Any way to insert the XML generated from dataTable into the oracle?
Hi guys,
I want to know if there is a way to insert the XML generated from dataTable(dataTable.GetXML()) into the oracle?
Thanks in advance,
There is o extractor to load assessment cycles; instead you can load dtaa after the assesment cycle is complte in R/3. You can schdeule the job in BW accordingly.
May I know what exactly is the requirement.
Ravi Thothadri
Similar Messages
-
Is there any way to insert a pop up calender and tick boxes into pages on the ipad? And if not if I do it on a mac will the document work on pages on the ipad? I'm trying to set up a document with quick check boxes to tick and a date to choose rather than type? I know it possible to do it on pages on a mac but i haven't been able to find anything on the ipad to create such a thing, and I don't know if it will work on the ipad if I create it on the mac
RGA,
Unfortunately, I do not believe that it is possible for a DAQ board to generate an AI Start Trigger from an analog trigger, but not be triggered itself until it receives a digital trigger.
Spencer S. -
Any way to validate the Mandatory field in the XML file
Hi,
Is there any way to validate the Mandatory field in the XML file. I created an xml type table xml_validate based on the schema and insert the XML files with statement.
INSERT INTO xml_validate(warehouse_id,xml_file_name,warehouse_spec)
Values (agreementid,p_filename,XMLTYPE.createXML(l_clob));
It is validating the data types, extra tags etc but not validating the missing of the manadatory tag/value.
Thanks in advance
RizlyHi Ants,
Yes, I was not doing the strict validation, after searching the forum i understood that was the reason. So i did this way,
begin
for x in (select myColumn from myTable where WAREHOUSE_ID=41) loop
x.myColumn .schemaValidate();
end loop;
end;
The out put is:
ORA-31154: invalid XML document
ORA-19202: Error occurred in XML processing
LSX-00011: internal error: LsxvPushCandidate array overflow
ORA-06512: at "SYS.XMLTYPE", line 345
ORA-06512: at line 3
My i know more information about this error, especially
LSX-00011: internal error: LsxvPushCandidate array overflow
Thanks in advance
Rizly -
Is there any way to collect the file list from UTL_FILE_DIR.
I expect the use "Oracle supplied package UTL_FILE" to import our customer order shipments to table by XML format files. I already did the procedure to import one XML file into Table by DBMS_XMLSave.insertXML and UTL_FILE. GET_LINE. And it did work.
My question is :
Is there any way to collect the file list from UTL_FILE_DIR. (I put all import XML files into `/usr/tmp?, I want to get all file names from this folder and feed them into UTL_FILE.FOPEN.)
Thanks in advanceUTL_FILE_DIR is a very dangerous and deprecated parameter. Oracle very specifically recommends not using it. You should be using directory objects instead.
As for doing a directory listing, you can use Java stored proc. External procs/functions are not required.
The following sample shows how to use such a Java stored proc to insert the result of a directory listing into a session temporary table:
create or replace and compile java source named "ListFiles" as
import java.io.*;
import java.sql.*;
public class ListFiles
public static void getList(String directory, String filter)
throws SQLException
File path = new File( directory );
final String ExpressionFilter = filter;
FilenameFilter fileFilter = new FilenameFilter() {
public boolean accept(File dir, String name) {
if(name.equalsIgnoreCase(ExpressionFilter))
return true;
if(name.matches("." + ExpressionFilter))
return true;
return false;
String[] list = path.list(fileFilter);
String element;
for(int i = 0; i < list.length; i++)
element = list;
#sql {
insert
into directory_list
( directory, filename )
values
( :directory, :element ) -
Is there any way to prevent web.xml from any change ?
hi all,
we have a filter in web.xml. Now we want to prevent it from any change in future. I mean after making a war(EAR) no one can change the filter in web.xml. if he chaged it then he will not be able to re deploy the application.Right now it is in web.xml so one can easily change it and then he can redeploy the application.
