ANy thing special for Streams configuration in RAC?

We are going to configure streams in a 2 node RAC environment.
when the node goes down on which CAPTURE or APPLY or PROPAGATE runs, does it automatically failover to available to node? What kind of extra configuration should be taken care specifically for RAC to handle this scenario?

I do run Streams on RAC and on non-RAC. Only thing that changes is that the node that processes the Streams is determined by the queue table node ownership and remember that v$ views will be empty on the node where the streams are not running.

Similar Messages

Does anybody know any recorder application for streaming voice recorder for vocal talkbacks?

Dear all,
I am urgently looking for any software application recorder
to implement in a Web portal for recording streaming voice
talkbacks. I need both the product and its API / configuration
required in order to implement and integrate it into Web based
portal.
Thank you in advance.

Hi and welcome to the forums yogadad!
A couple of places for you to visit: Blackberry 101 Tips & Tricks
Sounds like you need to reload the OS on your device.
Get a good backup of your device: BB device backup (I keep all my backups in a separate folder created for that purpose so they are always in one place and easy to find.)
2. Download the most recent version of device software for your carrier: Downloading BB device software
3. Reinstall the device software: Clean reload of device software
4. Pull the battery out with the device ON. Wait about a minute and put the battery back in. Let the BB completely restart.
5. Once you have the device OS successfully installed you will then need to reinstall any 3rd party apps you currently have on your device: Install applications using the app loader tool
6. Complete another battery pull routine after each 3rd party app installation to reclaim memory and refresh your BB.
Let us know how your are doing and if you have any questions/issues; search in the forum for your BB model (search box at top right of page) Can't find what you're looking for? Start your own thread. Other users will be there to help.
Just be sure to keep coming back. Happy to have you here!
IrwinII
Please remember to "Accept as Solution" the post which solved your thread. If I or someone else have helped you, please tell us you "Like" what we had to say at the bottom right of the post.

Is there any best practice for printer configuration for test environment?

My Oracle ebs test environment has a scheduled refresh period where it will be refreshed with production test data and configuration time to time for BA, Dev to work on their enhancement.
However, all the printer configurations are still pointing to production ones after refreshed, which means whenever there is a testing on-going, the doc / label / invoices will be printed to production printer.
May I know if there is a way to globally change all the printer setup for the test environment, so that nothing will be directly to production?... Please assist.
(currently, the only way is to change one by one and only if you are aware of it...)
In case your organization has any other strategy on this matter, pls share also... Thanks a lot.

user6775047 wrote:
My Oracle ebs test environment has a scheduled refresh period where it will be refreshed with production test data and configuration time to time for BA, Dev to work on their enhancement.
However, all the printer configurations are still pointing to production ones after refreshed, which means whenever there is a testing on-going, the doc / label / invoices will be printed to production printer.
May I know if there is a way to globally change all the printer setup for the test environment, so that nothing will be directly to production?... Please assist.
(currently, the only way is to change one by one and only if you are aware of it...)
In case your organization has any other strategy on this matter, pls share also... Thanks a lot.If you do not want to use same printers then you have to it to point to the (TEST/BA Printers) after you are done with Rapid Clone. Any new printers need to be added manually (just the same way you defined you PROD printers) -- Rapid Clone Documentation Resources For Release 11i and 12 [ID 799735.1]
If you want to edit the configuration, you could use FNDLOAD to download printers definition from the source instance, update the ldt file and use FNDLOAD to upload printers definitions.
Is It Possible To Download/Upload Printer Definitions Using Fndload [ID 432616.1]
Tips About FNDLOAD [ID 735338.1]
Thanks,
Hussein

Is there any 64bit firmware for stream 8 tablet

Is there any 64bit version of the UEFI firmware on the 5801TW? http://support.hp.com/gb-en/drivers/selfservice/HP-Stream-Tablets/7439999/model/7579315#Z7_3054ICK0KGTE30AQO5O3KA30R1 The issue is that most linux install disk only supports 64bit UEFI mode. But for some unknown reason, the firmware in this tablet is 32bit. If not, is there anyway to get the message across to the support team to help support this? Or at the very least include legacy bios mode.

Nope not happenig.
The 5800 already has got so many updates.
IF YOU FIND POSTS HELPFUL HIT THE BIG GREEN BOX TO THE LEFT WITH THE WHITE STAR IN IT THANKS

[svn] 4637: Update config testsuite on blazeds/ trunk to run mxunit tests for a configuration if there are any mxunit tests found in the configuration test directory .

