Anybody in the bay area has 4g lte with vz or att?

i am planning on getting a new ipad with 4g but comfused which is faster in the bay area? i was curious on what's your guys thoughts?

You are not the only one Neo. I consistantly get slow 4g LTE speeds in the DFW metroplex. Over the last month I've run several speed tests and come back with less than 2Mbps download. During the 12 o'clock lunch hour I have to switch to 3G just to get any data at all. I thought it might be my phone (Samsung Galaxy Nexus) so I did a factory reset a while back which didn't help anything. Then I spoke with support on the phone who suggested I get a new SIM card at the local store. I did that, and it helped some. My speeds went up by changing the SIM card from less than 1Mbps to the less than 2Mbps I'm now recording. What I found interesting was that the rep at the store said that it would probably only get faster during non-peak hours. The reason speeds are so low on 4G LTE is because there are too many people using it for the infrastructure that is currently in place. That statement along with my continued dissatisfaction with the speeds I'm getting are making the competition look good. For any good it will do, I am mostly in zip codes 75248 and 75001.

Similar Messages

Looking for SAP(FICO) trainer in the Bay Area

A company in the bay area is looking for SAP(FICO) trainer who has command on configuration of the modules and min work ex of about 5 years.
Please post your resumes to [email protected] or call at 408-512-8033 for more information.
Regards
Uma

A company in the bay area is looking for SAP(FICO) trainer who has command on configuration of the modules and min work ex of about 5 years.
Please post your resumes to [email protected] or call at 408-512-8033 for more information.
Regards
Uma

My macbook pro 15inch running on maverick when i try to click on wi-fi says no hardware installed please help i need wifi and and under network staus wi-fi is fail and under network airport is not connected can anybody help the wifi icon has a x and does

my macbook pro 15inch running on maverick when i try to click on wi-fi says no hardware installed please help i need wifi and and under network staus wi-fi is fail and under network airport is not connected can anybody help the wifi icon has a x and does not even let me turn it on

Have you attempted to reset the SMC? That would be the first step. Hold the left control, option, shift key and the power button for about 5 seconds and release. Then try to reboot. Might as well reset the PRAM as well. Hold command, option, P, R on start up until the machine restarts. If that doesnt' have any affect we'll have to dig deeper into a potential hardware failure.
If this method doesn't work, check the webcam that will tell the problem is on the iSight & WiFi cable. If your webcam is ok, then it'll be the WiFi card problem. Hope it can help ;-)
- xia_us9

Iphoto6: several issues: 1st my library is so messed up, everytime I delete a photo, in the next moment I look at a file the deleted photo has quadrupled, as with files, dates wrong

iphoto6: several issues: 1st my library is so messed up, everytime I delete a photo, in the next moment I look at a file & the deleted photo has quadrupled, as with files, dates are all wrong, missing a few years.............

Sounds like your database is damaged.
Try these in order - from best option on down...
1. Do you have an up-to-date back up? If so, try copy the library6.iphoto file from the back up to the iPhoto Library allowing it to overwrite the damaged file.
2. Download iPhoto Library Manager and use its rebuild function. This will create a new library based on data in the albumdata.xml file. Not everything will be brought over - no slideshows, books or calendars, for instance - but it should get all your albums and keywords back.
Because this process creates an entirely new library and leaves your old one untouched, it is non-destructive, and if you're not happy with the results you can simply return to your old one.
3. If neither of these work then you'll need to create and populate a new library.
To create and populate a new *iPhoto 6* library:
Note this will give you a working library with the same Rolls and pictures as before, however, you will lose your albums, keywords, modified versions, books, calendars etc.
Move the iPhoto Library to the desktop
Launch iPhoto. It will ask if you wish to create a new Library. Say Yes.
Go into the iPhoto Library on your desktop and find the Originals folder. From the Originals folder drag the individual Roll Folders to the iPhoto Window and it will recreate them in the new library.
When you're sure all is well you can delete the iPhoto Library on your desktop.
In the future, in addition to your usual back up routine, you might like to make a copy of the library6.iPhoto file whenever you have made changes to the library as protection against database corruption.
Regards
TD

I have a problem with color prints from photoshop elements 12. The pictures are too light and with strange colors. I have a Canon pixma mg615I0 printer and use mac os X yosemite. The pictures are taken with a coanon eos 550d in the color space sRGB. I hav

Hi
I have a problem with color prints from photoshop elements 12. The pictures are too light and with strange colors. I have a Canon pixma mg615I0 printer and use mac os X yosemite. The pictures are taken with a coanon eos 550d in the color space sRGB. I have followed adobes recommendations and have tried both letting the printer respektive photoshop manage the colors. But nothing works. I see that there are different opinions about which is best to do so I tried both. I have the latest printer driver installed. Can anyone help me with this?

