Anybody got Tilp2 working? (Tool for connecting TI calculators to PC)

Hello^^
like the title says, I'm trying to get my TI v200 connected to the PC. But Tilp2 doesn't find the device. I'm using a silverlink (usb) cable and added
none /proc/bus/usb usbfs auto,busgid=108,busmode=0775,devgid=108,devmode=0664 0 0
to my fstab. But still no luck as root or user.
When trying to connect the v200, Tilp2 always shows:
Msg: failed to open the USB device.
Cause: Check that the USB cable is plugged in and that the calculator is turned ON! Also, check libusb and usbfs for valid permissions.
System: Unpassender IOCTL (I/O-Control) für das Gerät (errno = 25)
Anyone here who got it working?
thanks in advance
cl10k

I did. My calc is working.
What you need to do is to create a udev rule with the proper permissions for accessing the silverlink device. That's all.
I haven't my ti here, but get the product and vendor info from lsusb and set device permissions to 0660 or 0666 (it's up to you).

Similar Messages

  • I have windows vista. I have run the latest update from Microsoft. iTunes works except for connecting to the store. I have tried everything on line for suggestions. Nothing works.....please HELP!

    I have windows vista. I have run the latest update from Microsoft. iTunes works except for connecting to the store. I have tried everything on line for suggestions, going back on the update, allowing through in firewall settings, adding to trusted sites, disabling bonjour...Nothing works.....please HELP!

    I have also uninstalled and reinstalled iTunes

  • Has anybody got a labview driver for Lecroy 9410 ?

    Has anybody got a labview driver for Lecroy 9410 ?

    Unfortunately I was unable to find a driver for this instrument either. This leaves you with one of a couple options. First, I would like you to submit a request for this driver at:
    http://zone.ni.com/idnet/other.htm
    We develop drivers based on demand and popularity so the more requests we have for it, the greater the possibility that we will develop one.
    If you would like to try developing your own instrument driver (or modify the existing one), we have documentation, model instrument drivers, and driver templates to help at :
    http://zone.ni.com/idnet/development.htm
    We also have a syndicate of third party vendors that specialize in National Instruments' products and services. Some of the vendors specialize in driver development. I would sugges
    t contacting one of the Alliance members at:
    http://www.ni.com/alliance
    If you have any further queries, please let me know

  • Just started MobileMe.  Struggled with the setup of iCal but eventually got everything working fine for about a day.  Then I started receiving an iCal error message stating that the URL was wrong.  Of course, sync no longer works.  What is correct URL?

    Just signed up for MobileMe.  Had a little difficulty setting up iCal but eventually got everything working.  Whether posting to iCal on my Mac Book or iPhone, sync seemed to be working fine for about a day.  Then suddenly when I opened iCal on my Mac Book, I would receive the following iCal error message:
    "The calendar https://cal.me.com/calendar/calendar/principals/users/1.1117025442/ was not found on the server. Make sure the URL is correct."  I know where it is located but because I did not enter the URL when I set up MobileMe/iCal, I don't know what the correct URL should be.

    Mike,
    Welcome to Apple Support Communites.
    Review; MobileMe: Setting up iCal for the new MobileMe Calendar, and post back with further questions.

  • Publish for Approval - has anybody got this working?

    Hi guys,
    I just heard about Publish for Approval and thought I would take it for a spin. But I can't get it going.
    Whenever I start the publish for approval application it asks for questions which aren't in the notes. Like where is Aperture-Submit.acgi? I have tried selecting the acgi dispatcher, aperture itself and the publish for approval application. It doesn't seem to matter what you choose. It then presents the panel, you fill in the guff and hit publish. It then re-displays the preferences panel, set to Sharing and tells me on a different dialog box:
    Setup Error
    Use of Publish for Approval system requires that Personal Web Sharing be active.
    But it is!!
    The box is ticked and the status just above the stop button shows:
    Personal Web Sharing on
    I'm new to Apple but I am missing something obvious here?
    I think if the instructions said this was really complex and hard to do, I might feel a bit better. But it talks about how easy it is supposed to be.....
    Please help a frustrated user.
    Paul M

