Anyone w/ a 23" Cinema display?

I currently have a 22" inch cionema display (the first model) and am thinking of replacing it. I have second gen. dual 1.85 G5 so I have the right connection and don't need a new card.
Here's my question. Can anyone with one tell me how long the cord is? I keep my computer and the end of a long desk. The 22" JUST makes it. Apple couldn't tell me how longf the cord is, so I thought I'd ask here.

My point in telling you this (which I realized was not obvious) is that you find ways to extend the cable now that it is a standard DVI cable.

Similar Messages

  • Cannot get my 30" cinema display to come on after power outage

    I have a 30" cinema display running with my 2010 mac pro...all was fine, then we had a power outage last night. When I started the computer the next morning, computer came on but no monitor. So I took the display to apple store and they started on a mac book pro , no problem. When I went home and hooked everything back up to my mac pro, the 30" display will not work but a 20" cinema display I have did. Very confusing
    Please help if anyone can
    thanks

    The 30" cinema display has a cable that accepts inputs from its custom power brick, a Dual-Link DVI, a USB-2, and a FireWire-400.
    For a Silver Tower Mac Pro, you must connect the power and Dual-Link DVI.
    USB is needed by the display (for Brightness and possibly other controls from the Mac), and to run the convenience USB ports if desired.
    NB> Keyboards connected through the USB hub on the display cannot generate "snag key" codes early enough to be used at Startup. If you need to Option-Boot, you will need to plug your keyboard directly into a USB on the chassis.
    You need not connect FireWire unless you wish to use the hub and convenience ports on the display. It may require a FireWire 800 to 400 cable or adapter. (The adapter is good to place permanently, and its length (short) is good. For any other use, these adapters seem to "grow legs and walk away", so an adapter cable is superior.

  • Under Windows 7 Ultimate x64 and Boot Camp, my 27 inch Apple LED Cinema Display checks out as a Generic PnP Monitor and is shown as NOT HDCP compliant.  I haven't been able to find any kind of an .inf file to use.  Does anyone have a solution?

    Under Windows 7 Ultimate x64 and Boot Camp, my 27 inch Apple LED Cinema Display checks out as a Generic PnP Monitor and is shown as NOT HDCP compliant.  I haven't been able to find any kind of an .inf file to use.  Does anyone have a solution?  Or is Apple's implementation of HDCP (if it's there) incomplete?

    I am having this same issue. Im not sure if this is the cause but I think this is keeping PowerDVD Ultra 11 from playing back Bluray under Windows 7 / Bootcamp

  • Does anyone know how to connect an older 20" cinema display with the (ADC) adapter end and connect it to a MacBook Pro 17" 2008 model (DVI) ?????

    Does anyone know how to connect an older 20" cinema display with the (ADC) adapter end and connect it to a MacBook Pro 17" 2008 model (DVI) ?????

    I believe you naeed the Apple ADC to DVI adapter.

  • 24" Cinema display is flickering every 30 seconds or so. Has anyone found a solution?

    I have a 2009 Power Mac tower with a 24" cinema display also 2009. About a year ago the display started flickering, like it was turning on and off. I've got a duel display set up and the other one (older acrylic 20") works fine. I've checked the cords, updated to the latest soft wear, at least I think I have. I see others having the same issue. Has anyone found a solution? This is really annoying when trying to do graphics work. Any help would be much appreciated

    Hi 517 Design, 
    Thanks for visiting Apple Support Communities. 
    If you are seeing flickering on your Cinema Display, you can find many additional troubleshooting tips in this guide that can be helpful:
    Apple computers: Troubleshooting issues with video on internal or external displays - Apple Support
    Best Regards,
    Jeremy

  • PLEASE HELP! Does anyone have the software for the old 20" cinema display?