Revision: 4637
Author: [email protected]
Date: 2009-01-23 04:40:16 -0800 (Fri, 23 Jan 2009)
Log Message:
Update config testsuite on blazeds/trunk to run mxunit tests for a configuration if there are any mxunit tests found in the configuration test directory. Change some things around in the mxunit build.xml to make this possible, mainly allow things like test directory, reports directory etc. to be passed in as ant properties.
Add browserServer.jar to the qa-regress-sdk.zip file used for regression runs.
Update blazeds/trunk to use the latest qa-frameworks.zip.
Checkintests: passed
Modified Paths:
blazeds/trunk/qa/apps/qa-regress/build.xml
blazeds/trunk/qa/apps/qa-regress/testsuites/config/build.xml
blazeds/trunk/qa/apps/qa-regress/testsuites/mxunit/build.xml
blazeds/trunk/qa/resources/frameworks/qa-frameworks.zip

Just checked but could only find this thread Unable to run ADFBC JUNIT Test Classes with JDEV11G 11.1.1.6
As it's also dealing with junit and 11.1.1.6.0 you might want to read it.
Timo

Oracle RAC new feature for interconnect configuration HAIP vs BONDING

Hi All:
I would like to get some opinion about using Oracle HAIP (High Avalibilty IP) for configuring the RAC interconnect vs using network interface bonding.
This seems to be a new feature for Oracle GI from 11.2.0.2 and later. Have anyone had any experience for using HAIP and any issues?
Thanks

Hi
Multiple private network adapters can be defined either during the installation phase or afterward using the oifcfg.Grid Infrastructure can activate a maximum of four private network adapters at a time. With HAIP, by default, interconnect traffic will be load balanced across all active interconnect interfaces, and corresponding HAIP address will be failed over transparently to other adapters if one fails or becomes non-communicative.
it is quite helpful in following scenarios
1) if one private network adapterrs fails, virtual private IP on that adapter would be relocated to healthy adapter.
There is very good document on Metalink ( Doc ID - 1210883.1)
Rgds
Harvinder

How can i get a comedy, Dutch Treat or/and its companion Detective School Dropouts released in 1987 be included in the iTunes US store for me to down load. i will pay any thing to download them.

I wish to request that a comedy, Dutch Treat or/and its companion Detective School Dropouts released in 1987 be included in the iTunes US store for me to down load. i will pay any thing to download them.

You can try requesting it via this page (these are user-to-user forums) : http://www.apple.com/feedback/itunes.html
But unless the the US rights-holder passes it to Apple and allows them to sell it in the US then Apple won't be able to sell it there

