Anybody still having problems updating to ios 5?

I have had no success in updating my Verizon 32GB i Phone 4 with ios5. Every time I go thru the update software process I get an error message 3104. I follow the thread and it has me re-load i Tunes. I have done this and still get the error 3194 and will not let me install ios 5. I have a Dell 64 Bit processor running Windows 7 (64). Very dissipointed, this is the first glitch I have had after converting to Apple. Also having the same problem with iPAD2 update for ios5. So this may point to a problem with i Tunes.
I have gone to Google and looked up the problem and there appear to be several fixes such as add a line of language to the i Tumes software or remove a line. This is a little too much for a mear mortal like me to be fooling around with re-writing software language.
Frustration level - High. Dissipointment level - Higher.
Thanks for the venue...

Similar Messages

Having problems updating to iOS 5 for iPod Touch.

I own an iPod touch 32GB, 3rd generation. I have version 4.3.5 at the moment. When I plug my iPod into my computer and try to update it to 5.0.1 (iOS 5) a message comes up that says "Updating to iOS 5.0.1 will delete all of the media, including iTunes store purchases, on your iPod Touch. To preserve your content, apply this update on the computer where you sync music, videos and photos." I have never used another computer for my iPod. When iOS 5 first came out I was able to update my iPone 4 perfectly with out any problems. Is anyone else having/had this problem or getting/got this message?

If you had been using this computer for syncing, the music should still be present in iTunes:
Connect your iPod to the computer either via cable or wireless and check the iTunes settings. Finally, do a sync.

Anybody still having problems with their Xtra and Windows Media Play

"PlaysForSure"?
Yeah...right!
Even though I've got WMP0 and the new firmware FINALLY up and running, I'm still having major problems.
Syncing files between the player and the PC is causng me no end of hassle. I can sometimes get a few tracks onto the player, sometimes none before it freezes and I have to unplug the USB connection to get it running again.
Notmad is having major connectivity problems then when it does finally work it jams whilst transferring files onto my player too.
I've just abandoned all hope of running any Creative software full stop given my woes around this firmware.
Is anybody else experiencing these issues or is it just me?

Are you showing an signal when the SIM is inserted into the iPhone? Making calls and sending/receiving messages are two different things. Calls use the cellular side of things, messages uses data. I'm surprised that is all T-Mobile would do to check out your account is to test your SIM. What if they look at your account, is it provisioned correctly?
You can try to reset the phone. Hold the sleep/wake and home buttons together until you see the Apple logo. The phone will reboot. See if it works. If not, try to reset network settings. Go to Settings>General>Reset>Reset Network Settings. The phone will reboot. Check they if it is working. If not, then you can make an appointment with the Genius Bar at the Apple store, but I still lean heavily that the problem is with the carrier.

Having problems updating from IOS 4 to IOS 5

I have a 3rd generation 8 gb Ipod Touch, my serial number is 8K030K575J. Im trying to update from IOS 4 to IOS 5, my current software version is 4.2.1 I click the button that says check for updates and it tells me that 4.2.1 is the most up to date version. What am i doing wrong can someone please assist me in updating to IOS 5

There are no 8gb thrid gen ipod touches. It is a second gen ipod touch and can only go to 4.2.1
Sorry.

Having problems updating to IOS 5.01

Hi,
I having tried to update my iphone 4s and everything when it is like 75% done it crashs . Itunes is saying "Itunes is restoring the software on this iphone" and stay there forever. I tried to restart the process and it happened again.
Someone can help me?
Thank you guys

Common Sense points:
1. Try updating your phone 1-2 days after the release date. When IOS 5.0 was released the Apple servers were overwhelmed because of so many users trying to update at the same time. As a result, many users could not complete the 5.0 update.
2. An iPhone with 32gb of data can take well over an hour to complete. My iPhone with 25gb of data tool an hour and a half to complete. I waiting to perform the update three days after it's release so I would not get stuck with Apple servers timing out.
3. My iPad took less than an hour with the same amount of data.
So rule number one.... Wait a day or two after the release date to perform your update. I've seen a good many people get timed out in the middle of an update because they needed to grab it several hours after the release.

