Any way to mass compile to previous version?

I have 7.1.1 and want to mass compile a directory to 7.1.
Thanks.

JICHFI wrote:
«When you open a VI last saved in a previous version of LabVIEW, LabVIEW automatically converts and compiles the VI. You must save the VI in the current version of LabVIEW or the conversion process, which uses extra memory resources, occurs every time you access the VI.»
Read your quote and the question again. Your quoted section talks about what happens if you open a VI that has been saved in a previous version in the current version, i.e. open a lower version in a higher version.
This discussion talks about going from a higher version to a lower version. This is 180 degrees different.
The quote is not relevant to this discussion!
JICHFI wrote:
So I don't know who you are but I think that ...
I don't know who you are either except what is visible in your profile... It should not be relevant wo I am.
JICHFI wrote:
Save for Previous version does something with mass compile, this above VI opens recursively a bunch of VIs and save all of them to the desired version with the same filename.
Save for previous has nothing to do with masscompiling!
Masscompiling takes an existing folder full of VIs and converts them to the current version, overwriting the old versions in the process.
Save for previous creates a new folder containing new copies of all relevant VIs downconverted to the target version. Often, especially in order versions, the downconverted VIs need to be compiled again the first time they are opened in the old version (you would see something like "VI converted from 7.1 to 7.1"). They are NOT masscompiled. To fix this, you could use the previous version to masscompile the downconverted folder, or you could just do a "save all" the first time after opening in the old version. This has nothing to do with the question.
All this discussion is irrelevant because it is NOT possible to save as 7.1 from 7.1.1. They are fully compatible.
Since the original question does not make sense, we need further information from the OP.
LabVIEW Champion . Do more with less code and in less time .

Similar Messages

I made the mistake of upgrading to the truly dreadful latest version. Is there any way of reverting to the previous version?

I made the mistake of upgrading to the truly dreadful latest version. Is there any way of reverting to the previous version?

No.

Is there any way to revert to the previous version of Firefox.

when i try to open my webmail, using the appropriate password i get the following message: https://webmail.primus.ca/parse.php?file=html/english/xp/xp.html&frame=1
I'd hardly find it necessary to contact the web provider, except for that, so i'd be content to go back a step to be able to NOT have to use Internet Explorer just to check email when i'm on the road

This is a Thunderbird forum. Are you actually asking about Thunderbird or really about Firefox?
In both cases, the answer is pretty much the same; go to the site (below), drill down to the version you want, on the platform you use (windows/mac/linux), in the language you use, and download it, then run it.
There is no need to uninstall the previous version.
Thunderbird email: https://ftp.mozilla.org/pub/mozilla.org/thunderbird/releases/
Firefox browser: https://ftp.mozilla.org/pub/mozilla.org/firefox/releases/
I think most "usability" issues with Thunderbird would be addressed by using TB v24.6. I'm not so sure what would have changed in Firefox to annoy you. ;-)

Delayed response of when moving objects in diagram and panel, happend in LV 6, only for vi's compiled from previous versions. any suggestions?

When I using the mouse to select portion of the diagram or the panel, or when I moving objects- I found that in all the vi's that I compiled from former versions of labview- there is a delay of close to a second to the actual selection or movement of the item. This happens in 2 machines out of 5 that I tested it, and it happened both in windows 2000 and in windows 98. any suggestions?

Sometimes a video driver issue. Update your video driver.
Or turn down the video driver hardware acceleration. Right-click an
empty area of the desktop, choose the Settings tab, choose the Advanced
button.
The location of this differs in different versions of Windows.
Win2000: go to Troubleshooting, and turn down the slider for hardware
acceleration.
Win98: I think it's on another tab.
Mark
ilan wrote:
>
> Delayed response of when moving objects in diagram and panel, happend
> in LV 6, only for vi's compiled from previous versions. any
> suggestions?
>
> When I using the mouse to select portion of the diagram or the panel,
> or when I moving objects- I found that in all the vi's that I compiled
> from former versions of labview- there is a delay
of close to a second
> to the actual selection or movement of the item. This happens in 2
> machines out of 5 that I tested it, and it happened both in windows
> 2000 and in windows 98. any suggestions?

Is there a way to revert to the previous version of the podcast app?