Configuring udev rules for Oracle 10g R2 Rac on OEL 5.5 U4 with Qnap

I'm trying to setup a 10g RAC Cluster following the guide by Jeff Hunter on http://www.idevelopment.info/
I have to admit, im no Linux admin, and have searched round the net for help with the following Issue.
I'm trying to set my iSCSI targets to have persistent mappings using udev rules
This is what I have done so far
[root@racnode1 Server]# iscsiadm -m discovery -t sendtargets -p nas-priv | grep 192.168.2.196
192.168.2.196:3260,1 iqn.2004-04.com.qnap:ts-459:iscsi.racdbvote1.c59a2d
192.168.2.196:3260,1 iqn.2004-04.com.qnap:ts-459:iscsi.racdbfra2.c59a2d
192.168.2.196:3260,1 iqn.2004-04.com.qnap:ts-459:iscsi.racdbdata2.c59a2d
192.168.2.196:3260,1 iqn.2004-04.com.qnap:ts-459:iscsi.racdbvote2.c59a2d
192.168.2.196:3260,1 iqn.2004-04.com.qnap:ts-459:iscsi.racdbcrs2.c59a2d
192.168.2.196:3260,1 iqn.2004-04.com.qnap:ts-459:iscsi.racdbcrs1.c59a2d
192.168.2.196:3260,1 iqn.2004-04.com.qnap:ts-459:iscsi.racdbdata1.c59a2d
192.168.2.196:3260,1 iqn.2004-04.com.qnap:ts-459:iscsi.racdbvote3.c59a2d
192.168.2.196:3260,1 iqn.2004-04.com.qnap:ts-459:iscsi.racdbfra1.c59a2d
-- Manually Log into iSCSI Targets
iscsiadm -m node -T iqn.2004-04.com.qnap:ts-459:iscsi.racdbvote1.c59a2d -p 192.168.2.196 -l
iscsiadm -m node -T iqn.2004-04.com.qnap:ts-459:iscsi.racdbfra2.c59a2d -p 192.168.2.196 -l
iscsiadm -m node -T iqn.2004-04.com.qnap:ts-459:iscsi.racdbdata2.c59a2d -p 192.168.2.196 -l
iscsiadm -m node -T iqn.2004-04.com.qnap:ts-459:iscsi.racdbvote2.c59a2d -p 192.168.2.196 -l
iscsiadm -m node -T iqn.2004-04.com.qnap:ts-459:iscsi.racdbcrs2.c59a2d -p 192.168.2.196 -l
iscsiadm -m node -T iqn.2004-04.com.qnap:ts-459:iscsi.racdbcrs1.c59a2d -p 192.168.2.196 -l
iscsiadm -m node -T iqn.2004-04.com.qnap:ts-459:iscsi.racdbdata1.c59a2d -p 192.168.2.196 -l
iscsiadm -m node -T iqn.2004-04.com.qnap:ts-459:iscsi.racdbvote3.c59a2d -p 192.168.2.196 -l
iscsiadm -m node -T iqn.2004-04.com.qnap:ts-459:iscsi.racdbfra1.c59a2d -p 192.168.2.196 -l
-- Make iSCSI Targets Automatically Login
iscsiadm -m node -T iqn.2004-04.com.qnap:ts-459:iscsi.racdbvote1.c59a2d -p 192.168.2.196 --op update -n node.startup -v automatic
iscsiadm -m node -T iqn.2004-04.com.qnap:ts-459:iscsi.racdbfra2.c59a2d -p 192.168.2.196 --op update -n node.startup -v automatic
iscsiadm -m node -T iqn.2004-04.com.qnap:ts-459:iscsi.racdbdata2.c59a2d -p 192.168.2.196 --op update -n node.startup -v automatic
iscsiadm -m node -T iqn.2004-04.com.qnap:ts-459:iscsi.racdbvote2.c59a2d -p 192.168.2.196 --op update -n node.startup -v automatic
iscsiadm -m node -T iqn.2004-04.com.qnap:ts-459:iscsi.racdbcrs2.c59a2d -p 192.168.2.196 --op update -n node.startup -v automatic
iscsiadm -m node -T iqn.2004-04.com.qnap:ts-459:iscsi.racdbcrs1.c59a2d -p 192.168.2.196 --op update -n node.startup -v automatic
iscsiadm -m node -T iqn.2004-04.com.qnap:ts-459:iscsi.racdbdata1.c59a2d -p 192.168.2.196 --op update -n node.startup -v automatic
iscsiadm -m node -T iqn.2004-04.com.qnap:ts-459:iscsi.racdbvote3.c59a2d -p 192.168.2.196 --op update -n node.startup -v automatic
iscsiadm -m node -T iqn.2004-04.com.qnap:ts-459:iscsi.racdbfra1.c59a2d -p 192.168.2.196 --op update -n node.startup -v automatic
-- Create Persistent Local SCSI Device Names
- Identify Mappings
[root@racnode1 ~]# (cd /dev/disk/by-path; ls -l qnap | awk '{FS=" "; print $9 " " $10 " " $11}')
ip-192.168.2.196:3260-iscsi-iqn.2004-04.com.qnap:ts-459:iscsi.racdbcrs1.c59a2d-lun-0 -> ../../sdg
ip-192.168.2.196:3260-iscsi-iqn.2004-04.com.qnap:ts-459:iscsi.racdbcrs2.c59a2d-lun-0 -> ../../sdf
ip-192.168.2.196:3260-iscsi-iqn.2004-04.com.qnap:ts-459:iscsi.racdbdata1.c59a2d-lun-0 -> ../../sdi
ip-192.168.2.196:3260-iscsi-iqn.2004-04.com.qnap:ts-459:iscsi.racdbdata2.c59a2d-lun-0 -> ../../sdd
ip-192.168.2.196:3260-iscsi-iqn.2004-04.com.qnap:ts-459:iscsi.racdbfra1.c59a2d-lun-0 -> ../../sdj
ip-192.168.2.196:3260-iscsi-iqn.2004-04.com.qnap:ts-459:iscsi.racdbfra2.c59a2d-lun-0 -> ../../sdc
