honest I wouldn't be expecting any great changes since Forms is only uses WLS as a small element in the complete Forms lifecycle (since Forms is running as a C process so not in a Java container).
    Performance issues/improvements are more likely to be found in some well known tips of tuning the applications.
    Regards
    Grant

  • Performance benchmarks Win XP

    Does anyone know if there are any performance benchmarks available for Windows XP (via Boot Camp) running on various different Mac Pro, MacBook Pro, and iMac machines?
    I assume the more RAM, the greater BUS speed, the faster and more numerous the processors the better performance but I was looking for objective numbers to help me decide what system to buy.. I know that one of the PC site rated Windows on a Mac laptop very fast.

    Well, I don't know that anyone has run such benchmarks, but it's logical to assume that the faster the machine the faster XP will run on a Boot Camp installation since Windows is running natively on the hardware as though it were a normal PC. What's important to you - speed or mobility? If speed then get a Mac Pro. If mobility then get a MacBook Pro.

  • Performance benchmarks?

    Hello,
    Has anyone done any performance benchmarking on Portal Server? (Or know
    where I can find such information?)
    I'm curious to know:
    1. Given iPlanet's recommended hardware, how many concurrent users does
    this support with decent performance (SSL to gateway to non-SSL server)?
    2. How does the product scale...e.g. if I wanted to have 250 concurrent
    gateway users (running SSL), what hardware is recommended? 500 users?
    1000 users?
    3. Has anyone tried (or does the product even support) the use of SSL
    accelerator cards on the gateway machine?
    Any help is appreciated.
    Thanks,
    Murray

    Hi.
    We did some benchmarking in january, at the SUN iforce center in holland,
    using iPlanet Portal Server SP2 Hotpatch3.
    We focused on measuring:
    1) Average time to log in to portal(with default channels, netlet set up) as
    a function of simultaneous users
    2) Average time to do a "standard operation" inside portal.
    Our results supported the numbers from iPlanet saying thath one could have
    250 simultaneous "secure" users pr CPU in this setup. (SP2 HP3)
    This "guaranteed" number of simultaneous users pr CPU for iPS 3 SP3 is said
    to be increased to 1500.
    We used SUN E 220 s with 2x450 MHZ CPUs and 1 G RAM.
    The performance increased remarkable when we went from gateway and server on
    1 machine, to separate gateway and server.
    Tore
    "Murray Bodor" <[email protected]> wrote in message
    news:[email protected]..
    Hello,
    Has anyone done any performance benchmarking on Portal Server? (Or know
    where I can find such information?)
    I'm curious to know:
    1. Given iPlanet's recommended hardware, how many concurrent users does
    this support with decent performance (SSL to gateway to non-SSL server)?
    2. How does the product scale...e.g. if I wanted to have 250 concurrent
    gateway users (running SSL), what hardware is recommended? 500 users?
    1000 users?
    3. Has anyone tried (or does the product even support) the use of SSL
    accelerator cards on the gateway machine?
    Any help is appreciated.
    Thanks,
    Murray

  • Geoserver and OC4J

    i have tried to deploy geoserver.war to oracle OC4J. after sucessful :) deployment when i tried to run geoserver's administration toll i have received exception javax.servlet.UnavailableException
    does anybody have any expirience with geoserver and OC4J
    tnx,
    sp

    You can find the application log files via OracleAS EM (on my local machine the address to this is http://localhost:8888/em/console/ias/logging/logfiles). Once there you can dig into the log tree...
    Components
    -Enterprise Manager
    -OC4J
    -home
    -Application ascontrol
    -Application default
    -Application geoserver
         -application.log
    Also, if you look at the start/stop commands for the Apache-bundled version of GeoServer you will see that there are several classes that need to be included in the classpath for loading. Hence, when deploying to OC4J you would need to tell OC4J to include these as well (possibly also telling OC4J to override some Oracle libraries, such as XML parsers, where GeoServer uses a different library).
    -Justin

  • Poor performance by Matlab and Windows benchmark tests

    Hello
    I have a Lenovo Thinkpad W520 with Windows 7 64bit installed. Compared to other Notebooks with comparable hardware, my Lenovo is very slow. To prove my thought, I carried through a Matlab (64bit) benchmark test and the Windows 7 benchmark test. In both tests, my Lenovo was worse than the other notebooks. During the tests I set the Power Manager to performance and activated the Lenovo turbo boost.
    Now I want to ask, if there are any settings, perhaps in the bios, to speed the laptop up? Or why result such a bad performance although the hardware is very good?
    Thanks for your help
    Solved!
    Go to Solution.

    Thank you very much for your reply!
    I dated up the BIOS from version 1.27 to 1.32. Now the benchmark tests all look great!!
    Thanks

  • Cost and performance benchmarks for security

    Looking for cost and performance benchmarks on the
    Cryptograhic toolkit - 8i supplied package,
    Oracle Label Security (OLS)
    Virtual Private Database (VPD)
    Please send any suggestions to my email address - thanks

    Looking for cost and performance benchmarks on the
    Cryptograhic toolkit - 8i supplied package,
    Oracle Label Security (OLS)
    Virtual Private Database (VPD)
    Please send any suggestions to my email address - thanks