I really hate the new podcast app version 1.2.1. There has to be a way to revert to the previous version. Don't know why Apple doesn't offer it's users the option of staying with the version that we prefer. We're asked to update without knowing if we'll like the new version. No trial period - just take a chance. I did, and I regret it. I will never click on an update again. I went from loving Apple to hating them overnight.
There must be a work-around somewhere. Please help if you can.

Thanks for the response. Not sure if it's backed up, and not sure how to locate if it is. I downloaded the update directly onto ipod touch - and when I re-synched apps from itunes library to try to install previous ver. it changed to the new podcast ver. 1.2.1. Several moths ago I reverted to an older v. of itunes library(10.0?) through a folder called "previous itunes libraries" in my itunes folder - but I don't remember what I did - someone instructed me. Any chance of that containing older podcast v?
Unfortunately I'm not too tech savvy

Is there any way to re-install an older version of pages on my computer? The new version lost a lot of the templates I enjoyed using...

Is there any way to re-install an older version of pages on my computer? The new version lost a lot of the templates I enjoyed using...

If you previously had iWork '09, those apps are still in your Applications folder in a folder named iWork '09 unless you deliberately deleted them.
If you did delete them & have a Time Machine backup that includes your Applications folder you can restore them from there. In the past the iWork apps have not worked well when copied from another drive, but some users have reported that this works for them, especially if the apps were originally purchased from the Mac App Store. If you originally installed them from the retail disk, find the disk & reinstall them & then update to iWork 9.3.

Is there any way to revert to an older version of iTunes?

GoodReader (an iOS app) has a 32 bit windows program (GoodReader USB) that allows easy drag and drop transferring of folders and files between my windows computer and my iPad.
Upgrading to the newest 64 bit version of iTunes disabled the GoodReader USB transfer program. The program doesn't think iTunes is installed (because it only works with the 32 bit version). GoodReader hasn't upgraded the transfer program yet and I've been told they might not. I use this program several times per week and it's a hardship to lose its functionality.
I uninstalled iTunes, downloaded a 32 bit version of iTunes and tried to install it. Unfortunately, the install doesn't work. The install program essentially insisted that I needed the 64 bit version. I've reinstalled the 64 bit iTunes 12 for the time being. Is there any way to revert to the last version of iTunes that was running on my computer. Alternately, is there another iOS app (similar to GoodReader) with as good a USB transfer program that lefts me drag and drop folders and files onto my iPad?

Try iTunes 12.1.0.71 for Windows (64-bit - for older video cards) - itunes64setup.exe (2015-01-28)
which is a 64-bit installer for the 32-bit version of the core application, similar to previous 64-bit releases.
You may need to fully uninstall all Apple components before switching. If you run into problems see Troubleshooting issues with iTunes for Windows updates. Your library should be unaffected by these steps but there is backup and recovery advice elsewhere in the user tip. Also links to the previous build if required.
tt2

I accidentally hit "back-up" rather than "restore backup" when I got my new iPhone. Is there any way I can get a previous backup? or is everything gone forever?

I cracked my screen recently so I went in to the store to get a new one. Everything was going great until I hit the wrong button and now everything is lost. Is there any way I can get a previous iCloud backup on my phone?

You should be syncing your contacts with an app on your computer or cloud service (iCloud, Gmail, Yahoo, etc), and not relying on a backup. If you haven't been doing this, start now and then restore your old backup. You will then be able to sync the new contacts back into the phone. However, you will lose all messages, etc newer thant the backup.

I have an older version of Firefox 3.6.6 I believe I am having an issue with one of the websites I sign into. Is there any way to update to the newest version

I have an older version of Firefox 3.6.6 I believe I am having an issue with one of the websites I sign into. Is there any way to update to the newest version. Without losing all my bookmarks and saved pass words?