ip-192.168.2.196:3260-iscsi-iqn.2004-04.com.qnap:ts-459:iscsi.racdbvote1.c59a2d-lun-0 -> ../../sdb
ip-192.168.2.196:3260-iscsi-iqn.2004-04.com.qnap:ts-459:iscsi.racdbvote2.c59a2d-lun-0 -> ../../sde
ip-192.168.2.196:3260-iscsi-iqn.2004-04.com.qnap:ts-459:iscsi.racdbvote3.c59a2d-lun-0 -> ../../sdh
- Create Rules File
cat >> /etc/udev/rules.d/55-openiscsi.rules <<EOF
# /etc/udev/rules.d/55-openiscsi.rules
KERNEL=="sd*", BUS=="scsi", PROGRAM="/etc/udev/scripts/iscsidev.sh %b",SYMLINK+="iscsi/%c/part%n"
EOF
- Create Shell Script
mkdir -p /etc/udev/scripts
vi /etc/udev/scripts/iscsidev.sh
#!/bin/sh
# FILE: /etc/udev/scripts/iscsidev.sh
BUS=${1}
HOST=${BUS%%:*}
[ -e /sys/class/iscsi_host ] || exit 1
file="/sys/class/iscsi_host/host${HOST}/device/session*/iscsi_session*/targetname"
target_name=$(cat ${file})
# This is not an open-scsi drive
if [ -z "${target_name}" ]; then
exit 1
fi
# Check if QNAP drive
check_qnap_target_name=${target_name%%:*}
if [ $check_qnap_target_name = "iqn.2004-04.com.qnap" ]; then
target_name=`echo "${target_name%.*}"`
fi
echo "${target_name##*.}"
chmod 755 /etc/udev/scripts/iscsidev.sh
service iscsi stop
service iscsi start
[root@racnode1 ~]# ls /dev/iscsi/*
ls: /dev/iscsi/*: No such file or directory
1.) For some reason I cannot get the mappings to work correctly, I have rebooted the server and tried a number of different changes in the rules script. But for the life of me I cannot get it work.
I noticed when I rebooted the server that it failed to execute the iscsidev. When I manually run the shell script with a parameter it produces output
Can anyone help me to get this up and running?
2.) My QNAP Nas doesnt seem to publish iSCSI targets to only one NIC. I think this is down to the firmware/feature not being available. When I discover targets I get the following
[root@racnode1 ~]# (cd /dev/disk/by-path; ls -l *qnap* | awk '{FS=" "; print $9 " " $10 " " $11}')
ip-192.168.1.196:3260-iscsi-iqn.2004-04.com.qnap:ts-459:iscsi.racdbcrs1.c59a2d-lun-0 -> ../../sdh
ip-192.168.1.196:3260-iscsi-iqn.2004-04.com.qnap:ts-459:iscsi.racdbcrs2.c59a2d-lun-0 -> ../../sdm
ip-192.168.1.196:3260-iscsi-iqn.2004-04.com.qnap:ts-459:iscsi.racdbdata1.c59a2d-lun-0 -> ../../sdn
ip-192.168.1.196:3260-iscsi-iqn.2004-04.com.qnap:ts-459:iscsi.racdbdata2.c59a2d-lun-0 -> ../../sde
ip-192.168.1.196:3260-iscsi-iqn.2004-04.com.qnap:ts-459:iscsi.racdbfra1.c59a2d-lun-0 -> ../../sdr
ip-192.168.1.196:3260-iscsi-iqn.2004-04.com.qnap:ts-459:iscsi.racdbfra2.c59a2d-lun-0 -> ../../sdd
ip-192.168.1.196:3260-iscsi-iqn.2004-04.com.qnap:ts-459:iscsi.racdbvote1.c59a2d-lun-0 -> ../../sdb
ip-192.168.1.196:3260-iscsi-iqn.2004-04.com.qnap:ts-459:iscsi.racdbvote2.c59a2d-lun-0 -> ../../sdk
ip-192.168.1.196:3260-iscsi-iqn.2004-04.com.qnap:ts-459:iscsi.racdbvote3.c59a2d-lun-0 -> ../../sdp
ip-192.168.2.196:3260-iscsi-iqn.2004-04.com.qnap:ts-459:iscsi.racdbcrs1.c59a2d-lun-0 -> ../../sdi
ip-192.168.2.196:3260-iscsi-iqn.2004-04.com.qnap:ts-459:iscsi.racdbcrs2.c59a2d-lun-0 -> ../../sdg
ip-192.168.2.196:3260-iscsi-iqn.2004-04.com.qnap:ts-459:iscsi.racdbdata1.c59a2d-lun-0 -> ../../sdo
ip-192.168.2.196:3260-iscsi-iqn.2004-04.com.qnap:ts-459:iscsi.racdbdata2.c59a2d-lun-0 -> ../../sdj
ip-192.168.2.196:3260-iscsi-iqn.2004-04.com.qnap:ts-459:iscsi.racdbfra1.c59a2d-lun-0 -> ../../sds
ip-192.168.2.196:3260-iscsi-iqn.2004-04.com.qnap:ts-459:iscsi.racdbfra2.c59a2d-lun-0 -> ../../sdf
ip-192.168.2.196:3260-iscsi-iqn.2004-04.com.qnap:ts-459:iscsi.racdbvote1.c59a2d-lun-0 -> ../../sdc
ip-192.168.2.196:3260-iscsi-iqn.2004-04.com.qnap:ts-459:iscsi.racdbvote2.c59a2d-lun-0 -> ../../sdl
ip-192.168.2.196:3260-iscsi-iqn.2004-04.com.qnap:ts-459:iscsi.racdbvote3.c59a2d-lun-0 -> ../../sdq
It shows the same targets on both NIC's, I only need them on the private ip 192.168.2.196
Edited by: user1728822 on 07-May-2011 15:53
Edited by: user1728822 on 07-May-2011 16:08

