Any way to display time code for source video?

I don't see any way to get AE to display the embedded timecode of a source video. AE does know this, as you can see it by looking at the metadata for a video.
Does anybody know a plugin that does this, or has anyone written an expression already to do it, using the timecode window effect?
:<)McFrisco

As explained, AE does not expose this stuff. not to plug-ins, not to expressions. It's a long-standing issue, but can't be helped. In addition to using the TC effect, it may alos help to set the composition start time to the in-point time of the clip. Just a thought: Another way would be to take a detour via Premiere - apply the TC effect set to Media as source, import the Premiere stuff as DynamicLink items.
Mylenium

Similar Messages

Is there any way to change a title for streaming video in QT Pro?

I'm trying to follow several streaming feeds at the same time, all with unhelpful titles.
For example, this is the URL I'm using to view the ROV 2 feed for Discoverer Enterprise.
http://mfile.akamai.com/97892/live/reflector:21145.asx?bkup=21327
which results in the title, reflector:21145.asx?bkup=21327.

Actually, what I was wanting to know is if I could just change the title while watching the streaming video rather than saving the feed. I can do this in a VLC playlist but I can't seem to figure out how to open multiple windows for feeds in VLC. Also, VLC doesn't let me go back in the cached feed to see and/or save snippets which I can easily do in QuickTime Pro.
I have been able to save the streaming feeds like this although I have the $30 upgrade for Flip4Mac which I needed to export for YouTube. There may be a way to do the same thing with something free but I know less than nothing about video and this worked.
Move the playhead slider to start of snippet
Type "i" to get slider for start of snippet
Move the playhead slider to end of snippet
Type "o" to get slider for end of snippet
Adjust the "i" and "o" sliders if needed.
Right click on the feed and choose copy.
Go to File -> New Player (command N)
Go to Edit -> Paste (command V)
Go to File -> Save (command S) and save as self-contained movie
After that I use the file I just saved with the directions on YouTube to export it to a file that will process on their site.
Here is an example that shows a ROV being lowered from the deck of its mothership into the water.
http://www.youtube.com/watch?v=VsYinE5cNx8
I saved it from this streaming feed which I loaded into QuickTime Pro (File -> Open URL or command U and paste URL). I seem to recall I needed the free Flip4Mac to view this in QuickTime.
http://mfile.akamai.com/97892/live/reflector:47175.asx?bkup=21144
I'm all set with what I want to do other than being able to change the titles on the feeds as I'm watching them in QuickTime Pro.

Is there any way to display filenames or captions for photos?

is there any way to display filenames or captions for photos?

Thanks. There are so many it's very hard to see which one does what. Since I edit on the MacBook Pro using Photoshop Elements, all I really need is a way of seeing the filenames, and secondarily re-arranging thumbnails on the iPad screen manually.

Any way to display dorpdown menu over quick time player

hi all,
Is there Any way to display dorpdown menu over quick time
player in Dynamic HTML page like the flash parameters wmode
transparent....The menu and quick time is different Td's
Thanks

Not that I know of.
Murray --- ICQ 71997575
Adobe Community Expert
(If you *MUST* email me, don't LAUGH when you do so!)
==================
http://www.projectseven.com/go
- DW FAQs, Tutorials & Resources
http://www.dwfaq.com - DW FAQs,
Tutorials & Resources
==================
"jibysk" <[email protected]> wrote in
message
news:ff9rjk$i6l$[email protected]..
> hi all,
>
> Is there Any way to display dorpdown menu over quick
time player in
> Dynamic HTML page like the flash parameters wmode
transparent....The menu
> and quick time is different Td's
>
> Thanks

Any way to display a message when Flash is not found on the iPad?

Apple is obviously rejecting Flash to protect it's 'App' revenue. I've been on Android phones that run Flash and display all my content perfectly smooth. It can be quite frustrating how they are trying to bury it when I still have yet to see HTML5 replicate the type of interactive content Flash is capable of producing.
Is there any way to display a message on the iPad when the Flash player is not found?
I'd like it to says something along the lines of:
"Unfortunately the Apple iPad does not support the Flash player because their business interests do not want it taking away from their App revenue.
Did you know that the Dell Streak, HTC Flyer, Blackberry Playbook, Motorola Xoom, Samsung Galaxy Tab, Toshiba Thrive, and HP Touchpad all support the Flash player?"
My HTML code looks something like this...
<html>
<head>
<title>My Page</title>
<meta http-equiv="Content-Type" content="text/html; charset=iso-8859-1">
</head>
<body bgcolor="#ECECEC" leftmargin="0" topmargin="0" marginwidth="0" marginheight="0">
<body onresize="setFlashSize()">
<div id="flashid" style="width:100%; height:100%;">
<script type="text/javascript" language="JavaScript">
function setFlashSize(){
var viewportheight = document.body.clientHeight;
var viewportwidth = document.body.clientWidth;
var mydiv = document.getElementById("flashid");
var styleheight = parseInt(mydiv.style.height);
var stylewidth = parseInt(mydiv.style.width);
if (viewportwidth<880){
document.getElementById("flashid").style.width = 880+"px"; }
else {
document.getElementById("flashid").style.width = 100+"%";}
if (viewportheight<760){
document.getElementById("flashid").style.height = 760+"px"; }
else {
document.getElementById("flashid").style.height = 100+"%";}
setFlashSize();
document.write('<object data="index1.swf" width="100%" height="100%" type="application/x-shockwave-flash">');
document.write('<param name="movie" value="index1.swf" />');
document.write('<param name="allowScriptAccess" value="always" />');
document.write('</object>');
</script>
<noscript>Javascript must be enabled to view Flash movie</noscript>
</div>
</body>
</html>