  • Running JSPs through Apache Jserv in OC4J

    hello there -
    I'm hoping someone can help me.
    I want index.jsp, our first page, to ACT like a JSP, rather than the current HTML. It seems that httpd.conf wont access OC4J, so i've attempted to access Jserv. Still, things wont work.
    If someone could please take a look at what i have so far in httpd.conf, more specifically, near the bottom where i've opened up Jserv, and let me know what i'm doing wrong, i'd greatly appreciate it!
    ## httpd.conf -- Apache HTTP server configuration file
    # Based upon the NCSA server configuration files originally by Rob McCool.
    # This is the main Apache server configuration file. It contains the
    # configuration directives that give the server its instructions.
    # See <URL:http://www.apache.org/docs/> for detailed information about
    # the directives.
    # Do NOT simply read the instructions in here without understanding
    # what they do. They're here only as hints or reminders. If you are unsure
    # consult the online docs. You have been warned.
    # After this file is processed, the server will look for and process
    # /devl/ics3/devl/apache/srm.conf and then /devl/ics3/devl/apache/access.conf
    # unless you have overridden these with ResourceConfig and/or
    # AccessConfig directives here.
    # The configuration directives are grouped into three basic sections:
    # 1. Directives that control the operation of the Apache server process as a
    # whole (the 'global environment').
    # 2. Directives that define the parameters of the 'main' or 'default' server,
    # which responds to requests that aren't handled by a virtual host.
    # These directives also provide default values for the settings
    # of all virtual hosts.
    # 3. Settings for virtual hosts, which allow Web requests to be sent to
    # different IP addresses or hostnames and have them handled by the
    # same Apache server process.
    # Configuration and logfile names: If the filenames you specify for many
    # of the server's control files begin with "/" (or "drive:/" for Win32), the
    # server will use that explicit path. If the filenames do not begin
    # with "/", the value of ServerRoot is prepended -- so "logs/foo.log"
    # with ServerRoot set to "/usr/local/apache" will be interpreted by the
    # server as "/usr/local/apache/logs/foo.log".
    ### Section 1: Global Environment
    # The directives in this section affect the overall operation of Apache,
    # such as the number of concurrent requests it can handle or where it
    # can find its configuration files.
    # ServerType is either inetd, or standalone. Inetd mode is only supported on
    # Unix platforms.
    ServerType standalone
    # ServerRoot: The top of the directory tree under which the server's
    # configuration, error, and log files are kept.
    # NOTE! If you intend to place this on an NFS (or otherwise network)
    # mounted filesystem then please read the LockFile documentation
    # (available at <URL:http://www.apache.org/docs/mod/core.html#lockfile>);
    # you will save yourself a lot of trouble.
    # Do NOT add a slash at the end of the directory path.
    ServerRoot "/oraapp/9iAS10220/home/Apache/Apache"
    # The LockFile directive sets the path to the lockfile used when Apache
    # is compiled with either USE_FCNTL_SERIALIZED_ACCEPT or
    # USE_FLOCK_SERIALIZED_ACCEPT. This directive should normally be left at
    # its default value. The main reason for changing it is if the logs
    # directory is NFS mounted, since the lockfile MUST BE STORED ON A LOCAL
    # DISK. The PID of the main server process is automatically appended to
    # the filename.
    #LockFile /devl/ics3/devl/apache/logs/httpd.lock
    # PidFile: The file in which the server should record its process
    # identification number when it starts.
    PidFile /devl/ics3/devl/apache/logs/httpd.pid
    # ScoreBoardFile: File used to store internal server process information.
    # Not all architectures require this. But if yours does (you'll know because
    # this file will be created when you run Apache) then you must ensure that
    # no two invocations of Apache share the same scoreboard file.
    ScoreBoardFile /devl/ics3/devl/apache/logs/httpd.scoreboard
    # In the standard configuration, the server will process httpd.conf (this
    # file, specified by the -f command line option), srm.conf, and access.conf
    # in that order. The latter two files are now distributed empty, as it is
    # recommended that all directives be kept in a single file for simplicity.
    # The commented-out values below are the built-in defaults. You can have the
    # server ignore these files altogether by using "/dev/null" (for Unix) or
    # "nul" (for Win32) for the arguments to the directives.
    #ResourceConfig conf/srm.conf
    #AccessConfig conf/access.conf
    # Timeout: The number of seconds before receives and sends time out.
    Timeout 300
    # KeepAlive: Whether or not to allow persistent connections (more than
    # one request per connection). Set to "Off" to deactivate.
    KeepAlive On
    # MaxKeepAliveRequests: The maximum number of requests to allow
    # during a persistent connection. Set to 0 to allow an unlimited amount.
    # We recommend you leave this number high, for maximum performance.
    MaxKeepAliveRequests 100
    # KeepAliveTimeout: Number of seconds to wait for the next request from the
    # same client on the same connection.
    KeepAliveTimeout 15
    # Server-pool size regulation. Rather than making you guess how many
    # server processes you need, Apache dynamically adapts to the load it
    # sees --- that is, it tries to maintain enough server processes to
    # handle the current load, plus a few spare servers to handle transient
    # load spikes (e.g., multiple simultaneous requests from a single
    # Netscape browser).
    # It does this by periodically checking how many servers are waiting
    # for a request. If there are fewer than MinSpareServers, it creates
    # a new spare. If there are more than MaxSpareServers, some of the
    # spares die off. The default values are probably OK for most sites.
    MinSpareServers 1
    MaxSpareServers 2
    # Number of servers to start initially --- should be a reasonable ballpark
    # figure.
    StartServers 1
    # Limit on total number of servers running, i.e., limit on the number
    # of clients who can simultaneously connect --- if this limit is ever
    # reached, clients will be LOCKED OUT, so it should NOT BE SET TOO LOW.
    # It is intended mainly as a brake to keep a runaway server from taking
    # the system with it as it spirals down...
    MaxClients 150
    # MaxRequestsPerChild: the number of requests each child process is
    # allowed to process before the child dies. The child will exit so
    # as to avoid problems after prolonged use when Apache (and maybe the
    # libraries it uses) leak memory or other resources. On most systems, this
    # isn't really needed, but a few (such as Solaris) do have notable leaks
    # in the libraries. For these platforms, set to something like 10000
    # or so; a setting of 0 means unlimited.
    # NOTE: This value does not include keepalive requests after the initial
    # request per connection. For example, if a child process handles
    # an initial request and 10 subsequent "keptalive" requests, it
    # would only count as 1 request towards this limit.
    MaxRequestsPerChild 0
    # Listen: Allows you to bind Apache to specific IP addresses and/or
    # ports, in addition to the default. See also the <VirtualHost>
    # directive.
    #Listen 3000
    #Listen 172.18.4.13:80
    # BindAddress: You can support virtual hosts with this option. This directive
    # is used to tell the server which IP address to listen to. It can either
    # contain "*", an IP address, or a fully qualified Internet domain name.
    # See also the <VirtualHost> and Listen directives.
    #BindAddress 172.18.4.13
    # Dynamic Shared Object (DSO) Support
    # To be able to use the functionality of a module which was built as a DSO you
    # have to place corresponding `LoadModule' lines at this location so the
    # directives contained in it are actually available before they are used.
    # Please read the file README.DSO in the Apache 1.3 distribution for more
    # details about the DSO mechanism and run `httpd -l' for the list of already
    # built-in (statically linked and thus always available) modules in your httpd
    # binary.
    # Note: The order in which modules are loaded is important. Don't change
    # the order below without expert advice.
    # Example:
    # LoadModule foo_module libexec/mod_foo.so
    LoadModule mmap_static_module libexec/mod_mmap_static.so
    LoadModule vhost_alias_module libexec/mod_vhost_alias.so
    LoadModule env_module libexec/mod_env.so
    LoadModule config_log_module libexec/mod_log_config.so
    LoadModule agent_log_module libexec/mod_log_agent.so
    LoadModule referer_log_module libexec/mod_log_referer.so
    LoadModule mime_magic_module libexec/mod_mime_magic.so
    LoadModule mime_module libexec/mod_mime.so
    LoadModule negotiation_module libexec/mod_negotiation.so
    LoadModule status_module libexec/mod_status.so
    LoadModule info_module libexec/mod_info.so
    LoadModule includes_module libexec/mod_include.so
    LoadModule autoindex_module libexec/mod_autoindex.so
    LoadModule dir_module libexec/mod_dir.so
    LoadModule cgi_module libexec/mod_cgi.so
    LoadModule asis_module libexec/mod_asis.so
    LoadModule imap_module libexec/mod_imap.so
    LoadModule action_module libexec/mod_actions.so
    LoadModule speling_module libexec/mod_speling.so
    LoadModule userdir_module libexec/mod_userdir.so
    LoadModule alias_module libexec/mod_alias.so
    LoadModule rewrite_module libexec/mod_rewrite.so
    LoadModule access_module libexec/mod_access.so
    LoadModule auth_module libexec/mod_auth.so
    LoadModule anon_auth_module libexec/mod_auth_anon.so
    LoadModule dbm_auth_module libexec/mod_auth_dbm.so
    LoadModule digest_module libexec/mod_digest.so
    LoadModule proxy_module libexec/libproxy.so
    LoadModule cern_meta_module libexec/mod_cern_meta.so
    LoadModule expires_module libexec/mod_expires.so
    LoadModule headers_module libexec/mod_headers.so
    LoadModule usertrack_module libexec/mod_usertrack.so
    LoadModule example_module libexec/mod_example.so
    LoadModule unique_id_module libexec/mod_unique_id.so
    LoadModule setenvif_module libexec/mod_setenvif.so
    LoadModule oprocmgr_module libexec/liboprocmgr.so
    LoadModule define_module libexec/mod_define.so
    LoadModule dms_module libexec/mod_dms.so
    LoadModule perl_module libexec/libperl.so
    LoadModule fastcgi_module libexec/mod_fastcgi.so
    <IfDefine SSL>
    LoadModule ssl_module libexec/mod_ssl.so
    </IfDefine>
    # ExtendedStatus controls whether Apache will generate "full" status
    # information (ExtendedStatus On) or just basic information (ExtendedStatus
    # Off) when the "server-status" handler is called. The default is Off.
    ExtendedStatus On
    ### Section 2: 'Main' server configuration
    # The directives in this section set up the values used by the 'main'
    # server, which responds to any requests that aren't handled by a
    # <VirtualHost> definition. These values also provide defaults for
    # any <VirtualHost> containers you may define later in the file.
    # All of these directives may appear inside <VirtualHost> containers,
    # in which case these default settings will be overridden for the
    # virtual host being defined.
    # If your ServerType directive (set earlier in the 'Global Environment'
    # section) is set to "inetd", the next few directives don't have any
    # effect since their settings are defined by the inetd configuration.
    # Skip ahead to the ServerAdmin directive.
    # Port: The port to which the standalone server listens. For
    # ports < 1023, you will need httpd to be run as root initially.
    #Port 7777
    #Listen 7777
    #Port 80
    #Listen 80
    ## SSL Support
    ## When we also provide SSL we have to listen to the
    ## standard HTTP port (see above) and to the HTTPS port
    <IfDefine SSL>
    # Port 80
    Listen 172.18.4.13:80
    Listen 172.18.4.13:443
    </IfDefine>
    # If you wish httpd to run as a different user or group, you must run
    # httpd as root initially and it will switch.
    # User/Group: The name (or #number) of the user/group to run httpd as.
    # . On SCO (ODT 3) use "User nouser" and "Group nogroup".
    # . On HPUX you may not be able to use shared memory as nobody, and the
    # suggested workaround is to create a user www and use that user.
    # NOTE that some kernels refuse to setgid(Group) or semctl(IPC_SET)
    # when the value of (unsigned)Group is above 60000;
    # don't use Group nobody on these systems!
    User ics3devl
    Group ics3devl
    # ServerAdmin: Your address, where problems with the server should be
    # e-mailed. This address appears on some server-generated pages, such
    # as error documents.
    ServerAdmin [email protected]
    # ServerName allows you to set a host name which is sent back to clients for
    # your server if it's different than the one the program would get (i.e., use
    # "www" instead of the host's real name).
    # Note: You cannot just invent host names and hope they work. The name you
    # define here must be a valid DNS name for your host. If you don't understand
    # this, ask your network administrator.
    # If your host doesn't have a registered DNS name, enter its IP address here.
    # You will have to access it by its address (e.g., http://123.45.67.89/)
    # anyway, and this will make redirections work in a sensible way.
    # 127.0.0.1 is the TCP/IP local loop-back address, often named localhost. Your
    # machine always knows itself by this address. If you use Apache strictly for
    # local testing and development, you may use 127.0.0.1 as the server name.
    ServerName 172.18.4.13
    # DocumentRoot: The directory out of which you will serve your
    # documents. By default, all requests are taken from this directory, but
    # symbolic links and aliases may be used to point to other locations.
    DocumentRoot "/devl/ics3/devl/webroot/apache"
    # Each directory to which Apache has access, can be configured with respect
    # to which services and features are allowed and/or disabled in that
    # directory (and its subdirectories).
    # First, we configure the "default" to be a very restrictive set of
    # permissions.
    <Directory />
    Options FollowSymLinks
    AllowOverride None
    </Directory>
    # Note that from this point forward you must specifically allow
    # particular features to be enabled - so if something's not working as
    # you might expect, make sure that you have specifically enabled it
    # below.
    # This should be changed to whatever you set DocumentRoot to.
    <Directory "/devl/ics3/devl/webroot/apache">
    # This may also be "None", "All", or any combination of "Indexes",
    # "Includes", "FollowSymLinks", "ExecCGI", or "MultiViews".
    # Note that "MultiViews" must be named explicitly --- "Options All"
    # doesn't give it to you.
    Options Indexes FollowSymLinks MultiViews
    # This controls which options the .htaccess files in directories can
    # override. Can also be "All", or any combination of "Options", "FileInfo",
    # "AuthConfig", and "Limit"
    AllowOverride None
    # Controls who can get stuff from this server.
    Order allow,deny
    Allow from all
    </Directory>
    # UserDir: The name of the directory which is appended onto a user's home
    # directory if a ~user request is received.
    <IfModule mod_userdir.c>
    UserDir public_html
    </IfModule>
    # Control access to UserDir directories. The following is an example
    # for a site where these directories are restricted to read-only.
    #<Directory /home/*/public_html>
    # AllowOverride FileInfo AuthConfig Limit
    # Options MultiViews Indexes SymLinksIfOwnerMatch IncludesNoExec
    # <Limit GET POST OPTIONS PROPFIND>
    # Order allow,deny
    # Allow from all
    # </Limit>
    # <LimitExcept GET POST OPTIONS PROPFIND>
    # Order deny,allow
    # Deny from all
    # </LimitExcept>
    #</Directory>
    # DirectoryIndex: Name of the file or files to use as a pre-written HTML
    # directory index. Separate multiple entries with spaces.
    <IfModule mod_dir.c>
    DirectoryIndex index.html index.jsp
    </IfModule>
    # AccessFileName: The name of the file to look for in each directory
    # for access control information.
    AccessFileName .htaccess
    # The following lines prevent .htaccess files from being viewed by
    # Web clients. Since .htaccess files often contain authorization
    # information, access is disallowed for security reasons. Comment
    # these lines out if you want Web visitors to see the contents of
    # .htaccess files. If you change the AccessFileName directive above,
    # be sure to make the corresponding changes here.
    # Also, folks tend to use names such as .htpasswd for password
    # files, so this will protect those as well.