Hi,
I'm facing the same issue.. If your issue is fixed..could you please let me know?
I'm trying to configure 11g RAC with OPenfiler and got stuck here.
Regards,
Kumar

Is there any limitation of firmware or hardware for QoS configuration (4400 controller & 1252 AP's)

Hi Experts,
Before proceeding for adding AP model 1131 and 1252 into my set-up , I need to know whether any limitation of firmware or hardware for QoS configuration in wireless set-up .
I have 4400 controller and 1130 & 1250 AP models.

Hi Vinod,
Since you have 4400 controllers, you can run upto WLC 7.0.x code. Refer this for more detail
http://www.cisco.com/c/en/us/td/docs/wireless/compatibility/matrix/compatibility-matrix.html
there is no specific limitation to 1131/1252 AP model as such, everything is WLC software dependent.
From later software 7.4.x,7.6.x,8.x, lots of improvement for QoS configuration & bandwidth control, but since your controller is old hardware, you cannot have those latest features.
here is a reference post on how QoS works in wireless environment
http://mrncciew.com/2012/11/28/understanding-wireless-qos-part-1/
HTH
Rasika
*** Pls rate all useful responses ****

Configure audio card for streaming audio via internet

I have a Pavilion Slimline s7320n PC. How can I configure the sound card for streaming audio for the internet?

i am trying to put my volume on my computer but don't know how hoping some one can help me

HT2589 I forgot the answers for the security questions, so i'm not able to purchase any thing from apple store. What can i do?

I forgot the answers for the security questions, so i'm not able to purchase any thing from apple store. What can i do?

If you have a rescue email address (which is not the same thing as an alternate email address) set up on your account then the steps half-way down this page should let you reset them : http://support.apple.com/kb/HT5312
If you don't have a rescue email address (you won't be able to add one until you can answer 2 of your questions) then you will need to contact iTunes Support / Apple to get the questions reset.
Contacting Apple about account security : http://support.apple.com/kb/HT5699
When they've been reset (and if you don't already have a rescue email address) you can then use the steps half-way down the HT5312 link above to add a rescue email address for potential future use

I am wondering if you can get live wall papers for iPhone, i down loaded app that said live wall papers but they did not do any thing

I am wondering if you can get live wall papers for the iphone 4s, i down loaded app that said live wall papers but they didnt actually do any thing... I am looking for the ones that move and stuff...

if you downloaded an app outside of app store it would be a jailbroken app which cant run on non jailbroken iphones
also "live" wallpapers suck battery alot

