Any way to monitor "task agents"?

Forte system agents only seem to go down to the resolution of
partitions, each of which may be actually be running multiple tasks. I
have an application with several concurrent event loop tasks, all within
the same partition, which communicate asynchronously using Forte events.
My problem is I have a very slow (many hours) memory leak which doesn't
seem to be tied to any of my application objects. I suspect that one of
these tasks may be "stuck," causing it's event queue to grow -- slowly
-- until the partition is finally wiped out with an "out of memory"
exception. I would love to be able to monitor the sizes of these event
queues over time for the individual tasks, but with all posting and
receiving happening inside a single partition, I don't believe I ever
come in contact with the partition's distributed object or communication
managers. The TOOL hook via the TaskHandle sounded promising, but seems
to yield very little diagnostic information.
Anybody know of a way to monitor intra-partition event traffic?
Thanks!
- Mark
====================================
Mark Atchison <[email protected]>
Sr. Systems Developer, Metatec Corp.
7001 Metatec Blvd., Dublin OH, 43017

Several options come to mind.
Have your child use the iPad only with adult supervision if they cannot be trusted to use in the way you wish.
Delete the games from the iPad and set restrictions so that apps cannot be downloaded.
Use Guided Access to restrict them to the one app you want them to be able to use.

Similar Messages

I think ATT is screwing me. Is there any way to monitor my MB usage?

I see odd charges like 50MB when I am sure I was not using my phone. Certainly, I would remember using 50MB, that is watching roughly 50 min of video.
So, is there any way to monitor my usage on the iPhone? Some log that breaks down the usage by minute?
Thanks

I believe I may have found the culprit for me... It's one of two things - not sure which one (maybe a combination of both) since I did both at the same time. I just wanted to avoid data overnight, and not have to constantly turn off Cellular Data (if I didn't have to).
For 3-4 nights, I left Cellular data off, just to prove the data reported early morning wasn't data deferred from earlier in the day. Sure enough, if turning off Cellular Data overnight, no mysterious data showing up early morning.
Then I did these two things:
1) Plugged iP4 into iTunes, CTRL-click on iphone and do 'Reset Warnings', then CTRL-click again and hit 'Sync', and then the "would you like to send Apple crash reports, bla bla bla"... hit "Disagree"
2) go to http://oo.apple.com using your iPhone (http://support.apple.com/kb/HT4228)
After doing those two things, I started leaving Cellular Data ON over the last couple of nights.
Low and behold - at worst, 1-2MB overnight and that's from some emails that came in overnight. No huge 40-50MB chunks, or even 100+MB chunks which I've also had...
I don't know which of the two did it, or maybe a combination of both. I don't really care, all I wanted is to eliminate any "unapproved by ME" data being transferred overnight without my knowledge or consent. Seems to be working so far after two nights. Will continue to monitor obviously.

Any way to monitor my childs iPad experience

any way to monitor my childs iPad experience. She plays games instead of using iPad for school work. Is there a internal way to proceed

Several options come to mind.
Have your child use the iPad only with adult supervision if they cannot be trusted to use in the way you wish.
Delete the games from the iPad and set restrictions so that apps cannot be downloaded.
Use Guided Access to restrict them to the one app you want them to be able to use.

Several planning apps: any way to integrate task list?

We are working with 4 planning application environment and would like to make the process for users as smooth as possible. So instead of jumping from app to another, is there any way to integrate task lists (4 ones, each in different app) or to ease the navigation in workspace? We tried URL, but didn't work out....

i am afraid there is no way to create integrated task list, because every task list is connected with particular application.

Is there any way to monitor CPU temp without Dual Core Center

I hate Dual Core Center it has done nothing but lock my system up is there any alteranative to monitor CPU temp/Fan speed

Quote from: Maesus on 21-March-07, 23:34:06
I use speedfan... but for Core 2 Duo, I don't think I have to worry about the CPU temp anymore... they are really coooooooooooooll
Does anybody have an idea what the optimal temperature range for core duo cpu:s are? I used to have an Athlon XP, which was typically 65 °, now the my E6600 is running at 35-40 ° [celsius]. But where's the critical temperature where it burns?

Is There Any Way To Backup Tasks & Memos?