    <Files ~ "^\.ht">
    Order allow,deny
    Deny from all
    </Files>
    # CacheNegotiatedDocs: By default, Apache sends "Pragma: no-cache" with each
    # document that was negotiated on the basis of content. This asks proxy
    # servers not to cache the document. Uncommenting the following line disables
    # this behavior, and proxies will be allowed to cache the documents.
    #CacheNegotiatedDocs
    # UseCanonicalName: (new for 1.3) With this setting turned on, whenever
    # Apache needs to construct a self-referencing URL (a URL that refers back
    # to the server the response is coming from) it will use ServerName and
    # Port to form a "canonical" name. With this setting off, Apache will
    # use the hostname:port that the client supplied, when possible. This
    # also affects SERVER_NAME and SERVER_PORT in CGI scripts.
    UseCanonicalName off
    # Add 2003/1/3 test for dynamic virtyal host
    # VirtualDocumentRoot /devl/ics3/moff/webroot/oc4j/ct/web/store/%1
    # TypesConfig describes where the mime.types file (or equivalent) is
    # to be found.
    <IfModule mod_mime.c>
    TypesConfig /devl/ics3/moff/apache/mime.types
    </IfModule>
    # DefaultType is the default MIME type the server will use for a document
    # if it cannot otherwise determine one, such as from filename extensions.
    # If your server contains mostly text or HTML documents, "text/plain" is
    # a good value. If most of your content is binary, such as applications
    # or images, you may want to use "application/octet-stream" instead to
    # keep browsers from trying to display binary files as though they are
    # text.
    DefaultType text/plain
    # The mod_mime_magic module allows the server to use various hints from the
    # contents of the file itself to determine its type. The MIMEMagicFile
    # directive tells the module where the hint definitions are located.
    # mod_mime_magic is not part of the default server (you have to add
    # it yourself with a LoadModule [see the DSO paragraph in the 'Global
    # Environment' section], or recompile the server and include mod_mime_magic
    # as part of the configuration), so it's enclosed in an <IfModule> container.
    # This means that the MIMEMagicFile directive will only be processed if the
    # module is part of the server.
    <IfModule mod_mime_magic.c>
    MIMEMagicFile /devl/ics3/devl/apache/magic
    </IfModule>
    # HostnameLookups: Log the names of clients or just their IP addresses
    # e.g., www.apache.org (on) or 204.62.129.132 (off).
    # The default is off because it'd be overall better for the net if people
    # had to knowingly turn this feature on, since enabling it means that
    # each client request will result in AT LEAST one lookup request to the
    # nameserver.
    HostnameLookups Off
    # ErrorLog: The location of the error log file.
    # If you do not specify an ErrorLog directive within a <VirtualHost>
    # container, error messages relating to that virtual host will be
    # logged here. If you do define an error logfile for a <VirtualHost>
    # container, that host's errors will be logged there and not here.
    ErrorLog /devl/ics3/devl/apache/logs/error_log
    # LogLevel: Control the number of messages logged to the error_log.
    # Possible values include: debug, info, notice, warn, error, crit,
    # alert, emerg.
    LogLevel warn
    # The following directives define some format nicknames for use with
    # a CustomLog directive (see below).
    LogFormat "%h %l %u %t \"%r\" %>s %b \"%{Referer}i\" \"%{User-Agent}i\"" combined
    LogFormat "%h %l %u %t \"%r\" %>s %b" common
    LogFormat "%{Referer}i -> %U" referer
    LogFormat "%{User-agent}i" agent
    # The location and format of the access logfile (Common Logfile Format).
    # If you do not define any access logfiles within a <VirtualHost>
    # container, they will be logged here. Contrariwise, if you do
    # define per-<VirtualHost> access logfiles, transactions will be
    # logged therein and not in this file.
    CustomLog /devl/ics3/devl/apache/logs/access_log common
    # If you would like to have agent and referer logfiles, uncomment the
    # following directives.
    #CustomLog /devl/ics3/devl/apache/logs/referer_log referer
    #CustomLog /devl/ics3/devl/apache/logs/agent_log agent
    # If you prefer a single logfile with access, agent, and referer information
    # (Combined Logfile Format) you can use the following directive.
    #CustomLog /devl/ics3/devl/apache/logs/access_log combined
    # Optionally add a line containing the server version and virtual host
    # name to server-generated pages (error documents, FTP directory listings,
    # mod_status and mod_info output etc., but not CGI generated documents).
    # Set to "EMail" to also include a mailto: link to the ServerAdmin.
    # Set to one of: On | Off | EMail
    ServerSignature On
    # Aliases: Add here as many aliases as you need (with no limit). The format is
    # Alias fakename realname
    <IfModule mod_alias.c>
    # Note that if you include a trailing / on fakename then the server will
    # require it to be present in the URL. So "/icons" isn't aliased in this
    # example, only "/icons/"..
    Alias /icons/ "/oraapp/9iAS10220/home/Apache/Apache/icons/"
    <Directory "/oraapp/9iAS10220/home/Apache/Apache/icons">
    Options Indexes MultiViews
    AllowOverride None
    Order allow,deny
    Allow from all
    </Directory>
    Alias /jservdocs/ "/oraapp/9iAS10220/home/Apache/Jserv/docs/"
    Alias /soapdocs/ "/oraapp/9iAS10220/home/soap/"
    Alias /perl/ "/oraapp/9iAS10220/home/Apache/Apache/cgi-bin/"
    Alias /images/ "/devl/ics3/devl/webroot/apache/images/"
    Alias /Fc/ "/devl/ics3/devl/webroot/apache/Fc/"
    Alias /html/ "/devl/ics3/devl/webroot/apache/html/"
    Alias /gftlist/ "/devl/ics3/devl/webroot/apache/gftlist/"
    Alias /articles/ "/devl/ics3/devl/webroot/apache/articles/"
    Alias /js/ "/devl/ics3/devl/webroot/apache/js/"
    Alias /css/ "/devl/ics3/devl/webroot/apache/css/"
    Alias /coremetrics/ "/devl/ics3/devl/webroot/apache/coremetrics/"
    # ScriptAlias: This controls which directories contain server scripts.
    # ScriptAliases are essentially the same as Aliases, except that
    # documents in the realname directory are treated as applications and
    # run by the server when requested rather than as documents sent to the client.
    # The same rules about trailing "/" apply to ScriptAlias directives as to
    # Alias.
    ScriptAlias /cgi-bin/ "/devl/ics3/devl/webroot/apache/cgi-bin/"
    ScriptAlias /cyber/ "/usr/cybercash/webroot/collectiblestodaytestsight-16/mck-cgi/"
    # "/oraapp/9iAS10220/home/Apache/Apache/cgi-bin" should be changed to whatever your ScriptAliased
    # CGI directory exists, if you have that configured.
    <Directory "/devl/ics3/devl/webroot/apache/cgi-bin">
    AllowOverride None
    Options None
    Order allow,deny
    Allow from all
    </Directory>
    <Directory "/usr/cybercash/webroot/collectiblestodaytestsight-16/mck-cgi">
    AllowOverride None
    Options None
    Order allow,deny
    Allow from all
    </Directory>
    </IfModule>
    # End of aliases.
    # Redirect allows you to tell clients about documents which used to exist in
    # your server's namespace, but do not anymore. This allows you to tell the
    # clients where to look for the relocated document.
    # Format: Redirect old-URI new-URL
    # Directives controlling the display of server-generated directory listings.
    <IfModule mod_autoindex.c>
    # FancyIndexing is whether you want fancy directory indexing or standard
    IndexOptions FancyIndexing
    # AddIcon* directives tell the server which icon to show for different
    # files or filename extensions. These are only displayed for
    # FancyIndexed directories.
    AddIconByEncoding (CMP,/icons/compressed.gif) x-compress x-gzip
    AddIconByType (TXT,/icons/text.gif) text/*
    AddIconByType (IMG,/icons/image2.gif) image/*
    AddIconByType (SND,/icons/sound2.gif) audio/*
    AddIconByType (VID,/icons/movie.gif) video/*
    AddIcon /icons/binary.gif .bin .exe
    AddIcon /icons/binhex.gif .hqx
    AddIcon /icons/tar.gif .tar
    AddIcon /icons/world2.gif .wrl .wrl.gz .vrml .vrm .iv
    AddIcon /icons/compressed.gif .Z .z .tgz .gz .zip
    AddIcon /icons/a.gif .ps .ai .eps
    AddIcon /icons/layout.gif .html .shtml .htm .pdf
    AddIcon /icons/text.gif .txt
    AddIcon /icons/c.gif .c
    AddIcon /icons/p.gif .pl .py
    AddIcon /icons/f.gif .for
    AddIcon /icons/dvi.gif .dvi
    AddIcon /icons/uuencoded.gif .uu
    AddIcon /icons/script.gif .conf .sh .shar .csh .ksh .tcl
    AddIcon /icons/tex.gif .tex
    AddIcon /icons/bomb.gif core
    AddIcon /icons/back.gif ..
    AddIcon /icons/hand.right.gif README
    AddIcon /icons/folder.gif ^^DIRECTORY^^
    AddIcon /icons/blank.gif ^^BLANKICON^^
    # DefaultIcon is which icon to show for files which do not have an icon
    # explicitly set.
    DefaultIcon /icons/unknown.gif
    # AddDescription allows you to place a short description after a file in
    # server-generated indexes. These are only displayed for FancyIndexed
    # directories.
    # Format: AddDescription "description" filename
    #AddDescription "GZIP compressed document" .gz
    #AddDescription "tar archive" .tar
    #AddDescription "GZIP compressed tar archive" .tgz
    # ReadmeName is the name of the README file the server will look for by
    # default, and append to directory listings.
    # HeaderName is the name of a file which should be prepended to
    # directory indexes.
    # If MultiViews are amongst the Options in effect, the server will
    # first look for name.html and include it if found. If name.html
    # doesn't exist, the server will then look for name.txt and include
    # it as plaintext if found.
    ReadmeName README
    HeaderName HEADER
    # IndexIgnore is a set of filenames which directory indexing should ignore
    # and not include in the listing. Shell-style wildcarding is permitted.
    IndexIgnore .??* *~ *# HEADER* README* RCS CVS *,v *,t
    </IfModule>
    # End of indexing directives.
    # Document types.
    <IfModule mod_mime.c>
    # AddEncoding allows you to have certain browsers (Mosaic/X 2.1+) uncompress
    # information on the fly. Note: Not all browsers support this.
    # Despite the name similarity, the following Add* directives have nothing
    # to do with the FancyIndexing customization directives above.
    AddEncoding x-compress Z
    AddEncoding x-gzip gz tgz
    # AddLanguage allows you to specify the language of a document. You can
    # then use content negotiation to give a browser a file in a language
    # it can understand.
    # Note 1: The suffix does not have to be the same as the language
    # keyword --- those with documents in Polish (whose net-standard
    # language code is pl) may wish to use "AddLanguage pl .po" to
    # avoid the ambiguity with the common suffix for perl scripts.
    # Note 2: The example entries below illustrate that in quite
    # some cases the two character 'Language' abbriviation is not
    # identical to the two character 'Country' code for its country,
    # E.g. 'Danmark/dk' versus 'Danish/da'.
    # Note 3: In the case of 'ltz' we violate the RFC by using a three char
    # specifier. But there is 'work in progress' to fix this and get
    # the reference data for rfc1766 cleaned up.
    # Danish (da) - Dutch (nl) - English (en) - Estonian (ee)
    # French (fr) - German (de) - Greek-Modern (el)
    # Italian (it) - Korean (kr) - Norwegian (no)
    # Portugese (pt) - Luxembourgeois* (ltz)
    # Spanish (es) - Swedish (sv) - Catalan (ca) - Czech(cz)
    # Polish (pl) - Brazilian Portuguese (pt-br) - Japanese (ja)
    # Russian (ru)
    AddLanguage da .da
    AddLanguage nl .nl
    AddLanguage en .en
    AddLanguage et .ee
    AddLanguage fr .fr
    AddLanguage de .de
    AddLanguage el .el
    AddLanguage he .he
    AddCharset ISO-8859-8 .iso8859-8
    AddLanguage it .it
    AddLanguage ja .ja
    AddCharset ISO-2022-JP .jis
    AddLanguage kr .kr
    AddCharset ISO-2022-KR .iso-kr
    AddLanguage no .no
    AddLanguage pl .po
    AddCharset ISO-8859-2 .iso-pl
    AddLanguage pt .pt
    AddLanguage pt-br .pt-br
    AddLanguage ltz .lu
    AddLanguage ca .ca
    AddLanguage es .es
    AddLanguage sv .se
    AddLanguage cz .cz
    AddLanguage ru .ru
    AddLanguage tw .tw
    AddCharset Big5 .Big5 .big5
    AddCharset WINDOWS-1251 .cp-1251
    AddCharset CP866 .cp866
    AddCharset ISO-8859-5 .iso-ru
    AddCharset KOI8-R .koi8-r
    AddCharset UCS-2 .ucs2
    AddCharset UCS-4 .ucs4
    AddCharset UTF-8 .utf8
    # LanguagePriority allows you to give precedence to some languages
    # in case of a tie during content negotiation.
    # Just list the languages in decreasing order of preference. We have
    # more or less alphabetized them here. You probably want to change this.
    <IfModule mod_negotiation.c>
    LanguagePriority en da nl et fr de el it ja kr no pl pt pt-br ru ltz ca es sv tw
    </IfModule>
    # AddType allows you to tweak mime.types without actually editing it, or to
    # make certain files to be certain types.
    # For example, the PHP 3.x module (not part of the Apache distribution - see
    # http://www.php.net) will typically use:
    #AddType application/x-httpd-php3 .php3
    #AddType application/x-httpd-php3-source .phps
    # And for PHP 4.x, use:
    #AddType application/x-httpd-php .php
    #AddType application/x-httpd-php-source .phps
    AddType application/x-tar .tgz
    # AddHandler allows you to map certain file extensions to "handlers",
    # actions unrelated to filetype. These can be either built into the server
    # or added with the Action command (see below)
    # If you want to use server side includes, or CGI outside
    # ScriptAliased directories, uncomment the following lines.
    # To use CGI scripts:
    #AddHandler cgi-script .cgi
    # To use server-parsed HTML files
    #AddType text/html .shtml
    #AddHandler server-parsed .shtml
    # Uncomment the following line to enable Apache's send-asis HTTP file
    # feature
    #AddHandler send-as-is asis
    # If you wish to use server-parsed imagemap files, use
    #AddHandler imap-file map
    # To enable type maps, you might want to use
    #AddHandler type-map var
    </IfModule>
    # End of document types.
    # Action lets you define media types that will execute a script whenever
    # a matching file is called. This eliminates the need for repeated URL
    # pathnames for oft-used CGI file processors.
    # Format: Action media/type /cgi-script/location
    # Format: Action handler-name /cgi-script/location
    # MetaDir: specifies the name of the directory in which Apache can find
    # meta information files. These files contain additional HTTP headers
    # to include when sending the document
    #MetaDir .web
    # MetaSuffix: specifies the file name suffix for the file containing the
    # meta information.
    #MetaSuffix .meta
    # Customizable error response (Apache style)
    # these come in three flavors
    # 1) plain text
    #ErrorDocument 500 "The server made a boo boo.
    # n.b. the single leading (") marks it as text, it does not get output
    # 2) local redirects
    ErrorDocument 404 /404error.htm
    ErrorDocument 500 /500error.htm
    # to redirect to local URL /missing.html
    #ErrorDocument 404 /cgi-bin/missing_handler.pl
    # N.B.: You can redirect to a script or a document using server-side-includes.
    # 3) external redirects
    #ErrorDocument 402 http://some.other_server.com/subscription_info.html
    # N.B.: Many of the environment variables associated with the original
    # request will not be available to such a script.
    # Customize behaviour based on the browser
    <IfModule mod_setenvif.c>
    # The following directives modify normal HTTP response behavior.
    # The first directive disables keepalive for Netscape 2.x and browsers that
    # spoof it. There are known problems with these browser implementations.
    # The second directive is for Microsoft Internet Explorer 4.0b2
    # which has a broken HTTP/1.1 implementation and does not properly
    # support keepalive when it is used on 301 or 302 (redirect) responses.
    BrowserMatch "Mozilla/2" nokeepalive
    BrowserMatch "MSIE 4\.0b2;" nokeepalive downgrade-1.0 force-response-1.0
    # The following directive disables HTTP/1.1 responses to browsers which
    # are in violation of the HTTP/1.0 spec by not being able to grok a
    # basic 1.1 response.
    BrowserMatch "RealPlayer 4\.0" force-response-1.0
    BrowserMatch "Java/1\.0" force-response-1.0
    BrowserMatch "JDK/1\.0" force-response-1.0
    </IfModule>
    # End of browser customization directives
    # Allow server status reports, with the URL of http://servername/server-status
    # Change the ".your_domain.com" to match your domain to enable.
    <Location /server-status>
    SetHandler server-status
    Order deny,allow
    Deny from all
    Allow from localhost web1-v3
    </Location>
    # Allow remote server configuration reports, with the URL of
    # http://servername/server-info (requires that mod_info.c be loaded).
    # Change the ".your_domain.com" to match your domain to enable.
