Any suggestions, or fixes, as to why I have to rebuild my library after EVERY shutdown? I am running the latest 10.6, 2.92 ghz iMac core 2 duo, with 4gb ram.
Any suggestions, or fixes, as to why I have to rebuild my library after EVERY shutdown? I am running the latest 10.6, 2.92 ghz iMac core 2 duo, with 4gb ram. Install went well, as far as I know. No other problems. I fear, that unless I fix this, when I upgrade to a new computer, I will be taking the same problem with me.
So if you start Aperture do some stuff in it, quit, then open Aperture again it starts up OK but if you then quit Aperture, reboot your machine and start Aperture it stalls?
You're internal drive is getting close to being overfull your at about what 18.5% free space (some we'll say it's already overfull). You might what to think about freeing up space. If you weren't having any troubles I'd say it was fine but as you are experiencing problems it is something to look at.
While its been doing the processing have you been able to open the activity window in Aperture? If you click on the spinnig gear (not the beachball) when Aperture is busy you can usually get the activity window to open.
Other then that not sure what else to recommend at this point.
Similar Messages
-
Why, Mozilla, have you released version 3.6.6 when, on your website, the latest beta is listed as 3.6.4b7? I wanna beta test...
The 3.6.6 release was pushed out so fast that there wasn't a Firefox 3.6.6 Beta version for testing. All the testing of 3.6.6 was done in the Namoraka-pre nightly versions.
-
Why is my iMac (2.8.GHz Intel Core i7 w/ 4GBs RAM) using so much RAM?
Right now I have only Firefox open with 4 tabs. Firefox only has 1 extension (1Password). No other application open or running (that I know of). My dock has 17 icons (including basics like trash, finder, launch, etc). As mentioned I have a:
2.8 GHz
Intel Core i7
4 GBs RAM
21.5 Inch
Running on 10.7.3 (Lion)
My RAM situation is this:
1.83 GB Free
78 MB Inactive
1.40 GB Active
697 MB Wired
2.17 GB Used
4.0 GB Total
Image of my Activity Monitor (with user removed) here:
columns as follows: PID, Process Name, % CPU, Threads, Real Mem, Kind
I'm trying to figure out why my iMac is using so much RAM when I only have Firefox open? are any of these activities unnecessary and if so how might I turn them off and so they don't start automatically when I initially turn on the computer? This imac is two weeks old and so I haven't done a whole lot of customization yet. Please help if you can. Really appreciate it. Trying to optimize this baby. Thank you!!Here's mine: I have 16 Safari tabs open, some with Flash junk, and 13 apps "open" according to the Dock indicator:
By the way the number of icons in your Dock has essentially no effect on memory. Only running apps - the ones with the little dot indicator - might be occupying memory. Even that is somewhat of an oversimplification, since "active" apps may or may not have any active processes associated with them. It's all a function of how Lion manages its memory resources, and that is a whole new world to most of us.
With Lion, Apple is seeking to eliminate the system effects of whether an app is even open or not. Just another trivial detail the average user ought not to be concerned with, in their opinion.
If you want a cursory introduction to that fascinating subject, Google the Ars Technica Lion review that was written a few months ago. It may ease your concerns about memory management. If you are an experienced computer user, it will rock your world. -
My camera does not work on my macbook, any suggestions to fix it?
my camera does not work on my macbook, any suggestions to fix it?
Here are Applle's troubleshooting steps....
support.apple.com/kb/HT2090 -
I used Roxio VHS to DVD for Mac (have iMac with Snow Leopard) and the audio does not synch with the video when playing in iMovie. Any suggestions to fix?
Thanks for the reply. I tried playing with detaching the audio in iMovie, but with 20+ hours of video to correct, it would take too long. After 28 hours, Corel/Roxio tech support replied that it is a known bitrate mismatch problem and they have no real fix. I strongly suggest not to buy this product.
-
HT201412 App goes black screen upon loading, any suggestions to fix this?
