How do I display the complete time sequence for a video clip in iMovie?

How do I display the time complete time sequence for a video clip in iMovie?
I'm trying to create a movie for someone where they provided me the video clips and what time sequences they want extracted.  For example:  Video footage from time 5m22s to 9m:18s and 11m17s to 15m31s from the imported video clip.  I know you can select video but I cannot figure out how to select from those requested time markers.
Any help would be apreciated.

Open the file using QuickTime Player and then open the Movie Inspector window.

Similar Messages

  • How do you display the capacity/free space for the hard drive......

    How do you display the capacity/free space for the hard drive on the desktop, under the hard drive icon.... I have seen this done, but I am not seeing any options to do so.... thanks.

    View, Show View Options…, Show item info checkbox.

  • How can i request the actual time code of digital video recorder, i am using RS232 interface for asking actual time code of digital video recording

    how can i request the actual time code of digital video recorder, i am using RS232 interface for asking actual time code of digital video recording

    If you have an RS-232 interface to the digital video recorder, it may be that you can send a command to the video recorder in order to get the time code sent back to your application - you would then read this as a string and then incorporate this data into your program.
    The best source of help will be any documentation you have relating to the serial (RS-232) interface with the digital video recorder. This documentation should have commands that you can send to the recorder and expected response strings that you should get back from the device. This task should be straightforward but can often be frustrating without documentation about the video recorder. This will not be something that you can "guess" - past experience in writing serial communication ap
    plications has shown that a good manual is your best friend.
    Failing this if you have any source code for example programs that have already been written to communicate with the recorder, you might be able to extract the relevant ASCII strings and use them within your application. This is true whether you are using LabVIEW or a text-based language.
    Jeremy

  • How can I display the elapsed time of the course using Advanced Actions in Captivate?

    I have a Captivate course which is approximately 35 minutes in length. On each slide I would like to display to the user, the current elapsed time.
    EXAMPLE:
    25/35 minutes complete
    The 35 would remain static, so I have been working with the elapsed time system variable in CP: elapsed:$$cpInfoElapsedTimeMS$$
    I can't seem to get the variable to properly display the elapsed time in minutes, rather than miliseconds. Attached is a screen shot of my advanced action.
    Can anyone provide guidence regarding how I should structure this differntly?

    I talked about that Timer widget in that blog post and pointed to another one:
    http://blog.lilybiri.com/timer-widget-to-stress-your-learners
    If you are on CP7, you'll have this widget also as an interaction, which means it is compatible with HTML5 output. Amd there is also an hourglass interaction, with similar functionality but... did not blog about that one
    PS: Check Gallery\Widgets to find all widgets. Default path is set to Interactions

  • How we can display the running time as an output by writting abap report?

    hi to all,
         my name ahmed iam just abap fresher.i know java/j2ee very well.
    i want to display the runing time as an output of abap report.Is it possible if possible how.

    Hi,
    system field  SY-UZEIT
    WRITE : SY-UZEIT.
    Regards,
    V.Balaji
    Reward if Usefull...

  • How do I determine the interrupt detection sequences for an HP 82350A PCI GPIB card?

    I am trying to install an HP 82350A PCI GPIB card in CentOS 6.4. I have installed NI-VISA 5.4.
    I tinkered around and found driverwizard in /usr/local/bin. It creates an ini file to control the PCI GPIB card.
    I had somehow succeeded in detecting the card (PXI3::0::INSTR). My driverwizard output looks like this
    [Module]
    ModuleName = "PLX PCI <-> IOBus Bridge"
    ModuleVendor = "PLX Technology, Inc."
    ModelCode = 0x9050
    ManufCode = 0x10B5
    SubsystemModelCode = 0x10B0
    SubsystemManufCode = 0x103C
    VISARegistration = Simple
    As you can see, it does not have interrupt handling built into it, so I cannot access it properly.
    How do I set up interrupt handling for this card? What are the specifications for the following fields?
    Interrupt Detection:
    Access Type
    Access Width
    Address Space
    Space Offset
    Compare Mask
    Write/Compare Value
    Interrupt Removal:
    Access Type
    Access Width
    Address Space
    Space Offset
    Compare Mask
    Write/Compare Value
    Interrupt Disarm:
    Access Type
    Access Width
    Address Space
    Space Offset
    Compare Mask
    Write/Compare Value
    This is the first time I have tried hacking at the PCI interrupt level. At the very least, how do I find out the values for the above parameters? Or at best, straight away what are the values for those parameters?

    Their IO Libraries Suite supports only Windows. Our lab probably used Windows before. This 82350A card is quite ancient. I need to use this because we also have ancient instruments that do not have Ethernet.

  • How to find out the last time login for a locked login account?

    In ASE 15.4,there are many login account show as locked and unlocked. How to find out the last login time for those locked login account?