Hello johngervais, the latest firefox version is 26.0 (today 4 Jan 2014).
note that [https://support.mozilla.org/en-US/kb/firefox-no-longer-works-some-versions-windows-xp Firefox no longer works with some versions of Windows XP], if you have '''xp with sp2 and above''' you can update to latest version, see : [http://www.mozilla.org/en-US/firefox/26.0/system-requirements/ Firefox 26 System Requirements]
if you are able to update to latest version then see : [https://support.mozilla.org/en-US/kb/common-questions-after-upgrading-firefox-36 Common questions after upgrading from Firefox 3.6]
see also : [https://support.mozilla.org/en-US/kb/firefox-just-updated-why-it-asking-me-update-again Firefox just updated - why is it asking me to update again?]
Don't worry you won't losing bookmarks and passwords after update firefox.
thank you

Is there a way to go back to previous version of software as I don't like vers 1.1. Restoring it does not work and it turns off all the time after around 10 secs

Is there any way to go back to prvious version of software befoe 1.1 on ipod nano 6th generation. After update it switches off all the time after about 10 secs and I preferred it when I could listen to songs when in sleep mode without using too much battery power

Peter,
That was the problem. They were there, just not properly linked. I used the one I completed in CS6 trial version (after preflight). When I exported that one and opened it in CS5 all was good. I think I will make the upgrade as soon as I can afford it, but at least now I can make the system work for my needs. Thank you for your help!

Is there any way to mass delete duplicated files?

I just transferred all of my brother's music from his full laptop onto my desktop.
Unfortunately, since his girlfriend had her own library, and since none of us were careful to keep track of where the files were kept, I now have several hundred songs that have been duplicated twice or even three or four times on a single library.
Is there any way to mass delete all the duplicated songs, so I only have one of each track?

Have a look at Teridon's iTunes Scripts there's a script in there for dealing with duplicates: Teridon's iTunes for Windows Scripts

Is there any way to get an older app version of apple tv remote?

It's been several months since the apple tv remote app was updated to 3.0+.
Once I updated, I have not been able to control my apple tv (2nd gen).
I have 2 ipod touch (2nd gen as well) and neither can use the updated app to control our apple tv any more.
We've had to resort to using the aluminum remote (which we constantly are losing)
Long story short. Is there any way to get an older version of the app (say 2.4)? I've looked everywhere but everyone links back to itunes (and that only has the latest version). We're also stuck on iOS 4.2 because of hardware. There are a couple of sites out there but it seems that they are not legit as they ask for credit card info.
Any help is appreciated.

You can only do so if you downloaded a previous version at some point in the past, and it's still in the iTunes library on your computer. If that version is updated too, maybe the old version is in Trash/Recycling Bin.

Is there any way to Mass upload documents in Documents of Record.

Hi,
Can any one help me if there is a way to mass upload documents for 200 employees at a time in to Documents of Record
Thanks & Regards
Damodhar

There is some code for the same on the page -
http://www.oraclebusinessapps.com/2008/04/28/load-pdf-file-attachment-using-api/

Is there any way to upgrade to a newer version of os x snow leopard if my computer isn't compatible with mavericks?

Is there any way to upgrade my software version? I've tried downloading java or upgrading it and it won't let me because my software isn't compatible. I was ready to install Mavericks when all of the sudden my computer isn't compatible with OS X Mavericks. Does anybody have any solutions besides buy a new computer?

If your computer isn’t compatible, you might be able to upgrade to Lion.
Computer Compatibility - Lion                       Lion
Check to make sure your applications are compatible. PowerPC applications are no longer supported.
Application Compatibility
You can also check which applications are PowerPC by going to the  menu, select About this Mac, click on More info…, then click System Report and select Software/Applications.
If you have applications that you want to use that aren’t compatible, you can retain Snow Leopard and create a new partition to install Lion on or you can run Snow Leopard server in a virtual mode.

Is there any way to make Mail forget previous search terms?

When I search for a mail starting with say, the letters 'and' it finds every email to, from or whatever associated with those three letters. However, it includes, in the cases of to or from, old email addresses that are no longer in 'Contacts' and or have bad memories for me. Is there any way to make 'Mail' forget those email addresses completely?
This is not or does not seem to be the same as removing an email address from the previous recipient list.
Thanks.

Hmm. This removes the recipient only in such a way that when I type the first 3 letters of an address in a new email, that particular recipient does not appear.
However, if the same first three letters of the addressee's name are typed in the Mail search function, the previous recipient's email address is still offered as an option. So I am afraid this does not help.
Removing a previous recipient's email address is apparently not the same as making the Mail application forget a particular email address.

Any way to mass compile to previous version?

Similar Messages

Maybe you are looking for