Any way to create donation-based Membership Accounts in iWeb?

Hello,
I am trying to create a membership site where people can join with a donation in iWeb '09. How can I implement encryption as well as automatically generated membership access with a database of members? Hopefully that makes sense. Any suggestions would be appreciated!
Thank you!

iambradfordj wrote:
Hello,
I am trying to create a membership site where people can join with a donation in iWeb '09. How can I implement encryption as well as automatically generated membership access with a database of members? Hopefully that makes sense. Any suggestions would be appreciated!
There are 3rd party services/sites that offer this very service. I'd open up an account with one of them, and then add a linked button (HTML Snippet) that they generate onto your site.

Similar Messages

  • Any way to create an iTunes account without credit card or Paypal account?

    Any way to create an iTunes account without credit card or Paypal account? I've been given a couple of free downloads, but can't seem to redeem them without giving out a credit card number to register. Since I don't have access to a credit card or Paypal account for use online, how can I create an account to use prepaid iTunes cards, etc.? Thanks!

    I don't know what "something" you were trying to redeem, but if it was a valid iTunes Store give, go to the main iTunes Store page (within iTunes), click on the "Redeem" link on the right side of the page, and enter in the code from your card. You'll be able to create an iTunes Store account without needing a credit card.

  • ACS 5.3 Dashboard - Any way to create Dashboard for all users?

    I'm at the point of setting up admin access for engineers needing to have insight into the operations and status of our ACS 5.3 systems.
    I'm curious if there's any way to create a Dashboard that can be applied to all admin user accounts? (perhaps a custom role?)
    I've been able to customize the dashboard for my own account to show what is most relevant, but am unable to figure out how to apply this layout and setup to all other users.
    Basically, I have a number of folks that need to see this data, but that I can't exactly count on to setup their own dashboards to show the important details.  If there were some way to build a tab/dashboard/portlet, etc (whatver it may be) and have it apply to all users, that would save me TONS of work so that I don't have to login to each person's account and set things up for them.
    For example, I want to have all users see a tab/dashboard that shows the applet "Live Authentications", but with the protocol already configured to display TACACS vs the default which is RADIUS.
    Any thoughts?
    -Chris

    Chris,
    I see you are looking for read-only access to Dashboard. Currently there is no way to force all Admins to use same Dashboard and all admins will have full control of the Dashboard.
    Regards,
    ~JG
    Do rate helpful posts!

  • Is there any way to create a file compatible with Premiere Pro

    Is there any way to create a file in Premiere elements that is compatible with Premiere Pro and that can be used in Premiere Pro

    Consternation
    The important information that I do not see mentioned nor offered by you.
    1.What version of Premiere Elements are you using and on what computer operating system it is running? What version of Premiere Pro do you want to use?
    The Premiere Pro Import Supported Formats seem to indicate that it will accept the Premiere Elements project.prel (project file) on Windows Only.
    Adobe Premiere Pro Help | Supported file formats
    This may or may not be possible depending on damaged projects or outdated elements.
    2. If you want to export your Premiere Elements Timeline to a file saved to the computer hard drive and subsequently import that into your Premiere Pro version, that "should" work. You would go to the Premiere Elements Publish+Share/Computer/ and make a selection based on what the Premiere Pro Import Supported file formats are and what you need. I can help you with that. But, details first.
    But, just a "beware"...when you get to Premiere Elements 11 or 12 (if that is the version involved) Publish+Share/Computer/ there are several categories, but all you see is Adobe Flash Video, MPEG, and AVCHD. The rest of the list that includes AVI and QuickTime which both need to be scrolled to all of the time to see them, not just sometimes, with the thin scroll bar to the right of the list of choices. You can export files
    with AVI file extension, under Publish+Share/Computer/AVI
    with MOV file extension, under Publish + Share/Computer/QuickTime
    And, if you do not have QuickTime installed on your computer with Premiere Elements, you are not going to have presets for the QuickTime export.
    Remember, there is more to an export than just its file extension. Know your other export properties as well.
    In many cases, you can customize the export settings to suit your requirements.
    Problems will exist if you are trying to go from Premiere Elements Windows to Premiere Pro Mac or vice versa.
    I would be glad for the opportunity to help you with this issue, but details are needed.
    Looking forward to your follow up.
    Thanks.
    ATR

  • Is there any way to create a style sheet in APEX?