Use swfobject for Flash detection and you can provide all kinds of alternate content... simple text, images, links, .js slideshow, a mov or mp4 video just for the iPhone... ANYTHING this is regular HTML. Your imagination is the only limit.
And YES, HTML5 is a far cry from replicating Flash... so give them the best of both worlds.
http://code.google.com/p/swfobject/
Review this article which deals with Flash and SEO for more ideas:
If you think that Flash is somehow bad for SEO, it's time to dispell that MYTH!
If fact, in some circumstances I'll use Flash INSTEAD of just HTML because then I'll have better SEO than with just HTML alone.
http://www.worldbarefootcenter.com/
The link to World Barefoot Center in the above post is just one example. View the source code and you see a couple paragraphs of text along with regular HTML links.... but what displays is the Flash version of the image and Flash links.
The client provided the artwork for the page... and that's what they wanted to use a .jpg image. Well yes, that could be done in HTML but it would be virtually invisible to Google. So Instead I converted the image into a Flash .swf and used swfobject to display the Flash. swfobject allows you to create alternate content inside the <div> which also holds the Flash .swf, then when the page is loaded it detects if the browser has the Flash pluggin. If it does, it displays just the Flash content, if not, it displays the alternate content. Since almost everyone has the Flash pluggin, for most people the Flash version of the <div> will display.
The alternate content for that <div> can be any regular HTML text, images, media player, links, etc., anything that you would use if you were not using the Flash. Now the best part is that the alternate content can be "over the top" as far as optimizing for SEO, since it will not be seen by most viewers.
Here's another example of SEO with Flash.. again, the page is just a single image provided by the client:
http://www.ksowetsuits.com/
View the source code. The alt content is paragraph after paragraph of information about the site, including lists and links. If it was just the HTML, it might be kind of a boring Home page. But for SEO I can go "over the top" in promoting the site, since most viewers will never see that part... but it's all indexed by search engines. The end result is BETTER SEO using Flash than just HTML.
On another Web site, a Flash video is displayed, the alt content is the complete text narration of the video. Now how many people would take the time to read that if they could just watch the video instead?? again, better SEO with Flash than without. In fact in one case we had first page search result from that video narration within 4 hours of posting the page.
On still another site with a Flash video, the alt content is another video, but a .mov version, which will, in effect play Flash video on the iPhone (not possible you say??). Well since the iPhone does not have Flash pluggin, it simply displays the .mov version of the video, while everyione else sees the Flash version.
So anyway, if Flash is a part of your Web development, you should look into using swfobject and alternate content.
http://code.google.com/p/swfobject/
Best wishes,
Eye for Video
www.cidigitalmedia.com
Adninjastrator

Is there any way in FDQM to validate the source records against the essbase

hi everyone
i want to know is there any way that FDQM can validate the source records against essbase. say for example i have a a ud dimension member coming from the source i want to compare this member with essbase member in the outline and pass/fail the validation. can we do this?
thanks
tm

Hi
Are you processing through the web client or as a batch process?
If you are loading manually through the web then it is standard functionality to highlight any source metadata imported that does not get mapped to a target, you then get the opportunity to correct those members at the Validate stage. If you are setting up mapping tables with specific target members then these have to be valid members in the Essbase outline (although I guess there is a risk that those members change over time and do you mappings stay in sync), it also doesn't do that validation if you upload your maps from template files (.xls / .tra / .trn) or if you have a * to * like mapping.
If you are processing in batch then if there are any members that do not have a vliad target member after import (remember mapping is applied during the import stage) then the batch fails. You can use the AutoMapCorrect feature to overcome this and map to a default 'suspense' type member if that gives you an issue.
Ultimately if you get to the load stage and the combination of members is not valid then FDM produces a load error file, this will contain all of the records exported from FDM that have failed to load to Essbase. What this doesn't easily give you is the source metadata that makes up those failed records.
Can you provide any more info as to your current process and then we might be able to provide a few more pointers.
Hope this helps
Stuart