    #<Location /server-info>
    # SetHandler server-info
    # Order deny,allow
    # Deny from all
    # Allow from localhost web1-v3
    #</Location>
    # There have been reports of people trying to abuse an old bug from pre-1.1
    # days. This bug involved a CGI script distributed as a part of Apache.
    # By uncommenting these lines you can redirect these attacks to a logging
    # script on phf.apache.org. Or, you can record them yourself, using the script
    # support/phf_abuse_log.cgi.
    #<Location /cgi-bin/phf*>
    # Deny from all
    # ErrorDocument 403 http://phf.apache.org/phf_abuse_log.cgi
    #</Location>
    # Proxy Server directives. Uncomment the following lines to
    # enable the proxy server:
    #<IfModule mod_proxy.c>
    # ProxyRequests On
    # <Directory proxy:*>
    # Order deny,allow
    # Deny from all
    # Allow from .your_domain.com
    # </Directory>
    # Enable/disable the handling of HTTP/1.1 "Via:" headers.
    # ("Full" adds the server version; "Block" removes all outgoing Via: headers)
    # Set to one of: Off | On | Full | Block
    # ProxyVia On
    # To enable the cache as well, edit and uncomment the following lines:
    # (no cacheing without CacheRoot)
    # CacheRoot "/oraapp/9iAS10220/home/Apache/Apache/proxy"
    # CacheSize 5
    # CacheGcInterval 4
    # CacheMaxExpire 24
    # CacheLastModifiedFactor 0.1
    # CacheDefaultExpire 1
    # NoCache a_domain.com another_domain.edu joes.garage_sale.com
    #</IfModule>
    # End of proxy directives.
    ### Section 3: Virtual Hosts
    # VirtualHost: If you want to maintain multiple domains/hostnames on your
    # machine you can setup VirtualHost containers for them. Most configurations
    # use only name-based virtual hosts so the server doesn't need to worry about
    # IP addresses. This is indicated by the asterisks in the directives below.
    # Please see the documentation at <URL:http://www.apache.org/docs/vhosts/>
    # for further details before you try to setup virtual hosts.
    # You may use the command line option '-S' to verify your virtual host
    # configuration.
    # If you want to use name-based virtual hosts you need to define at
    # least one IP address (and port number) for them.
    # Use name-based virtual hosting.
    #NameVirtualHost 12.34.56.78:80
    #NameVirtualHost 12.34.56.78
    #NameVirtualHost *
    # VirtualHost example:
    # Almost any Apache directive may go into a VirtualHost container.
    # The first VirtualHost section is used for requests without a known
    # server name.
    #<VirtualHost *>
    # ServerAdmin [email protected]_domain.com
    # DocumentRoot /www/docs/host.some_domain.com
    # ServerName host.some_domain.com
    # ErrorLog logs/host.some_domain.com-error_log
    # CustomLog logs/host.some_domain.com-access_log common
    #</VirtualHost>
    #<VirtualHost default:*>
    #</VirtualHost>
    ## SSL Global Context
    ## All SSL configuration in this context applies both to
    ## the main server and all SSL-enabled virtual hosts.
    # Some MIME-types for downloading Certificates and CRLs
    <IfDefine SSL>
    AddType application/x-x509-ca-cert .crt
    AddType application/x-pkcs7-crl .crl
    </IfDefine>
    <IfModule mod_ssl.c>
    # Pass Phrase Dialog:
    # Configure the pass phrase gathering process.
    # The filtering dialog program (`builtin' is a internal
    # terminal dialog) has to provide the pass phrase on stdout.
    SSLPassPhraseDialog builtin
    # Inter-Process Session Cache:
    # Configure the SSL Session Cache: First either `none'
    # or `dbm:/path/to/file' for the mechanism to use and
    # second the expiring timeout (in seconds).
    #SSLSessionCache none
    #SSLSessionCache shm:/devl/ics3/devl/apache/logs/ssl_scache(512000)
    SSLSessionCache dbm:/devl/ics3/devl/apache/logs/ssl_scache
    SSLSessionCacheTimeout 300
    # Semaphore:
    # Configure the path to the mutual explusion semaphore the
    # SSL engine uses internally for inter-process synchronization.
    SSLMutex file:/devl/ics3/devl/apache/logs/ssl_mutex
    # Pseudo Random Number Generator (PRNG):
    # Configure one or more sources to seed the PRNG of the
    # SSL library. The seed data should be of good random quality.
    # WARNING! On some platforms /dev/random blocks if not enough entropy
    # is available. This means you then cannot use the /dev/random device
    # because it would lead to very long connection times (as long as
    # it requires to make more entropy available). But usually those
    # platforms additionally provide a /dev/urandom device which doesn't
    # block. So, if available, use this one instead. Read the mod_ssl User
    # Manual for more details.
    SSLRandomSeed startup builtin
    SSLRandomSeed connect builtin
    #SSLRandomSeed startup file:/dev/random 512
    #SSLRandomSeed startup file:/dev/urandom 512
    #SSLRandomSeed connect file:/dev/random 512
    #SSLRandomSeed connect file:/dev/urandom 512
    # Logging:
    # The home of the dedicated SSL protocol logfile. Errors are
    # additionally duplicated in the general error log file. Put
    # this somewhere where it cannot be used for symlink attacks on
    # a real server (i.e. somewhere where only root can write).
    # Log levels are (ascending order: higher ones include lower ones):
    # none, error, warn, info, trace, debug.
    SSLLog /devl/ics3/devl/apache/logs/ssl_engine_log
    SSLLogLevel warn
    </IfModule>
    <IfDefine SSL>
    ## SSL Virtual Host Context
    <VirtualHost default:443>
    # General setup for the virtual host
    DocumentRoot "/devl/ics3/devl/webroot/apache"
    ServerName 172.18.4.13
    ServerAdmin [email protected]
    ErrorLog /devl/ics3/devl/apache/logs/error_log
    TransferLog /devl/ics3/devl/apache/logs/access_log
    # SSL Engine Switch:
    # Enable/Disable SSL for this virtual host.
    SSLEngine on
    # SSL Cipher Suite:
    # List the ciphers that the client is permitted to negotiate.
    # See the mod_ssl documentation for a complete list.
    #SSLCipherSuite ALL:!ADH:RC4+RSA:+HIGH:+MEDIUM:+LOW:+SSLv2:+EXP:+eNULL
    # Server Certificate:
    # Point SSLCertificateFile at a PEM encoded certificate. If
    # the certificate is encrypted, then you will be prompted for a
    # pass phrase. Note that a kill -HUP will prompt again. A test
    # certificate can be generated with `make certificate' under
    # built time. Keep in mind that if you've both a RSA and a DSA
    # certificate you can configure both in parallel (to also allow
    # the use of DSA ciphers, etc.)
    SSLCertificateFile /devl/ics3/devl/apache/ssl.crt/server.crt
    #SSLCertificateFile /devl/ics3/devl/apache/ssl.crt/server-dsa.crt
    # Server Private Key:
    # If the key is not combined with the certificate, use this
    # directive to point at the key file. Keep in mind that if
    # you've both a RSA and a DSA private key you can configure
    # both in parallel (to also allow the use of DSA ciphers, etc.)
    SSLCertificateKeyFile /devl/ics3/devl/apache/ssl.key/server.key
    #SSLCertificateKeyFile /devl/ics3/devl/apache/ssl.key/server-dsa.key
    # Server Certificate Chain:
    # Point SSLCertificateChainFile at a file containing the
    # concatenation of PEM encoded CA certificates which form the
    # certificate chain for the server certificate. Alternatively
    # the referenced file can be the same as SSLCertificateFile
    # when the CA certificates are directly appended to the server
    # certificate for convinience.
    #SSLCertificateChainFile /devl/ics3/devl/apache/ssl.crt/ca.crt
    # Certificate Authority (CA):
    # Set the CA certificate verification path where to find CA
    # certificates for client authentication or alternatively one
    # huge file containing all of them (file must be PEM encoded)
    # Note: Inside SSLCACertificatePath you need hash symlinks
    # to point to the certificate files. Use the provided
    # Makefile to update the hash symlinks after changes.
    #SSLCACertificatePath /devl/ics3/devl/apache/ssl.crt
    #SSLCACertificateFile /devl/ics3/devl/apache/ssl.crt/ca-bundle.crt
    # Certificate Revocation Lists (CRL):
    # Set the CA revocation path where to find CA CRLs for client
    # authentication or alternatively one huge file containing all
    # of them (file must be PEM encoded)
    # Note: Inside SSLCARevocationPath you need hash symlinks
    # to point to the certificate files. Use the provided
    # Makefile to update the hash symlinks after changes.
    #SSLCARevocationPath /devl/ics3/devl/apache/ssl.crl
    #SSLCARevocationFile /devl/ics3/devl/apache/ssl.crl/ca-bundle.crl
    # Client Authentication (Type):
    # Client certificate verification type and depth. Types are
    # none, optional, require and optional_no_ca. Depth is a
    # number which specifies how deeply to verify the certificate
    # issuer chain before deciding the certificate is not valid.
    #SSLVerifyClient require
    #SSLVerifyDepth 10
    # Access Control:
    # With SSLRequire you can do per-directory access control based
    # on arbitrary complex boolean expressions containing server
    # variable checks and other lookup directives. The syntax is a
    # mixture between C and Perl. See the mod_ssl documentation
    # for more details.
    #<Location />
    #SSLRequire ( %{SSL_CIPHER} !~ m/^(EXP|NULL)-/ \
    # and %{SSL_CLIENT_S_DN_O} eq "Snake Oil, Ltd." \
    # and %{SSL_CLIENT_S_DN_OU} in {"Staff", "CA", "Dev"} \
    # and %{TIME_WDAY} >= 1 and %{TIME_WDAY} <= 5 \
    # and %{TIME_HOUR} >= 8 and %{TIME_HOUR} <= 20 ) \
    # or %{REMOTE_ADDR} =~ m/^192\.76\.162\.[0-9]+$/
    #</Location>
    # SSL Engine Options:
    # Set various options for the SSL engine.
    # o FakeBasicAuth:
    # Translate the client X.509 into a Basic Authorisation. This means that
    # the standard Auth/DBMAuth methods can be used for access control. The
    # user name is the `one line' version of the client's X.509 certificate.
    # Note that no password is obtained from the user. Every entry in the user
    # file needs this password: `xxj31ZMTZzkVA'.
    # o ExportCertData:
    # This exports two additional environment variables: SSL_CLIENT_CERT and
    # SSL_SERVER_CERT. These contain the PEM-encoded certificates of the
    # server (always existing) and the client (only existing when client
    # authentication is used). This can be used to import the certificates
    # into CGI scripts.
    # o StdEnvVars:
    # This exports the standard SSL/TLS related `SSL_*' environment variables.
    # Per default this exportation is switched off for performance reasons,
    # because the extraction step is an expensive operation and is usually
    # useless for serving static content. So one usually enables the
    # exportation for CGI and SSI requests only.
    # o CompatEnvVars:
    # This exports obsolete environment variables for backward compatibility
    # to Apache-SSL 1.x, mod_ssl 2.0.x, Sioux 1.0 and Stronghold 2.x. Use this
    # to provide compatibility to existing CGI scripts.
    # o StrictRequire:
    # This denies access when "SSLRequireSSL" or "SSLRequire" applied even
    # under a "Satisfy any" situation, i.e. when it applies access is denied
    # and no other module can change it.
    # o OptRenegotiate:
    # This enables optimized SSL connection renegotiation handling when SSL
    # directives are used in per-directory context.
    #SSLOptions FakeBasicAuth ExportCertData CompatEnvVars StrictRequire
    <Files ~ "\.(cgi|shtml)$">
    SSLOptions +StdEnvVars
    </Files>
    #<Directory "/oraapp/9iAS10220/home/Apache/Apache/cgi-bin">
    <Directory "/devl/ics3/devl/webroot/apache/cgi-bin">
    SSLOptions +StdEnvVars
    </Directory>
    # SSL Protocol Adjustments:
    # The safe and default but still SSL/TLS standard compliant shutdown
    # approach is that mod_ssl sends the close notify alert but doesn't wait for
    # the close notify alert from client. When you need a different shutdown
    # approach you can use one of the following variables:
    # o ssl-unclean-shutdown:
    # This forces an unclean shutdown when the connection is closed, i.e. no
    # SSL close notify alert is send or allowed to received. This violates
    # the SSL/TLS standard but is needed for some brain-dead browsers. Use
    # this when you receive I/O errors because of the standard approach where
    # mod_ssl sends the close notify alert.
    # o ssl-accurate-shutdown:
    # This forces an accurate shutdown when the connection is closed, i.e. a
    # SSL close notify alert is send and mod_ssl waits for the close notify
    # alert of the client. This is 100% SSL/TLS standard compliant, but in
    # practice often causes hanging connections with brain-dead browsers. Use
    # this only for browsers where you know that their SSL implementation
    # works correctly.
    # Notice: Most problems of broken clients are also related to the HTTP
    # keep-alive facility, so you usually additionally want to disable
    # keep-alive for those clients, too. Use variable "nokeepalive" for this.
    SetEnvIf User-Agent ".*MSIE.*" nokeepalive ssl-unclean-shutdown
    # Per-Server Logging:
    # The home of a custom SSL log file. Use this when you want a
    # compact non-error SSL logfile on a virtual host basis.
    CustomLog /devl/ics3/devl/apache/logs/ssl_request_log \
    "%t %h %{SSL_PROTOCOL}x %{SSL_CIPHER}x \"%r\" %b"
    </VirtualHost>
    </IfDefine>
    <IfModule mod_dms.c>
    <Location /dms0>
    SetHandler dms-handler
    </Location>
    </IfModule>
    # Perl Directives
    #PerlWarn On
    #PerlFreshRestart On
    #PerlSetEnv PERL5OPT Tw
    #PerlSetEnv PERL5LIB "/oraapp/9iAS10220/home/Apache/perl/lib/5.00503:/oraapp/9iAS10220/home/Apache/perl/lib/site_perl/5.005"
    SetEnv PERL5LIB "/oraapp/9iAS10220/home/Apache/perl/lib/5.00503:/oraapp/9iAS10220/home/Apache/perl/lib/site_perl/5.005"
    PerlModule Apache
    #PerlModule Apache::Status
    PerlModule Apache::Registry
    #PerlModule Apache::CGI
    #PerlModule Apache::DBI
    #PerlRequire
    <Location /perl>
    SetHandler perl-script
    PerlHandler Apache::Registry
    AddHandler perl-script .pl
    Options +ExecCGI
    PerlSendHeader On
    </Location>
    #<Location /perl-status>
    # SetHandler perl-script
    # PerlHandler Apache::Status
    # order deny,allow
    # deny from all
    # allow from .your_domain.com
    #</Location>
    # Setup of oprocmgr module.
    # This directive identifies each remote apache instance that will be
    # sending requests to processes (e.g., JServs), managed by local Apache
    # instances. This directive is used by the local process manager to share
    # routing information with remote apache instances via non-SSL HTTP messages.
    # The directive is repeated for each remote apache instance that will be
    # sending requests. The ProcNode directive that refers to the local apache
    # instance will be ignored, but may be supplied to facilitate uniformity
    # in configuration across apache instances. Arguments to the ProcNode must
    # be sufficient to reach the remote instance of apache via non-SSL HTTP
    # messages. It is not considered an error if the remote apache instance is
    # unreachable, as no assumption is made about the starting order or
    # availability of apache instances.
    # Syntax: ProcNode <hostname> <port>
    # Example: ProcNode abc.com 7777
    <IfModule mod_oprocmgr.c>
    ProcNode web1-v3 7777
    <IfDefine SSL>
    ProcNode web1-v3 80
    </IfDefine>
    <Location /oprocmgr-service>
    SetHandler oprocmgr-service
    </Location>
    <Location /oprocmgr-status>
    SetHandler oprocmgr-status
    </Location>
    </IfModule>
    # Setup of FastCGI module
    <IfModule mod_fastcgi.c>
    Alias /fastcgi/ "/devl/ics3/devl/webroot/apache/fastcgi/"
    ScriptAlias /fcgi-bin/ "/devl/ics3/devl/webroot/apache/fcgi-bin/"
    <Directory "/devl/ics3/devl/webroot/apache/fcgi-bin">
    AllowOverride None
    Options None
    Order allow,deny
    Allow from all
    SetHandler fastcgi-script
         <IfDefine SSL>
    SSLOptions +StdEnvVars
         </IfDefine>
    </Directory>
    </IfModule>
    <IfModule mod_proxy.c>
    proxyRequests off
    proxyPass /cust http://172.18.4.13:7778/cust
    proxyPassReverse /cust http://172.18.4.13:7778/cust
    proxyPass /ct http://172.18.4.13:7778/ct
    proxyPassReverse /ct http://172.18.4.13:7778/ct
    </IfModule>
    #<IfModule mod_proxy.c>
    # proxyRequests on
    # proxyPass /ct http://172.18.4.13:7778/ct
    # proxyPassReverse /ct http://172.18.4.13:7778/ct
    #</IfModule>
    # Include the configuration files needed for jserv
    include "/oraapp/9iAS10220/home/Apache/Jserv/etc/jserv.conf"
    ApJServMount / /ct
    AddType text/jsp .jsp
    AddHandler jserv-servlet .jsp
    # Include the Oracle configuration file for custom settings
    #include "/devl/ics3/devl/apache/oracle_apache.conf"
    <VirtualHost 172.18.4.13:80>
    ServerName ics3dv1ws1.hq.bradgroup
    DocumentRoot /devl/ics3/devl/webroot/apache
    ServerAlias www.ics3dv1ws1.hq.bradgroup
    </VirtualHost>
    # <VirtualHost     172.18.4.13:80>
    ServerName %1.collectiblestoday.com
    VirtualDocumentRoot /devl/ics3/devl/webroot/oc4j/ct/web
    # </VirtualHost>