Is there any way to prevent web.xml from any change after making EAR(WAR)?
One can easily make a change in web.xml and redeploy the application to get the result. Now we want to restrict the web.xml as java class for any change after making EAR(or WAR).
Could some one help me to do this?
thanks,
dineshI think you could use some third party software to lock the folder like FolderLock, just make sure others ppl cannot access your file should be fined.
This is my stupid solution only,cheers. -
Is there any way to prevent web.xml from any change like java class?
hi all,
Is there any way to prevent web.xml from any change after making EAR(WAR)?
One can easily make a change in web.xml and redeploy the application to get the result. Now we want to restrict the web.xml as java class for any change after making EAR(or WAR).
Could some one help me to do this?
thanks,
dineshhi,
Not at development level. We want it after deploying the application on server .
We want to create it (web.xml) at tomcat startup (or in any other web/app server ) before loading any context.
Is there any way to run a simple java class(not servlet) on tomcat startup(before initializing the contexts)?
Message was edited by:
DP_java
Message was edited by:
DP_java -
What is the simplest way to get a xml-file from 10g R2 -database ?
Hi,
I'm new in xml, there are so many tools to work with xml:
what is the simplest way to get a xml-file from 10g R2 -database ?
I have : 10g R2 and a xsd.file to describe the xml-structure
thank you
NorbertThere is no automatic way to generate XML documents from an arbitary set of relational tables using the information contained in an XML Schema. Typically the easiest way to generate XML from relational data is to use the SQL/XML operators (XMLElement, XMLAGG, XMLAttribtues, XMLForest). There are many examples of using these operators in the forums You can validate the generated XML against the XML Schema by registering the XML Schema with XML DB and then using the XMLType.SchemaValidate() method
-
Is there any way to prevent the OS from querying the Superdrive when start
Just a random question. Whenever my MacBook Pro starts up (either from sleep or a complete/fresh start, the OS queries the drive slot to see if there is a disc present. While this may be normal behavior, it seems to slow down the start up process. (I rarely ever have a disc in the drive). Just curious if this, in fact, normal, or if there's something awry.
Is there any way to prevent the OS from querying the Superdrive when start
No
he OS queries the drive slot to see if there is a disc present.
How can you tell? Based on the noise it makes? -
Is there any way to make the sent folder in mail list emails "to" instead of "from"
Is there any way to make the sent folder in mail list emails in the "to" order instead of "from".
Sure open Sent folder.
Just above first message is an icon titled Sort By Date followed by a downward pointing arrow.
Click on the arrow and select "To" from the list.
Allan -
Is there any way I can view / remove pictures from Camera Roll on the iPhone, on a Mac, without actually importing the files? I just want to view / delete files without importing them.
For instance I have 1200 photos on my iPhone Camera Roll. Some of these are shots, that I've taken multiple times, some good, some bad. I just want to clean up my Camera Roll, but going through the pictures on the iPhone's small screen is tedious. I'd much rather look at the camera roll's photo's on my Mac, and then decide which files I'd like to keep, and which to delete.
I don't want to import the files, as when I import the files, and delete them from Camera Roll, now the Photo's are not on my phone, and the only way to get them back on my Phone is to Import them back in using iTunes, and then they go into the Picture Library and not the Camera Roll.
In the same way as I can view Pics from my digital camera's SD card on a Mac without having to actually copy them to my computer, is there any app out there that will let me view my iPhone pics without importing them.gsharp01 wrote:
Is there any way I can view / remove pictures from Camera Roll on the iPhone, on a Mac, without actually importing the files? I just want to view / delete files without importing them.
The short answer is yes.
Connect your iPhone to your computer.
Open Image Capture application.
Click on the 4 little squares at bottom to view them as photos, not a list.
Select the photos them click the No Entry icon at bottom to delete. -
Is there any way to export IT Resource data from OIM using the export tool?
