Any way to increase HD capacity on the iMAC?

Is there any way to upgrade the internal HD on the iMAC to say about 500GB and transfer all data from the installed drive? Thanks. Dave Wilson

PilotDave1,
You can take your machine to an AASP that will upgrade the internal HD for a fee. However I'd recommend at least a 1TB HD, the cost from 500GB to 1TB should be minor. You will need to contact one in your area, ask if they perform the service and how much it would cost. Make sure you let them know you want to migrate everthing that is on the old HD onto the new HD. You can locate a AASP in the US by clicking the Apple Authorized Service Provider Locator. If you are outside the US you should start with Apple Online Service Assistant. If your machine is a late 2009 or later iMac make sure you let the AASP know, this is critical because Apple began using different internal HD's then. Those drives come with integrated temperature sensors. If they do not install the correct HD this could cause an overheating issue.

Similar Messages

I have 15,686 photos on iPhoto 11 and am now, when uploading latest photos, getting a message saying that my startup disk is full. Is there any way of increasing the capacity of the start up disk?

I have 15,686 photos on iPhoto 11. As I've been uploading the latest photos in the last two days I've been getting a message stating that my start-up disk is nearly full. I had no idea there was a limit. Is there any way of increasing its capacity? I have been shooting in Raw of late and I know it takes up a lot of space but I have heard of other people who have over 20,000 photos on their computers, so what is going on here??

Two possibiilities here:
1. Your start up disk is nearly full
Or
2. You have minor damage to the iPhoto Library and it's giving you a bogus message.
But here's the thing: A full start up disk is a very serious issue and needs to be dealt with fast.
So, how big is your Hard Disk? How much free space on it?
Regards
TD

Is there any way to increase the font size in the Creative Cloud. Using a Lenovo Yoga 2 with 14" screen and care barely see the menus

Is there any way to increase the font size in the Creative Cloud. Using a Lenovo Yoga 2 with 14" screen and care barely see the menus.

In short, no. There is no fix yet. They only barely acknowledge there is a problem. The "fix" is to enable 200% UI scaling which makes everything comically huge and unusable. This is pretty much of a joke. A really, really EXPENSIVE joke.

Is there any way to increase the 5 computer limit for Home Sharing?

We now have 9 computers all looking to access the same media purchased / stored on the same iTunes library? Is there any way to increase beyond the 5 computer limit?
Our home setup includes:
2 iMacs
2 MacBooks
3 Mac minis
2 Home Theatre PCs

Can't offer any help, only tell you that I'm also wondering this as we now have 11 computers in our home.

My loudspeaker are very low (switched to max) any way to increase the volume. (IPad 1)?

are very low (switched to max) any way to increase the volume. (IPad 1)? [email protected]

Never mind. I see. Siri simply has it's own volume and you can adjust it while in Siri itself. It was set low by default.
doug

Siri volume seems low - any way to increase it?

I just got a new iPhone 5 today and am trying Siri for the first time. It seems to work ok, but the volume of Siri's voice seems quite low to me.
The speakers on the iPhone 5 itself are ok because I can play music in iTunes very loudly, so it's not the general volume settings or the speakers. It seems to be just Siri's voice.
Is there any way to increase Siri's voice volume?
Thanks,
doug

Never mind. I see. Siri simply has it's own volume and you can adjust it while in Siri itself. It was set low by default.
doug

Any way to increase font size in RoboHelp UI?

Hi. Is there any way to increase the font size of the text in the RoboHelp (11) UI itself, that is, for example, the items that appear in the Project manager, Topic List, Single Source Layouts, and other panels?
I have my monitor set to optimal resolution, but this seems to cause this text to be too small for comfort. Is there a way to increase the font size from within RH? If not, is there a Windows-level change I can make?
Thanks!

Thanks, Peter. Yes, that's what it appears to be. So, in messing about with the screen resolution and text size settings on my new Windows 7 machine, I somehow irritated RoboHelp. This is what it looks like:
I got responses from Adobe person assigned to my bug request. He said all was OK on their side. He said to try to change the Custom DPI text size for my machine, but that did not change the RH display, only the toolbar and pod headings. He suggested I uninstall then reinstall RH 10.
I also asked what the difference was between the RH source files that present the toolbar and that retrieve the project files as listed (includes the Single Source Layout pod entries also, though). We'll see.
Have a feeling I'll have to reinstall.
Thanks for all your help.
Susan

URGENT: Is there any way to increase no of "Color Lables"?

Hi there,
Is there any way to increase no of "Color Lables" and the "Rating" in LR?

There are many other ways to designate "categories" instead of color labels and stars. Keywords come to mind. Smart collections also do the job to designate where you are in your workflow.

Any way to increase screen size?

Hello - is there any way to increase the size of my webpage display? I know I can reset the font size, but is there any way to actually increase the size (other than just hitting the green button in the upper lefthand corner)?
Thanks!

http://discussions.apple.com/message.jspa?messageID=4103472#4103472

Any way to increase BIS polling speeds?????

Is there any way to increase the polling speed of the BIS for Earthlink? I have a mindspring email account (Earthlink) and it doesn't get pushed instantaneously to me. It usually just pulls a group of emails every 15 minutes or so. My other email account pushing to my BB Tour from my GoDaddy accounts come right away. Help anyone??