    CAN ANYONE HELP?! Does anyone have the software for the old 20" cinema display model number M88932M/A? (brought early 2004- the version with no control button) I can't find my manual or software CD for my Apple Display anywhere - I can't remember if the screen was even shipped with them. Because do not have this software I can't control anything to do with my screen e.g the brightness/contrast etc.
    I can't find the link to download the software anywhere on the apple website! (I have spent hours looking). If you know the link, I'd be really grateful if you could email it to to me. Or does anyone have the software CD that I could borrow and then return immediately? Please get in touch if you do. Many thanks! email address: [email protected]

    Hi Nathan,
    Thank you so much that was very kind of you! You must have the same screen as me as mine is the clear fronted on too.
    I have downloaded the OS X version, When I went to install it, but I got a message up saying the software was already on my machine. It must part of the Tiger OS, becuase I haven't installed anything.
    I have a quick question for you . . . Should the software you put up for me enable to me run "Display Calibrator Assistant" in the System preference or is the software from the CD hidden something else and I am looking in the wrong place on my mac?
    I did read somewhere when I got under the apple menu there should be a "monitor" menu - I don't have that but that maybe a classic thing?
    Many thanks for you help I really appreciate it!
    Purplecrazymoo

  • HT1338 Today when connecting my MB Pro Retina Display to my 27" LED Cinema Display instead of mirroring (which worked fine in the past) both screens are black with a large arrow cursor. I'm unable to resolve this. Anyone have a similar experience?

    Today when connecting my MB Pro Retina Display to my 27" LED Cinema Display instead of mirroring (which worked fine in the past) both screens are black with a large arrow cursor. I'm unable to resolve this. Anyone have a similar experience?

    I think what may be your main issue here is that the 2011
    server has the Intel integrated HD3000 and is is struggling
    to run both a Thuderbolt display and a second monitor.
    When looking at specs for Thunderbolt Display, it is stated
    that the 2011 Mini Server can only support one.  Adding that
    Dell monitor with 1920x1200 display may just be too many
    pixels for the HD3000 to handle.
    You may want to try setting the Dell to a lower resolution
    to test the theory to see what happens.  It is however,
    possible that any additional monitor when using the Thunderbolt
    display may over tax the HD3000 graphics.
    FWIW personally, I have been running a 2011 Mini Server w/ Thunderbolt
    display for almost a year now without any issues.  However, I don't
    use a second monitor.

  • New cinema display on Mac Pro monitor keeps turning off/going dark. Support told me a keyboard shortcut (something like option R L)... I'd appreciate it if anyone knows it. I had this problem when i 1st bought it 2 months ago.

    My new cinema display fro mac pro just went dark. When I 1st bought it, the display wouldn't turn on.I called support and they gave me a keyboard shortcut - something like Option+R+L - that you held down for 2 restart cycles. Then it magically turned on. I can't remember the sequence and I'm afraid to guess! I'd appreciate if anyone knows the trick. I'm also wondering if I should bring this display back...

    Cassandra from Apple Support ROCKS!!!! She's a supervisor somewhere and should have a raise. Pleasant, smart and professional with a customer who wouldn't take "I don't know" for an answer.
    If your cinema display goes dark:
    1. shut down computer
    2. restart
    3. immediately hold down Command-Option-P-R keys simultaneously for a few minutes (seems forever)
    4. keep holding keys for 2 startup cycles
    5. release and go back to work if you're lucky to have a restored screen

  • Does anyone know if I can connect my 2008 macbook to a new 27" cinema display?

    Does anyone know if I can connect my 2008 macbook to a new 27" cinema display? I was told there is no adaptor to connect the two, and that my macbook could not provide the power to the display, but the display looks like it plugs in for power. I'm confused...

    Hi. I have updated my Garmin 255 on my MacBook Pro. I downloaded the files and App from the Garmin site, it works just fine.
    Stedman

  • Does anyone have two 24" LED Cinema Displays on their Mac Pro?