HT203167 there is some one he stolen my I phone how i can delete the contact and Pic. from my I phone 4 and for your information i was not know any thing about I clude

Dear Mr. Apple there is some one he stolen my I phone 4 in Yemen- Aden, and Am now in Saudi Arabia i checked with the agent here in saudi arabia this agent i buy this i phone from them, they said we are sorry we can't to close your phone becouse he is out side Saudi Arabia so is there other way to close this phone becouse my frinde they are suffering becouse this boy he used in bad way, and i don't know any thing about i clude, so i didn't activate, so please please please if you can to disconnect my i phone becouse all my picture in i phone and if you didn't support me who will do it?
Please do the need full for this other wise am sorry to say that you are not support your customers.
Thanks and your fast replay that mean you are satisfied your customers.
<Personal Info Edited By Host>

All you can do is call the service provider that phone was being used with to cancel the phone account at least.
However, if you did not have a passcode lock on it, then the person with it has access to everything on it. You should immediately change all your email account passwords, and any other online account's passwords you used or had set up on the phone.
There is nothing you can do remotely to the phone now, and even cancelling the phone service account will not stop someone from using your emails and such on wifi. Changing your account passwords will lock them out of your accounts.

I cant see any thing any SAP MMC for my XI server.

Hi All,
I cant see any thing any SAP MMC for my XI server.
I checked the services SAPXID_00 and SAPXID_01, those sevices were not running. when i try to start the service I am getting error 1067: The process terminated unexpectedly. I have uninstalled and reinstalled the service with sapstartsrv.exe but no luck.
I have also check SAP Note 82751
when i checked the log sapstartsrv.log, I saw this error
MSETCLXIDEV\xidadm is starting SAP System at 2011/01/17 16:16:47
SAP HA Trace: FindClusterResource: OpenCluster failed: 1753 [sapwinha.cpp, line 212]
SAP HA Trace: SAP_HA_FindSAPInstance returns: SAP_HA_FAIL [sapwinha.cpp, line 907]
Error: 13, Open Logging-File "sapstart.log". EACCES*: Permission denied OR: The data is invalid.
Please help to resolve this issue.
Thanks
Rehan
Edited by: Rehan Manzoor on Jan 19, 2011 12:39 PM

Hi,
Is it that there is no entry in SAP MMC for the system? Can you try to manually add the System in SAP MMC and check?I or is it that the system is already added and there is no info in SAP MMC. It is possible that the MMC is not working properly. You can reinstall the SAP MMC or better install the latest one. If the SAP MMC is not the issue here then it is possible that tthere is a some permission issue involved here.Could you check the whether the user with which the services are being started have correct permissions or not.
I had an issue where my SAP MMC was installed in a windows system and my SAP system was in Linux(Redhat). And because of the firewall and a security feature called SElinux my SAP MMC was not showing any information.There was a similar issue where i had to upgrade the LM tools. You can download the latest Lifecycle management software from SMP.
Regards,
Jyotish

I Am Having Trouble With Mozilla Firefox. For Some Reason I Can Not Type Any Thing In

I Am Having Trouble With Mozilla Firefox. For Some Reason I Can Not Type Any Thing In. I Can Not Type Anything Into Yahoo Search Or Any Where I Need A Password. Anytime I Try To Type Anythink In It Locks Up Firefox The Same With Thunderbird Can't Write An Email Thunderbird Locks Up When I Start Typing. My Roboform Will No Longer Fill In The Forms. I Have Uninstalled All Three Programs Three Times. Can You Give Any Help.
Thank You

Hi,
Sounds like you have two problems there. One for Firefox and one for Thunderbird.
We can help you with the Firefox question but your other Thunderbird question will have to go into the Thunderbird queue. You can create a new Thunderbird question by going to [/questions/new/thunderbird]
Can you try to start Firefox in Safe Mode to see if Firefox works properly with no error? You can start Firefox in Safe Mode below:
*'''Windows/Mac''': Go to Help > Restart with add-ons disabled
*'''Linux''': Run ''firefox -safe-mode'' in the Terminal/Konsole
If Firefox opens up fine with no problems, it's probably one of your extensions that's causing the issue. You can re-enable your add-ons one by one until you find the one that causes the issue upon being re-enabled.

ANy thing special for Streams configuration in RAC?

Similar Messages

Maybe you are looking for