I have just encountered a problem when trying to load an app on my iPhone 4, the screen just goes black upon launch and stays black, any suggestions to fix this fault?
Hello Scooter190379
Start your troubleshooting with the steps in the article below.
iOS: Troubleshooting apps purchased from the App Store
http://support.apple.com/kb/ts1702
Regards,
-Norm G. -
I just updated my 3gs to the latest iOS 5 update and now I am unable to text certain numbers. I keep getting the error code 1121611611 invalid number, even though the number I have in my contacts is a 10 digit number. Any suggestions on fixing this?
PhotogYogi wrote:
I Have the same issue on a brand new iPad mini 2. My battery is only lasting up to 5 hours. I went on chat with Apple last night and they said my battery is fine and its a Safari issue. I'm literally losing 1% every 3-4 minutes. I tried recalibrating my battery, signing out of iCloud, shutting off all locations, turning off background app refresh, restoring network settings, restoring all, and finally restoring from iTunes with no luck. This is just awful. I got this iPad so I could use it on my long flight for a trip I have coming up, and unfortunately, it's not going to last that long, plus I'm concerned about how many times i will be recharging my battery because of this since battery's do have a life cycle dependent on the number of charges. This is frustrating and needs to be fixed ASAP and addressed by Apple.
By the way, Apple told me to bring my device to the Apple Store because it's still under warranty. That's great and all, but I'm going to waste my time if there is no fix for this issue.
Ok so you want Apple to address the problem, but yet you don't want to take it to them just in case they can't fix it? What if they can fix it? Complaining here certainly won't fix it. -
i have tried to restore my iPad from my computer, but it stops ones it gets to the stage where it is updating the firmware. It will then display " there was an unknown error.....Any suggestion to fix this,?
Temporarily disable antivirus and firewall on computer.
-
Apple Mail with OSX 10.9.5 quits on launch when mail window opens. May be related to install of Security update 2014-005. Any suggestions on fixing this?
Here is the beginning of the Problem details error message:
Process:
Mail [763]
Path:
/Applications/Mail.app/Contents/MacOS/Mail
Identifier:
com.apple.mail
Version:
7.3 (1878.6)
Build Info:
Mail-1878006000000000~1
Code Type:
X86-64 (Native)
Parent Process: launchd [264]
Responsible:
Mail [763]
User ID:
501
Date/Time:
2014-10-20 15:23:32.902 -0800
OS Version:
Mac OS X 10.9.5 (13F34)
Report Version: 11
Anonymous UUID: 1058C7CE-141A-982C-2F1D-4F0EB47F37A1
Crashed Thread: 10 Dispatch queue: NSOperationQueue Serial Queue
Exception Type: EXC_CRASH (SIGABRT)
Exception Codes: 0x0000000000000000, 0x0000000000000000
Application Specific Information:
*** Terminating app due to uncaught exception 'NSInvalidArgumentException', reason: '-[NSKeyPathExpression objectForKey:]: unrecognized selector sent to instance 0x60000045ff20'
abort() called
terminating with uncaught exception of type NSExceptionTry a restart.
Do a backup, using either Time Machine or a cloning program, to ensure files/data can be recovered. Two backups are better than one.
Try setting up another admin user account to see if the same problem continues. If Back-to-My Mac is selected in System Preferences, the Guest account will not work. The intent is to see if it is specific to one account or a system wide problem. This account can be deleted later.
Isolating an issue by using another user account
Try booting into the Safe Mode using your normal account. Disconnect all peripherals except those needed for the test. Shut down the computer and then power it back up after waiting 10 seconds. Immediately after hearing the startup chime, hold down the shift key and continue to hold it until the gray Apple icon and a progress bar appear and again when you log in. The boot up is significantly slower than normal. This will reset some caches, forces a directory check, and disables all startup and login items, among other things. When you reboot normally, the initial reboot may be slower than normal. If the system operates normally, there may be 3rd party applications which are causing a problem. Try deleting/disabling the third party applications after a restart by using the application un-installer. For each disable/delete, you will need to restart if you don’t do them all at once.