    I'm not using RAID or NFS. My startup drive is the standard 160GB SATA internal of a G5 formatted as Journaled HFS+.
    I have filevault activated on a 2nd account on this computer, but not on the active account.
    Publish was working with the above drive configurations. The only things that have changed since it was working is the uprade to Aperture 2 and a range of various software updates that came through after installing 10.5.2 and Aperture 2.
    I am using Time Machine, which I activated around the same time as I started using Aperture 2, which was when Publish stopped working. However, Time Machine is only set to backup the desktop, docs and music folders of my home account, plus a 2nd internal drive. But I thought it was worth mentioning.
    As I wrote in the email (to Sal), Publish doesn't fail right away for me, it happens after several images have been processed, then I get a -1700 applescript error.

  • HP 2510p WWAN (64bit) - has anybody got it working?!

    Hi
    I have an HP2510p with a WWAN onboard (03f0:171d). I googled it and tried different solutions (mostly ubuntu related) but haven't got any luck to get it going.
    Has anybody successfully installed a modem driver for that device? (64bit)
    Cheers
    Last edited by drd (2009-11-02 22:42:19)

    http://www.amd.com/us-en/assets/content_type/utilities/cpudriver.EXE
    thats for windowsXP,its what i'm using and works great
    enable Cool 'n' Quiet in bios make sure you processor ends in "letter O" or higher on lthe line with 13 characters
    then in windows set power management properties to "Minimal Power Managment"
    right clcik desktop - select properties,goto screen saver tab - click Power button,select Minimal Power Managment from drop down in power schemes box

  • Menu entry under 'Tools' for connecting Bridge with Photoshop gone after deleting preferences

    Hi, after I had problems with Photoshop HDR-Pro dialog not coming up, I deleted the preferences of both Brodge and Photoshop. Now HDR-Pro is working again, but just from inside Photoshop, not from Bridge. I don't see the menu entries under Tools to batch pictures in Photoshop. The tick in Bridge -> prefs -> start scripts -> auto collection cs5 is set. Actually I de-selected and selected, deleted prefs 3 times, it's still set now, but the menu doesn't show.
    The first time I deleted Bridge's prefs, the Illustrator menu was gone as well. After deleting the prefs again, de-selecting and selecting the Illustrator bits in the start scripts, it's showing again. Only Photoshop is still missing. I read this article
    http://forums.adobe.com/message/3941856#3941856
    but it didn't help - the start scripts are set correctly in Bridge's preferences, and I've deleted the prefs several times now.
    Can anyone help?
    The versions:
    Bridge 4.1.0.54
    Photoshop 12.1 x64
    Thanks in advance
    Dagmar

    The first time I deleted Bridge's prefs, the Illustrator menu was gone as well. After deleting the prefs again, de-selecting and selecting the Illustrator bits in the start scripts, it's showing again. Only Photoshop is still missing. I read this article
    Don't know what you mean with deleting prefs, did you use the option key to reset the preferences? or do you mean deleting the Bridge plist file from the user library preference folder.
    And in PS the same, did you use the key commands for refreshing preferences?
    I understand that you have CS5.5 and it did work before? Also do system maintenance with check and repair disk permissions, (use Apple Disk Utility for this).

  • Has anybody got Labview GPIB driver for a Time Electronics 5021 Calibrator

    Windows NT and 2000 platforms.
    Time electronics ltd multifunction claibrator model no 5021 or model no 9821

    Hi,
    National Instruments' Instrument driver library is at:
    www.ni.com/idnet.
    I did a search and couldn't find an instrument driver for this instrument.
    You can contact the instrument manufacturer to see if they have a LabVIEW instrument driver.
    Other options are contacting an alliance member to develop the instrument driver or you can do the development yourself. Here's a tutorial on writing instrument drivers in LabVIEW:
    http://zone.ni.com/devzone/conceptd.nsf/2d17d611efb58b22862567a9006ffe76/117f9eaedfd2c9e58625680a005acd06?OpenDocument
    Hope this helps.
    DiegoF.