I have had some issues with Google calendar and have wiped my Pre and started over a couple of times. Once I get things working OK I want to make sure I can do a restore and get EVERYTHING back. I don't care if it is a several step process but it has to work. I thought I might be able to copy some files to my laptop while the Pre is in USB mode but I am not seeing any PIM files available.
Seriously, if there is no way at all to back up tasks and memos, then those apps on the Pre are useless.
Post relates to: Pre p100eww (Sprint)

Hello!
These 2 field are backed up via the backup process to your Palm Profile. Their not viewible from the servers but they are backed up. Just back sure that the Backup app is On to make benefit of this.

CUMP 8.5 - Any Way to Monitor Current SRU Utilizaiton?

We're in the pilot/test phase of a global MeetingPlace 8.5 deployment and would like to monitor node capacity utilization to see if I might need to add more to my cluster in my region. Is there a way for me to monitor SRU Utilization to see if I'm getting near node capacity as meeting attendees join?
THANKS!
Mike.

Hi Mike,
You can use the mbdstatus command, which usually takes a few seconds to update. Look for the
'UsedAudio =' which represents the SRU usage reported to the primary MBD. There are some other commands and details about them here:
http://www.cisco.com/en/US/docs/voice_ip_comm/meetingplace/8_5/english/administration/cli_application_server.html
Thanks,
Derek Johnson
Conferencing TAC

Any way to enable all Agents in 11G?

We're having a hard time upgrading our 10G BI_SCHED schema to the 11G BIPLATFORM schema. Honestly, the iBot history is not needed. However, on upgrading our RPD all iBots were upgraded to 11G agents but they are not enabled. Is there a way to bulk enable everything?

Check this
http://docs.oracle.com/cd/E23943_01/bi.1111/e10541/deliversconfigset.htm
Mark as correct if it is helpful.
Thanks,

Monitoring SMD Agent with CCMS

Hi gurues, I need to know if there is any way to monitor SMD Agent installed in an application server via CCMS CEN system on a Solution Manager.
Right now we have CEN Monitoring define on Solution Manager, and several SMD Agents over the whole landscape, and it is critical for us to get alerted when this SMD goes down, so we are thinking about monitoring through Solutin Manager, isthat possible or we must do it in another way?
Regards
Gustavo

It's so typical SAP; I was looking for exactly the same question. SAP changed from 7.1 the OSCOL to run by the host agent instance and will not install the OSCOL to the SAP instance. You also will not be able to download OSCOL separatly.
But OSCOL is needed to monitor processes on host side. If the host agent don't starts also the OSCOL will not start (on LINUX side) and so you are not be able to monitor the SMD process.
The only chance is to start the SMD via init script.
A better way would be to implement a GRMG availability monitoring; this can be implemented in the CEN system independent from the monitored host. In the first solution the host has to be create itself the basis to monitor itself... that's nonsense.
I absolutly don't understand why SAP always and everywhere ignore his own design concept and reinvent the wheel. It would be so easy to design and implement the availability moniroring on SAP development side but they don't have a focus on that. It is the same with SAP router connection via host agent to the CEN system. It was implemented as very last feature after a lot of disgruntled customers (administrators).

The monitor on my macbook is turned off while I was working, I could not in any way to do it again, I could see through the screen off the open pages I was working on, I had to turn off the machine and restart it. and it runs. O.O?