    Weird ... that works.
    So, I created the dummy account which was also failing as follows:
    create user newuser identified by oracle;
    grant developer_role to newuser;This fails, but only from a Form running under OC4J, until I run:
    ALTER SYSTEM SET sec_case_sensitive_logon = FALSE scope = MEMORY;While I've made this change in our development database, I don't really want to do the same eventually in PROD. I'd rather figure out what's changed about how OC4J connects, find a rememdy there, and set this back to TRUE.
    Since I didn't create the username or password as a string literal (to ensure lowercasing), I'm confused as to what's happening. When the init parm is set to TRUE, when the dialog box pops up for the form after the invalid username/password error, I tried entering the password in all lowercase, and then in all uppercase, to no effect. Both fail.
    --=Chuck

  • Migrating from JServ to OC4J: problems with XSQLServlet configuration

    I'm trying to move an application using xsql pages from 9iAS to 10g (9.04). Development is currently done under JDev9 (9.02) an its OC4J standalone server.
    I guess I've done most of the configurations, since the application is working correctly now, BUT only with the connections defined statically in the XSQLConfig.xml of the XSQLServlet. On JServ, we implemented our own connection manager to pass our connections to the XSQLServlet as defined by the <connection-manager><factory> tag. Now, under OC4J, this no longer works:
    The log files tells:
    Failed to create custom connection manager factory: "our.connection.manager.factory": Using default.
    And with the default one, we get of course the 'cannot acquire database connection' error message which is ok, since we're not using one of those defined under XSQLConfig.xml...
    Background: Our connection manager is contained in a jar file with many other classes. These are visible to the 2 applications ("P" and "T") we're running successfully under OC4J Standalone. As I interprete the message as the XSQLServlet not being able to create an instance of our ConnectionManager, I guess I missed somewhere an library or classpath entry??
    Many thanx for any hints!

