Any size Constraints On a variable of String Class

Hi All
I would like to know whether there are any constraints on the size of data that a variable of Class String can store.
For example i need to store data of length around 70,000 (can be more too) in a String variable.
Can i use a variable of String Class for this purpose or is there another Class which can do the work with minimum rework
Thanking in anticipation of all the replies

hi,
not sure about the internal array size( integer?)...
but as charactor occupies 2 bytes, ability to create
lengthier string is restricted only by out of memory
error...
in which case, the allowable size will be different
in different memory configurationsActually, kajbj and you are both correct. There are 2 limitations: 1 is physical memory, the other is the index of the char[] may not exceed Integer.MAX_VALUE (standard is 2,147,483,647). Depending on your physical memory, it is possible (and likely in many large systems) to run out of integers before running out of memory.

Similar Messages

Any way to assign value for variable of type Class List String ?

I'm puzzled why I can declare a variable:
Class<List<String>> clazz;but I cannot assign a value to it as
clazz = List<String>.class;The compiler also complains about
Class<List<?>> clazz0 = List<?>.class;yet it has the nerve to warn about raw types when I give up and use
Class<List> clazz0 = List.class;Even using a dummy instance does not work.
List<String> dummy = new ArrayList<String>();
Class<List<String>> clazz1 = dummy.getClass();I only care because I've declared a method like
public String useless( Class<List<String>> unSetable){
return unSetable.getName();
}And now there seems to be no way to call it.

Hello chymes,
there is no way to get an instance of Class<List<String>> without at least one unchecked warning. Otherwise you could get away with the following:
List<Integer> ints = new ArrayList<Integer>();
Class<List<String>> clazz = List<String>.class;
List<String> strings = clazz.cast(ints);
strings.add("No Good");
int i = ints.get(0); // CCETherefore the only way to get it is via unchecked cast:
Class<List<String>> clazz = (Class<List<String>>) (Object) List.class;With kind regards
Ben

ORA-01458: invalid length inside variable character string

We encountered a serious problem in production system where we were getting this ORA error.
The common search on google results into the following explaination.
Cause: An attempt was made to bind or define a variable character string with a buffer length less than the minimum requirement.
Action: Increase the buffer size or use a different type.
However on analysis we found that the error was because, the value that was being bound to bind variable was NULL.
This was a new finding for me.
Please share your experiences/views on this.

without any code and data examples this is impossible

Size of a JavaScript variable

What can be the maximum size of the javascript variable? I want to store a String into a Javascript variable.

Just playing around cuz I was curious... in IE this works, with JS and VB functions calling each other. Variables don't seem to be visible across languages though.
<HTML>
<HEAD>
<TITLE>VBScript Test Page</TITLE>
<SCRIPT LANGUAGE="VBScript">

</SCRIPT>
<SCRIPT LANGUAGE="JavaScript">

</SCRIPT>
</HEAD>
<BODY>
<INPUT TYPE=BUTTON LANGUAGE="VBScript" VALUE="with vb!" NAME="TestButton">
<HR>
<INPUT TYPE=BUTTON VALUE="with js!" onclick="doJS();">
<HR>
</BODY>
</HTML>

Do we have CSS file size constraint in PT8.52/Red Hat Enterprise Linux 5.3?

Hi All,
We are facing an issue with CSS. We able upload a css file > 16 kb of size with out any issues in the web server. But those styles are not working.
When we checked our local cache floder CSS file it is not having all styles. It looked like more than 16kb of data got truncated.
Not sure whether we have file size constraint in PT8.52/Red Hat Enterprise Linux 5.3(64 bit) os.
Is there any other way to overcome this problem?
Thanks,
Hari.A

Is it crashing (as in "the JRockit process disappears") or hanging (as
in "the JRockit process is still there, but it isn't doing anything")?
//Johan
Jayakumar Doshi skrev:
Hello All
We have an application that uses
1. JMS
2. Lots and Lots of Runtime.exec calls.
3. Lots of database query at periodic interval
4. Lots of timer events
The application runs fine for few days and that it would crash.
When we see the log files we do not see any error logs. Also no dump file is produced.
This has been happening for two weeks now, and I am clueless. Any suggestion would surely be of great help.
The server is running in Production env, we cannot change from WL 8.1 SP3, however if we want, we can upgrade the JDK version
Thanks
Jay Doshi