I had already update mi new factory unlocked iPhone 4S to iOS 5.1.1 and I still having problems with "invalid sim". I'm from Argentina and here we don't have official service. PLEASE HELP ME, WHAT CAN I DO??? In Argentina is too expensive an iPhone 4S.

I had already update mi new factory unlocked iPhone 4S to iOS 5.1.1 and I still having problems with "invalid sim". I'm from Argentina and here we don't have official service. PLEASE HELP ME, WHAT CAN I DO??? In Argentina is too expensive an iPhone 4S. Please I need help to continue believing in Apple. Thanks a lot. If anybody speak spanish better.

Was it purchased from an official Apple Store, not a reseller? Only Apple Stores sell official factory unlocked phones. The others sell hacked to unlock phones, and the unlocking is unstable.
Try these steps, as needed:
1. Reset phone - press both home and on/off buttons for at least 10 seconds until the Apple logo appears.
2. Settings > General > Reset > Reset Network Settings.
3. Replace SIM card (and reset network settings again)
4. Restore Phone in iTunes using a backup
5. Restore in iTunes as new, without using a backup

I am still having problems with my music videos freezing (all purchased from iTunes) since the update. Have restarted, rebooted etc. and it is worse than before. Help! Spent a lot of money on these and they won't play properly.

I am still having problems with my music videos freezing (all purchased on iTunes) since the update. The first day of the update, no problems...played 6 hours of music videos and no freezing. Today...every single video froze!!! So frustrating! I rebooted, restarted, powered down and no help. I would appreciate any suggestions. Thanks.

I don't know how to do this without using a mouse point.
This may help, http://www.computerhope.com/issues/ch000542.htm
As for question #2, you call tell how iTunes is sorting songs by the up or down arrow next to a header name.
Even the original order that the songs were entered or date added or last played can be sorted.
Much easier with a mouse or touch pad.

HT4906 Both my iPhoto, Aperture and OX is update still having problem asking me to update my iPhoto.

Both my iPhoto, Aperture and OX is update still having problem asking me to update my iPhoto.

Make a temporary, backup copy (select the library and type Command+D) if you don't already have a currnet backup of the library and apply the two fixes below in order as needed:
Fix #1
Launch iPhoto with the Command+Option keys held down and rebuild the library.
Since only one option can be run at a time start with Option #1, followed by #3 and then #4 as needed.
Fix #2
Using iPhoto Library Manager to Rebuild Your iPhoto Library
Download iPhoto Library Manager and launch.
Click on the Add Library button, navigate to your Home/Pictures folder and select your iPhoto Library folder.
Now that the library is listed in the left hand pane of iPLM, click on your library and go to the File ➙ Rebuild Library menu option
In the next window name the new library and select the location you want it to be placed.
Click on the Create button.
Note: This creates a new library based on the LIbraryData.xml file in the library and will recover Events, Albums, keywords, titles and comments but not books, calendars or slideshows. The original library will be left untouched for further attempts at fixing the problem or in case the rebuilt library is not satisfactory.
OT

HT6058 I have updated my I pad dut I'm still having problems my iPad seems to freeze and when I go to put in my pin it take a few seconds before the numbers go in and my games stop and start and stop and start for a bit before they run properly

I have updated my I pad dut I'm still having problems my iPad seems to freeze and when I go to put in my pin it take a few seconds before the numbers go in and my games stop and start and stop and start for a bit before they run properly

Try this - Reset the iPad by holding down on the Sleep and Home buttons at the same time for about 10-15 seconds until the Apple Logo appears - ignore the red slider - let go of the buttons. (This is equivalent to rebooting your computer.) No data/files will be erased.
 Cheers, Tom

I'm still having problems downloading. Can anybody help? Everytime I try yo download, it's saying my Adobe Flash CS4 won't download.

I'm still having problems downloading. Can anybody help? Everytime I try yo download, it's saying my Adobe Flash CS4 won't download.