Safe Mode - Mavericks
Safe Mode - About -
All of a sudden I am getting TONS of pop up ads. I am on a Macbook Pro running OSX 10.5.8. Anyone have any suggestions for fixing the problem?
Take a look at my Adware Removal Guide.
(Fair disclosure: The Safe Mac is my site, and contains a Donate button, so I may receive compensation for providing links to The Safe Mac. Donations are not required.) -
TS3694 any suggestions for fixing "unknown error 3194"?
any suggestions for fixing "unknown error 3194"?
i updated the phone through itunes but got the message above. I am trying to recover my contact information, which is most important to me (all business contacts are on this phone). The phone will not turn on. I have tried resetting the phone with the home/power button, the phone is fully charged as well. Any ideas will be greatly appreciated.
thank you!The 3194 update/restore error usually means the computer can't connect to gs.apple.com.
See this Apple doc -> iTunes: Specific update-and-restore error messages and advanced troubleshooting
Unable to contact the iOS software update server gs.apple.com
Error 1004, 1013, 1638, 3194: These errors may be the result of the connection to gs.apple.com being redirected or blocked. Follow these steps to resolve these errors:
Install the latest version of iTunes.
Check security software. Ensure that communication to gs.apple.com is allowed. Follow this article for assistance with security software. iTunes for Windows: Troubleshooting security software issues.
Check the hosts file. The restore will fail if there is an active entry to redirect gs.apple.com. Follow iTunes: Advanced iTunes Store troubleshooting to edit the hosts file or revert to a default hosts file. See section "Blocked by configuration: (Mac OS X/Windows) > Rebuild network information".
Try to restore from another known-good computer and network.
If the errors persist on another computer, the device may need service.
If you just want to get the contacts back, and they are on the computer, you can just sync them from iTunes again. -
I attempted to download iTunes match w/o success. Step 1 was fine. Step 2 gets stalled and will not move beyond 80%... Any suggestions for a solution? Why is iTunes stalling on step 2?
Hi folks,
I found a solution in case your MATCH is still buggy...
JUST BOOT YOUR MAC HOLDING THE SHIFT KEY (until you see a progress bar).
Then in itunes disable and re-enable iTunes Match.
It should rescan all your library and eventually works.
At the end just reboot your Mac normally.
Best regards from Paris.
Nico -
My computer is functioning really slowly since downloading Mavericks. My programs lag opening if at all. Any suggestions for fixing this?
I installed it maybe 2 weeks ago, Here are my results:
Hardware Information:
MacBook (13-inch, Late 2009)
MacBook - model: MacBook6,1
1 2.26 GHz Intel Core 2 Duo CPU: 2 cores
2 GB RAM
Video Information:
NVIDIA GeForce 9400M - VRAM: 256 MB
System Software:
OS X 10.9.2 (13C1021) - Uptime: 0 days 22:44:15
Disk Information:
TOSHIBA MK2555GSXF disk0 : (250.06 GB)
EFI (disk0s1) <not mounted>: 209.7 MB
Marshmallow (disk0s2) / [Startup]: 249.2 GB (125.02 GB free)
Recovery HD (disk0s3) <not mounted>: 650 MB
MATSHITADVD-R UJ-898
USB Information:
Apple Inc. Built-in iSight
Apple Inc. Apple Internal Keyboard / Trackpad
Logitech USB Receiver
Apple Inc. BRCM2070 Hub
Apple Inc. Bluetooth USB Host Controller
Thunderbolt Information:
Gatekeeper:
Mac App Store and identified developers
Kernel Extensions:
[kext loaded] at.obdev.nke.LittleSnitch (4052 - SDK 10.8) Support
[not loaded] com.devguru.driver.SamsungACMControl (1.4.14 - SDK 10.6) Support