How can i request the actual time code of digital video recorder, i am using RS232 interface for asking actual time code of digital video recording

how can i request the actual time code of digital video recorder, i am using RS232 interface for asking actual time code of digital video recording

If you have an RS-232 interface to the digital video recorder, it may be that you can send a command to the video recorder in order to get the time code sent back to your application - you would then read this as a string and then incorporate this data into your program.
The best source of help will be any documentation you have relating to the serial (RS-232) interface with the digital video recorder. This documentation should have commands that you can send to the recorder and expected response strings that you should get back from the device. This task should be straightforward but can often be frustrating without documentation about the video recorder. This will not be something that you can "guess" - past experience in writing serial communication ap
plications has shown that a good manual is your best friend.
Failing this if you have any source code for example programs that have already been written to communicate with the recorder, you might be able to extract the relevant ASCII strings and use them within your application. This is true whether you are using LabVIEW or a text-based language.
Jeremy

Any way to pass Multiple Values for a single Label in the Parameter?

I have a Report that Contains 2 Parameters, @Customer & @Area. When trying to set up the Available Values for @Area, I'm having issues using multiple values for one Label, i.e. = "4006" Or "4610"
One of the Filters in the Report is an Operation number, which is the [OPERATION] field, which is setup as a filter on the Tablix referencing the @Area parameter.
PROBLEM: I cannot retrieve any data when trying to use the ‘Or’ Operator here. If I simply put “4006” or “4610” I retrieve data, but when trying to combine it returns no data.
Example, I need to allow a user to select ‘Chassis Incoming’, which would include data from Operations 4006 & 4610.
QUESTION:
Any way to pass Multiple Values for a single Label in the Parameter?
I realize the typical solution may be to use ‘Multi-Value’ selection, but in this case we want the User to select the Area and the multiple values for Filtering will be automatically determined for them. Otherwise, they are subject to not getting
it correct.
I have tried several different ways, such as =”4006” Or “4610”, =(“4006”, “4610”), = In(“4006”, “4610”), etc….
Note: We are using Report Builder 3.0

Based on my experience, there's no way to 'intercept' the query that gets passed back to SQL Server, so a Split wouldn't work.
Try creating either a function or stored procedure using the code below (compliments to
http://www.dotnetspider.com/resources/4680-Parse-comma-separated-string-SQL.aspx) to parse the string:
CREATE FUNCTION dbo.Parse(@Array VARCHAR(1000), @Separator VARCHAR(10))
RETURNS @ResultTable TABLE (ParseValue VARCHAR(100))AS
BEGIN
DECLARE @SeparatorPosition INT
DECLARE @ArrayValue VARCHAR(1000)
SET @Array = @Array + @Separator
WHILE PATINDEX('%' + @Separator + '%' , @Array) <> 0
BEGIN
SELECT @SeparatorPosition = PATINDEX('%' + @Separator + '%', @Array)
SELECT @ArrayValue = LEFT(@Array, @SeparatorPosition - 1)
INSERT @ResultTable VALUES (CAST(@ArrayValue AS VARCHAR))
SELECT @Array = STUFF(@Array, 1, @SeparatorPosition, '')
END
RETURN
END
Once created you can do things like this:
SELECT * FROM Parse('John,Bill,David,Thomas', ',')
SELECT * FROM (SELECT 'John' AS TestName union select 'David' AS TestName) AS Main
WHERE TestName IN (SELECT ParseValue FROM dbo.Parse('John,Bill,David,Thomas', ','))
This is what your SQL query would probably look like:
SELECT OperationID, OperationName FROM dbo.Operations
WHERE AreaID IN (SELECT ParseValue FROM dbo.Parse(@Area, ','))
You may need to fiddle around with the Separator depending on whether SQL Server inserts a space between the comma and next value.

Is there any way to create an installer for Mac OS and Linux OS once a stand alone application is created?

Is there any way to create an installer for Mac OS and Linux OS once a stand alone application is created? I have created an executable application that I want to distribute to Mac and Linux users (different applications were created in the respective OS). I was wondering if there is any way to create an installer? I think there probably isn't... If the user were to simply download the Labview Run-time Engine from ni.com would they be able to run the application or is it more complicated than that?
Thanks so much for your time.

I think Shane tried to say, that it is on the Mac OS X installation DVD, NOT the LabVIEW for Mac OS X installation medium. And that could very well have changed in recent Mac OS X versions as well. They used to have Xcode on it too, but that seems gone as well.
Rolf Kalbermatter
CIT Engineering Netherlands
a division of Test & Measurement Solutions

Is there any way to create a reminder for "today"?