The monitor on my macbook is turned off while I was working, I could not in any way to do it again, I could see through the screen off the open pages I was working on, I had to turn off the machine and restart it. and it runs. WHAT 'success? The report says the console like this: (at approximately 12.30)
No receipt for 'com.apple.pkg.JamPackWorldMusicInstruments' found at '/'.
03/05/11 12:08:30 [0x0-0x1e01e]. Com.apple.garageband [239] No receipt for 'com.apple.pkg.JamPackWorldMusicInstruments' found at '/'.
03/05/11 12:08:30 [0x0-0x1e01e]. Com.apple.garageband [239] No receipt for 'com.apple.pkg.JamPackOneInstruments' found at '/'.
03/05/11 12:08:30 [0x0-0x1e01e]. Com.apple.garageband [239] No receipt for 'com.apple.pkg.JamPackOrchestralInstruments' found at '/'.
03/05/11 12:08:30 [0x0-0x1e01e]. Com.apple.garageband [239] No receipt for 'com.apple.pkg.JamPackRhythmSectionInstruments' found at '/'.
03/05/11 12:08:30 [0x0-0x1e01e]. Com.apple.garageband [239] No receipt for 'com.apple.pkg.JamPackRemixToolsInstruments' found at '/'.
03/05/11 12:08:32 MIDIServer [255] MIDIServer [255] starting; arch = i386
03/05/11 12:34:35 com.apple.launchd [1] *** launchd [1] has started up. ***
03/05/11 12:35:06 com.apple.launchd.peruser.501 [86] (com.apple.ReportCrash) Falling back to default Mach exception handlers. Could not find: com.apple.ReportCrash.Self
03/05/11 12:35:09 com.apple.launchd.peruser.501 [86] (com.apple.Kerberos.renew.plist [110]) Exited with exit code: 1
03/05/11 12:35:25 [0x0-0xd00d]. Com.skype.skype [127] WirelessAttach: IOServiceOpen error: e00002c7
03/05/11 12:35:25 [0x0-0xd00d]. Com.skype.skype [127] WirelessAttach: IOServiceOpen error: e00002c7
03/05/11 12:35:26 [0x0-0xd00d]. Com.skype.skype [127] WirelessAttach: IOServiceOpen error: e00002c7
03/05/11 12:35:26 [0x0-0xd00d]. Com.skype.skype [127] WirelessAttach: IOServiceOpen error: e00002c7
03/05/11 12:35:32 [0x0-0xd00d]. Com.skype.skype [127] WirelessAttach: IOServiceOpen error: e00002c7
03/05/11 12:35:33 [0x0-0xd00d]. Com.skype.skype [127] WirelessAttach: IOServiceOpen error: e00002c7
03/05/11 12:35:33 [0x0-0xd00d]. Com.skype.skype [127] WirelessAttach: IOServiceOpen error: e00002c7
03/05/11 12:36:06 com.apple.WindowServer [64] Tue May 3 12:36:06 MacBook-Pro-17-of-Admin.local WindowServer [64] <error>: kCGErrorFailure: Set a breakpoint @ CGErrorBreakpoint () to catch errors logged as They Are.
03/05/11 12:43:39 helpd [160] Response failed Because Listener can not find a port for this QueryID.
03/05/11 12:43:43 helpd [160] Response failed Because Listener can not find a port for this QueryID.
03/05/11 12:43:43 helpd [160] Response failed Because Listener can not find a port for this QueryID.

Do you have backups of all the data on the startup drive? If not, do nothing else until you've backed up that data, if you still can.

Any way to clean up all the monitor activities ?

Login in APEX Admin, under Monitor Activity page, I can view all kinds of report and activity. Those pages have a link that I can download those reports to CVS file. So I can archive those activities in flat file rather than storing in the database.
Okay...my question is: Is there any way to purge ALL the activity log ? I want to free some tablespace space since Oracle XE has limitation on the tablespace size.

Hello,
The activity reports you are talking about are based on a built-in view called APEX_ACTIVITY_LOG -
http://download.oracle.com/docs/cd/E14373_01/appdev.32/e11838/advnc.htm#CHDDHGJI . As far as I know you don’t have any control on how this view is working, and you can’t purge its data from within APEX. However, APEX is doing it for you, periodically, although I don’t know the exact time frame.
Regards,
Arie.
&diams; Please remember to mark appropriate posts as correct/helpful. For the long run, it will benefit us all.
&diams; Forthcoming book about APEX: Oracle Application Express 3.2 – The Essentials and More

I have 2 screens at work and 1 screen at home. I was working on a power point presentation on 2 monitors. My window is now "stuck" when I Power Point. I cannot drag it back to a display or find any way to move it back into my view. Help!!!

I have 2 screens at work and 1 screen at home. I was working on a power point presentation on 2 monitors with the presentation on monitor externally hooked up to my computer. My window is now "stuck" when I open Power Point. I cannot drag it back to a display or find any way to move it back into my view. Help!!!