HOWTO: Writing Out XML Query Results of Any Size in Java with XML SQL Utility

A customer mailed me asking for an example of how to use our XML SQL Utility to write out query results for tons of query result rows.
With tons of data, the getXMLDOM() and getXMLString() methods are not really appropriate due to the size.
The XML SQL Utility offers a getXMLSAX() method that streams SAX2 events to report the data being queried. This is the approach we can use to handle data of any size.
It dawned on me today that by putting together the XML SQL Utilities getXMLSAX() routine, and the oracle.xml.parser.v2.XSLSAXPrintDriver SAX2 ContentHandler, we can effectively stream out data of any length to an appropriate writer.
Here's a code example to get the point across:
package test;
import java.io.BufferedOutputStream;
import java.io.PrintWriter;
import java.sql.Connection;
import java.sql.Driver;
import java.sql.DriverManager;
import java.sql.SQLException;
import java.util.Properties;
import javax.xml.transform.OutputKeys;
import oracle.jdbc.OracleDriver;
import oracle.xml.parser.v2.XSLException;
import oracle.xml.parser.v2.XSLOutput;
import oracle.xml.parser.v2.XSLSAXPrintDriver;
import oracle.xml.sql.query.OracleXMLQuery;
public class Example {
private static final String QUERY = "select * from emp";
public static void main(String[] args) throws Throwable {
      Connection conn = getConnection();
      OracleXMLQuery q = new OracleXMLQuery(getConnection(),QUERY);
      // Any printwriter will do. Here's we're output to standard out.
      PrintWriter output = new PrintWriter(new BufferedOutputStream(System.out));
      // This is a SAX2 Content Handler used by the Oracle XSLT Engine
      // to serialize a stream of sax2 events as an XML document
      // We'll use it to serialize the sax2 events from the XML SQL Utility
      // out as an XML document.
      XSLSAXPrintDriver ch = new XSLSAXPrintDriver(output, outputOptions());
      // This asks XML SQL Utility to fire sax events for the data
      // being fetched instead of creating DOM nodes or returning text.
      // By using the XSLSAXPrintDriver content handler, these events
      // get handled by writing them directly to the output stream
      q.getXMLSAX(ch);
      ch.flush();
      q.close();
      conn.close();
private static XSLOutput outputOptions() throws XSLException {
    XSLOutput x = new XSLOutput();
    Properties props = new Properties();
    props.put(OutputKeys.METHOD,"xml");
    props.put(OutputKeys.INDENT,"yes"); // Set to "no" for non-indented
    x.setProps(props);
    return x;
public static Connection getConnection() throws SQLException {
    String username = "scott";
    String password = "tiger";
    String thinConn = "jdbc:oracle:thin:@localhost:1521:ORCL";
    Driver d = new OracleDriver();
    return DriverManager.getConnection(thinConn,username,password);
}

Hi Uber,
This is a known issue that error occurs when running report "Count of instances of specific software registered with Add or Remove Programs" due to non-printable characters for XML. Based on internal research, the hotfix for this issue will be
included in the System Center 2012 Configuration Manager Service Pack 1.
As a workaround, you can remove the nonprintable character populated into the report parameter by referring to the following KB article:
http://support.microsoft.com/KB/914159
Hope this helps.
Regards,
Mike Yin
Mike Yin
TechNet Community Support

How to know pro-grammatically variable type(string ,numeric ....) of TestStand variable using CVI

Hi,
how to know pro-grammatically variable type(string ,numeric ....) of TestStand variable using Labwindows CVI.
Thanks
Mukesh Kumar

Mukesh,
You could use the TS_PropertyGetType() function in CVI to do this. Here is a reference page for the GetType function--you can see that it returns a PropertyValueType which will indicate which type the PropertyObject (variable) is. In CVI, you'll find this function in the NI TestStand API 2013 instrument methods, under PropertyObject > Static Properties.
Hope it helps, and let us know if you have any more questions about it!
Daniel E.
TestStand Product Support Engineer
National Instruments

