Anyconnect and win7 binding order

I have an issue where an application will not synchronize correctly when routin through anyconnect vpn.  have investigated and discovered that this is because The anyconnect client will move itself to top of binding order when it is reconnected.  This is after moving it to bottom in windows.  is there a way to have the anyconnect client not move itself to the top of the binding order on connection, but honor the windows setting. 

This appears to be a Windows 7 "Feature" where the latest network interface to make a connection is moved to the top of the binding order, as Windows assumes it has better information than the previous connection.  Otherwise why would you have connected in the first place right? 
We are having a similar issue with a client who has an application which when run binds to the NIC highest in the binding order and then uses that MAC address for licensing.
Since the app is only run by 3 devices, we are issuing PCF files and Ipsec VPN for those users as the IPsec VPN falls into windows "VPN Client Adapters" pool of nics on the binding order, and doesn't change when it connects or disconnects.
I can see why Cisco wanted Anyconnect outside that pool, so it would have a higher level of control over the PC and prevent the user from bypassing security by using a higher bound nic card if you deployed the BYOD / Mobility Solution.
There is a setting on the ASA to allow you to run a script on connect, under the anyconnect customization / script in ASDM.  Looks like a windows script file might allow you to make a change to this binding order, only issue with that is that we would have to know the UID or whatever for the device in order to create the registry key change for each user, and if they connect form another device we might well break that device by making registry changes to it.
Any comment from Cisco Employee's or Anyconnect Dev / Support team would be appreciated.

Similar Messages

  • Correct binding order in a Cluster with logical switches, NIC teams, and vNICs on the host.

    I have seen many recommendations to set the network binding order on you Hyper-V hosts to something similar to:
    Management NIC
    Cluster NICs
    iSCSI NICS
    However, all of  these recommendations are for scenarios where the NICs are all physical NICs in the host.
    Using Server 2012 R2, I am building converged networks with logical switches, NIC Teams, and vNICs on the host.  So when I go set the network binding order, I now have all these components to deal with as well.  For example, on a 4 adapter blade,
    I might typically have the following items in the binding order drop-down.
    4 - physical NICs (2- teamed for the 1 virtual switch, the other 2 used for iSCSI)
    1 - Team interface (Datacenter_Switch)
    5 - vNICs (Management, Cluster, LiveMigration, iSCSI-1, iSCSI-2)
    So, should you only worry about order of the vNICS (placed at the top) and let the other components just fall to the bottom of the list?  This seems to be likely to me, since the binding order applies to service access to the resources, and the other
    components are not being directly accessed by network services?
    Or, should the order start out with the physical resources needed to access the vNICs, followed by any intermediate resources (switches or team interfaces, then the vNICS themselves, to ensure that the resources are available to the subcompnents accessing
    them?
    Any help would be appreciated.
    Thanks.
    -Tim Reid

    If by 'network binding order' you mean the order set in the Advanced Settings of the Network Connections of the Control Panel, then the most important one is to make sure the domain network is at the top of the list.  Whichever network is at the top
    of the list is used first for auth functions.  So auth functions perform best when the proper network is placed first in the binding order.  After that, I don't know that it makes much difference at all.  (If it does, I'm sure my statement will
    start a lively discussion. <grin>)
    . : | : . : | : . tim

  • My pc crashed and win7 64-pro has to be installed again.

    MY new pc crashed and win7 64-pro needs to be installed again.
    after this I need to install photoshop CC again, but i miss my emails with registration number etc.
    how can i get the needed information, to install and setup Photoshop CC again ?
    thanks,
    -Frans.nl

    Hi frans.nl,
    You just need to download the Creative cloud application in order to install your Photoshop CC.
    Download of the Application can be done through your account on adobe.com.
    If in case you still face issues, please contact support:
    https://helpx.adobe.com/contact
    Regards,
    Sheena.  

  • Group policy for changing binding order of network adapters

    Hi,
    We have enabled Wifi and Wired (LAN) connections at the same time for users using group policy. Both connections works properly on laptops. Now some applications are not working due to routing issues as same connections are working at the same time.
    We want to change connections priority in such a way that Wired (LAN) should always take priority over WiFi connections.
    http://support.microsoft.com/kb/894564 describes method for changing same on single computer.
    Can this be achieved using group policy.
    Mukesh S MCITP Exchange 2007

    Hi,
    There is no corresponding group policy settings which can change binding order of NIC. However, in the article you provided, it says that we can create a fixed metric by changing
    the InterfaceMetric registry value or set the interface metric by using a script. In this way, we can choose to use Group Policy Preferences Registry extension to deploy the registry change to clients, or we can use group policy to deploy the script to clients.
    Regarding GPP registry extension, the following article can be referred to for more information.
    Registry Extension
    http://technet.microsoft.com/en-us/library/cc771589.aspx
    If we choose to deploy script via group policy, we can assign computer startup script or user logon script.
    Regarding this point, the following article can be referred to for more information.
    Assign computer startup scripts
    http://technet.microsoft.com/en-us/library/cc779329(v=WS.10).aspx
    Assign user logon scripts
    http://technet.microsoft.com/en-us/library/cc781361(v=WS.10).aspx
    Best regards,
    Frank Shen

  • What is the diffrence between a blanket PO and a Framework order?