    There was a generic Migration guide produced for the earlier 9.0.2 release with some content on migrating from JServ to OC4J.
    http://download-west.oracle.com/docs/cd/A97331_08/migrate.902/migrate/intapps.htm#1006415
    It's hard to provide much help without more details.
    cheers
    -steve-

  • Performance benchmarks within BPC

    Has anyone ever performed any benchmarks with BPC?
    I know there is such a wide spectrum of elements that go into benchmarking a BPC solution that most benchmarks can not easily be correlated to each other. (i.e., Platform, environment, dimensionality, hierarchies u2026) Any estimates would be a great benefit.
    Iu2019m hoping someone has performed some serious performance benchmarks such as;
    u2022 Data throughput, (time to submit data such as 1000 cells per minute).
    u2022 Query time, (x row by x column expansion and query).
    Thanks in advance for your input and assistance!
    Fletch

    Hi David,
    I agree with you about your point on performance benchmarks. However I don't know if you are already aware of the performance tuining guide available at:
    https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/9016a6b9-3309-2b10-2d91-8233450139c1
    Also you may want to have a look at OSS note 1124332.
    Regards
    Pravin

  • We want to deploy Servlet/JSP in JServ and call the EJB's deployed in iPlanet App Server 6.0 SP2. How do we make the getInitialContext Call be able to access the EJB's.

    Additionally what configurations do we need to make sure we have on JServ (Third party Servlet container) to make sure that the iPlanet EJB's can be accessed.

    Let me preface my instructions with the comment that this isn't a good idea. Although the J2EE specification allows you seperate your web container from your EJB container, in practical deployments it is a bad idea. The overhead of doing RMI/IIOP calls to an external container as opposed to making inter-JVM calls means that you can expect roughly an order of magnitude less performance than if you colocate your web and EJB containers. (This is why all EJB containers are also web containers, or at least have the provision to install themselves in the same JVM as a web container.)
    That said, if you do not have the option to move the servlets to iAS, you can access EJB's in iAS from JServ the same way that you would from any remote client. Take a look at the following information for more detail:
    Chapter 9 of the developer's guide ( this shows you what changes you need to make to the remote JVM (at JServ) and in the EJB's that you are exposing).
    The RMI/IIOP sample application. This gives you an example of how to access EJB's from outside the container.
    (To answer your direct question, the following code will get the initial context. But if you don't take all of the other configuration steps, this code won't work:
    env.put("java.naming.factory.initial", "com.sun.jndi.cosnaming.CNCtxFactory");
    env.put("java.naming.provider.url", "iiop://" + host + ":"+port);
    Context initial = new InitialContext(env);
    I'd also suggest that you approach the task with the following approach. (Assuming that I haven't managed to convince you that this is a really bad idea.)
    1. Get your EJB's working on iAS. Test them with servlet harnesses running on iAS.
    2. Get your servlets working on JServ, if they aren't already.
    3. Create a simple standalone Java application as a test harness for EJB's. Follow the RMI/IIOP instructions until you get this test harness working.
    4. Create a simple servlet test harness in JServ to access your EJb's. Follow the JVM setup instrucitons until you get this working.
    5. Actually integrate the EJB's with your production application.
    I say this because there are about five trillion things that can go wrong in this process. Although the troubleshooting steps in the docs are helpful, I find that it helps to get one thing working at a time. It's very frustrating to spend a day trying to resolve JNDI issues only to find out that you have your CXS configured improperly.

  • Free RAM - a dif in iBook performance between 25M and 1G?

    Hi...I keep several programs running on my iBook 1.33 with 768 onboard. Activity Monitor shows that at its lowest, my free RAM dips to around 25 or so megs when I'm streaming video from a news site.
    My question is whether or not there is a difference in the Book's performance when I have 25 megs of free RAM....or 500 megs? Or being "in the green" means that there is simply enough...being "greener" won't make a difference...
    I know that more is always better, but I'd like to know if more is necessary.
    The answer will determine whether or not I switch out the 512 for a 1G.
    I'd appreciate any feedback...Thanx!

    In those instances where chip RAM is needed (and not in a video-intensive
    situation where you can't upgrade VRAM, and regular RAM is not shared)
    the chip RAM is faster and more readily is available to priority applications
    and the OS X system itself. And Virtual Memory (VM) is slower, due to
    the fact that is derived by the computer having to read-write to/from the
    internal hard disk drive, and that is a slower and less-direct process.
    Another way to speed up a limited upgrade option computer would be to
    pay to have (or be brave and suffer any consequences, and DIY) the
    internal hard disk drive replaced with a faster spin-rate new drive which
    also has a larger buffer - and - more free space. This and the chip RAM
    could make the computer act more like a faster model computer. At
    least until the hard disk drive gets fragmented and or more than 3/4 full.
    There are more than a few things one can do to enhance the performance
    of the hard to upgrade iBook G4 (or iMac G4) since you can't change the
    CPU or make the system bus work any faster. Bottlenecks aside, a few
    items that can be upgraded, along with a regimen of routine maintenance
    can help almost any computer not pushed beyond its limits, to work better.
    Even with a hard disk drive only 75% full, it can be more sluggish and
    waste processing and swap-file cycles (moving data bits as VM to/from
    the hard disk drive when taxing the limited resources of the computer)
    if the hard disk drive has never seen much maintenance. If you use an
    external FireWire enclosed hard disk drive, and learn how to clone the
    whole iBook's drive contents over, then be sure the clone-copy can boot
    the computer, before proceeding; you could use the disk utility to wipe
    the drive and use the zero-overwrite option, totally erasing and then to
    reformat the drive again, to clear any low-level issues and defragment
    the drive, (plus pull any seldom used saved items off the computer,
    to free-up hard disk drive space, for the system to use as swap & VM)
    you could also reclaim some of the original illusions of speed now lost.
    {As the computer's OS gets more and more parts, updates and also
    any application and associated files to sort through, it will run slower;
    VM also this adds into the mix, with a fuller and older hard disk drive.}
    In reference to: ' replacing an iBook G4's hard disk drive? ' you may wish to
    read links here: http://www.applelinks.com/index.php/forums/viewthread/142/
    In reference to bootable clones of OS X systems:
    http://www.bombich.com/software/ccc.html
    Minor to major background maintenance, preventative, can be helped
    through the use of this utility interface tool; it can help the OS X and
    your computer generally run a bit better. I use OnyX's 'automation'
    selection and also have this utility's preferences set for it to restart
    by itself after it runs all of the checkboxed items in this set. For this,
    see: Titanium Software - OnyX: http://www.titanium.free.fr/pgs/english.html
    Also, About Disk Utility's Repair Disk Permissions (& 'repair disk' from
    the booted installer's version of Disk Utility; research this further.)
    http://support.apple.com/kb/HT1452
    Sometimes, even just repairing those disk permissions can help; and
    the OnyX tool can run that, as part of the Automation sequence; but
    it should be run more often from D.U. than you'd need to use OnyX.
    Troubleshooting permissions issues in OS X (and using Disk Utility)
    http://docs.info.apple.com/article.html?artnum=106712
    There is a relationship between RAM, free HDD space as Virtual Memory,
    system maintenance, disk drive health, and other interrelated details.
    Good luck & happy computing!
    edited 2x to add links.

  • How do I use toplink with Spring 2.5 and oc4j 10.1.2?

    Our existing java server environment is limited to Oc4j 10.1.2 due to being tied to Oracle Forms.
    We've added a java 6 jdk to the machine and linked it to a specific container to examine some newer java features since this version of the application server only comes with java 1.4.2.
    Does anyone have some configuration steps for getting toplink essentials and spring to work with oc4j 10.1.2? Even with oc4j 10.1.3 in jdev 10.1.3.4 I'm having problems trying to figure out what needs placed in the persistence.xml file verses what needs placed in the spring-beans.xml file.
    I'm trying to either use the J2SE option of keeping the connection information in the persistence.xml file (which doesn't work) - it tries to connect to //localhost:1521/orcl. If I try to define a datasource within Spring's xml file, I'm not sure how to tie that into the persistence.xml file. Could I use the oc4j 10.1.2 container provided datasource?
    It seems like I'm at a loss as to how to get this working. If you'd like me to post some files, I can do that later on today when I get back to work.
    The configuration that I'm trying to do is based on a modified workspace from an ibm developerworks article with websphere, mixing in the ideas from a JPA with Spring 2.0 article from Mike Keith and Rod Johnson. (That article goes pretty far in the configuration information but never provided an example to download...)
    Any help appreciated.
    Eric (hbg, pa)