To check whether there is any size mismatch between columns of two tables

Hi,
Here i got two tables T and M where i am going to migrate data from T to M. But before migrating i need to check whether all the data in source table fits into destination table columns. The datatypes of all columns in source table T is of Varchar2 only as it is a temp table.
Ex :- Table 'T' (Source table) with columns
T_Lat Varchar2(50);
T_Amt Varchar2(50);
T_Cat Varchar2(50);
T_Vat Varchar2(50);
Now I have another table 'M'(Destination Table) with columns
M_Lat Varchar2(50);
M_Amt varchar2(25);
M_Cat date;
M_Vat number;
Now my task is I have to do a prevalidation of the data in 'T' that whether all the data in those columns will suit for the destination table columns respectively (to check whether there is any size mismatch). This check should be done dynamically.
For suppose, in T_Amt(source column of T table) if text is abt 50 characters, it cant fit M_Amt(destination column of M table). In this case it should throw an error indicating that destination column size is less for the source column.
Note:- There is no unique mapping column for these two tables and there are about 400 columns in the source table to be validate
I think it can be done using arrays or plsql tables.
Can any one help in this regard.

>
Now my task is I have to do a prevalidation of the data in 'T' that whether all the data in those columns will suit for the destination table columns respectively (to check whether there is any size mismatch). This check should be done dynamically.
>
Just because the source table T_Amt column is defined as 50 doesn't mean any of the data is really that long. So the data itself needs to be checked. That is just what a simple query can do.
See my answer in this thread Posted: Jul 25, 2012 1:14 PM
Re: Help in Execute Immediate - Invalid relational Operator
Here is the modified sample query and results for a query of a clone of the EMP table with some modified data
select count(*) cnt,
       -- job column
       sum(case when job is null then 1 else 0 end) job_nul,
       sum(case when job = 'SALESMAN' then 1 else 0 end) job_salesman,
       min(length(job)) job_minlength, max(length(job)) job_maxlength,
       min(job) job_min, max(job) job_max,
       -- hiredate colulmn
       sum(case when hiredate is null then 1 else 0 end) hiredate_nul,
       min(hiredate) hiredate_min,
       max(hiredate) hiredate_max
        from emp1
CNT JOB_NUL JOB_SALESMAN JOB_MINLENGTH JOB_MAXLENGTH JOB_MIN JOB_MAX HIREDATE_NUL HIREDATE_MIN HIREDATE_MAX
14    2       4            5             9             ANALYST SALESMAN 0            9/28/0001    12/3/9999With one query and ONE pass thru the table I was able to get the COUNTs, the MIN and MAX values for each column and the MIN and MAX lengths of the VARCHAR2 columns.
There are 14 total records, 2 where JOB is null, 4 where the JOB is SALESMAN. The MIN length of the JOB data is 5 and the MAX is 9.
Look at the date values. The results tell me I have some problem data.
The length data tells me if I try to put the JOB data into another table I need to define the length as at least 9 or it won't fit.
For your use case you might find that all of the data in the T_Lat column is shorter than 26 and will actually fit into the M_Lat target table column.

The MAC signature found in the HTTP request '***' is not the same as any computed signature. Server used following string to sign: 'POST

Hi,
When trying with Postman sending a REST call to Azure Storage Queues I get:
The MAC signature found in the HTTP request '***' is not the same as any computed signature. Server used following string to sign: 'POST.
The code I have for creating the Authorization Header:
var accountName = "my_account";
string key = ConfigurationManager.AppSettings["my_access_key"];
DateTime dt = DateTime.Now;
string formattedDate = String.Format("{0:r}", dt);
var canonicalizedHeaders = "x-ms-date:" + formattedDate + "\n" + "x-ms-version:2009-09-19" + "\n" ;
var canonicalizedResource = "/my_account/myqueue/messages";
var stringToSign = String.Format("POST,\n\n\n\n\n\n\n\n\n\n\n{0}{1}", canonicalizedHeaders, canonicalizedResource);
stringToSign = HttpUtility.UrlEncode(stringToSign);
HMACSHA256 hmac = new HMACSHA256(Encoding.UTF8.GetBytes(key));
var signature = Convert.ToBase64String(hmac.ComputeHash(Encoding.UTF8.GetBytes(stringToSign)));
var authorizationHeader = String.Format(CultureInfo.InvariantCulture, "SharedKey {0}:{1}", accountName, signature);
return authorizationHeader;
Anyone any idea what I'm missing/doing wrong?
Additional question: do i have to create for every message I want to send a new Authorization header? Or is there an option (as with Service Bus Topics) to create a header that can be used for a certain timeframe?
Thanks.