    Hi experts,
    I am in I am in Oracle Enterprise Manager 11g 11.2.0.1.0.
    Is there any way to create a style sheet in APEX any version?
    I want to create a style sheet and use APEX report column link to it.
    Thanks.
    Cow

    Well, if that is the case, then you'll need to do some PL/SQL programming to write a package to create all of that for you, then execute the package when the 'link' column is clicked.
    After your package is written, change the attributes on your link column to be a URL instead of page in your application and call it like:
    javascript:{MypopUp2('http://your.server.name/print/owner.package_name.sub_procedure?key=#COL01#',800,600);}
    On my system, I created a new DAD and user just for this one purpose, to read an select the information in my report, generate the HTML to display the data, etc. without leaving a loophole someone could exploit to get direct data manipulation access. My report though is a form-type report of all the data from about 40 tables for that one 'master' record, with css formatting included. I'm not directly generating a css file based upon data within the database, but simply adding the css formatting into the HTML file my package generates.
    Does this help your problem?
    Bill Ferguson

  • Any way to create a keyboard shortcut for keywords in Bridge CC?

    Just curious if there's any way to create a keyboard shortcut for "new keyword" and "new sub keyword" in Bridge CC?
    If not, that would be a welcome addition in any future Bridge update - being able to customize keyboard shortcuts or add your own the way you can in Premiere Pro CC.

    Steve,
    Not, as far as I know, directly, but the problem is with Aperture, not Keyboard Maestro.  Aperture has no command (afaik) for selecting the caption field of the Info Inspector.  Without a command, you will have to find another way to access it, or another way to accomplish what you want.
    You can specify the spot clicked by screen coordinates, so you cold use the Inspector HUD and the coordinates of the Caption field, as long as the Inspector HUD always pops up in the same location.
    Many dialog boxes allow the user to advance through the fields with the Tab key.  Unfortunately, the number of times you have to type "{Tab}" in order to get to a particular field depends on other interface elements (if the Control Bar is showing, add 2).  I don't know of a way to determine if the Control Bar is showing.
    You might find a work-around using a Metadata Preset and the Batch Change command.  Keyboard Maestro can easily pop up a dialog with a text field in which you can type what you want to go into Aperture's Caption field.
    The best thing to do is download the trial version and see if it meets your needs.  Keyboard Maestro is adept at creating macros based on keyboard input.  If the program does not provide keyboard equivalents, writing an effective macro becomes difficult.
    http://www.keyboardmaestro.com/main/
    The author provides exemplary documentation:
    http://wiki.keyboardmaestro.com/About_Keyboard_Maestro
    Lastly, for the use you cite, I simply show the Inspector if it's not showing (by typing "i"), change to the Info tab if it is not currently activated (by clicking, but note that opening the Inspector with the Info tab selected can be done with one command "View➞Inspector➞Info"), and then clicking in the Caption field, which is part of all of the Metadata Views I regularly use.
    HTH.  Perhaps one of our programming mavens will suggest something better.
    --Kirby.

  • Is there any way to have multiple user names/accounts on Icloud for families sharing an apple account?

    MY husband just got a iphone 5s last night, I have an iphone 5. We sharean apple ID.  When he backed up to icloud he got all of my pictures and contact numbers. Is there any way to create seperate icloud accounts so when  one of us back up we are only backing up our own data??