    I'm still at a loss with this. Rather than worry about the older version, for now, I just want to see JPA in action. So, I've decided on just running the Spring 2.5.6 petclinic example out of the samples folder. When I try to do this, after only tweaking the web.xml to use the applicationContext-jpa.xml file, the application does not initialize properly. Here's the stack trace I get:
    Target URL -- http://192.168.0.2:8988/petclinic/index.jsp
    09/05/11 23:26:05 Oracle Containers for J2EE 10g (10.1.3.4.0)  initialized
    WARNING: Code-source C:\javalib\spring-2.5.6\samples\petclinic\war\WEB-INF\lib\connector.jar (from WEB-INF/lib/ directory in C:\javalib\spring-2.5.6\samples\petclinic\war\WEB-INF\lib) has the same filename but is not identical to /C:/jdev10134/j2ee/home/lib/connector.jar (from <code-source> (ignore manifest Class-Path) in META-INF/boot.xml in C:\jdev10134\j2ee\home\oc4j.jar). If it contains different versions of the same classes, it will be masked as the latter is already visible in the search path of loader current-workspace-app.web.petclinic:0.0.0.
    WARNING: Code-source C:\javalib\spring-2.5.6\samples\petclinic\war\WEB-INF\lib\jta.jar (from WEB-INF/lib/ directory in C:\javalib\spring-2.5.6\samples\petclinic\war\WEB-INF\lib) has the same filename but is not identical to /C:/jdev10134/j2ee/home/lib/jta.jar (from <code-source> (ignore manifest Class-Path) in META-INF/boot.xml in C:\jdev10134\j2ee\home\oc4j.jar). If it contains different versions of the same classes, it will be masked as the latter is already visible in the search path of loader current-workspace-app.web.petclinic:0.0.0.
    WARNING: Code-source C:\javalib\spring-2.5.6\samples\petclinic\war\WEB-INF\lib\persistence.jar (from WEB-INF/lib/ directory in C:\javalib\spring-2.5.6\samples\petclinic\war\WEB-INF\lib) has the same filename but is not identical to /C:/jdev10134/j2ee/home/lib/persistence.jar (from <code-source> (ignore manifest Class-Path) in META-INF/boot.xml in C:\jdev10134\j2ee\home\oc4j.jar). If it contains different versions of the same classes, it will be masked as the latter is already visible in the search path of loader current-workspace-app.web.petclinic:0.0.0.
    WARNING: Code-source C:\javalib\spring-2.5.6\samples\petclinic\war\WEB-INF\lib\toplink-essentials.jar (from WEB-INF/lib/ directory in C:\javalib\spring-2.5.6\samples\petclinic\war\WEB-INF\lib) has the same filename but is not identical to /C:/jdev10134/toplink/jlib/toplink-essentials.jar (from <code-source> in /C:/jdev10134/jdev/system/oracle.j2ee.10.1.3.42.70/embedded-oc4j/config/server.xml). If it contains different versions of the same classes, it will be masked as the latter is already visible in the search path of loader current-workspace-app.web.petclinic:0.0.0.
    09/05/11 23:26:24 log4j: Parsing for [root] with value=[INFO, stdout].
    09/05/11 23:26:24 log4j: Level token is [INFO].
    09/05/11 23:26:24 log4j: Category root set to INFO
    09/05/11 23:26:24 log4j: Parsing appender named "stdout".
    09/05/11 23:26:24 log4j: Parsing layout options for "stdout".
    09/05/11 23:26:24 log4j: Setting property [conversionPattern] to [%d %p [%c] - <%m>%n].
    09/05/11 23:26:24 log4j: End of parsing for "stdout".
    09/05/11 23:26:24 log4j: Parsed "stdout" options.
    09/05/11 23:26:24 log4j: Parsing for [org.springframework.samples.petclinic.aspects] with value=[DEBUG].
    09/05/11 23:26:24 log4j: Level token is [DEBUG].
    09/05/11 23:26:24 log4j: Category org.springframework.samples.petclinic.aspects set to DEBUG
    09/05/11 23:26:24 log4j: Handling log4j.additivity.org.springframework.samples.petclinic.aspects=[null]
    09/05/11 23:26:24 log4j: Finished configuring.
    09/05/11 23:26:24 log4j: Reading configuration from URL file:/C:/javalib/spring-2.5.6/samples/petclinic/war/WEB-INF/classes/log4j.properties
    09/05/11 23:26:24 log4j: Parsing for [root] with value=[INFO, stdout].
    09/05/11 23:26:24 log4j: Level token is [INFO].
    09/05/11 23:26:24 log4j: Category root set to INFO
    09/05/11 23:26:24 log4j: Parsing appender named "stdout".
    09/05/11 23:26:24 log4j: Parsing layout options for "stdout".
    09/05/11 23:26:24 log4j: Setting property [conversionPattern] to [%d %p [%c] - <%m>%n].
    09/05/11 23:26:24 log4j: End of parsing for "stdout".
    09/05/11 23:26:24 log4j: Parsed "stdout" options.
    09/05/11 23:26:24 log4j: Parsing for [org.springframework.samples.petclinic.aspects] with value=[DEBUG].
    09/05/11 23:26:24 log4j: Level token is [DEBUG].
    09/05/11 23:26:24 log4j: Category org.springframework.samples.petclinic.aspects set to DEBUG
    09/05/11 23:26:24 log4j: Handling log4j.additivity.org.springframework.samples.petclinic.aspects=[null]
    09/05/11 23:26:24 log4j: Finished configuring.
    2009-05-11 23:26:24,593 INFO [org.springframework.web.context.ContextLoader] - <Root WebApplicationContext: initialization started>
    2009-05-11 23:26:24,687 INFO [org.springframework.web.context.support.XmlWebApplicationContext] - <Refreshing org.springframework.web.context.support.XmlWebApplicationContext@eeb406: display name [Root WebApplicationContext]; startup date [Mon May 11 23:26:24 EDT 2009]; root of context hierarchy>
    2009-05-11 23:26:24,828 INFO [org.springframework.beans.factory.xml.XmlBeanDefinitionReader] - <Loading XML bean definitions from ServletContext resource [WEB-INF/applicationContext-jpa.xml]>
    2009-05-11 23:26:25,281 INFO [org.springframework.web.context.support.XmlWebApplicationContext] - <Bean factory for application context [org.springframework.web.context.support.XmlWebApplicationContext@eeb406]: org.springframework.beans.factory.support.DefaultListableBeanFactory@1da817b>
    2009-05-11 23:26:25,734 INFO [org.springframework.beans.factory.config.PropertyPlaceholderConfigurer] - <Loading properties file from class path resource [jdbc.properties]>
    2009-05-11 23:26:25,796 INFO [org.springframework.context.weaving.DefaultContextLoadTimeWeaver] - <Determined server-specific load-time weaver: org.springframework.instrument.classloading.oc4j.OC4JLoadTimeWeaver>
    2009-05-11 23:26:28,296 INFO [org.springframework.web.context.support.XmlWebApplicationContext] - <Bean 'org.springframework.orm.jpa.vendor.TopLinkJpaVendorAdapter#c25ae3' is not eligible for getting processed by all BeanPostProcessors (for example: not eligible for auto-proxying)>
    2009-05-11 23:26:28,359 INFO [org.springframework.web.context.support.XmlWebApplicationContext] - <Bean 'dataSource' is not eligible for getting processed by all BeanPostProcessors (for example: not eligible for auto-proxying)>
    2009-05-11 23:26:28,437 INFO [org.springframework.orm.jpa.LocalContainerEntityManagerFactoryBean] - <Building JPA container EntityManagerFactory for persistence unit 'PetClinic'>
    2009-05-11 23:26:28,468 INFO [org.springframework.web.context.support.XmlWebApplicationContext] - <Bean 'entityManagerFactory' is not eligible for getting processed by all BeanPostProcessors (for example: not eligible for auto-proxying)>
    2009-05-11 23:26:28,562 INFO [org.springframework.beans.factory.support.DefaultListableBeanFactory] - <Pre-instantiating singletons in org.springframework.beans.factory.support.DefaultListableBeanFactory@1da817b: defining beans [org.springframework.context.weaving.AspectJWeavingEnabler#0,org.springframework.context.config.internalBeanConfigurerAspect,loadTimeWeaver,org.springframework.beans.factory.config.PropertyPlaceholderConfigurer#0,dataSource,entityManagerFactory,transactionManager,org.springframework.context.annotation.internalPersistenceAnnotationProcessor,org.springframework.context.annotation.internalCommonAnnotationProcessor,org.springframework.context.annotation.internalAutowiredAnnotationProcessor,org.springframework.context.annotation.internalRequiredAnnotationProcessor,org.springframework.transaction.config.internalTransactionAspect,org.springframework.samples.petclinic.aspects.UsageLogAspect#0,org.springframework.dao.annotation.PersistenceExceptionTranslationPostProcessor#0,clinic]; root of factory hierarchy>
    2009-05-11 23:26:29,671 INFO [org.springframework.web.context.ContextLoader] - <Root WebApplicationContext: initialization completed in 5078 ms>
    2009-05-11 23:26:29,734 INFO [org.springframework.web.servlet.DispatcherServlet] - <FrameworkServlet 'petclinic': initialization started>
    2009-05-11 23:26:29,734 INFO [org.springframework.web.context.support.XmlWebApplicationContext] - <Refreshing org.springframework.web.context.support.XmlWebApplicationContext@c00e55: display name [WebApplicationContext for namespace 'petclinic-servlet']; startup date [Mon May 11 23:26:29 EDT 2009]; parent: org.springframework.web.context.support.XmlWebApplicationContext@eeb406>
    2009-05-11 23:26:29,734 INFO [org.springframework.beans.factory.xml.XmlBeanDefinitionReader] - <Loading XML bean definitions from ServletContext resource [WEB-INF/petclinic-servlet.xml]>
    2009-05-11 23:26:30,171 INFO [org.springframework.web.context.support.XmlWebApplicationContext] - <Bean factory for application context [org.springframework.web.context.support.XmlWebApplicationContext@c00e55]: org.springframework.beans.factory.support.DefaultListableBeanFactory@1c5543b>
    2009-05-11 23:26:30,375 INFO [org.springframework.beans.factory.support.DefaultListableBeanFactory] - <Pre-instantiating singletons in org.springframework.beans.factory.support.DefaultListableBeanFactory@1c5543b: defining beans [addOwnerForm,addPetForm,addVisitForm,clinicController,editOwnerForm,editPetForm,findOwnersForm,org.springframework.context.annotation.internalPersistenceAnnotationProcessor,org.springframework.context.annotation.internalCommonAnnotationProcessor,org.springframework.context.annotation.internalAutowiredAnnotationProcessor,org.springframework.context.annotation.internalRequiredAnnotationProcessor,org.springframework.web.servlet.mvc.annotation.AnnotationMethodHandlerAdapter#0,org.springframework.web.servlet.handler.SimpleMappingExceptionResolver#0,org.springframework.web.servlet.view.InternalResourceViewResolver#0,messageSource]; parent: org.springframework.beans.factory.support.DefaultListableBeanFactory@1da817b>
    2009-05-11 23:26:31,828 INFO [org.springframework.web.servlet.DispatcherServlet] - <FrameworkServlet 'petclinic': initialization completed in 2094 ms>
    May 11, 2009 11:26:58 PM oracle.toplink.essentials.session.file:/C:/javalib/spring-2.5.6/samples/petclinic/war/WEB-INF/classes/-PetClinic.transaction
    WARNING: PersistenceUnitInfo PetClinic has transactionType RESOURCE_LOCAL and therefore jtaDataSource will be ignored
    May 11, 2009 11:26:58 PM oracle.toplink.essentials.session.file:/C:/javalib/spring-2.5.6/samples/petclinic/war/WEB-INF/classes/-PetClinic
    INFO: TopLink, version: Oracle TopLink Essentials - 2.0.1 (Build b09d-fcs (12/06/2007))
    May 11, 2009 11:26:58 PM oracle.toplink.essentials.session.file:/C:/javalib/spring-2.5.6/samples/petclinic/war/WEB-INF/classes/-PetClinic
    INFO: Server: unknown
    May 11, 2009 11:26:58 PM oracle.toplink.essentials.session.file:/C:/javalib/spring-2.5.6/samples/petclinic/war/WEB-INF/classes/-PetClinic.connection
    CONFIG: connecting(DatabaseLogin(
            platform=>EssentialsHSQLPlatformWithNativeSequence
            user name=> ""
            connector=>JNDIConnector datasource name=>null
    May 11, 2009 11:27:03 PM oracle.toplink.essentials.session.file:/C:/javalib/spring-2.5.6/samples/petclinic/war/WEB-INF/classes/-PetClinic
    SEVERE:
    Local Exception Stack:
    Exception [TOPLINK-4002] (Oracle TopLink Essentials - 2.0.1 (Build b09d-fcs (12/06/2007))): oracle.toplink.essentials.exceptions.DatabaseException
    Internal Exception: java.sql.SQLException: Io exception: The Network Adapter could not establish the connection
    Error Code: 17002
            at oracle.toplink.essentials.exceptions.DatabaseException.sqlException(DatabaseException.java:305)
            at oracle.toplink.essentials.jndi.JNDIConnector.connect(JNDIConnector.java:150)
            at oracle.toplink.essentials.sessions.DatasourceLogin.connectToDatasource(DatasourceLogin.java:184)
            at oracle.toplink.essentials.internal.databaseaccess.DatasourceAccessor.connect(DatasourceAccessor.java:233)
            at oracle.toplink.essentials.internal.databaseaccess.DatabaseAccessor.connect(DatabaseAccessor.java:242)
            at oracle.toplink.essentials.internal.databaseaccess.DatasourceAccessor.connect(DatasourceAccessor.java:309)
            at oracle.toplink.essentials.threetier.ConnectionPool.buildConnection(ConnectionPool.java:117)
            at oracle.toplink.essentials.threetier.ExternalConnectionPool.startUp(ExternalConnectionPool.java:135)
            at oracle.toplink.essentials.threetier.ServerSession.connect(ServerSession.java:451)
            at oracle.toplink.essentials.internal.sessions.DatabaseSessionImpl.login(DatabaseSessionImpl.java:616)
            at oracle.toplink.essentials.ejb.cmp3.EntityManagerFactoryProvider.login(EntityManagerFactoryProvider.java:282)
            at oracle.toplink.essentials.internal.ejb.cmp3.EntityManagerSetupImpl.deploy(EntityManagerSetupImpl.java:229)
            at oracle.toplink.essentials.internal.ejb.cmp3.base.EntityManagerFactoryImpl.getServerSession(EntityManagerFactoryImpl.java:93)
            at oracle.toplink.essentials.internal.ejb.cmp3.base.EntityManagerFactoryImpl.createEntityManagerImpl(EntityManagerFactoryImpl.java:126)
            at oracle.toplink.essentials.internal.ejb.cmp3.base.EntityManagerFactoryImpl.createEntityManagerImpl(EntityManagerFactoryImpl.java:120)
            at oracle.toplink.essentials.internal.ejb.cmp3.EntityManagerFactoryImpl.createEntityManager(EntityManagerFactoryImpl.java:91)
            at org.springframework.orm.jpa.JpaTransactionManager.createEntityManagerForTransaction(JpaTransactionManager.java:392)
            at org.springframework.orm.jpa.JpaTransactionManager.doBegin(JpaTransactionManager.java:320)
            at org.springframework.transaction.support.AbstractPlatformTransactionManager.getTransaction(AbstractPlatformTransactionManager.java:374)
            at org.springframework.transaction.interceptor.TransactionAspectSupport.createTransactionIfNecessary(TransactionAspectSupport.java:263)
            at org.springframework.transaction.interceptor.TransactionAspectSupport.createTransactionIfNecessary(TransactionAspectSupport.java:220)
            at org.springframework.transaction.aspectj.AbstractTransactionAspect.ajc$before$org_springframework_transaction_aspectj_AbstractTransactionAspect$1$2a73e96c(AbstractTransactionAspect.aj:63)
            at org.springframework.samples.petclinic.jpa.EntityManagerClinic.getVets(EntityManagerClinic.java:39)
            at sun.reflect.NativeMethodAccessorImpl.invoke0(Native Method)
            at sun.reflect.NativeMethodAccessorImpl.invoke(NativeMethodAccessorImpl.java:39)
            at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:25)
            at java.lang.reflect.Method.invoke(Method.java:585)
            at org.springframework.aop.support.AopUtils.invokeJoinpointUsingReflection(AopUtils.java:307)
            at org.springframework.aop.framework.ReflectiveMethodInvocation.invokeJoinpoint(ReflectiveMethodInvocation.java:182)
            at org.springframework.aop.framework.ReflectiveMethodInvocation.proceed(ReflectiveMethodInvocation.java:149)
            at org.springframework.dao.support.PersistenceExceptionTranslationInterceptor.invoke(PersistenceExceptionTranslationInterceptor.java:138)
            at org.springframework.aop.framework.ReflectiveMethodInvocation.proceed(ReflectiveMethodInvocation.java:171)
            at org.springframework.aop.framework.JdkDynamicAopProxy.invoke(JdkDynamicAopProxy.java:204)
            at $Proxy19.getVets(Unknown Source)
            at org.springframework.samples.petclinic.web.ClinicController.vetsHandler(ClinicController.java:53)
            at sun.reflect.NativeMethodAccessorImpl.invoke0(Native Method)
            at sun.reflect.NativeMethodAccessorImpl.invoke(NativeMethodAccessorImpl.java:39)
            at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:25)
            at java.lang.reflect.Method.invoke(Method.java:585)
            at org.springframework.web.bind.annotation.support.HandlerMethodInvoker.doInvokeMethod(HandlerMethodInvoker.java:421)
            at org.springframework.web.bind.annotation.support.HandlerMethodInvoker.invokeHandlerMethod(HandlerMethodInvoker.java:136)
            at org.springframework.web.servlet.mvc.annotation.AnnotationMethodHandlerAdapter.invokeHandlerMethod(AnnotationMethodHandlerAdapter.java:326)
            at org.springframework.web.servlet.mvc.annotation.AnnotationMethodHandlerAdapter.handle(AnnotationMethodHandlerAdapter.java:313)
            at org.springframework.web.servlet.DispatcherServlet.doDispatch(DispatcherServlet.java:875)
            at org.springframework.web.servlet.DispatcherServlet.doService(DispatcherServlet.java:807)
            at org.springframework.web.servlet.FrameworkServlet.processRequest(FrameworkServlet.java:571)
            at org.springframework.web.servlet.FrameworkServlet.doGet(FrameworkServlet.java:501)
            at javax.servlet.http.HttpServlet.service(HttpServlet.java:743)
            at javax.servlet.http.HttpServlet.service(HttpServlet.java:856)
            at com.evermind.server.http.ServletRequestDispatcher.invoke(ServletRequestDispatcher.java:713)
            at com.evermind.server.http.ServletRequestDispatcher.forwardInternal(ServletRequestDispatcher.java:370)
            at com.evermind.server.http.HttpRequestHandler.doProcessRequest(HttpRequestHandler.java:871)
            at com.evermind.server.http.HttpRequestHandler.processRequest(HttpRequestHandler.java:453)
            at com.evermind.server.http.HttpRequestHandler.serveOneRequest(HttpRequestHandler.java:221)
            at com.evermind.server.http.HttpRequestHandler.run(HttpRequestHandler.java:122)
            at com.evermind.server.http.HttpRequestHandler.run(HttpRequestHandler.java:111)
            at oracle.oc4j.network.ServerSocketReadHandler$SafeRunnable.run(ServerSocketReadHandler.java:260)
            at oracle.oc4j.network.ServerSocketAcceptHandler.procClientSocket(ServerSocketAcceptHandler.java:234)
            at oracle.oc4j.network.ServerSocketAcceptHandler.access$700(ServerSocketAcceptHandler.java:29)
            at oracle.oc4j.network.ServerSocketAcceptHandler$AcceptHandlerHorse.run(ServerSocketAcceptHandler.java:879)
            at com.evermind.util.ReleasableResourcePooledExecutor$MyWorker.run(ReleasableResourcePooledExecutor.java:303)
            at java.lang.Thread.run(Thread.java:595)
    Caused by: java.sql.SQLException: Io exception: The Network Adapter could not establish the connection
            at oracle.jdbc.driver.DatabaseError.throwSqlException(DatabaseError.java:138)
            at oracle.jdbc.driver.DatabaseError.throwSqlException(DatabaseError.java:175)
            at oracle.jdbc.driver.DatabaseError.throwSqlException(DatabaseError.java:287)
            at oracle.jdbc.driver.T4CConnection.logon(T4CConnection.java:328)
            at oracle.jdbc.driver.PhysicalConnection.<init>(PhysicalConnection.java:430)
            at oracle.jdbc.driver.T4CConnection.<init>(T4CConnection.java:151)
            at oracle.jdbc.driver.T4CDriverExtension.getConnection(T4CDriverExtension.java:32)
            at oracle.jdbc.driver.OracleDriver.connect(OracleDriver.java:608)
            at oracle.jdbc.pool.OracleDataSource.getConnection(OracleDataSource.java:218)
            at oracle.jdbc.pool.OracleConnectionPoolDataSource.getPhysicalConnection(OracleConnectionPoolDataSource.java:114)
            at oracle.jdbc.pool.OracleConnectionPoolDataSource.getPooledConnection(OracleConnectionPoolDataSource.java:77)
            at oracle.jdbc.pool.OracleImplicitConnectionCache.makeCacheConnection(OracleImplicitConnectionCache.java:1361)
            at oracle.jdbc.pool.OracleImplicitConnectionCache.getCacheConnection(OracleImplicitConnectionCache.java:441)
            at oracle.jdbc.pool.OracleImplicitConnectionCache.getConnection(OracleImplicitConnectionCache.java:336)
            at oracle.jdbc.pool.OracleDataSource.getConnection(OracleDataSource.java:286)
            at oracle.jdbc.pool.OracleDataSource.getConnection(OracleDataSource.java:179)
            at oracle.jdbc.pool.OracleDataSource.getConnection(OracleDataSource.java:159)
            at oracle.oc4j.sql.DataSourceConnectionPoolDataSource.getPooledConnection(DataSourceConnectionPoolDataSource.java:57)
            at oracle.oc4j.sql.xa.EmulatedXADataSource.getXAConnection(EmulatedXADataSource.java:92)
            at oracle.oc4j.sql.spi.ManagedConnectionFactoryImpl.createXAConnection(ManagedConnectionFactoryImpl.java:211)
            at oracle.oc4j.sql.spi.ManagedConnectionFactoryImpl.createManagedConnection(ManagedConnectionFactoryImpl.java:170)
            at com.evermind.server.connector.ApplicationConnectionManager.createManagedConnection(ApplicationConnectionManager.java:1398)
            at oracle.j2ee.connector.ConnectionPoolImpl.createManagedConnectionFromFactory(ConnectionPoolImpl.java:327)
            at oracle.j2ee.connector.ConnectionPoolImpl.access$800(ConnectionPoolImpl.java:98)
            at oracle.j2ee.connector.ConnectionPoolImpl$NonePoolingScheme.getManagedConnection(ConnectionPoolImpl.java:1211)
            at oracle.j2ee.connector.ConnectionPoolImpl.getManagedConnection(ConnectionPoolImpl.java:785)
            at oracle.oc4j.sql.ConnectionPoolImpl.getManagedConnection(ConnectionPoolImpl.java:45)
            at com.evermind.server.connector.ApplicationConnectionManager.getConnectionFromPool(ApplicationConnectionManager.java:1596)
            at com.evermind.server.connector.ApplicationConnectionManager.acquireConnectionContext(ApplicationConnectionManager.java:1541)
            at com.evermind.server.connector.ApplicationConnectionManager.allocateConnection(ApplicationConnectionManager.java:1486)
            at oracle.j2ee.connector.OracleConnectionManager.unprivileged_allocateConnection(OracleConnectionManager.java:238)
            at oracle.j2ee.connector.OracleConnectionManager.allocateConnection(OracleConnectionManager.java:192)
            at oracle.oc4j.sql.ManagedDataSource.getConnection(ManagedDataSource.java:272)
            at oracle.oc4j.sql.ManagedDataSource.getConnection(ManagedDataSource.java:200)
            at oracle.oc4j.sql.ManagedDataSource.getConnection(ManagedDataSource.java:142)
            at oracle.oc4j.sql.ManagedDataSource.getConnection(ManagedDataSource.java:127)
            at oracle.toplink.essentials.jndi.JNDIConnector.connect(JNDIConnector.java:145)
            ... 60 moreAny ideas? I'd really like to see JPA, Spring and oc4j working together?
    Thanks,
    Eric