One issue is with this line of code:
HMACSHA256 hmac = new HMACSHA256(Encoding.UTF8.GetBytes(key));
Please use the following:
HMACSHA256 hmac = new HMACSHA256(Convert.FromBase64String(key));
and that should take care of the problem.
Regarding your question, "do i have to create for every message I want to send a new Authorization header? Or is there an option (as with Service Bus Topics) to create a header that can be used for a certain timeframe?"
With your current approach, the answer is yes. What you can do is create a Shared Access Signature on the queue which will be valid for certain duration and then use that for posting messages to a queue using simple HttpWebRequest/HttpWebResponse.
Hope this helps.

I would like to do a program that have one string control and one string indicator, any character that I type in the string control in the same time it will be appear in another string (indicator). How can help me?

I would like to do a program that have one string control and one string indicator, any character that I type in the string control in the same time it will be appear in another string (indicator). How can help me?

Why not use an event
Add a While Loop, inside the loop add the Event Sructure.
Now in the event structure selecd the String Controls.value change event to
react
and the new value inside the event that you get,( connect to the String
indicator box.
On Sun, 10 Aug 2003 15:58:47 -0500 (CDT), WiltonFilho wrote:
> I would like to do a program that have one string control and one
> string indicator, any character that I type in the string control in
> the same time it will be appear in another string (indicator). How can
> help me?
>
> I would like to do a program that have one string control and one
> string indicator, any character that I type in the string control in
> the same time it will be appear in another string (indicator). How can
> help me?
>
Using M2, Opera's revolutionary e-mail client: http://www.opera.com/m2/

How to convert a "text variable" to String with plugin

Hello,
I am currently developing a InDesign (CS5) plugin, where I need to manipulate text variable.
From the plugin I want to convert the "text variable" to string (in principle I should use the method "VariableToString (..)" of "ITextVariable")"
My problem is, how to find the text varial from its name (I think I should use the method "FindLocationsUsed(..)" of "ITextVariableSuite") and then convert it to String
I don't know how to use interfaces ITextVariable and ITextVariableSuite
Plugin implemented in C++ language
thank you

     InputStreamReader in=new InputStreamReader(fis);
      StringWriter out=new StringWriter();
      char[] buffer=new char[8192];
      int sizeRead;
      while ( ( sizeRead=in.read(buffer, 0, 8192) ) != -1 )
        out.write(buffer, 0, sizeRead);
     String content=out.toString();

Is there any size limit for this DB?

Hi,
We have installed SQL Express 2012 DB and configured as a results store for the VSTS 2012 load tests.
Do we have the size restriction of 4 GB to this DB as well? or we dont have any size restriction for this DB?
Thanks in advance.
Regards,
Y.S.Sridhar

Hi
Express maximum db size limit is 10gb
http://msdn.microsoft.com/en-us/library/cc645993(v=SQL.110).aspx
vt
Please mark answered if I've answered your question and vote for it as helpful to help other user's find a solution quicker

How to convert an int variable into String type

hi everybody
i want to know how to convert an interger variable into string variable
i have to implement a code which goes like this
Chioce ch;
for(int i=0;i<32;i++)
// here i need a code to convert the int variable i into a string variable
ch.add(String variable);
how do i convert that int variable i into a String type variable??
can anyone help me?

Different methods:
int a;
string s=a+"";or
String.valueOf(int) is the better option because Int.toString() generated an intermediate object to get the endresult
Ema

Constraints for presentation variable in obiee 10g

Hello Guys,
What are the constraints for presentation variable in obiee 10g?
requirement: I am unable to find the variable option, when i selects CONTAINS operatior, during creating the prompt.

Hi,
In 10g, a dashboard prompt can only set presentation variables when you use the "is equal to/is in" operator. Also, it is not available in case of MultiSelect prompt.
Refer to the below thread for some alternate solutions:
visualize prompt values into report Answer?
Thanks

Is there any size or file count restriction in iTunes "choose photos to share" ?

Hi, is there any size or file count restriction in iTunes "choose photos to share" ? Thanks,

No.

Any size Constraints On a variable of String Class

Similar Messages

Maybe you are looking for