[not loaded] com.devguru.driver.SamsungACMData (1.4.14 - SDK 10.6) Support
[not loaded] com.devguru.driver.SamsungComposite (1.4.14 - SDK 10.6) Support
[not loaded] com.devguru.driver.SamsungMTP (1.4.14 - SDK 10.5) Support
[not loaded] com.devguru.driver.SamsungSerial (1.4.14 - SDK 10.6) Support
[not loaded] com.mobile-stream.driver.EasyTetherUSBEthernet (1.0.4 - SDK 10.4) Support
[not loaded] com.motorola-mobility.driver.MotMobileMS (1.0.0 - SDK 10.5) Support
[not loaded] com.motorola-mobility.driver.MotMobileMTP (1.2.2 - SDK 10.5) Support
[not loaded] com.motorola-mobility.driver.MotMobileUSB (1.2.2 - SDK 10.5) Support
[not loaded] com.motorola-mobility.driver.MotMobileUSBLAN (1.2.2 - SDK 10.5) Support
[not loaded] com.motorola-mobility.driver.MotMobileUSBLANMerge (1.2.2 - SDK 10.5) Support
[not loaded] com.motorola-mobility.driver.MotMobileUSBSwch (1.2.2 - SDK 10.5) Support
Launch Daemons:
[running] at.obdev.littlesnitchd.plist Support
[running] com.adobe.ARM.[...].plist Support
[loaded] com.adobe.fpsaud.plist Support
[loaded] com.adobe.versioncueCS4.plist Support
[running] com.autodesk.backburner_manager.plist Support
[running] com.autodesk.backburner_server.plist Support
[failed] com.autodesk.backburner_start.plist Support
[loaded] com.google.keystone.daemon.plist Support
[running] com.motorola-mobility.mmcfgd.plist Support
Launch Agents:
[running] at.obdev.LittleSnitchUIAgent.plist Support
[loaded] com.adobe.CS4ServiceManager.plist Support
[running] com.Affinegy.InstaLANa.plist Support
[loaded] com.google.keystone.agent.plist Support
[loaded] com.motorola.MDMUpdater.plist Support
[running] com.motorola.motohelper.plist Support
[loaded] com.motorola.motohelperUpdater.plist Support
User Launch Agents:
[loaded] com.adobe.ARM.[...].plist Support
[loaded] com.adobe.ARM.[...].plist Support
[running] com.akamai.single-user-client.plist Support
User Login Items:
iTunesHelper
Skype
Dropbox
Android File Transfer Agent
GrowlHelperApp
TWC-WiFi Menu
KiesViaWiFiAgent
KiesViaWiFiAgent
fuspredownloader
Internet Plug-ins:
o1dbrowserplugin: Version: 5.3.1.18536 Support
Default Browser: Version: 537 - SDK 10.9
AdobePDFViewerNPAPI: Version: 11.0.02 - SDK 10.6 Support
FlashPlayer-10.6: Version: 13.0.0.206 - SDK 10.6 Support
DivXBrowserPlugin: Version: 2.1 Support
Silverlight: Version: 5.1.20913.0 - SDK 10.6 Support
Flash Player: Version: 13.0.0.206 - SDK 10.6 Support
QuickTime Plugin: Version: 7.7.3
googletalkbrowserplugin: Version: 5.3.1.18536 Support
iPhotoPhotocast: Version: 7.0
AdobePDFViewer: Version: 11.0.02 - SDK 10.6 Support
CouponPrinter-FireFox_v2: Version: Version 1.1.6 Support
JavaAppletPlugin: Version: 14.9.0 - SDK 10.7 Check version
Safari Extensions:
DivX HiQ: Version: 2.1.1.94
DivX Plus Web Player HTML5 <video>: Version: 2.1.1.94
Audio Plug-ins:
BluetoothAudioPlugIn: Version: 1.0 - SDK 10.9
AirPlay: Version: 2.0 - SDK 10.9
AppleAVBAudio: Version: 203.2 - SDK 10.9
iSightAudio: Version: 7.7.3 - SDK 10.9
iTunes Plug-ins:
Quartz Composer Visualizer: Version: 1.4 - SDK 10.9
User Internet Plug-ins:
fbplugin_1_0_3: Version: (null) Support
3rd Party Preference Panes:
Adobe Version Cue CS4 Support
Akamai NetSession Preferences Support
Flash Player Support
Growl Support
Time Machine:
Skip System Files: NO
Auto backup: YES
Volumes being backed up:
Marshmallow: Disk size: 232.09 GB Disk used: 115.65 GB
Destinations:
Patrice [Local] (Last used)
Total size: 465.44 GB
Total number of backups: 42
Oldest backup: 2012-07-09 21:31:08 +0000
Last backup: 2014-04-28 23:46:05 +0000
Size of backup disk: Adequate
Backup size 465.44 GB > (Disk used 115.65 GB X 3)
Time Machine details may not be accurate.