Maybe you are looking for

  • Generics in EJBs - ejbc fails in 9.0b

    I have some SLSBs with typed collections such as Map<String,String> someMethod (Collection<Integer> on); in the local interface. The bean implementation implements this signature exactly. On startup, I'm getting messages like ...\EJBCompilerCache\-kb

  • Connecting bluetooth keyboard that is used with imac to macbook

    is it possible to connect my wireless keyboard and mighty mouse to my macbook when the wireless keyboard and mouse have been paired with my imac? if not, how do i reset the keyboard and mouse to be recognized with my macbook?

  • Importing complex xml into a DataSet

    (A prolific PowerShell poster suggested I come over here....) I have a schema but it doesn't import correctly into a DataSet with the expected table names. There is more but I think if this gets solved the rest will, what am I doing wrong with the ta

  • I want to create a timeline for events which have occurred in my past life

    IT would be better if I could run several at a time for example Work Life, Personal life, health events etc I would like to tie documents, pictures etc to them I would like to be able to present the timeline in either printed or projected form or bot

  • Cisco Prime and WLC HA-SSO

    Hi All. i implemented the HA_SSO on two wlc, WLC1 Active and WLC2 Hot Stanby and the system works fine. My question reguarding the monitoring. Is Possible monitoring  to the WLC Secondary? if by chance the wlc standby should be broken as I can realiz