    You both need, & should use different Apple ID's for iCloud, iMessage & FaceTime. You both can continue to use the same Apple ID for iTunes content.
    Your husband needs an Apple ID for iMessage, FaceTime & iCloud.
    The Apple ID needs to be a verified email address. Once you have an email address, that can be verified, go here & create the ID:
    https://appleid.apple.com/cgi-bin/WebObjects/MyAppleId.woa/wa/createAppleId
    Then on his phone, turn off Contacts, Calendars, etc. for iCloud. You'll be prompted to keep the data or delete it from the phone, then turn off iMessage, FaceTime & delete the iCloud account...Settings>iCloud...scroll down...delete account. Then, setup iCloud using the new Apple ID, turn on iMessage & Facetime.
    This will have no affect on the ID you both share for iTunes content, & you can continue to do so.

  • Is there any way to create a VMvmare server cluster?

    Hi,
    I have two machines which don't support install ESXi, these machines are running centos 5 with no X and I installed vmware server 2.0.
    My question is, is there any way to create a vmware server cluster like is possible create in ESX?
    I know in ESX once you create a cluster, the resources are increased since resources are added. Is there any way to do same thing with vmware server 2.0?
    Also is there any other option for my machines, I don't want to install X since the machines don't have much resource.
    Thanks in advance.

    Welcome to the COmmunit - With VMware server each environment functions independently and there is no way to pool resources as you can with a DRS cluster - and remembering even in a DRS cluster the VMs swill only run on a single host at a time as they would in VMware Server machines/
    Also just because it is not suppported does not mean you will not be able to create a VM with an unsupported OS -

  • My kid`s been using my apple ID/account for years, but now that he`s older it`s time he got his own. Is there any way to either make a twin account so he doesn`t lose all his purchases from iTunes/AppStore when getting his own account?

    My kid`s been using my apple ID/account for years, but now that he`s older it`s time he got his own. Is there any way to either make a twin account so he doesn`t lose all his purchases from iTunes/AppStore or does he have to start from scratch? They payment can still be from my card/account, that`s not the problem, but facetime, imessage etc. is a available on both mine and his apple products (I know you can check what email/phone number we can be reached at, but it`s just a click and he see my messages and I his). It`s the privacy problem that is the most important.

    frank_o_s wrote:
    My kid`s been using my apple ID/account for years, but now that he`s older it`s time he got his own. Is there any way to either make a twin account so he doesn`t lose all his purchases from iTunes/AppStore or does he have to start from scratch? They payment can still be from my card/account, that`s not the problem, but facetime, imessage etc. is a available on both mine and his apple products (I know you can check what email/phone number we can be reached at, but it`s just a click and he see my messages and I his). It`s the privacy problem that is the most important.
    He needs to have his own account, the sooner the better.
    As for content, non-protected songs can simply be copied to his own new library, and he can use them.  As for protected content and apps, anything he still wants will have to be replaced.

  • My apple ID was disabled so i had to make a new apple ID, But the disabled apple ID  had all my games on it. Is there any way we could enable my disabled account

    My apple ID was disabled so i had to make a new apple ID, But the disabled apple ID had all my games on it. Is there any way we could enable my disabled account?????????????????????????

    If not this:
    Why do I see the message "This Apple ID has been disabled for security reasons” when I enter my password?
    This message means that someone was unable to sign in to this account multiple times. The Apple ID system will disable the account to prevent unauthorized people from gaining access to your information. You'll need to follow the instructions on My Apple ID to reset your password.
    Otherwise, contact iTunes:
    Apple - Support - iTunes - Contact Us

  • Is there any way to create a transcript document of the audio within a course?

    I have a course that someone else created that contains audio and would like to know if there is any way to create a "storyboard" of the audio so the SMEs can edit it instead of sending an EXE file for review or having to recreate the transcrip from scratch.

    I generally just have the transcript for my voiceover audio in the Slide Notes field for each slide, and then output my project to a Word document handout, making sure to select the option for slide objects and slide notes.  That creates a PPT-like handout that is easy to email to approvers.  They can see the transcript notes underneath each slide graphic.

  • Is there a way to create a paid Membership site using Muse?

    A client is wanting a website that has an area that is available to paid memberships. I have already read on how to create the secure zones, just wondering if there was a way to create a paid membership portion to the form. I have seen several hints at this being a possibility. Was just wondering if anyone has experience with this particular area? Or even a direction to search.