All volumes being backed up may not be listed.
Top Processes by CPU:
5% WindowServer
3% plugin-container
1% firefox
0% ps
0% Dropbox
Top Processes by Memory:
381 MB firefox
86 MB plugin-container
51 MB Finder
39 MB WindowServer
33 MB softwareupdated
Virtual Memory Information:
30 MB Free RAM
548 MB Active RAM
523 MB Inactive RAM
363 MB Wired RAM
1.04 GB Page-ins
151 MB Page-outs -
My itunes radio rebuffers every 8 seconds - is there any fix or help for this problem. I am running the latest itunes on a new Mac with 4MB download speed.
You need to update your Mac OS to at least 10.5.8.
Itunes 10+ requires Mac OS 10.5.8+ -
I have Windows 8.1 on my PC. Ever since downloading the latest version of i Tunes, it will not recognize any of my i Pods (3) and therefore am unable to sync any music from my i Tunes to the i Pods. I've tried all the obvious things like resarting the PC as well as the i Pods tried different patch cables but the i Tunes software will no longer recognize my i Pods. I have automatic sync selected, but I even tried to manually sync by clicking on devices under File but the sync icon is "grayed" out. When I look under Preferences and click on devices the serial numbers of my i Pods appear and are correct but again will not recognize the i Pod when plugged in to the PC. Bottom line I'm dead in the water....appreciate any suggestions....thanks
Hi 78causeway,
Thanks for visiting Apple Support Communities.
I recommend going through the troubleshooting steps in this article if your iPhone is not recognized by iTunes for Windows:
iOS: Device not recognized in iTunes for Windows
http://support.apple.com/kb/TS1538
Best,
Jeremy
Maybe you are looking for
-
Create Form from previous form output?
Hi all, I have problem when I try to do this since I am pretty new with Jdev and ADF. If anyone has any suggestion or guide will be appreciated. I have two forms on a page. Form 1 take in user input (integer) and return an array of String. Form 2 tak
-
I'm having problems downloading 9i software
I need some help... I'm trying to download 9i database software for a class I'm taking. However, when I try to download the zip file an error is encountered. Also, I've registered and have not received a registration key. Can someone help me????
-
WRT160N and intermittent internet connections (even wired!!!)
I just purchased and installed the LinkSys WRT160N router to replace an older Netgear wireless 'G' router. The reason for the replacement / upgrade was simply to have the wireless signal reach the rest of my house. We do not have any 'N' receivers/a
-
How to turn on CR Parameter on OnDemand ?
Hi, I use personal Editor version of OnDemand, after I post a Crystal Report , I couldn't open the parameter form . does anybody knows how to open parameter ? Thanks
-
How to use DBMS_JOB to run the OWB scripts?
Can anyone pls explain how I can use the DBMS_JOB to run the scripts which are generated by OWB. Suroop