No, there is not.
A 15 (roughly speaking) cycle is routine on POP accounts. You can't change that. If the RIM servers find new mail, it reverts to 2 minute polling for a couple of cycles and should it find new mail yet again, retains that 2 minute polling cycle until which time it doesn't find new mail waiting, and then reverts back to the 15 minute cycle.
1. If any post helps you please click the below the post(s) that helped you.
2. Please resolve your thread by marking the post "Solution?" which solved it for you!
3. Install free BlackBerry Protect today for backups of contacts and data.
4. Guide to Unlocking your BlackBerry & Unlock Codes
Join our BBM Channels (Beta)
BlackBerry Support Forums Channel
PIN: C0001B7B4 Display/Scan Bar Code
Knowledge Base Updates
PIN: C0005A9AA Display/Scan Bar Code

Is there any way of undoing a shuffle? The CDs I downloaded to iTunes have all been shuffled. As most of these are classical, it is inappropriate to have them separated into songs that play any old time. Can I restore them to the original albums?

Is there any way of undoing a shuffle? The CDs I downloaded to iTunes have all been shuffled into individual 'songs'. As most of these are classical and folk, it is inappropriate to have them separated into songs that play any old time (ie, a movement from Beethoven's 5th symphony followed by a folk song followed by one excerpt from Vivaldi's Four Seasons, etc. Can I restore them all to the original albums and make sure the shuffle doesn't happen again?
Thanks!

goldberry wrote:
Thanks! That has worked, but only partially - there are still some Beethovens mixed in with the Vivaldis. I'm sure I installed these as total albums.
I have noticed that too from time to time, I generally move the files into the correct folder and fix the index in itunes when one won't open, occasionally.

My itunes account was disabled for some reason. I changed password in iforgot and still didn't work. I could log in but not make purchases from the store so I set up a new login/account . Is there any way to move my music to the new account?

My itunes account was disabled for some reason. I changed password in iforgot and still didn't work. I could log in and see my music but not make purchases from the store or even redeem an itunes gift card so I set up a new login/account with another email account of mine. On the new account I can redeem my gift card and download items onto my ipad2. Is there any way to move my music to the new account?

Launch the Console application in any of the following ways:
☞ Enter the first few letters of its name into a Spotlight search. Select it in the results (it should be at the top.)
☞ In the Finder, select Go ▹ Utilities from the menu bar, or press the key combination shift-command-U. The application is in the folder that opens.
☞ Open LaunchPad. Click Utilities, then Console in the icon grid.
Make sure the title of the Console window is All Messages. If it isn't, select All Messages from the SYSTEM LOG QUERIES menu on the left. If you don't see that menu, select
View ▹ Show Log List
from the menu bar.
Click the Clear Display icon in the toolbar. Then try the action that you're having trouble with again. Select any messages that appear in the Console window. Copy them to the Clipboard by pressing the key combination command-C. Paste into a reply to this message (command-V).
When posting a log extract, be selective. In most cases, a few dozen lines are more than enough.
Please do not indiscriminately dump thousands of lines from the log into this discussion.
Important: Some private information, such as your name, may appear in the log. Anonymize before posting.

Any way to play two clips at the same time one over the other? (transprent)

Any way to play two clips at the same time one over the other? (transprent)

Yes.
See the information here for a variety of ways to do this:
http://discussions.apple.com/thread.jspa?threadID=933500&tstart=50
http://discussions.apple.com/thread.jspa?threadID=903151&tstart=0
http://karsten.schluter.googlepages.com/jackiechancredit
http://www.geethree.com/slick/V_04.html

I sent in my iPod nano to the replacement program about two weeks back. However, I checked the status of the repair and it still says it has not been received yet. Is there any way to follow up on where the nano could be? I sent it via FedEx.

I sent in my iPod nano to the replacement program about two weeks back. However, I checked the status of the repair and it still says it has not been received yet. However, my boyfriend sent in his the same time I did and his repair status says repair being diagnosed. I still have the "receipt" of the package when they first sent it to me. I sent it via FedEx. Is there any way to follow up on where the nano could be or maybe find out if I can still get a replacement even though my nano might be lost in transit?

I sent it via FedEx.
Call FedEx. They will be able to track their own packages. They will let you know if your iPod Nano was delivered and to who!

The CC control panel use to show my 4 applications CC, CS6, LR5 and Bridge, now LR5 is no longer showing up. I pay for the photographer bundle, which includes LR5 and CC, why has it been dropped off? Is there any way to bring it back in the panel, because

The CC control panel use to show my 4 applications CC, CS6, LR5 and Bridge, now LR5 is no longer showing up. I pay for the photographer bundle, which includes LR5 and CC, why has it been dropped off? Is there any way to bring it back in the panel, because in the listed applications which can be added below it is not listed. Thanks!

If you're a paying Creative Cloud member, you may not see Lightroom in the Creative Cloud if your computer doesn't meet the minimum system requirements. Check to make sure that your system meets the minimum requirements for the latest release of Lightroom.
If you're using a trial version of Creative Cloud, the Lightroom trial is not available through Creative Cloud. It is, however, available as a stand-alone trial. See Install Lightroom trial | Creative Cloud membership.
Please refer to : Lightroom and Creative Cloud FAQ
Regards
Rajshree

Any way to increase HD capacity on the iMAC?

Similar Messages

Maybe you are looking for