    I'm wondering if there are any other Mac Pro users out there with two 24" LED Cinema Displays? If so, are you able to adjust the brightness of both displays? For me, no matter which brightness slider I adjust in System Preferences, only the brightness of one of the displays is adjusted.
    I originally created a thread last September:
    http://discussions.apple.com/thread.jspa?threadID=2160532
    If you have this problem too, please report it to <http://bugreporter.apple.com/>. My original Radar bug was #7222745, and it was found to be a duplicate of #6828443. Based on the IDs, I'd say this has been a known issue for at least a year.
    Thanks,
    Patrick

    I am using logitech G19 mouse and Naga Razer Epic, my current suspect that is their official driver which make my OS X 64bit kernl go nut. Does Logitech Control Center work for later version of their products such as G19?
    If I plggued in the G19 without installing their official gamepanel software, The heyboard still work, volume control slider works like a charm. I just get no advantages from the LCD screen (kind of pointless).
    If I install the razer mac driver, I keep seeing error log in console for the kzcorengineand razercorenginer process.
    Idid clean install of Mac OS X and have not experienced freeze except once when I was plugging in my 500gb transcend external drive. This Ext. Drive require two usb slot for power and transfer data.
    I am not sure if the freeze was coincidental or related to the transcend external drive I used. I did a directory permission repair and a repair to the mac drive, how things seems to stabilised.
    However I want to take my test further to install office 2011 to see if it cause those random unpredictable freeze again.
    Sigh, I paid $200 for such a good keyboard, but they have bad apple support. I dont like the apply ketyboard and magic mouse. It's immpossible to touch type on and even harder to play any game at all.
    Wayne, when you use your logitech product, do you install the product specific driver for each product plus LCC? or you just install LCC.
    Thank you

  • Has anyone else had problems with long wakeup times on Cinema displays?

    We're having problems with long wakeup times on our Cinema Display. Noticed it after the Maverick update.
    Need help please. This thing is nothing more than a boat anchor to my developers... frustrating, expensive boat anchor.
    Thoughts?
    Thanks,
    Jeff Stutzman

    Hey Jeff,
    Thanks for the question. I understand you are experiencing issues with an external display and your MacBook Air. The following resource may provide a solution:
    Apple computers: Troubleshooting issues with video on internal or external displays
    http://support.apple.com/kb/ht1573
    While you should give all of the troubleshooting steps a whirl, definitely make sure to follow the steps in this section:
    Reset the system
    You can reset the Mac's parameter RAM and SMC.
    Thanks,
    Matt M.

  • Anyone in London still have their 30" Cinema display box??

    I need to send a 30" Cinema Display abroad but haven't got the box/polystyrene any more. For ease of packing I hoped someone might still have theirs and want rid of it?!
    Thanks

    Did you had any luck? Seriously...my monitor went black too..but i suspect it would be video card. Did you try changing your video card.

  • How to connect my Cinema Display as a second monitor

    I just purchased a new 27-inch iMac, and I explained to the Apple folks that I had a 17-inch cinema display (silver clad model) that I wanted to connect, for a dual monitor set up. They told me just to get the Mini DisplayPort to DVI Adapter, but I was surprised to realize that's not going to work.
    Can anyone tell me how to do this, and what connector is actually needed? I have the big old white power brick that I bought to daisy chain my old 17 and 23 inch displays with my old configuration (Mac Pro).
    Or can you not have a second monitor with an iMac?
    Thanks in advance.