    What is the diffrence between a blanket PO and a Framework order?

    Hi
    You have to use document type Frame work order for Blanket PO.
    You can use blanket purchase orders to procure consumable materials or services for which it is not worth creating a separate purchase order for each procurement transaction. 
    Blanket purchase orders are usually valid for a longer period of time. You can directly post the invoices for the materials and services procured for this blanket purchase order.
    Raju

  • Dynamic SQL and Bulk Bind... Interesting Problem !!!

    Hi Forum !!
    I've got a very interesting problem involving Dynamic SQL and Bulk Bind. I really Hope you guys have some suggestions for me...
    Table A contains a column named TX_FORMULA. There are many strings holding expressions like '.3 * 2 + 1.5' or '(3.4 + 2) / .3', all well formed numeric formulas. I want to calculate each formula, finding the number obtained as a result of each calculation.
    I wrote something like this:
    DECLARE
    TYPE T_FormulasNum IS TABLE OF A.TX_FORMULA%TYPE
    INDEX BY BINARY_INTEGER;
    TYPE T_MontoIndicador IS TABLE OF A.MT_NUMBER%TYPE
    INDEX BY BINARY_INTEGER;
    V_FormulasNum T_FormulasNum;
    V_MontoIndicador T_MontoIndicador;
    BEGIN
    SELECT DISTINCT CD_INDICADOR,
    TX_FORMULA_NUMERICA
    BULK COLLECT INTO V_CodIndicador, V_FormulasNum
    FROM A;
    FORALL i IN V_FormulasNum.FIRST..V_FormulasNum.LAST
    EXECUTE IMMEDIATE
    'BEGIN
    :1 := TO_NUMBER(:2);
    END;'
    USING V_FormulasNum(i) RETURNING INTO V_MontoIndicador;
    END;
    But I'm getting the following messages:
    ORA-06550: line 22, column 43:
    PLS-00597: expression 'V_MONTOINDICADOR' in the INTO list is of wrong type
    ORA-06550: line 18, column 5:
    PL/SQL: Statement ignored
    ORA-06550: line 18, column 5:
    PLS-00435: DML statement without BULK In-BIND cannot be used inside FORALL
    Any Idea to solve this problem ?
    Thanks in Advance !!

    Hallo,
    many many errors...
    1. You can use FORALL only in DML operators, in your case you must use simple FOR LOOP.
    2. You can use bind variables only in DML- Statements. In other statements you have to use literals (hard parsing).
    3. RETURNING INTO - Clause in appropriate , use instead of OUT variable.
    4. Remark: FOR I IN FIRST..LAST is not fully correct: if you haven't results, you get EXCEPTION NO_DATA_FOUND. Use Instead of 1..tab.count
    This code works.
    DECLARE
    TYPE T_FormulasNum IS TABLE OF VARCHAR2(255)
    INDEX BY BINARY_INTEGER;
    TYPE T_MontoIndicador IS TABLE OF NUMBER
    INDEX BY BINARY_INTEGER;
    V_FormulasNum T_FormulasNum;
    V_MontoIndicador T_MontoIndicador;
    BEGIN
    SELECT DISTINCT CD_INDICATOR,
    TX_FORMULA_NUMERICA
    BULK COLLECT INTO V_MontoIndicador, V_FormulasNum
    FROM A;
    FOR i IN 1..V_FormulasNum.count
    LOOP
    EXECUTE IMMEDIATE
    'BEGIN
    :v_motto := TO_NUMBER('||v_formulasnum(i)||');
    END;'
    USING OUT V_MontoIndicador(i);
    dbms_output.put_line(v_montoindicador(i));
    END LOOP;
    END;You have to read more about bulk- binding and dynamic sql.
    HTH
    Regards
    Dmytro
    Test table
    a
    (cd_indicator number,
    tx_formula_numerica VARCHAR2(255))
    CD_INDICATOR TX_FORMULA_NUMERICA
    2 (5+5)*2
    1 2*3*4
    Message was edited by:
    Dmytro Dekhtyaryuk

  • Apex listener installed no test and set bind variables buttons

    I have installed Apex listener and while creating restful service module i dont see test and set bind variables buttons in the source region.
    I went through the many posts. Installed apex listener successfully.
    getting http://localhost:8080/ords/ started message when i start the listener.
    and using Apex URL as http://localhost:7780/pls/htmldb.
    What are the possibilities for this issues?
    Please help me on this.
    Thanks
    Chandran

    Apex listener version is 2.0.9
    Apex version is 4.2

  • Tables for delivery and stock transport orders

    Hi Members,
    I have a requirement where i have to display (in a report output) a requirement quantity of deliveries and stock transport orders which are displayed in MD04 transaction for particular material and plant.
    I don't know which tables these quantities sit into.
    If you know please help.
    Points will be suitably rewarded.
    Reagrds,
    Boby

    >
    Boby wrote:
    > Hi Members,
    >
    > I have a requirement where i have to display (in a report output) a requirement quantity of deliveries and stock transport orders which are displayed in MD04 transaction for particular material and plant.
    > I don't know which tables these quantities sit into.
    > If you know please help.
    > Points will be suitably rewarded.
    >
    > Reagrds,
    > Boby
    if you only have to display deliveries and stock transport orders you can take LIKP and LIPS for the deliveries and LTAK and LTAP for transport orders.
    for all the other elements displayed by MD04 we would have to know about your setup: are you using dispo-areas (which would populate tables MDMA ...) so in that case please provide more information.