Do the following:
Print a test page from the printer. Perhaps the print head needs cleaning via its maintenance facility.
Let the printer manage colors, not PSE
Calibrate the monitor

How do I create a separate Address Book? I'm not asking about a mailing list but an address book where the addresses are not mixed in with my regular address b

How do I create a separate Address Book? I'm not asking about a mailing list but an address book where the addresses are not mixed in with my regular address book. I already have three address books created for me by Thunderbird. I add all new addresses to one of those but am afraid to delete the other address books because some of their addresses are not repeated in my "main" address book. So if I don't delete all the names in one of the existing books, I need to create an empty book that will not mix the addresses with those in another address book. HOW DO I CREATE A NEW, EMPTY ADDRESS BOOK? I want to be able to create various mailing LISTS using the addresses in this new book so I will eventually have a special address book with a variety of mailing lists I can use as I wish.

In 24.4.0 there is no File|New|Address Book. There is File|New|Address Book Contact. How do I create a new address book ?

HT204379 I have pointed to my pictures folder and all the pictures are 1mb in size with a lowest resolution 4416 × 3312. Why do I still get blury images in my shifting titles screen saver?

Hello,
I have just moved to mac and pointed my screen saver to my pictures folder and all the pictures are 1mb in size with a lowest resolution 4416 × 3312. Why do I still get blury images in my shifting titles screen saver?
Regards,
Jan

finally found it
http://lifehacker.com/5711409/how-to-search-for-hidden-packaged-and-system-files -in-os-x
need app find any file
link at bottam

I cannot print ANYTHING frmo the internet/email at all; only from Word. Comcast & Kodak say it's a FireFox problem. All the letters are little square ones with 1 to 2 spaces in between each word.

I cannot print ANYTHING from email or internet at all; only from Word. Comcast and Kodak says it's a FireFox problem. I have work to print and cannot. All the letters are little square ones with 1 to 2 spaces in between each word.

Caused by a Bug in Firefox 4.0b12. It was fixed on Monday in the 4.0b13 pre "tester" nightly's. The fix will be in the 4.0 Release Candidate.

How do I display a message in the message area of a report with SALV?

Hi,
How do I display a message at the bottom of the screen of a report (don't know the correct name for the area, but it's the area where error messages normally appear) using the CL_SALV_TABLE object model?
Is there a method in the object model somewhere that will place some text of my choosing in that area for me?
I hope I stated that in an understandable way.
If not, let me know and I'll try again.
Thanks for your help!
Andy

Hi Andrew,
you can issue an error message to be displayed as an error message:
MESSAGE ID .. TYPE 'S' NUMBER .. DISPLAY LIKE 'E'
TYPE 'S' messages are displayed in the status area of the next screen processed, program flow is continued after the message statement. The DISPLAY LIKE 'E' causes the message to be displayed in red color as an error message.
Regards,
Clemens

When saving a PDF to the Hard Drive the PDF logo has been replaced with a HTML FireFox Logo where as before it would have a PDF Logo. Is this right?

It also when opening opened in FireFox not Adobe until i changed it in Windows but the PDF logo has gone and now with the HTML FireFox Logo which now opens in Adobe. Why has the PDF logo been replaced? I hope i make some sense. Thankyou.