    Thank you.  The version of my ASE is 12.5.4.
    This is what I got from select * from syslogins: 
    suid status accdate totcpu totio spacelimit timelimit resultlimit dbname name password language pwdate audflags fullname srvname logincount procid
    1
    30 2 10/25/2012 11:41:10.430 AM 0 0 0 0 0 . . ... us_english 02/24/2.0.08 12:55:38.640 PM 0 [NULL] [NULL] [NULL] [NULL]
    this is what I got from exec sp_displaylogin 'mylogin':
    1 Suid: 46                               
    2 Loginame: mylogin   
    3 Fullname: FN LN
    4 Default Database: mydb
    5 Default Language: us_english   
    6 Auto Login Script:    
    7 Configured Authorization:   
    8 Locked: YES                              
    9 Date of Last Password Change: Apr 17 2010  2:36PM    
    10 Password expiration interval: 0            
    11 Password expired: NO                               
    12 Minimum password length: 6            
    13 Maximum failed logins: 0            
    14 Current failed login attempts:    
    15 Authenticate with: AUTH_DEFAULT                     
    which one is for last login time?

  • How do I get the ducking to work for detached audio clips to reduce the volume of background music?

    I have detached audio from clips which explains what I am doing in the video clips (they are muted). I also have a song that I want to play at normal volume in the background when there isn't an audio clip in which I am talking and to reduce volume when I am. On the audio clip of me talking I have the ducking checked and set but there is no change in the music volume. Does anyone know how to fix this?

    Hi JC Thompson,
    Welcome to the Apple Support Communities!
    I understand you are having issues with the sound from the receiver of your iPhone. Please use the following steps in the article below to try and isolate and resolve this issue.
    iPhone: Receiver and call audio quality issues
    http://support.apple.com/kb/ts5196
    I hope this helps,   
    -Joe

  • On iPhone 6, How do I display the date, time, and location where a photo was taken

    On my previous iPhone (4S), I used the "Info' option in iPhoto to see where and when a photo was taken. I have a new phone (iOS 8.3) and iPhoto is not supported, so I have to use the Photos app. I cannot figure out how to see where and when a photo was taken in the Photos app. Thanks for any insight anyone can provide.

    Hello there, marklewis.
    When wanting to find location information of photos on your iOS device in iOS 8, the online User Guide provides some great information for how to search:
    View photos and videos - iPhone
    View by location. While viewing by year or by collection, tap . Photos and videos that include location information appear on a map, showing where they were taken.
    While viewing a photo or video, tap to show and hide the controls. Swipe left or right to go forward or backward.
    Search photos. From Albums or Photos, tap to search by date (month and year), or place (city and state). Search also keeps your Recent Searches on hand and gives you a list of suggested searches.
    Thanks for reaching out to Apple Support Communities.
    Cheers,
    Pedro.

  • How can I display the password expiration date for a user

    I have created a GUI (using PrimalForms) which runs powershel scripts to pull information like user ID, email address, last logon ec. for the helpdesk to help establish the validity of some user claims of "it worked yesterday" and the like.
    I have been asked to add the password expiration date, but I am struggling to get the code for this addition.
    Does anyone know how I can include this, and have it in a human readable format?
    The current scripts (there are 3) allow the helpdesk staff to search on user ID and display name, the third provides the last logon, it was impossible to include this in the other scripts so I added an extra search button and called it good. An example of
    these scripts is below (please note, PrimalForms needs a slightly different syntax in order to get the results displayed, but the core script is standard PS, I use Powershell 3.0)
    $results.Text=Get-ADUser -Filter "sAMAccountName -eq '$($EntryBox.text)'" -Properties DisplayName, sAMAccountName, mail, extensionattribute5, PasswordLastSet, PasswordExpired, PasswordNeverExpires, buMemberOf, telephoneNumber, msExchOmaAdminWirelessEnable, whenCreated, whenChanged, enabled, AccountExpirationDate | select givenName, surname, DisplayName, sAMAccountName, mail, extensionattribute5, PasswordLastSet, PasswordExpired, PasswordNeverExpires, buMemberOf, telephoneNumber, msExchOmaAdminWirelessEnable, whenCreated, whenChanged, enabled, AccountExpirationDate | Out-String
    $results.Focus()
    for info:
    $results.text is the window in the GUI results are displayed  in
    $entrybox.text is the text box the helpdesk staff use to input the user ID or display name of the account they are querying
    $results.focus simply tells the script to put the results in the results.text window
    The screenshot below shows the current setup, this is purely to put the above information into perspective. Obviously some of the information displayed has been removed/redacted along with our logo.

    Hi,
    Here's an example you can build from:
    $maxPasswordAge = 120
    Get-ADUser USER -Properties PasswordLastSet |
    Select SamAccountName,
    PasswordLastSet,
    @{N='PasswordLifeRemaining';E={$maxPasswordAge - ((Get-Date) - $_.PasswordLastSet).Days}},
    @{N='PasswordExpirationDate';E={(Get-Date $_.PasswordLastSet).AddDays($maxPasswordAge)}}
    Don't retire TechNet! -
    (Don't give up yet - 13,085+ strong and growing)

  • How can I set the query time out for SQVI?