UP%20%26 COMIN' what specific error message do you receive when you try to download the Creative Suite 4 installation files? Which Creative Suite 4 title are you downloading? Are you downloading the installation files from https://helpx.adobe.com/creative-suite/kb/cs4-product-downloads.html?

If you're having problems updating firmware and have Windows Media Player 11 B

I've seen a number of problems with people updating their firmware with WMP installed and it turns out that's the problem. WMP has a bug in it that will not allow the firmware update to recognize the player. So, here's what to do to roll back to a previous version:
These instructions will only work for Windows XP
You must be logged on as an administrator or a member of the Administrators group to perform the following procedure.
. Disconnect any portable music or video devices that might be attached to your computer.
2. Click Start, and then click Control Panel.
3. In the Category View of Control Panel, click Add or Remove Programs, and then click Remove a program.
4. Click Windows Media Player , and then click Remove.
If Windows Media Player is not displayed in the list of currently installed programs, then try the following:
. At the top of the list, select the Show updates check box.
2. In the Windows XP - Software Updates section, click Windows Media Player , and then click Change/Remove.
5. In each of the two confirmation dialog boxes that appear, click OK.
6. When the rollback process is complete (it might take several minutes), click Restart.
7. Click Start, and then click Control Panel.
8. In the Category View of Control Panel, click Add or Remove Programs, and then click Remove a program.
9. Click Windows Media Format Runtime, and then click Remove.
If Windows Media Format Runtime is not displayed in the list of currently installed programs, then try the following:
. At the top of the list, select the Show updates check box.
2. In the Windows XP - Software Updates section, click Windows Media Format Runtime, and then click Change/Remove.
If you installed a non-US English version of Windows Media Player , the instructions in the dialog boxes that are mentioned in steps 9, 0, and might appear in English.
0. In the first confirmation dialog box that appears, click OK.
. In the second confirmation dialog box that appears, select the Do you want to continue with the rollback? check box, and then click OK.
2. When the rollback process is complete (it might take several minutes to complete), click Restart.
3. Click Start, and then click Control Panel.
4. In the Category View of Control Panel, click Add or Remove Programs, and then click Remove a program.
5. Click Microsoft User-Mode Driver Framework Feature Pack .0.0, and then click Remove.
6. Follow the instructions that appear in the Software Update Removal Wizard.
If the Wudf0000 confirmation dialog box appears, click Yes to continue. When the software removal process is complete (it might take several minutes to complete), click Finish.
If you are still having problems and all else fails, do a System Restore to before WMP was installed.
*Note: If you remove Windows Media Player and the Windows Media Format Runtime, and then encounter error C00D27D ("A problem has occurred in the Digital Rights Management component. Contact Microsoft product support, you might be able to resolve the problem by installing the Windows Media Format 9.5 Runtime. For information about installing the Runtime, in the Microsoft Knowledge Base, see article 8922, "Update for Windows Media Digital Rights Management-enabled players."
**You might not be able to roll back to a previous version of the Player if the hidden folder $NtUninstallwmp$ is deleted from your computer. Some non-Microsoft programs (such as CCleaner) delete this folder in an attempt to remove unwanted files from your computer.
More information here:
http://www.microsoft.com/windows/win...ionofthePlayer
Some people have found these instructions to be a solution to the "Player Not Connected" Error when trying to update the firmware. (Your mileage may vary)
Note to Mods: This would make a nice sticky

OK. I've been having this problem and have probably read every post there is on the net concerning it. But it doesn't seem to be only a Media Player problem. I was only running Media Player 0 when it happened to me. I found the solution somewhere, I can't remember where, but it worked for me and it was easy.
Here's what you do:
. Download BOTH ZenXtra_PCFW_LA__20_08.exe and enXtraP4SAudible_PCFW_LB_2_0_03.exe
2. Connect the Zen Xtra to your PC.
3. Run ZenXtra_PCFW_LA__20_08.exe. When the window comes up and says that your device is not connected DON'T do ANYTHING! Just leave it there.
4. Now run ZenXtraP4SAudible_PCFW_LB_2_0_03.exe
5. It told me that I already had this version on my device did I still want to load it's I said yes and it went through the whole upgrade and now it works fine.