Here is what worked for me:
My usb hub, being usb2, was too fast. I moved the wire to a usb port directory on my pc. That is a usb1 port which is slow enough to run your snyc.

Is there a way to monitor Time Machine's current backup task?

I started a second Time Machine backup to a NAS yesterday (in addition to my local TM Backup, which will now be taken offsite). It took a good 24hrs to finish, which was expected over WiFi. Since the initial backup, all the hourly backups have seemed normal...20-80 MB or so. Then all of a sudden this morning, I noticed the backup was taking longer than usual. I think it was indicating something around "1.09 GB of 1.09 GB", which seemed like a lot. I checked again, and the latter number had increased...something like "2.10 GB of 2.10 GB". I'm not running a VM, and there are no other obvious reasons the backup would be so big. I figured I'd let it go. I checked back again 30mins later and it was up to 69.1 GB of 69.1 GB.
So what's going on here? TM typically knows exactly how much it needs to backup before it starts copying files. Why would the latter number continue to go up, particularly when there's no obvious reason for the extra data to backup?
I tried opening the .inprogress pkg, but the folder size calcs weren't nearly fast enough for me to see where the backup was going. I tried the fseventer app, but it didn't seem very clear where files were being copied from; I could see where they were being placed, but since the backup is encrypted, backupd was writing to slices in the sparseimage, rather than an obvious hiearchy.
Is there a way to monitor the files that TM is currently backing up...say in real time? Is there a debug logging mode for the backupd? Or is there a log of the files that were copied in the last backup? I'd prefer to see this in real time, so that last option would be least useful.
I've poked through the great resources over at pondini.org, but nothing seems to really cover a backup that's in progress.
Thanks in advance for any tips or ideas.
p.s. I finally ended up stopping the really long backup; rebooted; restarted the backup manually, and this time it was a much more managable 500 MB. Additionally, I could see that during the final "cleaing up" stage, it removed the huge .inprogress file.

Choose Connect to Server from the Finder's Go menu, provide the first computer's IP address, log in, and set it up in the Time Machine pane of System Preferences.
(59008)

Is there any way to prevent my SSIS Tasks from reformatting themselves when I want to change the Name

So all my tasks are nicely laid out in my SSIS Package. Now I want to go add a blurb to the Name to make it a little more descriptive. When I do that, Microsoft Visual Studio just automatically re-sizes the task so the entire description, name fits. When
I make it the right size, my scripting name is wrapping and that's the way I want it to look within my Package. Is there any way to stop Microsoft Visual Studio from automagically adjusting the size of my task when I click on the Name to edit?
Thanks for your review and am hopeful for a reply.

There is no way. The designer canvas received improvements in SSIS ver 2012, but this specific aspect remain unchanged.
What I do I simply use the Format -> Autolayout -> Diagram or you can also/instead Ctrl-A to select all and choose "make same size"
Arthur
MyBlog
Twitter

Is there any way to activate the keep identity setting when using a Transfer SQL Server Object Task?

Is there any way to add the "Keep Identity" option to the tables selected for transfer in a Transfer SQL Server Object Task? It seems that would be very useful, yet I can't find an easily available setting for it. I would prefer to
accomplish this within the Transfer SQL Server Object Task since it can copy any new fields added to the source tables, as opposed to having to rebuild a custom Data Flow Task any time a table structure is altered. I thought setting "CopyPrimaryKeys"
to True would do the trick, but I found that only ensures that the column settings are transferred; when the transfer happens, the destination id column is populated based on the specified seed and increment value, not what's actually in the source table.
I'd like to point out that replication isn't really an option here. This is a package that runs a few times a day to keep some data on our website up to date with data in our protected corporate environment.

IIRW there is FastLoadKeepIdentity specifies
whether to keep an identity in OLEDB destination
Best Regards,Uri Dimant SQL Server MVP,
http://sqlblog.com/blogs/uri_dimant/
MS SQL optimization: MS SQL Development and Optimization
MS SQL Consulting:
Large scale of database and data cleansing
Remote DBA Services:
Improves MS SQL Database Performance
SQL Server Integration Services:
Business Intelligence

Any way to monitor "task agents"?

Similar Messages

Maybe you are looking for