Is there any way to create a reminder for "today" in the new Reminders app? I used to be able to pull up the "today" list and add things that would go to my default list but automatically show up for today but now it looks as though that option is gone. Additionally, any way to get dates/times to show up with reminders in the Notification Center?

Hey chewie314,
Thanks for the question. From the information you provided, it sounds like you might be looking for the "Scheduled" view. This view will show all of your reminders that are scheduled in a list. To access the schedule view, click the icon:
Reminders - iPhone User Guide
http://help.apple.com/iphone/7/#/iph88463e18
Thanks,
Matt M.

How do I display the complete time sequence for a video clip in iMovie?

How do I display the time complete time sequence for a video clip in iMovie?
I'm trying to create a movie for someone where they provided me the video clips and what time sequences they want extracted. For example: Video footage from time 5m22s to 9m:18s and 11m17s to 15m31s from the imported video clip. I know you can select video but I cannot figure out how to select from those requested time markers.
Any help would be apreciated.

Open the file using QuickTime Player and then open the Movie Inspector window.

Is there any way to display a file that contains text and pictures

Hi all,
I was wondering if java has any way to display a file that contains both text and pictures. I have tried using the RTFEditorKit and using an RTF file and it only diplays the text contained in the file and omits the pictures all together.
code:
import java.awt.*;
import java.io.*;
import javax.swing.*;
import javax.swing.text.rtf.RTFEditorKit;
public class Test
     JScrollPane scroll;
     JEditorPane edit=new JEditorPane();
     RTFEditorKit kit=new RTFEditorKit();
     public Test()
          final JFrame frame = new JFrame();
          frame.setDefaultCloseOperation(JFrame.EXIT_ON_CLOSE);
     edit.setEditorKit(kit);
     edit.setEditable(false);
     try
          kit.read(new FileReader(new File("Installation.rtf")),edit.getDocument(),0);
          catch(Exception e)
               JOptionPane.showMessageDialog(null, e);
     frame.getContentPane().add(new JScrollPane(edit));
     Dimension screenSize = Toolkit.getDefaultToolkit().getScreenSize();
          frame.setBounds(0,0,screenSize.width, screenSize.height);
     frame.show();
     public static void main(String[] args)
new Test();
Please help!
thanks in advance,
Denise

Not good as that usually means the project itself was corrupt.
Any chance you sync'd to Creative Cloud? That's the only way I know of that backs up your PS Touch (PSDX) files.

Is there any way to set a property for all existing Form Fields of a particular type (Che

In versions of Acrobat prior to version 9, selecting a particular form tool (Textbox, Checkbox), etc. would only display Fields of that particular type in the Acrobat Designer (not LiveCycle).
If one wanted to change a particular property of all check boxes for example, one would select the Checkbox Tool, Click Edit>Select All>Right Click one of the Checkboxes and Set the Property for all of the Form's Checkboxes.
Selecting a particular form tool in the Acrobat (not Lifecycle) Designer in version 9 appears to no longer filter the display to that particular form field type. Is there any way to display only 1 particular form field type in or set a particular property for all existing Form Fields of a particular type (Check Box, Text Box, etc.) in Acrobat 9?

Thanks for the tip..Am aware of this option and have used JavaScript to batch change properties in the past...
Am looking for a way to replicate the interactive procedure available in previous versions. Also, want a way to only display certain Form Field types (use this when analyzing forms which I didn't create).

Does anybody have the source code for playing video..?

Hi i am new to J2ME. Does any body have the source code for playing video?

The WTK includes a video player example. I would start by looking there. In addtion SE and Nokia (if I remember correctly) both have video examples on their developer web sites.
The developer sites are
http://forum.nokia.com
http://developer.sonyericsson.com
For some of my midlets I use a utility class. You can view the source here:
http://hostj2me.cliqcafe.com/www/forumtopicview.html?fid=46&categoryId=36&fpn=0
Works for my needs;

Is there any way to upload Tariff Code (with multiple XML files) from application server?

Hi All,
Is there any way to upload Tariff Code (with multiple XML files) from application server?. Its urgent.
Regards,
Jatin

Hi Jatin,
Yes, of course you can upload multiple files for tariff codes.
This can be done by the below path:-
SAP GTS Cockpit(tcode-/sapsll/menu_legal)-->Customs Management-->Classification-->Classification Master Data-->Upload Tariff Code Numbers from XML file(tocde- /SAPSLL/LLNS_UPL101).
In the above area after browsing and choosing the first file, please select multiple check box to choose more files as well. Then you can further select your application server and upload all those files in one go.
PS:- Although, we have an option to upload multiple such files but actually we should avoid multiple file uploads due to various reasons. Hence, please take utmost care during such procedure.
Regards,
Aman

Any way to display time code for source video?

Similar Messages

Maybe you are looking for