    Hi,
      I want to setup query timeout for a particular user so that if his query (created in SQVI) takes more then say 10 minutes, it automatically times out and system resources are freed up.
    How can I do this for a specific user? Also in case I cant do it for a specific user how can I do it for all users?
    Thanks for reading

    Hello Srikrishna,
    The SQVI is a dialog transaction and henc its governed by your system's rdisp/max_wprun_time parameter.
    A dialog work process has a run-time limit that prevents users from interactively running especially long reports. By default, the system terminates any dialog work process in a transaction that exceeds 300 seconds. Although the value of the limit can be changed (in the system profile parameter rdisp/max_wprun_time), that limit is always in effect for dialog work processes. No such limit applies to background work processes.
    Regards,
    Siddhesh

  • How do I set the default startup sequence for iWork documents under mountain lion?

    I am frustrated when starting Pages under Mountain Lion (OSX 10.8.2). Instead of opening with the documents that I was working on when I closed the app, it opens with a standard "open" dialog box. I am forced to navigate through my folders and files or "create a new document" and then go to previously opened files. I would like Pages to open in the same status it was when I last used it, or if no files were open, to then automatically "create a new document" using the "Blank" template. In other words, how do I open Pages directly without the intervening dialog boxes?

    Open General preferences and uncheck these boxes:

  • How can I see the commit time stamp for a transaction?

    I’m looking to see if there is any way to tell, through a select, when a transaction was committed?
     I know you can get the transaction id by selecting the
    sys.dm_tran_current_transaction within a trigger and saving it to the table your writing to. But once you have that can you later use that transaction ID to see when the transaction as a whole was committed. This
    would be similar to the way change tracking uses the sys.dm_tran_commit_table, and the $sys_change_xdes_id field on the table being tracked, but you could do it through a select without being logged into a DAC connection. My question pertains to SQL Server
    versions 2005 and greater, but if this can only be done in a specific version please let me know.
    This would pertain to a read committed isolation level if that makes a diffrence.
     Thank you

    CREATE PROCEDURE sp1 AS                                
    BEGIN TRY                                                         
       SET NOCOUNT ON                                                 
       SET XACT_ABORT ON                                             
       SELECT 1/0
    END TRY                                                          
    BEGIN CATCH
       IF @@trancount > 0 ROLLBACK TRANSACTION                        
    END CATCH                                                        
    go
    Best Regards,Uri Dimant SQL Server MVP,
    http://sqlblog.com/blogs/uri_dimant/
    MS SQL optimization: MS SQL Development and Optimization
    MS SQL Consulting:
    Large scale of database and data cleansing
    Remote DBA Services:
    Improves MS SQL Database Performance
    SQL Server Integration Services:
    Business Intelligence

  • How to display the current time in a UIX page

    Hi All,
    another UIX question....
    A requirement of a customer is to display to current data and time in every page.
    It should be done in a <header>. So i'm writing a new (template based) renderer for that element. How can i display the current time and date on it?
    Thanks in advance for any help...
    Regards,
    Robert Willems

    Hi Robert -
    When you say you are writing a template-based Renderer, do you mean that you are creating a custom look and feel and replacing the header Renderer? If so, I'd recommend instead simply creating your own template (not template-based Renderer), and reference your template directly from your uiXML pages where you want to insert the timestamp.
    You'll probably want to write a method data provider which calls System.currentTime(), convert the result to a date, and then use Java's date formatting capabilities (see java.text.format.DateFormat) to produce a user presentable String that you can return from your data provider.
    For more info (and samples) on templates and data binding, see the "Templates and Data Binding" section of the "Includes and Templating in ADF UIX" help topic:
    http://tinyurl.com/5b7bf
    Andy

  • How can BPC display the property in report input schedule

    When create a property, if the InApp is check, we can use the property in the MDX Query, however what is the best way to display the property in report and input schedule?
    Although we can use the EvPRO function, but according the definition of EvPRO
    "The EvPRO (Property value) function returns the value of a specified property for a specified member."
    for example =EVPRO("Finance","Sales","Currency") will returns USD, if the currency value for the member Sales is U.S. dollars., if I have a property group for account dimension, how could I display the value of group for all the account number?

    Hi
    you just use EVPRO like you mentioned:
    =EVPRO(Finance,$D20,group)
    In the cell $D20 your account number is displayed. You copy this function down for each account.
    -> just create an input schedule or report from a template, open the configuration panel. There you see this principle used for property High Level, Calc, ...
    D
    this method is perfect but you need to add the formula each time.
    I would prefer to use the formula using the after or before range in expansion options of evdre which would make it dynamic and you need not copy paste the formula to derive the property each time.
    Cheers
    Thanks and Regards
    Harish B K

Maybe you are looking for