    Hi Cathy,
    What connector is on that Cinema? ADC, VGA, or DVI?
    Video Card:
    GeForce GTX 675MX
    VRAM Type:
    GDDR5
    Details:
    This model has a NVIDIA GeForce GTX 675MX graphics processor with 1 GB of dedicated GDDR5 memory. At the time of purchase, it can be custom configured with a NVIDIA GeForce GTX 680MX with 2 GB of dedicated GDDR5 memory for an extra US$150.
    Standard VRAM:
    1 GB
    Maximum VRAM:
    1 GB*
    Built-in Display:
    27" 16:9 Widescreen
    Native Resolution:
    2560x1440
    Details:
    This model has a 27" LED-backlit 16:9 widescreen TFT active matrix display with IPS technology and a native resolution of 2560x1440. Apple also reports that the "cover glass is fully laminated to the LCD and an anti-reflective coating is applied." Previous Aluminum iMac models have the LCD covered by glass. The company no longer reports viewing angle or contrast ratio, however. Site sponsor Mission Repair offers free diagnosis of iMac hardware problems and a 24-hour repair service for this iMac. Display replacement, keyboard replacement, a hard drive upgrade service, and more are provided.
    2nd Display Support:
    Dual/Mirroring*
    2nd Max. Resolution:
    2560x1600 (x2)
    Details:
    *This model can simultaneously support two external displays up to 2560x1600 via Thunderbolt.
    http://www.everymac.com/systems/apple/imac/specs/imac-core-i7-3.4-27-inch-alumin um-late-2012-specs.html

  • Where and how can I buy a new AC adaptor for a 30" HD cinema display?

    I bought large numbers of Apple products in Hong Kong but have since moved to a remote area of the Philippines where internation telephone calls are extremely difficult.
    The AC adaptor of my 30" HD cinema display with aluminum case has been lost so I need to find out the price and order a new one.  However the Apple shop (Hong Kong) on-line has no way to ask the price or place an order for this item.  There is no on-line form no email addrees, nothing except Hong Kong phone numbers.
    Can anyone please advise what I can do?  Please don't suggest going to the local service center.  I will never go back to our local service center after what they did last time.
    Thank you.
    Frank

    Thank You.
    I have emailed them to ask if they will deliver to Hong Kong via USPS.
    I may need a video card for a MacPro so I will order that from them also.
    Thanks again
    Frank

  • Cinema display 24" burned and died

    I wonder if anyone can give me any advice. I bought the £650 24" Apple Cinema Display 18 months ago from the Apple Store. On Friday I got a burning smell and it died.
    Took it into the Apple store on Monday. They said it is out of warranty and that they could repair it for £500 - LCD fail.
    Does anyone know if I have any consumer rights with this? Surely I should expect a £650 monitor to last longer than 18 months? At the time of purchase they didn't even offer me an extended apple care warranty.
    Apple products usually have such long lives. I have an 8 year old ipod and 4 year old MBP and they are both still going strong!

    Update: This may be useful for anyone else who has had the same issue.
    Took my display to an independent but Apple Authorised repair centre where I had them run a diagnostic test on it. Turns out it was the logic board which had burnt out which they said was a manufacturing fault.
    So the £500 repair quoted by the Genius Bar actually turned out to be £80.
    I also had this repair done free of charge as I used my my consumer rights - the Sales of Goods Act 1979. This applies to the UK only and should cover you for up to 6 years.
    It also states on the Apple warranty page that in the EU they cover items for 2 years if it's proved to be a manufacturing fault.
    Thanks Apple, my cinema display is now back on my desk
    Hope this post may help someone else in the same predicament!

Maybe you are looking for

  • Cannot install iTune for Windows

    Hi, I just bought an iPod nano and I tried to install iTune for windows 64 bit but I always get an error message concerning a Boujour service that it seems I don't have the rights to start. Here are some of the installation events Windows Installer a

  • Creative cloud application manager is blank

    When I run the Creative Cloud Application Manager, it is blank with nothing to download.  Can anyone help?

  • Font preview not available

    I've clicked on the box in preferences so that my fonts have a preview, but it still don't have a preview. How can I fix the problem?

  • Problem with pass data to smartform

    hi guru. i found a question and need advise for solve this problem. i create a smartform about tax, this form use sorted and index data from zreport to display in form. i declare structure of tab and structure of type in report as same as structure o

  • Getting the right nvidia drivers?/gnome3 problems (which are realated)

    I am having trouble getting the correct drivers for my graphics card, and problems with gnome3. before I wright anymore I would like to say that I have seen and heard about "the arch way" and that moderators can be unnecessarily rude sometimes, I hop