    Thanks for the info.
    Steps would be :
    - Create a page in BC which you want to be the landing page for secure zone , where users will login and then they will be directed to that page.
    - Go to Site Manager > Secure Zone > Create secure zone , Check sell membership access , Define currency,amount and frequency. Curreny would be the membership country currency, amount that you want users to pay and Frequency would be the time you want the membership to expire.
    - Go to Site Manager > Web forms> create web form > In edit properties , select the secure zone in secure zone list > Add username and password field > Specify payment method
    - Open page where you want to insert the secure zone login form and the web form to allow users to register for the secure zone and make the payment.
    Now with Muse , you can insert html part of the content that you created in BC
    - Open the page in Muse where you want to insert the sign in form , copy the html of the form which you created in BC and then insert in Muse Page.
    - Similarly do that for sign in form.
    Please note that site published from Muse are web hosting sites which does not includes secure zone, so you would need to upgrade the site plan which is a different site subscription.
    Although you can first try with a trial site( get in touch with support where they can change the site plan of your trial site ) as how this works and then after you finalize your site you can upgrade to paid site.
    This document includes instructions as how to setup secure zone :
    http://helpx.adobe.com/business-catalyst/partner/add-secure-area-your-site.html#id_31582
    I have uploaded a short video for your reference showing the steps , please download from here :
    https://www.dropbox.com/s/5vpg1qu3jpnx1bz/Tut_Eproduct.mov
    Thanks,
    Sanjit

  • Is there any way to create an installer for Mac OS and Linux OS once a stand alone application is created?

    Is there any way to create an installer for Mac OS and Linux OS once a stand alone application is created?  I have created an executable application that I want to distribute to Mac and Linux users (different applications were created in the respective OS).  I was wondering if there is any way to create an installer?  I think there probably isn't...  If the user were to simply download the Labview Run-time Engine from ni.com would they be able to run the application or is it more complicated than that?
    Thanks so much for your time.

    I think Shane tried to say, that it is on the Mac OS X installation DVD, NOT the LabVIEW for Mac OS X installation medium. And that could very well have changed in recent Mac OS X versions as well. They used to have Xcode on it too, but that seems gone as well.
    Rolf Kalbermatter
    CIT Engineering Netherlands
    a division of Test & Measurement Solutions

  • Is there any way to create admin role only for one resource.

    Hi all,
    I am trying to create an admin role with 'update user' capability. But I want to restrict the user(with the admin role) to be able to update a user's attribute only for one resource, The user(with the admin role) should not be able to update the attributes of the other resources which a user have.
    Is there any way to create admin role only for one resource?
    I customized the tabbed user form to show only one resource attribute (deleting the missing fields and adding my tab for the resource) and then assigned this new User Form to the user(with the admin role) in security tab.
    It works fine. But the problem is that if any user(with the admin role) is also admin of some other resource then he/she will not be able to view the other resource attributes.
    Please suggest,
    thanks

    The loop function always repeats the same region so of course the fade is also copied. So option+drag the original region to make a (non clone) copy, fade the first region and loop the second one (which you just copied).

  • Is there any way to create a wifi hotspot for my macbook using my IPad?, Is there any way to create a wifi hotspot for my macbook using my IPad?

    I am going to a lake cabin in Northern Minnesota for a week and need to get wifi for my Mac.  Is there any way to create a wifi hotspot using my Ipad so that I have internet service for my laptop?

    No, iPad can become a hot spot, but if you have an iPhone, it can tether if you have a data plan that incudes the tethering option.  With AT&T for example, you can add tethering for $20 month or for $45/month, you receive tethering and 4GB of data per month.  If you have the unlimited data plan from AT&T you'll unfortunately have to give it up if you want to tether.  You can also go to almost any carrier and purchase a MiFi unit which may work for you.  Whether iw will work in Northern Minnesota is something only your carrier could answer.

Maybe you are looking for