  • JDev11g: ADFBC EO "collection" validator - anybody have this working?

    Hi gang
    I'm having a play with the new ADFBC entity object "collection" entity-level validator in JDev 11g as described in the Fusion Dev 11g guide section 7.4.14. Has anybody got this working? I can't seem to get any accessors or attributes to appear in the relevant poplists for this validator, even though I've created an accessor between my 2 EOs. I'm thinking I've done something wrong here.
    Regards,
    CM.

    In order for it to appear in the list of Accessors the Association between the EOs must be defined as a Composition Association.
    Penny

  • Tools for automated testing

    Hi,
    our QA dept is looking for a tool for creating automated tests that simulate user activity on web sites (APEX-based particularly).
    This tool probably should be able to create initial test scripts on behalf of QA engineer and then play them on its own to test our business processes.
    Could anybody recommend a good tool for this purpose?
    Thanks

    Hi Edward,
    Although it's maybe not entirely APEX, I saw Steven Feuerstein showing "Quest Code Tester for Oracle" (http://www.quest.com/code%2Dtester%2Dfor%2Doracle/ or http://unittest.inside.quest.com/product_info.jspa).
    As Steven describes: Code Tester automates the process of building and running tests of your PL/SQL programs. The major breakthrough achieved by this tool is that you describe the expected behaviour of your program through a graphical interface, and then Code Tester generates the test code needed to implement those tests.
    I found it quiet nice and as we're using a lot of PLSQL packages too, I think it can be useful in an APEX environment.
    Dimitri
    http://dgielis.blogspot.com

  • RAD tools for JSP apps with GUI editor?

    Hi,
    Could anybody recommend a RAD tool for JSP-based development with an integrated GUI page editor and HTML, JSP and JavaBeans/J2EE Java code generation?
    Should be usable by (trained) business analysts, so tools heavily based on UML are not exactly what I'm looking for.
    I need to develop a small "white label"-style generic web application for a few business processes, then let business users/analysts modify and deploy it.
    Thanks,
    Gabriel Tanase

    try Forte for Java or WebSphere Application Studio

  • Anyone got facelets working ?

    Hi,
    I have been trying to get Facelets working with the JSF portlet support in portal 9.2, but without success. I get a "java.lang.InternalError: erroneous handlers" error, which doesn't tell me much, besides that it is actually doing something with Facelets. Anybody got this working and if so what did it take ?
    /Steen

    Hi,
    I have been trying to get Facelets working with the JSF portlet support in portal 9.2, but without success. I get a "java.lang.InternalError: erroneous handlers" error, which doesn't tell me much, besides that it is actually doing something with Facelets. Anybody got this working and if so what did it take ?
    /Steen

  • Anybody got a better work flow for backing up multiple shoot day projects?

    Many of my projects are shot over multiple days. I import media at the end of each day and back up the event to another drive before deleting media from cameras/cards. So on day 2 I have one of three work flows for updating my back-ups.
    1. If I'm feeling lucky. I delete the previous back-up project from the back-up drive. And then make a new copy of the original event and add the date to the title after the word copy.
    2. I make a new copy of the event to the backup drive and date it. When it's done copying and been verified I delete the back-up event from the same back-up drive.
    3. I've just started copying new clips from the original media folder in the original event to the back-up project. It's more work keeping track of all the newly added media files and there is more chance of making an ommision.
    Anybody got a better work flow for backing up multiple shoot day projects?