I'm still having problems!!!!

im still having problems after trying to update my settings, case # 352358323

ShirleyAnnM wrote:
Hello
Thank you for your reply
Yes, I can receive SMS via wi-fi when I'm at home
No, you can't, because SMS messages do not travel over the data network, whether it's cellular or WiFi.
Are the message bubbles blue or green? Green are SMS or MMS messages. Blue are iMessages. Both iMessages and MMS messages require a data connection. MMS requires a cellular data connection, iMessages can be cellular or WiFi. MMS messages travel on the voice network.

Is anybody else having problem trying to put a background pic it won't zoom out?!

Is anybody else having problem trying to put a background pic it won't zoom out?!

Hi Daguyuluv2nv!
I have some information for you that might help you with that issue:
Reduce screen motion - iPhone User Guide
http://help.apple.com/iphone/7/#/iph11d9baf58
You'll want to turn that setting off in your iOS device in order to view your background picture the way you desire. Thanks for using the Apple Support Communities!
Cheers,
Braden

Still having problems installing itunes8

Okay so im still having problems installing itunes 8. So i put the computer in safe mode and got it to run further, no my prolem is it says "the system adminstrator has set policies to prevent this installations", while in safe mode it doesn't tell me that exe is not a valid win32 applications, and also in safe mode it states the publisher is Apple Inc. if i try to download in regular mode the publisher says unknown.
Anybody have any ideas?

Try this.
- Right-click on the installation file: iTunesSetup.exe
- Select 'Run As'
- Select Option to Run as 'Following User' and select 'Administrator' + enter
admin password (hopefully you have it)

Still having problems with images

I am still having problems putting images into an Oracle 9i database and fetching them back out.
I think I have finally managed to force a blob image into the database, but can't seem to get it back out into a byte array.
After many iterations, I have come up with something that might be getting close.
The code is listed below.
Everything has been simplified as much as I can.
The function get_user_picture_func1 returns a single blob for a specified index.
In this case, I have hardcoded the index = 3 and I think there is an image in the database for that index. (it says there are bytes there anyway).
The byte array to store the image is defined outside the method fetchImage().
byte[] imageData;
When I call fetchImage() I get the following exception:
Invalid argument(s) in call: getBytes().
at the line
imageData = picture.getBytes(zro, k);
It looks like getBytes has two parameters, Long offset, int length.
I had diagnostic statements and I confirmed that the statement:
int k = (int)picture.length(); returned k=4198 (the same size as the image).
I am at a loss to understand what the exception is trying to tell me.
I'be been trying to get this to work for a week now and am really getting burned out trying to find anything that works.
void fetchImage()
Blob picture;
String query = "{ ? = call get_user_picture_func1( ? ) }";
try
CallableStatement cs = con.prepareCall( query );
cs.registerOutParameter(1, OracleTypes.BLOB);
cs.setInt(2,3);
cs.execute();
picture = cs.getBlob(1);
if( picture != null)
InputStream in = picture.getBinaryStream();
int k = (int)picture.length();
imageData = new byte[k];
long zro = 0;
imageData = picture.getBytes(zro, k);
catch( Exception e)
}

I have been using my iPad mini with keynote to make slide presentations in my classes.There has been no problem until I upgraded to Keynote 5.3. Now the refresh rate on the iPad mini is so slow and out of sync with the projected image that I was forced to not use keynote! I have 2 years of work invested that I will have to toss unless this gets fxed. I have not had this problem with this equipment/files before. Only change was upgrade to keynote 5.3. ( Some details: I connect to the projector with a VGA cable and Apple lightining adaptor to the iPad Mini. All updates current on theiPad Mini.) Yes I did turn on and off all equipment. And I did check all cable connections. Thanks for any help you may give!

Anybody still having problems updating to ios 5?

Similar Messages

Maybe you are looking for