Hello,
we are trying to migrate an OIM development environment to a preproduction environment and we need to migrate more than 400 IT Resources. We have exported some IT Resources and when we imported them in the preproduction environment their data was not migrated. Is there any way to export IT Resource data from OIM using the export tool? Or is there any other way to do this without doing it by hand?
Thank you for your help
Kind RegardsWell , OIM doesnot provide any such facility to export ITResource data along with ITResource .
Directly updating the DB could be an option ..
Thanks -
i live in a home with two other people, and one housemate tried to sync up his content from iTunes and iCloud onto another housemate's new iPad. the iTunes library only contains my content. is there any way to retrieve the other person's iCloud? Can they go out of my account? Their content is saved on their iPads, but can another iCloud be on the same home computer?
The syncing of music is one way, computer to phone. See this helpful document from a fellow user. Credit goes to the author.
https://discussions.apple.com/docs/DOC-3141 -
Is there any way to prevent the copying of text from Presenter's Notes tab?
PowerPoint Notes Page text exposed on a Presenter Notes tab can be selected and copied from the Notes tab and then pasted into any text document. Is there any way to prevent the copying of text short of not providing notes text at all?
Hi Robingo,
Excel is strictly treated as a data source and Siena only imports the data in your tables, not the formatting.
If there is some business logic behind the formatting, you could mimic the same logic in Siena. For example, the font is bold or red if a value is in a certain range, the font is in italics if the data is for a specific customer, etc.
Thanks
Robin -
So all my tasks are nicely laid out in my SSIS Package. Now I want to go add a blurb to the Name to make it a little more descriptive. When I do that, Microsoft Visual Studio just automatically re-sizes the task so the entire description, name fits. When
I make it the right size, my scripting name is wrapping and that's the way I want it to look within my Package. Is there any way to stop Microsoft Visual Studio from automagically adjusting the size of my task when I click on the Name to edit?
Thanks for your review and am hopeful for a reply.There is no way. The designer canvas received improvements in SSIS ver 2012, but this specific aspect remain unchanged.
What I do I simply use the Format -> Autolayout -> Diagram or you can also/instead Ctrl-A to select all and choose "make same size"
Arthur
MyBlog
Twitter -
I lost the music on my pc when I had to reformat the disk. Is there any way to transfer the music from the Ipod to the pc? I am told that if I try to sync the music that it will erase all the music on my Ipod.
Transfer iTunes purchases by:
iTunes Store: Transferring purchases from your iPhone, iPad, or iPod to a computer
Transfer other music by using a third-party programlike one of those discussed here:
Copy music from Ipod to new computer...: Apple Support Communities
You can also rredownload mos iTunes purchases by:
Downloading past purchases from the App Store, iBookstore, and iTunes Store
Maybe you are looking for
-
Error message when installing over existing software.
I built a LabVIEW installer that basically only installs the DAQmx drivers. This installer installed DAQmx 8.5. Because of the need to include a LabVIEW app with our software, I have rebuilt this installer and it now installs DAQmx 8.6 as well as the
-
Display data of query in Analysis Process Designer mismatch query result
Hi experts, I am having an issue with APD.when ii am display data of the query in apd i am having wrong values for key figures. any solutions? Thanks
-
JRockit out of native memory errors - what effects native memory usage
I've seen postings which suggest a way to combat out of native memory errors is to reduce the heap size. That is fine but if you have some parts of your application which run fine and others that run the system out of native memory almost immediately
-
Calling a custom Infotype field in Time Management PCR
Dear All, I need to read a custom Infotype field in TM PCR to read the individual leave entitlement. In my organization there is no employee group wise or Personnel Area wise fixed entitlements for leave. Leave entitlement varies individual to indivi
-
It always keeps on asking of my Visa card.
I am having a great deal of problem creating an apple ID for my bro. They always keep on asking of my Visa card number. I try to follow the procedure I used in creating my but it does not work. The none button which use to appear no longer appear. C