    What you need:
    You will need two identical external drives and a copy of Carbon Copy Cloner. CCC is free. The drives could be USB 2 if all you are doing is backing up. If you plan on editing with the drive(s), you'll want firewire. Each needs to be large enough to contain the raw card contents for the duration of your gig.
    The Process:
    At the end of the first day's recording, connect the two drives to your computer (if firewire, daisy chain them / if USB, you'll need two USB 2.0 ports)
    On the first hard drive (Drive 1) create a folder - call it BigDealLecture
    Inside of BigDealLecture, create a folder and use the nameing convention  "BDL_Date_card number for that day" - so if you used 2 cards today, you should create BDL_2012-02-15_01 and BDL_2012-02-15_02
    Attach your card reader or camera to the system.
    Lock the cards so they can not be erased
    Insert Card 1 into the reader
    Select ALL contents of the card and copy them to the folder you created for the first card for today
    When it is complete, eject the card, insert card 2, copy its contents to the folder for card 2
    eject the card
    Launch CCC and do a clone of Drive 1 to Drive 2. You can set it to do a complete block by block clone or an incremental backup. Either will work.
    When finished cloning, test a random sample of the clips on both drives to make sure they work.
    When satisfied the copies work, put Drive 2 in the hotel safe.
    Put the Drive 1 in a place where you can grab it if there is an emergency in the night and erase the cards to get ready for the next day.
    Take Drive 1 with you to the lecture site the next day.
    Rinse and repeat daily.
    When the conference is over, send one of the drives via FedEx or some other same day service to your office. Pack the second drive in your bags for the trip home.
    A note: If you have enough downtime durning the conference between obligations, you can do the transfer from the cards to Drive 1 on site and do the clone when you get back to your room. Don't unlock and erase the cards until you are satisfied the copy/clone process was without incident.
    Have fun.
    x

  • Got new ATV and all set up. It keeps loosing connection with iTunes on laptop and have tried everything suggested in set up guide. It works fine for a while then the iTunes account vanishes from 'computer' menu TV screen.  Full Wifi signal on both devices

    Got new ATV and all set up. It keeps loosing connection with iTunes on laptop and have tried everything suggested in set up guide. It works fine for a while then the iTunes account vanishes from 'computer' menu TV screen.  Full Wifi signal on both devices so can't think what could be causing it to happen. Any suggestions please?

    Sorry, I updated another thread I was a part of but didn't update my own thread.....ughhh!
    I updated all of my ATV 2's and 3's to the latest firmware when it was released and have been problem free since. I do believe the major issue of not being able to connect after a period of inactivity has been corrected with the latest ATV firmware.
    I can look at my network connection table using "netstat -an" in a CMD window and I do not see the massive number of connections I saw before the update.
    Here is a link to the other thread I was referring to above:
    https://discussions.apple.com/message/19952545#19952545
    Have you applied the latest firmware updates to your ATV 3's?

  • So my iPhone 4S started draining battery after recent update, battery got changed and it worked perfect for 3 days, all of a sudden the phone won't stay on unless connected to mains... Cannot receive any signal "searching" constantly. HELP

    So my iPhone 4S started draining battery after recent update, battery got changed and it worked perfect for 3 days, all of a sudden the phone  shut down and now won't stay on unless connected to mains... Claims its at 100% battery but thats impossible as it was at 30% before it shut down randomly.
    Cannot receive any signal "searching" constantly.
    Turns off as soon as removed from usb ... wont stay on connected to laptop!
    HELP!

    The iPhone includes a one year warranty. If an Apple store is not nearby, you can call AppleCare and handle an exchange under warranty over the phone. The exchange will be shipped to your door - someone must sign for the delivery so if no one will be at home, have it delivered where you work. You use the same box to return the existing iPhone back to Apple. Return shipping label and tape to reveal the box incuded - call the carrier with number incuded when the box is ready to be picked up. AppleCare will request a credit card in the event the existing iPhone is not returned within 10 days after the exchange under warranty is received.
    Hardware can fail - it happens, which is why there is a one year warranty.

Maybe you are looking for