  • Report for Asset number and its Purahcse order number

    Hello Friends,
    Please give me details of report for Asset number and its Purchase order number .
    Regards
    Nilesh Vakil

    hi,
    GO to ME2N...
    use SHIFT + F4..
    there check for the acc. assign cata. field and input the asset  and execute..
    Regards
    Priyanka.P

  • Purchase orders and their open order quantity with their due dates.

    hi friends
    i need to build  a query  where i can see the purchase orders and their open order quantity and their respective due delivery dates.i have never done  this.
    ME2M serves my requirement  upto little but i cannot see the delivery dates in that report.
    please help mein finding the steps involved in building the query.
    Thanks
    Alahari

    Use the table EKPO and EKKO
    adhoc querry is a tool in which we can create report
    to get report we have to use three t. codes
    1.sq03-->is for to create user group
    2.sq02--.is for infoset Querry
    3.Sq01-->for exact querry
    try with these codes or revert with ur response
    follow the link for query creation
    First check this link,
    SAP Query Creation
    SAP Query -A Reporting Tool for Functional Consultants(Part 2)
    SAP Query 1
    SAP Query -A Reporting Tool for Functional Consultants (Part 1)
    Always after going to SQ02 or SQ01 T Code ,first click on Environment in the menu ->Query Areas-->
    Standard Area Client specific and then start creating the Infoset or else the query.
    Still if you are not satisfied means,please revert back.

  • Purchase orders and their open order quantity with their due delivery date

    hi friends
    i need to build a query where i can see the purchase orders and their open order quantity and their respective due delivery dates.i have never done this.
    ME2M serves my requirement upto little but i cannot see the delivery dates in that report.
    please help mein finding the steps involved in building the query.
    Thanks
    Alahari

    Deliver date is available in table EKET field EINDT.
    Use table : EKKO ,EKPO, EKET.

  • How to Identify open Stock Transport Orders and their Purchase Order No?

    I am looking for the most efficient way, with the best SAP tables, to read , to get  STOs and their Purchase Order numbers.
    Also, what would be the best way to get its related Sales Order Number.
       Thank-You.

    STO's : EKPO-PSTYP = 7
    SO : VBFA-VBTYP_N = 'V', AND VBFA-VBTYP_V = 'C',

  • How to identify difference between Configure To Order (CTO) and Engineer To Order (ETO) items

    Hi All,
    We are working on Oracle Database 10g
    We have to develop a code which involves Configure To Order (CTO) and Engineer To Order (ETO) items.
    Can anyone advise is there any table and the corresponding column in the database which will help identify if an item is a CTO or ETO.
    Regards,
    Shruti

    Shruti,
    Have you checked eTRM website? -- http://etrm.oracle.com
    Please also see (How To Find the VIEW or TABLE That Populates a Form So That a 'Custom Report' Can Be Created Using Same VIEW or TABLE (Doc ID 604772.1)).
    Thanks,
    Hussein

  • Table for  the PO Date and Stock Transfer Order Date of a material no

    Hello Everyone!
    I am having a requirement where I want both the Purchase Order Date and Stock Transfer Order Date of a perticular material no.
    On the basis of difference of these two dates I want to find out the period for which the material was present in supplying plant.
    I am not getting the table through which I can get these two dates for a material.
    Please help me out.
    Its urgent.

    hi,
    see these tables:
         EKKO – Purchase Order Header Table
         EKPO – Purchase Order Item  Table
         EKBE – PO History table.
    reward if its useful

  • I ordered the full creative cloud on sunday and received an order number but still can't open any of the programs. When i check the status of my order online, it says it can't find it. Is this normal after 3 days?

    I ordered the full creative cloud on sunday and received an order number but still can't open any of the programs. When i check the status of my order online, it says it can't find it. Is this normal after 3 days? I tried asking in a chat window instead of the forum but no one answered and after about ten minutes my screen restarted and closed the chat window down. It seems a little frustrating not knowing what happened to my order and not being able to contact anyone. Is all this usual with Adobe or are they just having technical problems this week?

    Does your Cloud subscription show on your account page?
    https://www.adobe.com/account.html for subscriptions on your Adobe page
    This is an open forum, not Adobe support... you need Adobe staff to help
    Adobe contact information - http://helpx.adobe.com/contact.html
    -Select your product and what you need help with
    -Click on the blue box "Still need help? Contact us"
    -or by telephone http://helpx.adobe.com/x-productkb/global/phone-support-orders.html

Maybe you are looking for