If you set Firefox as the default browser and Firefox detects via a registry scan that there is currently no file handler application that handles PDF files and a few other file types then the Firefox updater/installer registers Firefox as the default application to handle these file types.
This causes them to show with a Firefox icon on the desktop and in other places like Windows Explorer (Bug 452254).
You can right-click a PDF file in Windows Explorer and use the open with dialog to change the default application to the Adobe Reader or your preferred application to handle PDF file.
If the icon doesn't change to the icon of that application then you may have to change the icon on the desktop via other means
On Windows XP you can check the Windows Control Panel:
*Control Panel > Folder Options > File Types: .PDFf
*Registry Editor: HKEY_CURRENT_USER\Software\Classes\.pdf\ or HKEY_CLASSES_ROOT\.pdf (Default = empty string)
*[[/questions/1014919]]

The type tool has a circle with a strike through on the bottom corner and won't insert words when iI type

I've just restored from a computer crash and re installed Creative Cloud 6 on my clean computer. Since then I've tried to use illustrator but can't get the type tool to function. It appears but has a small circle with a strike through on the bottom right corner and won't insert words when I type. I'm a newbie to illustrator and other Adobe products so please be gentle. Thanks for any help.

Thanks for your suggestion.
This was a bigger problem than I thought so I contacted support. The type issue was fixed in the repair.
BTW I am running Creative Cloud 2014 and not cc6 like I thought. Also on PC Windows 7
Here is the result:
I also have had a difficult time with Adobe Illustrator CC 2014 crashing upon launch. The support staff was great even though we had to work through several sessions. Below is the email explaining our final session.
This email is in regards with the issue you had been facing with Illustrator CC 2014.
While going through the installer logs, we found that there was an issue with the installation & the program installer had been denied access to several critical files & folders during installation.
This was the main reason for Illustrator crash as several critical components had not been installed properly.
We tried installing the program in a new user account & that worked.
Though the program has been installed properly now & is working in your old account, I will still strongly recommend you to get your computer user account repaired with a Windows 7 operating system diskette.
This is required so that you do not run into more trouble later while working with the Adobe Applications or even while installing other programs.
Avanish Divya was the final support person that successfully resolved my problems.
I hope this helps other panicked users.

WHY CAN I NOT SYNC THE NOTES AREA IN OUTLOOK CONTACTS WITH THE IPHONE

when i make changes to the notes area in my outlook contact and than sync, it returnes back to the original notes and will not accept my changes

Jayden0201 wrote:
I upgraded my computer, so I had to reinstall iTunes... I don't understand why I cannot just simply sync the music off of my iPod Touch that I didn't buy with iTunes to my library... The only music that is syncing is the music that I bought through iTunes... WHY CAN"T IT JUST BE SIMPLE?!
To help prevent piracy.
You don't have the old computer or a backup of it?
See this -> https://discussions.apple.com/docs/DOC-3991

Does anybody have the O2 Arena Wallpaper that comes with some O2 phones?

Does anybody have the O2 arena wallpaper lit up at night. It usually comes with some O2 phones such as the galaxy S4.

MarinaP wrote:
jonsie wrote:
I use the tower bridge wallpaper now for a little reminder of home....got sick of looking at Mauys face Already tired? You're gonna have to see that face for a while!
I do have a month or so break so no doubt I'll miss her....a little

DPS Sigel edition. The download area has no app to download, only a Get Started link

What to du? Uninstall the whole CC package and start all over? Or what?

Erin I am sorry you are facing difficulty downloading the Creative Cloud software. It can be frustrating when you do not have access to high speed stable Internet.
You can attempt to download the base installers and updates by following the directions listed at:
Adobe CC 2014 Direct Download Links: Creative Cloud 2014 Release | ProDesignTools
All Adobe CC 2014 Updates: The Direct Download Links for Windows | ProDesignTools
You may want to attempt to utilize some form of download management as the main issue seems to be the stability of your connection.
There is not currently a method to resume downloads within the Creative Cloud Desktop application. There is download management included though it may not be enough to compensate for the current Internet connection. If you are curious you can find additional details on how to resolve download errors at Error downloading Creative Cloud applications - http://helpx.adobe.com/creative-cloud/kb/error-downloading-cc-apps.html.

Anyone in the Bay Area with experiencing in dissassemble MBP?

I'm considering opening up and check the thermal grease if it's properly applied. But I wish I have someone experienced in diassemble one to help me out.
Thanks

I'm considering opening up and check the thermal
grease if it's properly applied. But I wish I have
someone experienced in diassemble one to help me out.
Thanks
Dliao
Try this link. It explains how to dissasemble a MacBook Pro.
http://www.ifixit.com/Guide/85.1.0.html
Good Luck Eh!

Anybody in the bay area has 4g lte with vz or att?

Similar Messages

Maybe you are looking for